Iobroker Oberfläche langsam. Störmeldungen

Dutchman

@tourer4778 sagte in Iobroker Oberfläche langsam. Störmeldungen:

@tourer4778 sagte in Iobroker Oberfläche langsam. Störmeldungen:

2023-12-04 07:23:49.047 - error: esphome.0 (11911) [onStateChange] Error: Not connected

Einen Fehler habe ich gefunden. In einem Script habe ich etwas angesteuert, was gerade nicht erreichbar ist.
Aber woher kommen diese Alias Meldungen?

Diese Meldung kommt von meinem esphome Adapter und sagt nur das sie probierst den Wert von einem Gerät zu steuern was nicht verbunden ist

mcm1957

@tourer4778

Bitte poste doch mal die Ausgabe von 'iob disg* in der Langfassung.
Vielleicht sieht @thomas-braun ein paar kritische Stellen.

Zu Alias:
Gibt es die hier als source definierten States ? Oder gibts Alias definitionen denen ihr Source weggenommen wurde?

Ist es bewußt dass du dasselbe Script in 4 Instanzen des Javascript Aadapters startest?

paul53

@mcm57 sagte: dasselbe Script in 4 Instanzen des Javascript Aadapters startest?

Es wird nicht in 4 Instanzen gestartet. Wenn eine Skript gestoppt wird, erscheint in früheren JS-Versionen im Log "Stop script" in allen Instanzen. In Version 7.5.0 ist es nicht mehr so.

mcm1957

@paul53
Danke - wusste ich nicht.
Dann ist aber zumindest javascript nicht auf Letztstand. Mal sehen ob iob diag was listet,

paul53

@mcm57 sagte: javascript nicht auf Letztstand.

JS 7.5.0 ist noch nicht "stable".

tourer4778

@mcm57 sagte in Iobroker Oberfläche langsam. Störmeldungen:

iob disg

Guten Morgen, Entschuldigung, wenn ich mich so lange nicht gemeldet habe.
Seit dieser Woche, kann ich die Basiseinstellungen im IoBroker nicht mehr öffnen. Er ist ständig in einer Schleife und das Bild baut sich nicht auf. Cach löschen und neuladen beim Firefox hat nicht geholfen. Unten links erschein immer "Time Out" und "Cannot save system configuration: TypeError: e.state.systemConfig is null"

Basiseinstellungen

pi@raspberrypi:~ $ iob disg
iobroker [command]

Commands:
  iobroker setup                                               Setup ioBroker
  iobroker start [all|<adapter>.<instance>|<adapter>]          Starts the js-con                                                                                                                                                             troller or a specified adapter instance or all instances of an adapter
  iobroker stop [<adapter>.<instance>|<adapter>]               stops the js-cont                                                                                                                                                             roller or a specified adapter instance or all instances of an adapter
  iobroker restart [<adapter>.<instance>|<adapter>]            Restarts js-contr                                                                                                                                                             oller or a specified adapter instance or all instances of an adapter  [aliases:                                                                                                                                                              r]
  iobroker debug <adapter>[.<instance>]                        Starts a Node.js                                                                                                                                                              debugging session for the adapter instance
  iobroker info                                                Shows the host in                                                                                                                                                             fo
  iobroker logs [<adapter>]                                    Monitor log
  iobroker add <adapter> [desiredNumber]                       Add instance of a                                                                                                                                                             dapter  [aliases: a]
  iobroker install <adapter>                                   Installs a specif                                                                                                                                                             ied adapter  [aliases: i]
  iobroker rebuild [<module>]                                  Rebuild all nativ                                                                                                                                                             e modules or path
  iobroker url <url> [<name>]                                  Install adapter f                                                                                                                                                             rom specified url, e.g. GitHub
  iobroker del <adapter>                                       Remove adapter an                                                                                                                                                             d all instances from this host  [aliases: delete]
  iobroker del <adapter>.<instance>                            Remove adapter in                                                                                                                                                             stance  [aliases: delete]
  iobroker update [<repositoryUrl>]                            Update repository                                                                                                                                                              and list adapters
  iobroker upgrade                                             Upgrade managemen                                                                                                                                                             t
  iobroker upload [all|<adapter>]                              Upload management                                                                                                                                                               [aliases: u]
  iobroker object                                              Object management                                                                                                                                                               [aliases: o]
  iobroker state                                               State management                                                                                                                                                               [aliases: s]
  iobroker message <adapter>[.instance] <command> [<message>]  Send message to a                                                                                                                                                             dapter instance/s
  iobroker list <type> [<filter>]                              List all entries,                                                                                                                                                              like objects
  iobroker chmod <mode> <file>                                 Change file right                                                                                                                                                             s
  iobroker chown <user> <group> <file>                         Change file owner                                                                                                                                                             ship
  iobroker touch <file>                                        Touch file
  iobroker rm <file>                                           Remove file
  iobroker file                                                File management
  iobroker user                                                User commands
  iobroker group                                               group management
  iobroker host <hostname>                                     Set host to given                                                                                                                                                              hostname
  iobroker set <adapter>.<instance>                            Change settings o                                                                                                                                                             f adapter config
  iobroker license <license.file or license.text>              Update license by                                                                                                                                                              given file
  iobroker cert                                                Certificate manag                                                                                                                                                             ement
  iobroker clean <yes>                                         Clears all object                                                                                                                                                             s and states
  iobroker backup                                              Create backup
  iobroker restore <backup name or path>                       Restore a specifi                                                                                                                                                             ed backup
  iobroker validate <backup name or path>                      Validate a specif                                                                                                                                                             ied backup
  iobroker status [all|<adapter>.<instance>]                   Status of ioBroke                                                                                                                                                             r or adapter instance  [aliases: isrun]
  iobroker repo [<name>]                                       Show repo informa                                                                                                                                                             tion
  iobroker uuid                                                Show uuid of the                                                                                                                                                              installation  [aliases: id]
  iobroker unsetup                                             Reset license, in                                                                                                                                                             stallation secret and language
  iobroker fix                                                 Execute the insta                                                                                                                                                             llation fixer script, this updates your ioBroker installation
  iobroker nodejs-update [<major-version>]                     Upgrade the Node.                                                                                                                                                             JS installation to the current LTS
  iobroker multihost                                           Multihost managem                                                                                                                                                             ent
  iobroker compact                                             compact group man                                                                                                                                                             agement
  iobroker plugin                                              Plugin management
  iobroker vendor <passphrase> [<vendor.json>]                 Update the vendor                                                                                                                                                              information using given passphrase
  iobroker version [<adapter>]                                 Show version of j                                                                                                                                                             s-controller or specified adapter  [aliases: v]

Options:
  --help  Show help  [boolean]
pi@raspberrypi:~ $

TT-Tom

@tourer4778

Der Befehl lautet iob diag, war ein Tippfehler. Bitte nochmal probieren und Ausgabe posten.

tourer4778

@tt-tom

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : armhf

Systemuptime and Load:
 08:02:46 up  1:37,  3 users,  load average: 1.78, 2.35, 2.34
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sun 2023-12-24 08:02:46 CET
           Universal time: Sun 2023-12-24 07:02:46 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       true
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        2.1G        1.2G         35M        4.5G        5.5G
Swap:            99M          0B         99M
Total:          7.9G        2.1G        1.3G

         7811 M total memory
         2123 M used memory
         4157 M active memory
         2150 M inactive memory
         1153 M free memory
          158 M buffer memory
         4376 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      459G   19G  422G   5% /
devtmpfs       devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  936K  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      253M   51M  202M  20% /boot
tmpfs          tmpfs     782M   24K  782M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Dec 24 06:25:29 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:DB:2E:50 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=6b8e45ad-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Sun Dec 24 06:25:32 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Sun Dec 24 06:25:32 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Sun Dec 24 06:25:35 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
2.3G    /var/
2.0G    /var/log
1.9G    /var/log/journal/3e23e34d17484a28b9473f69f7d9d21c
1.9G    /var/log/journal
151M    /var/cache

Archived and active journals take up 1.8G in the file system.

/opt/iobroker/backups:
5.0G    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
2.2G    /opt/iobroker/iobroker-data/
1.3G    /opt/iobroker/iobroker-data/esphome.0/.esphome/build
1.3G    /opt/iobroker/iobroker-data/esphome.0/.esphome
1.3G    /opt/iobroker/iobroker-data/esphome.0
366M    /opt/iobroker/iobroker-data/history

The five largest files in iobroker-data are:
34M     /opt/iobroker/iobroker-data/objects.jsonl
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
24M     /opt/iobroker/iobroker-data/esphome.0/.esphome/build/heizstab/.pioenvs/heizstab/libFrameworkArduino.a
24M     /opt/iobroker/iobroker-data/esphome.0/.esphome/build/heizstab-148/.pioenvs/heizstab-148/libFrameworkArduino.a
24M     /opt/iobroker/iobroker-data/esphome.0/.esphome/build/heizstab-147/.pioenvs/heizstab-147/libFrameworkArduino.a

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
 *** 18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.17
admin:          6.12.0
javascript:     7.1.6

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
  system.adapter.alias-manager.0          : alias-manager         : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.email.0                  : email                 : raspberrypi                              -  enabled
+ system.adapter.esphome.0                : esphome               : raspberrypi                              -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypi                              - disabled
  system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              - disabled
+ system.adapter.heizoel.0                : heizoel               : raspberrypi                              -  enabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
  system.adapter.ical.1                   : ical                  : raspberrypi                              -  enabled
  system.adapter.ical.2                   : ical                  : raspberrypi                              -  enabled
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.javascript.1             : javascript            : raspberrypi                              -  enabled
+ system.adapter.javascript.2             : javascript            : raspberrypi                              -  enabled
+ system.adapter.logparser.0              : logparser             : raspberrypi                              -  enabled
  system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              - disabled, port: 1884, bind: 0.0.0.0
+ system.adapter.opendtu.0                : opendtu               : raspberrypi                              -  enabled
+ system.adapter.operating-hours.0        : operating-hours       : raspberrypi                              -  enabled
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
+ system.adapter.s7.0                     : s7                    : raspberrypi                              -  enabled
+ system.adapter.scenes.0                 : scenes                : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.smartthings.0            : smartthings           : raspberrypi                              -  enabled
+ system.adapter.snmp.0                   : snmp                  : raspberrypi                              -  enabled
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sourceanalytix.0         : sourceanalytix        : raspberrypi                              -  enabled
+ system.adapter.synology.0               : synology              : raspberrypi                              -  enabled, port: 5000
+ system.adapter.tankerkoenig.0           : tankerkoenig          : raspberrypi                              -  enabled
+ system.adapter.tankerkoenig.1           : tankerkoenig          : raspberrypi                              -  enabled
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.time-switch.0            : time-switch           : raspberrypi                              -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : raspberrypi                              -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : raspberrypi                              -  enabled
  system.adapter.vis-history.0            : vis-history           : raspberrypi                              - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspberrypi                              - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : raspberrypi                              - disabled
  system.adapter.vis-material-webfont.0   : vis-material-webfont  : raspberrypi                              -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : raspberrypi                              -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              - disabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
+ system.adapter.vw-connect.0             : vw-connect            : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.wled.0                   : wled                  : raspberrypi                              -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.synology.0               : synology              : raspberrypi                              -  enabled, port: 5000
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

Installed ioBroker-Instances
Used repository: beta
Adapter    "admin"        : 6.13.5   , installed 6.12.0 [Updatable]
Adapter    "alexa2"       : 3.26.3   , installed 3.26.3
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "backitup"     : 2.9.8    , installed 2.8.7  [Updatable]
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "email"        : 1.2.1    , installed 1.2.0  [Updatable]
Adapter    "esphome"      : 0.5.0-beta.8, installed 0.2.4 [Updatable]
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fullybrowser" : 3.0.9    , installed 3.0.6  [Updatable]
Adapter    "heizoel"      : 1.0.3    , installed 1.0.3
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "ical"         : 1.13.5   , installed 1.13.3 [Updatable]
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "iot"          : 2.0.11   , installed 2.0.11
Adapter    "javascript"   : 7.5.1    , installed 7.1.6  [Updatable]
Controller "js-controller": 5.0.17   , installed 5.0.17
Adapter    "logparser"    : 2.2.1    , installed 2.2.0  [Updatable]
Adapter    "mqtt"         : 5.1.0    , installed 5.1.0
Adapter    "opendtu"      : 1.0.1    , installed 1.0.1
Adapter    "operating-hours": 1.0.6  , installed 1.0.6
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "s7"           : 1.4.2    , installed 1.3.15 [Updatable]
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "shelly"       : 6.7.0    , installed 6.6.1  [Updatable]
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartthings"  : 0.1.1    , installed 0.0.4  [Updatable]
Adapter    "snmp"         : 3.1.0    , installed 3.1.0
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "sourceanalytix": 0.4.14  , installed 0.4.12 [Updatable]
Adapter    "synology"     : 3.0.1    , installed 3.0.1
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 3.0.1    , installed 3.0.0  [Updatable]
Adapter    "time-switch"  : 2.2.2    , installed 2.2.2
Adapter    "trashschedule": 3.1.2    , installed 2.3.0  [Updatable]
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage" : 2.1.0    , installed 2.0.2  [Updatable]
Adapter    "vis-material-webfont": 0.0.3, installed 0.0.3
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vw-connect"   : 0.5.1    , installed 0.5.1
Adapter    "web"          : 6.2.3    , installed 6.1.10 [Updatable]
Adapter    "welcome"      : 0.3.0    , installed 0.1.0  [Updatable]
Adapter    "wled"         : 0.7.2    , installed 0.7.1  [Updatable]
Adapter    "ws"           : 2.5.10   , installed 2.5.8  [Updatable]

Objects and States
Please stand by - This may take a while
Objects:        14551
States:         12801

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 12

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       67953      6980/iobroker.js-co
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       67548      6980/iobroker.js-co
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          15814      500/cupsd
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       69486      7339/io.shelly.0
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       70930      7232/io.sonoff.0
tcp        0      0 0.0.0.0:6052            0.0.0.0:*               LISTEN      1001       71801      7577/python3
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12285      560/sshd: /usr/sbin
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          15813      500/cupsd
tcp6       0      0 :::22                   :::*                    LISTEN      0          16391      560/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       67976      7011/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       74776      7727/io.web.0
udp        0      0 0.0.0.0:52670           0.0.0.0:*                           1001       73237      7954/io.snmp.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          15073      476/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          16516      598/cups-browsed
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       71678      7748/io.wled.0
udp        0      0 192.168.178.142:5353    0.0.0.0:*                           1001       71810      7577/python3
udp        0      0 127.0.0.1:5353          0.0.0.0:*                           1001       71809      7577/python3
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       71804      7577/python3
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       71762      7438/io.esphome.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12757      394/avahi-daemon: r
udp        0      0 0.0.0.0:51252           0.0.0.0:*                           108        12759      394/avahi-daemon: r
udp6       0      0 :::36109                :::*                                108        12760      394/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          15182      476/dhcpcd
udp6       0      0 :::5353                 :::*                                108        12758      394/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-12-24 07:55:50.611  - info: javascript.0 (7073) script.js.IoBroker.Aktive_Ausgänge: ['{\'name\':\'Umwelzpumpe Heizkreislauf AnAus\'}','{\'name\':\'Außensteckdose Straße EinAus\'}']
2023-12-24 07:57:56.322  - info: heizoel.0 (7499) State value to set for "heizoel.0.2000.data01.dealer.rating.averageRatingLastYear" has to be type "string" but received type "number"
2023-12-24 07:57:56.330  - info: heizoel.0 (7499) State value to set for "heizoel.0.2000.data02.dealer.rating.averageRating" has to be type "number" but received type "string"
2023-12-24 07:57:56.332  - info: heizoel.0 (7499) State value to set for "heizoel.0.2000.data02.dealer.rating.averageRatingLastYear" has to be type "number" but received type "string"
2023-12-24 07:57:57.125  - info: heizoel.0 (7499) State value to set for "heizoel.0.3000.data01.dealer.rating.averageRating" has to be type "number" but received type "string"
2023-12-24 07:57:57.130  - info: heizoel.0 (7499) State value to set for "heizoel.0.3000.data02.pricing.bestPriceDiff" has to be type "number" but received type "string"
2023-12-24 07:57:57.151  - info: heizoel.0 (7499) State value to set for "heizoel.0.3000.data03.pricing.bestPriceDiff" has to be type "number" but received type "string"
2023-12-24 08:00:00.059  - info: javascript.0 (7073) script.js.IoBroker.Astro_Zeiten: Astro: Gültige Zeiten: [aktueller Tag: 10] | [nächster Tag: 4] | [Aktualisiert: 0] | Aktuelle Tageszeit: Morgendämmerung | Kommende Tageszeit: Sonnenaufgang
2023-12-24 08:00:00.243  - info: host.raspberrypi instance system.adapter.ical.2 started with pid 18919
2023-12-24 08:00:01.106  - info: javascript.0 (7073) script.js.IoBroker.Aktive_Ausgänge: ['{\'name\':\'Umwelzpumpe Heizkreislauf AnAus\'}','{\'name\':\'Außensteckdose Straße EinAus\'}']
2023-12-24 08:00:01.107  - info: javascript.0 (7073) script.js.IoBroker.Aktive_Meldungen: ['{\'name\':\'ESP Smartshunt Keine Verbindung\'}','{\'name\':\'ESP MPPT Keine Verbindung\'}','{\'name\':\'ESP_Batterie keine Verbindung\'}','{\'name\':\'ET200SP Gartenhaus Störung\'}','{\'name\':\'ESP Display Keine Verbindung\'}','{\'name\':\'ESP Display Keine Verbindung\'}','{\'name\':\'ESP WLED GH keine Verbindung\'}','{\'name\':\'ESP GHWC kein Verbindung\'}','{\'name\':\'Alexa Tobi keine Verbindung\'}','{\'name\':\'Störung3 Heizstab hat keine Leistung\'}']
2023-12-24 08:00:02.205  - info: javascript.0 (7073) script.js.IoBroker.Aktive_Ausgänge: ['{\'name\':\'Umwelzpumpe Heizkreislauf AnAus\'}','{\'name\':\'Außensteckdose Straße EinAus\'}']
2023-12-24 08:00:02.206  - info: javascript.0 (7073) script.js.IoBroker.Aktive_Meldungen: ['{\'name\':\'ESP Smartshunt Keine Verbindung\'}','{\'name\':\'ESP MPPT Keine Verbindung\'}','{\'name\':\'ESP_Batterie keine Verbindung\'}','{\'name\':\'ET200SP Gartenhaus Störung\'}','{\'name\':\'ESP Display Keine Verbindung\'}','{\'name\':\'ESP Display Keine Verbindung\'}','{\'name\':\'ESP WLED GH keine Verbindung\'}','{\'name\':\'ESP GHWC kein Verbindung\'}','{\'name\':\'Alexa Tobi keine Verbindung\'}','{\'name\':\'Störung3 Heizstab hat keine Leistung\'}']
2023-12-24 08:00:04.283  - info: host.raspberrypi instance system.adapter.ical.1 started with pid 18936
2023-12-24 08:00:06.161  - info: ical.2 (18919) starting. Version 1.13.3 in /opt/iobroker/node_modules/iobroker.ical, node: v18.19.0, js-controller: 5.0.17
2023-12-24 08:00:06.777  - warn: trashschedule.0 (7792) (5) nextAfter has no entries. Check configuration of ical (increase preview) and trashschedule!
2023-12-24 08:00:07.460  - info: ical.2 (18919) processing URL: Geburtstage https://calendar.google.com/calendar/ical/ca71d79fa6dfafec51b6cdcad9b68860f246a5d698139d735d1e234c34b4aa9f%40group.calendar.google.com/private-6c3abd24a81c173d80389123ef459bda/basic.ics
2023-12-24 08:00:09.260  - info: ical.2 (18919) processing URL: Termine https://calendar.google.com/calendar/ical/tobiasbangert78%40gmail.com/private-af20b004c69d83ed1022fdbbd00428fd/basic.ics
2023-12-24 08:00:11.594  - info: ical.1 (18936) starting. Version 1.13.3 in /opt/iobroker/node_modules/iobroker.ical, node: v18.19.0, js-controller: 5.0.17
2023-12-24 08:00:12.520  - info: ical.1 (18936) processing URL: Müll Kalender https://calendar.google.com/calendar/ical/19c4e1646ead3d18594fe439767c040fbf2e1f7c910b7c8b7a60247a416747e7%40group.calendar.google.com/private-88175afa823e06bf5e818e919d73f0f9/basic.ics
2023-12-24 08:00:12.741  - warn: trashschedule.0 (7792) (5) nextAfter has no entries. Check configuration of ical (increase preview) and trashschedule!
2023-12-24 08:00:16.721  - info: ical.2 (18919) Terminated (NO_ERROR): Without reason
2023-12-24 08:00:17.263  - info: host.raspberrypi instance system.adapter.ical.2 terminated with code 0 (NO_ERROR)
2023-12-24 08:00:17.657  - info: ical.1 (18936) Terminated (NO_ERROR): Without reason
2023-12-24 08:00:18.214  - info: host.raspberrypi instance system.adapter.ical.1 terminated with code 0 (NO_ERROR)

============ Mark until here for C&P =============

crunchip

@tourer4778 schon auf die Idee gekommen, vllt mal sämtliche Updates auszuführen?
vor allem als beta User

@tourer4778 sagte in Iobroker Oberfläche langsam. Störmeldungen:

X-Server: true

ausschalten

tourer4778

@crunchip
Die Updates werden nur angezeigt, weil "Latest" ausgewählt ist. Aber ich kann es ja nicht mehr ändern, weil ich nicht in die Einstellungen komme. Latest wegen vw-connect, den ich aktualisieren habe.

X-Server, wo kann ich das einstellen ?

crunchip

@tourer4778 https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten?_=1703405292873&lang=de

tourer4778

@crunchip
Okay, Stabil konnte ich einstellen.
Wo kann ich das mit dem X-Server einstellen?

TT-Tom

@tourer4778

Steht auch in dem Link von @crunchip

tourer4778

@tt-tom
Tut mir leid, auf dem link finde ich nichts in verbindung mit X-Server, wo nach muss ich dort suchen ?

Homoran

@tourer4778

crunchip

@tourer4778 ab RunLevel 5 / graphische Oberfläche(nennt sich x-server)

tourer4778

@crunchip
Aber bei steht er auf 3, was ja laut dem schreiben okay ist.

Homoran

@tourer4778
Hast du trotzdem ein full Raspbian mit Desktop installiert, statt der lite Version?

tourer4778

@homoran
Das kann sein, ich weiß es nicht mehr genau.
Schluckt das so viel mehr Leistung?

Thomas Braun

@tourer4778

sudo apt update
sudo apt full-upgrade 
sudo systemctl set-default multi-user target
sudo reboot

Dann nochmal

iob diag

NEWS

Iobroker Oberfläche langsam. Störmeldungen

Support us

870
Online

31.9k
Users

80.1k
Topics

1.3m
Posts

NEWS

Iobroker Oberfläche langsam. Störmeldungen

Support us

870Online

31.9kUsers

80.1kTopics

1.3mPosts

870
Online

31.9k
Users

80.1k
Topics

1.3m
Posts