NEWS
Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie'
Pflege des Betriebssystems
227
Beiträge
45
Kommentatoren
44.9k
Aufrufe
49
Watching
-
Hallo, kann man den irgendwie mit dem vorhandenen iobroker umziehen wenn man eine neuinstallation von debian 13 gemacht hat, durch sicherungen?
Danke, Gruß Thorsten
Du kannst auf dem alten System mit dem Backitup-Adapter das komplette System sichern und mit diesem Backup den ioBroker auf dem neuen System wiederrum mit dem Backitup-Adapter eins zu eins wiederherstellen.
Am einfachsten funktioniert das, wenn der neue Server exakt denselben hostname und dieselbe IP wie das Altsystem hat.
-
Du kannst auf dem alten System mit dem Backitup-Adapter das komplette System sichern und mit diesem Backup den ioBroker auf dem neuen System wiederrum mit dem Backitup-Adapter eins zu eins wiederherstellen.
Am einfachsten funktioniert das, wenn der neue Server exakt denselben hostname und dieselbe IP wie das Altsystem hat.
@Meister-Mopper super danke dir. Dann werde ich auf auf meinem Look einfach einen zweiten iobroker installieren und dann umziehen. Da kann ich ja jederzeit wieder zurück
-
Hallo zusammen, auf meinen Raspi 4 läuft:
Distributor ID: Debian Description: Debian GNU/Linux 12 (bookworm) Release: 12 Codename: bookwormNeben iobroker ist auch Homebridge installiert. Mache regelmäßig:
sudo apt update sudo apt upgradeHabe von alle Blockly Scripten sowie sämtliche Backups manuell gezogen, Grafana, InfluxDB, Zigbee und Zigbee2Mqtt, iQontrol VIS...
Ich hab etwas Respekt davor wenn ich update auf Debian 13 das es mir irgendetwas kaputt macht. Es steckt soviel Arbeit darin. Ich habe über das Forum schon viel gelernt und vieles Umgesetzt. Würde mir jemand behilflich sein oder würdet Ihr eher davon abraten? -
Hallo zusammen, auf meinen Raspi 4 läuft:
Distributor ID: Debian Description: Debian GNU/Linux 12 (bookworm) Release: 12 Codename: bookwormNeben iobroker ist auch Homebridge installiert. Mache regelmäßig:
sudo apt update sudo apt upgradeHabe von alle Blockly Scripten sowie sämtliche Backups manuell gezogen, Grafana, InfluxDB, Zigbee und Zigbee2Mqtt, iQontrol VIS...
Ich hab etwas Respekt davor wenn ich update auf Debian 13 das es mir irgendetwas kaputt macht. Es steckt soviel Arbeit darin. Ich habe über das Forum schon viel gelernt und vieles Umgesetzt. Würde mir jemand behilflich sein oder würdet Ihr eher davon abraten?@marcelinho sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Würde mir jemand behilflich sein oder würdet Ihr eher davon abraten?
Da wird dir keiner von 'abraten', weil es unvermeidlich ist rechtzeitig auf das aktuelle stable-Release zu gehen.
Mach einen separaten Thread mit deinem Anliegen auf und poste dort die Ausgabe voniob diagdamit man sieht wo du genau herkommst.
-
@marcelinho sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Würde mir jemand behilflich sein oder würdet Ihr eher davon abraten?
Da wird dir keiner von 'abraten', weil es unvermeidlich ist rechtzeitig auf das aktuelle stable-Release zu gehen.
Mach einen separaten Thread mit deinem Anliegen auf und poste dort die Ausgabe voniob diagdamit man sieht wo du genau herkommst.
@Thomas-Braun danke für deine Hilfe, anbei:
========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.47+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 18:31:23 up 8 min, 3 users, load average: 3.00, 4.20, 2.57 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2026-01-02 18:31:23 CET Universal time: Fri 2026-01-02 17:31:23 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 3.2G 319M 69K 583M 811M Swap: 209M 159M 50M Total: 4.2G 3.3G 369M Active iob-Instances: 27 3796 M total memory 3022 M used memory 1966 M active memory 1326 M inactive memory 304 M free memory 48 M buffer memory 508 M swap cache 199 M total swap 151 M used swap 48 M free swap *** top - Table Of Processes *** top - 18:31:24 up 8 min, 3 users, load average: 3.00, 4.20, 2.57 Tasks: 237 total, 1 running, 236 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 14.3 sy, 0.0 ni, 85.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3796.9 total, 304.0 free, 3023.2 used, 557.0 buff/cache MiB Swap: 200.0 total, 48.1 free, 151.9 used. 773.7 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 760M 1.3M 759M 1% /run /dev/mmcblk0p2 ext4 29G 18G 9.6G 65% / tmpfs tmpfs 1.9G 8.0K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 78M 433M 16% /boot/firmware tmpfs tmpfs 380M 44K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Jan 2 18:22:34 2026] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 numa=fake=2 system_heap.max_order=0 smsc95xx.macaddr=D8:3A:DD:1A:71:9B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=1e048ecb-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Jan 2 18:22:36 2026] EXT4-fs (mmcblk0p2): mounted filesystem cb6f0e18-5add-4177-ab98-e9f0235e06b3 ro with ordered data mode. Quota mode: none. [Fri Jan 2 18:22:37 2026] EXT4-fs (mmcblk0p2): re-mounted cb6f0e18-5add-4177-ab98-e9f0235e06b3 r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.4G /var/ 1.8G /var/cache/apt 1.8G /var/cache 1.7G /var/cache/apt/archives 911M /var/log Archived and active journals take up 908.7M in the file system. /opt/iobroker/backups: 145M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.8G /opt/iobroker/iobroker-data/ 1.4G /opt/iobroker/iobroker-data/history 236M /opt/iobroker/iobroker-data/files 109M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 44M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map 9.8M /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json 9.8M /opt/iobroker/iobroker-data/files/homekit-controller.admin/static/js/main.f592ece1.js 9.3M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4452914ae9ded11bf33d1a5a7669f5d-if00-port0 *** ZigBee Settings *** Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.21.1 /usr/bin/node v22.21.1 /usr/bin/npm 11.6.4 /usr/bin/npx 11.6.4 /usr/bin/corepack 0.34.0 nodejs: Installed: 22.21.1-1nodesource1 Candidate: 22.21.1-1nodesource1 Version table: *** 22.21.1-1nodesource1 100 100 /var/lib/dpkg/status Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 508) Core adapters versions js-controller: 7.0.7 admin: 7.7.19 javascript: 9.0.11 nodejs modules from github: 1 +-- homebridge-tapo@1.4.17 (git+ssh://git@github.com/apatsufas/homebridge-tapo-p100.git#8d25f8ab9ffc1d7cca1118cd0081d1ba28fd3cd1) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.awtrix-light.0 : awtrix-light : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.daikin-cloud.0 : daikin-cloud : raspberrypi - enabled + system.adapter.daikin.0 : daikin : raspberrypi - enabled + system.adapter.daikin.1 : daikin : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.ecovacs-deebot.0 : ecovacs-deebot : raspberrypi - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.homeconnect.0 : homeconnect : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.iqontrol.0 : iqontrol : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lg-thinq.0 : lg-thinq : raspberrypi - enabled + system.adapter.meross.0 : meross : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.myenergi.0 : myenergi : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : raspberrypi - enabled + system.adapter.sun2000.0 : sun2000 : raspberrypi - enabled, port: 502 + system.adapter.tesla-motors.0 : tesla-motors : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-2.0 : vis-2 : raspberrypi - disabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee2mqtt.0 : zigbee2mqtt : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sun2000.0 : sun2000 : raspberrypi - enabled, port: 502 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.19 , installed 7.7.19 Adapter "awtrix-light" : 3.0.0 , installed 3.0.0 Adapter "backitup" : 3.3.10 , installed 3.3.10 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daikin" : 1.5.1 , installed 1.5.1 Adapter "daikin-cloud" : 0.4.12 , installed 0.4.12 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "ecovacs-deebot": 1.4.15 , installed 1.4.15 Adapter "energiefluss-erweitert": 0.8.1, installed 0.8.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "homekit-controller": 0.5.11, installed 0.5.11 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "javascript" : 9.0.11 , installed 9.0.11 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "lg-thinq" : 1.1.3 , installed 1.1.3 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "mqtt-client" : 3.0.0 , installed 3.0.0 Adapter "myenergi" : 0.0.3 , installed 0.0.3 Adapter "openhab" : 1.2.0 , installed 1.2.0 Adapter "shelly" : 10.4.1 , installed 10.4.1 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "sun2000" : 2.3.5 , installed 2.3.5 Adapter "tesla-motors" : 1.3.2 , installed 1.3.2 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "vis-2" : 2.13.4 , installed 2.13.8 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 3.1.5 , installed 3.1.5 Adapter "zigbee2mqtt" : 3.0.9 , installed 3.0.9 Objects and States Please stand by - This may take a while Objects: 6444 States: 5058 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bookworm InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bookworm InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:38713 0.0.0.0:* LISTEN 112 7895 1261/homebridge: ho tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 1001 11993 2134/node tcp 0 0 127.0.0.1:42175 0.0.0.0:* LISTEN 112 8001 1241/homebridge: ho tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 114 7397 770/mosquitto tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 11907 1988/io.shelly.0 tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 12592 1995/io.mqtt.0 tcp 0 0 127.0.0.1:34053 0.0.0.0:* LISTEN 112 7913 1248/homebridge: @0 tcp 0 0 127.0.0.1:42345 0.0.0.0:* LISTEN 112 8650 1240/homebridge: ho tcp 0 0 127.0.0.1:38275 0.0.0.0:* LISTEN 112 7997 1279/homebridge: ho tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 1979 762/cupsd tcp 0 0 127.0.0.1:45787 0.0.0.0:* LISTEN 112 7902 1247/homebridge: ho tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 8426 991/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 9438 991/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 5880 775/sshd: /usr/sbin tcp 0 0 127.0.0.1:45135 0.0.0.0:* LISTEN 112 9653 1259/homebridge: ho tcp 0 0 127.0.0.1:37043 0.0.0.0:* LISTEN 112 8660 1267/homebridge: ho tcp6 0 0 ::1:631 :::* LISTEN 0 1978 762/cupsd tcp6 0 0 :::52403 :::* LISTEN 112 9624 1247/homebridge: ho tcp6 0 0 :::44253 :::* LISTEN 112 7858 1267/homebridge: ho tcp6 0 0 :::8081 :::* LISTEN 1001 9997 1464/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 19110 3344/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 7168 878/influxd tcp6 0 0 :::32570 :::* LISTEN 112 10548 1261/homebridge: ho tcp6 0 0 :::1883 :::* LISTEN 114 7398 770/mosquitto tcp6 0 0 :::8581 :::* LISTEN 112 10450 1108/hb-service tcp6 0 0 :::37356 :::* LISTEN 112 8572 1248/homebridge: @0 tcp6 0 0 :::53299 :::* LISTEN 112 7931 1259/homebridge: ho tcp6 0 0 :::22 :::* LISTEN 0 5882 775/sshd: /usr/sbin tcp6 0 0 :::3000 :::* LISTEN 113 8468 990/grafana tcp6 0 0 :::52120 :::* LISTEN 112 9612 1279/homebridge: ho tcp6 0 0 :::47961 :::* LISTEN 112 7846 1240/homebridge: ho tcp6 0 0 :::39667 :::* LISTEN 112 10537 1241/homebridge: ho tcp6 0 0 :::51798 :::* LISTEN 112 7831 1206/homebridge udp 0 0 0.0.0.0:5353 0.0.0.0:* 112 7868 1241/homebridge: ho udp 0 0 0.0.0.0:5353 0.0.0.0:* 112 10447 1108/hb-service udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5759 593/avahi-daemon: r udp 0 0 0.0.0.0:57147 0.0.0.0:* 104 5761 593/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 14474 1766/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 14481 1766/io.tuya.0 udp6 0 0 :::5353 :::* 104 5760 593/avahi-daemon: r udp6 0 0 :::52580 :::* 104 5762 593/avahi-daemon: r udp6 0 0 fe80::81a3:20c2:583:546 :::* 0 7484 704/NetworkManager *** Log File - Last 25 Lines ***============ Mark until here for C&P =============
iob diag has finished.
-
@Thomas-Braun danke für deine Hilfe, anbei:
========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.12.47+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 18:31:23 up 8 min, 3 users, load average: 3.00, 4.20, 2.57 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2026-01-02 18:31:23 CET Universal time: Fri 2026-01-02 17:31:23 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 3.2G 319M 69K 583M 811M Swap: 209M 159M 50M Total: 4.2G 3.3G 369M Active iob-Instances: 27 3796 M total memory 3022 M used memory 1966 M active memory 1326 M inactive memory 304 M free memory 48 M buffer memory 508 M swap cache 199 M total swap 151 M used swap 48 M free swap *** top - Table Of Processes *** top - 18:31:24 up 8 min, 3 users, load average: 3.00, 4.20, 2.57 Tasks: 237 total, 1 running, 236 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 14.3 sy, 0.0 ni, 85.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3796.9 total, 304.0 free, 3023.2 used, 557.0 buff/cache MiB Swap: 200.0 total, 48.1 free, 151.9 used. 773.7 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 760M 1.3M 759M 1% /run /dev/mmcblk0p2 ext4 29G 18G 9.6G 65% / tmpfs tmpfs 1.9G 8.0K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 78M 433M 16% /boot/firmware tmpfs tmpfs 380M 44K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Jan 2 18:22:34 2026] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 numa=fake=2 system_heap.max_order=0 smsc95xx.macaddr=D8:3A:DD:1A:71:9B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=1e048ecb-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Jan 2 18:22:36 2026] EXT4-fs (mmcblk0p2): mounted filesystem cb6f0e18-5add-4177-ab98-e9f0235e06b3 ro with ordered data mode. Quota mode: none. [Fri Jan 2 18:22:37 2026] EXT4-fs (mmcblk0p2): re-mounted cb6f0e18-5add-4177-ab98-e9f0235e06b3 r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.4G /var/ 1.8G /var/cache/apt 1.8G /var/cache 1.7G /var/cache/apt/archives 911M /var/log Archived and active journals take up 908.7M in the file system. /opt/iobroker/backups: 145M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.8G /opt/iobroker/iobroker-data/ 1.4G /opt/iobroker/iobroker-data/history 236M /opt/iobroker/iobroker-data/files 109M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 44M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map 9.8M /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json 9.8M /opt/iobroker/iobroker-data/files/homekit-controller.admin/static/js/main.f592ece1.js 9.3M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4452914ae9ded11bf33d1a5a7669f5d-if00-port0 *** ZigBee Settings *** Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.21.1 /usr/bin/node v22.21.1 /usr/bin/npm 11.6.4 /usr/bin/npx 11.6.4 /usr/bin/corepack 0.34.0 nodejs: Installed: 22.21.1-1nodesource1 Candidate: 22.21.1-1nodesource1 Version table: *** 22.21.1-1nodesource1 100 100 /var/lib/dpkg/status Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 508) Core adapters versions js-controller: 7.0.7 admin: 7.7.19 javascript: 9.0.11 nodejs modules from github: 1 +-- homebridge-tapo@1.4.17 (git+ssh://git@github.com/apatsufas/homebridge-tapo-p100.git#8d25f8ab9ffc1d7cca1118cd0081d1ba28fd3cd1) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.awtrix-light.0 : awtrix-light : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.daikin-cloud.0 : daikin-cloud : raspberrypi - enabled + system.adapter.daikin.0 : daikin : raspberrypi - enabled + system.adapter.daikin.1 : daikin : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.ecovacs-deebot.0 : ecovacs-deebot : raspberrypi - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.homeconnect.0 : homeconnect : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.iqontrol.0 : iqontrol : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lg-thinq.0 : lg-thinq : raspberrypi - enabled + system.adapter.meross.0 : meross : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.myenergi.0 : myenergi : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.statistics.0 : statistics : raspberrypi - enabled + system.adapter.sun2000.0 : sun2000 : raspberrypi - enabled, port: 502 + system.adapter.tesla-motors.0 : tesla-motors : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-2.0 : vis-2 : raspberrypi - disabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee2mqtt.0 : zigbee2mqtt : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sun2000.0 : sun2000 : raspberrypi - enabled, port: 502 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.19 , installed 7.7.19 Adapter "awtrix-light" : 3.0.0 , installed 3.0.0 Adapter "backitup" : 3.3.10 , installed 3.3.10 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daikin" : 1.5.1 , installed 1.5.1 Adapter "daikin-cloud" : 0.4.12 , installed 0.4.12 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "ecovacs-deebot": 1.4.15 , installed 1.4.15 Adapter "energiefluss-erweitert": 0.8.1, installed 0.8.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "homekit-controller": 0.5.11, installed 0.5.11 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "javascript" : 9.0.11 , installed 9.0.11 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "lg-thinq" : 1.1.3 , installed 1.1.3 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "mqtt-client" : 3.0.0 , installed 3.0.0 Adapter "myenergi" : 0.0.3 , installed 0.0.3 Adapter "openhab" : 1.2.0 , installed 1.2.0 Adapter "shelly" : 10.4.1 , installed 10.4.1 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "sun2000" : 2.3.5 , installed 2.3.5 Adapter "tesla-motors" : 1.3.2 , installed 1.3.2 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "vis-2" : 2.13.4 , installed 2.13.8 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 3.1.5 , installed 3.1.5 Adapter "zigbee2mqtt" : 3.0.9 , installed 3.0.9 Objects and States Please stand by - This may take a while Objects: 6444 States: 5058 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bookworm InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bookworm InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:38713 0.0.0.0:* LISTEN 112 7895 1261/homebridge: ho tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 1001 11993 2134/node tcp 0 0 127.0.0.1:42175 0.0.0.0:* LISTEN 112 8001 1241/homebridge: ho tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 114 7397 770/mosquitto tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 11907 1988/io.shelly.0 tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 12592 1995/io.mqtt.0 tcp 0 0 127.0.0.1:34053 0.0.0.0:* LISTEN 112 7913 1248/homebridge: @0 tcp 0 0 127.0.0.1:42345 0.0.0.0:* LISTEN 112 8650 1240/homebridge: ho tcp 0 0 127.0.0.1:38275 0.0.0.0:* LISTEN 112 7997 1279/homebridge: ho tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 1979 762/cupsd tcp 0 0 127.0.0.1:45787 0.0.0.0:* LISTEN 112 7902 1247/homebridge: ho tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 8426 991/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 9438 991/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 5880 775/sshd: /usr/sbin tcp 0 0 127.0.0.1:45135 0.0.0.0:* LISTEN 112 9653 1259/homebridge: ho tcp 0 0 127.0.0.1:37043 0.0.0.0:* LISTEN 112 8660 1267/homebridge: ho tcp6 0 0 ::1:631 :::* LISTEN 0 1978 762/cupsd tcp6 0 0 :::52403 :::* LISTEN 112 9624 1247/homebridge: ho tcp6 0 0 :::44253 :::* LISTEN 112 7858 1267/homebridge: ho tcp6 0 0 :::8081 :::* LISTEN 1001 9997 1464/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 19110 3344/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 7168 878/influxd tcp6 0 0 :::32570 :::* LISTEN 112 10548 1261/homebridge: ho tcp6 0 0 :::1883 :::* LISTEN 114 7398 770/mosquitto tcp6 0 0 :::8581 :::* LISTEN 112 10450 1108/hb-service tcp6 0 0 :::37356 :::* LISTEN 112 8572 1248/homebridge: @0 tcp6 0 0 :::53299 :::* LISTEN 112 7931 1259/homebridge: ho tcp6 0 0 :::22 :::* LISTEN 0 5882 775/sshd: /usr/sbin tcp6 0 0 :::3000 :::* LISTEN 113 8468 990/grafana tcp6 0 0 :::52120 :::* LISTEN 112 9612 1279/homebridge: ho tcp6 0 0 :::47961 :::* LISTEN 112 7846 1240/homebridge: ho tcp6 0 0 :::39667 :::* LISTEN 112 10537 1241/homebridge: ho tcp6 0 0 :::51798 :::* LISTEN 112 7831 1206/homebridge udp 0 0 0.0.0.0:5353 0.0.0.0:* 112 7868 1241/homebridge: ho udp 0 0 0.0.0.0:5353 0.0.0.0:* 112 10447 1108/hb-service udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 5759 593/avahi-daemon: r udp 0 0 0.0.0.0:57147 0.0.0.0:* 104 5761 593/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 14474 1766/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 14481 1766/io.tuya.0 udp6 0 0 :::5353 :::* 104 5760 593/avahi-daemon: r udp6 0 0 :::52580 :::* 104 5762 593/avahi-daemon: r udp6 0 0 fe80::81a3:20c2:583:546 :::* 0 7484 704/NetworkManager *** Log File - Last 25 Lines ***============ Mark until here for C&P =============
iob diag has finished.
Das System ist stabil, ein Dist-Upgrade geht also nach obiger Anleitung.
-
@marcelinho ich würde dir empfehlen vor dem Upgrade ein komplettes Image deiner SD-Karte/SSD/..., was auch immer du nutzt, zu erstellen. Ich verwende dazu unter Windows den Win32 Disk Imager. Wenn etwas komplett daneben gehen sollte, kannst du das Image wiederherstellen.
-
@marcelinho ich würde dir empfehlen vor dem Upgrade ein komplettes Image deiner SD-Karte/SSD/..., was auch immer du nutzt, zu erstellen. Ich verwende dazu unter Windows den Win32 Disk Imager. Wenn etwas komplett daneben gehen sollte, kannst du das Image wiederherstellen.
@hoschi2007 sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Ich verwende dazu unter Windows den Win32 Disk Imager.
-
H Homoran hat dieses Thema am aufgespalten
-
Frohes neues zusammen.
Hatte jemand bei einem Upgrade PI5 ohne IOB installation schonmal diese Fehlermeldung und/oder weiss was zu tun ist:
Nach Ausführen von:
sudo apt full-upgradekommt irgendwann dass:
dpkg: libfm-extra4:arm64: dependency problems, but removing anyway as you requested: libfm-modules:arm64 depends on libfm-extra4 (>= 1.2.0). (Reading database ... 158179 files and directories currently installed.) Removing libfm-extra4:arm64 (1.3.2-1+rpt18) ... Selecting previously unselected package libfm-extra4t64:arm64. (Reading database ... 158172 files and directories currently installed.) Preparing to unpack .../libfm-extra4t64_1.4.0-2+rpt8_arm64.deb ... Unpacking libfm-extra4t64:arm64 (1.4.0-2+rpt8) ... Preparing to unpack .../libfm-modules_1.4.0-2+rpt8_arm64.deb ... Unpacking libfm-modules:arm64 (1.4.0-2+rpt8) over (1.3.2-1+rpt18) ... Preparing to unpack .../lxpanel-data_0.11.1-1_all.deb ... Unpacking lxpanel-data (0.11.1-1) over (0.10.1-2+rpt22) ... Preparing to unpack .../wireless-tools_30~pre9-18+b1_arm64.deb ... Unpacking wireless-tools (30~pre9-18+b1) over (30~pre9-14) ... dpkg: libiw30:arm64: dependency problems, but removing anyway as you requested: lxpanel depends on libiw30 (>= 30~pre1). (Reading database ... 158152 files and directories currently installed.) Removing libiw30:arm64 (30~pre9-14) ... Selecting previously unselected package libiw30t64:arm64. (Reading database ... 158148 files and directories currently installed.) Preparing to unpack .../libiw30t64_30~pre9-18+b1_arm64.deb ... Adding 'diversion of /lib/aarch64-linux-gnu/libiw.so.30 to /lib/aarch64-linux-gnu/libiw.so.30.usr-is-merged by libiw30t64' Unpacking libiw30t64:arm64 (30~pre9-18+b1) ... Preparing to unpack .../lxpanel_0.11.1-1_arm64.deb ... Unpacking lxpanel (0.11.1-1) over (0.10.1-2+rpt22) ... dpkg: error processing archive /var/cache/apt/archives/lxpanel_0.11.1-1_arm64.deb (--unpack): trying to overwrite '/usr/lib/aarch64-linux-gnu/lxpanel/plugins/batt.so', which is also in package lxplug-batt (0.23) Errors were encountered while processing: /var/cache/apt/archives/lxpanel_0.11.1-1_arm64.deb /usr/bin/gdbus: symbol lookup error: /usr/bin/gdbus: undefined symbol: g_string_free_and_steal E: Sub-process /usr/bin/dpkg returned an error code (1)Bitte keine Fragen per PN, die gehören ins Forum!
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
-
Frohes neues zusammen.
Hatte jemand bei einem Upgrade PI5 ohne IOB installation schonmal diese Fehlermeldung und/oder weiss was zu tun ist:
Nach Ausführen von:
sudo apt full-upgradekommt irgendwann dass:
dpkg: libfm-extra4:arm64: dependency problems, but removing anyway as you requested: libfm-modules:arm64 depends on libfm-extra4 (>= 1.2.0). (Reading database ... 158179 files and directories currently installed.) Removing libfm-extra4:arm64 (1.3.2-1+rpt18) ... Selecting previously unselected package libfm-extra4t64:arm64. (Reading database ... 158172 files and directories currently installed.) Preparing to unpack .../libfm-extra4t64_1.4.0-2+rpt8_arm64.deb ... Unpacking libfm-extra4t64:arm64 (1.4.0-2+rpt8) ... Preparing to unpack .../libfm-modules_1.4.0-2+rpt8_arm64.deb ... Unpacking libfm-modules:arm64 (1.4.0-2+rpt8) over (1.3.2-1+rpt18) ... Preparing to unpack .../lxpanel-data_0.11.1-1_all.deb ... Unpacking lxpanel-data (0.11.1-1) over (0.10.1-2+rpt22) ... Preparing to unpack .../wireless-tools_30~pre9-18+b1_arm64.deb ... Unpacking wireless-tools (30~pre9-18+b1) over (30~pre9-14) ... dpkg: libiw30:arm64: dependency problems, but removing anyway as you requested: lxpanel depends on libiw30 (>= 30~pre1). (Reading database ... 158152 files and directories currently installed.) Removing libiw30:arm64 (30~pre9-14) ... Selecting previously unselected package libiw30t64:arm64. (Reading database ... 158148 files and directories currently installed.) Preparing to unpack .../libiw30t64_30~pre9-18+b1_arm64.deb ... Adding 'diversion of /lib/aarch64-linux-gnu/libiw.so.30 to /lib/aarch64-linux-gnu/libiw.so.30.usr-is-merged by libiw30t64' Unpacking libiw30t64:arm64 (30~pre9-18+b1) ... Preparing to unpack .../lxpanel_0.11.1-1_arm64.deb ... Unpacking lxpanel (0.11.1-1) over (0.10.1-2+rpt22) ... dpkg: error processing archive /var/cache/apt/archives/lxpanel_0.11.1-1_arm64.deb (--unpack): trying to overwrite '/usr/lib/aarch64-linux-gnu/lxpanel/plugins/batt.so', which is also in package lxplug-batt (0.23) Errors were encountered while processing: /var/cache/apt/archives/lxpanel_0.11.1-1_arm64.deb /usr/bin/gdbus: symbol lookup error: /usr/bin/gdbus: undefined symbol: g_string_free_and_steal E: Sub-process /usr/bin/dpkg returned an error code (1)sudo apt update sudo apt upgradesagt? Die Meldungen kämen nicht auf einem System OHNE installierten Desktop...
-
Hallo Thomas!
Vielen vielen Dank für die tolle Anleitung hier.
Zusammen mit dem Kurs von Matthias @haus-automatisierung
hatte ich Zuversicht alles sauber hochzuheben.Vielen Vielen Dank auch dafür an dieser Stelle von mir.
Weiter mit der tollen Arbeit. :-)
Support us
700
Online32.6k
Benutzer82.2k
Themen1.3m
Beiträge