NEWS
Backuperstellungproblem --> JavaScript heap out of memory
Einsteigerfragen
63
Beiträge
7
Kommentatoren
5.4k
Aufrufe
7
Watching
-
@codierknecht said in Backuperstellungproblem --> JavaScript heap out of memory:
2.) Mit 4 GB RAM ist Deine Kiste ganz offensichtlich zu klein. Da Du uns aber nur einen Teil der Diagnose zeigst, sieht man nicht was da so alles läuft. Der Backup-Prozess hat nicht genügend Speicher zur Verfügung
ich dachte ich hätte alles gepostet. sorry war keine absicht. läuft sonst nur noch fhem in minimal config
@tklein sagte in Backuperstellungproblem --> JavaScript heap out of memory:
ich dachte ich hätte alles gepostet.
Nein, in der Ausgabe von
iob diaggibt es extra dafür entsprechende Markierungen. -
@tklein sagte in Backuperstellungproblem --> JavaScript heap out of memory:
das klingt mit meinen skripten etc nach echt viel arbeit.
Warum? Die liegen im Backup drin.
Und um die OS-Update-Nummer kommst du alleine deswegen nicht herum, weil dein Buster abgekündigt wurde und das EndOfLife erreicht hat. -
@thomas-braun viele skripte unter pi/ sowie installation von services. ob ich das so alles wieder hinbekomme....
@tklein sagte in Backuperstellungproblem --> JavaScript heap out of memory:
viele skripte unter pi/ sowie installation von services.
Zumindest aus dem ~ kannst du ja auch ein Backup ziehen.
Services würde ich basierend auf dem default individuell einstellen. Kann bzw. sollte ja eigentlich nicht viel sein. -
@codierknecht said in Backuperstellungproblem --> JavaScript heap out of memory:
2.) Mit 4 GB RAM ist Deine Kiste ganz offensichtlich zu klein. Da Du uns aber nur einen Teil der Diagnose zeigst, sieht man nicht was da so alles läuft. Der Backup-Prozess hat nicht genügend Speicher zur Verfügung
ich dachte ich hätte alles gepostet. sorry war keine absicht. läuft sonst nur noch fhem in minimal config
@tklein sagte in Backuperstellungproblem --> JavaScript heap out of memory:
läuft sonst nur noch fhem in minimal config
Was ein FHEM so braucht weiß ich nicht.
Zusammen mit@tklein sagte in Backuperstellungproblem --> JavaScript heap out of memory:
viele skripte unter pi/ sowie installation von services
könnte das aber in Summe - zusammen mit ggf. vielen Adapter-Instanzen - Deinen Pi an seine Grenzen bringen.
4 GB sind halt nicht wirklich üppig ... und erfahrungsgemäß kommen beim ioBroker im Laufe der Zeit immer neue Adapter hinzu, die dann irgendwann das Fass zum Überlaufen bringen. -
@tklein sagte in Backuperstellungproblem --> JavaScript heap out of memory:
läuft sonst nur noch fhem in minimal config
Was ein FHEM so braucht weiß ich nicht.
Zusammen mit@tklein sagte in Backuperstellungproblem --> JavaScript heap out of memory:
viele skripte unter pi/ sowie installation von services
könnte das aber in Summe - zusammen mit ggf. vielen Adapter-Instanzen - Deinen Pi an seine Grenzen bringen.
4 GB sind halt nicht wirklich üppig ... und erfahrungsgemäß kommen beim ioBroker im Laufe der Zeit immer neue Adapter hinzu, die dann irgendwann das Fass zum Überlaufen bringen.@codierknecht ein updates bezüglich der diagnose kommt noch. hatte einen screen gemacht während er lief. kannt das tool noch gar nicht
-
hier nun der vollständige output vom tool:
Skript v.2023-04-02 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.2 Architecture : armv7l Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 10 (buster) Release: 10 Codename: buster PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 12:39:46 up 1:21, 2 users, load average: 1.39, 1.82, 1.93 CPU threads: 4 *** Time and Time Zones *** Local time: Tue 2023-04-11 12:39:47 CEST Universal time: Tue 2023-04-11 10:39:47 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.8G 490M 5.0M 581M 1.2G Swap: 8.2G 401M 7.8G Total: 12G 3.2G 8.3G 3837 M total memory 2761 M used memory 694 M active memory 2528 M inactive memory 494 M free memory 127 M buffer memory 453 M swap cache 8191 M total swap 401 M used swap 7790 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 220G 28G 184G 14% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 1.9G 8.6M 1.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/sda1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Apr 11 11:18:13 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:54:0B:45 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=74cbdb6a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Tue Apr 11 11:18:15 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Tue Apr 11 11:18:15 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Tue Apr 11 11:18:17 2023] EXT4-fs (sda2): re-mounted. Opts: (null) Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 6.6G /var/ 1.4G /var/cache/apt 1.4G /var/cache 1.3G /var/cache/apt/archives 826M /var/lib /opt/iobroker/backups: 1.8G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 2.0G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 716M /opt/iobroker/iobroker-data/files/vis-2-beta 680M /opt/iobroker/iobroker-data/files/vis-2-beta/static 678M /opt/iobroker/iobroker-data/files/vis-2-beta/static/js The five largest files in iobroker-data are: 64M /opt/iobroker/iobroker-data/objects.jsonl 50M /opt/iobroker/iobroker-data/states.jsonl 33M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map 27M /opt/iobroker/iobroker-data/objects.json.migrated 27M /opt/iobroker/iobroker-data/objects.json.bak.migrated *** NodeJS-Installation *** /usr/bin/nodejs v16.19.0 /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 nodejs: Installed: 16.19.0-deb-1nodesource1 Candidate: 16.19.1-deb-1nodesource1 Version table: 16.19.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x buster/main armhf Packages *** 16.19.0-deb-1nodesource1 100 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 5 Adapter State + system.adapter.accuweather.0 : accuweather : raspberrypi-iob - enabled + system.adapter.admin.0 : admin : raspberrypi-iob - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi-iob - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi-iob - enabled system.adapter.apple-find-me.0 : apple-find-me : raspberrypi-iob - disabled system.adapter.apple-find-me.1 : apple-find-me : raspberrypi-iob - disabled system.adapter.apple-find-me.2 : apple-find-me : raspberrypi-iob - disabled + system.adapter.backitup.0 : backitup : raspberrypi-iob - enabled system.adapter.bmw.0 : bmw : raspberrypi-iob - disabled system.adapter.bring.0 : bring : raspberrypi-iob - disabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi-iob - enabled + system.adapter.cloud.0 : cloud : raspberrypi-iob - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: raspberrypi-iob - disabled system.adapter.daswetter.0 : daswetter : raspberrypi-iob - disabled system.adapter.device-reminder.0 : device-reminder : raspberrypi-iob - disabled + system.adapter.device-watcher.0 : device-watcher : raspberrypi-iob - enabled system.adapter.devices.0 : devices : raspberrypi-iob - enabled system.adapter.discovery.0 : discovery : raspberrypi-iob - disabled system.adapter.dwd.0 : dwd : raspberrypi-iob - enabled + system.adapter.echarts.0 : echarts : raspberrypi-iob - enabled + system.adapter.email.0 : email : raspberrypi-iob - enabled + system.adapter.enigma2.1 : enigma2 : raspberrypi-iob - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi-iob - disabled system.adapter.feiertage.0 : feiertage : raspberrypi-iob - enabled + system.adapter.fhem.0 : fhem : raspberrypi-iob - enabled, port: 7072 + system.adapter.firetv.0 : firetv : raspberrypi-iob - enabled system.adapter.flot.0 : flot : raspberrypi-iob - enabled system.adapter.followthesun.0 : followthesun : raspberrypi-iob - disabled system.adapter.geofency.0 : geofency : raspberrypi-iob - disabled, port: 7999, bind: 0.0.0.0 + system.adapter.govee.0 : govee : raspberrypi-iob - enabled system.adapter.habpanel.0 : habpanel : raspberrypi-iob - enabled + system.adapter.ham.0 : ham : raspberrypi-iob - enabled + system.adapter.history.0 : history : raspberrypi-iob - enabled system.adapter.homekit-controller.0 : homekit-controller : raspberrypi-iob - disabled system.adapter.ical.0 : ical : raspberrypi-iob - enabled system.adapter.ico-cloud.0 : ico-cloud : raspberrypi-iob - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi-iob - enabled, port: 8086 + system.adapter.info.0 : info : raspberrypi-iob - enabled system.adapter.intex.0 : intex : raspberrypi-iob - disabled + system.adapter.iot.1 : iot : raspberrypi-iob - enabled + system.adapter.javascript.0 : javascript : raspberrypi-iob - enabled + system.adapter.linux-control.0 : linux-control : raspberrypi-iob - enabled system.adapter.meater.0 : meater : raspberrypi-iob - disabled system.adapter.meross.0 : meross : raspberrypi-iob - disabled system.adapter.milight-smart-light.0 : milight-smart-light : raspberrypi-iob - disabled system.adapter.milight-smart-light.2 : milight-smart-light : raspberrypi-iob - disabled system.adapter.milight-smart-light.3 : milight-smart-light : raspberrypi-iob - disabled system.adapter.milight-smart-light.4 : milight-smart-light : raspberrypi-iob - disabled + system.adapter.mqtt.0 : mqtt : raspberrypi-iob - enabled, port: 1888, bind: 192.168.0.20 system.adapter.netatmo-crawler.0 : netatmo-crawler : raspberrypi-iob - enabled + system.adapter.nina.0 : nina : raspberrypi-iob - enabled system.adapter.openweathermap.0 : openweathermap : raspberrypi-iob - disabled system.adapter.parcel.0 : parcel : raspberrypi-iob - disabled system.adapter.pegelalarm.0 : pegelalarm : raspberrypi-iob - enabled + system.adapter.ping.0 : ping : raspberrypi-iob - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi-iob - enabled + system.adapter.pushover.0 : pushover : raspberrypi-iob - enabled + system.adapter.reolink.0 : reolink : raspberrypi-iob - enabled + system.adapter.ring.0 : ring : raspberrypi-iob - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi-iob - enabled system.adapter.sayit.0 : sayit : raspberrypi-iob - disabled system.adapter.schoolfree.0 : schoolfree : raspberrypi-iob - enabled + system.adapter.shelly.0 : shelly : raspberrypi-iob - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi-iob - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.smartcontrol.0 : smartcontrol : raspberrypi-iob - disabled + system.adapter.sonoff.0 : sonoff : raspberrypi-iob - enabled, port: 1883, bind: 0.0.0.0 system.adapter.sonos.0 : sonos : raspberrypi-iob - disabled + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi-iob - enabled + system.adapter.spotify-premium.0 : spotify-premium : raspberrypi-iob - enabled system.adapter.sql.0 : sql : raspberrypi-iob - disabled, port: 3306 system.adapter.systeminfo.0 : systeminfo : raspberrypi-iob - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi-iob - enabled system.adapter.terminal.0 : terminal : raspberrypi-iob - disabled, port: 8089, bind: 192.168.0.20, run as: admin + system.adapter.text2command.0 : text2command : raspberrypi-iob - enabled system.adapter.tr-064.0 : tr-064 : raspberrypi-iob - disabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi-iob - enabled + system.adapter.tuya.0 : tuya : raspberrypi-iob - enabled system.adapter.twinkly.0 : twinkly : raspberrypi-iob - disabled system.adapter.vis-2-beta.0 : vis-2-beta : raspberrypi-iob - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi-iob - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi-iob - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi-iob - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi-iob - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi-iob - enabled system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi-iob - disabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi-iob - enabled system.adapter.vis-weather.0 : vis-weather : raspberrypi-iob - enabled system.adapter.vis.0 : vis : raspberrypi-iob - disabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi-iob - disabled + system.adapter.web.0 : web : raspberrypi-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.wled.0 : wled : raspberrypi-iob - disabled + system.adapter.yahka.0 : yahka : raspberrypi-iob - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi-iob - enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2219042-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi-iob - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.fhem.0 : fhem : raspberrypi-iob - enabled, port: 7072 + system.adapter.influxdb.0 : influxdb : raspberrypi-iob - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : raspberrypi-iob - enabled, port: 1888, bind: 192.168.0.20 + system.adapter.shelly.0 : shelly : raspberrypi-iob - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi-iob - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspberrypi-iob - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi-iob - enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2219042-if00 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.2.1 , installed 1.2.1 Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alarm" : 3.3.9 , installed 3.3.9 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "alias-manager": 1.2.4 , installed 1.2.4 Adapter "apple-find-me": 0.0.14 , installed 0.0.14 Adapter "backitup" : 2.6.16 , installed 2.6.16 Adapter "ble" : 0.13.0 , installed 0.13.0 Adapter "bmw" : 2.5.7 , installed 2.5.7 Adapter "bring" : 1.8.1 , installed 1.8.1 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.3.0 , installed 4.3.0 Adapter "coronavirus-statistics": 0.8.7, installed 0.8.7 Adapter "cul" : 2.0.2 , installed 2.0.2 Adapter "daswetter" : 3.1.7 , installed 3.1.7 Adapter "deconz" : 1.3.21 , installed 1.3.21 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "device-watcher": 2.6.1 , installed 2.6.1 Adapter "devices" : 1.1.2 , installed 1.1.2 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.3 , installed 2.8.3 Adapter "echarts" : 1.0.12 , installed 1.0.12 Adapter "email" : 1.1.4 , installed 1.1.4 Adapter "fb-checkpresence": 1.1.25, installed 1.1.25 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "fhem" : 1.6.3 , installed 1.6.3 Adapter "firetv" : 1.0.0 , installed 1.0.0 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "followthesun" : 0.4.1 , installed 0.4.1 Adapter "fritzbox" : 0.2.1 , installed 0.2.1 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "homekit-controller": 0.5.8, installed 0.5.8 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "ico-cloud" : 1.0.0 , installed 1.0.0 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "intex" : 0.0.7 , installed 0.0.7 Adapter "iot" : 1.14.2 , installed 1.14.2 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "linux-control": 1.1.3 , installed 1.1.3 Adapter "luftdaten" : 2.2.4 , installed 2.2.4 Adapter "mclighting" : 0.1.2 , installed 0.1.2 Adapter "meross" : 1.14.0 , installed 1.14.0 Adapter "milight" : 0.3.6 , installed 0.3.6 Adapter "milight-smart-light": 1.2.2, installed 1.2.2 Adapter "mqtt" : 4.0.7 , installed 4.0.7 Adapter "mysensors" : 3.0.0 , installed 3.0.0 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "openweathermap": 0.3.3 , installed 0.3.3 Adapter "parcel" : 0.0.25 , installed 0.0.25 Adapter "pegelalarm" : 1.3.0 , installed 1.3.0 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "radar2" : 2.0.3 , installed 2.0.3 Adapter "rest-api" : 1.0.4 , installed 1.0.4 Adapter "rflink" : 2.1.6 , installed 2.1.6 Adapter "ring" : 3.2.2 , installed 3.2.2 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "sayit" : 1.12.3 , installed 1.12.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "schoolfree" : 1.1.1 , installed 1.1.1 Adapter "shelly" : 6.3.1 , installed 6.3.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartcontrol" : 1.3.2 , installed 1.3.2 Adapter "socketio" : 4.2.0 , installed 6.3.3 Adapter "sonoff" : 2.5.1 , installed 2.5.1 Adapter "sonos" : 2.2.3 , installed 2.2.3 Adapter "spotify-premium": 1.2.1 , installed 1.2.1 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "systeminfo" : 0.3.1 , installed 0.3.1 Adapter "tankerkoenig" : 3.3.7 , installed 2.1.1 [Updatable] Adapter "tapo" : 0.0.8 , installed 0.0.8 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "text2command" : 2.3.0 , installed 2.3.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "tuya" : 3.13.1 , installed 3.13.1 Adapter "twinkly" : 1.0.11 , installed 1.0.11 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-hqwidgets": 1.3.0 , installed 1.3.0 Adapter "vis-icontwo" : 0.93.0 , installed 0.93.0 Adapter "vis-inventwo" : 3.3.1 , installed 3.3.1 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "weatherunderground": 3.4.2, installed 3.4.2 Adapter "web" : 4.3.0 , installed 5.4.3 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wled" : 0.6.7 , installed 0.6.7 Adapter "ws" : 1.3.0 , installed 2.3.5 Adapter "yahka" : 0.17.0 , installed 0.17.0 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 40147 States: 33893 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://packages.grafana.com/enterprise/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://archive.raspberrypi.org/debian buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Get:3 https://repos.influxdata.com/debian buster InRelease [7029 B] Hit:4 https://deb.nodesource.com/node_16.x buster InRelease Get:5 https://packages.grafana.com/enterprise/deb stable InRelease [5984 B] Err:3 https://repos.influxdata.com/debian buster InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E Err:5 https://packages.grafana.com/enterprise/deb stable InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 Fetched 7029 B in 2s (4458 B/s) Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Failed to fetch https://packages.grafana.com/enterprise/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 58 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8083 0.0.0.0:* LISTEN 999 18723 623/perl tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 17963 521/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 16832 401/cupsd tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 116 14871 493/influxd tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 20546 955/exim4 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 58766 4644/io.sonoff.0 tcp 0 0 192.168.0.20:1888 0.0.0.0:* LISTEN 1001 58289 4857/io.mqtt.0 tcp 0 0 0.0.0.0:7072 0.0.0.0:* LISTEN 999 19639 623/perl tcp 0 0 127.0.0.1:45125 0.0.0.0:* LISTEN 1001 63008 5276/io.yahka.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 50997 4517/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 50990 4517/iobroker.js-co tcp 0 0 127.0.0.1:5037 0.0.0.0:* LISTEN 1001 80696 5548/adb tcp6 0 0 :::8081 :::* LISTEN 1001 56689 4535/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 58356 4931/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 116 22170 493/influxd tcp6 0 0 :::22 :::* LISTEN 0 18478 521/sshd tcp6 0 0 :::8087 :::* LISTEN 1001 61368 5105/io.simple-api. tcp6 0 0 ::1:631 :::* LISTEN 0 16831 401/cupsd tcp6 0 0 ::1:25 :::* LISTEN 0 20547 955/exim4 tcp6 0 0 :::3306 :::* LISTEN 115 14989 615/mysqld tcp6 0 0 :::42991 :::* LISTEN 1001 62970 5276/io.yahka.0 udp 0 0 0.0.0.0:57285 0.0.0.0:* 1001 61295 4925/io.broadlink2. udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 59033 4775/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 59034 4775/io.tuya.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 60742 4657/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 21591 452/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 18628 502/cups-browsed udp 0 0 0.0.0.0:37498 0.0.0.0:* 1001 155534 4925/io.broadlink2. udp 0 0 0.0.0.0:40088 0.0.0.0:* 108 14791 395/avahi-daemon: r udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 58288 4925/io.broadlink2. udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 61522 4821/io.ham.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14789 395/avahi-daemon: r udp 0 0 0.0.0.0:43266 0.0.0.0:* 1001 58323 4925/io.broadlink2. udp6 0 0 :::546 :::* 0 21776 452/dhcpcd udp6 0 0 :::5353 :::* 108 14790 395/avahi-daemon: r udp6 0 0 :::57220 :::* 108 14792 395/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-04-11 12:42:10.154 - debug: simple-api.0 (5105) POST-setBulk for id=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.OZONE.State, oid=State, used=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.OZONE.State, value=off 2023-04-11 12:42:10.155 - debug: simple-api.0 (5105) POST-setBulk for id=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.SMART_WINTER_MODE_ACTIVE.State, oid=State, used=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.SMART_WINTER_MODE_ACTIVE.State, value=false 2023-04-11 12:42:10.156 - debug: simple-api.0 (5105) POST-setBulk for id=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.FILTER_STATUS_CLEAN.State, oid=State, used=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.FILTER_STATUS_CLEAN.State, value=true 2023-04-11 12:42:10.156 - debug: simple-api.0 (5105) POST-setBulk for id=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.FILTER_STATUS_PURGE.State, oid=State, used=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.FILTER_STATUS_PURGE.State, value=false 2023-04-11 12:42:11.447 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Temperatureinheit","val":"°C"} 2023-04-11 12:42:11.449 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.AktuelleTemperatur","val":34} 2023-04-11 12:42:11.449 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.ZielTemperatur","val":34} 2023-04-11 12:42:11.450 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.EchteZielTemperatur","val":34} 2023-04-11 12:42:11.450 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Heizer","val":"Idle"} 2023-04-11 12:42:11.451 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Wasserpflege","val":"Standard"} 2023-04-11 12:42:11.451 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.WasserpflegeModi","val":"['Abwesend', 'Standard', 'Energiesparen', 'Energiesparen Plus', 'Wochenende']"} 2023-04-11 12:42:11.451 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.WasserpflegeIndex","val":1} 2023-04-11 12:42:11.453 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Pumpen.Waterfall.Modus","val":"ON"} 2023-04-11 12:42:11.453 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Pumpen.Waterfall.Switch","val":1} 2023-04-11 12:42:11.454 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Pumpen.P2.Modus","val":"OFF"} 2023-04-11 12:42:11.454 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Pumpen.P2.Switch","val":0} 2023-04-11 12:42:11.454 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Pumpen.P1.Modus","val":"OFF"} 2023-04-11 12:42:11.468 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Pumpen.P1.Switch","val":0} 2023-04-11 12:42:11.470 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Lichter.LI.Is_On","val":false} 2023-04-11 12:42:11.471 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Lichter.LI.Switch","val":false} 2023-04-11 12:42:11.471 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Sensoren.CIRCULATING_PUMP.State","val":"on"} 2023-04-11 12:42:11.471 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Sensoren.OZONE.State","val":"off"} 2023-04-11 12:42:11.472 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Sensoren.SMART_WINTER_MODE_ACTIVE.State","val":false} 2023-04-11 12:42:11.474 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Sensoren.FILTER_STATUS_CLEAN.State","val":true} 2023-04-11 12:42:11.475 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Sensoren.FILTER_STATUS_PURGE.State","val":false} ============ Mark until here for C&P ============= iob diag has finished.Hier die Summary:
======================= SUMMARY ======================= v.2023-04-02 Operatingsystem: Raspbian GNU/Linux 10 (buster) Kernel: 5.10.103-v7l+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 58 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v16.19.0 /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 Recommended versions are nodejs 18.x.y and npm 9.x.y MEMORY: total used free shared buff/cache available Mem: 3.8G 2.9G 383M 5.0M 570M 1.1G Swap: 8.2G 401M 7.8G Total: 12G 3.3G 8.2G Active iob-Instances: 41 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi-iob - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 40147 States: 33893 Size of iob-Database: 64M /opt/iobroker/iobroker-data/objects.jsonl 27M /opt/iobroker/iobroker-data/objects.json.migrated 27M /opt/iobroker/iobroker-data/objects.json.bak.migrated 4.0K /opt/iobroker/iobroker-data/objects.json.old 0 /opt/iobroker/iobroker-data/objects.json.broken 49M /opt/iobroker/iobroker-data/states.jsonl 7.9M /opt/iobroker/iobroker-data/states.json.migrated 7.9M /opt/iobroker/iobroker-data/states.json.bak.migrated 6.3M /opt/iobroker/iobroker-data/states.json.old 0 /opt/iobroker/iobroker-data/states.json.broken -
hier nun der vollständige output vom tool:
Skript v.2023-04-02 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.2 Architecture : armv7l Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 10 (buster) Release: 10 Codename: buster PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 12:39:46 up 1:21, 2 users, load average: 1.39, 1.82, 1.93 CPU threads: 4 *** Time and Time Zones *** Local time: Tue 2023-04-11 12:39:47 CEST Universal time: Tue 2023-04-11 10:39:47 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.8G 490M 5.0M 581M 1.2G Swap: 8.2G 401M 7.8G Total: 12G 3.2G 8.3G 3837 M total memory 2761 M used memory 694 M active memory 2528 M inactive memory 494 M free memory 127 M buffer memory 453 M swap cache 8191 M total swap 401 M used swap 7790 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 220G 28G 184G 14% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 1.9G 8.6M 1.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/sda1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Apr 11 11:18:13 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:54:0B:45 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=74cbdb6a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Tue Apr 11 11:18:15 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Tue Apr 11 11:18:15 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Tue Apr 11 11:18:17 2023] EXT4-fs (sda2): re-mounted. Opts: (null) Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 6.6G /var/ 1.4G /var/cache/apt 1.4G /var/cache 1.3G /var/cache/apt/archives 826M /var/lib /opt/iobroker/backups: 1.8G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 2.0G /opt/iobroker/iobroker-data/ 1.2G /opt/iobroker/iobroker-data/files 716M /opt/iobroker/iobroker-data/files/vis-2-beta 680M /opt/iobroker/iobroker-data/files/vis-2-beta/static 678M /opt/iobroker/iobroker-data/files/vis-2-beta/static/js The five largest files in iobroker-data are: 64M /opt/iobroker/iobroker-data/objects.jsonl 50M /opt/iobroker/iobroker-data/states.jsonl 33M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map 27M /opt/iobroker/iobroker-data/objects.json.migrated 27M /opt/iobroker/iobroker-data/objects.json.bak.migrated *** NodeJS-Installation *** /usr/bin/nodejs v16.19.0 /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 nodejs: Installed: 16.19.0-deb-1nodesource1 Candidate: 16.19.1-deb-1nodesource1 Version table: 16.19.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x buster/main armhf Packages *** 16.19.0-deb-1nodesource1 100 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 5 Adapter State + system.adapter.accuweather.0 : accuweather : raspberrypi-iob - enabled + system.adapter.admin.0 : admin : raspberrypi-iob - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi-iob - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi-iob - enabled system.adapter.apple-find-me.0 : apple-find-me : raspberrypi-iob - disabled system.adapter.apple-find-me.1 : apple-find-me : raspberrypi-iob - disabled system.adapter.apple-find-me.2 : apple-find-me : raspberrypi-iob - disabled + system.adapter.backitup.0 : backitup : raspberrypi-iob - enabled system.adapter.bmw.0 : bmw : raspberrypi-iob - disabled system.adapter.bring.0 : bring : raspberrypi-iob - disabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi-iob - enabled + system.adapter.cloud.0 : cloud : raspberrypi-iob - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: raspberrypi-iob - disabled system.adapter.daswetter.0 : daswetter : raspberrypi-iob - disabled system.adapter.device-reminder.0 : device-reminder : raspberrypi-iob - disabled + system.adapter.device-watcher.0 : device-watcher : raspberrypi-iob - enabled system.adapter.devices.0 : devices : raspberrypi-iob - enabled system.adapter.discovery.0 : discovery : raspberrypi-iob - disabled system.adapter.dwd.0 : dwd : raspberrypi-iob - enabled + system.adapter.echarts.0 : echarts : raspberrypi-iob - enabled + system.adapter.email.0 : email : raspberrypi-iob - enabled + system.adapter.enigma2.1 : enigma2 : raspberrypi-iob - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi-iob - disabled system.adapter.feiertage.0 : feiertage : raspberrypi-iob - enabled + system.adapter.fhem.0 : fhem : raspberrypi-iob - enabled, port: 7072 + system.adapter.firetv.0 : firetv : raspberrypi-iob - enabled system.adapter.flot.0 : flot : raspberrypi-iob - enabled system.adapter.followthesun.0 : followthesun : raspberrypi-iob - disabled system.adapter.geofency.0 : geofency : raspberrypi-iob - disabled, port: 7999, bind: 0.0.0.0 + system.adapter.govee.0 : govee : raspberrypi-iob - enabled system.adapter.habpanel.0 : habpanel : raspberrypi-iob - enabled + system.adapter.ham.0 : ham : raspberrypi-iob - enabled + system.adapter.history.0 : history : raspberrypi-iob - enabled system.adapter.homekit-controller.0 : homekit-controller : raspberrypi-iob - disabled system.adapter.ical.0 : ical : raspberrypi-iob - enabled system.adapter.ico-cloud.0 : ico-cloud : raspberrypi-iob - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi-iob - enabled, port: 8086 + system.adapter.info.0 : info : raspberrypi-iob - enabled system.adapter.intex.0 : intex : raspberrypi-iob - disabled + system.adapter.iot.1 : iot : raspberrypi-iob - enabled + system.adapter.javascript.0 : javascript : raspberrypi-iob - enabled + system.adapter.linux-control.0 : linux-control : raspberrypi-iob - enabled system.adapter.meater.0 : meater : raspberrypi-iob - disabled system.adapter.meross.0 : meross : raspberrypi-iob - disabled system.adapter.milight-smart-light.0 : milight-smart-light : raspberrypi-iob - disabled system.adapter.milight-smart-light.2 : milight-smart-light : raspberrypi-iob - disabled system.adapter.milight-smart-light.3 : milight-smart-light : raspberrypi-iob - disabled system.adapter.milight-smart-light.4 : milight-smart-light : raspberrypi-iob - disabled + system.adapter.mqtt.0 : mqtt : raspberrypi-iob - enabled, port: 1888, bind: 192.168.0.20 system.adapter.netatmo-crawler.0 : netatmo-crawler : raspberrypi-iob - enabled + system.adapter.nina.0 : nina : raspberrypi-iob - enabled system.adapter.openweathermap.0 : openweathermap : raspberrypi-iob - disabled system.adapter.parcel.0 : parcel : raspberrypi-iob - disabled system.adapter.pegelalarm.0 : pegelalarm : raspberrypi-iob - enabled + system.adapter.ping.0 : ping : raspberrypi-iob - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi-iob - enabled + system.adapter.pushover.0 : pushover : raspberrypi-iob - enabled + system.adapter.reolink.0 : reolink : raspberrypi-iob - enabled + system.adapter.ring.0 : ring : raspberrypi-iob - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi-iob - enabled system.adapter.sayit.0 : sayit : raspberrypi-iob - disabled system.adapter.schoolfree.0 : schoolfree : raspberrypi-iob - enabled + system.adapter.shelly.0 : shelly : raspberrypi-iob - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi-iob - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.smartcontrol.0 : smartcontrol : raspberrypi-iob - disabled + system.adapter.sonoff.0 : sonoff : raspberrypi-iob - enabled, port: 1883, bind: 0.0.0.0 system.adapter.sonos.0 : sonos : raspberrypi-iob - disabled + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi-iob - enabled + system.adapter.spotify-premium.0 : spotify-premium : raspberrypi-iob - enabled system.adapter.sql.0 : sql : raspberrypi-iob - disabled, port: 3306 system.adapter.systeminfo.0 : systeminfo : raspberrypi-iob - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi-iob - enabled system.adapter.terminal.0 : terminal : raspberrypi-iob - disabled, port: 8089, bind: 192.168.0.20, run as: admin + system.adapter.text2command.0 : text2command : raspberrypi-iob - enabled system.adapter.tr-064.0 : tr-064 : raspberrypi-iob - disabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi-iob - enabled + system.adapter.tuya.0 : tuya : raspberrypi-iob - enabled system.adapter.twinkly.0 : twinkly : raspberrypi-iob - disabled system.adapter.vis-2-beta.0 : vis-2-beta : raspberrypi-iob - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi-iob - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi-iob - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi-iob - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi-iob - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi-iob - enabled system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi-iob - disabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi-iob - enabled system.adapter.vis-weather.0 : vis-weather : raspberrypi-iob - enabled system.adapter.vis.0 : vis : raspberrypi-iob - disabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi-iob - disabled + system.adapter.web.0 : web : raspberrypi-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.wled.0 : wled : raspberrypi-iob - disabled + system.adapter.yahka.0 : yahka : raspberrypi-iob - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi-iob - enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2219042-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi-iob - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.fhem.0 : fhem : raspberrypi-iob - enabled, port: 7072 + system.adapter.influxdb.0 : influxdb : raspberrypi-iob - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : raspberrypi-iob - enabled, port: 1888, bind: 192.168.0.20 + system.adapter.shelly.0 : shelly : raspberrypi-iob - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi-iob - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspberrypi-iob - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi-iob - enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2219042-if00 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.2.1 , installed 1.2.1 Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alarm" : 3.3.9 , installed 3.3.9 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "alias-manager": 1.2.4 , installed 1.2.4 Adapter "apple-find-me": 0.0.14 , installed 0.0.14 Adapter "backitup" : 2.6.16 , installed 2.6.16 Adapter "ble" : 0.13.0 , installed 0.13.0 Adapter "bmw" : 2.5.7 , installed 2.5.7 Adapter "bring" : 1.8.1 , installed 1.8.1 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.3.0 , installed 4.3.0 Adapter "coronavirus-statistics": 0.8.7, installed 0.8.7 Adapter "cul" : 2.0.2 , installed 2.0.2 Adapter "daswetter" : 3.1.7 , installed 3.1.7 Adapter "deconz" : 1.3.21 , installed 1.3.21 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "device-watcher": 2.6.1 , installed 2.6.1 Adapter "devices" : 1.1.2 , installed 1.1.2 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.3 , installed 2.8.3 Adapter "echarts" : 1.0.12 , installed 1.0.12 Adapter "email" : 1.1.4 , installed 1.1.4 Adapter "fb-checkpresence": 1.1.25, installed 1.1.25 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "fhem" : 1.6.3 , installed 1.6.3 Adapter "firetv" : 1.0.0 , installed 1.0.0 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "followthesun" : 0.4.1 , installed 0.4.1 Adapter "fritzbox" : 0.2.1 , installed 0.2.1 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "homekit-controller": 0.5.8, installed 0.5.8 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "ico-cloud" : 1.0.0 , installed 1.0.0 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "intex" : 0.0.7 , installed 0.0.7 Adapter "iot" : 1.14.2 , installed 1.14.2 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "linux-control": 1.1.3 , installed 1.1.3 Adapter "luftdaten" : 2.2.4 , installed 2.2.4 Adapter "mclighting" : 0.1.2 , installed 0.1.2 Adapter "meross" : 1.14.0 , installed 1.14.0 Adapter "milight" : 0.3.6 , installed 0.3.6 Adapter "milight-smart-light": 1.2.2, installed 1.2.2 Adapter "mqtt" : 4.0.7 , installed 4.0.7 Adapter "mysensors" : 3.0.0 , installed 3.0.0 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "openweathermap": 0.3.3 , installed 0.3.3 Adapter "parcel" : 0.0.25 , installed 0.0.25 Adapter "pegelalarm" : 1.3.0 , installed 1.3.0 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "radar2" : 2.0.3 , installed 2.0.3 Adapter "rest-api" : 1.0.4 , installed 1.0.4 Adapter "rflink" : 2.1.6 , installed 2.1.6 Adapter "ring" : 3.2.2 , installed 3.2.2 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "sayit" : 1.12.3 , installed 1.12.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "schoolfree" : 1.1.1 , installed 1.1.1 Adapter "shelly" : 6.3.1 , installed 6.3.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartcontrol" : 1.3.2 , installed 1.3.2 Adapter "socketio" : 4.2.0 , installed 6.3.3 Adapter "sonoff" : 2.5.1 , installed 2.5.1 Adapter "sonos" : 2.2.3 , installed 2.2.3 Adapter "spotify-premium": 1.2.1 , installed 1.2.1 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "systeminfo" : 0.3.1 , installed 0.3.1 Adapter "tankerkoenig" : 3.3.7 , installed 2.1.1 [Updatable] Adapter "tapo" : 0.0.8 , installed 0.0.8 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "text2command" : 2.3.0 , installed 2.3.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "tuya" : 3.13.1 , installed 3.13.1 Adapter "twinkly" : 1.0.11 , installed 1.0.11 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-hqwidgets": 1.3.0 , installed 1.3.0 Adapter "vis-icontwo" : 0.93.0 , installed 0.93.0 Adapter "vis-inventwo" : 3.3.1 , installed 3.3.1 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "weatherunderground": 3.4.2, installed 3.4.2 Adapter "web" : 4.3.0 , installed 5.4.3 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wled" : 0.6.7 , installed 0.6.7 Adapter "ws" : 1.3.0 , installed 2.3.5 Adapter "yahka" : 0.17.0 , installed 0.17.0 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 40147 States: 33893 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Failed to fetch https://packages.grafana.com/enterprise/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://archive.raspberrypi.org/debian buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Get:3 https://repos.influxdata.com/debian buster InRelease [7029 B] Hit:4 https://deb.nodesource.com/node_16.x buster InRelease Get:5 https://packages.grafana.com/enterprise/deb stable InRelease [5984 B] Err:3 https://repos.influxdata.com/debian buster InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E Err:5 https://packages.grafana.com/enterprise/deb stable InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 Fetched 7029 B in 2s (4458 B/s) Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Failed to fetch https://packages.grafana.com/enterprise/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9E439B102CF3C0C6 W: Failed to fetch https://repos.influxdata.com/debian/dists/buster/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 58 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8083 0.0.0.0:* LISTEN 999 18723 623/perl tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 17963 521/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 16832 401/cupsd tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 116 14871 493/influxd tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 20546 955/exim4 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 58766 4644/io.sonoff.0 tcp 0 0 192.168.0.20:1888 0.0.0.0:* LISTEN 1001 58289 4857/io.mqtt.0 tcp 0 0 0.0.0.0:7072 0.0.0.0:* LISTEN 999 19639 623/perl tcp 0 0 127.0.0.1:45125 0.0.0.0:* LISTEN 1001 63008 5276/io.yahka.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 50997 4517/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 50990 4517/iobroker.js-co tcp 0 0 127.0.0.1:5037 0.0.0.0:* LISTEN 1001 80696 5548/adb tcp6 0 0 :::8081 :::* LISTEN 1001 56689 4535/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 58356 4931/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 116 22170 493/influxd tcp6 0 0 :::22 :::* LISTEN 0 18478 521/sshd tcp6 0 0 :::8087 :::* LISTEN 1001 61368 5105/io.simple-api. tcp6 0 0 ::1:631 :::* LISTEN 0 16831 401/cupsd tcp6 0 0 ::1:25 :::* LISTEN 0 20547 955/exim4 tcp6 0 0 :::3306 :::* LISTEN 115 14989 615/mysqld tcp6 0 0 :::42991 :::* LISTEN 1001 62970 5276/io.yahka.0 udp 0 0 0.0.0.0:57285 0.0.0.0:* 1001 61295 4925/io.broadlink2. udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 59033 4775/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 59034 4775/io.tuya.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 60742 4657/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 21591 452/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 18628 502/cups-browsed udp 0 0 0.0.0.0:37498 0.0.0.0:* 1001 155534 4925/io.broadlink2. udp 0 0 0.0.0.0:40088 0.0.0.0:* 108 14791 395/avahi-daemon: r udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 58288 4925/io.broadlink2. udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 61522 4821/io.ham.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14789 395/avahi-daemon: r udp 0 0 0.0.0.0:43266 0.0.0.0:* 1001 58323 4925/io.broadlink2. udp6 0 0 :::546 :::* 0 21776 452/dhcpcd udp6 0 0 :::5353 :::* 108 14790 395/avahi-daemon: r udp6 0 0 :::57220 :::* 108 14792 395/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-04-11 12:42:10.154 - debug: simple-api.0 (5105) POST-setBulk for id=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.OZONE.State, oid=State, used=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.OZONE.State, value=off 2023-04-11 12:42:10.155 - debug: simple-api.0 (5105) POST-setBulk for id=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.SMART_WINTER_MODE_ACTIVE.State, oid=State, used=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.SMART_WINTER_MODE_ACTIVE.State, value=false 2023-04-11 12:42:10.156 - debug: simple-api.0 (5105) POST-setBulk for id=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.FILTER_STATUS_CLEAN.State, oid=State, used=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.FILTER_STATUS_CLEAN.State, value=true 2023-04-11 12:42:10.156 - debug: simple-api.0 (5105) POST-setBulk for id=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.FILTER_STATUS_PURGE.State, oid=State, used=javascript.0.Datenpunkte.SwimSpa.0.Sensoren.FILTER_STATUS_PURGE.State, value=false 2023-04-11 12:42:11.447 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Temperatureinheit","val":"°C"} 2023-04-11 12:42:11.449 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.AktuelleTemperatur","val":34} 2023-04-11 12:42:11.449 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.ZielTemperatur","val":34} 2023-04-11 12:42:11.450 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.EchteZielTemperatur","val":34} 2023-04-11 12:42:11.450 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Heizer","val":"Idle"} 2023-04-11 12:42:11.451 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Wasserpflege","val":"Standard"} 2023-04-11 12:42:11.451 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.WasserpflegeModi","val":"['Abwesend', 'Standard', 'Energiesparen', 'Energiesparen Plus', 'Wochenende']"} 2023-04-11 12:42:11.451 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.WasserpflegeIndex","val":1} 2023-04-11 12:42:11.453 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Pumpen.Waterfall.Modus","val":"ON"} 2023-04-11 12:42:11.453 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Pumpen.Waterfall.Switch","val":1} 2023-04-11 12:42:11.454 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Pumpen.P2.Modus","val":"OFF"} 2023-04-11 12:42:11.454 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Pumpen.P2.Switch","val":0} 2023-04-11 12:42:11.454 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Pumpen.P1.Modus","val":"OFF"} 2023-04-11 12:42:11.468 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Pumpen.P1.Switch","val":0} 2023-04-11 12:42:11.470 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Lichter.LI.Is_On","val":false} 2023-04-11 12:42:11.471 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Lichter.LI.Switch","val":false} 2023-04-11 12:42:11.471 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Sensoren.CIRCULATING_PUMP.State","val":"on"} 2023-04-11 12:42:11.471 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Sensoren.OZONE.State","val":"off"} 2023-04-11 12:42:11.472 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Sensoren.SMART_WINTER_MODE_ACTIVE.State","val":false} 2023-04-11 12:42:11.474 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Sensoren.FILTER_STATUS_CLEAN.State","val":true} 2023-04-11 12:42:11.475 - debug: simple-api.0 (5105) Add to Response: {"id":"javascript.0.Datenpunkte.SwimSpa.0.Sensoren.FILTER_STATUS_PURGE.State","val":false} ============ Mark until here for C&P ============= iob diag has finished.Hier die Summary:
======================= SUMMARY ======================= v.2023-04-02 Operatingsystem: Raspbian GNU/Linux 10 (buster) Kernel: 5.10.103-v7l+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 58 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v16.19.0 /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 Recommended versions are nodejs 18.x.y and npm 9.x.y MEMORY: total used free shared buff/cache available Mem: 3.8G 2.9G 383M 5.0M 570M 1.1G Swap: 8.2G 401M 7.8G Total: 12G 3.3G 8.2G Active iob-Instances: 41 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi-iob - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 40147 States: 33893 Size of iob-Database: 64M /opt/iobroker/iobroker-data/objects.jsonl 27M /opt/iobroker/iobroker-data/objects.json.migrated 27M /opt/iobroker/iobroker-data/objects.json.bak.migrated 4.0K /opt/iobroker/iobroker-data/objects.json.old 0 /opt/iobroker/iobroker-data/objects.json.broken 49M /opt/iobroker/iobroker-data/states.jsonl 7.9M /opt/iobroker/iobroker-data/states.json.migrated 7.9M /opt/iobroker/iobroker-data/states.json.bak.migrated 6.3M /opt/iobroker/iobroker-data/states.json.old 0 /opt/iobroker/iobroker-data/states.json.broken@tklein sagte in Backuperstellungproblem --> JavaScript heap out of memory:
Pending OS-Updates: 58
Updaten, zuvor das grafana und das influx-Repository anpacken, da muss jeweils der key ausgetauscht werden.
Ich würde da aber direkt die große Lösung vorziehen:
das Betriebssystem komplett neuaufsetzen, dann direkt als 64bit 'Bullseye'.
-
@tklein sagte in Backuperstellungproblem --> JavaScript heap out of memory:
Pending OS-Updates: 58
Updaten, zuvor das grafana und das influx-Repository anpacken, da muss jeweils der key ausgetauscht werden.
Ich würde da aber direkt die große Lösung vorziehen:
das Betriebssystem komplett neuaufsetzen, dann direkt als 64bit 'Bullseye'.
@thomas-braun danke für die infos/einschätzung
-
wie kann ich herausfinden, ob meine blocky skripte evtl. rekursionen/memory leaks hervorrufen? kann man sich auf blocklyebene die spechernutzung anzeigen lassen?
Nein geht nicht so kleinteilig. Das läuft alles in einem Prozess ab.
-
@tklein Altes System. Buster ist tod, Node in V18 empfohlen wenn ich nicht täusche.
Speicher ist auch am Limit und Swappt schon:
*** MEMORY *** total used free shared buff/cache available Mem: 3.8G 3.0G 262M 3.0M 565M 1.0G Swap: 8.2G 233M 8.0G Total: 12G 3.2G 8.2GMal den Javascript Adapter gestoppt und geschaut ob Backup dann geht?
Läuft nur iob auf dem Pi ?
Gibt hier noch was:
https://forum.iobroker.net/topic/42792/javascript-heap-out-of-memory-workaround
@wendy2702 js-adapter ist gestoppt. Leider keine Änderung:
pi@raspberrypi-iob:/opt/iobroker $ iobroker backup host.raspberrypi-iob 33895 states saved host.raspberrypi-iob 39802 objects saved <--- Last few GCs ---> [21492:0x46a0cd0] 159707 ms: Mark-sweep (reduce) 599.7 (616.1) -> 599.7 (604.8) MB, 250.5 / 0.0 ms (+ 0.0 ms in 0 steps since start of marking, biggest step 0.0 ms, walltime since start of marking 3616 ms) (average mu = 0.963, current mu = 0.932) last [21492:0x46a0cd0] 159870 ms: Mark-sweep (reduce) 599.7 (604.8) -> 599.7 (604.3) MB, 163.5 / 0.0 ms (average mu = 0.942, current mu = 0.000) last resort GC in old space requested <--- JS stacktrace ---> FATAL ERROR: CALL_AND_RETRY_LAST Allocation failed - JavaScript heap out of memory /usr/bin/iobroker: line 10: 21491 Aborted sudo -H -u iobroker node /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js "$@" pi@raspberrypi-iob:/opt/iobroker $ -
@wendy2702 js-adapter ist gestoppt. Leider keine Änderung:
pi@raspberrypi-iob:/opt/iobroker $ iobroker backup host.raspberrypi-iob 33895 states saved host.raspberrypi-iob 39802 objects saved <--- Last few GCs ---> [21492:0x46a0cd0] 159707 ms: Mark-sweep (reduce) 599.7 (616.1) -> 599.7 (604.8) MB, 250.5 / 0.0 ms (+ 0.0 ms in 0 steps since start of marking, biggest step 0.0 ms, walltime since start of marking 3616 ms) (average mu = 0.963, current mu = 0.932) last [21492:0x46a0cd0] 159870 ms: Mark-sweep (reduce) 599.7 (604.8) -> 599.7 (604.3) MB, 163.5 / 0.0 ms (average mu = 0.942, current mu = 0.000) last resort GC in old space requested <--- JS stacktrace ---> FATAL ERROR: CALL_AND_RETRY_LAST Allocation failed - JavaScript heap out of memory /usr/bin/iobroker: line 10: 21491 Aborted sudo -H -u iobroker node /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js "$@" pi@raspberrypi-iob:/opt/iobroker $@tklein Dann stoppe den iob komplett. Oder zumindest alle Adapter, die nicht zum Backup benötigt werden.
-
@tklein Dann stoppe den iob komplett. Oder zumindest alle Adapter, die nicht zum Backup benötigt werden.
-
@thomas-braun muss z.B. der zigbee-adapter laufen, wenn der im backup includiert ist?
Nein. Es muss eigentlich bis auf den Backitup und dem Admin und web nichts laufen.
-
Nein. Es muss eigentlich bis auf den Backitup und dem Admin und web nichts laufen.
@thomas-braun thx
-
Nein. Es muss eigentlich bis auf den Backitup und dem Admin und web nichts laufen.
@thomas-braun wieder das problem :-(
Diesmal via GUI getriggered
-
kann es sein, dass es evtl. mit einen Adapter zusammenhängt, der Probleme beim Packupen macht? Es knallt ja -"nur" beim iobroker, zigbee, db, javascript werden erstellt.
Bis zum 5.3.23 lief es noch:
-
@thomas-braun said in Backuperstellungproblem --> JavaScript heap out of memory:
iobroker list instances | grep + | wc -l
pi@raspberrypi-iob:/opt/iobroker $ iobroker list instances | grep + | wc -l
30 -
@thomas-braun said in Backuperstellungproblem --> JavaScript heap out of memory:
iobroker list instances | grep + | wc -l
pi@raspberrypi-iob:/opt/iobroker $ iobroker list instances | grep + | wc -l
30Du solltest doch alles bis auf wenige Kern-Instanzen auf Eis legen. Da laufen ja 30 Dinger noch mit.
Support us
272
Online32.7k
Benutzer82.4k
Themen1.3m
Beiträge