Test Adapter OpenDTU
-
@schoeppi_1 ```
code_text -
@schoeppi_1
Das muss jeweils in eigene Zeilen.
Du hast die Markierung direkt hinter den Profillink gepackt.
Also so:
Und wir sprachen von "nachholen" - nicht von nochmal posten. Das macht es noch schlimmer.
-
@codierknecht
Moin,
seit Version 1.0.0 muß ich den Adapter oft manuell starten - muß ich nach dem Update noch was tun ?
Sonst muß ich wohl ein Backup der Vorversion zurückholen
-
-
@friedhofsblond sagte in Test Adapter OpenDTU:
seit Version 1.0.0 muß ich den Adapter oft manuell starten
Hier nicht. Muss was individuelles bei dir sein.
-
@codierknecht
Wo hack ich das ein?
Auf dem system selber - da kommt dann aber viel ... -
Ja, da kommt viel...
Alles hier rein kopieren. -
ok - das passt?
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: ioserver Icon name: computer-desktop Chassis: desktop 🖥️ Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-13-amd64 Architecture: x86-64 Hardware Vendor: Intel_R_ Client Systems Hardware Model: NUC7CJYH Firmware Version: JYGLKCPX.86A.0070.2023.0505.1501 model name : Intel(R) Celeron(R) J4005 CPU @ 2.00GHz Docker : false Virtualization : none Kernel : x86_64 Userland : amd64 Systemuptime and Load: 14:10:02 up 3 min, 2 users, load average: 0.24, 0.36, 0.17 CPU threads: 2 *** Time and Time Zones *** Local time: Fri 2023-10-20 14:10:02 CEST Universal time: Fri 2023-10-20 12:10:02 UTC RTC time: Fri 2023-10-20 12:10:02 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** superuser /home/superuser superuser cdrom floppy sudo audio dip video plugdev users netdev iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: web Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 1.3G 6.0G 27M 877M 6.6G Swap: 1.0G 0B 1.0G Total: 8.9G 1.3G 7.1G 7556 M total memory 1239 M used memory 291 M active memory 1299 M inactive memory 5753 M free memory 43 M buffer memory 793 M swap cache 975 M total swap 0 M used swap 975 M free swap *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 756M 1.1M 755M 1% /run /dev/sda2 ext4 218G 7.9G 199G 4% / tmpfs tmpfs 3.7G 0 3.7G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/sda1 vfat 511M 9.8M 502M 2% /boot/efi tmpfs tmpfs 756M 20K 756M 1% /run/user/104 tmpfs tmpfs 756M 16K 756M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Oct 20 14:06:23 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Oct 20 14:06:24 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,relatime,errors=remount-ro `-/boot/efi /dev/sda1 vfat rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro Files in neuralgic directories: /var: 2.3G /var/ 1.9G /var/cache/apt 1.9G /var/cache 1.8G /var/cache/apt/archives 215M /var/log Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 20.5M in the file system. /opt/iobroker/backups: 2.4M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 70M /opt/iobroker/iobroker-data/ 34M /opt/iobroker/iobroker-data/backup-objects 15M /opt/iobroker/iobroker-data/files 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static The five largest files in iobroker-data are: 16M /opt/iobroker/iobroker-data/objects.jsonl 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 5.5M /opt/iobroker/iobroker-data/states.jsonl 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /home/iobroker/.diag.sh: line 277: nodejs: command not found /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 /usr/bin/corepack 0.18.0 /home/iobroker/.diag.sh: line 288: nodejs: command not found *** nodejs is NOT correctly installed *** nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bookworm/main amd64 Packages 100 /var/lib/dpkg/status 18.13.0+dfsg1-1 500 500 http://debian.inf.tu-dresden.de/debian bookworm/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: "javascript" not found Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : ioserver - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : ioserver - enabled system.adapter.discovery.0 : discovery : ioserver - disabled + system.adapter.email.0 : email : ioserver - enabled + system.adapter.influxdb.0 : influxdb : ioserver - enabled, port: 8086 system.adapter.mercedesme.0 : mercedesme : ioserver - disabled system.adapter.mqtt.1 : mqtt : ioserver - disabled, port: 1883, bind: 0.0.0.0 system.adapter.oilfox.0 : oilfox : ioserver - enabled + system.adapter.opendtu.0 : opendtu : ioserver - enabled + system.adapter.viessmannapi.0 : viessmannapi : ioserver - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioserver - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : ioserver - enabled, port: 8086 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.10.1 , installed 6.10.1 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mercedesme" : 0.1.1 , installed 0.1.1 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "oilfox" : 4.2.0 , installed 4.2.0 Adapter "opendtu" : 1.0.0 , installed 1.0.0 Adapter "viessmannapi" : 2.0.9 , installed 2.2.1 Objects and States Please stand by - This may take a while Objects: 9422 States: 7662 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bookworm-security InRelease Hit:2 http://debian.inf.tu-dresden.de/debian bookworm InRelease Hit:3 http://debian.inf.tu-dresden.de/debian bookworm-updates InRelease Hit:4 https://repos.influxdata.com/debian stable InRelease Hit:5 https://apt.grafana.com stable InRelease Get:6 https://deb.nodesource.com/node_18.x bookworm InRelease [4586 B] Fetched 4586 B in 1s (5014 B/s) Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:53939 0.0.0.0:* LISTEN 111 19304 1089/rpc.statd tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 13972 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 18510 559/sshd: /usr/sbin tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 19040 984/exim4 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19952 950/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 19959 950/iobroker.js-con tcp6 0 0 :::3000 :::* LISTEN 112 20042 948/grafana tcp6 0 0 ::1:25 :::* LISTEN 0 19041 984/exim4 tcp6 0 0 :::8081 :::* LISTEN 1001 20066 998/io.admin.0 tcp6 0 0 :::8086 :::* LISTEN 999 19602 590/influxd tcp6 0 0 :::9090 :::* LISTEN 0 18217 1/init tcp6 0 0 :::50057 :::* LISTEN 111 19310 1089/rpc.statd tcp6 0 0 :::111 :::* LISTEN 0 13974 1/init udp 0 0 127.0.0.1:841 0.0.0.0:* 0 19296 1089/rpc.statd udp 0 0 0.0.0.0:42092 0.0.0.0:* 111 19301 1089/rpc.statd udp 0 0 0.0.0.0:111 0.0.0.0:* 0 13973 1/init udp6 0 0 :::46604 :::* 111 19307 1089/rpc.statd udp6 0 0 :::111 :::* 0 13975 1/init *** Log File - Last 25 Lines *** 2023-10-20 14:06:42.384 - info: influxdb.0 (1041) enabled logging of Viessmann-Aussentemp, Alias=true, 19 points now activated 2023-10-20 14:06:42.385 - info: influxdb.0 (1041) enabled logging of Viessmann-Gas-Heizung-Tag, Alias=true, 20 points now activated 2023-10-20 14:06:42.385 - info: influxdb.0 (1041) enabled logging of Viessmann-Gas-WW-Tag, Alias=true, 21 points now activated 2023-10-20 14:06:42.385 - info: influxdb.0 (1041) enabled logging of Viessmann-Strom-Heizung-Tag, Alias=true, 22 points now activated 2023-10-20 14:06:42.385 - info: influxdb.0 (1041) enabled logging of Viessmann-WW-Temp, Alias=true, 23 points now activated 2023-10-20 14:06:42.386 - info: influxdb.0 (1041) enabled logging of Viessmann-VL-Temp, Alias=true, 24 points now activated 2023-10-20 14:06:42.386 - info: influxdb.0 (1041) enabled logging of Zisterne-Füllstand-Perc, Alias=true, 25 points now activated 2023-10-20 14:06:42.386 - info: influxdb.0 (1041) enabled logging of Zisterne-Füllstand-Liter, Alias=true, 26 points now activated 2023-10-20 14:06:42.386 - info: influxdb.0 (1041) enabled logging of B200-Letzte-Fahrt-km, Alias=true, 27 points now activated 2023-10-20 14:06:42.387 - info: influxdb.0 (1041) enabled logging of B200-Durchschnittsverbrauch-L, Alias=true, 28 points now activated 2023-10-20 14:06:42.387 - info: influxdb.0 (1041) enabled logging of B200-Durchschnittsverbrauch-letzte-Fahrt, Alias=true, 29 points now activated 2023-10-20 14:06:42.387 - info: influxdb.0 (1041) enabled logging of B200-KM-Stand, Alias=true, 30 points now activated 2023-10-20 14:06:42.455 - info: influxdb.0 (1041) Connected! 2023-10-20 14:06:44.858 - info: host.ioserver instance system.adapter.backitup.0 started with pid 1056 2023-10-20 14:06:46.078 - info: backitup.0 (1056) starting. Version 2.8.1 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.17.1, js-controller: 5.0.12 2023-10-20 14:06:46.124 - info: backitup.0 (1056) [iobroker] backup will be activated at 23:00 every 1 day(s) 2023-10-20 14:06:48.859 - info: host.ioserver instance system.adapter.opendtu.0 started with pid 1108 2023-10-20 14:06:49.077 - info: admin.0 (998) ==> Connected system.user.admin from ::ffff:192.168.115.175 2023-10-20 14:06:50.672 - info: opendtu.0 (1108) starting. Version 1.0.0 in /opt/iobroker/node_modules/iobroker.opendtu, node: v18.17.1, js-controller: 5.0.12 2023-10-20 14:06:51.433 - info: opendtu.0 (1108) Connect to OpenDTU over websocket connection. 2023-10-20 14:06:52.860 - info: host.ioserver instance system.adapter.viessmannapi.0 started with pid 1123 2023-10-20 14:06:54.081 - info: viessmannapi.0 (1123) starting. Version 2.2.1 in /opt/iobroker/node_modules/iobroker.viessmannapi, node: v18.17.1, js-controller: 5.0.12 2023-10-20 14:06:56.834 - info: host.ioserver instance scheduled system.adapter.oilfox.0 5 12 * * * 2023-10-20 14:07:05.584 - info: opendtu.0 (1108) Connect to OpenDTU over websocket connection. 2023-10-20 14:07:05.734 - info: viessmannapi.0 (1123) 1 installations found. -
X-Server: true
Schalt dem Desktop aus. Server werden exklusiv über die Kommandozeile administriert.
Setz den superuser in die Gruppe 'adm', sonst ist der nämlich nicht Super.
Und bring nodejs auf die aktuelle Version.
-
@thomas-braun
habe xfs installiert und Administration über Debian-Cockpit.
Superuser ist nicht der root sondern ein einfacher user.
Der Admin für IOB ist der Admin - nicht das wir uns mistverstehen.
-
@friedhofsblond sagte in Test Adapter OpenDTU:
habe xfs installiert und Administration über Debian-Cockpit.
Was ist das? Wofür braucht man das? Ich kenne das nur als Dateisystem.
Das der 'superuser' nicht root ist sehe ich. Aber dem fehlt zum super sein halt die Mitgliedschaft in 'adm'
-
@thomas-braun
sorry Xfce-Desktop - bin halt alt .... -
@friedhofsblond sagte in Test Adapter OpenDTU:
Xfce-Desktop
So ein Desktop (welcher auch immer) hat auf einem Server nix zu suchen.
-
Joh, auf einem Server läuft halt kein Desktop. Auch kein xfce. Hat auch mit dem Alter nix zu tun.
-
so, fällt Euch nochwas auf (ausser dem Xfce)
?Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: ioserver Icon name: computer-desktop Chassis: desktop 🖥️ Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-13-amd64 Architecture: x86-64 Hardware Vendor: Intel_R_ Client Systems Hardware Model: NUC7CJYH Firmware Version: JYGLKCPX.86A.0070.2023.0505.1501 model name : Intel(R) Celeron(R) J4005 CPU @ 2.00GHz Docker : false Virtualization : none Kernel : x86_64 Userland : amd64 Systemuptime and Load: 14:54:52 up 2 min, 2 users, load average: 0.19, 0.20, 0.08 CPU threads: 2 *** Time and Time Zones *** Local time: Fri 2023-10-20 14:54:52 CEST Universal time: Fri 2023-10-20 12:54:52 UTC RTC time: Fri 2023-10-20 12:54:52 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** superuser /home/superuser superuser adm cdrom floppy sudo audio dip video plugdev users netdev iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: web Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 1.2G 6.3G 27M 697M 6.7G Swap: 1.0G 0B 1.0G Total: 8.9G 1.2G 7.3G 7556 M total memory 1171 M used memory 213 M active memory 1162 M inactive memory 5986 M free memory 34 M buffer memory 630 M swap cache 975 M total swap 0 M used swap 975 M free swap *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 756M 1.1M 755M 1% /run /dev/sda2 ext4 218G 7.9G 199G 4% / tmpfs tmpfs 3.7G 0 3.7G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/sda1 vfat 511M 9.8M 502M 2% /boot/efi tmpfs tmpfs 756M 20K 756M 1% /run/user/104 tmpfs tmpfs 756M 16K 756M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Oct 20 14:52:44 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Oct 20 14:52:45 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,relatime,errors=remount-ro `-/boot/efi /dev/sda1 vfat rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro Files in neuralgic directories: /var: 2.4G /var/ 2.0G /var/cache 1.9G /var/cache/apt/archives 1.9G /var/cache/apt 215M /var/log Archived and active journals take up 198.6M in the file system. /opt/iobroker/backups: 2.4M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 60M /opt/iobroker/iobroker-data/ 34M /opt/iobroker/iobroker-data/backup-objects 15M /opt/iobroker/iobroker-data/files 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static sort: fflush failed: 'standard output': Broken pipe sort: write error The five largest files in iobroker-data are: 8.2M /opt/iobroker/iobroker-data/objects.jsonl 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 3.2M /opt/iobroker/iobroker-data/states.jsonl 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.13.0+dfsg1-1 500 500 http://debian.inf.tu-dresden.de/debian bookworm/main amd64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: "javascript" not found Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : ioserver - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : ioserver - enabled system.adapter.discovery.0 : discovery : ioserver - disabled + system.adapter.email.0 : email : ioserver - enabled + system.adapter.influxdb.0 : influxdb : ioserver - enabled, port: 8086 system.adapter.mercedesme.0 : mercedesme : ioserver - disabled system.adapter.mqtt.1 : mqtt : ioserver - disabled, port: 1883, bind: 0.0.0.0 system.adapter.oilfox.0 : oilfox : ioserver - enabled + system.adapter.opendtu.0 : opendtu : ioserver - enabled + system.adapter.terminal.0 : terminal : ioserver - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.viessmannapi.0 : viessmannapi : ioserver - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioserver - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : ioserver - enabled, port: 8086 + system.adapter.terminal.0 : terminal : ioserver - enabled, port: 8088, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.10.1 , installed 6.10.1 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "mercedesme" : 0.1.1 , installed 0.1.1 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "oilfox" : 4.2.0 , installed 4.2.0 Adapter "opendtu" : 1.0.0 , installed 1.0.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "viessmannapi" : 2.0.9 , installed 2.2.1 Objects and States Please stand by - This may take a while Objects: 9445 States: 7679 *** OS-Repositories and Updates *** Hit:1 http://debian.inf.tu-dresden.de/debian bookworm InRelease Hit:2 http://security.debian.org/debian-security bookworm-security InRelease Hit:3 http://debian.inf.tu-dresden.de/debian bookworm-updates InRelease Hit:4 https://apt.grafana.com stable InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:48497 0.0.0.0:* LISTEN 111 22545 1091/rpc.statd tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19494 953/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 20542 953/iobroker.js-con tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 19488 988/exim4 tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 14966 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 19016 567/sshd: /usr/sbin tcp6 0 0 ::1:25 :::* LISTEN 0 19489 988/exim4 tcp6 0 0 :::8088 :::* LISTEN 1001 21025 1156/io.terminal.0 tcp6 0 0 :::8081 :::* LISTEN 1001 20669 1002/io.admin.0 tcp6 0 0 :::8086 :::* LISTEN 999 17117 591/influxd tcp6 0 0 :::3000 :::* LISTEN 112 19513 952/grafana tcp6 0 0 :::111 :::* LISTEN 0 14968 1/init tcp6 0 0 :::37127 :::* LISTEN 111 22551 1091/rpc.statd tcp6 0 0 :::9090 :::* LISTEN 0 16646 1/init udp 0 0 0.0.0.0:111 0.0.0.0:* 0 14967 1/init udp 0 0 0.0.0.0:49340 0.0.0.0:* 111 22542 1091/rpc.statd udp 0 0 127.0.0.1:843 0.0.0.0:* 0 22537 1091/rpc.statd udp6 0 0 :::111 :::* 0 14969 1/init udp6 0 0 :::37763 :::* 111 22548 1091/rpc.statd *** Log File - Last 25 Lines *** 2023-10-20 14:53:03.484 - info: influxdb.0 (1045) enabled logging of Viessmann-Gas-WW-Tag, Alias=true, 21 points now activated 2023-10-20 14:53:03.484 - info: influxdb.0 (1045) enabled logging of Viessmann-Strom-Heizung-Tag, Alias=true, 22 points now activated 2023-10-20 14:53:03.484 - info: influxdb.0 (1045) enabled logging of Viessmann-WW-Temp, Alias=true, 23 points now activated 2023-10-20 14:53:03.485 - info: influxdb.0 (1045) enabled logging of Viessmann-VL-Temp, Alias=true, 24 points now activated 2023-10-20 14:53:03.485 - info: influxdb.0 (1045) enabled logging of Zisterne-Füllstand-Perc, Alias=true, 25 points now activated 2023-10-20 14:53:03.485 - info: influxdb.0 (1045) enabled logging of Zisterne-Füllstand-Liter, Alias=true, 26 points now activated 2023-10-20 14:53:03.485 - info: influxdb.0 (1045) enabled logging of B200-Letzte-Fahrt-km, Alias=true, 27 points now activated 2023-10-20 14:53:03.486 - info: influxdb.0 (1045) enabled logging of B200-Durchschnittsverbrauch-L, Alias=true, 28 points now activated 2023-10-20 14:53:03.486 - info: influxdb.0 (1045) enabled logging of B200-Durchschnittsverbrauch-letzte-Fahrt, Alias=true, 29 points now activated 2023-10-20 14:53:03.486 - info: influxdb.0 (1045) enabled logging of B200-KM-Stand, Alias=true, 30 points now activated 2023-10-20 14:53:03.490 - info: influxdb.0 (1045) Connected! 2023-10-20 14:53:06.011 - info: host.ioserver instance system.adapter.backitup.0 started with pid 1060 2023-10-20 14:53:07.223 - info: backitup.0 (1060) starting. Version 2.8.1 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.18.2, js-controller: 5.0.12 2023-10-20 14:53:07.268 - info: backitup.0 (1060) [iobroker] backup will be activated at 23:00 every 1 day(s) 2023-10-20 14:53:10.013 - info: host.ioserver instance system.adapter.opendtu.0 started with pid 1113 2023-10-20 14:53:11.095 - info: opendtu.0 (1113) starting. Version 1.0.0 in /opt/iobroker/node_modules/iobroker.opendtu, node: v18.18.2, js-controller: 5.0.12 2023-10-20 14:53:11.349 - info: opendtu.0 (1113) Connect to OpenDTU over websocket connection. 2023-10-20 14:53:14.011 - info: host.ioserver instance system.adapter.viessmannapi.0 started with pid 1128 2023-10-20 14:53:15.223 - info: viessmannapi.0 (1128) starting. Version 2.2.1 in /opt/iobroker/node_modules/iobroker.viessmannapi, node: v18.18.2, js-controller: 5.0.12 2023-10-20 14:53:18.059 - info: host.ioserver instance scheduled system.adapter.oilfox.0 5 12 * * * 2023-10-20 14:53:22.014 - info: host.ioserver instance system.adapter.terminal.0 started with pid 1156 2023-10-20 14:53:23.447 - info: terminal.0 (1156) starting. Version 1.0.0 in /opt/iobroker/node_modules/iobroker.terminal, node: v18.18.2, js-controller: 5.0.12 2023-10-20 14:53:23.492 - info: terminal.0 (1156) http server listening on port 8088 2023-10-20 14:53:25.953 - info: opendtu.0 (1113) Connect to OpenDTU over websocket connection. 2023-10-20 14:53:27.313 - info: viessmannapi.0 (1128) 1 installations found. -
@friedhofsblond sagte in Test Adapter OpenDTU:
sort: fflush failed: 'standard output': Broken pipe
sort: write errorKomische Meldung, sollte da nicht auftauchen.
Und schalt den Desktop AUS! -
@thomas-braun
OK ich schau mal nach.
Ansonsten beobachte ich mal was morgen so passiert.Danke erstmal
-
sehr geil
besten Dank! Ich musste das Script etwas anpassen, da ich dauerhaft die Grundlast einspeisen möchte. Am Tage sollte der Akku trotzdem noch voll werden, da ich noch weitere drei Module an 1300 Watt WR Leisung angeschlossen habe.ich habe jetzt dein erstes Script für meinen Zweck abgeändert, und Mal hier zur Begutachtung exportiert. Kannst Du deine 10 Watt Änderung an meinem angepassten Script noch einfügen?
Komme jetzt mit den zwei Abschnitten nicht ganz klar...
<xml xmlns="https://developers.google.com/blockly/xml"> <variables> <variable id="BN!a@q$SEAU4^)xo:SRJ">maxSolarPower</variable> <variable id="AcYpB0Ty+wVObL7=Y.a.">measuredPower</variable> <variable id="1}Q0686mMw0ZGk)e+r?(">measuredSolarPower</variable> <variable id="le#}gR{6G.yhW=x|6pS8">neededPower</variable> <variable id="X-B3:`dA%wy5$?]at5W-">NeededPowerPercent</variable> <variable id=":U;.Z4:pYNy(TwM9X-dL">storedNeededPower</variable> <variable id="}s`y%Qd}~t2t(jU$8(ud">upperLimit</variable> <variable id="P^1|W+9iVy?PgNp}9!.S">lowerLimit</variable> <variable id="?~:J:;gqC%-pt?=zNsH:">Sunrise</variable> <variable id="UJ`JGN{Ezb$K7jJ[4P}j">Sunset</variable> <variable id=")2]D^Y|D:QS6S[A}9J=/">SolarLimit</variable> </variables> <block type="schedule" id="!P+uzJ#%y!_wHsKqo2~M" x="-769" y="-524"> <field name="SCHEDULE">*/15 * * * * *</field> <statement name="STATEMENT"> <block type="controls_if" id="xaOp|xXgB@BB44iq}cJ."> <mutation else="1"></mutation> <value name="IF0"> <block type="time_compare_ex" id="Y8n@Iqzd:%qZbp|#P_v^"> <mutation xmlns="http://www.w3.org/1999/xhtml" end_time="true" actual_time="true"></mutation> <field name="USE_ACTUAL_TIME">TRUE</field> <field name="OPTION">between</field> <value name="START_TIME"> <shadow type="text" id="]-0N3DkP*7?ghtYzXwX!"> <field name="TEXT">10:00</field> </shadow> </value> <value name="END_TIME"> <shadow type="text" id="fBJt;J|@?8y+L|`jmRd9"> <field name="TEXT">09:00</field> </shadow> </value> </block> </value> <statement name="DO0"> <block type="variables_set" id="~p6WKGjCNU[UXfc{|$8|"> <field name="VAR" id="BN!a@q$SEAU4^)xo:SRJ">maxSolarPower</field> <value name="VALUE"> <block type="math_number" id="Z(v(#cMkS]/o.,;iyE/|"> <field name="NUM">600</field> </block> </value> <next> <block type="variables_set" id="Ih%sQzzK`!Ec=`tscEm-"> <field name="VAR" id="AcYpB0Ty+wVObL7=Y.a.">measuredPower</field> <value name="VALUE"> <block type="get_value" id="E60zTd:yszZT-@pD[YB#"> <field name="ATTR">val</field> <field name="OID">hm-rega.0.10421</field> </block> </value> <next> <block type="variables_set" id=":rlAB32E^@yPP9Jh?EMO"> <field name="VAR" id="1}Q0686mMw0ZGk)e+r?(">measuredSolarPower</field> <value name="VALUE"> <block type="get_value" id="Q8pLDlgI~N(N2-6)X@Qu"> <field name="ATTR">val</field> <field name="OID">opendtu.0.114182913679.ac.phase_1.power</field> </block> </value> <next> <block type="variables_set" id="t8-xB+K`%rr)x]%:Q5cN"> <field name="VAR" id="le#}gR{6G.yhW=x|6pS8">neededPower</field> <value name="VALUE"> <block type="math_arithmetic" id="2FaDMR/kS5K9d!j=`dK3"> <field name="OP">ADD</field> <value name="A"> <shadow type="math_number" id="2FEk%?jHI2)Hvf4}p|*;"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="Z`YZ!4FileGG?5VwaP-/"> <field name="VAR" id="AcYpB0Ty+wVObL7=Y.a.">measuredPower</field> </block> </value> <value name="B"> <shadow type="math_number" id="+10nRI6/x]hugF{/lmxM"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="n0BqKn~p@qPw.Jvfrj,s"> <field name="VAR" id="1}Q0686mMw0ZGk)e+r?(">measuredSolarPower</field> </block> </value> </block> </value> <next> <block type="variables_set" id="$61h{3os=)%X-VEx9M:i"> <field name="VAR" id="X-B3:`dA%wy5$?]at5W-">NeededPowerPercent</field> <value name="VALUE"> <block type="math_round" id="3$tH.4.P)ukPPcI4xw.A"> <field name="OP">ROUND</field> <value name="NUM"> <shadow type="math_number" id="{D8W1ElJ#97Cg:]vDkM;"> <field name="NUM">3.1</field> </shadow> <block type="math_arithmetic" id="ju~9S8j-`0c/OF%2$7-o"> <field name="OP">MULTIPLY</field> <value name="A"> <shadow type="math_number" id="6:p#t,*^;)z:Wb:@dc|3"> <field name="NUM">100</field> </shadow> </value> <value name="B"> <shadow type="math_number" id=".fYZ,3H9RSS}:wD=%Bvk"> <field name="NUM">1</field> </shadow> <block type="math_arithmetic" id="Z9S-r-/8^FbCeq,[{ULB"> <field name="OP">DIVIDE</field> <value name="A"> <shadow type="math_number" id="jul_lM$(9.yj`:ZH8}%@"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="_mPBX.l-0%hNvWtND[z1"> <field name="VAR" id="le#}gR{6G.yhW=x|6pS8">neededPower</field> </block> </value> <value name="B"> <shadow type="math_number" id="{Q+JfjzDv.)Z1KRbU*uv"> <field name="NUM">600</field> </shadow> <block type="variables_get" id="M!sN^/9!7$b}.ru.lqgC"> <field name="VAR" id="BN!a@q$SEAU4^)xo:SRJ">maxSolarPower</field> </block> </value> </block> </value> </block> </value> </block> </value> <next> <block type="variables_set" id="g3gA+F5X4*$4x2),%sJV"> <field name="VAR" id=":U;.Z4:pYNy(TwM9X-dL">storedNeededPower</field> <value name="VALUE"> <block type="get_value" id="7wbrC,7l;@ahCGcw2/pL"> <field name="ATTR">val</field> <field name="OID">0_userdata.0.PV-Anlage.storedNeededPowerHM600.storedNeededPower</field> </block> </value> <next> <block type="variables_set" id="2KI]WdQd`0MzEf%mOPaL"> <field name="VAR" id="}s`y%Qd}~t2t(jU$8(ud">upperLimit</field> <value name="VALUE"> <block type="math_round" id="Ha.~N]M`[1eWboby_aYe"> <field name="OP">ROUND</field> <value name="NUM"> <shadow type="math_number" id=":C/cpWh)P`-jK9}]IN*4"> <field name="NUM">3.1</field> </shadow> <block type="math_arithmetic" id="v}v!|Jkv3JHVqQR7poM0"> <field name="OP">ADD</field> <value name="A"> <shadow type="math_number" id="Nou}`9U#64_9EfeP$7E^"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="{dg*rTfc(I5I1PoYYN;l"> <field name="VAR" id=":U;.Z4:pYNy(TwM9X-dL">storedNeededPower</field> </block> </value> <value name="B"> <shadow type="math_number" id="D`~([S!SEua]l95F+#-*"> <field name="NUM">1</field> </shadow> <block type="math_arithmetic" id="#Aa[sC!ija_TtL9Go*jl"> <field name="OP">MULTIPLY</field> <value name="A"> <shadow type="math_number" id="GfovLR]X(6=?),|X/9K2"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="?YS@_}6Hup[`ZsLR!Z45"> <field name="VAR" id=":U;.Z4:pYNy(TwM9X-dL">storedNeededPower</field> </block> </value> <value name="B"> <shadow type="math_number" id="YxGb?xk[MY37)!7O-Cqe"> <field name="NUM">0.05</field> </shadow> </value> </block> </value> </block> </value> </block> </value> <next> <block type="variables_set" id="+KJ71_Z(eLN.a(uoEuci"> <field name="VAR" id="P^1|W+9iVy?PgNp}9!.S">lowerLimit</field> <value name="VALUE"> <block type="math_round" id="=HYNg!vGE)^Z7m{+e$cs"> <field name="OP">ROUND</field> <value name="NUM"> <shadow type="math_number" id="|d.50MyF$Zxnn(B]!gq~"> <field name="NUM">3.1</field> </shadow> <block type="math_arithmetic" id="?8HAOa[X,LM#h`p]lLc4"> <field name="OP">MINUS</field> <value name="A"> <shadow type="math_number" id="(8p!3BSrd)N0m`PVj}cd"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="?$cU!rsg;wkU}CP.VsR."> <field name="VAR" id=":U;.Z4:pYNy(TwM9X-dL">storedNeededPower</field> </block> </value> <value name="B"> <shadow type="math_number" id="@kP8*eoC!D4/Wa?%grKM"> <field name="NUM">1</field> </shadow> <block type="math_arithmetic" id="D$_kryX`Gb5eu$gnYS_q"> <field name="OP">MULTIPLY</field> <value name="A"> <shadow type="math_number" id="MHx^YJ`[IJHske|0K5}M"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="nrL6t1UCC{jy1*U[O|Xq"> <field name="VAR" id=":U;.Z4:pYNy(TwM9X-dL">storedNeededPower</field> </block> </value> <value name="B"> <shadow type="math_number" id="||~-FC.nb3oU=fuLJzw}"> <field name="NUM">0.1</field> </shadow> </value> </block> </value> </block> </value> </block> </value> <next> <block type="debug" id="8cGY=ms*^/Fbn#Cde4/e"> <field name="Severity">log</field> <value name="TEXT"> <shadow type="text" id="csk68CmH=pR,ptmE?y}5"> <field name="TEXT">test</field> </shadow> <block type="text_join" id="QUQf.~7J|ziuD3sLdl)|"> <mutation items="2"></mutation> <value name="ADD0"> <block type="text" id="lGPf[Ci!QdAF4j#Bn34-"> <field name="TEXT">Sonnenaufgang; </field> </block> </value> <value name="ADD1"> <block type="variables_get" id="kwmbl:u%6-!)]lE{Bhdj"> <field name="VAR" id="?~:J:;gqC%-pt?=zNsH:">Sunrise</field> </block> </value> </block> </value> <next> <block type="debug" id="yaFK]t~sZKg}j1WzH!TL"> <field name="Severity">log</field> <value name="TEXT"> <shadow type="text" id="A:^a.TTl)CuCY?K4{Z0;"> <field name="TEXT">test</field> </shadow> <block type="text_join" id="g_%Dq-ksE!p;Tib-dWoB"> <mutation items="2"></mutation> <value name="ADD0"> <block type="text" id="(bZZUaTT0bt~IQ|a~%#R"> <field name="TEXT">Sonnenuntergang; </field> </block> </value> <value name="ADD1"> <block type="variables_get" id="weuYcyZ5+:mfnpSK9UiP"> <field name="VAR" id="UJ`JGN{Ezb$K7jJ[4P}j">Sunset</field> </block> </value> </block> </value> <next> <block type="debug" id="1|f1K~GhCe(a;/q4o_X]"> <field name="Severity">log</field> <value name="TEXT"> <shadow type="text" id="WtDq6*-h|XRBClzt7C[}"> <field name="TEXT">test</field> </shadow> <block type="text_join" id="2Zo2{I0w6J%`$2:qEY1l"> <mutation items="2"></mutation> <value name="ADD0"> <block type="text" id="+YI.VRyx;em.YT$D(|bs"> <field name="TEXT">Istwert: </field> </block> </value> <value name="ADD1"> <block type="variables_get" id="z%3ACfZd0~)KLgj0p}%@"> <field name="VAR" id=":U;.Z4:pYNy(TwM9X-dL">storedNeededPower</field> </block> </value> </block> </value> <next> <block type="debug" id="r+xN[i`4xS-M`OYDBpb."> <field name="Severity">log</field> <value name="TEXT"> <shadow type="text" id="huRV|RwGh(WJG|l-)Aw`"> <field name="TEXT">test</field> </shadow> <block type="text_join" id="(f(78JM#Hy0@?Z0hJe~l"> <mutation items="2"></mutation> <value name="ADD0"> <block type="text" id="~}`O(MW.TU:J%_oS)#Xu"> <field name="TEXT">obere Grenze: </field> </block> </value> <value name="ADD1"> <block type="variables_get" id=",vBoJg7x{3!@v.c5w4q]"> <field name="VAR" id="}s`y%Qd}~t2t(jU$8(ud">upperLimit</field> </block> </value> </block> </value> <next> <block type="debug" id="qBNh2:P3U}F#$|$6FZFn"> <field name="Severity">log</field> <value name="TEXT"> <shadow type="text" id="2kPK8(t-SdR9TZvb.%-l"> <field name="TEXT">test</field> </shadow> <block type="text_join" id="}cq5v9RJT$55w(=?6BX)"> <mutation items="2"></mutation> <value name="ADD0"> <block type="text" id="*q^TTVgJ+?:b!z,x/S;V"> <field name="TEXT">untere Grenze: </field> </block> </value> <value name="ADD1"> <block type="variables_get" id="Vh$)4$K%:ZHW:~MiMXet"> <field name="VAR" id="P^1|W+9iVy?PgNp}9!.S">lowerLimit</field> </block> </value> </block> </value> <next> <block type="debug" id="k}*+@}8y%^u*6nB1JGm^"> <field name="Severity">log</field> <value name="TEXT"> <shadow type="text" id="p_lud?Lq-FYBOI}E.h])"> <field name="TEXT">test</field> </shadow> <block type="text_join" id="9O/.cB+R0J#M=YHuIJn?"> <mutation items="2"></mutation> <value name="ADD0"> <block type="text" id="3Uv-x,Irz%wnP{oXU!s^"> <field name="TEXT">benötigte Power in Prozent:</field> </block> </value> <value name="ADD1"> <block type="variables_get" id="T);Yxf;X[xS0z_7}_YkI"> <field name="VAR" id="X-B3:`dA%wy5$?]at5W-">NeededPowerPercent</field> </block> </value> </block> </value> <next> <block type="controls_if" id="//Rx),f%pyif!qW8O/?G"> <mutation elseif="1" else="1"></mutation> <value name="IF0"> <block type="logic_operation" id="6|n{EZ*g-L?wwMuw~`pt"> <field name="OP">AND</field> <value name="A"> <block type="logic_compare" id="@s)ep$AZC}nn4%[Y{zXv"> <field name="OP">GTE</field> <value name="A"> <block type="variables_get" id="rLGQIwoD@(-[)i.@Gek1"> <field name="VAR" id="X-B3:`dA%wy5$?]at5W-">NeededPowerPercent</field> </block> </value> <value name="B"> <block type="math_number" id="i.8)/]r6EY5E@{+61}ch"> <field name="NUM">100</field> </block> </value> </block> </value> <value name="B"> <block type="logic_compare" id="M%7gn=%*6!Oo0Iy!N0HE"> <field name="OP">EQ</field> <value name="A"> <block type="variables_get" id="FPBUa4}8MCdw~u2(u=Z4"> <field name="VAR" id=":U;.Z4:pYNy(TwM9X-dL">storedNeededPower</field> </block> </value> <value name="B"> <block type="math_number" id="])#t~DUCT78?qe_~1/X)"> <field name="NUM">100</field> </block> </value> </block> </value> </block> </value> <statement name="DO0"> <block type="debug" id="_|aD2Z`JU`?BoQCCcfTz"> <field name="Severity">log</field> <value name="TEXT"> <shadow type="text" id="wcNA/`cj2DUcJLr26^bd"> <field name="TEXT">keine Änderung, Wert ist gleich gespeichertem Wert</field> </shadow> </value> </block> </statement> <value name="IF1"> <block type="logic_operation" id="4WJuW,40dOlCCnG8!=A("> <field name="OP">OR</field> <value name="A"> <block type="logic_compare" id="0U*fZT58L0uKFJsD)N{;"> <field name="OP">GT</field> <value name="A"> <block type="variables_get" id="%=U`G7.6z`w:8|:XtgTI"> <field name="VAR" id="X-B3:`dA%wy5$?]at5W-">NeededPowerPercent</field> </block> </value> <value name="B"> <block type="variables_get" id="IE{(_NPVQP{:.^rxbG?4"> <field name="VAR" id="}s`y%Qd}~t2t(jU$8(ud">upperLimit</field> </block> </value> </block> </value> <value name="B"> <block type="logic_compare" id="7GGwP6lHcmy!ILxZJvYk"> <field name="OP">LT</field> <value name="A"> <block type="variables_get" id="EN^7brshgWEicI7V4)C!"> <field name="VAR" id="X-B3:`dA%wy5$?]at5W-">NeededPowerPercent</field> </block> </value> <value name="B"> <block type="variables_get" id="7B.88d1a^Hr`R-b6!iMZ"> <field name="VAR" id="P^1|W+9iVy?PgNp}9!.S">lowerLimit</field> </block> </value> </block> </value> </block> </value> <statement name="DO1"> <block type="controls_if" id="P8/_4.KJ/zZ6qh9iBh+o"> <mutation else="1"></mutation> <value name="IF0"> <block type="logic_compare" id="mk*xKT^,LdqKZpmRr}r4"> <field name="OP">LTE</field> <value name="A"> <block type="variables_get" id=".d_KP;p/?wytr_{S7(db"> <field name="VAR" id="le#}gR{6G.yhW=x|6pS8">neededPower</field> </block> </value> <value name="B"> <block type="variables_get" id="R!EQmKR0*lP1iR`NTG%f"> <field name="VAR" id="BN!a@q$SEAU4^)xo:SRJ">maxSolarPower</field> </block> </value> </block> </value> <statement name="DO0"> <block type="variables_set" id="v_^pc%4YAqueF4@xp/Ph"> <field name="VAR" id=")2]D^Y|D:QS6S[A}9J=/">SolarLimit</field> <value name="VALUE"> <block type="variables_get" id="rba!2I;EQyijkPfjo!Ze"> <field name="VAR" id="X-B3:`dA%wy5$?]at5W-">NeededPowerPercent</field> </block> </value> <next> <block type="update" id="E7HJvqAC,*BNAxN~e8sd"> <mutation xmlns="http://www.w3.org/1999/xhtml" delay_input="false"></mutation> <field name="OID">0_userdata.0.PV-Anlage.storedNeededPowerHM600.storedNeededPower</field> <field name="WITH_DELAY">FALSE</field> <value name="VALUE"> <block type="variables_get" id="hR1[WimPbd@1ICN+UAdn"> <field name="VAR" id="X-B3:`dA%wy5$?]at5W-">NeededPowerPercent</field> </block> </value> </block> </next> </block> </statement> <statement name="ELSE"> <block type="variables_set" id="iqqD`P-h34,:2q7p$CH|"> <field name="VAR" id=")2]D^Y|D:QS6S[A}9J=/">SolarLimit</field> <value name="VALUE"> <block type="math_number" id="dowAhu.+=iz#Wc-F]p:X"> <field name="NUM">100</field> </block> </value> <next> <block type="update" id="*?5=;cANP)NJ|KuX_[PF"> <mutation xmlns="http://www.w3.org/1999/xhtml" delay_input="false"></mutation> <field name="OID">0_userdata.0.PV-Anlage.storedNeededPowerHM600.storedNeededPower</field> <field name="WITH_DELAY">FALSE</field> <value name="VALUE"> <block type="math_number" id="7vXqNl1zb}n*oh6q3:]4"> <field name="NUM">100</field> </block> </value> </block> </next> </block> </statement> <next> <block type="controls_if" id="ngN)`(Ee_|WVjpbeEi,Z"> <value name="IF0"> <block type="logic_compare" id="E;jvy,d?,h~{8J-;$c#Z"> <field name="OP">LTE</field> <value name="A"> <block type="variables_get" id="j.wG0w+y^vE]tm7AZ2SR"> <field name="VAR" id=")2]D^Y|D:QS6S[A}9J=/">SolarLimit</field> </block> </value> <value name="B"> <block type="math_number" id="qmst0kfQa63`(1C?20+t"> <field name="NUM">4</field> </block> </value> </block> </value> <statement name="DO0"> <block type="variables_set" id="eG:yr(gAO*#W@6$4I,9T"> <field name="VAR" id=")2]D^Y|D:QS6S[A}9J=/">SolarLimit</field> <value name="VALUE"> <block type="math_number" id="0qq=Pa2L.`pfN{/fr=|V"> <field name="NUM">5</field> </block> </value> </block> </statement> <next> <block type="control" id="KN@t^0cE0k@-082b*`$}"> <mutation xmlns="http://www.w3.org/1999/xhtml" delay_input="false"></mutation> <field name="OID">opendtu.0.114182913679.power_control.limit_nonpersistent_relative</field> <field name="WITH_DELAY">FALSE</field> <value name="VALUE"> <block type="variables_get" id="T,9Ms}!g05fFGlV[=97t"> <field name="VAR" id=")2]D^Y|D:QS6S[A}9J=/">SolarLimit</field> </block> </value> <next> <block type="update" id="K~#2,NL{?T,t?vi8K@_K"> <mutation xmlns="http://www.w3.org/1999/xhtml" delay_input="false"></mutation> <field name="OID">0_userdata.0.PV-Anlage.Solarlimit_HM600.Solarlimit_HM600</field> <field name="WITH_DELAY">FALSE</field> <value name="VALUE"> <block type="variables_get" id="obffp}fvI-w|9kbk(:D7"> <field name="VAR" id=")2]D^Y|D:QS6S[A}9J=/">SolarLimit</field> </block> </value> <next> <block type="debug" id="4(mO4hae0d8|yCEDlMj~"> <field name="Severity">log</field> <value name="TEXT"> <shadow type="text" id="GhK9E*i9z*IoFuBKSaq1"> <field name="TEXT">test</field> </shadow> <block type="text_join" id="K$7:Tw;%Pm?f$3/:xV?V"> <mutation items="2"></mutation> <value name="ADD0"> <block type="text" id="tzX795?CuQ=.SGL`i!ns"> <field name="TEXT">gesetztes Limit: </field> </block> </value> <value name="ADD1"> <block type="variables_get" id="`hpd|~6gnaa1#A:#I^ku"> <field name="VAR" id=")2]D^Y|D:QS6S[A}9J=/">SolarLimit</field> </block> </value> </block> </value> </block> </next> </block> </next> </block> </next> </block> </next> </block> </statement> <statement name="ELSE"> <block type="debug" id="k-_yI!1YR}Cw@^zA*2By"> <field name="Severity">log</field> <value name="TEXT"> <shadow type="text" id="pOzzR,#7b~P,=jhm/QLz"> <field name="TEXT">keine Änderung</field> </shadow> </value> </block> </statement> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </statement> <statement name="ELSE"> <block type="debug" id="6hv2w66u%V}c3Ij`Q?pi"> <field name="Severity">log</field> <value name="TEXT"> <shadow type="text" id="LmPU])Tk80,#%40`K:m4"> <field name="TEXT">Zeit ist außerhalb der Reglungszeit.</field> </shadow> </value> </block> </statement> </block> </statement> </block> </xml>Ich lade mein Batterie tagsüber. Der dahinter geschaltete WR ist dann vom Netz getrennt. Wenn ich einspeise, ist das Ladegerät vom Netz getrennt. Ich weiß nicht ob man eine Batterie gleichzeitig laden und entladen kann, was Dir vermutlich vorschwebt?das Laden und Entladen parallel macht dem Akku nichts aus... Es geht und wird auch woanders genau so geregelt.
-
@knopers1
mal so nebenbei.
Ich frage mich immer wie lange solche Solarakkus halten - angeblich ja: 5.000-10.000 Ladezyklen.
Wenn gerade jetzt in der Übergangszeit mal Sonne, Wolken usw. sich zügig ablösen ist ja der Akku ständig am be/entladen. - Da ist der bald hin.
Oder wenn man mal den Herd anschaltet .... lässt sich sicher nicht einfach händeln. -
Alles angepasst aber irend etwas passt nicht...
bei 250 Watt Netzbezug, setzt das Script mein hm-600WR auf 10%-60 Watt bei 0 Watt Sonnenleistung
<xml xmlns="https://developers.google.com/blockly/xml"> <variables> <variable id="BN!a@q$SEAU4^)xo:SRJ">max_WR_Leistung</variable> <variable id="AcYpB0Ty+wVObL7=Y.a.">saldierte_Leistung</variable> <variable id="1}Q0686mMw0ZGk)e+r?(">IST-Wert_WR</variable> <variable id="le#}gR{6G.yhW=x|6pS8">SOLL-Wert_WR</variable> <variable id="av^_6@}eU-gIk%dJ,!,}">Stellwert_WR</variable> </variables> <block type="schedule" id="OO@|Rtoh_rlRKcPbfGAo" x="-2262" y="-1412"> <field name="SCHEDULE">0,10,20,30,40,50 * * * * *</field> <statement name="STATEMENT"> <block type="comment" id="!%pL=9LkG.9?H[$qx2YI"> <field name="COMMENT">wenn Nachteinspeisung aktiv</field> <next> <block type="controls_if" id="7T?Z|?Y5.p-:678Tx$Ti"> <value name="IF0"> <block type="get_value" id="E60zTd:yszZT-@pD[YB#"> <field name="ATTR">val</field> <field name="OID">hm-rega.0.10421</field> </block> </value> <statement name="DO0"> <block type="comment" id="un41CmgNYK(Y]/a|36h]"> <field name="COMMENT">Variablen beschreiben</field> <next> <block type="variables_set" id="EqaM{MYS7M6`-h;!zF93"> <field name="VAR" id="BN!a@q$SEAU4^)xo:SRJ">max_WR_Leistung</field> <value name="VALUE"> <block type="math_number" id="^w]xAxYJ7wN]m6;vk(fV"> <field name="NUM">600</field> </block> </value> <next> <block type="variables_set" id="wR,+k_F;sMBf]aAYh+~t"> <field name="VAR" id="AcYpB0Ty+wVObL7=Y.a.">saldierte_Leistung</field> <value name="VALUE"> <block type="get_value" id="RX$n4zq((b9U%h@.fnK,"> <field name="ATTR">val</field> <field name="OID">hm-rega.0.10421</field> </block> </value> <next> <block type="variables_set" id="~RRNE/ol!3MoTz;#)`PK"> <field name="VAR" id="1}Q0686mMw0ZGk)e+r?(">IST-Wert_WR</field> <value name="VALUE"> <block type="get_value" id="5CvJRCtL/p)gjkP2,A%K"> <field name="ATTR">val</field> <field name="OID">opendtu.0.114182913679.ac.phase_1.power</field> </block> </value> <next> <block type="variables_set" id="mZ+[ru,M.bbbDx$!%cbd"> <field name="VAR" id="le#}gR{6G.yhW=x|6pS8">SOLL-Wert_WR</field> <value name="VALUE"> <block type="math_arithmetic" id="rv08p$|]!!eg`$;G4?[t"> <field name="OP">ADD</field> <value name="A"> <shadow type="math_number" id="n}1O70OfJnrAub1M8c[r"> <field name="NUM">1</field> </shadow> <block type="math_arithmetic" id="3y=~@f2Qw!_YiJJ7yyxq"> <field name="OP">ADD</field> <value name="A"> <shadow type="math_number" id="qLf/8W@9:(9C9tZ0)%zs"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="0N8%)B@Js@QKG(.|9C;/"> <field name="VAR" id="AcYpB0Ty+wVObL7=Y.a.">saldierte_Leistung</field> </block> </value> <value name="B"> <shadow type="math_number" id="N@J09x*NDsor:$]CWIb)"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="k8CjoP?zy$q5sYiz|fp`"> <field name="VAR" id="1}Q0686mMw0ZGk)e+r?(">IST-Wert_WR</field> </block> </value> </block> </value> <value name="B"> <shadow type="math_number" id="RrKwrA08I}5~xOXJTY=l"> <field name="NUM">0</field> </shadow> </value> </block> </value> <next> <block type="comment" id="%`DgcG;amO_v`JekW7X#"> <field name="COMMENT">maximal WR Leistung einstellen</field> <next> <block type="controls_if" id="X.V3jJA5CZkZQUc%Yn{;"> <mutation elseif="3"></mutation> <value name="IF0"> <block type="logic_compare" id="TKLqCZMY~Wns-BS@K,K2"> <field name="OP">GTE</field> <value name="A"> <block type="variables_get" id="?B6HLx3_C%j{i`W3_h~4"> <field name="VAR" id="le#}gR{6G.yhW=x|6pS8">SOLL-Wert_WR</field> </block> </value> <value name="B"> <block type="variables_get" id="=j*pkdNV[O*7=,LmG^hL"> <field name="VAR" id="BN!a@q$SEAU4^)xo:SRJ">max_WR_Leistung</field> </block> </value> </block> </value> <statement name="DO0"> <block type="variables_set" id="T{[2|VMAG8kqI|/hwnX."> <field name="VAR" id="av^_6@}eU-gIk%dJ,!,}">Stellwert_WR</field> <value name="VALUE"> <block type="variables_get" id="YULaab+c`U9LO`fH91iU"> <field name="VAR" id="BN!a@q$SEAU4^)xo:SRJ">max_WR_Leistung</field> </block> </value> <next> <block type="comment" id="EK7aa~/95cKP_*9jtj~u"> <field name="COMMENT">Vermeidung W Änderungen > 10W wegen Schwingen</field> </block> </next> </block> </statement> <value name="IF1"> <block type="logic_compare" id="gVY;LPML8z$4uv`|Pif0"> <field name="OP">GTE</field> <value name="A"> <block type="variables_get" id="(@i,:QFP%Ui#$Qc#}9zK"> <field name="VAR" id="le#}gR{6G.yhW=x|6pS8">SOLL-Wert_WR</field> </block> </value> <value name="B"> <block type="math_arithmetic" id="qS;D4lv4a]J5@{4bq}}["> <field name="OP">ADD</field> <value name="A"> <shadow type="math_number" id="I_UEM;1#-apn7r1ubP.Q"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="E`wS@czP,1f}|UDsLxWy"> <field name="VAR" id="1}Q0686mMw0ZGk)e+r?(">IST-Wert_WR</field> </block> </value> <value name="B"> <shadow type="math_number" id="vc]UO5xK#u/;a[$nc{7L"> <field name="NUM">1</field> </shadow> <block type="math_number" id="=1.lbX$$-%3|HK%5O1s6"> <field name="NUM">10</field> </block> </value> </block> </value> </block> </value> <statement name="DO1"> <block type="variables_set" id="2hh%7nQbUqWU/c/oD;1]"> <field name="VAR" id="av^_6@}eU-gIk%dJ,!,}">Stellwert_WR</field> <value name="VALUE"> <block type="math_arithmetic" id="B0B7N@oj(qhgq.[CfLrm"> <field name="OP">ADD</field> <value name="A"> <shadow type="math_number" id="I_UEM;1#-apn7r1ubP.Q"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="~U[j;IW!IuC97gq%wTiT"> <field name="VAR" id="1}Q0686mMw0ZGk)e+r?(">IST-Wert_WR</field> </block> </value> <value name="B"> <shadow type="math_number" id="vc]UO5xK#u/;a[$nc{7L"> <field name="NUM">1</field> </shadow> <block type="math_number" id="npdn`ZMsF.UU%sumAg]f"> <field name="NUM">10</field> </block> </value> </block> </value> <next> <block type="comment" id="+52id[cI4NLN3rH@}5+9"> <field name="COMMENT">Vermeidung W Änderungen < 10W wegen Schwingen</field> </block> </next> </block> </statement> <value name="IF2"> <block type="logic_compare" id="cp:Gbx*F@Z)|d?I_*NM["> <field name="OP">LTE</field> <value name="A"> <block type="variables_get" id="!m{sPTYgujd)08}F(iiw"> <field name="VAR" id="le#}gR{6G.yhW=x|6pS8">SOLL-Wert_WR</field> </block> </value> <value name="B"> <block type="math_arithmetic" id="@tgzHg%Ae%v`SEE4*4Vh"> <field name="OP">MINUS</field> <value name="A"> <shadow type="math_number" id="I_UEM;1#-apn7r1ubP.Q"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="D:an~$hFrNvX$+lLY*)."> <field name="VAR" id="1}Q0686mMw0ZGk)e+r?(">IST-Wert_WR</field> </block> </value> <value name="B"> <shadow type="math_number" id="vc]UO5xK#u/;a[$nc{7L"> <field name="NUM">1</field> </shadow> <block type="math_number" id="c;wHpOxmnU[,woPIEeV^"> <field name="NUM">10</field> </block> </value> </block> </value> </block> </value> <statement name="DO2"> <block type="variables_set" id="0K$GCJ,wp=x$|NNUk}tJ"> <field name="VAR" id="av^_6@}eU-gIk%dJ,!,}">Stellwert_WR</field> <value name="VALUE"> <block type="math_arithmetic" id="J^O#Rg+68T:Xnfp?_IAb"> <field name="OP">MINUS</field> <value name="A"> <shadow type="math_number" id="I_UEM;1#-apn7r1ubP.Q"> <field name="NUM">1</field> </shadow> <block type="variables_get" id="E@NrHLM:p${9Orq}X6^w"> <field name="VAR" id="1}Q0686mMw0ZGk)e+r?(">IST-Wert_WR</field> </block> </value> <value name="B"> <shadow type="math_number" id="vc]UO5xK#u/;a[$nc{7L"> <field name="NUM">1</field> </shadow> <block type="math_number" id="~LDPUO1B|3*vKw~E+7Ji"> <field name="NUM">10</field> </block> </value> </block> </value> </block> </statement> <value name="IF3"> <block type="logic_operation" id="P_uomd33Pm,$sKLHaK?8"> <field name="OP">OR</field> <value name="A"> <block type="logic_compare" id="%9^pqGFOAdF_Q4+I_kk|"> <field name="OP">GTE</field> <value name="A"> <block type="variables_get" id="3FJ;ccWjMMWY975Kj@5s"> <field name="VAR" id="AcYpB0Ty+wVObL7=Y.a.">saldierte_Leistung</field> </block> </value> <value name="B"> <block type="math_number" id="3[DVAMar{wt_rK:[kRtU"> <field name="NUM">10</field> </block> </value> </block> </value> <value name="B"> <block type="logic_compare" id="H(i+-mX%!VeQT-k-dSW~"> <field name="OP">LTE</field> <value name="A"> <block type="variables_get" id="If*V!EDhw)-mx.R1T4n|"> <field name="VAR" id="AcYpB0Ty+wVObL7=Y.a.">saldierte_Leistung</field> </block> </value> <value name="B"> <block type="math_number" id="Ba7:PVdMPz2$p~*KFDnQ"> <field name="NUM">0</field> </block> </value> </block> </value> </block> </value> <statement name="DO3"> <block type="comment" id="f1T,}m=[3vLl{OBvCavV"> <field name="COMMENT">benötigte Leistung einstellen</field> <next> <block type="variables_set" id="N2`__2dpmt+NXIcxENW/"> <field name="VAR" id="av^_6@}eU-gIk%dJ,!,}">Stellwert_WR</field> <value name="VALUE"> <block type="variables_get" id=";3S?@Jd,;,GMMI=X8X,0"> <field name="VAR" id="le#}gR{6G.yhW=x|6pS8">SOLL-Wert_WR</field> </block> </value> </block> </next> </block> </statement> <next> <block type="comment" id="5V:8{H(Wby#lc(I7TXo3"> <field name="COMMENT">Vermeidung das SOLL-Wert < 10W wird</field> <next> <block type="controls_if" id="z~i9;MPg9rNBrD:.ZcHx"> <value name="IF0"> <block type="logic_compare" id="#wA@uq;vFm}184]3,XTf"> <field name="OP">LTE</field> <value name="A"> <block type="variables_get" id="b~F;nG1/8mo.0J8Qo;]3"> <field name="VAR" id="le#}gR{6G.yhW=x|6pS8">SOLL-Wert_WR</field> </block> </value> <value name="B"> <block type="math_number" id="1a.@~,.{Y9?msC|}i!Eh"> <field name="NUM">10</field> </block> </value> </block> </value> <statement name="DO0"> <block type="variables_set" id="y-1KyiEpr+hF9[GjI6yR"> <field name="VAR" id="av^_6@}eU-gIk%dJ,!,}">Stellwert_WR</field> <value name="VALUE"> <block type="math_number" id="ZCQw^kFMn*J`ypL@Xt.A"> <field name="NUM">10</field> </block> </value> </block> </statement> <next> <block type="control" id="%cOvD+Otu7dc3(7+Pt%?"> <mutation xmlns="http://www.w3.org/1999/xhtml" delay_input="false"></mutation> <field name="OID">opendtu.0.114182913679.power_control.limit_nonpersistent_relative</field> <field name="WITH_DELAY">FALSE</field> <value name="VALUE"> <block type="math_round" id="qp8W?7#X`RyZcY2C7b7k"> <field name="OP">ROUND</field> <value name="NUM"> <shadow type="math_number" id="OJ-sBUj]4[O=:~#bD`+/"> <field name="NUM">3.1</field> </shadow> <block type="variables_get" id="c;t^q^e_m6@Xsn@8(u`r"> <field name="VAR" id="av^_6@}eU-gIk%dJ,!,}">Stellwert_WR</field> </block> </value> </block> </value> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </next> </block> </statement> </block> </next> </block> </statement> </block> </xml>
