NEWS
IOBroker hängt sich nach Crash und Neuinstallation oft auf
ioBroker Allgemein
118
Beiträge
8
Kommentatoren
11.6k
Aufrufe
5
Watching
-
Hallo zusammen,
nach dem neulichen Crash meines IOBrokers, installiert auf Raspi 4B und der anschließenden Neuinstallation funktioniert einiges nicht mehr richtig. Das Starten von Jarvis und Javascript bringt den IOBroker bzw. den Raspi jedesmal zum Absturz bzw. Einfrieren. Wiedererwecken kann ich ihn jedesmal nur durch Strom aus. Natürlich blöd aber anders geht es nicht. Da es aber so auch nicht weitergehen kann, erhoffe ich mir mal wieder Hilfe von den Cracks.
Wäre super, wenn ich das Ding mit eurer Hilfe wieder richtig zum Laufen bekäme !Anbei ein iob diag:
======== Start marking the full check here =========Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi8-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 19:32:37 up 0 min, 4 users, load average: 2.08, 0.63, 0.22 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sun 2024-03-10 19:32:37 CET Universal time: Sun 2024-03-10 18:32:37 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** simon /home/simon simon adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 1.5G 1.6G 16M 991M 2.5G Swap: 104M 0B 104M Total: 4.1G 1.5G 1.7G 3793 M total memory 1423 M used memory 1577 M active memory 577 M inactive memory 1513 M free memory 37 M buffer memory 907 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.3M 379M 1% /run /dev/mmcblk0p2 ext4 117G 6.7G 105G 7% / tmpfs tmpfs 1.9G 148K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 380M 36K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Mar 10 19:31:39 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:0F:E4:E2 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ccc359c3-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [Sun Mar 10 19:31:42 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Mar 10 19:31:44 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 774M /var/ 285M /var/log 284M /var/log/journal/8ec53d3bc1c549d5b36274323c1b8255 284M /var/log/journal 195M /var/lib Archived and active journals take up 283.8M in the file system. /opt/iobroker/backups: 12M /opt/iobroker/backups/ 60K /opt/iobroker/backups/tmpJavis0 4.0K /opt/iobroker/backups/tmpJavis0/states /opt/iobroker/iobroker-data: 457M /opt/iobroker/iobroker-data/ 163M /opt/iobroker/iobroker-data/files 57M /opt/iobroker/iobroker-data/files/javascript.admin 46M /opt/iobroker/iobroker-data/backup-objects 38M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 241M /opt/iobroker/iobroker-data/objects.jsonl 22M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js 8.1M /opt/iobroker/iobroker-data/states.jsonl 7.0M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/675.d0c8b930.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4d856ba1ab6ed1196ded60ea8669f5d-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.1-1nodesource1 Candidate: 18.19.1-1nodesource1 Version table: *** 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled system.adapter.discovery.0 : discovery : iobroker - enabled + system.adapter.hmip.0 : hmip : iobroker - enabled system.adapter.iqontrol.0 : iqontrol : iobroker - enabled system.adapter.jarvis.0 : jarvis : iobroker - disabled system.adapter.javascript.0 : javascript : iobroker - disabled system.adapter.link.0 : link : iobroker - disabled system.adapter.midea.0 : midea : iobroker - enabled + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 192.168.178.96 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1883, bind: 192.168.178.96 system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - disabled system.adapter.vis.0 : vis : iobroker - disabled system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4d856ba1ab6ed1196ded60ea8669f5d-if00-port0 system.adapter.zigbee2mqtt.0 : zigbee2mqtt : iobroker - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 192.168.178.96 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1883, bind: 192.168.178.96 system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4d856ba1ab6ed1196ded60ea8669f5d-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"! Objects and States Please stand by - This may take a while Objects: 3979 States: 1 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 24 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16115 800/sshd: /usr/sbin tcp 1 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 26766 2584/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 26773 2584/iobroker.js-co tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 17488 772/cupsd tcp6 0 0 ::1:631 :::* LISTEN 0 17487 772/cupsd tcp6 0 0 :::22 :::* LISTEN 0 16117 800/sshd: /usr/sbin udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16359 1078/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 13011 553/avahi-daemon: r udp 0 0 0.0.0.0:44590 0.0.0.0:* 104 13013 553/avahi-daemon: r udp6 0 0 :::58315 :::* 104 13014 553/avahi-daemon: r udp6 0 0 :::5353 :::* 104 13012 553/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-03-10 19:34:37.673 - info: host.iobroker Copyright (c) 2014-2023 bluefox, 2014 hobbyquaker 2024-03-10 19:34:37.674 - info: host.iobroker hostname: iobroker, node: v18.19.1 2024-03-10 19:34:37.675 - info: host.iobroker ip addresses: 192.168.178.96 fe80::894:7c1f:7703:754a 192.168.178.116 fe80::faf9:9eff:7542:7f35 2024-03-10 19:34:53.974 - info: host.iobroker-Server Error inMem-objects listening on port 9001: Error: listen EADDRINUSE: address already in use 127.0.0.1:9001 2024-03-10 19:35:07.701 - error: host.iobroker No connection to databases possible, restart 2024-03-10 19:35:07.710 - info: host.iobroker iobroker _restart 2024-03-10 19:35:13.516 - info: host.iobroker iobroker.js-controller version 5.0.19 js-controller starting 2024-03-10 19:35:13.522 - info: host.iobroker Copyright (c) 2014-2023 bluefox, 2014 hobbyquaker 2024-03-10 19:35:13.523 - info: host.iobroker hostname: iobroker, node: v18.19.1 2024-03-10 19:35:13.524 - info: host.iobroker ip addresses: 192.168.178.96 fe80::894:7c1f:7703:754a 192.168.178.116 fe80::faf9:9eff:7542:7f35 2024-03-10 19:35:26.859 - info: host.iobroker connected to Objects and States 2024-03-10 19:35:26.909 - info: host.iobroker added notifications configuration of host 2024-03-10 19:35:27.577 - info: host.iobroker Delete state "system.host.iobroker.versions.nodeCurrent" 2024-03-10 19:35:27.579 - info: host.iobroker 17 instances found 2024-03-10 19:35:27.614 - info: host.iobroker starting 11 instances 2024-03-10 19:35:27.821 - info: host.iobroker instance system.adapter.admin.0 started with pid 3371 2024-03-10 19:35:27.848 - info: host.iobroker Delete state "system.host.iobroker.versions.nodeNewest" 2024-03-10 19:35:27.858 - info: host.iobroker Delete state "system.host.iobroker.versions.nodeNewestNext" 2024-03-10 19:35:27.867 - info: host.iobroker Delete state "system.host.iobroker.versions.npmCurrent" 2024-03-10 19:35:27.877 - info: host.iobroker Delete state "system.host.iobroker.versions.npmNewest" 2024-03-10 19:35:27.887 - info: host.iobroker Delete state "system.host.iobroker.versions.npmNewestNext" 2024-03-10 19:35:27.895 - info: host.iobroker Some obsolete host states deleted. 2024-03-10 19:35:31.722 - info: host.iobroker instance system.adapter.backitup.0 started with pid 3390 2024-03-10 19:35:31.921 - info: admin.0 (3371) starting. Version 6.13.16 in /opt/iobroker/node_modules/iobroker.admin, node: v18.19.1, js-controller: 5.0.19 2024-03-10 19:35:32.007 - info: admin.0 (3371) requesting all objects============ Mark until here for C&P =============
Copy text starting here:======================= SUMMARY ======================= v.2023-10-10 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi8-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 24 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 Recommended versions are nodejs and npm Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 4.0G 3.7G 140M 14M 206M 256M Swap: 104M 104M 0B Total: 4.1G 3.8G 140M Active iob-Instances: 12 Active repo(s): stable ioBroker Core: js-controller 5.0.19 admin 6.13.16 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 3979 States: 1 Size of iob-Database: 322M /opt/iobroker/iobroker-data/objects.jsonl 8.2M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ======================= Mark text until here for copying ===
hier
@greenhorn sagte in IOBroker hängt sich nach Crash und Neuinstallation oft auf:4.0G 1.5G 1.6G 16M 991M 2.5G
sieht's anders aus
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
hier
@greenhorn sagte in IOBroker hängt sich nach Crash und Neuinstallation oft auf:4.0G 1.5G 1.6G 16M 991M 2.5G
sieht's anders aus
@homoran ja, deswegen hab ich oben korrigiert
ich kann grad nichts mehr zitieren
@Greenhorn deine jsonl...mach mal iob fix
edit
auch mit einem anderen browser kann ich nichts zitieren zumindest nicht aus den "codetags" aus dem oberen/ersten
-
@homoran ja, deswegen hab ich oben korrigiert
ich kann grad nichts mehr zitieren
@Greenhorn deine jsonl...mach mal iob fix
edit
auch mit einem anderen browser kann ich nichts zitieren zumindest nicht aus den "codetags" aus dem oberen/ersten
@crunchip updates habe ich gerade gemacht.
iob fix bringt folgendes. Wie kann ich alle stoppen?simon@iobroker:~ $ iob fix
library: loaded
Library version=2024-01-04
ioBroker or some processes are still running:
io.admin.0
io.backitup.0
io.hmip.0
io.mqtt.0
io.shelly.0
io.sonoff.0
io.zigbee.0
io.discovery.0
io.iqontrol.0
io.midea.0
io.web.0
Please stop them first and try again! -
@crunchip updates habe ich gerade gemacht.
iob fix bringt folgendes. Wie kann ich alle stoppen?simon@iobroker:~ $ iob fix
library: loaded
Library version=2024-01-04
ioBroker or some processes are still running:
io.admin.0
io.backitup.0
io.hmip.0
io.mqtt.0
io.shelly.0
io.sonoff.0
io.zigbee.0
io.discovery.0
io.iqontrol.0
io.midea.0
io.web.0
Please stop them first and try again!iob stop iob fix iob startkein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
iob stop iob fix iob startGemacht...
simon@iobroker:~ $ iob fix library: loaded Library version=2024-01-04 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2024-01-04 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Done ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== simon@iobroker:~ $MOD-EDIT: Code in code-tags gesetzt!
-
iob stop iob fix iob start -
@crunchip sagte in IOBroker hängt sich nach Crash und Neuinstallation oft auf:
@homoran aber die 127.0.0.1 ist doch falsch, oder?
wo?
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
@greenhorn sagte in IOBroker hängt sich nach Crash und Neuinstallation oft auf:
Vor dem Crash lief alles einwandfrei, seitdem wurde nichts geändert.
du hast 2 Adapter auf gleichem Port
-
Hier ein neues iob diag
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi8-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 20:04:44 up 33 min, 4 users, load average: 3.18, 1.98, 1.30 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sun 2024-03-10 20:04:44 CET Universal time: Sun 2024-03-10 19:04:44 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** simon /home/simon simon adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 3.4G 489M 14M 265M 603M Swap: 104M 104M 249K Total: 4.1G 3.5G 489M 3793 M total memory 3217 M used memory 2880 M active memory 210 M inactive memory 466 M free memory 1 M buffer memory 252 M swap cache 99 M total swap 99 M used swap 0 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.3M 379M 1% /run /dev/mmcblk0p2 ext4 117G 6.6G 105G 6% / tmpfs tmpfs 1.9G 148K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 380M 36K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Mar 10 19:31:39 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:0F:E4:E2 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ccc359c3-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [Sun Mar 10 19:31:42 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Mar 10 19:31:44 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 774M /var/ 285M /var/log 284M /var/log/journal/8ec53d3bc1c549d5b36274323c1b8255 284M /var/log/journal 195M /var/lib Archived and active journals take up 283.8M in the file system. /opt/iobroker/backups: 12M /opt/iobroker/backups/ 60K /opt/iobroker/backups/tmpJavis0 4.0K /opt/iobroker/backups/tmpJavis0/states /opt/iobroker/iobroker-data: 333M /opt/iobroker/iobroker-data/ 163M /opt/iobroker/iobroker-data/files 57M /opt/iobroker/iobroker-data/files/javascript.admin 46M /opt/iobroker/iobroker-data/backup-objects 38M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 124M /opt/iobroker/iobroker-data/objects.jsonl 22M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js 7.0M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/675.d0c8b930.chunk.js.map 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4d856ba1ab6ed1196ded60ea8669f5d-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.1-1nodesource1 Candidate: 18.19.1-1nodesource1 Version table: *** 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled + system.adapter.hmip.0 : hmip : iobroker - enabled + system.adapter.iqontrol.0 : iqontrol : iobroker - enabled system.adapter.jarvis.0 : jarvis : iobroker - disabled system.adapter.javascript.0 : javascript : iobroker - disabled system.adapter.link.0 : link : iobroker - disabled + system.adapter.midea.0 : midea : iobroker - enabled + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 192.168.178.96 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1883, bind: 192.168.178.96 system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - disabled system.adapter.vis.0 : vis : iobroker - disabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4d856ba1ab6ed1196ded60ea8669f5d-if00-port0 system.adapter.zigbee2mqtt.0 : zigbee2mqtt : iobroker - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 192.168.178.96 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1883, bind: 192.168.178.96 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4d856ba1ab6ed1196ded60ea8669f5d-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "backitup" : 2.10.11 , installed 2.10.11 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "hmip" : 1.22.0 , installed 1.22.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 7.8.0 , installed 7.8.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "link" : 0.5.12 , installed 0.5.12 Adapter "midea" : 0.0.7 , installed 0.0.7 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "web" : 6.2.3 , installed 6.2.3 Adapter "ws" : 2.5.10 , installed 2.5.10 Adapter "zigbee" : 1.10.1 , installed 1.10.1 Adapter "zigbee2mqtt" : 2.13.4 , installed 2.13.4 Objects and States Please stand by - This may take a while Objects: 3979 States: 3262 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 51776 21179/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16115 800/sshd: /usr/sbin tcp 0 0 192.168.178.96:1883 0.0.0.0:* LISTEN 1001 53265 21197/io.sonoff.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 48757 21090/iobroker.js-c tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 52284 21090/iobroker.js-c tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 17488 772/cupsd tcp6 0 0 ::1:631 :::* LISTEN 0 17487 772/cupsd tcp6 0 0 :::8081 :::* LISTEN 1001 48847 21108/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 48907 21273/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 16117 800/sshd: /usr/sbin udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16359 1078/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 13011 553/avahi-daemon: r udp 0 0 0.0.0.0:44590 0.0.0.0:* 104 13013 553/avahi-daemon: r udp6 0 0 :::58315 :::* 104 13014 553/avahi-daemon: r udp6 0 0 :::5353 :::* 104 13012 553/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-03-10 20:04:12.912 - warn: zigbee.0 (21212) DeviceAvailability:Failed to ping 0xf0d1b8be2408284c B40 DIM T 2024-03-10 20:04:12.899 - info: shelly.0 (21179) [MQTT] Device with client id "shellypro1-30c6f781f3c8" connected! 2024-03-10 20:04:13.017 - warn: zigbee.0 (21212) DeviceAvailability:Failed to ping 0x001788010d3ec68f LWA024 2024-03-10 20:04:13.199 - warn: zigbee.0 (21212) DeviceAvailability:Failed to ping 0x001788010db790af LWU002 2024-03-10 20:04:13.326 - warn: zigbee.0 (21212) DeviceAvailability:Failed to ping 0x001788010d3fd6b1 LWA024 2024-03-10 20:04:19.152 - info: shelly.0 (21179) [MQTT] Client Close: (shellyplus1pm / shellyplus1pm-4855199d7590 / shellyplus1pm#4855199d7590#1) (false) 2024-03-10 20:04:20.066 - info: shelly.0 (21179) [MQTT] Device with client id "shellyplus1pm-b0b21c1b1e9c" connected! 2024-03-10 20:04:20.311 - info: shelly.0 (21179) [MQTT] Client Close: (shellyplus1pm / shellyplus1pm-b48a0a218644 / shellyplus1pm#b48a0a218644#1) (false) 2024-03-10 20:04:22.281 - info: shelly.0 (21179) [MQTT] Client Close: (shellyplus1pm / shellyplus1pm-b48a0a21c40c / shellyplus1pm#b48a0a21c40c#1) (false) 2024-03-10 20:04:22.339 - info: shelly.0 (21179) [MQTT] Client Close: (shellypro1 / shellypro1-30c6f781f3c8 / shellypro1#30c6f781f3c8#1) (false) 2024-03-10 20:04:24.067 - info: hmip.0 (21131) hmip adapter connected and ready 2024-03-10 20:04:24.889 - error: shelly.0 (21179) [MQTT] Unable to get mqttprefix of client with id "shellyplus1pm-b48a0a21c40c" 2024-03-10 20:04:24.937 - error: shelly.0 (21179) [MQTT] Unable to get mqttprefix of client with id "shellyplus1pm-4855199d7590" 2024-03-10 20:04:24.939 - error: shelly.0 (21179) [MQTT] Unable to get mqttprefix of client with id "shellyplus1pm-b48a0a218644" 2024-03-10 20:04:24.941 - error: shelly.0 (21179) [MQTT] Unable to get mqttprefix of client with id "shellypro1-30c6f781f3c8" 2024-03-10 20:05:16.854 - info: shelly.0 (21179) [MQTT] Device with client id "shellypro1-30c6f781f3c8" connected! 2024-03-10 20:05:17.119 - info: shelly.0 (21179) [MQTT] Device with client id "shellyplus1pm-4855199d7590" connected! 2024-03-10 20:05:19.052 - info: shelly.0 (21179) [MQTT] Device with client id "shellyplus1pm-b48a0a218644" connected! 2024-03-10 20:05:22.762 - info: shelly.0 (21179) [MQTT] Device with client id "shellyplus1pm-b48a0a21c40c" connected! 2024-03-10 20:05:26.887 - info: shelly.0 (21179) [MQTT] Client Close: 192.168.178.28 (shellypro1 / shellypro1-30c6f781f3c8 / shellypro1#30c6f781f3c8#1) (false) 2024-03-10 20:05:26.929 - error: shelly.0 (21179) [MQTT] Error in function setMqttPrefixHttp (Gen 1) for (undefined / undefined / undefined): TypeError: Cannot read properties of undefined (reading 'replace') 2024-03-10 20:05:26.929 - error: shelly.0 (21179) [MQTT] Unable to get mqttprefix of client with id "shellypro1-30c6f781f3c8" 2024-03-10 20:05:27.133 - info: shelly.0 (21179) [MQTT] Client Close: 192.168.178.150 (shellyplus1pm / shellyplus1pm-4855199d7590 / shellyplus1pm#4855199d7590#1) (false) 2024-03-10 20:05:27.216 - error: shelly.0 (21179) [MQTT] Error in function setMqttPrefixHttp (Gen 1) for (undefined / undefined / undefined): TypeError: Cannot read properties of undefined (reading 'replace') 2024-03-10 20:05:27.216 - error: shelly.0 (21179) [MQTT] Unable to get mqttprefix of client with id "shellyplus1pm-4855199d7590"======================= SUMMARY ======================= v.2023-10-10 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi8-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 Recommended versions are nodejs 18.19.1 and npm 10.2.4 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 4.0G 2.9G 596M 14M 621M 1.1G Swap: 104M 104M 356K Total: 4.1G 3.0G 596M Active iob-Instances: 12 Active repo(s): stable ioBroker Core: js-controller 5.0.19 admin 6.13.16 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 3979 States: 3262 Size of iob-Database: 124M /opt/iobroker/iobroker-data/objects.jsonl 1.4M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== -
@greenhorn sagte in IOBroker hängt sich nach Crash und Neuinstallation oft auf:
Vor dem Crash lief alles einwandfrei, seitdem wurde nichts geändert.
du hast 2 Adapter auf gleichem Port
-
@greenhorn dein mqtt und sonoff ist falsch
-
@greenhorn dein mqtt und sonoff ist falsch
-
@greenhorn das darf nicht, die müssen unterschiedlich sein
@Homoran kannst du mir sagen warum man aus dem diag nicht einzelne Zeilen markieren/ zitieren kann? da passt doch das Format nicht?
umgestiegen von Proxmox auf Unraid
-
@greenhorn das darf nicht, die müssen unterschiedlich sein
@Homoran kannst du mir sagen warum man aus dem diag nicht einzelne Zeilen markieren/ zitieren kann? da passt doch das Format nicht?
-
@greenhorn ja und du hast beide instanzen fest an die IP gebunden
du musst aber bedenken, deine sonoff Geräte musst du entsprechend anpassen, zwecks port
-
Hallo zusammen,
nach dem neulichen Crash meines IOBrokers, installiert auf Raspi 4B und der anschließenden Neuinstallation funktioniert einiges nicht mehr richtig. Das Starten von Jarvis und Javascript bringt den IOBroker bzw. den Raspi jedesmal zum Absturz bzw. Einfrieren. Wiedererwecken kann ich ihn jedesmal nur durch Strom aus. Natürlich blöd aber anders geht es nicht. Da es aber so auch nicht weitergehen kann, erhoffe ich mir mal wieder Hilfe von den Cracks.
Wäre super, wenn ich das Ding mit eurer Hilfe wieder richtig zum Laufen bekäme !Anbei ein iob diag:
======== Start marking the full check here =========Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi8-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 19:32:37 up 0 min, 4 users, load average: 2.08, 0.63, 0.22 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sun 2024-03-10 19:32:37 CET Universal time: Sun 2024-03-10 18:32:37 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** simon /home/simon simon adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 1.5G 1.6G 16M 991M 2.5G Swap: 104M 0B 104M Total: 4.1G 1.5G 1.7G 3793 M total memory 1423 M used memory 1577 M active memory 577 M inactive memory 1513 M free memory 37 M buffer memory 907 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.3M 379M 1% /run /dev/mmcblk0p2 ext4 117G 6.7G 105G 7% / tmpfs tmpfs 1.9G 148K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 74M 437M 15% /boot/firmware tmpfs tmpfs 380M 36K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Mar 10 19:31:39 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:0F:E4:E2 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=ccc359c3-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [Sun Mar 10 19:31:42 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Mar 10 19:31:44 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 774M /var/ 285M /var/log 284M /var/log/journal/8ec53d3bc1c549d5b36274323c1b8255 284M /var/log/journal 195M /var/lib Archived and active journals take up 283.8M in the file system. /opt/iobroker/backups: 12M /opt/iobroker/backups/ 60K /opt/iobroker/backups/tmpJavis0 4.0K /opt/iobroker/backups/tmpJavis0/states /opt/iobroker/iobroker-data: 457M /opt/iobroker/iobroker-data/ 163M /opt/iobroker/iobroker-data/files 57M /opt/iobroker/iobroker-data/files/javascript.admin 46M /opt/iobroker/iobroker-data/backup-objects 38M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 241M /opt/iobroker/iobroker-data/objects.jsonl 22M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js 8.1M /opt/iobroker/iobroker-data/states.jsonl 7.0M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/675.d0c8b930.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4d856ba1ab6ed1196ded60ea8669f5d-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.1-1nodesource1 Candidate: 18.19.1-1nodesource1 Version table: *** 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.8.0 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled system.adapter.discovery.0 : discovery : iobroker - enabled + system.adapter.hmip.0 : hmip : iobroker - enabled system.adapter.iqontrol.0 : iqontrol : iobroker - enabled system.adapter.jarvis.0 : jarvis : iobroker - disabled system.adapter.javascript.0 : javascript : iobroker - disabled system.adapter.link.0 : link : iobroker - disabled system.adapter.midea.0 : midea : iobroker - enabled + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 192.168.178.96 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1883, bind: 192.168.178.96 system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - disabled system.adapter.vis.0 : vis : iobroker - disabled system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4d856ba1ab6ed1196ded60ea8669f5d-if00-port0 system.adapter.zigbee2mqtt.0 : zigbee2mqtt : iobroker - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 192.168.178.96 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1883, bind: 192.168.178.96 system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4d856ba1ab6ed1196ded60ea8669f5d-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"! Objects and States Please stand by - This may take a while Objects: 3979 States: 1 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 24 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16115 800/sshd: /usr/sbin tcp 1 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 26766 2584/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 26773 2584/iobroker.js-co tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 17488 772/cupsd tcp6 0 0 ::1:631 :::* LISTEN 0 17487 772/cupsd tcp6 0 0 :::22 :::* LISTEN 0 16117 800/sshd: /usr/sbin udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16359 1078/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 13011 553/avahi-daemon: r udp 0 0 0.0.0.0:44590 0.0.0.0:* 104 13013 553/avahi-daemon: r udp6 0 0 :::58315 :::* 104 13014 553/avahi-daemon: r udp6 0 0 :::5353 :::* 104 13012 553/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-03-10 19:34:37.673 - info: host.iobroker Copyright (c) 2014-2023 bluefox, 2014 hobbyquaker 2024-03-10 19:34:37.674 - info: host.iobroker hostname: iobroker, node: v18.19.1 2024-03-10 19:34:37.675 - info: host.iobroker ip addresses: 192.168.178.96 fe80::894:7c1f:7703:754a 192.168.178.116 fe80::faf9:9eff:7542:7f35 2024-03-10 19:34:53.974 - info: host.iobroker-Server Error inMem-objects listening on port 9001: Error: listen EADDRINUSE: address already in use 127.0.0.1:9001 2024-03-10 19:35:07.701 - error: host.iobroker No connection to databases possible, restart 2024-03-10 19:35:07.710 - info: host.iobroker iobroker _restart 2024-03-10 19:35:13.516 - info: host.iobroker iobroker.js-controller version 5.0.19 js-controller starting 2024-03-10 19:35:13.522 - info: host.iobroker Copyright (c) 2014-2023 bluefox, 2014 hobbyquaker 2024-03-10 19:35:13.523 - info: host.iobroker hostname: iobroker, node: v18.19.1 2024-03-10 19:35:13.524 - info: host.iobroker ip addresses: 192.168.178.96 fe80::894:7c1f:7703:754a 192.168.178.116 fe80::faf9:9eff:7542:7f35 2024-03-10 19:35:26.859 - info: host.iobroker connected to Objects and States 2024-03-10 19:35:26.909 - info: host.iobroker added notifications configuration of host 2024-03-10 19:35:27.577 - info: host.iobroker Delete state "system.host.iobroker.versions.nodeCurrent" 2024-03-10 19:35:27.579 - info: host.iobroker 17 instances found 2024-03-10 19:35:27.614 - info: host.iobroker starting 11 instances 2024-03-10 19:35:27.821 - info: host.iobroker instance system.adapter.admin.0 started with pid 3371 2024-03-10 19:35:27.848 - info: host.iobroker Delete state "system.host.iobroker.versions.nodeNewest" 2024-03-10 19:35:27.858 - info: host.iobroker Delete state "system.host.iobroker.versions.nodeNewestNext" 2024-03-10 19:35:27.867 - info: host.iobroker Delete state "system.host.iobroker.versions.npmCurrent" 2024-03-10 19:35:27.877 - info: host.iobroker Delete state "system.host.iobroker.versions.npmNewest" 2024-03-10 19:35:27.887 - info: host.iobroker Delete state "system.host.iobroker.versions.npmNewestNext" 2024-03-10 19:35:27.895 - info: host.iobroker Some obsolete host states deleted. 2024-03-10 19:35:31.722 - info: host.iobroker instance system.adapter.backitup.0 started with pid 3390 2024-03-10 19:35:31.921 - info: admin.0 (3371) starting. Version 6.13.16 in /opt/iobroker/node_modules/iobroker.admin, node: v18.19.1, js-controller: 5.0.19 2024-03-10 19:35:32.007 - info: admin.0 (3371) requesting all objects============ Mark until here for C&P =============
Copy text starting here:======================= SUMMARY ======================= v.2023-10-10 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi8-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 24 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 Recommended versions are nodejs and npm Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 4.0G 3.7G 140M 14M 206M 256M Swap: 104M 104M 0B Total: 4.1G 3.8G 140M Active iob-Instances: 12 Active repo(s): stable ioBroker Core: js-controller 5.0.19 admin 6.13.16 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 3979 States: 1 Size of iob-Database: 322M /opt/iobroker/iobroker-data/objects.jsonl 8.2M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ======================= Mark text until here for copying ===
@greenhorn sagte in IOBroker hängt sich nach Crash und Neuinstallation oft auf:
anschließenden Neuinstallation
Warum nimmt man da nicht gleich die 'Lite'-Version, ohne z. B. einem laufenden Drucker-Server wie cupsd?
sudo systemctl set-default multi-user.targetSonoff und mqtt hast du auf den gleichen Port auf der gleichen IP laufen.
-
@greenhorn sagte in IOBroker hängt sich nach Crash und Neuinstallation oft auf:
anschließenden Neuinstallation
Warum nimmt man da nicht gleich die 'Lite'-Version, ohne z. B. einem laufenden Drucker-Server wie cupsd?
sudo systemctl set-default multi-user.targetSonoff und mqtt hast du auf den gleichen Port auf der gleichen IP laufen.
@thomas-braun Wie ändere ich das jetzt?
-
@greenhorn das darf nicht, die müssen unterschiedlich sein
@Homoran kannst du mir sagen warum man aus dem diag nicht einzelne Zeilen markieren/ zitieren kann? da passt doch das Format nicht?
@crunchip muss sich @jey-Cee nochmal ansehen.
er hatte was mit dem "alles markieren" optiiert, seitdem gibt es auf Android dieses Problem.
Ich fürchte fast, dass genau deswegen vor Jahren das "alles markieren" verändert worden warkein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
@homoran sagte in IOBroker hängt sich nach Crash und Neuinstallation oft auf:
seitdem gibt es auf Android dieses Problem
ich sitz allerdings am PC, aber ja, alles markieren geht, aber einzelne Zeilen beginnt es zu flackern
-
@thomas-braun Wie ändere ich das jetzt?
@greenhorn sagte in IOBroker hängt sich nach Crash und Neuinstallation oft auf:
Wie ändere ich das jetzt?
Man kann die Ports der mqtt-Broker ändern. Konkret beim sonoff? Keine Ahnung, hab den nicht im Einsatz.
698
Online32.6k
Benutzer82.2k
Themen1.3m
Beiträge