[How-to] Node.js ioBroker richtig updaten-2021/22 Edition
-
Bei mir klappt die Aktualisierung auf Node.js 12 leider nicht.
Jedes mal kommt folgende Meldung:"Error executing command, exiting."
Hat jemand eine Idee, woran das liegt? Scheinbar findet er keine Release Datei?
-
@dome227 Bitte keine Screenshots von Konsolentext.
-
@dome227 sagte in [How-to] Node.js für ioBroker richtig updaten - 2021 Edition:
Hat jemand eine Idee, woran das liegt?
Jessie ist mausetot!
da gibt es keine Pakete mehr für -
Habe den Link aus der Anleitung oben genommen, um Node.js zu aktualisieren. Bzw. anschließend auch mal den "selben" Link aus dem Github.
Wie wäre die korrekte Vorgehensweise, um auf Node.js aktualisieren zu können?Sorry, habe meinen ioBroker bereits mit 10.x aufgesetzt, somit also noch kein Upgrade gemacht.
Sorry, habe den Screenshot rausgenommen.
-
@dome227 sagte in [How-to] Node.js für ioBroker richtig updaten - 2021 Edition:
Habe den Link aus der Anleitung oben genommen, um Node.js zu aktualisieren.
das hilft aber nichts bei einem Linux, dass bereits seit längerem End of Life ist.
Da musst du erst dein Linux auf Buster bringen -
@dome227
Du solltest den Text in CodeTags posten.Du fährst da eine mausetote Distribution und hämmert dann noch ein Repo für ein anderes Release rein. Das kann nicht funktionieren.
-
Danke euch für die schnelle Rückmeldung.
Dann bring ich erstmal mein komplettes System up-to-date
"Einmal mit Windows-Menschen......"
LG und schöne Restwoche!
-
@dome227 sagte in [How-to] Node.js für ioBroker richtig updaten - 2021 Edition:
Dann bring ich erstmal mein komplettes System up-to-date
da du noch auf Jessie bist, und über stretch zu buster müsstest, wäre es am einfachsten ein Backup des ioBrokers zu machen, dann eine komplette neue Installation aufzusetzen und danach das backup zurückspielen.
-
Leider klappt das bei mir nicht.
Nach "sudo apt-get install -y nodejs" kommt die Meldung "nodejs ist schon die neueste Version (12.22.1-lnodesourcel)."
Wenn ich mit "node -v" überprüfe kommt v10.20.1 (das gleiche wie in der Info)
Was mache ich verkehrt? -
@tobili03 sagte in [How-to] Node.js für ioBroker richtig updaten - 2021 Edition:
Was mache ich verkehrt?
dann hast du wahrscheinlich zwei unterschiedliche node-Installationen parallel auf deinem Server.
Mindesttens eine davon nicht korrekt installiert -
@tobili03
Schau in meine Signatur, da steht drin wie man das wieder gerade fummelt -
@apollon77 die rebuild kommandos haben geholfen
2021-04-28 18:02:05.705 - error: host.raspberrypi Caught by controller[0]: /opt/iobroker/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:121 2021-04-28 18:02:05.705 - error: host.raspberrypi Caught by controller[0]: throw e; 2021-04-28 18:02:05.705 - error: host.raspberrypi Caught by controller[0]: ^ 2021-04-28 18:02:05.706 - error: host.raspberrypi Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/Release/bindings.node' 2021-04-28 18:02:05.706 - error: host.raspberrypi Caught by controller[0]: was compiled against a different Node.js version using 2021-04-28 18:02:05.706 - error: host.raspberrypi Caught by controller[0]: NODE_MODULE_VERSION 64. This version of Node.js requires 2021-04-28 18:02:05.706 - error: host.raspberrypi Caught by controller[0]: NODE_MODULE_VERSION 72. Please try re-compiling or re-installing 2021-04-28 18:02:05.706 - error: host.raspberrypi Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`). 2021-04-28 18:02:05.706 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:1057:18) 2021-04-28 18:02:05.707 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:863:32) 2021-04-28 18:02:05.707 - error: host.raspberrypi Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:708:14) 2021-04-28 18:02:05.707 - error: host.raspberrypi Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:887:19) 2021-04-28 18:02:05.707 - error: host.raspberrypi Caught by controller[0]: at require (internal/modules/cjs/helpers.js:74:18) 2021-04-28 18:02:05.707 - error: host.raspberrypi Caught by controller[0]: at bindings (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:112:48) 2021-04-28 18:02:05.708 - error: host.raspberrypi Caught by controller[0]: at Object. (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/linux.js:2:36) 2021-04-28 18:02:05.708 - error: host.raspberrypi Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:999:30) 2021-04-28 18:02:05.708 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1027:10) 2021-04-28 18:02:05.708 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:863:32) 2021-04-28 18:02:05.709 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2021-04-28 18:02:05.709 - info: host.raspberrypi Adapter system.adapter.zigbee.0 needs rebuild and will be restarted afterwards. 2021-04-28 18:02:05.709 - info: host.raspberrypi system.adapter.zigbee.0 will be rebuilt 2021-04-28 18:02:05.710 - warn: host.raspberrypi adapter "zigbee" seems to be installed for a different version of Node.js. Trying to rebuild it... 1 attempt 2021-04-28 18:02:05.711 - info: host.raspberrypi iobroker rebuild zigbee 2021-04-28 18:02:06.561 - info: host.raspberrypi iobroker npm-rebuild: npm rebuild --loglevel error (System call) in "/opt/iobroker/node_modules/iobroker.zigbee" 2021-04-28 18:02:07.142 - info: cloud.0 (3873) Trying to connect as system.user.admin 2021-04-28 18:02:07.229 - info: sql.0 (4633) enabled logging of sourceanalytix.0.0_userdata__0__netzeinspeisung.currentYear.delivered.05_currentYear, Alias=false 2021-04-28 18:02:07.291 - info: cloud.0 (3873) Connection changed: connect 2021-04-28 18:02:07.465 - info: sourceanalytix.0 (4617) Initialization (7 of 9) finished for : 0_userdata.0.netzeinspeisung 2021-04-28 18:02:07.465 - info: sourceanalytix.0 (4617) Initialising (8 of 9) state sonnen.0.status.consumption 2021-04-28 18:02:08.566 - info: host.raspberrypi iobroker npm-rebuild: Rebuild zigbee done 2021-04-28 18:02:08.904 - info: host.raspberrypi instance system.adapter.discovergy.0 started with pid 4758 2021-04-28 18:02:09.579 - info: host.raspberrypi iobroker npm-rebuild: exit 0 2021-04-28 18:02:09.629 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 4765 2021-04-28 18:02:09.788 - info: sourceanalytix.0 (4617) Initialization (8 of 9) finished for : sonnen.0.status.consumption 2021-04-28 18:02:09.788 - info: sourceanalytix.0 (4617) Initialising (9 of 9) state 0_userdata.0.Steckdosen.Josef_Zimmer_Heizung 2021-04-28 18:02:10.547 - error: host.raspberrypi Caught by controller[0]: /opt/iobroker/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:121 2021-04-28 18:02:10.548 - error: host.raspberrypi Caught by controller[0]: throw e; 2021-04-28 18:02:10.548 - error: host.raspberrypi Caught by controller[0]: ^ 2021-04-28 18:02:10.548 - error: host.raspberrypi Caught by controller[0]: Error: The module '/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/Release/bindings.node' 2021-04-28 18:02:10.549 - error: host.raspberrypi Caught by controller[0]: was compiled against a different Node.js version using 2021-04-28 18:02:10.549 - error: host.raspberrypi Caught by controller[0]: NODE_MODULE_VERSION 64. This version of Node.js requires 2021-04-28 18:02:10.552 - error: host.raspberrypi Caught by controller[0]: NODE_MODULE_VERSION 72. Please try re-compiling or re-installing 2021-04-28 18:02:10.553 - error: host.raspberrypi Caught by controller[0]: the module (for instance, using `npm rebuild` or `npm install`). 2021-04-28 18:02:10.553 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..node (internal/modules/cjs/loader.js:1057:18) 2021-04-28 18:02:10.553 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:863:32) 2021-04-28 18:02:10.553 - error: host.raspberrypi Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:708:14) 2021-04-28 18:02:10.554 - error: host.raspberrypi Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:887:19) 2021-04-28 18:02:10.554 - error: host.raspberrypi Caught by controller[0]: at require (internal/modules/cjs/helpers.js:74:18) 2021-04-28 18:02:10.554 - error: host.raspberrypi Caught by controller[0]: at bindings (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:112:48) 2021-04-28 18:02:10.554 - error: host.raspberrypi Caught by controller[0]: at Object. (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/linux.js:2:36) 2021-04-28 18:02:10.555 - error: host.raspberrypi Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:999:30) 2021-04-28 18:02:10.555 - error: host.raspberrypi Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1027:10) 2021-04-28 18:02:10.555 - error: host.raspberrypi Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:863:32) 2021-04-28 18:02:10.555 - error: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED) 2021-04-28 18:02:10.556 - info: host.raspberrypi Adapter system.adapter.zigbee.0 needs rebuild and will be restarted afterwards. 2021-04-28 18:02:10.556 - info: host.raspberrypi system.adapter.zigbee.0 will be rebuilt 2021-04-28 18:02:10.556 - warn: host.raspberrypi adapter "zigbee" seems to be installed for a different version of Node.js. Trying to rebuild it... 2 attempt 2021-04-28 18:02:10.557 - info: host.raspberrypi iobroker rebuild zigbee --install 2021-04-28 18:02:11.490 - info: host.raspberrypi iobroker npm-rebuild: npm install --loglevel error --production (System call) in "/opt/iobroker/node_modules/iobroker.zigbee" 2021-04-28 18:02:12.172 - info: discovergy.0 (4758) starting. Version 0.5.6 in /opt/iobroker/node_modules/iobroker.discovergy, node: v12.22.1, js-controller: 3.2.16 2021-04-28 18:02:12.242 - info: discovergy.0 (4758) Discovergy Adapter startet, trying to discover meters associated with your account 2021-04-28 18:02:12.263 - warn: discovergy.0 (4758) State "system.this.discovergy.0.alive" has no existing object, this might lead to an error in future versions 2021-04-28 18:02:12.939 - info: host.raspberrypi instance system.adapter.go-e.0 started with pid 4800 2021-04-28 18:02:13.496 - info: discovergy.0 (4758) All meters associated to your account discovered, initialise meters 2021-04-28 18:02:13.626 - info: discovergy.0 (4758) All meters initialized, polling data every 5 seconds 2021-04-28 18:02:14.049 - info: sourceanalytix.0 (4617) Initialization (9 of 9) finished for : 0_userdata.0.Steckdosen.Josef_Zimmer_Heizung 2021-04-28 18:02:14.063 - info: sourceanalytix.0 (4617) SourceAnalytix initialisation finalized, will handle calculations ... for 9 states 2021-04-28 18:02:16.361 - info: go-e.0 (4800) starting. Version 1.0.0 in /opt/iobroker/node_modules/iobroker.go-e, node: v12.22.1, js-controller: 3.2.16 2021-04-28 18:02:16.401 - info: go-e.0 (4800) Server: 192.168.178.31 2021-04-28 18:02:16.402 - info: go-e.0 (4800) Intervall: 60 2021-04-28 18:03:16.420 - info: host.raspberrypi "system.adapter.zigbee.0" disabled 2021-04-28 18:03:20.392 - info: host.raspberrypi "system.adapter.zigbee.0" enabled 2021-04-28 18:04:45.475 - info: admin.0 (3838) Request actual repository... 2021-04-28 18:04:46.068 - info: host.raspberrypi Updating repository "Stable (default)" under "http://download.iobroker.net/sources-dist.json" 2021-04-28 18:04:47.551 - info: admin.0 (3838) Repository received successfully. 2021-04-28 18:05:19.709 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: 2021-04-28 18:05:19.715 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ 2021-04-28 18:05:19.719 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ 2021-04-28 18:05:19.724 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: 2021-04-28 18:05:19.725 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ 2021-04-28 18:05:19.730 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: 2021-04-28 18:05:19.731 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ 2021-04-28 18:05:19.735 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: 2021-04-28 18:05:19.736 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ 2021-04-28 18:05:19.744 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: 2021-04-28 18:05:19.745 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ 2021-04-28 18:05:19.751 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: 2021-04-28 18:05:19.752 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ 2021-04-28 18:05:19.754 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: At global scope:../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local& v8str)) { ^ 2021-04-28 18:05:19.756 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ 2021-04-28 18:05:19.762 - info: host.raspberrypi iobroker npm-rebuild: In file included from ../../../nan/nan.h:56, 2021-04-28 18:05:19.763 - info: host.raspberrypi iobroker npm-rebuild: from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:736:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local, v8::Local, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^/home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:770:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ 2021-04-28 18:05:23.874 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: 2021-04-28 18:05:23.875 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2021-04-28 18:05:23.916 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: 2021-04-28 18:05:23.917 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2021-04-28 18:05:32.702 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: 2021-04-28 18:05:32.703 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ 2021-04-28 18:05:32.709 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: 2021-04-28 18:05:32.711 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ 2021-04-28 18:05:32.715 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ 2021-04-28 18:05:32.718 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ 2021-04-28 18:05:32.723 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: 2021-04-28 18:05:32.724 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ 2021-04-28 18:05:32.728 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ 2021-04-28 18:05:32.735 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: 2021-04-28 18:05:32.735 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ 2021-04-28 18:05:32.741 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: 2021-04-28 18:05:32.742 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ 2021-04-28 18:05:32.745 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp: At global scope:../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local& v8str)) { ^ 2021-04-28 18:05:32.748 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ 2021-04-28 18:05:32.751 - info: host.raspberrypi iobroker npm-rebuild: In file included from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:736:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local, v8::Local, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^/home/iobroker/.cache/node-gyp/12.22.1/include/node/node.h:770:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ 2021-04-28 18:05:36.594 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: 2021-04-28 18:05:36.595 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2021-04-28 18:05:36.635 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: 2021-04-28 18:05:36.636 - info: host.raspberrypi iobroker npm-rebuild: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2021-04-28 18:06:23.521 - info: host.raspberrypi iobroker npm-rebuild: 2021-04-28 18:06:23.522 - info: host.raspberrypi iobroker npm-rebuild: Rebuild zigbee done 2021-04-28 18:06:24.532 - info: host.raspberrypi iobroker npm-rebuild: exit 0 2021-04-28 18:06:24.592 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 5368 2021-04-28 18:06:27.791 - info: zigbee.0 (5368) starting. Version 1.4.4 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.1, js-controller: 3.2.16 2021-04-28 18:06:27.917 - info: zigbee.0 (5368) Starting Zigbee npm ... 2021-04-28 18:06:28.702 - info: zigbee.0 (5368) Installed Version: iobroker.zigbee@1.4.4 2021-04-28 18:06:28.735 - info: zigbee.0 (5368) Coordinator firmware version: {"type":"ConBee2/RaspBee2","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":88,"maintrel":0,"revision":"0x26580700"}} 2021-04-28 18:06:28.758 - info: zigbee.0 (5368) Unable to disable LED, unsupported function. 2021-04-28 18:06:28.759 - info: zigbee.0 (5368) --> transmitPower : normal 2021-04-28 18:06:28.761 - info: zigbee.0 (5368) Unable to set transmit power, unsupported function. 2021-04-28 18:06:28.765 - info: zigbee.0 (5368) Currently 2 devices are joined: 2021-04-28 18:06:28.785 - info: zigbee.0 (5368) 0x00158d0005363273 (addr 49113): WSDCGQ01LM - Xiaomi MiJia temperature & humidity sensor (EndDevice) 2021-04-28 18:06:28.788 - info: zigbee.0 (5368) 0x00158d00054db088 (addr 16208): MCCGQ11LM - Xiaomi Aqara door & window contact sensor (EndDevice) 2021-04-28 18:06:28.789 - info: zigbee.0 (5368) Zigbee started -
@thomas-braun Danke, jetzt habe ich es richtig.
-
@thomas-braun Füge den einen Link mal oben mit ein
-
@apollon77
Welchen Link wo einfügen?
Kannste aber gerne übernehmen. -
@thomas-braun den "verschiedne nodejs versionen fixen" link hab ich immersten Post eingefügt
-
@apollon77 said in [How-to] Node.js für ioBroker richtig updaten - 2021 Edition:
iobroker fix
Super, hat dank der Anleitung alles geklappt!!!
-
Hallo,
ist den V14 schon voll unterstützt?
-
@rushmed
Text gelesen?Auch mit Node.js 14.x sind bisher keine Probleme bekannt, aber es könnte Adapter geben, die nicht vollständig funktionieren.
-
Danke für die Anleitung, habe ganz smooth von Version 10 auf 14 unter Ubuntu 18.04 upgegraded
DANKE!
