ESPHome: Reinstallation aber wie?

Wal

@dieter_p sagte in ESPHome: Reinstallation aber wie?:

probiere erst mal den ESP32 daraein zu bekommen.

Das verstehe ich nicht was du machen möchtest,
mit

esphome wizard ...

gibst du als Firmware esp32 an und dann erstellt er eine yaml für esp32 und wenn du schon eine yaml hast für dein Device gibst du die mit

esphome run ..yaml

an und die Firmware wird erstellt.

Wal

Du brauchst den Adapter gar nicht installieren wenn der Unterboden schon nicht funktioniert.
Der ESPHome -Adapter ist nur ein Frontend für ESPHome.

Dieter_P

@wal
Danke. Verstanden. Ich wollte vermeiden direkt weiter im Ziel/Livesystem zu arbeiten und mittels einer virtuellen Maschine und Restore mittels Backitup mir eine Kopie zu erzeugen wie ich es schon mal gemacht hab.

Egal, hab nun die 4 Befehle getestet und er hat esphome neu installiert und auch kompiliert:

pi@iobroker:~ $ pip install esphome
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting esphome
  Downloading https://www.piwheels.org/simple/esphome/esphome-2023.3.1-py2.py3-n                                                                             one-any.whl (2.6 MB)
     |████████████████████████████████| 2.6 MB 1.6 MB/s
Collecting esptool==4.5.1
  Downloading https://www.piwheels.org/simple/esptool/esptool-4.5.1-py3-none-any                                                                             .whl (320 kB)
     |████████████████████████████████| 320 kB 8.1 MB/s
Requirement already satisfied: pyserial==3.5 in ./.local/lib/python3.9/site-pack                                                                             ages (from esphome) (3.5)
Collecting zeroconf==0.47.3
  Downloading zeroconf-0.47.3.tar.gz (60 kB)
     |████████████████████████████████| 60 kB 2.0 MB/s
  Installing build dependencies ... done
  Getting requirements to build wheel ... done
    Preparing wheel metadata ... done
Collecting tzlocal==4.2
  Downloading https://www.piwheels.org/simple/tzlocal/tzlocal-4.2-py3-none-any.w                                                                             hl (19 kB)
Collecting paho-mqtt==1.6.1
  Downloading https://www.piwheels.org/simple/paho-mqtt/paho_mqtt-1.6.1-py3-none                                                                             -any.whl (75 kB)
     |████████████████████████████████| 75 kB 1.5 MB/s
Collecting kconfiglib==13.7.1
  Downloading https://www.piwheels.org/simple/kconfiglib/kconfiglib-13.7.1-py2.p                                                                             y3-none-any.whl (145 kB)
     |████████████████████████████████| 145 kB 1.6 MB/s
Collecting aioesphomeapi==13.5.0
  Downloading https://www.piwheels.org/simple/aioesphomeapi/aioesphomeapi-13.5.0                                                                             -py2.py3-none-any.whl (54 kB)
     |████████████████████████████████| 54 kB 804 kB/s
Requirement already satisfied: platformio==6.1.6 in ./.local/lib/python3.9/site-                                                                             packages (from esphome) (6.1.6)
Requirement already satisfied: colorama==0.4.6 in ./.local/lib/python3.9/site-pa                                                                             ckages (from esphome) (0.4.6)
Requirement already satisfied: click==8.1.3 in ./.local/lib/python3.9/site-packa                                                                             ges (from esphome) (8.1.3)
Collecting esphome-dashboard==20230214.0
  Downloading https://www.piwheels.org/simple/esphome-dashboard/esphome_dashboar                                                                             d-20230214.0-py3-none-any.whl (1.6 MB)
     |████████████████████████████████| 1.6 MB 2.5 MB/s
Collecting tornado==6.2
  Downloading tornado-6.2-cp37-abi3-manylinux_2_17_aarch64.manylinux2014_aarch64                                                                             .whl (424 kB)
     |████████████████████████████████| 424 kB 8.4 MB/s
Collecting voluptuous==0.13.1
  Downloading https://www.piwheels.org/simple/voluptuous/voluptuous-0.13.1-py3-n                                                                             one-any.whl (35 kB)
Collecting tzdata>=2021.1
  Downloading https://www.piwheels.org/simple/tzdata/tzdata-2023.2-py2.py3-none-                                                                             any.whl (342 kB)
     |████████████████████████████████| 342 kB 4.4 MB/s
Collecting PyYAML==6.0
  Downloading PyYAML-6.0-cp39-cp39-manylinux_2_17_aarch64.manylinux2014_aarch64.                                                                             whl (731 kB)
     |████████████████████████████████| 731 kB 9.3 MB/s
Collecting noiseprotocol<1.0,>=0.3.1
  Downloading https://www.piwheels.org/simple/noiseprotocol/noiseprotocol-0.3.1-                                                                             py3-none-any.whl (20 kB)
Collecting async-timeout>=4.0
  Downloading https://www.piwheels.org/simple/async-timeout/async_timeout-4.0.2-                                                                             py3-none-any.whl (5.8 kB)
Collecting protobuf>=3.19.0
  Downloading protobuf-4.22.1-cp37-abi3-manylinux2014_aarch64.whl (301 kB)
     |████████████████████████████████| 301 kB 8.4 MB/s
Collecting bitstring>=3.1.6
  Downloading https://www.piwheels.org/simple/bitstring/bitstring-4.0.1-py3-none                                                                             -any.whl (45 kB)
     |████████████████████████████████| 45 kB 696 kB/s
Collecting ecdsa>=0.16.0
  Downloading https://www.piwheels.org/simple/ecdsa/ecdsa-0.18.0-py2.py3-none-an                                                                             y.whl (142 kB)
     |████████████████████████████████| 142 kB 3.7 MB/s
Collecting cryptography>=2.1.4
  Downloading cryptography-40.0.1-cp36-abi3-manylinux_2_28_aarch64.whl (3.5 MB)
     |████████████████████████████████| 3.5 MB 8.0 MB/s
Collecting reedsolo<=1.6.0,>=1.5.3
  Downloading reedsolo-1.6.0.tar.gz (278 kB)
     |████████████████████████████████| 278 kB 10.0 MB/s
Requirement already satisfied: aiofiles==22.1.* in ./.local/lib/python3.9/site-p                                                                             ackages (from platformio==6.1.6->esphome) (22.1.0)
Requirement already satisfied: starlette==0.23.* in ./.local/lib/python3.9/site-                                                                             packages (from platformio==6.1.6->esphome) (0.23.1)
Requirement already satisfied: semantic-version==2.10.* in ./.local/lib/python3.                                                                             9/site-packages (from platformio==6.1.6->esphome) (2.10.0)
Requirement already satisfied: bottle==0.12.* in ./.local/lib/python3.9/site-pac                                                                             kages (from platformio==6.1.6->esphome) (0.12.25)
Requirement already satisfied: pyelftools<1,>=0.27 in ./.local/lib/python3.9/sit                                                                             e-packages (from platformio==6.1.6->esphome) (0.29)
Requirement already satisfied: tabulate==0.9.* in ./.local/lib/python3.9/site-pa                                                                             ckages (from platformio==6.1.6->esphome) (0.9.0)
Requirement already satisfied: ajsonrpc==1.* in ./.local/lib/python3.9/site-pack                                                                             ages (from platformio==6.1.6->esphome) (1.2.0)
Requirement already satisfied: uvicorn==0.20.* in ./.local/lib/python3.9/site-pa                                                                             ckages (from platformio==6.1.6->esphome) (0.20.0)
Requirement already satisfied: marshmallow==3.* in ./.local/lib/python3.9/site-p                                                                             ackages (from platformio==6.1.6->esphome) (3.19.0)
Requirement already satisfied: wsproto==1.2.* in ./.local/lib/python3.9/site-pac                                                                             kages (from platformio==6.1.6->esphome) (1.2.0)
Requirement already satisfied: requests==2.* in /usr/lib/python3/dist-packages (                                                                             from platformio==6.1.6->esphome) (2.25.1)
Requirement already satisfied: packaging>=17.0 in ./.local/lib/python3.9/site-pa                                                                             ckages (from marshmallow==3.*->platformio==6.1.6->esphome) (23.0)
Requirement already satisfied: typing-extensions>=3.10.0 in ./.local/lib/python3                                                                             .9/site-packages (from starlette==0.23.*->platformio==6.1.6->esphome) (4.5.0)
Requirement already satisfied: anyio<5,>=3.4.0 in ./.local/lib/python3.9/site-pa                                                                             ckages (from starlette==0.23.*->platformio==6.1.6->esphome) (3.6.2)
Collecting pytz-deprecation-shim
  Downloading https://www.piwheels.org/simple/pytz-deprecation-shim/pytz_depreca                                                                             tion_shim-0.1.0.post0-py2.py3-none-any.whl (15 kB)
Requirement already satisfied: h11>=0.8 in ./.local/lib/python3.9/site-packages                                                                              (from uvicorn==0.20.*->platformio==6.1.6->esphome) (0.14.0)
Collecting ifaddr>=0.1.7
  Downloading https://www.piwheels.org/simple/ifaddr/ifaddr-0.2.0-py3-none-any.w                                                                             hl (12 kB)
Requirement already satisfied: sniffio>=1.1 in ./.local/lib/python3.9/site-packa                                                                             ges (from anyio<5,>=3.4.0->starlette==0.23.*->platformio==6.1.6->esphome) (1.3.0                                                                             )
Requirement already satisfied: idna>=2.8 in /usr/lib/python3/dist-packages (from                                                                              anyio<5,>=3.4.0->starlette==0.23.*->platformio==6.1.6->esphome) (2.10)
Collecting cffi>=1.12
  Downloading cffi-1.15.1-cp39-cp39-manylinux_2_17_aarch64.manylinux2014_aarch64                                                                             .whl (448 kB)
     |████████████████████████████████| 448 kB 8.2 MB/s
Collecting pycparser
  Downloading https://www.piwheels.org/simple/pycparser/pycparser-2.21-py2.py3-n                                                                             one-any.whl (119 kB)
     |████████████████████████████████| 119 kB 1.6 MB/s
Requirement already satisfied: six>=1.9.0 in /usr/lib/python3/dist-packages (fro                                                                             m ecdsa>=0.16.0->esptool==4.5.1->esphome) (1.16.0)
Building wheels for collected packages: zeroconf, reedsolo
  Building wheel for zeroconf (PEP 517) ... done
  Created wheel for zeroconf: filename=zeroconf-0.47.3-cp39-cp39-manylinux_2_31_                                                                             aarch64.whl size=2149144 sha256=b39b227d016cb3ccbe429d8e062abb7c814977dd90fbd5b1                                                                             2656e217f9ab02e0
  Stored in directory: /home/pi/.cache/pip/wheels/87/78/46/5c2c165377f8d0cac0a33                                                                             adf73ad3c5eef8efc388574ea9f2e
  Building wheel for reedsolo (setup.py) ... done
  Created wheel for reedsolo: filename=reedsolo-1.6.0-py3-none-any.whl size=3103                                                                             6 sha256=cd04bc51e4a3f7b6b66a4e16aac0a768bb0725feb694fb24610ba1d2650ff33c
  Stored in directory: /home/pi/.cache/pip/wheels/0a/69/f4/ff4c4b80781195a115015                                                                             f14b39ba1e708ef6a77a0fd5187fb
Successfully built zeroconf reedsolo
Installing collected packages: pycparser, cffi, tzdata, ifaddr, cryptography, as                                                                             ync-timeout, zeroconf, reedsolo, pytz-deprecation-shim, protobuf, noiseprotocol,                                                                              ecdsa, bitstring, voluptuous, tzlocal, tornado, PyYAML, paho-mqtt, kconfiglib,                                                                              esptool, esphome-dashboard, aioesphomeapi, esphome
Successfully installed PyYAML-6.0 aioesphomeapi-13.5.0 async-timeout-4.0.2 bitst                                                                             ring-4.0.1 cffi-1.15.1 cryptography-40.0.1 ecdsa-0.18.0 esphome-2023.3.1 esphome                                                                             -dashboard-20230214.0 esptool-4.5.1 ifaddr-0.2.0 kconfiglib-13.7.1 noiseprotocol                                                                             -0.3.1 paho-mqtt-1.6.1 protobuf-4.22.1 pycparser-2.21 pytz-deprecation-shim-0.1.                                                                             0.post0 reedsolo-1.6.0 tornado-6.2 tzdata-2023.2 tzlocal-4.2 voluptuous-0.13.1 z                                                                             eroconf-0.47.3
pi@iobroker:~ $ export PATH=$PATH:$HOME/.local/bin
pi@iobroker:~ $ esphome version
Version: 2023.3.1
pi@iobroker:~ $ esphome wizard livingroom.yaml
Hi there!
I'm the wizard of ESPHome :)
And I'm here to help you get started with ESPHome.
In 4 steps I'm going to guide you through creating a basic configuration file fo                                                                             r your custom ESP8266/ESP32 firmware. Yay!



============= STEP 1 =============
    _____ ____  _____  ______
   / ____/ __ \|  __ \|  ____|
  | |   | |  | | |__) | |__
  | |   | |  | |  _  /|  __|
  | |___| |__| | | \ \| |____
   \_____\____/|_|  \_\______|

===================================
First up, please choose a name for your node.
It should be a unique name that can be used to identify the device later.
For example, I like calling the node in my living room livingroom.

(name): livingroom
Great! Your node is now called "livingroom".


============= STEP 2 =============
      ______  _____ _____
     |  ____|/ ____|  __ \\
     | |__  | (___ | |__) |
     |  __|  \___ \|  ___/
     | |____ ____) | |
     |______|_____/|_|

===================================
Now I'd like to know what microcontroller you're using so that I can compile fir                                                                             mwares for it.
Are you using an ESP32 or ESP8266 platform? (Choose ESP8266 for Sonoff devices)

Please enter either ESP32 or ESP8266.
(ESP32/ESP8266): ESP32
Thanks! You've chosen ESP32 as your platform.

Next, I need to know what board you're using.
Please go to http://docs.platformio.org/en/latest/platforms/espressif32.html#boa                                                                             rds and choose a board.
(Type esp01_1m for Sonoff devices)

For example "nodemcu-32s".
Options: adafruit_qtpy_esp32, adafruit_qtpy_esp32c3, adafruit_qtpy_esp32s2, alks                                                                             esp32, az-delivery-devkit-v4, bpi-bit, briki_abc_esp32, briki_mbc-wb_esp32, d-du                                                                             ino-32, esp-wrover-kit, esp32-devkitlipo, esp32-evb, esp32-gateway, esp32-poe, e                                                                             sp32-poe-iso, esp32-pro, esp320, esp32cam, esp32dev, esp32doit-devkit-v1, esp32d                                                                             oit-espduino, esp32thing, esp32thing_plus, esp32vn-iot-uno, espea32, espectro32,                                                                              espino32, etboard, featheresp32, featheresp32-s2, firebeetle32, fm-devkit, frog                                                                             board, healtypi4, heltec_wifi_kit_32, heltec_wifi_kit_32_v2, heltec_wifi_lora_32                                                                             , heltec_wifi_lora_32_V2, heltec_wireless_stick, heltec_wireless_stick_lite, hon                                                                             eylemon, hornbill32dev, hornbill32minima, imbrios-logsens-v1p1, inex_openkb, int                                                                             orobot, iotaap_magnolia, iotbusio, iotbusproteus, kits-edu, labplus_mpython, lol                                                                             in32, lolin32_lite, lolin_c3_mini, lolin_d32, lolin_d32_pro, lolin_s2_mini, lopy                                                                             , lopy4, m5stack-atom, m5stack-core-esp32, m5stack-core2, m5stack-coreink, m5sta                                                                             ck-fire, m5stack-grey, m5stack-timer-cam, m5stick-c, magicbit, mgbot-iotik32a, m                                                                             gbot-iotik32b, mhetesp32devkit, mhetesp32minikit, microduino-core-esp32, nano32,                                                                              nina_w10, node32s, nodemcu-32s, nscreen-32, odroid_esp32, onehorse32dev, oroca_                                                                             edubot, pico32, piranha_esp32, pocket_32, pycom_gpy, qchip, quantum, s_odi_ultra                                                                             , sensesiot_weizen, sg-o_airMon, sparkfun_lora_gateway_1-channel, tinypico, ttgo                                                                             -lora32-v1, ttgo-lora32-v2, ttgo-lora32-v21, ttgo-t-beam, ttgo-t-watch, ttgo-t1,                                                                              ttgo-t7-v13-mini32, ttgo-t7-v14-mini32, turta_iot_node, upesy_wroom, upesy_wrov                                                                             er, vintlabs-devkit-v1, wemos_d1_mini32, wemosbat, wesp32, widora-air, wifiduino                                                                             32, xinabox_cw02
(board): m5stack-atom
Way to go! You've chosen m5stack-atom as your board.



============= STEP 3 =============
   __          ___ ______ _
   \ \        / (_)  ____(_)
    \ \  /\  / / _| |__   _
     \ \/  \/ / | |  __| | |
      \  /\  /  | | |    | |
       \/  \/   |_|_|    |_|

===================================
In this step, I'm going to create the configuration for WiFi.

First, what's the SSID (the name) of the WiFi network livingroom should connect to?
For example "Abraham Linksys".
(ssid): WifiSSID
Thank you very much! You've just chosen "Finger Weg" as your SSID.

Now please state the password of the WiFi network so that I can connect to it (Leave empty for no password)

For example "PASSWORD42"
(PSK): Password42
Perfect! WiFi is now set up (you can create static IPs and so on later).


============= STEP 4 =============
       ____ _______
      / __ \__   __|/\\
     | |  | | | |  /  \\
     | |  | | | | / /\ \\
     | |__| | | |/ ____ \\
      \____/  |_/_/    \_\\

===================================
Almost there! ESPHome can automatically upload custom firmwares over WiFi (over the air) and integrates into Home Assistant with a native API.
This can be insecure if you do not trust the WiFi network. Do you want to set a password for connecting to this ESP?

Press ENTER for no password
(password):

DONE! I've now written a new configuration file to livingroom.yaml

Next steps:
  > Follow the rest of the getting started guide:
  > https://esphome.io/guides/getting_started_command_line.html#adding-some-features
  > to learn how to customize ESPHome and install it to your device.
pi@iobroker:~ $ esphome run livingroom.yaml
INFO Reading configuration livingroom.yaml...
INFO Generating C++ source...
INFO Core config or version changed, cleaning build files...
INFO Compiling app...
*************************************************************************************************************************************************************
If you like PlatformIO, please:
- follow us on Twitter to stay up-to-date on the latest project news > https://twitter.com/PlatformIO_Org
- star it on GitHub > https://github.com/platformio/platformio
- try PlatformIO IDE for embedded development > https://platformio.org/platformio-ide
*************************************************************************************************************************************************************

Processing livingroom (board: m5stack-atom; framework: arduino; platform: platformio/espressif32 @ 5.2.0)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Platform Manager: Installing platformio/espressif32 @ 5.2.0
INFO Installing platformio/espressif32 @ 5.2.0
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Platform Manager: espressif32@5.2.0 has been installed!
INFO espressif32@5.2.0 has been installed!
Tool Manager: Installing espressif/toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch3
INFO Installing espressif/toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch3
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Tool Manager: toolchain-xtensa-esp32@8.4.0+2021r2-patch3 has been installed!
INFO toolchain-xtensa-esp32@8.4.0+2021r2-patch3 has been installed!
Tool Manager: Installing platformio/framework-arduinoespressif32 @ ~3.20005.0
INFO Installing platformio/framework-arduinoespressif32 @ ~3.20005.0
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Tool Manager: framework-arduinoespressif32@3.20005.220925 has been installed!
INFO framework-arduinoespressif32@3.20005.220925 has been installed!
Tool Manager: Installing platformio/tool-esptoolpy @ ~1.40201.0
INFO Installing platformio/tool-esptoolpy @ ~1.40201.0
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Tool Manager: tool-esptoolpy@1.40201.0 has been installed!
INFO tool-esptoolpy@1.40201.0 has been installed!
Library Manager: Installing esphome/AsyncTCP-esphome @ 1.2.2
INFO Installing esphome/AsyncTCP-esphome @ 1.2.2
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Library Manager: AsyncTCP-esphome@1.2.2 has been installed!
INFO AsyncTCP-esphome@1.2.2 has been installed!
Library Manager: Installing esphome/ESPAsyncWebServer-esphome @ 2.1.0
INFO Installing esphome/ESPAsyncWebServer-esphome @ 2.1.0
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Library Manager: ESPAsyncWebServer-esphome@2.1.0 has been installed!
INFO ESPAsyncWebServer-esphome@2.1.0 has been installed!
Library Manager: Resolving dependencies...
INFO Resolving dependencies...
Tool Manager: Installing platformio/tool-scons @ ~4.40400.0
INFO Installing platformio/tool-scons @ ~4.40400.0
Downloading  [####################################]  100%
Unpacking  [####################################]  100%
Tool Manager: tool-scons@4.40400.0 has been installed!
INFO tool-scons@4.40400.0 has been installed!
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
 - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch3
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
Dependency Graph
|-- AsyncTCP-esphome @ 1.2.2
|-- WiFi @ 2.0.0
|-- FS @ 2.0.0
|-- Update @ 2.0.0
|-- ESPAsyncWebServer-esphome @ 2.1.0
|   |-- AsyncTCP-esphome @ 1.2.2
|-- DNSServer @ 2.0.0
|-- ESPmDNS @ 2.0.0
Compiling .pioenvs/livingroom/src/esphome/components/api/api_connection.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/api/api_frame_helper.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/api/api_pb2.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/api/api_pb2_service.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/api/api_server.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/api/list_entities.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/api/proto.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/api/subscribe_state.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/api/user_services.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/captive_portal/captive_portal.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/esp32/core.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/esp32/gpio.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/esp32/preferences.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/logger/logger.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/md5/md5.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/mdns/mdns_component.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/mdns/mdns_esp32.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/mdns/mdns_esp8266.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/mdns/mdns_rp2040.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/network/util.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/ota/ota_backend_arduino_esp32.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/ota/ota_backend_arduino_esp8266.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/ota/ota_backend_arduino_rp2040.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/ota/ota_backend_esp_idf.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/ota/ota_component.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/socket/bsd_sockets_impl.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/socket/lwip_raw_tcp_impl.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/socket/socket.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/web_server_base/web_server_base.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/wifi/wifi_component.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/wifi/wifi_component_esp32_arduino.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/wifi/wifi_component_esp8266.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/wifi/wifi_component_esp_idf.cpp.o
Compiling .pioenvs/livingroom/src/esphome/components/wifi/wifi_component_pico_w.cpp.o
Compiling .pioenvs/livingroom/src/esphome/core/application.cpp.o
Compiling .pioenvs/livingroom/src/esphome/core/color.cpp.o
Compiling .pioenvs/livingroom/src/esphome/core/component.cpp.o
Compiling .pioenvs/livingroom/src/esphome/core/component_iterator.cpp.o
Compiling .pioenvs/livingroom/src/esphome/core/controller.cpp.o
Compiling .pioenvs/livingroom/src/esphome/core/entity_base.cpp.o
Compiling .pioenvs/livingroom/src/esphome/core/helpers.cpp.o
Compiling .pioenvs/livingroom/src/esphome/core/log.cpp.o
Compiling .pioenvs/livingroom/src/esphome/core/scheduler.cpp.o
Compiling .pioenvs/livingroom/src/esphome/core/util.cpp.o
Compiling .pioenvs/livingroom/src/main.cpp.o
Building .pioenvs/livingroom/bootloader.bin
Creating esp32 image...
Successfully created esp32 image.
Generating partitions .pioenvs/livingroom/partitions.bin
Compiling .pioenvs/livingroom/lib583/AsyncTCP-esphome/AsyncTCP.cpp.o
Compiling .pioenvs/livingroom/libd94/WiFi/WiFi.cpp.o
Compiling .pioenvs/livingroom/libd94/WiFi/WiFiAP.cpp.o
Compiling .pioenvs/livingroom/libd94/WiFi/WiFiClient.cpp.o
Compiling .pioenvs/livingroom/libd94/WiFi/WiFiGeneric.cpp.o
Archiving .pioenvs/livingroom/lib583/libAsyncTCP-esphome.a
Indexing .pioenvs/livingroom/lib583/libAsyncTCP-esphome.a
Compiling .pioenvs/livingroom/libd94/WiFi/WiFiMulti.cpp.o
Compiling .pioenvs/livingroom/libd94/WiFi/WiFiSTA.cpp.o
Compiling .pioenvs/livingroom/libd94/WiFi/WiFiScan.cpp.o
Compiling .pioenvs/livingroom/libd94/WiFi/WiFiServer.cpp.o
Compiling .pioenvs/livingroom/libd94/WiFi/WiFiUdp.cpp.o
Compiling .pioenvs/livingroom/lib1e0/FS/FS.cpp.o
Compiling .pioenvs/livingroom/lib1e0/FS/vfs_api.cpp.o
Compiling .pioenvs/livingroom/lib155/Update/HttpsOTAUpdate.cpp.o
Archiving .pioenvs/livingroom/libd94/libWiFi.a
Indexing .pioenvs/livingroom/libd94/libWiFi.a
Compiling .pioenvs/livingroom/lib155/Update/Updater.cpp.o
Compiling .pioenvs/livingroom/lib5f0/ESPAsyncWebServer-esphome/AsyncEventSource.cpp.o
Compiling .pioenvs/livingroom/lib5f0/ESPAsyncWebServer-esphome/AsyncWebSocket.cpp.o
Archiving .pioenvs/livingroom/lib1e0/libFS.a
Indexing .pioenvs/livingroom/lib1e0/libFS.a
Compiling .pioenvs/livingroom/lib5f0/ESPAsyncWebServer-esphome/WebAuthentication.cpp.o
Archiving .pioenvs/livingroom/lib155/libUpdate.a
Indexing .pioenvs/livingroom/lib155/libUpdate.a
Compiling .pioenvs/livingroom/lib5f0/ESPAsyncWebServer-esphome/WebHandlers.cpp.o
Compiling .pioenvs/livingroom/lib5f0/ESPAsyncWebServer-esphome/WebRequest.cpp.o
Compiling .pioenvs/livingroom/lib5f0/ESPAsyncWebServer-esphome/WebResponses.cpp.o
Compiling .pioenvs/livingroom/lib5f0/ESPAsyncWebServer-esphome/WebServer.cpp.o
Compiling .pioenvs/livingroom/lib83c/DNSServer/DNSServer.cpp.o
Compiling .pioenvs/livingroom/liba62/ESPmDNS/ESPmDNS.cpp.o
Archiving .pioenvs/livingroom/lib5f0/libESPAsyncWebServer-esphome.a
Archiving .pioenvs/livingroom/lib83c/libDNSServer.a
Indexing .pioenvs/livingroom/lib5f0/libESPAsyncWebServer-esphome.a
Indexing .pioenvs/livingroom/lib83c/libDNSServer.a
Compiling .pioenvs/livingroom/FrameworkArduino/Esp.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/FirmwareMSC.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/FunctionalInterrupt.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/HWCDC.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/HardwareSerial.cpp.o
Archiving .pioenvs/livingroom/liba62/libESPmDNS.a
Indexing .pioenvs/livingroom/liba62/libESPmDNS.a
Compiling .pioenvs/livingroom/FrameworkArduino/IPAddress.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/IPv6Address.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/MD5Builder.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/Print.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/Stream.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/StreamString.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/Tone.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/USB.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/USBCDC.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/USBMSC.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/WMath.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/WString.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/base64.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/cbuf.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-adc.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-bt.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-cpu.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-dac.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-gpio.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-i2c-slave.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-i2c.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-ledc.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-matrix.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-misc.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-psram.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-rgb-led.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-rmt.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-sigmadelta.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-spi.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-time.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-timer.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-tinyusb.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-touch.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/esp32-hal-uart.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/firmware_msc_fat.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/libb64/cdecode.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/libb64/cencode.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/main.cpp.o
Compiling .pioenvs/livingroom/FrameworkArduino/stdlib_noniso.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/wiring_pulse.c.o
Compiling .pioenvs/livingroom/FrameworkArduino/wiring_shift.c.o
Archiving .pioenvs/livingroom/libFrameworkArduino.a
Indexing .pioenvs/livingroom/libFrameworkArduino.a
Linking .pioenvs/livingroom/firmware.elf
RAM:   [=         ]  12.4% (used 40512 bytes from 327680 bytes)
Flash: [=====     ]  45.2% (used 829753 bytes from 1835008 bytes)
Building .pioenvs/livingroom/firmware.bin
Creating esp32 image...
Successfully created esp32 image.
esp32_create_combined_bin([".pioenvs/livingroom/firmware.bin"], [".pioenvs/livingroom/firmware.elf"])
Wrote 0xdbfc0 bytes to file /home/pi/.esphome/build/livingroom/.pioenvs/livingroom/firmware-factory.bin, ready to flash to offset 0x0
=============================================================== [SUCCESS] Took 469.96 seconds ===============================================================
INFO Successfully compiled program.
Found multiple options, please choose one:
  [1] /dev/ttyUSB0 (USB Serial)
  [2] Over The Air (livingroom.local)
(number): 2
INFO Resolving IP address of livingroom.local
ERROR Error resolving IP address of livingroom.local. Is it connected to WiFi?
ERROR (If this error persists, please set a static IP address: https://esphome.io/components/wifi.html#manual-ips)
ERROR Error resolving IP address: Error resolving address with mDNS: Did not respond. Maybe the device is offline., [Errno -2] Name or service not known
pi@iobroker:~ $

Der Unterbau scheint zu funktionieren. Wechsel ich wieder in den Adapter schlägt eine Kompilierung weiter fehl:

INFO Reading configuration /opt/iobroker/iobroker-data/esphome.0/esphome-web-9fb8e8.yaml...
INFO Generating C++ source...
INFO Compiling app...
Processing esp32-flur (board: m5stack-core-esp32; framework: arduino; platform: platformio/espressif32 @ 5.2.0)
--------------------------------------------------------------------------------
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
 - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch3
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
Dependency Graph
|-- AsyncTCP-esphome @ 1.2.2
|-- WiFi @ 2.0.0
|-- FS @ 2.0.0
|-- Update @ 2.0.0
|-- ESPAsyncWebServer-esphome @ 2.1.0
|   |-- AsyncTCP-esphome @ 1.2.2
|-- DNSServer @ 2.0.0
|-- ESPmDNS @ 2.0.0
|-- ArduinoJson @ 6.18.5
|-- FastLED @ 3.3.2
Compiling .pioenvs/esp32-flur/libe2e/FastLED/FastLED.cpp.o
Compiling .pioenvs/esp32-flur/libe2e/FastLED/bitswap.cpp.o
Compiling .pioenvs/esp32-flur/libe2e/FastLED/colorpalettes.cpp.o
In file included from .piolibdeps/esp32-flur/FastLED/led_sysdefs.h:48,
                 from .piolibdeps/esp32-flur/FastLED/FastLED.h:41,
                 from .piolibdeps/esp32-flur/FastLED/FastLED.cpp:2:
/home/iobroker/.platformio/packages/framework-arduinoespressif32/cores/esp32/Arduino.h:32:10: fatal error: esp_arduino_version.h: No such file or directory

*****************************************************************************
* Looking for esp_arduino_version.h dependency? Check our library registry!
*
* CLI  > platformio lib search "header:esp_arduino_version.h"
* Web  > https://registry.platformio.org/search?q=header:esp_arduino_version.h
*
*****************************************************************************

 #include "esp_arduino_version.h"
          ^~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
*** [.pioenvs/esp32-flur/libe2e/FastLED/FastLED.cpp.o] Error 1
Compiling .pioenvs/esp32-flur/libe2e/FastLED/colorutils.cpp.o
In file included from .piolibdeps/esp32-flur/FastLED/led_sysdefs.h:48,
                 from .piolibdeps/esp32-flur/FastLED/FastLED.h:41,
                 from .piolibdeps/esp32-flur/FastLED/bitswap.cpp:2:
/home/iobroker/.platformio/packages/framework-arduinoespressif32/cores/esp32/Arduino.h:32:10: fatal error: esp_arduino_version.h: No such file or directory

*****************************************************************************
* Looking for esp_arduino_version.h dependency? Check our library registry!
*
* CLI  > platformio lib search "header:esp_arduino_version.h"
* Web  > https://registry.platformio.org/search?q=header:esp_arduino_version.h
*
*****************************************************************************

 #include "esp_arduino_version.h"
          ^~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
*** [.pioenvs/esp32-flur/libe2e/FastLED/bitswap.cpp.o] Error 1
In file included from .piolibdeps/esp32-flur/FastLED/led_sysdefs.h:48,
                 from .piolibdeps/esp32-flur/FastLED/FastLED.h:41,
                 from .piolibdeps/esp32-flur/FastLED/colorpalettes.cpp:4:
/home/iobroker/.platformio/packages/framework-arduinoespressif32/cores/esp32/Arduino.h:32:10: fatal error: esp_arduino_version.h: No such file or directory

*****************************************************************************
* Looking for esp_arduino_version.h dependency? Check our library registry!
*
* CLI  > platformio lib search "header:esp_arduino_version.h"
* Web  > https://registry.platformio.org/search?q=header:esp_arduino_version.h
*
*****************************************************************************

 #include "esp_arduino_version.h"
          ^~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
*** [.pioenvs/esp32-flur/libe2e/FastLED/colorpalettes.cpp.o] Error 1
In file included from .piolibdeps/esp32-flur/FastLED/led_sysdefs.h:48,
                 from .piolibdeps/esp32-flur/FastLED/FastLED.h:41,
                 from .piolibdeps/esp32-flur/FastLED/colorutils.cpp:7:
/home/iobroker/.platformio/packages/framework-arduinoespressif32/cores/esp32/Arduino.h:32:10: fatal error: esp_arduino_version.h: No such file or directory

*****************************************************************************
* Looking for esp_arduino_version.h dependency? Check our library registry!
*
* CLI  > platformio lib search "header:esp_arduino_version.h"
* Web  > https://registry.platformio.org/search?q=header:esp_arduino_version.h
*
*****************************************************************************

 #include "esp_arduino_version.h"
          ^~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
*** [.pioenvs/esp32-flur/libe2e/FastLED/colorutils.cpp.o] Error 1
========================== [FAILED] Took 4.81 seconds ==========================

Wal

@dieter_p ,
da sind wir also weiter, es liegt am Adapter.

Edit: Stop!!! Du musst den Export Path noch dauerhaft machen.

echo 'export PATH=$PATH:$HOME/.local/bin' >> $HOME/.bashrc

und danach neu starten.

Thomas Braun

@dieter_p

Hast du auch das virtu environment für esphome angelegt?

python3 -m venv venv
source venv/bin/activate

Some people install ESPHome without the virtual environment, which can lead to issues with PATHs etc. Non virtual environment installations are considered not “supported” as people end up having to know your exact system setup.

Wal

@thomas-braun ,
upps hatte ich auch glatt übersehen, das war bei mir durch den Tasmocompiler schon vorhanden.

Dieter_P

@wal @Thomas-Braun

Das erzeugt bei mir einen Fehler bzw. ist nicht installiert:

pi@iobroker:~ $ python3 -m venv venv
The virtual environment was not created successfully because ensurepip is not
available.  On Debian/Ubuntu systems, you need to install the python3-venv
package using the following command.

    apt-get install python3-venv

You may need to use sudo with that command.  After installing the python3-venv
package, recreate your virtual environment.

Failing command: ['/home/pi/venv/bin/python3', '-Im', 'ensurepip', '--upgrade', '--default-pip']

pi@iobroker:~ $

Dieter_P

nun scheint es nach installation ok:


pi@iobroker:~ $ python3 -m venv venv
source venv/bin/activate
(venv) pi@iobroker:~ $

Thomas Braun

@dieter_p sagte in ESPHome: Reinstallation aber wie?:

Das erzeugt bei mir einen Fehler bzw. ist nicht installiert:

Dann installier es.

Ich würde wohl auch

sudo apt install python3-full python3-venv

installieren.

Wal

@dieter_p ,
du wirst aber ESPHome in der virt. Umgebung neu installieren müssen.

Thomas Braun

@dieter_p

Ich hätte das ja in ein em eigenen Verzeichnis gemacht...

Dieter_P

@wal ok, versuche es mit pip wie du es oben gezeigt hast hast nur in der virtuellen Umgebung

Wal

@dieter_p sagte in ESPHome: Reinstallation aber wie?:

@wal ok, versuche es mit pip wie du es oben gezeigt hast hast nur in der virtuellen Umgebung

Gehe doch einfach die Anleitung auf ESPHome durch.
ESPHome

danach die CLI-Anleitung

Thomas Braun

@dieter_p

echad@chet:~ $ mkdir esphome
echad@chet:~ $ cd esphome/
echad@chet:~/esphome $ python3 -m venv venv
echad@chet:~/esphome $ source venv/bin/activate
(venv) echad@chet:~/esphome $ pip3 install esphome

Man beachte das (venv) im login prompt.

Wal

@thomas-braun ,
hält die virt, Umgebung einem reboot stand ? Habe da noch keine großen Aktien drin.

Dieter_P

@thomas-braun said in ESPHome: Reinstallation aber wie?:

@dieter_p

echad@chet:~ $ mkdir esphome
echad@chet:~ $ cd esphome/
echad@chet:~/esphome $ python3 -m venv venv
echad@chet:~/esphome $ source venv/bin/activate
(venv) echad@chet:~/esphome $ pip3 install esphome

Man beachte das (venv) im login prompt.

Danke. Ist das Verständnis korreckt, dass Du in der virtuellen Umgebung einen Ordner "esphome" zur Installation vorsiehst, ich es nun aber einfach ins "root"-Verzeichnis installiert hab?

pi@iobroker:~ $ python3 --version
Python 3.9.2
pi@iobroker:~ $ python3 -m venv venv
pi@iobroker:~ $ source venv/bin/activate
(venv) pi@iobroker:~ $ pip3 install esphome

Thomas Braun

@wal sagte in ESPHome: Reinstallation aber wie?:

hält die virt, Umgebung einem reboot stand ? Habe da noch keine großen Aktien drin.

Ich auch nicht. Hab das gerade zum ersten mal installiert...

Alternativ geht es wohl auch mit

echad@chet:~/esphome $ pipx install esphome
  installed package esphome 2023.3.1, installed using Python 3.11.2
  These apps are now globally available
    - esphome
done! ✨ 🌟 ✨
echad@chet:~/esphome $ esp
espefuse   esphome    espsecure  esptool
echad@chet:~/esphome $ esphome

Wal

@dieter_p ,
das geht auch, versuche es doch einfach.

Thomas Braun

@dieter_p

Ja, du hast dein gesamtes home jetzt zum venv gemacht. Scheint mir falsch zu sein. Ich würde für solche Installationen immer ein eigenes Verzeichnis nehmen.

Wal

@thomas-braun ,
er hat ja mehrere Versuche, Versuch macht gluch.

Edit: ich sehe i.M. in der Anleitung auch kein extra Verzeichnis, für die Übersicht währe das besser.

Community Forum

NEWS

ESPHome: Reinstallation aber wie?

Support us

658

32.4k

81.4k

1.3m