Kaco Blueplanet NX3 M2->RS485 TO POE ETH an Modbus Problem
-
@stronoff Haken bei Aliase raus. Speichern, Register kontrollieren/korrigieren, Speichern, log zeigen
Willst du mehrere Geräte über den BUS auslesen?
-
Ich hab den Haken bei "Mehrere Geräte IDs" entfernt.
v6.3.5 1818 Log-Größe: 261.0 KB Zeit Nachricht modbus.1 2023-03-12 10:05:05.625 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:05:05.624 debug Closing client on purpose. modbus.1 2023-03-12 10:05:04.629 debug Cleaning up request fifo. modbus.1 2023-03-12 10:05:04.629 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:05:04.628 debug Socket closed with error modbus.1 2023-03-12 10:05:04.626 warn Poll error count: 4 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:05:04.624 error Client in error state. modbus.1 2023-03-12 10:05:04.624 error Request timed out. modbus.1 2023-03-12 10:05:04.623 warn Error: undefined modbus.1 2023-03-12 10:04:59.621 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:04:59.621 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:04:59.620 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:03:59.618 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:03:59.617 debug Closing client on purpose. modbus.1 2023-03-12 10:03:58.621 debug Cleaning up request fifo. modbus.1 2023-03-12 10:03:58.621 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:03:58.621 debug Socket closed with error modbus.1 2023-03-12 10:03:58.618 warn Poll error count: 3 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:03:58.617 error Client in error state. modbus.1 2023-03-12 10:03:58.616 error Request timed out. modbus.1 2023-03-12 10:03:58.615 warn Error: undefined modbus.1 2023-03-12 10:03:53.614 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:03:53.614 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:03:53.612 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:02:53.610 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:02:53.609 debug Closing client on purpose. modbus.1 2023-03-12 10:02:52.614 debug Cleaning up request fifo. modbus.1 2023-03-12 10:02:52.613 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:02:52.613 debug Socket closed with error modbus.1 2023-03-12 10:02:52.610 warn Poll error count: 2 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:02:52.609 error Client in error state. modbus.1 2023-03-12 10:02:52.609 error Request timed out. modbus.1 2023-03-12 10:02:52.608 warn Error: undefined modbus.1 2023-03-12 10:02:47.606 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:02:47.606 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:02:47.605 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:01:47.601 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:01:47.600 debug Closing client on purpose. modbus.1 2023-03-12 10:01:46.605 debug Cleaning up request fifo. modbus.1 2023-03-12 10:01:46.604 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:01:46.604 debug Socket closed with error modbus.1 2023-03-12 10:01:46.601 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:01:46.599 error Client in error state. modbus.1 2023-03-12 10:01:46.599 error Request timed out. modbus.1 2023-03-12 10:01:46.598 warn Error: undefined modbus.1 2023-03-12 10:01:41.590 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:01:41.589 debug Initialization of scale factors done! modbus.1 2023-03-12 10:01:41.587 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:01:41.586 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:01:41.302 debug Initialize Objects for holdingRegs: [] modbus.1 2023-03-12 10:01:41.302 debug Add inputRegisters.40072_Amps: {"_id":"inputRegisters.40072_Amps","type":"state","common":{"name":"Amps","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"A"},"native":{"regType":"inputRegs","address":40072,"deviceId":3,"type":"uint16be","len":1,"offset":0,"factor":1}} modbus.1 2023-03-12 10:01:41.301 debug Initialize Objects for inputRegs: [{"_address":"40072","deviceId":3,"name":"Amps","description":"Amps","unit":"A","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":40072,"id":"inputRegisters.40072_Amps"}] modbus.1 2023-03-12 10:01:41.300 debug Initialize Objects for coils: [] modbus.1 2023-03-12 10:01:41.299 debug Initialize Objects for disInputs: [] modbus.1 2023-03-12 10:01:41.102 info starting. Version 5.0.11 in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.0, js-controller: 4.0.23 modbus.1 2023-03-12 10:01:40.683 debug Plugin sentry Initialize Plugin (enabled=true) modbus.1 2023-03-12 10:01:40.557 debug States connected to redis: 127.0.0.1:9000 modbus.1 2023-03-12 10:01:40.479 debug States create User PubSub Client modbus.1 2023-03-12 10:01:40.477 debug States create System PubSub Client modbus.1 2023-03-12 10:01:40.453 debug Redis States: Use Redis connection: 127.0.0.1:9000 modbus.1 2023-03-12 10:01:40.404 debug Objects connected to redis: 127.0.0.1:9001 modbus.1 2023-03-12 10:01:40.396 debug Objects client initialize lua scripts modbus.1 2023-03-12 10:01:40.319 debug Objects create User PubSub Client modbus.1 2023-03-12 10:01:40.317 debug Objects create System PubSub Client modbus.1 2023-03-12 10:01:40.314 debug Objects client ready ... initialize now modbus.1 2023-03-12 10:01:40.251 debug Redis Objects: Use Redis connection: 127.0.0.1:9001 modbus.1 2023-03-12 10:01:35.727 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason modbus.1 2023-03-12 10:01:35.727 debug Plugin sentry destroyed modbus.1 2023-03-12 10:01:35.725 info terminating modbus.1 2023-03-12 10:01:35.723 debug Closing client on purpose. modbus.1 2023-03-12 10:01:35.721 info Got terminate signal TERMINATE_YOURSELF modbus.1 2023-03-12 10:01:31.930 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:01:31.928 debug Closing client on purpose. modbus.1 2023-03-12 10:01:30.935 debug Cleaning up request fifo. modbus.1 2023-03-12 10:01:30.934 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:01:30.933 debug Socket closed with error modbus.1 2023-03-12 10:01:30.930 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:01:30.928 error Client in error state. modbus.1 2023-03-12 10:01:30.928 error Request timed out. modbus.1 2023-03-12 10:01:30.927 warn Error: undefined modbus.1 2023-03-12 10:01:25.919 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:01:25.919 debug Initialization of scale factors done! modbus.1 2023-03-12 10:01:25.917 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:01:25.915 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:01:25.649 debug Remove old object modbus.1.inputRegisters.3.40072_Amps modbus.1 2023-03-12 10:01:25.597 debug Initialize Objects for holdingRegs: [] modbus.1 2023-03-12 10:01:25.596 debug Add inputRegisters.40072_Amps: {"_id":"inputRegisters.40072_Amps","type":"state","common":{"name":"Amps","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"A"},"native":{"regType":"inputRegs","address":40072,"deviceId":3,"type":"uint16be","len":1,"offset":0,"factor":1}} modbus.1 2023-03-12 10:01:25.595 debug Initialize Objects for inputRegs: [{"_address":"40072","deviceId":3,"name":"Amps","description":"Amps","unit":"A","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":40072,"id":"inputRegisters.40072_Amps"}] modbus.1 2023-03-12 10:01:25.594 debug Initialize Objects for coils: [] modbus.1 2023-03-12 10:01:25.593 debug Initialize Objects for disInputs: [] modbus.1 2023-03-12 10:01:25.398 info starting. Version 5.0.11 in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.0, js-controller: 4.0.23 modbus.1 2023-03-12 10:01:24.970 debug Plugin sentry Initialize Plugin (enabled=true) modbus.1 2023-03-12 10:01:24.828 debug States connected to redis: 127.0.0.1:9000 modbus.1 2023-03-12 10:01:24.747 debug States create User PubSub Client modbus.1 2023-03-12 10:01:24.745 debug States create System PubSub Client modbus.1 2023-03-12 10:01:24.720 debug Redis States: Use Redis connection: 127.0.0.1:9000 modbus.1 2023-03-12 10:01:24.676 debug Objects connected to redis: 127.0.0.1:9001 modbus.1 2023-03-12 10:01:24.668 debug Objects client initialize lua scripts modbus.1 2023-03-12 10:01:24.578 debug Objects create User PubSub Client modbus.1 2023-03-12 10:01:24.577 debug Objects create System PubSub Client modbus.1 2023-03-12 10:01:24.574 debug Objects client ready ... initialize now modbus.1 2023-03-12 10:01:24.516 debug Redis Objects: Use Redis connection: 127.0.0.1:9001 modbus.1 2023-03-12 10:01:19.975 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason modbus.1 2023-03-12 10:01:19.975 debug Plugin sentry destroyed modbus.1 2023-03-12 10:01:19.973 info terminating modbus.1 2023-03-12 10:01:19.971 debug Closing client on purpose. modbus.1 2023-03-12 10:01:19.969 info Got terminate signal TERMINATE_YOURSELF modbus.1 2023-03-12 10:00:49.061 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:00:49.060 debug Closing client on purpose. modbus.1 2023-03-12 10:00:48.067 debug Cleaning up request fifo. modbus.1 2023-03-12 10:00:48.066 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:00:48.065 debug Socket closed with error modbus.1 2023-03-12 10:00:48.062 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:00:48.060 error Client in error state. modbus.1 2023-03-12 10:00:48.059 error Request timed out. modbus.1 2023-03-12 10:00:48.059 warn Error: undefined modbus.1 2023-03-12 10:00:43.051 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:00:43.051 debug Initialization of scale factors done! modbus.1 2023-03-12 10:00:43.048 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:00:43.047 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:00:42.756 debug Initialize Objects for holdingRegs: [] modbus.1 2023-03-12 10:00:42.756 debug Add inputRegisters.3.40072_Amps: {"_id":"inputRegisters.3.40072_Amps","type":"state","common":{"name":"Amps","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"A"},"native":{"regType":"inputRegs","address":40072,"deviceId":3,"type":"uint16be","len":1,"offset":0,"factor":1}} modbus.1 2023-03-12 10:00:42.754 debug Initialize Objects for inputRegs: [{"_address":"40072","deviceId":3,"name":"Amps","description":"Amps","unit":"A","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":40072,"id":"inputRegisters.3.40072_Amps"}] modbus.1 2023-03-12 10:00:42.754 debug Initialize Objects for coils: [] modbus.1 2023-03-12 10:00:42.753 debug Initialize Objects for disInputs: [] modbus.1 2023-03-12 10:00:42.564 info starting. Version 5.0.11 in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.0, js-controller: 4.0.23 modbus.1 2023-03-12 10:00:42.142 debug Plugin sentry Initialize Plugin (enabled=true) modbus.1 2023-03-12 10:00:42.018 debug States connected to redis: 127.0.0.1:9000 modbus.1 2023-03-12 10:00:41.937 debug States create User PubSub Client modbus.1 2023-03-12 10:00:41.934 debug States create System PubSub Client modbus.1 2023-03-12 10:00:41.911 debug Redis States: Use Redis connection: 127.0.0.1:9000 modbus.1 2023-03-12 10:00:41.867 debug Objects connected to redis: 127.0.0.1:9001 modbus.1 2023-03-12 10:00:41.859 debug Objects client initialize lua scripts modbus.1 2023-03-12 10:00:41.783 debug Objects create User PubSub Client modbus.1 2023-03-12 10:00:41.781 debug Objects create System PubSub Client modbus.1 2023-03-12 10:00:41.733 debug Objects client ready ... initialize now modbus.1 2023-03-12 10:00:41.674 debug Redis Objects: Use Redis connection: 127.0.0.1:9001 modbus.1 2023-03-12 10:00:37.089 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason modbus.1 2023-03-12 10:00:37.088 debug Plugin sentry destroyed modbus.1 2023-03-12 10:00:37.087 info terminating modbus.1 2023-03-12 10:00:37.083 debug Closing client on purpose. modbus.1 2023-03-12 10:00:37.080 info Got terminate signal TERMINATE_YOURSELF modbus.1 2023-03-12 10:00:19.692 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:00:19.690 debug Closing client on purpose. modbus.1 2023-03-12 10:00:18.701 debug Cleaning up request fifo. modbus.1 2023-03-12 10:00:18.700 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:00:18.699 debug Socket closed with error modbus.1 2023-03-12 10:00:18.694 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:00:18.691 error Client in error state. modbus.1 2023-03-12 10:00:18.690 error Request timed out. modbus.1 2023-03-12 10:00:18.689 warn Error: undefined modbus.1 2023-03-12 10:00:13.677 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:00:13.675 debug Initialization of scale factors done! modbus.1 2023-03-12 10:00:13.672 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:00:13.670 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:00:13.216 debug Remove old object modbus.1.inputRegisters.3.10071_Amps modbus.1 2023-03-12 10:00:13.144 debug Initialize Objects for holdingRegs: [] modbus.1 2023-03-12 10:00:13.143 debug Add inputRegisters.3.40072_Amps: {"_id":"inputRegisters.3.40072_Amps","type":"state","common":{"name":"Amps","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"A"},"native":{"regType":"inputRegs","address":40072,"deviceId":3,"type":"uint16be","len":1,"offset":0,"factor":1}} modbus.1 2023-03-12 10:00:13.141 debug Initialize Objects for inputRegs: [{"_address":"40072","deviceId":3,"name":"Amps","description":"Amps","unit":"A","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":40072,"id":"inputRegisters.3.40072_Amps"}] modbus.1 2023-03-12 10:00:13.140 debug Initialize Objects for coils: [] modbus.1 2023-03-12 10:00:13.135 debug Initialize Objects for disInputs: [] modbus.1 2023-03-12 10:00:12.801 info starting. Version 5.0.11 in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.0, js-controller: 4.0.23 modbus.1 2023-03-12 10:00:12.019 debug Plugin sentry Initialize Plugin (enabled=true) modbus.1 2023-03-12 10:00:11.851 debug States connected to redis: 127.0.0.1:9000 modbus.1 2023-03-12 10:00:11.726 debug States create User PubSub Client modbus.1 2023-03-12 10:00:11.717 debug States create System PubSub Client modbus.1 2023-03-12 10:00:11.682 debug Redis States: Use Redis connection: 127.0.0.1:9000 modbus.1 2023-03-12 10:00:11.615 debug Objects connected to redis: 127.0.0.1:9001 modbus.1 2023-03-12 10:00:11.598 debug Objects client initialize lua scripts modbus.1 2023-03-12 10:00:11.506 debug Objects create User PubSub Client modbus.1 2023-03-12 10:00:11.503 debug Objects create System PubSub Client modbus.1 2023-03-12 10:00:11.496 debug Objects client ready ... initialize now modbus.1 2023-03-12 10:00:11.365 debug Redis Objects: Use Redis connection: 127.0.0.1:9001 modbus.1 2023-03-12 10:00:06.092 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason modbus.1 2023-03-12 10:00:06.091 debug Plugin sentry destroyed modbus.1 2023-03-12 10:00:06.090 info terminating modbus.1 2023-03-12 10:00:06.086 debug Closing client on purpose. modbus.1 2023-03-12 10:00:06.084 info Got terminate signal TERMINATE_YOURSELF modbus.1 2023-03-12 09:59:50.034 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 09:59:50.032 debug Closing client on purpose. modbus.1 2023-03-12 09:59:49.039 debug Cleaning up request fifo. modbus.1 2023-03-12 09:59:49.038 debug Clearing timeout of the current request. modbus.1 2023-03-12 09:59:49.037 debug Socket closed with error modbus.1 2023-03-12 09:59:49.034 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 09:59:49.033 error Client in error state. modbus.1 2023-03-12 09:59:49.032 error Request timed out. modbus.1 2023-03-12 09:59:49.031 warn Error: undefined modbus.1 2023-03-12 09:59:44.023 debug [DevID_3/inputRegs] Poll address 10071 - 1 registers modbus.1 2023-03-12 09:59:44.022 debug Initialization of scale factors done! modbus.1 2023-03-12 09:59:44.020 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 09:59:44.019 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 09:59:43.765 debug Remove old object modbus.1.inputRegisters.3.40072_Amps modbus.1 2023-03-12 09:59:43.711 debug Initialize Objects for holdingRegs: [] modbus.1 2023-03-12 09:59:43.710 debug Add inputRegisters.3.10071_Amps: {"_id":"inputRegisters.3.10071_Amps","type":"state","common":{"name":"Amps","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"A"},"native":{"regType":"inputRegs","address":10071,"deviceId":3,"type":"uint16be","len":1,"offset":0,"factor":1}} modbus.1 2023-03-12 09:59:43.709 debug Initialize Objects for inputRegs: [{"_address":10071,"deviceId":3,"name":"Amps","description":"Amps","unit":"A","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":10071,"id":"inputRegisters.3.10071_Amps"}] modbus.1 2023-03-12 09:59:43.708 debug Initialize Objects for coils: [] modbus.1 2023-03-12 09:59:43.707 debug Initialize Objects for disInputs: [] modbus.1 2023-03-12 09:59:43.496 info starting. Version 5.0.11 in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.0, js-controller: 4.0.23 modbus.1 2023-03-12 09:59:43.105 debug Plugin sentry Initialize Plugin (enabled=true) modbus.1 2023-03-12 09:59:42.973 debug States connected to redis: 127.0.0.1:9000 modbus.1 2023-03-12 09:59:42.880 debug States create User PubSub Client modbus.1 2023-03-12 09:59:42.878 debug States create System PubSub Client modbus.1 2023-03-12 09:59:42.855 debug Redis States: Use Redis connection: 127.0.0.1:9000 modbus.1 2023-03-12 09:59:42.812 debug Objects connected to redis: 127.0.0.1:9001 modbus.1 2023-03-12 09:59:42.804 debug Objects client initialize lua scripts modbus.1 2023-03-12 09:59:42.714 debug Objects create User PubSub Client modbus.1 2023-03-12 09:59:42.713 debug Objects create System PubSub Client modbus.1 2023-03-12 09:59:42.710 debug Objects client ready ... initialize now modbus.1 2023-03-12 09:59:42.655 debug Redis Objects: Use Redis connection: 127.0.0.1:9001 modbus.1 2023-03-12 09:59:38.175 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason modbus.1 2023-03-12 09:59:38.175 debug Plugin sentry destroyed modbus.1 2023-03-12 09:59:38.173 info terminating modbus.1 2023-03-12 09:59:38.170 debug Closing client on purpose. modbus.1 2023-03-12 09:59:38.168 info Got terminate signal TERMINATE_YOURSELF modbus.1 2023-03-12 09:59:16.633 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 09:59:16.632 debug Closing client on purpose. modbus.1 2023-03-12 09:59:15.636 debug Cleaning up request fifo. modbus.1 2023-03-12 09:59:15.635 debug Clearing timeout of the current request. modbus.1 2023-03-12 09:59:15.635 debug Socket closed with error modbus.1 2023-03-12 09:59:15.633 warn Poll error count: 7 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 09:59:15.632 error Client in error state. modbus.1 2023-03-12 09:59:15.631 error Request timed out. modbus.1 2023-03-12 09:59:15.631 warn Error: undefined modbus.1 2023-03-12 09:59:10.630 debug [DevID_3/inputRegs] Poll address 10071 - 1 registers modbus.1 2023-03-12 09:59:10.629 debug [DevID_3] Poll start --------------------- -
Jetzt noch das Register bei Holding und nicht Input eintragen, wie im Beispiel aus dem Link, und haken bei "Abfrage".
Dann mal log bitte.
-
v6.3.5 2424 Log-Größe: 299.8 KB Zeit Nachricht modbus.1 2023-03-12 10:22:06.962 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:22:06.961 debug Closing client on purpose. modbus.1 2023-03-12 10:22:05.964 debug Cleaning up request fifo. modbus.1 2023-03-12 10:22:05.964 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:22:05.963 debug Socket closed with error modbus.1 2023-03-12 10:22:05.961 warn Poll error count: 3 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:22:05.960 error Client in error state. modbus.1 2023-03-12 10:22:05.960 error Request timed out. modbus.1 2023-03-12 10:22:05.959 warn Error: undefined modbus.1 2023-03-12 10:22:00.958 debug [DevID_3/holdingRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:22:00.958 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:22:00.957 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:21:00.954 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:21:00.953 debug Closing client on purpose. modbus.1 2023-03-12 10:20:59.958 debug Cleaning up request fifo. modbus.1 2023-03-12 10:20:59.958 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:20:59.957 debug Socket closed with error modbus.1 2023-03-12 10:20:59.955 warn Poll error count: 2 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:20:59.954 error Client in error state. modbus.1 2023-03-12 10:20:59.953 error Request timed out. modbus.1 2023-03-12 10:20:59.952 warn Error: undefined modbus.1 2023-03-12 10:20:54.950 debug [DevID_3/holdingRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:20:54.950 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:20:54.948 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:19:54.945 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:19:54.944 debug Closing client on purpose. modbus.1 2023-03-12 10:19:53.950 debug Cleaning up request fifo. modbus.1 2023-03-12 10:19:53.949 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:19:53.948 debug Socket closed with error modbus.1 2023-03-12 10:19:53.945 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:19:53.944 error Client in error state. modbus.1 2023-03-12 10:19:53.943 error Request timed out. modbus.1 2023-03-12 10:19:53.942 warn Error: undefined modbus.1 2023-03-12 10:19:48.934 debug [DevID_3/holdingRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:19:48.933 debug Initialization of scale factors done! modbus.1 2023-03-12 10:19:48.931 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:19:48.930 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:19:48.652 debug Remove old object modbus.1.inputRegisters.40072_Amps modbus.1 2023-03-12 10:19:48.598 debug Add holdingRegisters.40072_Amps: {"_id":"holdingRegisters.40072_Amps","type":"state","common":{"name":"Amps","role":"level","type":"number","read":true,"write":true,"def":0,"unit":"A"},"native":{"regType":"holdingRegs","address":40072,"deviceId":3,"type":"uint16be","len":1,"offset":0,"factor":1,"poll":true}} modbus.1 2023-03-12 10:19:48.597 debug Initialize Objects for holdingRegs: [{"_address":"40072","name":"Amps","description":"Amps","unit":"A","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","poll":true,"wp":"","cw":"","isScale":"","address":40072,"deviceId":3,"id":"holdingRegisters.40072_Amps"}] modbus.1 2023-03-12 10:19:48.596 debug Initialize Objects for inputRegs: [] modbus.1 2023-03-12 10:19:48.595 debug Initialize Objects for coils: [] modbus.1 2023-03-12 10:19:48.595 debug Initialize Objects for disInputs: [] modbus.1 2023-03-12 10:19:48.380 info starting. Version 5.0.11 in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.0, js-controller: 4.0.23 modbus.1 2023-03-12 10:19:47.900 debug Plugin sentry Initialize Plugin (enabled=true) modbus.1 2023-03-12 10:19:47.748 debug States connected to redis: 127.0.0.1:9000 modbus.1 2023-03-12 10:19:47.669 debug States create User PubSub Client modbus.1 2023-03-12 10:19:47.667 debug States create System PubSub Client modbus.1 2023-03-12 10:19:47.644 debug Redis States: Use Redis connection: 127.0.0.1:9000 modbus.1 2023-03-12 10:19:47.598 debug Objects connected to redis: 127.0.0.1:9001 modbus.1 2023-03-12 10:19:47.590 debug Objects client initialize lua scripts modbus.1 2023-03-12 10:19:47.516 debug Objects create User PubSub Client modbus.1 2023-03-12 10:19:47.514 debug Objects create System PubSub Client modbus.1 2023-03-12 10:19:47.512 debug Objects client ready ... initialize now modbus.1 2023-03-12 10:19:47.456 debug Redis Objects: Use Redis connection: 127.0.0.1:9001 modbus.1 2023-03-12 10:19:42.915 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason modbus.1 2023-03-12 10:19:42.914 debug Plugin sentry destroyed modbus.1 2023-03-12 10:19:42.913 info terminating modbus.1 2023-03-12 10:19:42.910 debug Closing client on purpose. modbus.1 2023-03-12 10:19:42.908 info Got terminate signal TERMINATE_YOURSELF modbus.1 2023-03-12 10:19:18.533 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:19:18.532 debug Closing client on purpose. modbus.1 2023-03-12 10:19:17.539 debug Cleaning up request fifo. modbus.1 2023-03-12 10:19:17.538 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:19:17.537 debug Socket closed with error modbus.1 2023-03-12 10:19:17.533 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:19:17.532 error Client in error state. modbus.1 2023-03-12 10:19:17.531 error Request timed out. modbus.1 2023-03-12 10:19:17.530 warn Error: undefined modbus.1 2023-03-12 10:19:12.523 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:19:12.522 debug Initialization of scale factors done! modbus.1 2023-03-12 10:19:12.519 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:19:12.518 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:19:12.206 debug Add holdingRegisters.40072_Amps: {"_id":"holdingRegisters.40072_Amps","type":"state","common":{"name":"Amps","role":"level","type":"number","read":true,"write":true,"def":0,"unit":"A"},"native":{"regType":"holdingRegs","address":40072,"deviceId":3,"type":"uint16be","len":1,"offset":0,"factor":1,"poll":true}} modbus.1 2023-03-12 10:19:12.206 debug Initialize Objects for holdingRegs: [{"_address":"40072","name":"Amps","description":"Amps","unit":"A","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","poll":true,"wp":"","cw":"","isScale":"","address":40072,"deviceId":3,"id":"holdingRegisters.40072_Amps"}] modbus.1 2023-03-12 10:19:12.205 debug Add inputRegisters.40072_Amps: {"_id":"inputRegisters.40072_Amps","type":"state","common":{"name":"Amps","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"A"},"native":{"regType":"inputRegs","address":40072,"deviceId":3,"type":"uint16be","len":1,"offset":0,"factor":1}} modbus.1 2023-03-12 10:19:12.204 debug Initialize Objects for inputRegs: [{"_address":"40072","deviceId":3,"name":"Amps","description":"Amps","unit":"A","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":40072,"id":"inputRegisters.40072_Amps"}] modbus.1 2023-03-12 10:19:12.204 debug Initialize Objects for coils: [] modbus.1 2023-03-12 10:19:12.203 debug Initialize Objects for disInputs: [] modbus.1 2023-03-12 10:19:12.009 info starting. Version 5.0.11 in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.0, js-controller: 4.0.23 modbus.1 2023-03-12 10:19:11.576 debug Plugin sentry Initialize Plugin (enabled=true) modbus.1 2023-03-12 10:19:11.449 debug States connected to redis: 127.0.0.1:9000 modbus.1 2023-03-12 10:19:11.370 debug States create User PubSub Client modbus.1 2023-03-12 10:19:11.368 debug States create System PubSub Client modbus.1 2023-03-12 10:19:11.344 debug Redis States: Use Redis connection: 127.0.0.1:9000 modbus.1 2023-03-12 10:19:11.300 debug Objects connected to redis: 127.0.0.1:9001 modbus.1 2023-03-12 10:19:11.291 debug Objects client initialize lua scripts modbus.1 2023-03-12 10:19:11.216 debug Objects create User PubSub Client modbus.1 2023-03-12 10:19:11.214 debug Objects create System PubSub Client modbus.1 2023-03-12 10:19:11.211 debug Objects client ready ... initialize now modbus.1 2023-03-12 10:19:11.152 debug Redis Objects: Use Redis connection: 127.0.0.1:9001 modbus.1 2023-03-12 10:19:06.520 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason modbus.1 2023-03-12 10:19:06.520 debug Plugin sentry destroyed modbus.1 2023-03-12 10:19:06.518 info terminating modbus.1 2023-03-12 10:19:06.515 debug Closing client on purpose. modbus.1 2023-03-12 10:19:06.513 info Got terminate signal TERMINATE_YOURSELF modbus.1 2023-03-12 10:19:01.898 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:19:01.897 debug Closing client on purpose. modbus.1 2023-03-12 10:19:00.904 debug Cleaning up request fifo. modbus.1 2023-03-12 10:19:00.904 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:19:00.903 debug Socket closed with error modbus.1 2023-03-12 10:19:00.898 warn Poll error count: 1 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:19:00.896 error Client in error state. modbus.1 2023-03-12 10:19:00.896 error Request timed out. modbus.1 2023-03-12 10:19:00.895 warn Error: undefined modbus.1 2023-03-12 10:18:55.888 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:18:55.887 debug Initialization of scale factors done! modbus.1 2023-03-12 10:18:55.885 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:18:55.884 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:18:55.579 debug Add holdingRegisters.40072_Amps: {"_id":"holdingRegisters.40072_Amps","type":"state","common":{"name":"Amps","role":"level","type":"number","read":true,"write":true,"def":0,"unit":"A"},"native":{"regType":"holdingRegs","address":40072,"deviceId":3,"type":"int16le","len":1,"offset":0,"factor":1,"poll":true}} modbus.1 2023-03-12 10:18:55.578 debug Initialize Objects for holdingRegs: [{"_address":"40072","name":"Amps","description":"Amps","unit":"A","type":"int16le","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","poll":true,"wp":"","cw":"","isScale":"","address":40072,"deviceId":3,"id":"holdingRegisters.40072_Amps"}] modbus.1 2023-03-12 10:18:55.578 debug Add inputRegisters.40072_Amps: {"_id":"inputRegisters.40072_Amps","type":"state","common":{"name":"Amps","role":"level","type":"number","read":true,"write":false,"def":0,"unit":"A"},"native":{"regType":"inputRegs","address":40072,"deviceId":3,"type":"uint16be","len":1,"offset":0,"factor":1}} modbus.1 2023-03-12 10:18:55.576 debug Initialize Objects for inputRegs: [{"_address":"40072","deviceId":3,"name":"Amps","description":"Amps","unit":"A","type":"uint16be","len":1,"factor":1,"offset":0,"formula":"","role":"level","room":"","cw":"","isScale":"","address":40072,"id":"inputRegisters.40072_Amps"}] modbus.1 2023-03-12 10:18:55.576 debug Initialize Objects for coils: [] modbus.1 2023-03-12 10:18:55.575 debug Initialize Objects for disInputs: [] modbus.1 2023-03-12 10:18:55.369 info starting. Version 5.0.11 in /opt/iobroker/node_modules/iobroker.modbus, node: v16.19.0, js-controller: 4.0.23 modbus.1 2023-03-12 10:18:54.876 debug Plugin sentry Initialize Plugin (enabled=true) modbus.1 2023-03-12 10:18:54.752 debug States connected to redis: 127.0.0.1:9000 modbus.1 2023-03-12 10:18:54.706 debug States create User PubSub Client modbus.1 2023-03-12 10:18:54.703 debug States create System PubSub Client modbus.1 2023-03-12 10:18:54.639 debug Redis States: Use Redis connection: 127.0.0.1:9000 modbus.1 2023-03-12 10:18:54.590 debug Objects connected to redis: 127.0.0.1:9001 modbus.1 2023-03-12 10:18:54.581 debug Objects client initialize lua scripts modbus.1 2023-03-12 10:18:54.501 debug Objects create User PubSub Client modbus.1 2023-03-12 10:18:54.499 debug Objects create System PubSub Client modbus.1 2023-03-12 10:18:54.497 debug Objects client ready ... initialize now modbus.1 2023-03-12 10:18:54.436 debug Redis Objects: Use Redis connection: 127.0.0.1:9001 modbus.1 2023-03-12 10:18:49.962 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason modbus.1 2023-03-12 10:18:49.961 debug Plugin sentry destroyed modbus.1 2023-03-12 10:18:49.960 info terminating modbus.1 2023-03-12 10:18:49.956 debug Closing client on purpose. modbus.1 2023-03-12 10:18:49.954 info Got terminate signal TERMINATE_YOURSELF modbus.1 2023-03-12 10:17:50.318 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:17:50.318 debug Closing client on purpose. modbus.1 2023-03-12 10:17:49.322 debug Cleaning up request fifo. modbus.1 2023-03-12 10:17:49.321 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:17:49.321 debug Socket closed with error modbus.1 2023-03-12 10:17:49.319 warn Poll error count: 10 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:17:49.319 error Client in error state. modbus.1 2023-03-12 10:17:49.318 error Request timed out. modbus.1 2023-03-12 10:17:49.318 warn Error: undefined modbus.1 2023-03-12 10:17:44.317 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:17:44.316 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:17:44.315 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:16:44.313 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:16:44.313 debug Closing client on purpose. modbus.1 2023-03-12 10:16:43.323 debug Cleaning up request fifo. modbus.1 2023-03-12 10:16:43.322 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:16:43.322 debug Socket closed with error modbus.1 2023-03-12 10:16:43.314 warn Poll error count: 9 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:16:43.313 error Client in error state. modbus.1 2023-03-12 10:16:43.313 error Request timed out. modbus.1 2023-03-12 10:16:43.312 warn Error: undefined modbus.1 2023-03-12 10:16:38.311 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:16:38.310 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:16:38.309 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:15:38.307 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:15:38.307 debug Closing client on purpose. modbus.1 2023-03-12 10:15:37.311 debug Cleaning up request fifo. modbus.1 2023-03-12 10:15:37.311 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:15:37.310 debug Socket closed with error modbus.1 2023-03-12 10:15:37.308 warn Poll error count: 8 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:15:37.307 error Client in error state. modbus.1 2023-03-12 10:15:37.307 error Request timed out. modbus.1 2023-03-12 10:15:37.306 warn Error: undefined modbus.1 2023-03-12 10:15:32.304 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:15:32.303 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:15:32.302 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:14:32.299 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:14:32.299 debug Closing client on purpose. modbus.1 2023-03-12 10:14:31.303 debug Cleaning up request fifo. modbus.1 2023-03-12 10:14:31.303 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:14:31.302 debug Socket closed with error modbus.1 2023-03-12 10:14:31.300 warn Poll error count: 7 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:14:31.299 error Client in error state. modbus.1 2023-03-12 10:14:31.299 error Request timed out. modbus.1 2023-03-12 10:14:31.298 warn Error: undefined modbus.1 2023-03-12 10:14:26.297 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:14:26.296 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:14:26.296 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:13:26.292 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:13:26.292 debug Closing client on purpose. modbus.1 2023-03-12 10:13:25.300 debug Cleaning up request fifo. modbus.1 2023-03-12 10:13:25.299 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:13:25.299 debug Socket closed with error modbus.1 2023-03-12 10:13:25.293 warn Poll error count: 6 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:13:25.292 error Client in error state. modbus.1 2023-03-12 10:13:25.291 error Request timed out. modbus.1 2023-03-12 10:13:25.291 warn Error: undefined modbus.1 2023-03-12 10:13:20.288 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:13:20.288 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:13:20.287 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:12:20.284 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:12:20.283 debug Closing client on purpose. modbus.1 2023-03-12 10:12:19.287 debug Cleaning up request fifo. modbus.1 2023-03-12 10:12:19.286 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:12:19.286 debug Socket closed with error modbus.1 2023-03-12 10:12:19.284 warn Poll error count: 5 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:12:19.283 error Client in error state. modbus.1 2023-03-12 10:12:19.283 error Request timed out. modbus.1 2023-03-12 10:12:19.282 warn Error: undefined modbus.1 2023-03-12 10:12:14.281 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:12:14.280 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:12:14.279 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:11:14.277 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:11:14.276 debug Closing client on purpose. modbus.1 2023-03-12 10:11:13.280 debug Cleaning up request fifo. modbus.1 2023-03-12 10:11:13.280 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:11:13.280 debug Socket closed with error modbus.1 2023-03-12 10:11:13.277 warn Poll error count: 4 code: {"err":"timeout","timeout":5000} modbus.1 2023-03-12 10:11:13.276 error Client in error state. modbus.1 2023-03-12 10:11:13.276 error Request timed out. modbus.1 2023-03-12 10:11:13.275 warn Error: undefined modbus.1 2023-03-12 10:11:08.274 debug [DevID_3/inputRegs] Poll address 40072 - 1 registers modbus.1 2023-03-12 10:11:08.273 debug [DevID_3] Poll start --------------------- modbus.1 2023-03-12 10:11:08.273 info Connected to slave 192.168.1.97 modbus.1 2023-03-12 10:10:08.270 info Disconnected from slave 192.168.1.97 modbus.1 2023-03-12 10:10:08.269 debug Closing client on purpose. modbus.1 2023-03-12 10:10:07.275 debug Cleaning up request fifo. modbus.1 2023-03-12 10:10:07.275 debug Clearing timeout of the current request. modbus.1 2023-03-12 10:10:07.274 debug Socket closed with error -
@stronoff Hm,
die Auswahl Anzahl Bits im Waveshare mit "8" ist ja nirgendwo dokumentiert, könnte also falsch sein.
Wie ist die Verbindung zwischen Waveshare und Kaco aufgebaut?
-
Der Elektriker hat ein Patch Kabel aufgeschnitten und den Stecker am Kaco eingesteckt und PIN1 und 2 am Waveshare "verschraubt".
Der Waveshare blinkt auch immer "Active" wenn am Kaco die Kommunikations LED blinkt.
-
@stronoff wäre ein Versuch wert am Waveshare mal zu tauschen.
-
@wendy2702
Habe ich auch schon überlegt.Werd's mal probieren.
-
Danke Dir auf jeden Fall schon mal für Deine Unterstützung!
-
Heute war der Elektriker da und ich konnte das erste Mal hinter die Abdeckung sehen
Wir haben die Anschlüsse "durchgepiepst" und es war erst mal alles so, wie es gemäß Kaco Beschreibung sein sollte:
Mir fiel allerdings auf, dass die Ummantelung des Netzwerkkabels nicht am Waveshare angeschlossen war. Laut Elektriker unrelevant, ich wollte es aber trotzdem austesten und habe daher die Ummantelung (siehe Pfeile) anbringen lassen:
Ich habe die Anschlüsse daher jetzt erstmal nicht tauschen lassen. Ich kann leider erst am Samstag und Sonntag wieder testen. Wenn's nicht funktioniert, würde ich als nächstes 485A und 485B tauschen.
Was meinst Du? Ist die Verkabelung soweit OK oder ist aus Deiner Sicht ein Fehler vorhanden?
In der Anleitung stand noch was von einem Abschlusswiderstand.
Ist das für meine Verkabelung relevant? Laut Elektriker nicht, ich werde daraus aber nicht schlüssig...
-
@stronoff Weiss nicht wie lang das Kabel zwischen Waveshare und Kaco ist aber eigentlich reichen dann zwei drähte.
Ich habe bei mir ca. 1m dazwischen, alte IYSTY Kabel und davon ein Adernpaar genommen.
-
-
Hallo in die Runde,
seit Ihr mit der installation weiter gekommen, und läuft diese Lösung mit KACO und iobroker?
Überlege auch den KACO 10 NX2 mit Waveshare in den Iobroker zu bekommen, gefällt mir besser als mit Shelly EM3 und Zangen auszulesen.
-
@wierer-sigi warum in zwei Threads?
-
@homoran sagte in Kaco Blueplanet NX3 M2->RS485 TO POE ETH an Modbus Problem:
@wierer-sigi warum in zwei Threads?
Sorry - hatte erst wegen der Anbindung zur direkten Anbindung via Modbus Adapter im iobroker gefragt. Dann aber in diesem Teil erfahren das dies direkt wohl nicht klappt aber über in diesen Thread beschriebenen Waveshare RS485 TO POE adapter doch eine Möglichkeit gibt.
-
Der Kaco WR lässt sich direkt abfragen, wenn eine WLAN-Verbindung eingerichtet ist. Ein RS485 Adapter auf TCP ist nicht nötig. Die Einstellung habe ich in deinem anderen Thread gepostet.
-
@mitch23 sagte in Kaco Blueplanet NX3 M2->RS485 TO POE ETH an Modbus Problem:
Der Kaco WR lässt sich direkt abfragen, wenn eine WLAN-Verbindung eingerichtet ist. Ein RS485 Adapter auf TCP ist nicht nötig. Die Einstellung habe ich in deinem anderen Thread gepostet.
Hi, ich nutze den WLAN Stick von Kaco. Kannst du mir sagen, wie ich per WLAN die Daten in den ioBroker bekomme? Habe keinen Adapter dafür gefunden, oder verstehe ich dich da falsch?
