NEWS
Probleme mit Zigbee Adapter 1.9.5
ioBroker Allgemein
66
Beiträge
5
Kommentatoren
6.1k
Aufrufe
4
Watching
-
@jens-g
Dann muss der auch in /dev/serial/by-id auftauchen.
-
@thomas-braun
Sollte man meinen aber immer nur not found.
Konnte den zum Glück über ls /dev und dann unter ttyUSB1 findenHier mal ein Bild vom aktuellen Zustand meines Zigbee Adapters
@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:
Sollte man meinen aber immer nur not found.
Konnte den zum Glück über ls /dev und dann unter ttyUSB1 findenDann passt da schon auf dem Hardware-Level was nicht.
-
@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:
Sollte man meinen aber immer nur not found.
Konnte den zum Glück über ls /dev und dann unter ttyUSB1 findenDann passt da schon auf dem Hardware-Level was nicht.
@thomas-braun
Meinst den Stick oder SDkarte obwohl Iobroker läuft ja.
Hab den Stick bei ebay gekauft hier: https://www.ebay.de/itm/384663961483Wo liegt sonst der Fehler
-
@thomas-braun
Meinst den Stick oder SDkarte obwohl Iobroker läuft ja.
Hab den Stick bei ebay gekauft hier: https://www.ebay.de/itm/384663961483Wo liegt sonst der Fehler
@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:
Wo liegt sonst der Fehler
Zeig mal die Langfassung von
iob diag -
@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:
Wo liegt sonst der Fehler
Zeig mal die Langfassung von
iob diag@thomas-braun
Wie kann ich das sinnvoll bzw. lesbar hier einfügen?Bin kurz zum Sport bis später
So bin wieder da:
Hier ist die Zusammenfassung:======================= SUMMARY ======================= v.2023-10-10 Static hostname: smarthomepi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.103-v7l+ Architecture: arm Installation: native Kernel: armv7l Userland: armhf Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 1 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 Recommended versions are nodejs 18.19.0 and npm 10.2.3 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 3.8G 797M 2.4G 0.0K 605M 2.9G Swap: 99M 0B 99M Total: 3.9G 797M 2.5G Active iob-Instances: 14 Active repo(s): stable ioBroker Core: js-controller 5.0.16 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : smarthomepi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : smarthomepi - enabled, port: 8085, bind: 0.0.0.0, run as: admin Objects: 4729 States: 1692 Size of iob-Database: 17M /opt/iobroker/iobroker-data/objects.jsonl 4.8M /opt/iobroker/iobroker-data/objects.json.migrated 4.8M /opt/iobroker/iobroker-data/objects.json.bak.migrated 7.4M /opt/iobroker/iobroker-data/states.jsonl 464K /opt/iobroker/iobroker-data/states.json.migrated 464K /opt/iobroker/iobroker-data/states.json.bak.migrated 0 /opt/iobroker/iobroker-data/states.json.brokenkannst du dort irgendwelche Probleme erkennen?
-
@thomas-braun
Wie kann ich das sinnvoll bzw. lesbar hier einfügen?Bin kurz zum Sport bis später
So bin wieder da:
Hier ist die Zusammenfassung:======================= SUMMARY ======================= v.2023-10-10 Static hostname: smarthomepi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.103-v7l+ Architecture: arm Installation: native Kernel: armv7l Userland: armhf Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 1 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 Recommended versions are nodejs 18.19.0 and npm 10.2.3 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 3.8G 797M 2.4G 0.0K 605M 2.9G Swap: 99M 0B 99M Total: 3.9G 797M 2.5G Active iob-Instances: 14 Active repo(s): stable ioBroker Core: js-controller 5.0.16 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : smarthomepi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : smarthomepi - enabled, port: 8085, bind: 0.0.0.0, run as: admin Objects: 4729 States: 1692 Size of iob-Database: 17M /opt/iobroker/iobroker-data/objects.jsonl 4.8M /opt/iobroker/iobroker-data/objects.json.migrated 4.8M /opt/iobroker/iobroker-data/objects.json.bak.migrated 7.4M /opt/iobroker/iobroker-data/states.jsonl 464K /opt/iobroker/iobroker-data/states.json.migrated 464K /opt/iobroker/iobroker-data/states.json.bak.migrated 0 /opt/iobroker/iobroker-data/states.json.brokenkannst du dort irgendwelche Probleme erkennen?
@jens-g
In der Zusammenfassung nicht viel.
iob nodejs-updatebitte ausführen. Und dann die Langfassung bekannt machen.
-
@thomas-braun
Wie kann ich das sinnvoll bzw. lesbar hier einfügen?Bin kurz zum Sport bis später
So bin wieder da:
Hier ist die Zusammenfassung:======================= SUMMARY ======================= v.2023-10-10 Static hostname: smarthomepi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.103-v7l+ Architecture: arm Installation: native Kernel: armv7l Userland: armhf Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 1 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 Recommended versions are nodejs 18.19.0 and npm 10.2.3 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 3.8G 797M 2.4G 0.0K 605M 2.9G Swap: 99M 0B 99M Total: 3.9G 797M 2.5G Active iob-Instances: 14 Active repo(s): stable ioBroker Core: js-controller 5.0.16 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : smarthomepi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : smarthomepi - enabled, port: 8085, bind: 0.0.0.0, run as: admin Objects: 4729 States: 1692 Size of iob-Database: 17M /opt/iobroker/iobroker-data/objects.jsonl 4.8M /opt/iobroker/iobroker-data/objects.json.migrated 4.8M /opt/iobroker/iobroker-data/objects.json.bak.migrated 7.4M /opt/iobroker/iobroker-data/states.jsonl 464K /opt/iobroker/iobroker-data/states.json.migrated 464K /opt/iobroker/iobroker-data/states.json.bak.migrated 0 /opt/iobroker/iobroker-data/states.json.brokenkannst du dort irgendwelche Probleme erkennen?
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: smarthomepi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 16:14:37 up 4:22, 1 user, load average: 0.27, 0.13, 0.13 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-01-05 16:14:37 CET Universal time: Fri 2024-01-05 15:14:37 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 763M 2.5G 0.0K 606M 3.0G Swap: 99M 0B 99M Total: 3.9G 763M 2.6G 3838 M total memory 763 M used memory 284 M active memory 998 M inactive memory 2468 M free memory 81 M buffer memory 525 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 8.6G 20G 31% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 768M 712K 768M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Jan 5 11:51:47 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:2B:81:55 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=fb4b5961-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Fri Jan 5 11:51:48 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Fri Jan 5 11:51:48 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Jan 5 11:51:51 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.2G /var/ 1.6G /var/cache/apt 1.6G /var/cache 1.5G /var/cache/apt/archives 1.4G /var/log/journal/47f40db81a924d0ea15f089479b9a154 Archived and active journals take up 1.3G in the file system. /opt/iobroker/backups: 56M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 304M /opt/iobroker/iobroker-data/ 199M /opt/iobroker/iobroker-data/files 71M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 17M /opt/iobroker/iobroker-data/objects.jsonl 14M /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/userwidgets/abfallkalender_2023 (1)-cropped (1).html 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : smarthomepi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : smarthomepi - enabled + system.adapter.daswetter.0 : daswetter : smarthomepi - enabled + system.adapter.discovery.0 : discovery : smarthomepi - enabled + system.adapter.dwd.0 : dwd : smarthomepi - enabled + system.adapter.influxdb.0 : influxdb : smarthomepi - enabled, port: 8086 + system.adapter.info.0 : info : smarthomepi - enabled + system.adapter.iqontrol.0 : iqontrol : smarthomepi - enabled + system.adapter.javascript.0 : javascript : smarthomepi - enabled + system.adapter.maxcul.0 : maxcul : smarthomepi - enabled + system.adapter.mqtt.0 : mqtt : smarthomepi - enabled, port: 1886, bind: 0.0.0.0 system.adapter.scenes.0 : scenes : smarthomepi - disabled + system.adapter.sonoff.0 : sonoff : smarthomepi - enabled, port: 1883, bind: 192.168.188.159 + system.adapter.tankerkoenig.0 : tankerkoenig : smarthomepi - enabled system.adapter.terminal.0 : terminal : smarthomepi - disabled, port: 8099, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : smarthomepi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthomepi - enabled, port: /dev/ttyUSB1 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : smarthomepi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : smarthomepi - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : smarthomepi - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : smarthomepi - enabled, port: 1883, bind: 192.168.188.159 + system.adapter.web.0 : web : smarthomepi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthomepi - enabled, port: /dev/ttyUSB1 ioBroker-Repositories stable : http://repo.iobroker.live/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "daswetter" : 3.1.11 , installed 3.1.11 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.16 [Updatable] Adapter "maxcul" : 1.3.1 , installed 1.3.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.9.5 , installed 1.9.5 Objects and States Please stand by - This may take a while Objects: 4729 States: 1683 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Get:3 https://deb.nodesource.com/node_18.x bullseye InRelease [4586 B] Fetched 4586 B in 6s (711 B/s) Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 10819 773/sshd: /usr/sbin tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 10711 451/influxd tcp 0 0 192.168.188.159:1883 0.0.0.0:* LISTEN 1001 12273 940/io.sonoff.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 10984 959/io.mqtt.0 tcp 0 0 0.0.0.0:1887 0.0.0.0:* LISTEN 1001 10985 959/io.mqtt.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12070 766/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 12055 766/iobroker.js-con tcp6 0 0 :::8081 :::* LISTEN 1001 13828 853/io.admin.0 tcp6 0 0 :::8085 :::* LISTEN 1001 17691 1573/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 10821 773/sshd: /usr/sbin tcp6 0 0 :::8086 :::* LISTEN 999 11968 451/influxd udp 0 0 0.0.0.0:42406 0.0.0.0:* 108 11826 402/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13695 765/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11824 402/avahi-daemon: r udp6 0 0 :::546 :::* 0 10763 765/dhcpcd udp6 0 0 :::5353 :::* 108 11825 402/avahi-daemon: r udp6 0 0 :::53005 :::* 108 11827 402/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-01-05 16:15:13.432 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Maximale_Temperatur_value with 2 2024-01-05 16:15:13.442 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wind_valueB with Mäßiger Wind aus Nordosten 2024-01-05 16:15:13.454 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wind_value with Mäßiger Wind aus Nordosten 2024-01-05 16:15:13.465 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wind_idB with 34 2024-01-05 16:15:13.476 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wind_id with 10 2024-01-05 16:15:13.485 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.windIconURL with /adapter/daswetter/icons/viento-wind/Beaufort-White/34.png 2024-01-05 16:15:13.495 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wetter_Symbol_value2 with Teils bewölkt 2024-01-05 16:15:13.505 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wetter_Symbol_value with Teils bewölkt 2024-01-05 16:15:13.515 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wetter_Symbol_id2 with 2 2024-01-05 16:15:13.531 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wetter_Symbol_id with 2 2024-01-05 16:15:13.541 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.iconURL with /adapter/daswetter/icons/tiempo-weather/galeria5/SVG/Color/2.svg 2024-01-05 16:15:13.556 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Tag_value with Donnerstag 2024-01-05 16:15:13.565 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wetterbedingungen_value with Den ganzen Tag über Sonne 2024-01-05 16:15:13.575 - debug: daswetter.0 (6914) 7 days forecast done 2024-01-05 16:15:13.581 - debug: daswetter.0 (6914) exit, all done 2024-01-05 16:15:13.582 - debug: daswetter.0 (6914) timer killed 2024-01-05 16:15:13.583 - debug: daswetter.0 (6914) Plugin sentry destroyed 2024-01-05 16:15:13.584 - info: daswetter.0 (6914) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment 2024-01-05 16:15:14.116 - info: daswetter.0 (6914) cleaned everything up... 2024-01-05 16:15:14.149 - info: host.smarthomepi instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-01-05 16:15:14.377 - info: dwd.0 (6895) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-01-05 16:15:14.980 - info: host.smarthomepi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-01-05 16:15:17.406 - info: admin.0 (853) <== Disconnect system.user.admin from ::ffff:192.168.188.21 2024-01-05 16:15:25.678 - info: admin.0 (853) ==> Connected system.user.admin from ::ffff:192.168.188.21 2024-01-05 16:15:25.886 - info: zigbee.0 (3432) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"SHK","serialNumber":"868","vendorId":"0403","productId":"6001"},{"path":"/dev/ttyUSB1","manufacturer":"ITead","serialNumber":"78c227e46ed8ed11ad85736162c613ac","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyAMA0"}] -
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: smarthomepi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 16:14:37 up 4:22, 1 user, load average: 0.27, 0.13, 0.13 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-01-05 16:14:37 CET Universal time: Fri 2024-01-05 15:14:37 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 763M 2.5G 0.0K 606M 3.0G Swap: 99M 0B 99M Total: 3.9G 763M 2.6G 3838 M total memory 763 M used memory 284 M active memory 998 M inactive memory 2468 M free memory 81 M buffer memory 525 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 8.6G 20G 31% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 768M 712K 768M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Jan 5 11:51:47 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:2B:81:55 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=fb4b5961-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Fri Jan 5 11:51:48 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Fri Jan 5 11:51:48 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Jan 5 11:51:51 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.2G /var/ 1.6G /var/cache/apt 1.6G /var/cache 1.5G /var/cache/apt/archives 1.4G /var/log/journal/47f40db81a924d0ea15f089479b9a154 Archived and active journals take up 1.3G in the file system. /opt/iobroker/backups: 56M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 304M /opt/iobroker/iobroker-data/ 199M /opt/iobroker/iobroker-data/files 71M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 17M /opt/iobroker/iobroker-data/objects.jsonl 14M /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/userwidgets/abfallkalender_2023 (1)-cropped (1).html 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : smarthomepi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : smarthomepi - enabled + system.adapter.daswetter.0 : daswetter : smarthomepi - enabled + system.adapter.discovery.0 : discovery : smarthomepi - enabled + system.adapter.dwd.0 : dwd : smarthomepi - enabled + system.adapter.influxdb.0 : influxdb : smarthomepi - enabled, port: 8086 + system.adapter.info.0 : info : smarthomepi - enabled + system.adapter.iqontrol.0 : iqontrol : smarthomepi - enabled + system.adapter.javascript.0 : javascript : smarthomepi - enabled + system.adapter.maxcul.0 : maxcul : smarthomepi - enabled + system.adapter.mqtt.0 : mqtt : smarthomepi - enabled, port: 1886, bind: 0.0.0.0 system.adapter.scenes.0 : scenes : smarthomepi - disabled + system.adapter.sonoff.0 : sonoff : smarthomepi - enabled, port: 1883, bind: 192.168.188.159 + system.adapter.tankerkoenig.0 : tankerkoenig : smarthomepi - enabled system.adapter.terminal.0 : terminal : smarthomepi - disabled, port: 8099, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : smarthomepi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthomepi - enabled, port: /dev/ttyUSB1 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : smarthomepi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : smarthomepi - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : smarthomepi - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : smarthomepi - enabled, port: 1883, bind: 192.168.188.159 + system.adapter.web.0 : web : smarthomepi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthomepi - enabled, port: /dev/ttyUSB1 ioBroker-Repositories stable : http://repo.iobroker.live/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "daswetter" : 3.1.11 , installed 3.1.11 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.16 [Updatable] Adapter "maxcul" : 1.3.1 , installed 1.3.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.9.5 , installed 1.9.5 Objects and States Please stand by - This may take a while Objects: 4729 States: 1683 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Get:3 https://deb.nodesource.com/node_18.x bullseye InRelease [4586 B] Fetched 4586 B in 6s (711 B/s) Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 10819 773/sshd: /usr/sbin tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 10711 451/influxd tcp 0 0 192.168.188.159:1883 0.0.0.0:* LISTEN 1001 12273 940/io.sonoff.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 10984 959/io.mqtt.0 tcp 0 0 0.0.0.0:1887 0.0.0.0:* LISTEN 1001 10985 959/io.mqtt.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12070 766/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 12055 766/iobroker.js-con tcp6 0 0 :::8081 :::* LISTEN 1001 13828 853/io.admin.0 tcp6 0 0 :::8085 :::* LISTEN 1001 17691 1573/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 10821 773/sshd: /usr/sbin tcp6 0 0 :::8086 :::* LISTEN 999 11968 451/influxd udp 0 0 0.0.0.0:42406 0.0.0.0:* 108 11826 402/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13695 765/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11824 402/avahi-daemon: r udp6 0 0 :::546 :::* 0 10763 765/dhcpcd udp6 0 0 :::5353 :::* 108 11825 402/avahi-daemon: r udp6 0 0 :::53005 :::* 108 11827 402/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-01-05 16:15:13.432 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Maximale_Temperatur_value with 2 2024-01-05 16:15:13.442 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wind_valueB with Mäßiger Wind aus Nordosten 2024-01-05 16:15:13.454 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wind_value with Mäßiger Wind aus Nordosten 2024-01-05 16:15:13.465 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wind_idB with 34 2024-01-05 16:15:13.476 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wind_id with 10 2024-01-05 16:15:13.485 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.windIconURL with /adapter/daswetter/icons/viento-wind/Beaufort-White/34.png 2024-01-05 16:15:13.495 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wetter_Symbol_value2 with Teils bewölkt 2024-01-05 16:15:13.505 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wetter_Symbol_value with Teils bewölkt 2024-01-05 16:15:13.515 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wetter_Symbol_id2 with 2 2024-01-05 16:15:13.531 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wetter_Symbol_id with 2 2024-01-05 16:15:13.541 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.iconURL with /adapter/daswetter/icons/tiempo-weather/galeria5/SVG/Color/2.svg 2024-01-05 16:15:13.556 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Tag_value with Donnerstag 2024-01-05 16:15:13.565 - debug: daswetter.0 (6914) insert NextDays.Location_1.Day_7.Wetterbedingungen_value with Den ganzen Tag über Sonne 2024-01-05 16:15:13.575 - debug: daswetter.0 (6914) 7 days forecast done 2024-01-05 16:15:13.581 - debug: daswetter.0 (6914) exit, all done 2024-01-05 16:15:13.582 - debug: daswetter.0 (6914) timer killed 2024-01-05 16:15:13.583 - debug: daswetter.0 (6914) Plugin sentry destroyed 2024-01-05 16:15:13.584 - info: daswetter.0 (6914) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment 2024-01-05 16:15:14.116 - info: daswetter.0 (6914) cleaned everything up... 2024-01-05 16:15:14.149 - info: host.smarthomepi instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-01-05 16:15:14.377 - info: dwd.0 (6895) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-01-05 16:15:14.980 - info: host.smarthomepi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-01-05 16:15:17.406 - info: admin.0 (853) <== Disconnect system.user.admin from ::ffff:192.168.188.21 2024-01-05 16:15:25.678 - info: admin.0 (853) ==> Connected system.user.admin from ::ffff:192.168.188.21 2024-01-05 16:15:25.886 - info: zigbee.0 (3432) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"SHK","serialNumber":"868","vendorId":"0403","productId":"6001"},{"path":"/dev/ttyUSB1","manufacturer":"ITead","serialNumber":"78c227e46ed8ed11ad85736162c613ac","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyAMA0"}]@jens-g
Zunächst solltest du doch
iob nodejs-updateausführen...
-
@jens-g
Zunächst solltest du doch
iob nodejs-updateausführen...
-
@thomas-braun
Sorry habe ich übersehern wird gerade gemacht auf Version 18.19@jens-g
apt policy udevsagt? Da wirst du dir die defekte Version eingehandelt haben.
Ich würde ohne hin von dem auslaufenden Bullseye-Release auf Debian 12 'Bookworm' (64Bit - Lite) wechseln. Das Thema wird ohnehin früher oder später auf dich zukommen. Kannste auch jetzt den Absprung machen. -
@jens-g
apt policy udevsagt? Da wirst du dir die defekte Version eingehandelt haben.
Ich würde ohne hin von dem auslaufenden Bullseye-Release auf Debian 12 'Bookworm' (64Bit - Lite) wechseln. Das Thema wird ohnehin früher oder später auf dich zukommen. Kannste auch jetzt den Absprung machen.======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: smarthomepi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 16:26:27 up 4:34, 1 user, load average: 1.92, 0.88, 0.47 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-01-05 16:26:27 CET Universal time: Fri 2024-01-05 15:26:27 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 794M 2.1G 0.0K 985M 2.9G Swap: 99M 0B 99M Total: 3.9G 794M 2.2G 3838 M total memory 794 M used memory 495 M active memory 1151 M inactive memory 2058 M free memory 238 M buffer memory 746 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 8.6G 20G 31% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 768M 712K 768M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Jan 5 11:51:47 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:2B:81:55 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=fb4b5961-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Fri Jan 5 11:51:48 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Fri Jan 5 11:51:48 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Jan 5 11:51:51 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.3G /var/ 1.6G /var/cache/apt 1.6G /var/cache 1.5G /var/cache/apt/archives 1.4G /var/log/journal/47f40db81a924d0ea15f089479b9a154 Archived and active journals take up 1.3G in the file system. /opt/iobroker/backups: 56M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 304M /opt/iobroker/iobroker-data/ 199M /opt/iobroker/iobroker-data/files 71M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 17M /opt/iobroker/iobroker-data/objects.jsonl 14M /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/userwidgets/abfallkalender_2023 (1)-cropped (1).html 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : smarthomepi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : smarthomepi - enabled system.adapter.daswetter.0 : daswetter : smarthomepi - enabled + system.adapter.discovery.0 : discovery : smarthomepi - enabled system.adapter.dwd.0 : dwd : smarthomepi - enabled + system.adapter.influxdb.0 : influxdb : smarthomepi - enabled, port: 8086 + system.adapter.info.0 : info : smarthomepi - enabled + system.adapter.iqontrol.0 : iqontrol : smarthomepi - enabled + system.adapter.javascript.0 : javascript : smarthomepi - enabled + system.adapter.maxcul.0 : maxcul : smarthomepi - enabled + system.adapter.mqtt.0 : mqtt : smarthomepi - enabled, port: 1886, bind: 0.0.0.0 system.adapter.scenes.0 : scenes : smarthomepi - disabled + system.adapter.sonoff.0 : sonoff : smarthomepi - enabled, port: 1883, bind: 192.168.188.159 + system.adapter.tankerkoenig.0 : tankerkoenig : smarthomepi - enabled system.adapter.terminal.0 : terminal : smarthomepi - disabled, port: 8099, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : smarthomepi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthomepi - enabled, port: /dev/ttyUSB1 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : smarthomepi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : smarthomepi - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : smarthomepi - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : smarthomepi - enabled, port: 1883, bind: 192.168.188.159 + system.adapter.web.0 : web : smarthomepi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthomepi - enabled, port: /dev/ttyUSB1 ioBroker-Repositories stable : http://repo.iobroker.live/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "daswetter" : 3.1.11 , installed 3.1.11 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.16 [Updatable] Adapter "maxcul" : 1.3.1 , installed 1.3.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.9.5 , installed 1.9.5 Objects and States Please stand by - This may take a while Objects: 4729 States: 1691 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 10819 773/sshd: /usr/sbin tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 10711 451/influxd tcp 0 0 192.168.188.159:1883 0.0.0.0:* LISTEN 1001 47485 8303/io.sonoff.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 50214 8330/io.mqtt.0 tcp 0 0 0.0.0.0:1887 0.0.0.0:* LISTEN 1001 50215 8330/io.mqtt.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 46977 8225/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 46970 8225/iobroker.js-co tcp6 0 0 :::8081 :::* LISTEN 1001 46039 8246/io.admin.0 tcp6 0 0 :::8085 :::* LISTEN 1001 50942 9090/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 10821 773/sshd: /usr/sbin tcp6 0 0 :::8086 :::* LISTEN 999 11968 451/influxd udp 0 0 0.0.0.0:42406 0.0.0.0:* 108 11826 402/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13695 765/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11824 402/avahi-daemon: r udp6 0 0 :::546 :::* 0 10763 765/dhcpcd udp6 0 0 :::5353 :::* 108 11825 402/avahi-daemon: r udp6 0 0 :::53005 :::* 108 11827 402/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-01-05 16:26:25.626 - info: host.smarthomepi instance system.adapter.maxcul.0 started with pid 8665 2024-01-05 16:26:28.481 - info: dwd.0 (8427) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-01-05 16:26:28.821 - info: maxcul.0 (8665) starting. Version 1.3.1 in /opt/iobroker/node_modules/iobroker.maxcul, node: v18.19.0, js-controller: 5.0.16 2024-01-05 16:26:29.179 - info: host.smarthomepi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-01-05 16:26:29.351 - info: maxcul.0 (8665) using serial device /dev/ttyUSB0@38400 2024-01-05 16:26:29.392 - info: maxcul.0 (8665) serialPort /dev/ttyUSB0 is open! 2024-01-05 16:26:29.709 - info: host.smarthomepi instance system.adapter.tankerkoenig.0 started with pid 9004 2024-01-05 16:26:31.417 - info: maxcul.0 (8665) CUL FW Version: V 1.67 nanoCUL868 2024-01-05 16:26:32.632 - info: tankerkoenig.0 (9004) starting. Version 3.3.7 in /opt/iobroker/node_modules/iobroker.tankerkoenig, node: v18.19.0, js-controller: 5.0.16 2024-01-05 16:26:32.695 - info: tankerkoenig.0 (9004) Adapter is already in daemon mode 2024-01-05 16:26:32.697 - warn: tankerkoenig.0 (9004) Sync time was too short (5). New sync time is 10 min 2024-01-05 16:26:32.698 - info: tankerkoenig.0 (9004) Sync time set to 10 minutes or 600000 ms 2024-01-05 16:26:33.708 - info: host.smarthomepi instance system.adapter.web.0 started with pid 9090 2024-01-05 16:26:34.180 - warn: zigbee.0 (8318) DeviceAvailability:Failed to ping 0xa4c1384e05b39d11 TS011F 2024-01-05 16:26:38.379 - info: web.0 (9090) starting. Version 6.1.10 in /opt/iobroker/node_modules/iobroker.web, node: v18.19.0, js-controller: 5.0.16 2024-01-05 16:26:38.832 - info: web.0 (9090) socket.io server listening on port 8085 2024-01-05 16:26:38.846 - info: web.0 (9090) http server listening on port 8085 2024-01-05 16:26:39.942 - info: tankerkoenig.0 (9004) Start first request 2024-01-05 16:26:44.375 - info: web.0 (9090) ==> Connected system.user.admin from ::ffff:192.168.188.162 2024-01-05 16:27:38.077 - info: admin.0 (8246) <== Disconnect system.user.admin from ::ffff:192.168.188.21 2024-01-05 16:27:38.085 - info: admin.0 (8246) <== Disconnect system.user.admin from ::ffff:192.168.188.21 admin 2024-01-05 16:27:38.713 - info: admin.0 (8246) ==> Connected system.user.admin from ::ffff:192.168.188.21 2024-01-05 16:27:41.881 - info: admin.0 (8246) ==> Connected system.user.admin from ::ffff:192.168.188.21 2024-01-05 16:27:42.203 - info: zigbee.0 (8318) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"SHK","serialNumber":"868","vendorId":"0403","productId":"6001"},{"path":"/dev/ttyUSB1","manufacturer":"ITead","serialNumber":"78c227e46ed8ed11ad85736162c613ac","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyAMA0"}] 2024-01-05 16:27:46.416 - info: admin.0 (8246) <== Disconnect system.user.admin from ::ffff:192.168.188.21So hier einmal die Langfassung nach nodejs Update.
pi@smarthomepi:~ $ apt policy udev udev: Installiert: 247.3-7+rpi1+deb11u2 Installationskandidat: 247.3-7+rpi1+deb11u2 Versionstabelle: *** 247.3-7+rpi1+deb11u2 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status -
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: smarthomepi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 16:26:27 up 4:34, 1 user, load average: 1.92, 0.88, 0.47 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-01-05 16:26:27 CET Universal time: Fri 2024-01-05 15:26:27 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 794M 2.1G 0.0K 985M 2.9G Swap: 99M 0B 99M Total: 3.9G 794M 2.2G 3838 M total memory 794 M used memory 495 M active memory 1151 M inactive memory 2058 M free memory 238 M buffer memory 746 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 8.6G 20G 31% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 768M 712K 768M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Jan 5 11:51:47 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:2B:81:55 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=fb4b5961-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Fri Jan 5 11:51:48 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Fri Jan 5 11:51:48 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Jan 5 11:51:51 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.3G /var/ 1.6G /var/cache/apt 1.6G /var/cache 1.5G /var/cache/apt/archives 1.4G /var/log/journal/47f40db81a924d0ea15f089479b9a154 Archived and active journals take up 1.3G in the file system. /opt/iobroker/backups: 56M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 304M /opt/iobroker/iobroker-data/ 199M /opt/iobroker/iobroker-data/files 71M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 17M /opt/iobroker/iobroker-data/objects.jsonl 14M /opt/iobroker/iobroker-data/files/iqontrol.meta/userimages/userwidgets/abfallkalender_2023 (1)-cropped (1).html 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.16 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : smarthomepi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : smarthomepi - enabled system.adapter.daswetter.0 : daswetter : smarthomepi - enabled + system.adapter.discovery.0 : discovery : smarthomepi - enabled system.adapter.dwd.0 : dwd : smarthomepi - enabled + system.adapter.influxdb.0 : influxdb : smarthomepi - enabled, port: 8086 + system.adapter.info.0 : info : smarthomepi - enabled + system.adapter.iqontrol.0 : iqontrol : smarthomepi - enabled + system.adapter.javascript.0 : javascript : smarthomepi - enabled + system.adapter.maxcul.0 : maxcul : smarthomepi - enabled + system.adapter.mqtt.0 : mqtt : smarthomepi - enabled, port: 1886, bind: 0.0.0.0 system.adapter.scenes.0 : scenes : smarthomepi - disabled + system.adapter.sonoff.0 : sonoff : smarthomepi - enabled, port: 1883, bind: 192.168.188.159 + system.adapter.tankerkoenig.0 : tankerkoenig : smarthomepi - enabled system.adapter.terminal.0 : terminal : smarthomepi - disabled, port: 8099, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : smarthomepi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthomepi - enabled, port: /dev/ttyUSB1 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : smarthomepi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : smarthomepi - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : smarthomepi - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : smarthomepi - enabled, port: 1883, bind: 192.168.188.159 + system.adapter.web.0 : web : smarthomepi - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthomepi - enabled, port: /dev/ttyUSB1 ioBroker-Repositories stable : http://repo.iobroker.live/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "daswetter" : 3.1.11 , installed 3.1.11 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.16 [Updatable] Adapter "maxcul" : 1.3.1 , installed 1.3.1 Adapter "mqtt" : 5.1.0 , installed 5.1.0 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.9.5 , installed 1.9.5 Objects and States Please stand by - This may take a while Objects: 4729 States: 1691 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 10819 773/sshd: /usr/sbin tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 10711 451/influxd tcp 0 0 192.168.188.159:1883 0.0.0.0:* LISTEN 1001 47485 8303/io.sonoff.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 50214 8330/io.mqtt.0 tcp 0 0 0.0.0.0:1887 0.0.0.0:* LISTEN 1001 50215 8330/io.mqtt.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 46977 8225/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 46970 8225/iobroker.js-co tcp6 0 0 :::8081 :::* LISTEN 1001 46039 8246/io.admin.0 tcp6 0 0 :::8085 :::* LISTEN 1001 50942 9090/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 10821 773/sshd: /usr/sbin tcp6 0 0 :::8086 :::* LISTEN 999 11968 451/influxd udp 0 0 0.0.0.0:42406 0.0.0.0:* 108 11826 402/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13695 765/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11824 402/avahi-daemon: r udp6 0 0 :::546 :::* 0 10763 765/dhcpcd udp6 0 0 :::5353 :::* 108 11825 402/avahi-daemon: r udp6 0 0 :::53005 :::* 108 11827 402/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-01-05 16:26:25.626 - info: host.smarthomepi instance system.adapter.maxcul.0 started with pid 8665 2024-01-05 16:26:28.481 - info: dwd.0 (8427) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-01-05 16:26:28.821 - info: maxcul.0 (8665) starting. Version 1.3.1 in /opt/iobroker/node_modules/iobroker.maxcul, node: v18.19.0, js-controller: 5.0.16 2024-01-05 16:26:29.179 - info: host.smarthomepi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-01-05 16:26:29.351 - info: maxcul.0 (8665) using serial device /dev/ttyUSB0@38400 2024-01-05 16:26:29.392 - info: maxcul.0 (8665) serialPort /dev/ttyUSB0 is open! 2024-01-05 16:26:29.709 - info: host.smarthomepi instance system.adapter.tankerkoenig.0 started with pid 9004 2024-01-05 16:26:31.417 - info: maxcul.0 (8665) CUL FW Version: V 1.67 nanoCUL868 2024-01-05 16:26:32.632 - info: tankerkoenig.0 (9004) starting. Version 3.3.7 in /opt/iobroker/node_modules/iobroker.tankerkoenig, node: v18.19.0, js-controller: 5.0.16 2024-01-05 16:26:32.695 - info: tankerkoenig.0 (9004) Adapter is already in daemon mode 2024-01-05 16:26:32.697 - warn: tankerkoenig.0 (9004) Sync time was too short (5). New sync time is 10 min 2024-01-05 16:26:32.698 - info: tankerkoenig.0 (9004) Sync time set to 10 minutes or 600000 ms 2024-01-05 16:26:33.708 - info: host.smarthomepi instance system.adapter.web.0 started with pid 9090 2024-01-05 16:26:34.180 - warn: zigbee.0 (8318) DeviceAvailability:Failed to ping 0xa4c1384e05b39d11 TS011F 2024-01-05 16:26:38.379 - info: web.0 (9090) starting. Version 6.1.10 in /opt/iobroker/node_modules/iobroker.web, node: v18.19.0, js-controller: 5.0.16 2024-01-05 16:26:38.832 - info: web.0 (9090) socket.io server listening on port 8085 2024-01-05 16:26:38.846 - info: web.0 (9090) http server listening on port 8085 2024-01-05 16:26:39.942 - info: tankerkoenig.0 (9004) Start first request 2024-01-05 16:26:44.375 - info: web.0 (9090) ==> Connected system.user.admin from ::ffff:192.168.188.162 2024-01-05 16:27:38.077 - info: admin.0 (8246) <== Disconnect system.user.admin from ::ffff:192.168.188.21 2024-01-05 16:27:38.085 - info: admin.0 (8246) <== Disconnect system.user.admin from ::ffff:192.168.188.21 admin 2024-01-05 16:27:38.713 - info: admin.0 (8246) ==> Connected system.user.admin from ::ffff:192.168.188.21 2024-01-05 16:27:41.881 - info: admin.0 (8246) ==> Connected system.user.admin from ::ffff:192.168.188.21 2024-01-05 16:27:42.203 - info: zigbee.0 (8318) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"SHK","serialNumber":"868","vendorId":"0403","productId":"6001"},{"path":"/dev/ttyUSB1","manufacturer":"ITead","serialNumber":"78c227e46ed8ed11ad85736162c613ac","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyAMA0"}] 2024-01-05 16:27:46.416 - info: admin.0 (8246) <== Disconnect system.user.admin from ::ffff:192.168.188.21So hier einmal die Langfassung nach nodejs Update.
pi@smarthomepi:~ $ apt policy udev udev: Installiert: 247.3-7+rpi1+deb11u2 Installationskandidat: 247.3-7+rpi1+deb11u2 Versionstabelle: *** 247.3-7+rpi1+deb11u2 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:
Installiert: 247.3-7+rpi1+deb11u2
Das ist das defekte Paket.
Für dein 32Bit-OS gibt es da aber soweit ich weiß auch keinen Patch mehr.Ich würde den Weg einer Neuinstallation von Bookworm 64Bit Lite gehen.
-
@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:
Installiert: 247.3-7+rpi1+deb11u2
Das ist das defekte Paket.
Für dein 32Bit-OS gibt es da aber soweit ich weiß auch keinen Patch mehr.Ich würde den Weg einer Neuinstallation von Bookworm 64Bit Lite gehen.
@thomas-braun sagte in Probleme mit Zigbee Adapter 1.9.5:
Ich würde den Weg einer Neuinstallation von Bookworm 64Bit Lite gehen.
@jens-g
Ja, diesen Weg bin ich kürzlich auch erfolgreich gegangen.Proxmox und HA
-
@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:
Installiert: 247.3-7+rpi1+deb11u2
Das ist das defekte Paket.
Für dein 32Bit-OS gibt es da aber soweit ich weiß auch keinen Patch mehr.Ich würde den Weg einer Neuinstallation von Bookworm 64Bit Lite gehen.
@thomas-braun
Ok bedeutet konkret Micro SD Karte raus und neu beschreiben mit Bookworm Lite oder gibts noch eine Möglichkeit über ssh auf Bookworm 64 bit zu upgraden. Backup ist vorhanden, sowohl von Zigbee als auch Iobroker allgemein -
@thomas-braun
Ok bedeutet konkret Micro SD Karte raus und neu beschreiben mit Bookworm Lite oder gibts noch eine Möglichkeit über ssh auf Bookworm 64 bit zu upgraden. Backup ist vorhanden, sowohl von Zigbee als auch Iobroker allgemein@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:
gibts noch eine Möglichkeit über ssh auf Bookworm 64 bit zu upgraden.
Nein. Neuinstallation.
-
@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:
gibts noch eine Möglichkeit über ssh auf Bookworm 64 bit zu upgraden.
Nein. Neuinstallation.
@thomas-braun
In Ordnung, ist ja zum Glück morgen WE dann werde ich es mal probieren, danach sollte der Stick besser laufen, so ein Mist, das ich die defekte Version erwischt habe :angry: . Also einfach per Skript Iobroker installieren, dann BackitUP Adapter drauf und wiederherstellen. Danach Zigbee und schauen ob es klappt, dann gibts morgen den Zwischenstand.
Danke für eure Tipps, muss ich wohl doch mal auf Bookworm gehen.
PS: Muss ich dann Zigbee neu anlernen oder reicht Backup drauf bzw. wiederherstellen? -
@thomas-braun sagte in Probleme mit Zigbee Adapter 1.9.5:
Ich würde den Weg einer Neuinstallation von Bookworm 64Bit Lite gehen.
@jens-g
Ja, diesen Weg bin ich kürzlich auch erfolgreich gegangen. -
Danke für deine Antwort irgendwelche Tipps noch oder einfach wie gehabt per Skript
@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:
oder einfach wie gehabt per Skript
Ganz rudimentär ohne Schnickschnack. Selbst der Vis-Bug ist mittlerweile behoben.
Proxmox und HA
-
@jens-g sagte in Probleme mit Zigbee Adapter 1.9.5:
oder einfach wie gehabt per Skript
Ganz rudimentär ohne Schnickschnack. Selbst der Vis-Bug ist mittlerweile behoben.
-
Das sind ja gute Aussichten für den Samstag. Dann hoffe ich mal das es bei mir ebenso glatt läuft
So nun ist es geschafft und die Ausgabe von /dev/serial/by-id lautet:
lrwxrwxrwx 1 root root 13 Jan 6 11:20 usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_78c227e46ed8ed11ad85736162c613ac-if00-port0 -> ../../ttyUSB0 lrwxrwxrwx 1 root root 13 Jan 6 11:20 usb-SHK_NANO_CUL_868-if00-port0 -> ../../ttyUSB1habe den Zigbee teil schon direkt so eingetragen: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_78c227e46ed8ed11ad85736162c613ac-if00-port0
Aber trotzdem noch kein Signal überall nur getrennt
siehe Bild
464
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge