Backitup und Grafana
-
Das sieht eher wie eine Installation von minicom als snap aus. Fragt sich aber mal wieder warum... Gibt es nämlich auch über das Debian-Repo:
echad@chet:~ $ apt policy minicom minicom: Installed: (none) Candidate: 2.8-2 Version table: 2.8-2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages -
@thomas-braun Auf dem System läuft ein Volkszähler welcher seriell über USB kommuniziert. Ausserdem ein USB-> Modbus Converter.
Das hängt eventuell damit zusammen.
Hast du einen Link zum upgraden von Buster auf Bullseye ?Wenn es am Wochenende weiter so schifft, kann ichs mal probieren. Vorher muß ich aber nochmal die SD-Karte Klonen damit nicht alles zerschossen wird.
-
-
@thomas-braun Okay Danke für den Link. Ich schau es mir die Tage mal an.
Nur noch eine Frage zur IP Adresse bzw. DHCP was hier angesprochen wird.Kann ich unter
/etc/systemd/system/dhcpcd.service.d/wait.conf
folgenden Code für eine feste IP Adresse verwenden ?
interface eth0 static ip_address=192.168.3.162/24 static routers=192.168.3.1 static domain_name_servers=192.168.3.1 8.8.8.8 fd51:42f8:caae:d92e::1Ich kann keine DHCP Adresse gebrauchen, weil dieses System direkt mit anderen Systemen Kommunizieren muss. Daher möchte ich dort auf jeden Fall eine feste IP drinnen haben.
Im Buster war das ja unter
/etc/dhcpcd.confhinterlegt.
-
Kann ich dir nicht sagen, ich werkel hier mit hostnames und DHCP.
-
@thomas-braun Guten Morgen
Also ich habe mich gestern tatsächlich spät Abends noch durchgerungen einen experimentier-Pi aufzusetzen und das Update von Buster auf Bullseye dort zu installieren.
Resultat ist, das dies wohl anscheinend tatsächlich des Rätsels Lösung war. Das BackitUp läuft nun ohne Probleme durch. Danke nochmal für den Tipp. Trotzdem habe ich festgestellt das immer noch Fehlermeldungen in der NPM Liste stehen welche ich mir nicht erklären kann, weil alle Erweiterungen exakt auf diesen Stand sind welche im Log stehen.Mit dazu habe ich nochmal einen neuen API Key für Grafana erstellt, der hatte auch noch Probleme gemacht.
BackItUp:
Eine neue iobroker Sicherung wurde am 15. April 2023 um 02:40 Uhr erstellt, und nach 85.214.205.194/ via FTP kopiert/verschoben.Hier mal die Logeintrage von npm (/home/iobroker/.npm/_logs/2023-04-15T07_49_11_023Z-debug-0.log)
verbose cli /usr/bin/node /usr/bin/npm 1 info using npm@9.5.1 2 info using node@v18.16.0 3 timing npm:load:whichnode Completed in 3ms 4 timing config:load:defaults Completed in 6ms 5 timing config:load:file:/usr/lib/node_modules/npm/npmrc Completed in 16ms 6 timing config:load:builtin Completed in 17ms 7 timing config:load:cli Completed in 25ms 8 timing config:load:env Completed in 1ms 9 timing config:load:file:/opt/iobroker/node_modules/iobroker.backitup/.npmrc Completed in 1ms 10 timing config:load:project Completed in 10ms 11 timing config:load:file:/home/iobroker/.npmrc Completed in 0ms 12 timing config:load:user Completed in 0ms 13 timing config:load:file:/usr/etc/npmrc Completed in 0ms 14 timing config:load:global Completed in 1ms 15 timing config:load:setEnvs Completed in 3ms 16 timing config:load Completed in 66ms 17 timing npm:load:configload Completed in 66ms 18 timing npm:load:mkdirpcache Completed in 1ms 19 timing npm:load:mkdirplogs Completed in 1ms 20 verbose title npm list 21 verbose argv "list" 22 timing npm:load:setTitle Completed in 4ms 23 timing config:load:flatten Completed in 11ms 24 timing npm:load:display Completed in 13ms 25 verbose logfile logs-max:10 dir:/home/iobroker/.npm/_logs/2023-04-14T22_34_18_626Z- 26 verbose logfile /home/iobroker/.npm/_logs/2023-04-14T22_34_18_626Z-debug-0.log 27 timing npm:load:logFile Completed in 18ms 28 timing npm:load:timers Completed in 0ms 29 timing npm:load:configScope Completed in 0ms 30 timing npm:load Completed in 108ms 31 timing arborist:ctor Completed in 2ms 32 silly logfile start cleaning logs, removing 1 files 33 silly logfile done cleaning log files 34 timing command:list Completed in 102ms 35 verbose stack Error: missing: @alcalzone/release-script-plugin-iobroker@^3.5.9, required by iobroker.backitup@2.6.16 35 verbose stack missing: @alcalzone/release-script-plugin-license@^3.5.9, required by iobroker.backitup@2.6.16 35 verbose stack missing: @alcalzone/release-script@^3.5.9, required by iobroker.backitup@2.6.16 35 verbose stack missing: @googleapis/drive@^4.0.2, required by iobroker.backitup@2.6.16 35 verbose stack missing: @iobroker/adapter-core@^2.6.7, required by iobroker.backitup@2.6.16 35 verbose stack missing: @iobroker/testing@^4.1.0, required by iobroker.backitup@2.6.16 35 verbose stack missing: chai@^4.3.7, required by iobroker.backitup@2.6.16 35 verbose stack missing: dropbox-v2-api@^2.5.10, required by iobroker.backitup@2.6.16 35 verbose stack missing: express@^4.18.2, required by iobroker.backitup@2.6.16 35 verbose stack missing: ftp@^0.3.10, required by iobroker.backitup@2.6.16 35 verbose stack missing: google-auth-library@^8.7.0, required by iobroker.backitup@2.6.16 35 verbose stack missing: gulp@^4.0.2, required by iobroker.backitup@2.6.16 35 verbose stack missing: mocha@^10.2.0, required by iobroker.backitup@2.6.16 35 verbose stack missing: node-wol@^0.1.1, required by iobroker.backitup@2.6.16 35 verbose stack missing: onedrive-api@^1.0.7, required by iobroker.backitup@2.6.16 35 verbose stack missing: request@^2.88.2, required by iobroker.backitup@2.6.16 35 verbose stack missing: tar-fs@^2.1.1, required by iobroker.backitup@2.6.16 35 verbose stack missing: webdav@^4.11.2, required by iobroker.backitup@2.6.16 35 verbose stack at LS.exec (/usr/lib/node_modules/npm/lib/commands/ls.js:203:9) 35 verbose stack at async module.exports (/usr/lib/node_modules/npm/lib/cli.js:134:5) 36 verbose cwd /opt/iobroker/node_modules/iobroker.backitup 37 verbose Linux 6.1.21-v8+ 38 verbose node v18.16.0 39 verbose npm v9.5.1 40 error code ELSPROBLEMSHier der Stand seit heute Morgen (iob diag):
Skript v.2023-04-02 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.5 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 09:45:53 up 8:06, 1 user, load average: 0.85, 0.67, 0.63 CPU threads: 4 *** Time and Time Zones *** Local time: Sat 2023-04-15 09:45:53 CEST Universal time: Sat 2023-04-15 07:45:53 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.1G 1.7G 0.0K 924M 2.7G Swap: 99M 0B 99M Total: 3.9G 1.1G 1.8G 3794 M total memory 1124 M used memory 1232 M active memory 650 M inactive memory 1745 M free memory 100 M buffer memory 824 M swap cache 99 M total swap 0 M used swap 99 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 30G 5.2G 23G 19% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1008K 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/loop0 squashfs 384K 384K 0 100% /snap/minicom/1 /dev/loop2 squashfs 99M 99M 0 100% /snap/core/14950 /dev/loop1 squashfs 99M 99M 0 100% /snap/core/14788 /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 380M 4.0K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat Apr 15 01:38:56 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena ble_hdmi=1 smsc95xx.macaddr=E4:5F:01:A9:73:27 vc_mem.mem_base=0x3ec00000 vc_mem .mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=a62f624d-0 2 rootfstype=ext4 fsck.repair=yes rootwait [Sat Apr 15 01:38:57 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sat Apr 15 01:38:57 2023] VFS: Mounted root (ext4 filesystem) readonly on devic e 179:2. [Sat Apr 15 01:38:59 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/snap/minicom/1 /dev/loop0 squashfs ro,nodev,relatime,errors=continue |-/snap/core/14950 /dev/loop2 squashfs ro,nodev,relatime,errors=continue |-/snap/core/14788 /dev/loop1 squashfs ro,nodev,relatime,errors=continue `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,cod epage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 1.2G /var/ 535M /var/lib 318M /var/log 294M /var/lib/snapd 200M /var/cache /opt/iobroker/backups: 209M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 299M /opt/iobroker/iobroker-data/ 252M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 51M /opt/iobroker/iobroker-data/files/javascript.admin 35M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 9.1M /opt/iobroker/iobroker-data/objects.jsonl 6.9M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.de0231c 9.chunk.js.map 6.6M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.8083c40d.j s.map 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-n ode_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_ iobr-99c23e.847b8ad9.chunk.js.map 4.9M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/848.7424922 d.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.0 /usr/bin/node v18.16.0 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.0-deb-1nodesource1 Candidate: 18.16.0-deb-1nodesource1 Version table: *** 18.16.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u3 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.23 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.1 : backitup : iobroker - enabled + system.adapter.countdown.0 : countdown : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled + system.adapter.email.0 : email : iobroker - enabled + system.adapter.fronius.0 : fronius : iobroker - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker - enabled system.adapter.icons-icons8.0 : icons-icons8 : iobroker - enabled system.adapter.icons-material-png.0 : icons-material-png : iobroker - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker - enabled + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.kecontact.0 : kecontact : iobroker - enabled + system.adapter.modbus.0 : modbus : iobroker - enabled + system.adapter.modbus.1 : modbus : iobroker - enabled + system.adapter.modbus.2 : modbus : iobroker - enabled + system.adapter.modbus.3 : modbus : iobroker - enabled system.adapter.openweathermap.0 : openweathermap : iobroker - enabled + system.adapter.ping.0 : ping : iobroker - enabled + system.adapter.pvforecast.0 : pvforecast : iobroker - enabled + system.adapter.rpi2.0 : rpi2 : iobroker - enabled + system.adapter.smartmeter.0 : smartmeter : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled system.adapter.weatherunderground.0 : weatherunderground : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.1 : influxdb : iobroker - enabled, port: 8086 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "backitup" : 2.6.16 , installed 2.6.16 Adapter "countdown" : 1.2.5 , installed 1.2.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "email" : 1.1.4 , installed 1.1.4 Adapter "fronius" : 1.1.3 , installed 1.1.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.23 [Updatable] Adapter "kecontact" : 1.5.2 , installed 1.5.2 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "openweathermap": 0.3.3 , installed 0.3.3 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "pvforecast" : 2.3.0 , installed 2.3.0 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-icontwo" : 0.93.0 , installed 0.93.0 Adapter "vis-inventwo" : 3.3.1 , installed 3.3.1 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.4.2, installed 3.4.2 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Objects and States Please stand by - This may take a while Objects: 3685 States: 3195 *** OS-Repositories and Updates *** Hit:1 http://archive.raspbian.org/raspbian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://apt.grafana.com stable InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Hit:6 https://repos.influxdata.com/debian stable InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 16452 759/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 16459 759/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1984 539/sshd: /usr/sbin tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 13037 664/influxd tcp6 0 0 :::8081 :::* LISTEN 1001 14798 784/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 15159 1040/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 14717 664/influxd tcp6 0 0 :::22 :::* LISTEN 0 1986 539/sshd: /usr/sbin tcp6 0 0 :::3000 :::* LISTEN 109 16490 659/grafana udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12772 390/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14214 658/dhcpcd udp 0 0 0.0.0.0:39039 0.0.0.0:* 1001 30278 2683/io.kecontact.0 udp 0 0 0.0.0.0:55611 0.0.0.0:* 108 12774 390/avahi-daemon: r udp 0 0 0.0.0.0:7090 0.0.0.0:* 1001 27137 2683/io.kecontact.0 udp 0 0 0.0.0.0:7092 0.0.0.0:* 1001 27138 2683/io.kecontact.0 udp6 0 0 :::5353 :::* 108 12773 390/avahi-daemon: r udp6 0 0 :::34479 :::* 108 12775 390/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-04-15 09:44:33.791 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:44:39.750 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:44:45.639 - info: smartmeter.0 (2608) Received 13 values, 5 updated 2023-04-15 09:44:51.506 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:44:57.331 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:45:03.117 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:45:08.899 - info: smartmeter.0 (2608) Received 13 values, 4 updated 2023-04-15 09:45:14.601 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:45:20.353 - info: smartmeter.0 (2608) Received 13 values, 5 updated 2023-04-15 09:45:26.075 - info: smartmeter.0 (2608) Received 13 values, 5 updated 2023-04-15 09:45:31.800 - info: smartmeter.0 (2608) Received 13 values, 5 updated 2023-04-15 09:45:37.652 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:45:43.530 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:45:49.296 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:45:55.025 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:46:00.782 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:46:06.467 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:46:12.207 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:46:17.941 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:46:23.605 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:46:29.256 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:46:34.946 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:46:40.701 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:46:46.529 - info: smartmeter.0 (2608) Received 13 values, 6 updated 2023-04-15 09:46:52.261 - info: smartmeter.0 (2608) Received 13 values, 6 updatedUnd hier die npm ls Ausgabe:
pi@iobroker:~ $ cd /opt/iobroker/node_modules/iobroker.backitup pi@iobroker:/opt/iobroker/node_modules/iobroker.backitup $ npm ls npm ERR! code ELSPROBLEMS npm ERR! missing: @alcalzone/release-script-plugin-iobroker@^3.5.9, required by iobroker.backitup@2.6.16 npm ERR! missing: @alcalzone/release-script-plugin-license@^3.5.9, required by iobroker.backitup@2.6.16 npm ERR! missing: @alcalzone/release-script@^3.5.9, required by iobroker.backitup@2.6.16 npm ERR! missing: @googleapis/drive@^4.0.2, required by iobroker.backitup@2.6.16 npm ERR! missing: @iobroker/adapter-core@^2.6.7, required by iobroker.backitup@2.6.16 npm ERR! missing: @iobroker/testing@^4.1.0, required by iobroker.backitup@2.6.16 npm ERR! missing: chai@^4.3.7, required by iobroker.backitup@2.6.16 npm ERR! missing: dropbox-v2-api@^2.5.10, required by iobroker.backitup@2.6.16 npm ERR! missing: express@^4.18.2, required by iobroker.backitup@2.6.16 npm ERR! missing: ftp@^0.3.10, required by iobroker.backitup@2.6.16 npm ERR! missing: google-auth-library@^8.7.0, required by iobroker.backitup@2.6.16 npm ERR! missing: gulp@^4.0.2, required by iobroker.backitup@2.6.16 npm ERR! missing: mocha@^10.2.0, required by iobroker.backitup@2.6.16 npm ERR! missing: node-wol@^0.1.1, required by iobroker.backitup@2.6.16 npm ERR! missing: onedrive-api@^1.0.7, required by iobroker.backitup@2.6.16 npm ERR! missing: request@^2.88.2, required by iobroker.backitup@2.6.16 npm ERR! missing: tar-fs@^2.1.1, required by iobroker.backitup@2.6.16 npm ERR! missing: webdav@^4.11.2, required by iobroker.backitup@2.6.16 iobroker.backitup@2.6.16 /opt/iobroker/node_modules/iobroker.backitup ├── UNMET DEPENDENCY @alcalzone/release-script-plugin-iobroker@^3.5.9 ├── UNMET DEPENDENCY @alcalzone/release-script-plugin-license@^3.5.9 ├── UNMET DEPENDENCY @alcalzone/release-script@^3.5.9 ├── UNMET DEPENDENCY @googleapis/drive@^4.0.2 ├── UNMET DEPENDENCY @iobroker/adapter-core@^2.6.7 ├── UNMET DEPENDENCY @iobroker/testing@^4.1.0 ├── axios@1.3.5 ├── UNMET DEPENDENCY chai@^4.3.7 ├── UNMET DEPENDENCY dropbox-v2-api@^2.5.10 ├── UNMET DEPENDENCY express@^4.18.2 ├── fs-extra@11.1.1 ├── UNMET DEPENDENCY ftp@^0.3.10 ├── UNMET DEPENDENCY google-auth-library@^8.7.0 ├── UNMET DEPENDENCY gulp@^4.0.2 ├── UNMET DEPENDENCY mocha@^10.2.0 ├── node-schedule@2.1.1 ├── UNMET DEPENDENCY node-wol@^0.1.1 ├── UNMET DEPENDENCY onedrive-api@^1.0.7 ├── UNMET DEPENDENCY request@^2.88.2 ├── UNMET DEPENDENCY tar-fs@^2.1.1 └── UNMET DEPENDENCY webdav@^4.11.2 npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2023-04-15T07_49_11_023Z-debug-0.log pi@iobroker:/opt/iobroker/node_modules/iobroker.backitup $Es läuft so jetzt alles wieder problemlos.
Ich hätte aber gerne ein sauberes System. Was kann das noch sein ?Gruß Andi
-
-
Zieh den js-controller noch auf die aktuelle Version und installier den Backitup-Adapter nochmal neu.
-
@kratan75 Aber bitte dann Backitup nicht nur in den Instanzen, sondern auch im Tab Adapter vorher löschen
-
@thomas-braun Hallo Thomas, also wenn ich in dieses Verzeichiss wechsel sieht alles gut aus.
pi@iobroker:~ $ cd /opt/iobroker pi@iobroker:/opt/iobroker $ npm ls iobroker.inst@3.0.0 /opt/iobroker ├── iobroker.admin@6.3.5 ├── iobroker.backitup@2.6.16 ├── iobroker.countdown@1.2.5 ├── iobroker.discovery@3.1.0 ├── iobroker.email@1.1.4 ├── iobroker.fronius@1.1.3 ├── iobroker.icons-addictive-flavour-png@0.1.0 ├── iobroker.icons-icons8@0.0.1 ├── iobroker.icons-material-png@0.1.0 ├── iobroker.icons-mfd-png@1.1.0 ├── iobroker.icons-mfd-svg@1.1.0 ├── iobroker.icons-open-icon-library-png@0.1.2 ├── iobroker.icons-ultimate-png@1.0.1 ├── iobroker.influxdb@3.2.0 ├── iobroker.javascript@6.1.4 ├── iobroker.js-controller@4.0.23 ├── iobroker.kecontact@1.5.2 ├── iobroker.modbus@5.0.11 ├── iobroker.openweathermap@0.3.3 ├── iobroker.ping@1.5.3 ├── iobroker.pvforecast@2.3.0 ├── iobroker.rpi2@1.3.2 ├── iobroker.smartmeter@3.3.4 ├── iobroker.vis-icontwo@0.93.0 ├── iobroker.vis-inventwo@3.3.1 ├── iobroker.vis-timeandweather@1.2.2 ├── iobroker.vis@1.4.16 ├── iobroker.weatherunderground@3.4.2 └── iobroker.web@4.3.0 pi@iobroker:/opt/iobroker $Die BackitUp Instanz habe ich gestern schon neu installiert und die alte gelöscht, weil ich den Adapter sonst nicht ans laufen bekommen habe. Ich hatte den Gedanken mit der Neuinstallation auch, weil trotz upgrade mit der alten Installation gar nichts mehr ging, Es kam immer dieselbe Fehlermeldung.
Jetzt steht halt Backitup1. Aber das ist nur ein Schönheitsfehler. Die "1" dahinter wird scheinbar vom System vergeben und kann nicht geändert werden.Ich denke jetzt läuft wieder alles so wie es soll.
Gibt es noch was, wo ich noch reinschauen sollte ?Danke nochmal an alle, wo hier mit geholfen haben den Fehler zu finden
Gruß Andi
-
@kratan75 sagte in Backitup und Grafana:
Gibt es noch was, wo ich noch reinschauen sollte ?
Gib mal die Ausgabe von
iob diag -
Guten Morgen,
Ich habe auch ein Problem mit dem Backitup adapter und Grafana.
Diese Fehlermeldung bekomme ich Per E-mail:
BackItUp:
Your backup was not completely created. Please check the errors!!grafana: {"message":"Request failed with status code 500","name":"AxiosError","stack":"AxiosError: Request failed with status code 500\n at settle (/opt/iobroker/node_modules/iobroker.backitup/node_modules/axios/lib/core/settle.js:19:12)\n at IncomingMessage.handleStreamEnd (/opt/iobroker/node_modules/iobroker.backitup/node_modules/axios/lib/adapters/http.js:570:11)\n at IncomingMessage.emit (node:events:526:35)\n at IncomingMessage.emit (node:domain:489:12)\n at endReadableNT (node:internal/streams/readable:1359:12)\n at processTicksAndRejections (node:internal/process/task_queues:82:21)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":0,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"application/json, text/plain, /","Authorization":"Bearer ****","User-Agent":"axios/1.4.0","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","url":"http://192.168.178.211:3000/api/dashboards/uid/sF7d-FHZz","responseType":"json","httpsAgent":{"_events":{},"_eventsCount":2,"_maxListeners":100,"defaultPort":443,"protocol":"https:","options":{"rejectUnauthorized":true,"noDelay":true,"path":null},"requests":{},"sockets":{},"freeSockets":{},"keepAliveMsecs":1000,"keepAlive":false,"maxSockets":null,"maxFreeSockets":256,"scheduling":"lifo","maxTotalSockets":null,"totalSocketCount":0,"maxCachedSessions":100,"_sessionCache":{"map":{},"list":[]}}},"code":"ERR_BAD_RESPONSE","status":500}
Nun habe ich heute Morgen nochmal ein Backup von Hand gestartet und habe keine Fehlermeldung mehr.
Grafana, IoBroker und InfluxDB laufen auf dem selben system.
Nun kann es sein das ich die Meldung morgen wieder haben, ich dachte an eine überlastung des Systems. Jedoch langweilt sich die Kiste 24/7.hat jemand eine idee?
