UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Thomas Braun]

@lessthanmore

Da gilt auch:

Da müssen Komponenten neugebaut werden. Mal deinstallieren und wieder drauf, dann sollte das automatisch passieren.

[lessthanmore]

@thomas-braun Leider nein, Fehler bleibt.

npm rebuild

endet ebenfalls mit dem Code 127.

Zurück auf 20 mittels

iob nodejs-update 20

resultiert in

Installing nodejs now!

Installing latest nodejs v20 release
W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details

SUCCESS!
v22.18.0 has been installed! You are using the latest nodejs@20 release now!

[Thomas Braun]

@lessthanmore sagte in Wir empfehlen: Node.js 22.x:

resultiert in
v22.18.0 has been installed! You are using the latest nodejs@20 release now!

Dann stimmt da irgendwas wohl grundsätzlich mit deinem nodejs nicht.

Ich hab gerade nochmal auf meinem Testsystem alles auf 20 gedrückt:

SUCCESS!
v20.19.4 has been installed! You are using the latest nodejs@20 release now!

Die Meldung passt.

Und zigbee2mqtt baut bei mir auch mit nodejs22:

2025-08-13 08:26:00.332  - info: zigbee2mqtt.0 (105824) starting. Version 3.0.9 in /opt/iobroker/node_modules/iobroker.zigbee2mqtt, node: v22.18.0, js-controller: 7.0.7
2025-08-13 08:26:00.360  - info: zigbee2mqtt.0 (105824) ================================= Adapter Config =================================
2025-08-13 08:26:00.361  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Frontend Scheme: http
2025-08-13 08:26:00.362  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Frontend Server: 
2025-08-13 08:26:00.362  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Frontend Port: 8080
2025-08-13 08:26:00.363  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Connection Type: ws
2025-08-13 08:26:00.363  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Scheme: ws
2025-08-13 08:26:00.363  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Server: 
2025-08-13 08:26:00.364  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Port: 8080
2025-08-13 08:26:00.365  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Auth-Token: unused
2025-08-13 08:26:00.365  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Websocket Dummy MQTT-Server: deactivated
2025-08-13 08:26:00.366  - info: zigbee2mqtt.0 (105824) || Zigbee2MQTT Debug Log: deactivated
2025-08-13 08:26:00.366  - info: zigbee2mqtt.0 (105824) || Proxy Zigbee2MQTT Logs to ioBroker Logs: activated
2025-08-13 08:26:00.366  - info: zigbee2mqtt.0 (105824) || Use Kelvin: no
2025-08-13 08:26:00.366  - info: zigbee2mqtt.0 (105824) || Use ColorTemperature ColorSync: no
2025-08-13 08:26:00.366  - info: zigbee2mqtt.0 (105824) || Use BrightnessMove OnOff: no
2025-08-13 08:26:00.367  - info: zigbee2mqtt.0 (105824) || Use BrightnessStep OnOff: no
2025-08-13 08:26:00.367  - info: zigbee2mqtt.0 (105824) || Use Event In Desc: yes
2025-08-13 08:26:00.367  - info: zigbee2mqtt.0 (105824) || Use Device Icons: no
2025-08-13 08:26:00.367  - info: zigbee2mqtt.0 (105824) || Use Simple Hold/Release State: yes
2025-08-13 08:26:00.367  - info: zigbee2mqtt.0 (105824) || Use Simple Move/Stop State: no
2025-08-13 08:26:00.368  - info: zigbee2mqtt.0 (105824) || Use Simple Press/Release State: no
2025-08-13 08:26:00.368  - info: zigbee2mqtt.0 (105824) || Use Automatic Coordinator Check: no
2025-08-13 08:26:00.368  - info: zigbee2mqtt.0 (105824) || Coordinator Check Loglevel: info
2025-08-13 08:26:00.368  - info: zigbee2mqtt.0 (105824) || Coordinator Check Cron : 0 3 * * *
2025-08-13 08:26:00.368  - info: zigbee2mqtt.0 (105824) ==================================================================================
2025-08-13 08:26:00.434  - warn: zigbee2mqtt.0 (105824) Please configure the Websoket connection!

Ist halt bei mir nicht konfiguriert, aber die Module werden gebaut.

[lessthanmore]

@thomas-braun Ja, bauen/ laufen ist kein Problem. Wirft aber dennoch die Meldungen.
Hatte den Adapter gelöscht und neu installiert + reboot. Keine Änderung.

Bin jetzt mit der "alten Anleitung" zurück auf 20.

[skvarel]

Danke!

iob nodejs-update hat geklappt.

(Raspberry4 mit Bookworm)

• PlatformBetriebssystem:linux
• Architektur:arm64
• CPUs:4
• Geschwindigkeit:1800 MHz
• Modell:Cortex-A72
• RAM:7.6 GB
• System-Betriebszeit:00:04:40
• Node.js:v22.18.0
• Zeit:1755067963199
• Zeitversatz:-120
• NPM:10.9.3
• Adapter-Anzahl:667
• Datenträgergröße:234.3 GB
• Freier Festplattenspeicher:227.6 GB
• Aktive Instanzen:46
• Pfad:/opt/iobroker/
• Betriebszeit:00:04:40
• aktiv:true
• _nodeCurrent:22.18.0
• _nodeNewest:22.18.0
• _nodeNewestNext:22.18.0
• _npmCurrent:10.9.3
• _npmNewest:10.9.3
• _npmNewestNext:10.9.3

[Thomas Braun]

@lessthanmore sagte in Wir empfehlen: Node.js 22.x:

Bin jetzt mit der "alten Anleitung" zurück auf 20.

Ich bin immer noch der Meinung, das du dann da eine 'komische' Installation hast.

[lessthanmore]

@thomas-braun

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: iobroker
       Icon name: computer-container
         Chassis: container ☐
  Virtualization: lxc
          Kernel: Linux 6.14.8-2-pve
    Architecture: x86-64
OS is similar to: 

model name	: 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 11:16:57 up  2:46,  1 user,  load average: 0.00, 0.00, 0.00
CPU threads: 2


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** TIME AND TIMEZONES ***
               Local time: Wed 2025-08-13 11:16:57 CEST
           Universal time: Wed 2025-08-13 09:16:57 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: inactive
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
michael
HOME=/home/michael
GROUPS=michael sudo users iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/michael
GROUPS=iobroker tty dialout audio video plugdev redis

*** DISPLAY-SERVER SETUP ***
Display-Server: 	false
Unit display-manager.service could not be found.
Display-Manager: 	
Desktop: 		
Session: 		tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.6G        1.2G        6.9G        1.2M        481M        7.4G
Swap:           536M          0B        536M
Total:          9.1G        1.2G        7.5G

Active iob-Instances: 	13

         8192 M total memory
         1108 M used memory
         1209 M active memory
          285 M inactive memory
         6625 M free memory
            0 M buffer memory
          459 M swap cache
          512 M total swap
            0 M used swap
          512 M free swap

*** top - Table Of Processes  ***
top - 11:16:58 up  2:46,  1 user,  load average: 0.00, 0.00, 0.00
Tasks:  47 total,   1 running,  46 sleeping,   0 stopped,   0 zombie
%Cpu(s):  4.3 us,  4.3 sy,  0.0 ni, 87.0 id,  0.0 wa,  0.0 hi,  4.3 si,  0.0 st 
MiB Mem :   8192.0 total,   6624.1 free,   1109.5 used,    459.4 buff/cache     
MiB Swap:    512.0 total,    512.0 free,      0.0 used.   7082.5 avail Mem 

*** FAILED SERVICES ***

  UNIT                 LOAD   ACTIVE SUB    DESCRIPTION
* run-rpc_pipefs.mount loaded failed failed RPC Pipe File System

Legend: LOAD   -> Reflects whether the unit definition was properly loaded.
        ACTIVE -> The high-level unit activation state, i.e. generalization of SUB.
        SUB    -> The low-level unit activation state, values depend on unit type.

1 loaded units listed.


*** DMESG CRITICAL ERRORS ***
dmesg: read kernel buffer failed: Operation not permitted
No critical errors detected

*** FILESYSTEM ***
Filesystem                       Type      Size  Used Avail Use% Mounted on
/dev/mapper/pve-vm--100--disk--0 ext4       25G  4.9G   19G  21% /
none                             tmpfs     492K  4.0K  488K   1% /dev
/dev/mapper/pve-root             ext4       67G  3.9G   60G   7% /dev/ttyACM0
udev                             devtmpfs   32G     0   32G   0% /dev/tty
tmpfs                            tmpfs      32G     0   32G   0% /dev/shm
tmpfs                            tmpfs      13G  152K   13G   1% /run
tmpfs                            tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs                            tmpfs      32G  976K   32G   1% /tmp
tmpfs                            tmpfs     6.3G  8.0K  6.3G   1% /run/user/1001

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET         SOURCE                                                 FSTYPE OPTIONS
/              /dev/mapper/pve-vm--100--disk--0                       ext4   rw,relatime,stripe=16
`-/dev/ttyACM0 /dev/mapper/pve-root[/var/lib/lxc/100/devices/ttyACM0] ext4   rw,relatime,errors=remount-ro

Files in neuralgic directories:

/var:
418M	/var/
213M	/var/lib
130M	/var/cache
126M	/var/cache/apt
89M	/var/lib/apt

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 24M in the file system.

/opt/iobroker/backups:
1.8M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
92M	/opt/iobroker/iobroker-data/
56M	/opt/iobroker/iobroker-data/files
38M	/opt/iobroker/iobroker-data/files/admin.admin/custom/assets
38M	/opt/iobroker/iobroker-data/files/admin.admin/custom
38M	/opt/iobroker/iobroker-data/files/admin.admin

The five largest files in iobroker-data are:
6.8M	/opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_file-saver_dist_FileSaver_min_js-node_modules_react-icons_di_index_mjs-n-0fd47d.a444afaa.chunk.js
5.3M	/opt/iobroker/iobroker-data/objects.jsonl
3.9M	/opt/iobroker/iobroker-data/files/backitup.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.92169c09.chunk.js
3.7M	/opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-ZPb95xPG.js
3.7M	/opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-Drg0QIRU.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2432650-if00

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs 	v20.19.4
/usr/bin/node 		v20.19.4
/usr/bin/npm 		10.8.2
/usr/bin/npx 		10.8.2
/usr/bin/corepack 	0.32.0

nodejs:
  Installed: 20.19.4-1nodesource1
  Candidate: 22.18.0-1nodesource1
  Version table:
     22.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.17.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.15.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.4.1-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
     22.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages
 *** 20.19.4-1nodesource1 100
        100 /var/lib/dpkg/status
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.

At least one iobroker host is running.

Objects type: redis
States  type: redis

Hosts:
iobroker            iobroker (version: 7.0.6, hostname: iobroker      , alive, uptime: 9992)

Core adapters versions
js-controller: 	7.0.6
admin: 		7.6.17
javascript: 	8.9.2

nodejs modules from github: 	1
+-- iobroker.husqvarna-automower@0.6.0-beta.12 (git+ssh://git@github.com/ice987987/ioBroker.husqvarna-automower.git#e43328543d35c4555a4a3f3e595dd16417978d85)

Adapter State
+ system.adapter.accuweather.0            : accuweather           : iobroker                                 -  enabled
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.homeconnect.0            : homeconnect           : iobroker                                 -  enabled
+ system.adapter.husqvarna-automower.0    : husqvarna-automower   : iobroker                                 -  enabled
  system.adapter.ical.0                   : ical                  : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
+ system.adapter.lovelace.0               : lovelace              : iobroker                                 -  enabled, port: 8091, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.openknx.0                : openknx               : iobroker                                 -  enabled
+ system.adapter.pushover.0               : pushover              : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.yahka.0                  : yahka                 : iobroker                                 -  enabled
+ system.adapter.zigbee2mqtt.0            : zigbee2mqtt           : iobroker                                 -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.lovelace.0               : lovelace              : iobroker                                 -  enabled, port: 8091, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "accuweather"  : 2.1.0    , installed 2.1.0
Adapter    "admin"        : 7.6.17   , installed 7.6.17
Adapter    "homeconnect"  : 1.4.3    , installed 1.4.3
Adapter    "ical"         : 1.16.2   , installed 1.16.2
Adapter    "javascript"   : 8.9.2    , installed 8.9.2
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "lovelace"     : 4.1.15   , installed 4.1.15
Adapter    "mqtt"         : 6.1.2    , installed 6.1.2
Adapter    "openknx"      : 0.9.0    , installed 0.9.0
Adapter    "pushover"     : 4.1.0    , installed 4.1.0
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 3.0.19
Adapter    "yahka"        : 1.0.3    , installed 1.0.3
Adapter    "zigbee2mqtt"  : 3.0.9    , installed 3.0.9

Objects and States
Please stand by - This may take a while
Objects: 	18993
States: 	7104

*** OS-Repositories and Updates ***
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Hit:1 http://security.debian.org trixie-security InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Pending Updates: 1

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:42847         0.0.0.0:*               LISTEN      1000       2535409    539/io.yahka.0      
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      107        2535936    323/mosquitto       
tcp        0      0 127.0.0.1:41907         0.0.0.0:*               LISTEN      1000       2535413    539/io.yahka.0      
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          2528715    1/init              
tcp        0      0 127.0.0.1:34161         0.0.0.0:*               LISTEN      1000       2535405    539/io.yahka.0      
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          2535667    288/master          
tcp        0      0 127.0.0.1:6379          0.0.0.0:*               LISTEN      105        2535506    138/redis-server 12 
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          2535668    288/master          
tcp6       0      0 ::1:6379                :::*                    LISTEN      105        2535507    138/redis-server 12 
tcp6       0      0 :::36289                :::*                    LISTEN      1000       2535327    539/io.yahka.0      
tcp6       0      0 :::33881                :::*                    LISTEN      1000       2535325    539/io.yahka.0      
tcp6       0      0 :::1883                 :::*                    LISTEN      107        2535937    323/mosquitto       
tcp6       0      0 :::32939                :::*                    LISTEN      1000       2535329    539/io.yahka.0      
tcp6       0      0 :::22                   :::*                    LISTEN      0          2532133    1/init              
tcp6       0      0 :::111                  :::*                    LISTEN      0          2528717    1/init              
tcp6       0      0 :::8091                 :::*                    LISTEN      1000       2535284    524/io.lovelace.0   
tcp6       0      0 :::8082                 :::*                    LISTEN      1000       2535370    569/io.web.0        
tcp6       0      0 :::8080                 :::*                    LISTEN      1001       2534659    141/node            
tcp6       0      0 :::8081                 :::*                    LISTEN      1000       2534661    342/io.admin.0      
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           106        2529247    132/avahi-daemon: r 
udp        0      0 0.0.0.0:47975           0.0.0.0:*                           106        2529249    132/avahi-daemon: r 
udp        0      0 0.0.0.0:51408           0.0.0.0:*                           1000       2535202    494/io.openknx.0    
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          2528716    1/init              
udp6       0      0 :::5353                 :::*                                106        2529248    132/avahi-daemon: r 
udp6       0      0 :::43720                :::*                                106        2529250    132/avahi-daemon: r 
udp6       0      0 :::111                  :::*                                0          2528718    1/init              

*** Log File - Last 25 Lines ***

2025-08-13 09:21:13.403  - error: admin.0 (342) Automatic repository update is not allowed more than once an hour
2025-08-13 09:36:25.746  - warn: javascript.0 (398) State "mqtt.0.nuki.35C7D56C.lockAction" not found
2025-08-13 09:36:25.749  - warn: javascript.0 (398)     at setState (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:2090:20)
2025-08-13 09:36:25.749  - warn: javascript.0 (398)     at Object.<anonymous> (script.js.common.Zentral.Anwesenheit:29:5)
2025-08-13 09:36:25.749  - warn: javascript.0 (398)     at Object.callback (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1452:38)
2025-08-13 09:36:25.749  - warn: javascript.0 (398)     at Object.stateChange (/opt/iobroker/node_modules/iobroker.javascript/main.js:645:29)
2025-08-13 09:36:25.749  - warn: javascript.0 (398)     at Immediate._onImmediate (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/build/cjs/lib/adapter/adapter.js:7336:48)
2025-08-13 09:36:25.749  - warn: javascript.0 (398)     at process.processImmediate (node:internal/timers:483:21)

[BigMike71]

Moin,
ich habe nen PI5 mit aktueller Installation laufen und alles soweit aktuell in Iobroker
gehalten.
Leider bekomme ich das Node.js nicht mit iob nodesjs-update hochgezogen.
Es kommt keinerlei ausgabe in der ssh shell...
komischerweise zeigt auch iob diag nichts an?!?

[Thomas Braun]

@lessthanmore sagte in Wir empfehlen: Node.js 22.x:

Installed: 20.19.4-1nodesource1 Candidate: 22.18.0-1nodesource1

Da ist die 22er-Quelle aktiv, dafür hängt die 20 ohne Anbindung an ein Repo da herum. Apt wird dir also nun immer die aktuelle Version aus dem 22-Zweig vorschlagen.
Und die Version ist auch nicht auf Prio 1001 gepinnt.
Das macht aber eigentlich alles iob nodejs-update für dich, wenn du die gewünschte Ziel-Version als Option mit gibst.

[Homoran]

@bigmike71 sagte in Wir empfehlen: Node.js 22.x:

komischerweise zeigt auch iob diag nichts an?

zeigen ;-)

Eingabe und (fehlende) Ausgabe bis zum nächsten Prompt

[BigMike71]

@homoran

mike@Pi5:~ $ iob diag
mike@Pi5:~ $ iob status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl
mike@Pi5:~ $ iob diag
mike@Pi5:~ $


mike@Pi5:~ $ iob version
7.0.7
mike@Pi5:~ $

mike@Pi5:~ $ iob diag
mike@Pi5:~ $

[Thomas Braun]

@bigmike71 sagte in Wir empfehlen: Node.js 22.x:

Es kommt keinerlei ausgabe in der ssh shell...
komischerweise zeigt auch iob diag nichts an?!?

Deutet auf Netzwerkprobleme hin. Beide Skripte werden jeweils frisch vom Server gezogen. 'Leider' werden aber Fehlermeldungen ausgeblendet, weswegen auch im Terminal nichts zu sehen ist.

Versuch es mal mit dem Befehl aus meiner Signatur, alternativ mit

curl -L -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

[BigMike71]

@thomas-braun
meine Netzwerk läuft hier zu 100%, was sollte da nicht richtig sein?
Systemupdate über sudo apt-get update und upgrade geht auch fehlerfrei...

[Thomas Braun]

@bigmike71

curl -L -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

[BigMike71]

@thomas-braun

========== Start marking the full check here ===========

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 12 (bookworm)
 Static hostname: Pi5
       Icon name: computer
          Kernel: Linux 6.6.47+rpt-rpi-2712
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 11:33:50 up 51 min,  1 user,  load average: 0.49, 0.43, 0.42
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Wed 2025-08-13 11:33:50 CEST
           Universal time: Wed 2025-08-13 09:33:50 UTC
                 RTC time: Wed 2025-08-13 09:33:50
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
mike
HOME=/home/mike
GROUPS=mike adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.4G        2.7G        3.6G         11M        2.3G        5.8G
Swap:           209M          0B        209M
Total:          8.6G        2.7G        3.8G

Active iob-Instances:   21

         8048 M total memory
         2551 M used memory
         2817 M active memory
         1378 M inactive memory
         3424 M free memory
          163 M buffer memory
         2017 M swap cache
          199 M total swap
            0 M used swap
          199 M free swap

*** top - Table Of Processes  ***
top - 11:33:51 up 51 min,  1 user,  load average: 0.49, 0.43, 0.42
Tasks: 201 total,   1 running, 200 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us, 50.0 sy,  0.0 ni, 50.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   8048.3 total,   3423.9 free,   2551.9 used,   2181.0 buff/cache
MiB Swap:    200.0 total,    200.0 free,      0.0 used.   5496.5 avail Mem

*** FAILED SERVICES ***

  UNIT                     LOAD   ACTIVE SUB    DESCRIPTION
* nvmf-autoconnect.service loaded failed failed Connect NVMe-oF subsystems automatically during boot

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.8G     0  3.8G   0% /dev
tmpfs          tmpfs     1.6G  5.5M  1.6G   1% /run
/dev/nvme0n1p2 ext4      229G   19G  199G   9% /
tmpfs          tmpfs     4.0G  5.6M  4.0G   1% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
/dev/nvme0n1p1 vfat      510M   66M  445M  13% /boot/firmware
tmpfs          tmpfs     805M     0  805M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Aug 13 10:42:34 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe  smsc95xx.macaddr=2C:CF:67:32:C2:78 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=6fe73f65-02 rootfstype=ext4 fsck.repair=yes rootwait
[Wed Aug 13 10:42:37 2025] EXT4-fs (nvme0n1p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none.
[Wed Aug 13 10:42:38 2025] EXT4-fs (nvme0n1p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/nvme0n1p2 ext4   rw,noatime
`-/boot/firmware /dev/nvme0n1p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
8.1G    /var/
3.6G    /var/log
3.5G    /var/log/journal/e2767c797fed49779b649eddbed462f7
3.5G    /var/log/journal
3.1G    /var/cache/apt

Archived and active journals take up 3.4G in the file system.

/opt/iobroker/backups:
108M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
229M    /opt/iobroker/iobroker-data/
123M    /opt/iobroker/iobroker-data/files
84M     /opt/iobroker/iobroker-data/backup-objects
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets

The five largest files in iobroker-data are:
20M     /opt/iobroker/iobroker-data/objects.jsonl
8.6M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js
4.6M    /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js
3.7M    /opt/iobroker/iobroker-data/files/javascript.admin/custom/assets/index-DXg_kRe6.js
3.7M    /opt/iobroker/iobroker-data/files/hmip.admin/custom/assets/index-HTN9Fhdh.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_b44d6fa857a4ed1180ce8a582981d5c7-if00-port0

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyUSB0

HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting:
tcp
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.4
/usr/bin/node           v20.19.4
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.32.0

nodejs:
  Installed: 20.19.4-1nodesource1
  Candidate: 20.19.4-1nodesource1
  Version table:
 *** 20.19.4-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.19.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:
Need to install the following packages:
is-my-node-vulnerable@1.6.1
Ok to proceed? (y) y



 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
Pi5                 Pi5 (version: 7.0.7, hostname: Pi5           , alive, uptime: 2342)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.2
javascript:     9.0.11

nodejs modules from github:     2
+-- iobroker.govee-app@0.0.3 (git+ssh://git@github.com/TA2k/ioBroker.govee-app.git#f7848a9817a15db547dd5fc7f332822752d9bed6)
`-- iobroker.zigbee@3.0.3 (git+ssh://git@github.com/ioBroker/ioBroker.zigbee.git#ff370acc5c61473cc0a008ff15a1f244a9bb73ee)

Adapter State
+ system.adapter.admin.0                  : admin                 : Pi5                                      -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.airquality.0             : airquality            : Pi5                                      - disabled
+ system.adapter.ankersolix2.0            : ankersolix2           : Pi5                                      -  enabled
+ system.adapter.backitup.0               : backitup              : Pi5                                      -  enabled
+ system.adapter.denon.0                  : denon                 : Pi5                                      -  enabled
+ system.adapter.enigma2.0                : enigma2               : Pi5                                      -  enabled
+ system.adapter.govee-app.0              : govee-app             : Pi5                                      -  enabled
  system.adapter.govee-local.0            : govee-local           : Pi5                                      - disabled
+ system.adapter.hmip.0                   : hmip                  : Pi5                                      -  enabled
  system.adapter.homeconnect.0            : homeconnect           : Pi5                                      - disabled
+ system.adapter.hue.0                    : hue                   : Pi5                                      -  enabled, port: 443
+ system.adapter.influxdb.0               : influxdb              : Pi5                                      -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : Pi5                                      -  enabled, port: 8086
  system.adapter.influxdb.2               : influxdb              : Pi5                                      - disabled, port: 8086
+ system.adapter.iot.0                    : iot                   : Pi5                                      -  enabled
+ system.adapter.javascript.0             : javascript            : Pi5                                      -  enabled
  system.adapter.lgtv.0                   : lgtv                  : Pi5                                      - disabled
+ system.adapter.modbus.0                 : modbus                : Pi5                                      -  enabled
  system.adapter.modbus.1                 : modbus                : Pi5                                      - disabled
  system.adapter.myuplink.0               : myuplink              : Pi5                                      - disabled
+ system.adapter.rpi2.0                   : rpi2                  : Pi5                                      -  enabled
+ system.adapter.shelly.0                 : shelly                : Pi5                                      -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : Pi5                                      -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : Pi5                                      -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : Pi5                                      -  enabled, port: 1884, bind: 0.0.0.0
  system.adapter.twinkly.0                : twinkly               : Pi5                                      - disabled
  system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : Pi5                                      - disabled
+ system.adapter.zigbee.0                 : zigbee                : Pi5                                      -  enabled, port: /dev/ttyUSB0
+ system.adapter.zigbee.1                 : zigbee                : Pi5                                      -  enabled, port: tcp://192.168.0.176:6638

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : Pi5                                      -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.hue.0                    : hue                   : Pi5                                      -  enabled, port: 443
+ system.adapter.influxdb.0               : influxdb              : Pi5                                      -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : Pi5                                      -  enabled, port: 8086
+ system.adapter.shelly.0                 : shelly                : Pi5                                      -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : Pi5                                      -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : Pi5                                      -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : Pi5                                      -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.zigbee.0                 : zigbee                : Pi5                                      -  enabled, port: /dev/ttyUSB0
+ system.adapter.zigbee.1                 : zigbee                : Pi5                                      -  enabled, port: tcp://192.168.0.176:6638

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): beta
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: beta
Adapter    "admin"        : 7.7.2    , installed 7.7.2
Adapter    "airquality"   : 0.1.5    , installed 0.1.5
Adapter    "ankersolix2"  : 2.2.0    , installed 2.2.0
Adapter    "backitup"     : 3.3.5    , installed 3.3.5
Adapter    "denon"        : 1.15.12  , installed 1.15.12
Adapter    "enigma2"      : 2.2.3    , installed 2.2.3
Adapter    "govee-local"  : 0.2.8    , installed 0.2.8
Adapter    "hmip"         : 1.27.0   , installed 1.27.0
Adapter    "homeconnect"  : 1.4.3    , installed 1.4.3
Adapter    "hue"          : 3.16.2   , installed 3.16.2
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 3.6.0    , installed 3.6.0
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "lgtv"         : 2.4.0    , installed 2.4.0
Adapter    "modbus"       : 6.4.0    , installed 6.4.0
Adapter    "myuplink"     : 0.8.4    , installed 0.8.4
Adapter    "rpi2"         : 2.4.0    , installed 2.4.0
Adapter    "shelly"       : 10.1.0   , installed 10.1.0
Adapter    "simple-api"   : 3.0.7    , installed 3.0.7
Adapter    "sonoff"       : 3.2.1    , installed 3.2.1
Adapter    "twinkly"      : 1.0.14   , installed 1.0.14
Adapter    "whatsapp-cmb" : 0.3.0    , installed 0.3.0
Adapter    "zigbee"       : 3.0.3    , installed 3.0.3

Objects and States
Please stand by - This may take a while
Objects:        8338
States:         6601

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://repos.influxdata.com/debian stable InRelease
Hit:6 https://apt.grafana.com stable InRelease
Hit:7 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists... Done
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:1884            0.0.0.0:*               LISTEN      1001       66414      60339/io.sonoff.0
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       68265      61131/io.shelly.1
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       65007      59763/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       65002      59763/iobroker.js-c
tcp        0      0 0.0.0.0:443             0.0.0.0:*               LISTEN      999        6656       961/pihole-FTL
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      999        6655       961/pihole-FTL
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      999        1992       961/pihole-FTL
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          6328       853/sshd: /usr/sbin
tcp        0      0 127.0.0.1:61209         0.0.0.0:*               LISTEN      0          7219       836/python3
tcp6       0      0 :::443                  :::*                    LISTEN      999        6658       961/pihole-FTL
tcp6       0      0 :::80                   :::*                    LISTEN      999        6657       961/pihole-FTL
tcp6       0      0 :::53                   :::*                    LISTEN      999        1994       961/pihole-FTL
tcp6       0      0 :::22                   :::*                    LISTEN      0          6330       853/sshd: /usr/sbin
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       69944      61166/io.simple-api
tcp6       0      0 :::8086                 :::*                    LISTEN      995        6668       909/influxd
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       63399      59781/io.admin.0
tcp6       0      0 :::3000                 :::*                    LISTEN      106        6712       1025/grafana
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        1798       706/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       65490      60310/io.shelly.0
udp        0      0 0.0.0.0:43039           0.0.0.0:*                           1001       137700     60310/io.shelly.0
udp        0      0 0.0.0.0:60398           0.0.0.0:*                           104        1800       706/avahi-daemon: r
udp        0      0 0.0.0.0:53              0.0.0.0:*                           999        1991       961/pihole-FTL
udp        0      0 0.0.0.0:123             0.0.0.0:*                           999        9268       961/pihole-FTL
udp6       0      0 :::5353                 :::*                                104        1799       706/avahi-daemon: r
udp6       0      0 :::34332                :::*                                104        1801       706/avahi-daemon: r
udp6       0      0 :::53                   :::*                                999        1993       961/pihole-FTL
udp6       0      0 :::123                  :::*                                999        5936       961/pihole-FTL

*** Log File - Last 25 Lines ***

2025-08-13 11:33:15.110  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string"
2025-08-13 11:33:32.234  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind_max" has to be type "number" but received type "string"
2025-08-13 11:33:32.290  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_absolut" has to be type "number" but received type "string"
2025-08-13 11:33:32.334  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string"
2025-08-13 11:33:35.920  - info: influxdb.0 (59873) Store 23 buffered influxDB history points
2025-08-13 11:33:55.130  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Aussentemperatur" has to be type "number" but received type "string"
2025-08-13 11:33:55.176  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Gefuehlte_Temperatur" has to be type "number" but received type "string"
2025-08-13 11:33:55.232  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind" has to be type "number" but received type "string"
2025-08-13 11:33:55.274  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind_max" has to be type "number" but received type "string"
2025-08-13 11:33:55.356  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_absolut" has to be type "number" but received type "string"
2025-08-13 11:33:55.403  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string"
2025-08-13 11:34:05.921  - info: influxdb.0 (59873) Store 29 buffered influxDB history points
2025-08-13 11:34:11.383  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Info.Solarenergie_Woche" has to be type "number" but received type "string"
2025-08-13 11:34:12.170  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Aussentemperatur" has to be type "number" but received type "string"
2025-08-13 11:34:12.221  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Gefuehlte_Temperatur" has to be type "number" but received type "string"
2025-08-13 11:34:12.272  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind_max" has to be type "number" but received type "string"
2025-08-13 11:34:12.316  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_absolut" has to be type "number" but received type "string"
2025-08-13 11:34:12.358  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string"
2025-08-13 11:34:29.105  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Aussentemperatur" has to be type "number" but received type "string"
2025-08-13 11:34:29.161  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Gefuehlte_Temperatur" has to be type "number" but received type "string"
2025-08-13 11:34:29.235  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind" has to be type "number" but received type "string"
2025-08-13 11:34:29.282  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Wind_max" has to be type "number" but received type "string"
2025-08-13 11:34:29.329  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_absolut" has to be type "number" but received type "string"
2025-08-13 11:34:29.378  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Druck_relativ" has to be type "number" but received type "string"
2025-08-13 11:34:29.433  - info: simple-api.0 (61166) State value to set for "0_userdata.0.Wetterstation.Sonnenstrahlung" has to be type "number" but received type "string"

============ Mark until here for C&P =============

iob diag has finished.

mike@Pi5:~ $ ^C
mike@Pi5:~ $

[Thomas Braun]

@bigmike71

Da fehlt der Anfang.

[BigMike71]

@thomas-braun
so nun alles einkopiert

[Thomas Braun]

@bigmike71

iob nodejs-update

ist immer noch schweigsam?

Dann versuch mal

curl -L -o node-update.sh https://raw.githubusercontent.com/Grothesk242/ioBroker/refs/heads/master/node-update.sh && bash node-update.sh

[BigMike71]

@thomas-braun
prima das script hat geholfen, jedoch gibt immer noch keine ausgaben bei iob diag und co... was das wohl ist

[Thomas Braun]

@bigmike71 sagte in Wir empfehlen: Node.js 22.x:

jedoch gibt immer noch keine ausgaben bei iob diag und co... was das wohl ist

Was spuckt denn der curl-Befehl aus, wenn das nicht direkt in die bash gekippt wird?
Also nur

curl -L -o node-update.sh https://raw.githubusercontent.com/Grothesk242/ioBroker/refs/heads/master/node-update.sh