Backup wiederherstellen

André Koschnik

postgresql.conf

pg_hba.conf

status postgres

André Koschnik

@thomas-braun said in Backup wiederherstellen:

iob diag


======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: iobroker
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi6-rpi-v8
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 12:30:07 up 22:12,  5 users,  load average: 0.90, 0.89, 0.75
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Thu 2023-11-09 12:30:07 CET
           Universal time: Thu 2023-11-09 11:30:07 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        2.3G        507M         23M        1.3G        1.7G
Swap:           104M        5.5M         99M
Total:          4.1G        2.3G        606M

         3792 M total memory
         2192 M used memory
         2221 M active memory
          829 M inactive memory
          483 M free memory
           26 M buffer memory
         1187 M swap cache
           99 M total swap
            5 M used swap
           94 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT                       LOAD   ACTIVE SUB    DESCRIPTION
* postgresql@13-main.service loaded failed failed PostgreSQL Cluster 13-main

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

*** FILESYSTEM ***
Filesystem                              Type      Size  Used Avail Use% Mounted on
udev                                    devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs                                   tmpfs     380M  1.4M  378M   1% /run
/dev/sda2                               ext4      235G  7.7G  215G   4% /
tmpfs                                   tmpfs     1.9G  4.3M  1.9G   1% /dev/shm
tmpfs                                   tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/sda1                               vfat      510M   73M  438M  15% /boot/firmware
tmpfs                                   tmpfs     380M   36K  380M   1% /run/user/1000
//192.168.100.2/share/ioBrokerbackupDir cifs      5.4T  2.3T  3.2T  42% /opt/iobroker/backups

Messages concerning ext4 filesystem in dmesg:
[Wed Nov  8 14:17:42 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:54:39:F9 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=20713d2e-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Wed Nov  8 14:17:46 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Nov  8 14:17:48 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET                              SOURCE                                  FSTYPE      OPTIONS
/                                   /dev/sda2                               ext4        rw,noatime
|-/run/user/1000/doc                portal                                  fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000
|-/boot/firmware                    /dev/sda1                               vfat        rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
`-/opt/iobroker/backups             //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=3.1.1,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
  `-/opt/iobroker/backups           //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=1.0,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
    `-/opt/iobroker/backups         //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=3.1.1,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
      `-/opt/iobroker/backups       //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=1.0,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
        `-/opt/iobroker/backups     //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=3.1.1,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
          `-/opt/iobroker/backups   //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=1.0,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
            `-/opt/iobroker/backups //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=3.1.1,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1

Files in neuralgic directories:

/var:
890M    /var/
463M    /var/cache
454M    /var/cache/apt
340M    /var/cache/apt/archives
248M    /var/lib

Archived and active journals take up 48.0M in the file system.

/opt/iobroker/backups:
11G     /opt/iobroker/backups/
9.2G    /opt/iobroker/backups/1/iobroker/iobroker-tar-backup-20230129-122153
9.2G    /opt/iobroker/backups/1/iobroker
9.2G    /opt/iobroker/backups/1
84M     /opt/iobroker/backups/iobroker_2023_03_06-02_40_21_backupiobroker.tar

/opt/iobroker/iobroker-data:
255M    /opt/iobroker/iobroker-data/
171M    /opt/iobroker/iobroker-data/files
52M     /opt/iobroker/iobroker-data/files/javascript.admin
45M     /opt/iobroker/iobroker-data/files/devices.admin/static
45M     /opt/iobroker/iobroker-data/files/devices.admin

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
27M     /opt/iobroker/iobroker-data/objects.jsonl
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.eafddf6f.js.map
8.6M    /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js
8.3M    /opt/iobroker/iobroker-data/files/web.admin/static/js/main.eafddf6f.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_36651404c719ec11b22276e5f01c6278-if00-port0
/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0037-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.5.1
/usr/bin/node           v20.5.1
/usr/bin/npm            9.8.0
/usr/bin/npx            9.8.0
/usr/bin/corepack       0.19.0


nodejs:
  Installed: 20.5.1-deb-1nodesource1
  Candidate: 20.5.1-deb-1nodesource1
  Version table:
 *** 20.5.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_20.x bookworm/main arm64 Packages
        100 /var/lib/dpkg/status
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:
npm ERR! code ELSPROBLEMS
npm ERR! missing: moment-parseformat@^4.0.0, required by iobroker.javascript@7.1.4

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-11-09T11_30_15_066Z-debug-0.log

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.12
admin:          6.12.0
javascript:     7.1.4

Adapters from github:   1

Adapter State
+ system.adapter.accuweather.0            : accuweather           : iobroker                                 -  enabled
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker                                 -  enabled
+ system.adapter.alexa2.1                 : alexa2                : iobroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
  system.adapter.devices.0                : devices               : iobroker                                 - disabled
  system.adapter.discovery.0              : discovery             : iobroker                                 - disabled
  system.adapter.fb-checkpresence.0       : fb-checkpresence      : iobroker                                 - disabled
+ system.adapter.go-e.0                   : go-e                  : iobroker                                 -  enabled
+ system.adapter.hue-extended.0           : hue-extended          : iobroker                                 -  enabled
  system.adapter.ical.1                   : ical                  : iobroker                                 -  enabled
+ system.adapter.info.0                   : info                  : iobroker                                 -  enabled
  system.adapter.javascript.0             : javascript            : iobroker                                 - disabled
+ system.adapter.lovelace.0               : lovelace              : iobroker                                 -  enabled, port: 8091, bind: 0.0.0.0, run as: admin
+ system.adapter.meater.0                 : meater                : iobroker                                 -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : iobroker                                 -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.parser.0                 : parser                : iobroker                                 -  enabled
+ system.adapter.pi-hole.0                : pi-hole               : iobroker                                 -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : iobroker                                 -  enabled
+ system.adapter.samsung.0                : samsung               : iobroker                                 -  enabled
+ system.adapter.smartmeter.0             : smartmeter            : iobroker                                 -  enabled
  system.adapter.sql.0                    : sql                   : iobroker                                 - disabled, port: 5432
+ system.adapter.terminal.0               : terminal              : iobroker                                 -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.trashschedule.1          : trashschedule         : iobroker                                 -  enabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
  system.adapter.web.0                    : web                   : iobroker                                 - disabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : iobroker                                 -  enabled
+ system.adapter.worx.0                   : worx                  : iobroker                                 -  enabled
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.lovelace.0               : lovelace              : iobroker                                 -  enabled, port: 8091, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : iobroker                                 -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.terminal.0               : terminal              : iobroker                                 -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "accuweather"  : 1.3.1    , installed 1.3.1
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "alexa2"       : 3.25.2   , installed 3.25.2
Adapter    "backitup"     : 2.8.7    , installed 2.8.7
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter    "go-e"         : 1.0.27   , installed 1.0.28
Adapter    "hue-extended" : 2.0.0    , installed 2.0.0
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.12   , installed 5.0.12
Adapter    "lovelace"     : 3.0.1    , installed 3.0.1
Adapter    "meater"       : 1.0.2    , installed 1.0.2
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "node-red"     : 4.0.3    , installed 4.0.3
Adapter    "parser"       : 1.3.2    , installed 1.3.2
Adapter    "pi-hole"      : 1.3.6    , installed 1.3.6
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "samsung"      : 0.5.11   , installed 0.5.11
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.3.4    , installed 3.3.4
Adapter    "socketio"     : 6.5.5    , installed 6.5.7
Adapter    "sql"          : 2.2.0    , installed 2.2.0
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "trashschedule": 2.3.0    , installed 2.3.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "web"          : 6.1.4    , installed 6.1.4
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "worx"         : 2.3.4    , installed 2.3.4
Adapter    "ws"           : 2.5.5    , installed 2.5.7
Adapter    "zigbee"       : 1.8.23   , installed 1.8.23

Objects and States
Please stand by - This may take a while
Objects:        12144
States:         9183

*** OS-Repositories and Updates ***
W: https://packages.grafana.com/oss/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://packages.grafana.com/oss/deb stable InRelease
Hit:6 https://deb.nodesource.com/node_20.x bookworm InRelease
Hit:7 https://apt.postgresql.org/pub/repos/apt bookworm-pgdg InRelease
Reading package lists...
W: https://packages.grafana.com/oss/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:3
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name  
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          1938       819/sshd: /usr/sbin
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      999        19800      1452/pihole-FTL   
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      0          19860      1470/lighttpd     
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       19044      789/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       14231      789/iobroker.js-con
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          356850     63306/cupsd       
tcp        0      0 127.0.0.1:4711          0.0.0.0:*               LISTEN      999        19806      1452/pihole-FTL   
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       21150      2537/io.mqtt.0    
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      1001       609835     106360/node-red   
tcp6       0      0 :::22                   :::*                    LISTEN      0          1940       819/sshd: /usr/sbin
tcp6       0      0 :::53                   :::*                    LISTEN      999        19802      1452/pihole-FTL   
tcp6       0      0 :::80                   :::*                    LISTEN      0          19859      1470/lighttpd     
tcp6       0      0 ::1:4711                :::*                    LISTEN      999        19807      1452/pihole-FTL   
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          356849     63306/cupsd       
tcp6       0      0 :::3000                 :::*                    LISTEN      112        133357     24886/grafana     
tcp6       0      0 :::8091                 :::*                    LISTEN      1001       25648      2944/io.lovelace.0
tcp6       0      0 :::8090                 :::*                    LISTEN      1001       631380     106360/node-red   
tcp6       0      0 :::8088                 :::*                    LISTEN      1001       25985      3106/io.terminal.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       215821     39107/io.admin.0  
tcp6       0      0 :::2011                 :::*                    LISTEN      1001       629991     106360/node-red   
tcp6       0      0 :::2010                 :::*                    LISTEN      1001       629973     106360/node-red   
tcp6       0      0 :::2009                 :::*                    LISTEN      1001       629975     106360/node-red   
tcp6       0      0 :::2008                 :::*                    LISTEN      1001       629977     106360/node-red   
tcp6       0      0 :::2007                 :::*                    LISTEN      1001       629989     106360/node-red   
tcp6       0      0 :::2006                 :::*                    LISTEN      1001       629987     106360/node-red   
tcp6       0      0 :::2005                 :::*                    LISTEN      1001       629985     106360/node-red   
tcp6       0      0 :::2004                 :::*                    LISTEN      1001       629983     106360/node-red   
tcp6       0      0 :::2003                 :::*                    LISTEN      1001       629979     106360/node-red   
tcp6       0      0 :::2002                 :::*                    LISTEN      1001       631382     106360/node-red   
tcp6       0      0 :::2001                 :::*                    LISTEN      1001       631384     106360/node-red   
tcp6       0      0 :::2000                 :::*                    LISTEN      1001       629981     106360/node-red   
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          356185     63324/cups-browsed
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        13697      603/avahi-daemon: r
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       629993     106360/node-red   
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       629992     106360/node-red   
udp        0      0 0.0.0.0:53              0.0.0.0:*                           999        19799      1452/pihole-FTL   
udp        0      0 0.0.0.0:55396           0.0.0.0:*                           104        13699      603/avahi-daemon: r
udp6       0      0 fe80::f4dc:1a48:40a:546 :::*                                0          17893      756/NetworkManager
udp6       0      0 :::47665                :::*                                104        13700      603/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                104        13698      603/avahi-daemon: r
udp6       0      0 :::53                   :::*                                999        19801      1452/pihole-FTL   

*** Log File - Last 25 Lines ***

2023-11-09 12:12:45.260  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:14:02.441  - info: smartmeter.0 (2697) Received 351 values, 1 updated
2023-11-09 12:15:19.701  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:16:37.058  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:17:54.089  - info: smartmeter.0 (2697) Received 351 values, 4 updated
2023-11-09 12:19:11.274  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:20:28.407  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:21:45.645  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:22:03.305  - info: admin.0 (39107) ==> Connected system.user.admin from ::ffff:192.168.100.241
2023-11-09 12:22:26.668  - info: admin.0 (39107) ==> Connected system.user.admin from ::ffff:192.168.100.241
2023-11-09 12:22:28.653  - info: admin.0 (39107) ==> Connected system.user.admin from ::ffff:192.168.100.241
2023-11-09 12:22:28.994  - info: zigbee.0 (2757) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"ITead","serialNumber":"36651404c719ec11b22276e5f01c6278","pnpId":"usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_36651404c719ec11b22276e5f01c6278-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyUSB1","manufacturer":"Silicon Labs","serialNumber":"0037","pnpId":"usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0037-if00-port0","vendorId":"10c4","productId":"ea60"}]
2023-11-09 12:23:02.860  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:23:28.510  - error: zigbee.0 (2757) Send command to 0xa4c138ab4e1a5a57 failed with no error code (undefined)
2023-11-09 12:23:49.390  - error: zigbee.0 (2757) Send command to 0xa4c138aadf131aa8 failed with no error code (undefined)
2023-11-09 12:23:52.068  - error: zigbee.0 (2757) Send command to 0xa4c138aadf131aa8 failed with no error code (undefined)
2023-11-09 12:23:55.604  - error: zigbee.0 (2757) Send command to 0xa4c138ab4e1a5a57 failed with no error code (undefined)
2023-11-09 12:24:20.139  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:24:59.312  - info: admin.0 (39107) <== Disconnect system.user.admin from ::ffff:192.168.100.241
2023-11-09 12:25:00.815  - info: admin.0 (39107) ==> Connected system.user.admin from ::ffff:192.168.100.241
2023-11-09 12:25:37.319  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:26:54.526  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:28:11.561  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:29:28.694  - info: smartmeter.0 (2697) Received 351 values, 2 updated
2023-11-09 12:30:45.784  - info: smartmeter.0 (2697) Received 351 values, 2 updated

============ Mark until here for C&P =============

iob diag has finished.

Codierknecht

@andré-koschnik

Deine Versionen von Node und NPM passen nicht zusammen
Node 20 ist nicht die empfohlene Version
4 GB RAM sind reichlich knapp
Das Backup braucht jede Menge RAM
Kleinigkeit: graphical.target .... Reste eines Desktop?
Das sollte multi-user.target sein

André Koschnik

@codierknecht said in Backup wiederherstellen:

Node 20 ist nicht die empfohlene Version

gibt es eine einfache möglichkeit auf die empfolen version zu gehen ohne das ich mir bei der hilfe von googel wieder alles zerschieße?

@codierknecht said in Backup wiederherstellen:

Kleinigkeit: graphical.target .... Reste eines Desktop?
Das sollte multi-user.target sein

sorry was meinst du? ist das das falsche OS für den iob auf dem rasbi.

Thomas Braun

@andré-koschnik sagte in Backup wiederherstellen:

Installier nodejs@18

iob stop
iob fix
iob nodejs-update

Und was veranstaltest du mit der Freigabe bitte?

`-/opt/iobroker/backups             //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=3.1.1,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1

  `-/opt/iobroker/backups           //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=1.0,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1

    `-/opt/iobroker/backups         //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=3.1.1,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1

      `-/opt/iobroker/backups       //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=1.0,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1

        `-/opt/iobroker/backups     //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=3.1.1,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1

          `-/opt/iobroker/backups   //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=1.0,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,soft,unix,posixpaths,serverino,mapposix,acl,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1

            `-/opt/iobroker/backups //192.168.100.2/share/ioBrokerbackupDir cifs        rw,relatime,vers=3.1.1,cache=strict,username=iobroker,domain=leevan.de,uid=1001,noforceuid,gid=1001,noforcegid,addr=192.168.100.2,file_mode=0777,dir_mode=0777,soft,nounix,serverino,mapposix,rsize=4194304,wsize=4194304,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1

Siebenmal übereinander gestapelt? Macht gar keinen Sinn, bzw. ist falsch.

André Koschnik

@thomas-braun

das ist mein share zu meinem NAS für das iobroker backup

Codierknecht

@andré-koschnik sagte in Backup wiederherstellen:

ohne das ich mir bei der hilfe von googel wieder alles zerschieße?

Was Du bei Tante Gurgel so alles findest, ist meisten veraltet und/oder falsch.
Schau in die Signatur von @Thomas-Braun

sorry was meinst du? ist das das falsche OS für den iob auf dem rasbi.

Nein. Musst Du nur umstellen.

sudo systemctl set-default multi-user.target

Thomas Braun

@andré-koschnik sagte in Backup wiederherstellen:

das ist mein share zu meinem NAS für das iobroker backup

Aber das hängt man nicht 7x übereinander.

André Koschnik

@thomas-braun

keine ahnung wo das 7 mal herkommt

Thomas Braun

@andré-koschnik sagte in Backup wiederherstellen:

keine ahnung wo das 7 mal herkommt

Ich auch nicht.
Vor allen dingen mit unterschiedlichen mount-Optionen. Hast du das in der fstab eingetragen?

cat /etc/fstab

André Koschnik

@thomas-braun said in Backup wiederherstellen:

cat /etc/fstab

den befehl kenne ich nicht

Homoran

@andré-koschnik keinen abgeschnittenen Screenshot, sondern Text in code-tags!

@andré-koschnik sagte in Backup wiederherstellen:

den befehl kenne ich nicht

klappt aber

André Koschnik

@thomas-braun
node.js ist gefixed

Thomas Braun

@andré-koschnik

Dann mountest du das von Hand?
Und/oder mit dem Backitup-Adapter? Wobei ich das von dem noch nie gesehen habe, der mountet und umountet nämlich vorher und nachher.

André Koschnik

@thomas-braun said in Backup wiederherstellen:

Dann mountest du das von Hand?

nein

aber der backup adapter, ist beim backup wiederherstellen ein paar abgebrochen. Evlt. deshalb die mehrfachen mounts.
die sind aber nach einem neustart wieder weg oder?

Homoran

@andré-koschnik sagte in Backup wiederherstellen:

Evlt. deshalb die mehrfachen mounts.

nein!
wenn da bereits ein mount existiert gibt's ne Fehlermeldung und nichts passiert.
Auf keinen Fall wird "drübergemountet"

wieso gibt es keinen port der auf 5432 hört?
ich komme mit dem PG admin von anderen rechner an die db

was ist das denn jetzt wieder?

Thomas Braun

@andré-koschnik sagte in Backup wiederherstellen:

die sind aber nach einem neustart wieder weg oder?

Sollte...
Oder

sudo umount /opt/iobroker/backups

André Koschnik

@homoran

OK muss ich das beheben?wenn ja wie?

und

wieso gibt es keinen port der auf 5432 hört?
ich komme mit dem PG admin von anderen rechnern an die db

und kann ich das backfile der postgres per pg admin einspielen.
Das SQL Script was sich darin verbirgt kann ich nicht im PG admin ausführen.

danke schon mal für eure unterstützung

Homoran

@andré-koschnik sagte in Backup wiederherstellen:

muss ich das beheben?wenn ja wie?

@thomas-braun sagte in Backup wiederherstellen:

@andré-koschnik sagte in Backup wiederherstellen:

die sind aber nach einem neustart wieder weg oder?

Sollte...
Oder
sudo umount /opt/iobroker/backups

@andré-koschnik sagte in Backup wiederherstellen:

wieso gibt es keinen port der auf 5432 hört?
ich komme mit dem PG admin von anderen rechnern an die db
und kann ich das backfile der postgres per pg admin einspielen.
Das SQL Script was sich darin verbirgt kann ich nicht im PG admin ausführen.

das hat doch nichts mit iobroker zu tun!
oder?

André Koschnik

nein sorry,

dachte nur weil die backup node für die postges DB nicht funktioniert

Community Forum

NEWS

Backup wiederherstellen

Support us

781

32.4k

81.4k

1.3m