Zigbee.0: You need save and run adapter before pairing!

nilli

@homoran

Keine Änderung. Ein Neustart war der Auslöser ...

Homoran

@nilli sagte in Zigbee.0: You need save and run adapter before pairing!:

Ein Neustart war der Auslöser ...

@homoran sagte in Zigbee.0: You need save and run adapter before pairing!:

nur diese Angabe kann sich nach einem Neustart ändern.

Neustart wovon?
Nur Instanz oder ganzer Raspi?
hast du mal den Stick stromlos gemacht?

nilli

@homoran
Neustart des ganzen Raspberry.
Stick habe ich heute schon mehrfach ein und ausgesteckt.
Habe heute auch erfolgreich ein Update des Sticks gemacht über
https://smlight.tech/flasher/#SLZB-07p7

Asgothian

@nilli das letzte was mir einfällt hatte ich weiter oben schon geschrieben.

Auffällig ist das Fehlen jeglicher Fehlermeldungen seitens des Adapters - das ist unüblich.

Deswegen ist ein Update auf eine 2.0.x version zu empfehlen - da habe ich den exakten Quelltext hier.

A.

pmayer

@homoran sagte in Zigbee.0: You need save and run adapter before pairing!:

@Asgothian
wird der Chip unterstützt?

Der CC2652P7 funktioniert ohne Problem mit dem zigbee-herdsman. Oder hab ich dich falsch verstanden wo die Frage hinzielte?

Thomas Braun

@nilli

Der Link 'by-id' ist immer zu bevorzugen, der ändert sich nämlich nicht.

Du kannst auch mal in der zigbee-Sektion von

iob diag --unmask

schauen, was da eingestellt ist.

Homoran

@pmayer sagte in Zigbee.0: You need save and run adapter before pairing!:

Oder hab ich dich falsch verstanden

leider ja

es ging um den

@nilli sagte in Zigbee.0: You need save and run adapter before pairing!:

SLZB-07p7

nilli

@thomas-braun

leider nichts auffälliges ...

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-SMLIGHT_SMLIGHT_SLZB-07p7_9c66d41ef372ed1189a81df3fdf7b791-if00-port0

*** ZigBee Settings ***

Your zigbee.0 COM-Port is matching 'by-id'. Very good!
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.0
Extended Pan ID:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory
Pan ID:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory
/home/iobroker/.diag.sh: line 699: printf: 0x: invalid hex number
0
Channel:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory
Network Key:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory

Adapter State
+ system.adapter.zigbee.0                 : zigbee                : raspi5                                   -  enabled, port: /dev/serial/by-id/usb-SMLIGHT_SMLIGHT_SLZB-07p7_9c66d41ef372ed1189a81df3fdf7b791-if00-port0

Enabled adapters with bindings
+ system.adapter.zigbee.0                 : zigbee                : raspi5                                   -  enabled, port: /dev/serial/by-id/usb-SMLIGHT_SMLIGHT_SLZB-07p7_9c66d41ef372ed1189a81df3fdf7b791-if00-port0

```bash
Script v.2025-02-23

*** BASE SYSTEM ***
 Static hostname: raspi5
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.74+rpt-rpi-2712
    Architecture: arm64
OS is similar to: 

Model		: Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 19:16:26 up 1 day, 11:01,  2 users,  load average: 113.00, 112.51, 111.72
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Wed 2025-03-19 19:16:27 CET
           Universal time: Wed 2025-03-19 18:16:27 UTC
                 RTC time: Wed 2025-03-19 18:16:27
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
nils
HOME=/home/nils
GROUPS=nils adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop: 	
Terminal: 	tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            2.1G        1.5G        163M        425K        557M        651M
Swap:           536M        536M        573K
Total:          2.6G        2.0G        163M

Active iob-Instances: 	22

         2009 M total memory
         1387 M used memory
          754 M active memory
          838 M inactive memory
          155 M free memory
           87 M buffer memory
          443 M swap cache
          511 M total swap
          511 M used swap
            0 M free swap

*** top - Table Of Processes  ***
top - 19:16:27 up 1 day, 11:01,  2 users,  load average: 113.00, 112.51, 111.72
Tasks: 293 total,   1 running, 292 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni, 66.7 id, 33.3 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   2009.0 total,    155.0 free,   1387.7 used,    531.4 buff/cache     
MiB Swap:    512.0 total,      0.5 free,    511.4 used.    621.3 avail Mem 

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
15 CRITICAL ERRORS DETECTED! 
Check 'sudo dmesg --level=emerg,alert,crit -T' for details

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  967M     0  967M   0% /dev
tmpfs          tmpfs     201M  5.2M  196M   3% /run
/dev/mmcblk0p2 ext4       59G  9.7G   46G  18% /
tmpfs          tmpfs    1005M     0 1005M   0% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   55M  456M  11% /boot/firmware
tmpfs          tmpfs     201M     0  201M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Mar 18 08:14:35 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave  smsc95xx.macaddr=2C:CF:67:7A:6F:0D vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=a7b4f037-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Tue Mar 18 08:14:38 2025] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none.
[Tue Mar 18 08:14:39 2025] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.1G	/var/
206M	/var/cache
200M	/var/cache/apt
174M	/var/lib
135M	/var/lib/apt/lists

Archived and active journals take up 133.0M in the file system.

/opt/iobroker/backups:
19M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.4G	/opt/iobroker/iobroker-data/
1.3G	/opt/iobroker/iobroker-data/files
617M	/opt/iobroker/iobroker-data/files/javascript.admin
560M	/opt/iobroker/iobroker-data/files/javascript.admin/static
558M	/opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
38M	/opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
26M	/opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M	/opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M	/opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
24M	/opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-SMLIGHT_SMLIGHT_SLZB-07p7_9c66d41ef372ed1189a81df3fdf7b791-if00-port0

*** ZigBee Settings ***

Your zigbee.0 COM-Port is matching 'by-id'. Very good!
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.0
Extended Pan ID:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory
Pan ID:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory
/home/iobroker/.diag.sh: line 699: printf: 0x: invalid hex number
0
Channel:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory
Network Key:
grep: /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json: No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs 	v20.19.0
/usr/bin/node 		v20.19.0
/usr/bin/npm 		10.8.2
/usr/bin/npx 		10.8.2
/usr/bin/corepack 	0.31.0

nodejs:
  Installed: 20.19.0-1nodesource1
  Candidate: 20.19.0-1nodesource1
  Version table:
 *** 20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
raspi5              raspi5 (version: 7.0.6, hostname: raspi5        , alive, uptime: 114649)

Core adapters versions
js-controller: 	7.0.6
admin: 		7.4.10
javascript: 	8.8.3

nodejs modules from github: 	0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspi5                                   -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspi5                                   -  enabled
  system.adapter.cloud.0                  : cloud                 : raspi5                                   - disabled
+ system.adapter.discovery.0              : discovery             : raspi5                                   -  enabled
+ system.adapter.echarts.0                : echarts               : raspi5                                   -  enabled
+ system.adapter.email.0                  : email                 : raspi5                                   -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : raspi5                                   -  enabled
+ system.adapter.history.0                : history               : raspi5                                   -  enabled
  system.adapter.iot.0                    : iot                   : raspi5                                   - disabled
+ system.adapter.iqontrol.0               : iqontrol              : raspi5                                   -  enabled
+ system.adapter.jarvis.0                 : jarvis                : raspi5                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.javascript.0             : javascript            : raspi5                                   -  enabled
+ system.adapter.maxcube.0                : maxcube               : raspi5                                   -  enabled, port: 62910, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : raspi5                                   -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.notification-manager.0   : notification-manager  : raspi5                                   -  enabled
  system.adapter.ping.0                   : ping                  : raspi5                                   - disabled
+ system.adapter.rpi2.0                   : rpi2                  : raspi5                                   -  enabled
+ system.adapter.scenes.0                 : scenes                : raspi5                                   -  enabled
+ system.adapter.signal-cmb.0             : signal-cmb            : raspi5                                   -  enabled
+ system.adapter.sql.0                    : sql                   : raspi5                                   -  enabled
+ system.adapter.tr-064.0                 : tr-064                : raspi5                                   -  enabled
+ system.adapter.vis-2.0                  : vis-2                 : raspi5                                   -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : raspi5                                   - disabled
+ system.adapter.web.0                    : web                   : raspi5                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspi5                                   -  enabled, port: /dev/serial/by-id/usb-SMLIGHT_SMLIGHT_SLZB-07p7_9c66d41ef372ed1189a81df3fdf7b791-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspi5                                   -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.jarvis.0                 : jarvis                : raspi5                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.maxcube.0                : maxcube               : raspi5                                   -  enabled, port: 62910, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : raspi5                                   -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspi5                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspi5                                   -  enabled, port: /dev/serial/by-id/usb-SMLIGHT_SMLIGHT_SLZB-07p7_9c66d41ef372ed1189a81df3fdf7b791-if00-port0

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ true         │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.4.10   , installed 7.4.10
Adapter    "backitup"     : 3.0.31   , installed 3.0.31
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "email"        : 1.3.1    , installed 1.3.1
Adapter    "fritzdect"    : 2.5.11   , installed 2.5.11
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "iqontrol"     : 3.0.0    , installed 3.0.0
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "maxcube"      : 1.0.4    , installed 1.0.4
Adapter    "node-red"     : 5.2.1    , installed 5.2.1
Adapter    "notification-manager": 1.2.1, installed 1.2.1
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "rpi2"         : 2.3.1    , installed 2.3.1
Adapter    "scenes"       : 3.2.3    , installed 3.2.3
Adapter    "signal-cmb"   : 0.3.0    , installed 0.3.0
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "sql"          : 3.0.1    , installed 3.0.1
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "vis-2"        : 2.9.64   , installed 2.9.64
Adapter    "weatherunderground": 3.7.0, installed 3.7.0
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "zigbee"       : 1.10.14  , installed 1.10.14

Objects and States
Please stand by - This may take a while
Objects: 	1841
States: 	937

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Hit:6 https://packages.adoptium.net/artifactory/deb bookworm InRelease
Reading package lists...
Pending Updates: 12

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          4944       675/sshd: /usr/sbin 
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       88612      21571/iobroker.js-c 
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       88607      21571/iobroker.js-c 
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN      1001       90865      22057/io.jarvis.0   
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      1001       90518      21746/node-red      
tcp6       0      0 :::22                   :::*                    LISTEN      0          4946       675/sshd: /usr/sbin 
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       87450      21591/io.admin.0    
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       89048      21978/io.web.0      
udp        0      0 192.168.2.87:5353       0.0.0.0:*                           1001       87961      22014/io.tr-064.0   
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        4799       541/avahi-daemon: r 
udp        0      0 0.0.0.0:39307           0.0.0.0:*                           104        4801       541/avahi-daemon: r 
udp6       0      0 :::5353                 :::*                                104        4800       541/avahi-daemon: r 
udp6       0      0 fe80::cfaa:2ac1:4ed:546 :::*                                0          372348     618/NetworkManager  
udp6       0      0 :::41901                :::*                                104        4802       541/avahi-daemon: r 

*** Log File - Last 25 Lines ***

2025-03-19 19:15:51.328  - debug: fritzdect.0 (22085) polling! fritzdect is alive with 300 s
2025-03-19 19:15:51.329  - debug: fritzdect.0 (22085) __________________________
2025-03-19 19:15:51.329  - debug: fritzdect.0 (22085) updating Devices / Groups 
2025-03-19 19:15:53.097  - debug: fritzdect.0 (22085) devices

2025-03-19 19:15:53.097  - debug: fritzdect.0 (22085) [{"identifier":"08761 0147624","id":"16","functionbitmask":"35456","fwversion":"04.27","manufacturer":"AVM","productname":"FRITZ!Smart Energy 200","present":"0","txbusy":"0","name":"FRITZ!DECT 200 #1","switch":{"state":"","mode":"","lock":"","devicelock":""},"simpleonoff":{"state":""},"powermeter":{"voltage":"","power":"","energy":""}}]
2025-03-19 19:15:53.097  - debug: fritzdect.0 (22085) update Devices 1
2025-03-19 19:15:53.097  - debug: fritzdect.0 (22085) _____________________________________________
2025-03-19 19:15:53.097  - debug: fritzdect.0 (22085) updating Device FRITZ!DECT 200 #1
2025-03-19 19:15:53.101  - silly: fritzdect.0 (22085) States user redis pmessage fritzdect.0.*/fritzdect.0.DECT_087610147624.present:{"val":false,"ack":true,"ts":1742408153100,"q":0,"from":"system.adapter.fritzdect.0","user":"system.user.admin","lc":1739294859072}
2025-03-19 19:15:53.101  - debug: fritzdect.0 (22085) onStateChange => state fritzdect.0.DECT_087610147624.present changed: false (ack = true)
2025-03-19 19:15:53.101  - debug: fritzdect.0 (22085) DECT_087610147624 is not present, check the device connection, no values are written
2025-03-19 19:15:53.102  - debug: fritzdect.0 (22085) groups

2025-03-19 19:15:53.102  - debug: fritzdect.0 (22085) []
2025-03-19 19:15:53.102  - debug: fritzdect.0 (22085) __________________________
2025-03-19 19:15:53.102  - debug: fritzdect.0 (22085) updating Routines 
2025-03-19 19:15:55.346  - debug: fritzdect.0 (22085) __________________________
2025-03-19 19:15:55.346  - debug: fritzdect.0 (22085) routines

2025-03-19 19:15:55.346  - debug: fritzdect.0 (22085) []
2025-03-19 19:15:55.348  - debug: fritzdect.0 (22085) glob state ["087610147624"]
2025-03-19 19:15:55.348  - debug: fritzdect.0 (22085) updating Stats of device 087610147624
2025-03-19 19:15:55.348  - debug: fritzdect.0 (22085) update Stats objects 087610147624
2025-03-19 19:15:56.368  - debug: fritzdect.0 (22085) With 087610147624got the following to parse{"devicestats":{"voltage":"","power":"","energy":""}}

nilli

@asgothian said in Zigbee.0: You need save and run adapter before pairing!:

Deswegen ist ein Update auf eine 2.0.x version zu empfehlen - da habe ich den exakten Quelltext hier.

Würde ich gerne versuchen, leider bin ich noch etwas unerfahren.
Wie gehe ich zur Installation vor ? Gibt es irgendwo eine Anleitung ?

Danke !!

Thomas Braun

@nilli sagte in Zigbee.0: You need save and run adapter before pairing!:

*** DMESG CRITICAL ERRORS ***
15 CRITICAL ERRORS DETECTED!

Was sind denn das für Errors?

nilli

@thomas-braun

Ich habe gestern versucht nach https://stmxcsr.com/micro/raspberry-signal-client.html signal-cli zu compelieren, bin aber leider krachend gescheitert

nils@raspi5:~ $ sudo dmesg --level=emerg,alert,crit -T
[Tue Mar 18 08:14:41 2025] Unable to handle kernel paging request at virtual address ffffc00080aa3f04
[Tue Mar 18 08:14:41 2025] Mem abort info:
[Tue Mar 18 08:14:41 2025]   ESR = 0x0000000096000047
[Tue Mar 18 08:14:41 2025]   EC = 0x25: DABT (current EL), IL = 32 bits
[Tue Mar 18 08:14:41 2025]   SET = 0, FnV = 0
[Tue Mar 18 08:14:41 2025]   EA = 0, S1PTW = 0
[Tue Mar 18 08:14:41 2025]   FSC = 0x07: level 3 translation fault
[Tue Mar 18 08:14:41 2025] Data abort info:
[Tue Mar 18 08:14:41 2025]   ISV = 0, ISS = 0x00000047, ISS2 = 0x00000000
[Tue Mar 18 08:14:41 2025]   CM = 0, WnR = 1, TnD = 0, TagAccess = 0
[Tue Mar 18 08:14:41 2025]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[Tue Mar 18 08:14:41 2025] swapper pgtable: 16k pages, 47-bit VAs, pgdp=0000000001398000
[Tue Mar 18 08:14:41 2025] [ffffc00080aa3f04] pgd=100000000619c003, p4d=100000000619c003, pud=100000000619c003, pmd=10000000061a0003, pte=0000000000000000
[Tue Mar 18 08:14:41 2025] Internal error: Oops: 0000000096000047 [#1] PREEMPT SMP
[Tue Mar 18 08:14:41 2025] Code: d503201f b50000e2 14000020 38401423 (39000003)

nilli

Kann mir jemand einen Tip geben wie ich

https://github.com/asgothian/ioBroker.zigbee/tarball/2.1.0

installiere ? Danke !

Asgothian

@nilli

Adapter anhalten (Wichtig!!!)
Adapter Seite aufrufen
Experten modus aktivieren (1)
Installation mit der 'Katze' (2)
Benutzerdefiniert auswählen
Link hinein kopieren
Installieren

A.
Nachtrag: Ich hatte einen Link auf den Post zum Testen der 2.0.x Version gegeben - da stand auch drin von wo die 'standard' 2.0.x zu installieren sind - diese sind im Latest verfügbar.
Ich hoffe Du hast diesen Post gelesen.

arteck

@nilli sagte in Zigbee.0: You need save and run adapter before pairing!:

Kann mir jemand einen Tip geben wie ich

https://github.com/asgothian/ioBroker.zigbee/tarball/2.1.0

installiere ? Danke !

https://github.com/ioBroker/ioBroker.zigbee/wiki/GIT-install

nilli

@arteck

Super ! Danke Wenn man weiss wie es geht ganz einfach.

Adapter 2.0.4 installiert und konfiguriert.
Leider immer noch kein Erfolg ...

2025-03-19 21:43:52.019 - info: host.raspi5 iobroker exit 0
2025-03-19 21:43:53.877 - info: admin.0 (21591) ==> Connected system.user.admin from ::ffff:192.168.2.66
2025-03-19 21:43:54.259 - info: host.raspi5 instance system.adapter.zigbee.1 in version "2.0.4" (non-npm: asgothian/ioBroker.zigbee#2.1.0) started with pid 112722
2025-03-19 21:43:55.356 - info: zigbee.1 (112722) starting. Version 2.0.4 (non-npm: asgothian/ioBroker.zigbee#2.1.0) in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.0, js-controller: 7.0.6
2025-03-19 21:43:55.365 - info: zigbee.1 (112722) init localConfig
2025-03-19 21:43:55.368 - error: zigbee.1 (112722) Serial port not selected! Go to settings page.
2025-03-19 21:43:55.369 - info: zigbee.1 (112722) --> transmitPower : normal
2025-03-19 21:43:55.371 - info: zigbee.1 (112722) --- creating device debug ---

2025-03-19 21:47:34.730 - info: host.raspi5 stopInstance system.adapter.zigbee.1 (force=false, process=true)
2025-03-19 21:47:34.733 - info: zigbee.1 (112722) Got terminate signal TERMINATE_YOURSELF
2025-03-19 21:47:34.734 - info: zigbee.1 (112722) cleaned everything up...
2025-03-19 21:47:34.735 - info: zigbee.1 (112722) local config saved
2025-03-19 21:47:34.737 - info: zigbee.1 (112722) Saved local configuration data
2025-03-19 21:47:34.738 - info: zigbee.1 (112722) terminating
2025-03-19 21:47:34.739 - info: zigbee.1 (112722) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-03-19 21:47:34.743 - error: zigbee.1 (112722) Failed to open the network: TypeError: Cannot read properties of undefined (reading 'permitJoin')
at Controller.permitJoin (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:263:35)
at ZigbeeController.permitJoin (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:690:33)
at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:664:24)
at process.processTicksAndRejections (node:internal/process/task_queues:95:5)
at async Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:1070:17)
2025-03-19 21:47:34.744 - warn: zigbee.1 (112722) Failed to stop zigbee during startup
2025-03-19 21:47:34.744 - info: zigbee.1 (112722) terminating
2025-03-19 21:47:35.241 - info: zigbee.1 (112722) terminating
2025-03-19 21:47:35.269 - info: host.raspi5 instance system.adapter.zigbee.1 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-03-19 21:47:38.427 - info: host.raspi5 instance system.adapter.zigbee.1 in version "2.0.4" (non-npm: asgothian/ioBroker.zigbee#2.1.0) started with pid 112848
2025-03-19 21:47:39.389 - info: zigbee.1 (112848) starting. Version 2.0.4 (non-npm: asgothian/ioBroker.zigbee#2.1.0) in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.0, js-controller: 7.0.6
2025-03-19 21:47:39.398 - info: zigbee.1 (112848) init localConfig
2025-03-19 21:47:39.401 - info: zigbee.1 (112848) --> transmitPower : normal
2025-03-19 21:47:39.403 - info: zigbee.1 (112848) --- creating device debug ---

asgothian opened this pull request in asgothian/ioBroker.zigbee

closed 1.3.9dev #2

Asgothian

@nilli hast du versucht das zigbee-subsystem direkt aus dem Admin-Interface zu starten, wie das im Post beschrieben ist, oder hast du einfach nur den Haken bei ‘automatisch starten’ gesetzt ?

A.

nilli

@asgothian

'start the Network automaticly' ist in den Instanzeneinstellungen nicht gesetzt.

Ich habe den Adapter im 'instanzen' Menue gestartet.

2025-03-19 22:08:47.638 - info: admin.0 (21591) ==> Connected system.user.admin from ::ffff:192.168.2.66
2025-03-19 22:08:50.036 - info: admin.0 (21591) <== Disconnect system.user.admin from ::ffff:192.168.2.66
2025-03-19 22:08:52.842 - info: host.raspi5 "system.adapter.zigbee.1" enabled
2025-03-19 22:08:53.076 - info: host.raspi5 instance system.adapter.zigbee.1 in version "2.0.4" (non-npm: asgothian/ioBroker.zigbee#2.1.0) started with pid 113695
2025-03-19 22:08:54.050 - info: zigbee.1 (113695) starting. Version 2.0.4 (non-npm: asgothian/ioBroker.zigbee#2.1.0) in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.0, js-controller: 7.0.6
2025-03-19 22:08:54.060 - info: zigbee.1 (113695) init localConfig
2025-03-19 22:08:54.063 - info: zigbee.1 (113695) --> transmitPower : normal
2025-03-19 22:08:54.066 - info: zigbee.1 (113695) --- creating device debug ---

asgothian opened this pull request in asgothian/ioBroker.zigbee

closed 1.3.9dev #2

Asgothian

@nilli dann lies nochmal was ich oben geschrieben habe.

Eine wichtige Eigenschaft dieser Version ist das das zigbee subsystem nicht automatisch gestartet wird. Du kannst (und sollst) versuchen das subsystem aus dem Admin zu starten um a die Meldungen vom Start zu kommen. Wenn du das nicht machst bleibt der Adapter “gelb”

nilli

@asgothian

Danke für Deine Hilfe.
Ich habe den Start/Stop button in der Instanzeinstellung benutzt.
Ich hoffe das war, was Du meintest.

Asgothian

@nilli Das sieht besser aus, aber nicht gut - das USB Device wird vom Zigbee-Herdsman nicht sauber akzeptiert.

halte das Zigbee-Subsystem bitte wieder an (start/stop nochmal drücken) und setz dann den haken beim flow control. Danach noch einmal starten.

A.

NEWS