UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Thomas Braun]

@kratan75 sagte in Backitup und Grafana:

|-/snap/core/14788 /dev/loop1     squashfs ro,nodev,relatime
|-/snap/core/14950 /dev/loop0     squashfs ro,nodev,relatime
|-/snap/minicom/1  /dev/loop2     squashfs ro,nodev,relatime

Was ist das?

[kratan75]

@thomas-braun
Wie gesagt, im Moment habe ich keine Zeit und erst nach dem Update gibt es diese Probleme. Ich werde mal mein SD- Kartenbackup auf einer Experimintal Kiste installieren wenn Zeit ist. Da bestätigt sich mal wieder die Aussage (never touch a running system).
Gibt es eine Anleitung für das Update ?

Gruß Andi

[kratan75]

@thomas-braun
Keine Ahnung. Wo hast das gesehen ?

Gruß Andi

[Thomas Braun]

@kratan75 sagte in Backitup und Grafana:

Da bestätigt sich mal wieder die Aussage (never touch a running system).

Im Gegenteil. Wenn es irgendwas bestätigt dann: Halte die Kiste auf aktuellem Stand.

Gibt es eine Anleitung für das Update ?

Ja, ich hatte da vor Urzeiten, als das Thema aktuell war was zu geschrieben.

[Thomas Braun]

@kratan75 sagte in Backitup und Grafana:

Keine Ahnung. Wo hast das gesehen ?

Im Output von iob diag

[kratan75]

@thomas-braun Das scheint irgendwas im Filesystem zu sein. Hängt das eventuell damit zusammen weil ich mal eine 64 GB Karte auf eine 128 GB Karte geklont habe ?

[Thomas Braun]

@kratan75

Das sieht eher wie eine Installation von minicom als snap aus. Fragt sich aber mal wieder warum... Gibt es nämlich auch über das Debian-Repo:

echad@chet:~ $ apt policy minicom
minicom:
  Installed: (none)
  Candidate: 2.8-2
  Version table:
     2.8-2 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages

[kratan75]

@thomas-braun Auf dem System läuft ein Volkszähler welcher seriell über USB kommuniziert. Ausserdem ein USB-> Modbus Converter.

Das hängt eventuell damit zusammen.
Hast du einen Link zum upgraden von Buster auf Bullseye ?

Wenn es am Wochenende weiter so schifft, kann ichs mal probieren. Vorher muß ich aber nochmal die SD-Karte Klonen damit nicht alles zerschossen wird.

[Thomas Braun]

@kratan75

https://forum.iobroker.net/topic/47214/upgrade-von-debian-10-buster-auf-11-bullseye

[kratan75]

@thomas-braun Okay Danke für den Link. Ich schau es mir die Tage mal an.
Nur noch eine Frage zur IP Adresse bzw. DHCP was hier angesprochen wird.

Kann ich unter

/etc/systemd/system/dhcpcd.service.d/wait.conf

folgenden Code für eine feste IP Adresse verwenden ?

interface eth0
static ip_address=192.168.3.162/24
static routers=192.168.3.1
static domain_name_servers=192.168.3.1 8.8.8.8 fd51:42f8:caae:d92e::1

Ich kann keine DHCP Adresse gebrauchen, weil dieses System direkt mit anderen Systemen Kommunizieren muss. Daher möchte ich dort auf jeden Fall eine feste IP drinnen haben.

Im Buster war das ja unter

/etc/dhcpcd.conf

hinterlegt.

[Thomas Braun]

@kratan75

Kann ich dir nicht sagen, ich werkel hier mit hostnames und DHCP.

[kratan75]

@thomas-braun Guten Morgen
Also ich habe mich gestern tatsächlich spät Abends noch durchgerungen einen experimentier-Pi aufzusetzen und das Update von Buster auf Bullseye dort zu installieren.
Resultat ist, das dies wohl anscheinend tatsächlich des Rätsels Lösung war. Das BackitUp läuft nun ohne Probleme durch. Danke nochmal für den Tipp. Trotzdem habe ich festgestellt das immer noch Fehlermeldungen in der NPM Liste stehen welche ich mir nicht erklären kann, weil alle Erweiterungen exakt auf diesen Stand sind welche im Log stehen.

Mit dazu habe ich nochmal einen neuen API Key für Grafana erstellt, der hatte auch noch Probleme gemacht.

BackItUp:
Eine neue iobroker Sicherung wurde am 15. April 2023 um 02:40 Uhr erstellt, und nach 85.214.205.194/ via FTP kopiert/verschoben.

Hier mal die Logeintrage von npm (/home/iobroker/.npm/_logs/2023-04-15T07_49_11_023Z-debug-0.log)

 verbose cli /usr/bin/node /usr/bin/npm
1 info using npm@9.5.1
2 info using node@v18.16.0
3 timing npm:load:whichnode Completed in 3ms
4 timing config:load:defaults Completed in 6ms
5 timing config:load:file:/usr/lib/node_modules/npm/npmrc Completed in 16ms
6 timing config:load:builtin Completed in 17ms
7 timing config:load:cli Completed in 25ms
8 timing config:load:env Completed in 1ms
9 timing config:load:file:/opt/iobroker/node_modules/iobroker.backitup/.npmrc Completed in 1ms
10 timing config:load:project Completed in 10ms
11 timing config:load:file:/home/iobroker/.npmrc Completed in 0ms
12 timing config:load:user Completed in 0ms
13 timing config:load:file:/usr/etc/npmrc Completed in 0ms
14 timing config:load:global Completed in 1ms
15 timing config:load:setEnvs Completed in 3ms
16 timing config:load Completed in 66ms
17 timing npm:load:configload Completed in 66ms
18 timing npm:load:mkdirpcache Completed in 1ms
19 timing npm:load:mkdirplogs Completed in 1ms
20 verbose title npm list
21 verbose argv "list"
22 timing npm:load:setTitle Completed in 4ms
23 timing config:load:flatten Completed in 11ms
24 timing npm:load:display Completed in 13ms
25 verbose logfile logs-max:10 dir:/home/iobroker/.npm/_logs/2023-04-14T22_34_18_626Z-
26 verbose logfile /home/iobroker/.npm/_logs/2023-04-14T22_34_18_626Z-debug-0.log
27 timing npm:load:logFile Completed in 18ms
28 timing npm:load:timers Completed in 0ms
29 timing npm:load:configScope Completed in 0ms
30 timing npm:load Completed in 108ms
31 timing arborist:ctor Completed in 2ms
32 silly logfile start cleaning logs, removing 1 files
33 silly logfile done cleaning log files
34 timing command:list Completed in 102ms
35 verbose stack Error: missing: @alcalzone/release-script-plugin-iobroker@^3.5.9, required by iobroker.backitup@2.6.16
35 verbose stack missing: @alcalzone/release-script-plugin-license@^3.5.9, required by iobroker.backitup@2.6.16
35 verbose stack missing: @alcalzone/release-script@^3.5.9, required by iobroker.backitup@2.6.16
35 verbose stack missing: @googleapis/drive@^4.0.2, required by iobroker.backitup@2.6.16
35 verbose stack missing: @iobroker/adapter-core@^2.6.7, required by iobroker.backitup@2.6.16
35 verbose stack missing: @iobroker/testing@^4.1.0, required by iobroker.backitup@2.6.16
35 verbose stack missing: chai@^4.3.7, required by iobroker.backitup@2.6.16
35 verbose stack missing: dropbox-v2-api@^2.5.10, required by iobroker.backitup@2.6.16
35 verbose stack missing: express@^4.18.2, required by iobroker.backitup@2.6.16
35 verbose stack missing: ftp@^0.3.10, required by iobroker.backitup@2.6.16
35 verbose stack missing: google-auth-library@^8.7.0, required by iobroker.backitup@2.6.16
35 verbose stack missing: gulp@^4.0.2, required by iobroker.backitup@2.6.16
35 verbose stack missing: mocha@^10.2.0, required by iobroker.backitup@2.6.16
35 verbose stack missing: node-wol@^0.1.1, required by iobroker.backitup@2.6.16
35 verbose stack missing: onedrive-api@^1.0.7, required by iobroker.backitup@2.6.16
35 verbose stack missing: request@^2.88.2, required by iobroker.backitup@2.6.16
35 verbose stack missing: tar-fs@^2.1.1, required by iobroker.backitup@2.6.16
35 verbose stack missing: webdav@^4.11.2, required by iobroker.backitup@2.6.16
35 verbose stack     at LS.exec (/usr/lib/node_modules/npm/lib/commands/ls.js:203:9)
35 verbose stack     at async module.exports (/usr/lib/node_modules/npm/lib/cli.js:134:5)
36 verbose cwd /opt/iobroker/node_modules/iobroker.backitup
37 verbose Linux 6.1.21-v8+
38 verbose node v18.16.0
39 verbose npm  v9.5.1
40 error code ELSPROBLEMS

Hier der Stand seit heute Morgen (iob diag):

Skript v.2023-04-02

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.5
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 09:45:53 up  8:06,  1 user,  load average: 0.85, 0.67, 0.63
CPU threads: 4

*** Time and Time Zones ***
               Local time: Sat 2023-04-15 09:45:53 CEST
           Universal time: Sat 2023-04-15 07:45:53 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c                                                                                                                                                              spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        1.1G        1.7G        0.0K        924M        2.7G
Swap:            99M          0B         99M
Total:          3.9G        1.1G        1.8G

         3794 M total memory
         1124 M used memory
         1232 M active memory
          650 M inactive memory
         1745 M free memory
          100 M buffer memory
          824 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       30G  5.2G   23G  19% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M 1008K  758M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/loop0     squashfs  384K  384K     0 100% /snap/minicom/1
/dev/loop2     squashfs   99M   99M     0 100% /snap/core/14950
/dev/loop1     squashfs   99M   99M     0 100% /snap/core/14788
/dev/mmcblk0p1 vfat      253M   51M  202M  20% /boot
tmpfs          tmpfs     380M  4.0K  380M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Apr 15 01:38:56 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0                                                                                                                                                              snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena                                                                                                                                                             ble_hdmi=1  smsc95xx.macaddr=E4:5F:01:A9:73:27 vc_mem.mem_base=0x3ec00000 vc_mem                                                                                                                                                             .mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=a62f624d-0                                                                                                                                                             2 rootfstype=ext4 fsck.repair=yes rootwait
[Sat Apr 15 01:38:57 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered                                                                                                                                                              data mode. Quota mode: none.
[Sat Apr 15 01:38:57 2023] VFS: Mounted root (ext4 filesystem) readonly on devic                                                                                                                                                             e 179:2.
[Sat Apr 15 01:38:59 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET             SOURCE         FSTYPE   OPTIONS
/                  /dev/mmcblk0p2 ext4     rw,noatime
|-/snap/minicom/1  /dev/loop0     squashfs ro,nodev,relatime,errors=continue
|-/snap/core/14950 /dev/loop2     squashfs ro,nodev,relatime,errors=continue
|-/snap/core/14788 /dev/loop1     squashfs ro,nodev,relatime,errors=continue
`-/boot            /dev/mmcblk0p1 vfat     rw,relatime,fmask=0022,dmask=0022,cod                                                                                                                                                             epage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
1.2G    /var/
535M    /var/lib
318M    /var/log
294M    /var/lib/snapd
200M    /var/cache

/opt/iobroker/backups:
209M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
299M    /opt/iobroker/iobroker-data/
252M    /opt/iobroker/iobroker-data/files
78M     /opt/iobroker/iobroker-data/files/icons-open-icon-library-png
51M     /opt/iobroker/iobroker-data/files/javascript.admin
35M     /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
9.1M    /opt/iobroker/iobroker-data/objects.jsonl
6.9M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.de0231c                                                                                                                                                             9.chunk.js.map
6.6M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.8083c40d.j                                                                                                                                                             s.map
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-n                                                                                                                                                             ode_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_                                                                                                                                                             iobr-99c23e.847b8ad9.chunk.js.map
4.9M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/848.7424922                                                                                                                                                             d.chunk.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1

nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u3 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  4.0.23
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.1               : backitup              : iobroker                                 -  enabled
+ system.adapter.countdown.0              : countdown             : iobroker                                 -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
+ system.adapter.email.0                  : email                 : iobroker                                 -  enabled
+ system.adapter.fronius.0                : fronius               : iobroker                                 -  enabled
  system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker                                 -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : iobroker                                 -  enabled
  system.adapter.icons-material-png.0     : icons-material-png    : iobroker                                 -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : iobroker                                 -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : iobroker                                 -  enabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker                                 -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : iobroker                                 -  enabled
+ system.adapter.influxdb.1               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
+ system.adapter.kecontact.0              : kecontact             : iobroker                                 -  enabled
+ system.adapter.modbus.0                 : modbus                : iobroker                                 -  enabled
+ system.adapter.modbus.1                 : modbus                : iobroker                                 -  enabled
+ system.adapter.modbus.2                 : modbus                : iobroker                                 -  enabled
+ system.adapter.modbus.3                 : modbus                : iobroker                                 -  enabled
  system.adapter.openweathermap.0         : openweathermap        : iobroker                                 -  enabled
+ system.adapter.ping.0                   : ping                  : iobroker                                 -  enabled
+ system.adapter.pvforecast.0             : pvforecast            : iobroker                                 -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : iobroker                                 -  enabled
+ system.adapter.smartmeter.0             : smartmeter            : iobroker                                 -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : iobroker                                 -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker                                 -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobroker                                 -  enabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.1               : influxdb              : iobroker                                 -  enabled, port: 8086
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "backitup"     : 2.6.16   , installed 2.6.16
Adapter    "countdown"    : 1.2.5    , installed 1.2.5
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "email"        : 1.1.4    , installed 1.1.4
Adapter    "fronius"      : 1.1.3    , installed 1.1.3
Adapter    "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.23 [Updatable]
Adapter    "kecontact"    : 1.5.2    , installed 1.5.2
Adapter    "modbus"       : 5.0.11   , installed 5.0.11
Adapter    "openweathermap": 0.3.3   , installed 0.3.3
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pvforecast"   : 2.3.0    , installed 2.3.0
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartmeter"   : 3.3.4    , installed 3.3.4
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-icontwo"  : 0.93.0   , installed 0.93.0
Adapter    "vis-inventwo" : 3.3.1    , installed 3.3.1
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "weatherunderground": 3.4.2, installed 3.4.2
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

Objects and States
Please stand by - This may take a while
Objects:        3685
States:         3195

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspbian.org/raspbian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 https://apt.grafana.com stable InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:6 https://repos.influxdata.com/debian stable InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       16452      759/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       16459      759/iobroker.js-con
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          1984       539/sshd: /usr/sbin
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      999        13037      664/influxd
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       14798      784/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       15159      1040/io.web.0
tcp6       0      0 :::8086                 :::*                    LISTEN      999        14717      664/influxd
tcp6       0      0 :::22                   :::*                    LISTEN      0          1986       539/sshd: /usr/sbin
tcp6       0      0 :::3000                 :::*                    LISTEN      109        16490      659/grafana
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12772      390/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          14214      658/dhcpcd
udp        0      0 0.0.0.0:39039           0.0.0.0:*                           1001       30278      2683/io.kecontact.0
udp        0      0 0.0.0.0:55611           0.0.0.0:*                           108        12774      390/avahi-daemon: r
udp        0      0 0.0.0.0:7090            0.0.0.0:*                           1001       27137      2683/io.kecontact.0
udp        0      0 0.0.0.0:7092            0.0.0.0:*                           1001       27138      2683/io.kecontact.0
udp6       0      0 :::5353                 :::*                                108        12773      390/avahi-daemon: r
udp6       0      0 :::34479                :::*                                108        12775      390/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-04-15 09:44:33.791  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:44:39.750  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:44:45.639  - info: smartmeter.0 (2608) Received 13 values, 5 updated
2023-04-15 09:44:51.506  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:44:57.331  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:45:03.117  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:45:08.899  - info: smartmeter.0 (2608) Received 13 values, 4 updated
2023-04-15 09:45:14.601  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:45:20.353  - info: smartmeter.0 (2608) Received 13 values, 5 updated
2023-04-15 09:45:26.075  - info: smartmeter.0 (2608) Received 13 values, 5 updated
2023-04-15 09:45:31.800  - info: smartmeter.0 (2608) Received 13 values, 5 updated
2023-04-15 09:45:37.652  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:45:43.530  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:45:49.296  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:45:55.025  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:46:00.782  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:46:06.467  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:46:12.207  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:46:17.941  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:46:23.605  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:46:29.256  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:46:34.946  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:46:40.701  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:46:46.529  - info: smartmeter.0 (2608) Received 13 values, 6 updated
2023-04-15 09:46:52.261  - info: smartmeter.0 (2608) Received 13 values, 6 updated

Und hier die npm ls Ausgabe:

pi@iobroker:~ $ cd /opt/iobroker/node_modules/iobroker.backitup
pi@iobroker:/opt/iobroker/node_modules/iobroker.backitup $ npm ls
npm ERR! code ELSPROBLEMS
npm ERR! missing: @alcalzone/release-script-plugin-iobroker@^3.5.9, required by iobroker.backitup@2.6.16
npm ERR! missing: @alcalzone/release-script-plugin-license@^3.5.9, required by iobroker.backitup@2.6.16
npm ERR! missing: @alcalzone/release-script@^3.5.9, required by iobroker.backitup@2.6.16
npm ERR! missing: @googleapis/drive@^4.0.2, required by iobroker.backitup@2.6.16
npm ERR! missing: @iobroker/adapter-core@^2.6.7, required by iobroker.backitup@2.6.16
npm ERR! missing: @iobroker/testing@^4.1.0, required by iobroker.backitup@2.6.16
npm ERR! missing: chai@^4.3.7, required by iobroker.backitup@2.6.16
npm ERR! missing: dropbox-v2-api@^2.5.10, required by iobroker.backitup@2.6.16
npm ERR! missing: express@^4.18.2, required by iobroker.backitup@2.6.16
npm ERR! missing: ftp@^0.3.10, required by iobroker.backitup@2.6.16
npm ERR! missing: google-auth-library@^8.7.0, required by iobroker.backitup@2.6.16
npm ERR! missing: gulp@^4.0.2, required by iobroker.backitup@2.6.16
npm ERR! missing: mocha@^10.2.0, required by iobroker.backitup@2.6.16
npm ERR! missing: node-wol@^0.1.1, required by iobroker.backitup@2.6.16
npm ERR! missing: onedrive-api@^1.0.7, required by iobroker.backitup@2.6.16
npm ERR! missing: request@^2.88.2, required by iobroker.backitup@2.6.16
npm ERR! missing: tar-fs@^2.1.1, required by iobroker.backitup@2.6.16
npm ERR! missing: webdav@^4.11.2, required by iobroker.backitup@2.6.16
iobroker.backitup@2.6.16 /opt/iobroker/node_modules/iobroker.backitup
├── UNMET DEPENDENCY @alcalzone/release-script-plugin-iobroker@^3.5.9
├── UNMET DEPENDENCY @alcalzone/release-script-plugin-license@^3.5.9
├── UNMET DEPENDENCY @alcalzone/release-script@^3.5.9
├── UNMET DEPENDENCY @googleapis/drive@^4.0.2
├── UNMET DEPENDENCY @iobroker/adapter-core@^2.6.7
├── UNMET DEPENDENCY @iobroker/testing@^4.1.0
├── axios@1.3.5
├── UNMET DEPENDENCY chai@^4.3.7
├── UNMET DEPENDENCY dropbox-v2-api@^2.5.10
├── UNMET DEPENDENCY express@^4.18.2
├── fs-extra@11.1.1
├── UNMET DEPENDENCY ftp@^0.3.10
├── UNMET DEPENDENCY google-auth-library@^8.7.0
├── UNMET DEPENDENCY gulp@^4.0.2
├── UNMET DEPENDENCY mocha@^10.2.0
├── node-schedule@2.1.1
├── UNMET DEPENDENCY node-wol@^0.1.1
├── UNMET DEPENDENCY onedrive-api@^1.0.7
├── UNMET DEPENDENCY request@^2.88.2
├── UNMET DEPENDENCY tar-fs@^2.1.1
└── UNMET DEPENDENCY webdav@^4.11.2


npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2023-04-15T07_49_11_023Z-debug-0.log
pi@iobroker:/opt/iobroker/node_modules/iobroker.backitup $

Es läuft so jetzt alles wieder problemlos.
Ich hätte aber gerne ein sauberes System. Was kann das noch sein ?

Gruß Andi

[Thomas Braun]

@kratan75

Du stehst im falschen Verzeichnis.

cd /opt/iobroker
npm ls

[Thomas Braun]

@kratan75

Zieh den js-controller noch auf die aktuelle Version und installier den Backitup-Adapter nochmal neu.

[simatec]

@kratan75 Aber bitte dann Backitup nicht nur in den Instanzen, sondern auch im Tab Adapter vorher löschen

[kratan75]

@thomas-braun Hallo Thomas, also wenn ich in dieses Verzeichiss wechsel sieht alles gut aus.

pi@iobroker:~ $ cd /opt/iobroker
pi@iobroker:/opt/iobroker $ npm ls
iobroker.inst@3.0.0 /opt/iobroker
├── iobroker.admin@6.3.5
├── iobroker.backitup@2.6.16
├── iobroker.countdown@1.2.5
├── iobroker.discovery@3.1.0
├── iobroker.email@1.1.4
├── iobroker.fronius@1.1.3
├── iobroker.icons-addictive-flavour-png@0.1.0
├── iobroker.icons-icons8@0.0.1
├── iobroker.icons-material-png@0.1.0
├── iobroker.icons-mfd-png@1.1.0
├── iobroker.icons-mfd-svg@1.1.0
├── iobroker.icons-open-icon-library-png@0.1.2
├── iobroker.icons-ultimate-png@1.0.1
├── iobroker.influxdb@3.2.0
├── iobroker.javascript@6.1.4
├── iobroker.js-controller@4.0.23
├── iobroker.kecontact@1.5.2
├── iobroker.modbus@5.0.11
├── iobroker.openweathermap@0.3.3
├── iobroker.ping@1.5.3
├── iobroker.pvforecast@2.3.0
├── iobroker.rpi2@1.3.2
├── iobroker.smartmeter@3.3.4
├── iobroker.vis-icontwo@0.93.0
├── iobroker.vis-inventwo@3.3.1
├── iobroker.vis-timeandweather@1.2.2
├── iobroker.vis@1.4.16
├── iobroker.weatherunderground@3.4.2
└── iobroker.web@4.3.0

pi@iobroker:/opt/iobroker $

Die BackitUp Instanz habe ich gestern schon neu installiert und die alte gelöscht, weil ich den Adapter sonst nicht ans laufen bekommen habe. Ich hatte den Gedanken mit der Neuinstallation auch, weil trotz upgrade mit der alten Installation gar nichts mehr ging, Es kam immer dieselbe Fehlermeldung.

Jetzt steht halt Backitup1. Aber das ist nur ein Schönheitsfehler. Die "1" dahinter wird scheinbar vom System vergeben und kann nicht geändert werden.

Ich denke jetzt läuft wieder alles so wie es soll.
Gibt es noch was, wo ich noch reinschauen sollte ?

Danke nochmal an alle, wo hier mit geholfen haben den Fehler zu finden :-)

Gruß Andi

[Thomas Braun]

@kratan75 sagte in Backitup und Grafana:

Gibt es noch was, wo ich noch reinschauen sollte ?

Gib mal die Ausgabe von

iob diag

[Gr33n93]

Guten Morgen,

Ich habe auch ein Problem mit dem Backitup adapter und Grafana.

Diese Fehlermeldung bekomme ich Per E-mail:

BackItUp:
Your backup was not completely created. Please check the errors!!

grafana: {"message":"Request failed with status code 500","name":"AxiosError","stack":"AxiosError: Request failed with status code 500\n at settle (/opt/iobroker/node_modules/iobroker.backitup/node_modules/axios/lib/core/settle.js:19:12)\n at IncomingMessage.handleStreamEnd (/opt/iobroker/node_modules/iobroker.backitup/node_modules/axios/lib/adapters/http.js:570:11)\n at IncomingMessage.emit (node:events:526:35)\n at IncomingMessage.emit (node:domain:489:12)\n at endReadableNT (node:internal/streams/readable:1359:12)\n at processTicksAndRejections (node:internal/process/task_queues:82:21)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":0,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"application/json, text/plain, /","Authorization":"Bearer ****","User-Agent":"axios/1.4.0","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","url":"http://192.168.178.211:3000/api/dashboards/uid/sF7d-FHZz","responseType":"json","httpsAgent":{"_events":{},"_eventsCount":2,"_maxListeners":100,"defaultPort":443,"protocol":"https:","options":{"rejectUnauthorized":true,"noDelay":true,"path":null},"requests":{},"sockets":{},"freeSockets":{},"keepAliveMsecs":1000,"keepAlive":false,"maxSockets":null,"maxFreeSockets":256,"scheduling":"lifo","maxTotalSockets":null,"totalSocketCount":0,"maxCachedSessions":100,"_sessionCache":{"map":{},"list":[]}}},"code":"ERR_BAD_RESPONSE","status":500}

Nun habe ich heute Morgen nochmal ein Backup von Hand gestartet und habe keine Fehlermeldung mehr.
Grafana, IoBroker und InfluxDB laufen auf dem selben system.
Nun kann es sein das ich die Meldung morgen wieder haben, ich dachte an eine überlastung des Systems. Jedoch langweilt sich die Kiste 24/7.

hat jemand eine idee?