Zigbee.0: You need save and run adapter before pairing!

Homoran

@nilli sagte in Zigbee.0: You need save and run adapter before pairing!:

@homoran said in Zigbee.0: You need save and run adapter before pairing!:

was für ein chip ist im Koordinator verbaut?

SLZB-07p7 basierend auf CC2652P7 und CP2102N.

@Asgothian
wird der Chip unterstützt?

Hintergrund:
@pmayer sagte in IEEE bei cod.m Zigbee Koordinator ändern:

unser Entwickler hat sich mal durch die Sourcen der Z-Stack Firmware und cc2538-bsl gegraben.
Wie es aussieht wird beim Update die IEEE im CC2652P7 an die falsche stelle geschrieben, weil das Speicherlayout anders ist als beim CC1352P7.

nilli

@homoran

/dev/ttyUSB0 -> gleiches Verhalten :confounded:

wird der Chip unterstützt? -> Ja, letzte Woche funktionierte er.

Homoran

@nilli sagte in Zigbee.0: You need save and run adapter before pairing!:

letzte Woche funktionierte er.

Aah!
mit welchen Einstellungen?

Was hast du dann geändert?

nilli

@homoran

Keine Änderung. Ein Neustart war der Auslöser ...

Homoran

@nilli sagte in Zigbee.0: You need save and run adapter before pairing!:

Ein Neustart war der Auslöser ...

@homoran sagte in Zigbee.0: You need save and run adapter before pairing!:

nur diese Angabe kann sich nach einem Neustart ändern.

Neustart wovon?
Nur Instanz oder ganzer Raspi?
hast du mal den Stick stromlos gemacht?

nilli

@homoran
Neustart des ganzen Raspberry.
Stick habe ich heute schon mehrfach ein und ausgesteckt.
Habe heute auch erfolgreich ein Update des Sticks gemacht über
https://smlight.tech/flasher/#SLZB-07p7

Asgothian

@nilli das letzte was mir einfällt hatte ich weiter oben schon geschrieben.

Auffällig ist das Fehlen jeglicher Fehlermeldungen seitens des Adapters - das ist unüblich.

Deswegen ist ein Update auf eine 2.0.x version zu empfehlen - da habe ich den exakten Quelltext hier.

A.

pmayer

@homoran sagte in Zigbee.0: You need save and run adapter before pairing!:

@Asgothian
wird der Chip unterstützt?

Der CC2652P7 funktioniert ohne Problem mit dem zigbee-herdsman. Oder hab ich dich falsch verstanden wo die Frage hinzielte?

Thomas Braun

@nilli

Der Link 'by-id' ist immer zu bevorzugen, der ändert sich nämlich nicht.

Du kannst auch mal in der zigbee-Sektion von

iob diag --unmask

schauen, was da eingestellt ist.

Homoran

@pmayer sagte in Zigbee.0: You need save and run adapter before pairing!:

Oder hab ich dich falsch verstanden

leider ja :cry:

es ging um den

@nilli sagte in Zigbee.0: You need save and run adapter before pairing!:

SLZB-07p7

nilli

@thomas-braun

leider nichts auffälliges ...

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-SMLIGHT_SMLIGHT_SLZB-07p7_9c66d41ef372ed1189a81df3fdf7b791-if00-port0

*** ZigBee Settings ***

Your zigbee.0 COM-Port is matching 'by-id'. Very good!
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.0
Extended Pan ID:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory
Pan ID:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory
/home/iobroker/.diag.sh: line 699: printf: 0x: invalid hex number
0
Channel:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory
Network Key:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory

Adapter State
+ system.adapter.zigbee.0                 : zigbee                : raspi5                                   -  enabled, port: /dev/serial/by-id/usb-SMLIGHT_SMLIGHT_SLZB-07p7_9c66d41ef372ed1189a81df3fdf7b791-if00-port0

Enabled adapters with bindings
+ system.adapter.zigbee.0                 : zigbee                : raspi5                                   -  enabled, port: /dev/serial/by-id/usb-SMLIGHT_SMLIGHT_SLZB-07p7_9c66d41ef372ed1189a81df3fdf7b791-if00-port0

```bash
Script v.2025-02-23

*** BASE SYSTEM ***
 Static hostname: raspi5
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.74+rpt-rpi-2712
    Architecture: arm64
OS is similar to: 

Model		: Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 19:16:26 up 1 day, 11:01,  2 users,  load average: 113.00, 112.51, 111.72
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Wed 2025-03-19 19:16:27 CET
           Universal time: Wed 2025-03-19 18:16:27 UTC
                 RTC time: Wed 2025-03-19 18:16:27
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
nils
HOME=/home/nils
GROUPS=nils adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop: 	
Terminal: 	tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            2.1G        1.5G        163M        425K        557M        651M
Swap:           536M        536M        573K
Total:          2.6G        2.0G        163M

Active iob-Instances: 	22

         2009 M total memory
         1387 M used memory
          754 M active memory
          838 M inactive memory
          155 M free memory
           87 M buffer memory
          443 M swap cache
          511 M total swap
          511 M used swap
            0 M free swap

*** top - Table Of Processes  ***
top - 19:16:27 up 1 day, 11:01,  2 users,  load average: 113.00, 112.51, 111.72
Tasks: 293 total,   1 running, 292 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni, 66.7 id, 33.3 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   2009.0 total,    155.0 free,   1387.7 used,    531.4 buff/cache     
MiB Swap:    512.0 total,      0.5 free,    511.4 used.    621.3 avail Mem 

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
15 CRITICAL ERRORS DETECTED! 
Check 'sudo dmesg --level=emerg,alert,crit -T' for details

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  967M     0  967M   0% /dev
tmpfs          tmpfs     201M  5.2M  196M   3% /run
/dev/mmcblk0p2 ext4       59G  9.7G   46G  18% /
tmpfs          tmpfs    1005M     0 1005M   0% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   55M  456M  11% /boot/firmware
tmpfs          tmpfs     201M     0  201M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Mar 18 08:14:35 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave  smsc95xx.macaddr=2C:CF:67:7A:6F:0D vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=a7b4f037-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Tue Mar 18 08:14:38 2025] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none.
[Tue Mar 18 08:14:39 2025] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.1G	/var/
206M	/var/cache
200M	/var/cache/apt
174M	/var/lib
135M	/var/lib/apt/lists

Archived and active journals take up 133.0M in the file system.

/opt/iobroker/backups:
19M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.4G	/opt/iobroker/iobroker-data/
1.3G	/opt/iobroker/iobroker-data/files
617M	/opt/iobroker/iobroker-data/files/javascript.admin
560M	/opt/iobroker/iobroker-data/files/javascript.admin/static
558M	/opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
38M	/opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
26M	/opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M	/opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M	/opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
24M	/opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-SMLIGHT_SMLIGHT_SLZB-07p7_9c66d41ef372ed1189a81df3fdf7b791-if00-port0

*** ZigBee Settings ***

Your zigbee.0 COM-Port is matching 'by-id'. Very good!
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.0
Extended Pan ID:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory
Pan ID:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory
/home/iobroker/.diag.sh: line 699: printf: 0x: invalid hex number
0
Channel:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory
Network Key:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs 	v20.19.0
/usr/bin/node 		v20.19.0
/usr/bin/npm 		10.8.2
/usr/bin/npx 		10.8.2
/usr/bin/corepack 	0.31.0

nodejs:
  Installed: 20.19.0-1nodesource1
  Candidate: 20.19.0-1nodesource1
  Version table:
 *** 20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
raspi5              raspi5 (version: 7.0.6, hostname: raspi5        , alive, uptime: 114649)

Core adapters versions
js-controller: 	7.0.6
admin: 		7.4.10
javascript: 	8.8.3

nodejs modules from github: 	0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspi5                                   -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspi5                                   -  enabled
  system.adapter.cloud.0                  : cloud                 : raspi5                                   - disabled
+ system.adapter.discovery.0              : discovery             : raspi5                                   -  enabled
+ system.adapter.echarts.0                : echarts               : raspi5                                   -  enabled
+ system.adapter.email.0                  : email                 : raspi5                                   -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : raspi5                                   -  enabled
+ system.adapter.history.0                : history               : raspi5                                   -  enabled
  system.adapter.iot.0                    : iot                   : raspi5                                   - disabled
+ system.adapter.iqontrol.0               : iqontrol              : raspi5                                   -  enabled
+ system.adapter.jarvis.0                 : jarvis                : raspi5                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.javascript.0             : javascript            : raspi5                                   -  enabled
+ system.adapter.maxcube.0                : maxcube               : raspi5                                   -  enabled, port: 62910, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : raspi5                                   -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.notification-manager.0   : notification-manager  : raspi5                                   -  enabled
  system.adapter.ping.0                   : ping                  : raspi5                                   - disabled
+ system.adapter.rpi2.0                   : rpi2                  : raspi5                                   -  enabled
+ system.adapter.scenes.0                 : scenes                : raspi5                                   -  enabled
+ system.adapter.signal-cmb.0             : signal-cmb            : raspi5                                   -  enabled
+ system.adapter.sql.0                    : sql                   : raspi5                                   -  enabled
+ system.adapter.tr-064.0                 : tr-064                : raspi5                                   -  enabled
+ system.adapter.vis-2.0                  : vis-2                 : raspi5                                   -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : raspi5                                   - disabled
+ system.adapter.web.0                    : web                   : raspi5                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspi5                                   -  enabled, port: /dev/serial/by-id/usb-SMLIGHT_SMLIGHT_SLZB-07p7_9c66d41ef372ed1189a81df3fdf7b791-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspi5                                   -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.jarvis.0                 : jarvis                : raspi5                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.maxcube.0                : maxcube               : raspi5                                   -  enabled, port: 62910, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : raspi5                                   -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspi5                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspi5                                   -  enabled, port: /dev/serial/by-id/usb-SMLIGHT_SMLIGHT_SLZB-07p7_9c66d41ef372ed1189a81df3fdf7b791-if00-port0

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ true         │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.4.10   , installed 7.4.10
Adapter    "backitup"     : 3.0.31   , installed 3.0.31
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "email"        : 1.3.1    , installed 1.3.1
Adapter    "fritzdect"    : 2.5.11   , installed 2.5.11
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "iqontrol"     : 3.0.0    , installed 3.0.0
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "maxcube"      : 1.0.4    , installed 1.0.4
Adapter    "node-red"     : 5.2.1    , installed 5.2.1
Adapter    "notification-manager": 1.2.1, installed 1.2.1
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "rpi2"         : 2.3.1    , installed 2.3.1
Adapter    "scenes"       : 3.2.3    , installed 3.2.3
Adapter    "signal-cmb"   : 0.3.0    , installed 0.3.0
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "sql"          : 3.0.1    , installed 3.0.1
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "vis-2"        : 2.9.64   , installed 2.9.64
Adapter    "weatherunderground": 3.7.0, installed 3.7.0
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "zigbee"       : 1.10.14  , installed 1.10.14

Objects and States
Please stand by - This may take a while
Objects: 	1841
States: 	937

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Hit:6 https://packages.adoptium.net/artifactory/deb bookworm InRelease
Reading package lists...
Pending Updates: 12

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          4944       675/sshd: /usr/sbin 
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       88612      21571/iobroker.js-c 
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       88607      21571/iobroker.js-c 
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1001       90865      22057/io.jarvis.0   
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      1001       90518      21746/node-red      
tcp6       0      0 :::22                   :::*                    LISTEN      0          4946       675/sshd: /usr/sbin 
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       87450      21591/io.admin.0    
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       89048      21978/io.web.0      
udp        0      0 192.168.2.87:5353       0.0.0.0:*                           1001       87961      22014/io.tr-064.0   
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        4799       541/avahi-daemon: r 
udp        0      0 0.0.0.0:39307           0.0.0.0:*                           104        4801       541/avahi-daemon: r 
udp6       0      0 :::5353                 :::*                                104        4800       541/avahi-daemon: r 
udp6       0      0 fe80::cfaa:2ac1:4ed:546 :::*                                0          372348     618/NetworkManager  
udp6       0      0 :::41901                :::*                                104        4802       541/avahi-daemon: r 

*** Log File - Last 25 Lines ***

2025-03-19 19:15:51.328  - debug: fritzdect.0 (22085) polling! fritzdect is alive with 300 s
2025-03-19 19:15:51.329  - debug: fritzdect.0 (22085) __________________________
2025-03-19 19:15:51.329  - debug: fritzdect.0 (22085) updating Devices / Groups 
2025-03-19 19:15:53.097  - debug: fritzdect.0 (22085) devices

2025-03-19 19:15:53.097  - debug: fritzdect.0 (22085) [{"identifier":"08761 0147624","id":"16","functionbitmask":"35456","fwversion":"04.27","manufacturer":"AVM","productname":"FRITZ!Smart Energy 200","present":"0","txbusy":"0","name":"FRITZ!DECT 200 #1","switch":{"state":"","mode":"","lock":"","devicelock":""},"simpleonoff":{"state":""},"powermeter":{"voltage":"","power":"","energy":""}}]
2025-03-19 19:15:53.097  - debug: fritzdect.0 (22085) update Devices 1
2025-03-19 19:15:53.097  - debug: fritzdect.0 (22085) _____________________________________________
2025-03-19 19:15:53.097  - debug: fritzdect.0 (22085) updating Device FRITZ!DECT 200 #1
2025-03-19 19:15:53.101  - silly: fritzdect.0 (22085) States user redis pmessage fritzdect.0.*/fritzdect.0.DECT_087610147624.present:{"val":false,"ack":true,"ts":1742408153100,"q":0,"from":"system.adapter.fritzdect.0","user":"system.user.admin","lc":1739294859072}
2025-03-19 19:15:53.101  - debug: fritzdect.0 (22085) onStateChange => state fritzdect.0.DECT_087610147624.present changed: false (ack = true)
2025-03-19 19:15:53.101  - debug: fritzdect.0 (22085) DECT_087610147624 is not present, check the device connection, no values are written
2025-03-19 19:15:53.102  - debug: fritzdect.0 (22085) groups

2025-03-19 19:15:53.102  - debug: fritzdect.0 (22085) []
2025-03-19 19:15:53.102  - debug: fritzdect.0 (22085) __________________________
2025-03-19 19:15:53.102  - debug: fritzdect.0 (22085) updating Routines 
2025-03-19 19:15:55.346  - debug: fritzdect.0 (22085) __________________________
2025-03-19 19:15:55.346  - debug: fritzdect.0 (22085) routines

2025-03-19 19:15:55.346  - debug: fritzdect.0 (22085) []
2025-03-19 19:15:55.348  - debug: fritzdect.0 (22085) glob state ["087610147624"]
2025-03-19 19:15:55.348  - debug: fritzdect.0 (22085) updating Stats of device 087610147624
2025-03-19 19:15:55.348  - debug: fritzdect.0 (22085) update Stats objects 087610147624
2025-03-19 19:15:56.368  - debug: fritzdect.0 (22085) With 087610147624got the following to parse{"devicestats":{"voltage":"","power":"","energy":""}}

nilli

@asgothian said in Zigbee.0: You need save and run adapter before pairing!:

Deswegen ist ein Update auf eine 2.0.x version zu empfehlen - da habe ich den exakten Quelltext hier.

Würde ich gerne versuchen, leider bin ich noch etwas unerfahren.
Wie gehe ich zur Installation vor ? Gibt es irgendwo eine Anleitung ?

Danke !!

Thomas Braun

@nilli sagte in Zigbee.0: You need save and run adapter before pairing!:

*** DMESG CRITICAL ERRORS ***
15 CRITICAL ERRORS DETECTED!

Was sind denn das für Errors?

nilli

@thomas-braun

Ich habe gestern versucht nach https://stmxcsr.com/micro/raspberry-signal-client.html signal-cli zu compelieren, bin aber leider krachend gescheitert :anguished:

nils@raspi5:~ $ sudo dmesg --level=emerg,alert,crit -T
[Tue Mar 18 08:14:41 2025] Unable to handle kernel paging request at virtual address ffffc00080aa3f04
[Tue Mar 18 08:14:41 2025] Mem abort info:
[Tue Mar 18 08:14:41 2025]   ESR = 0x0000000096000047
[Tue Mar 18 08:14:41 2025]   EC = 0x25: DABT (current EL), IL = 32 bits
[Tue Mar 18 08:14:41 2025]   SET = 0, FnV = 0
[Tue Mar 18 08:14:41 2025]   EA = 0, S1PTW = 0
[Tue Mar 18 08:14:41 2025]   FSC = 0x07: level 3 translation fault
[Tue Mar 18 08:14:41 2025] Data abort info:
[Tue Mar 18 08:14:41 2025]   ISV = 0, ISS = 0x00000047, ISS2 = 0x00000000
[Tue Mar 18 08:14:41 2025]   CM = 0, WnR = 1, TnD = 0, TagAccess = 0
[Tue Mar 18 08:14:41 2025]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[Tue Mar 18 08:14:41 2025] swapper pgtable: 16k pages, 47-bit VAs, pgdp=0000000001398000
[Tue Mar 18 08:14:41 2025] [ffffc00080aa3f04] pgd=100000000619c003, p4d=100000000619c003, pud=100000000619c003, pmd=10000000061a0003, pte=0000000000000000
[Tue Mar 18 08:14:41 2025] Internal error: Oops: 0000000096000047 [#1] PREEMPT SMP
[Tue Mar 18 08:14:41 2025] Code: d503201f b50000e2 14000020 38401423 (39000003)

nilli

Kann mir jemand einen Tip geben wie ich

https://github.com/asgothian/ioBroker.zigbee/tarball/2.1.0

installiere ? Danke !

Asgothian

@nilli

Adapter anhalten (Wichtig!!!)
Adapter Seite aufrufen
Experten modus aktivieren (1)
Installation mit der 'Katze' (2)
Benutzerdefiniert auswählen
Link hinein kopieren
Installieren

A.
Nachtrag: Ich hatte einen Link auf den Post zum Testen der 2.0.x Version gegeben - da stand auch drin von wo die 'standard' 2.0.x zu installieren sind - diese sind im Latest verfügbar.
Ich hoffe Du hast diesen Post gelesen.

arteck

@nilli sagte in Zigbee.0: You need save and run adapter before pairing!:

Kann mir jemand einen Tip geben wie ich

https://github.com/asgothian/ioBroker.zigbee/tarball/2.1.0

installiere ? Danke !

https://github.com/ioBroker/ioBroker.zigbee/wiki/GIT-install

nilli

@arteck

Super ! Danke :-) Wenn man weiss wie es geht ganz einfach.

Adapter 2.0.4 installiert und konfiguriert.
Leider immer noch kein Erfolg ...

2025-03-19 21:43:52.019 - info: host.raspi5 iobroker exit 0
2025-03-19 21:43:53.877 - info: admin.0 (21591) ==> Connected system.user.admin from ::ffff:192.168.2.66
2025-03-19 21:43:54.259 - info: host.raspi5 instance system.adapter.zigbee.1 in version "2.0.4" (non-npm: asgothian/ioBroker.zigbee#2.1.0) started with pid 112722
2025-03-19 21:43:55.356 - info: zigbee.1 (112722) starting. Version 2.0.4 (non-npm: asgothian/ioBroker.zigbee#2.1.0) in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.0, js-controller: 7.0.6
2025-03-19 21:43:55.365 - info: zigbee.1 (112722) init localConfig
2025-03-19 21:43:55.368 - error: zigbee.1 (112722) Serial port not selected! Go to settings page.
2025-03-19 21:43:55.369 - info: zigbee.1 (112722) --> transmitPower : normal
2025-03-19 21:43:55.371 - info: zigbee.1 (112722) --- creating device debug ---

2025-03-19 21:47:34.730 - info: host.raspi5 stopInstance system.adapter.zigbee.1 (force=false, process=true)
2025-03-19 21:47:34.733 - info: zigbee.1 (112722) Got terminate signal TERMINATE_YOURSELF
2025-03-19 21:47:34.734 - info: zigbee.1 (112722) cleaned everything up...
2025-03-19 21:47:34.735 - info: zigbee.1 (112722) local config saved
2025-03-19 21:47:34.737 - info: zigbee.1 (112722) Saved local configuration data
2025-03-19 21:47:34.738 - info: zigbee.1 (112722) terminating
2025-03-19 21:47:34.739 - info: zigbee.1 (112722) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-03-19 21:47:34.743 - error: zigbee.1 (112722) Failed to open the network: TypeError: Cannot read properties of undefined (reading 'permitJoin')
at Controller.permitJoin (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:263:35)
at ZigbeeController.permitJoin (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:690:33)
at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:664:24)
at process.processTicksAndRejections (node:internal/process/task_queues:95:5)
at async Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:1070:17)
2025-03-19 21:47:34.744 - warn: zigbee.1 (112722) Failed to stop zigbee during startup
2025-03-19 21:47:34.744 - info: zigbee.1 (112722) terminating
2025-03-19 21:47:35.241 - info: zigbee.1 (112722) terminating
2025-03-19 21:47:35.269 - info: host.raspi5 instance system.adapter.zigbee.1 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-03-19 21:47:38.427 - info: host.raspi5 instance system.adapter.zigbee.1 in version "2.0.4" (non-npm: asgothian/ioBroker.zigbee#2.1.0) started with pid 112848
2025-03-19 21:47:39.389 - info: zigbee.1 (112848) starting. Version 2.0.4 (non-npm: asgothian/ioBroker.zigbee#2.1.0) in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.0, js-controller: 7.0.6
2025-03-19 21:47:39.398 - info: zigbee.1 (112848) init localConfig
2025-03-19 21:47:39.401 - info: zigbee.1 (112848) --> transmitPower : normal
2025-03-19 21:47:39.403 - info: zigbee.1 (112848) --- creating device debug ---

Asgothian

@nilli hast du versucht das zigbee-subsystem direkt aus dem Admin-Interface zu starten, wie das im Post beschrieben ist, oder hast du einfach nur den Haken bei ‘automatisch starten’ gesetzt ?

A.

nilli

@asgothian

'start the Network automaticly' ist in den Instanzeneinstellungen nicht gesetzt.

Ich habe den Adapter im 'instanzen' Menue gestartet.

2025-03-19 22:08:47.638 - info: admin.0 (21591) ==> Connected system.user.admin from ::ffff:192.168.2.66
2025-03-19 22:08:50.036 - info: admin.0 (21591) <== Disconnect system.user.admin from ::ffff:192.168.2.66
2025-03-19 22:08:52.842 - info: host.raspi5 "system.adapter.zigbee.1" enabled
2025-03-19 22:08:53.076 - info: host.raspi5 instance system.adapter.zigbee.1 in version "2.0.4" (non-npm: asgothian/ioBroker.zigbee#2.1.0) started with pid 113695
2025-03-19 22:08:54.050 - info: zigbee.1 (113695) starting. Version 2.0.4 (non-npm: asgothian/ioBroker.zigbee#2.1.0) in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.0, js-controller: 7.0.6
2025-03-19 22:08:54.060 - info: zigbee.1 (113695) init localConfig
2025-03-19 22:08:54.063 - info: zigbee.1 (113695) --> transmitPower : normal
2025-03-19 22:08:54.066 - info: zigbee.1 (113695) --- creating device debug ---

Community Forum

NEWS

Zigbee.0: You need save and run adapter before pairing!

Support us

277

32.4k

81.4k

1.3m