Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[UHU01]

@thomas-braun
Ähh, das ist das Protokoll aus der IO-Broker Oberfläche. Wie muss ich denn vorgehen um an das andere zu kommen? Habe ich noch nie gemacht.

[Thomas Braun]

@uhu01

iob logs --watch | uniq

anschauen, Ausgabe von

ls -lAh /dev/serial/by-id

prüfen.

[UHU01]

@thomas-braun
Der Pfad scheint zu stimmen.
Hier das LOG:

2023-03-2515:10:58.569-info:host.raspberrypi"system.adapter.zigbee.0"disabled
2023-03-2515:10:58.572-info:host.raspberrypistopInstancesystem.adapter.zigbee.0(force=false,process=true)
2023-03-2515:10:58.581-info:zigbee.0(13088)GotterminatesignalTERMINATE_YOURSELF
2023-03-2515:10:58.639-info:host.raspberrypistopInstancesystem.adapter.zigbee.0sendkillsignal
2023-03-2515:10:58.583-info:zigbee.0(13088)cleanedeverythingup...
2023-03-2515:10:58.586-info:zigbee.0(13088)Zigbee:disablingjoiningnewdevices.
2023-03-2515:10:58.696-warn:zigbee.0(13088)Failedtostopzigbeeduringstartup
2023-03-2515:10:58.697-info:zigbee.0(13088)terminating
2023-03-2515:10:58.699-info:zigbee.0(13088)Terminated(ADAPTER_REQUESTED_TERMINATION):Withoutreason
2023-03-2515:10:59.329-info:host.raspberrypiinstancesystem.adapter.zigbee.0terminatedwithcode11(ADAPTER_REQUESTED_TERMINATION)
2023-03-2515:11:02.563-info:host.raspberrypi"system.adapter.zigbee.0"enabled
2023-03-2515:11:03.121-info:host.raspberrypiinstancesystem.adapter.zigbee.0startedwithpid15126
2023-03-2515:11:08.522-info:zigbee.0(15126)starting.Version1.8.10in/opt/iobroker/node_modules/iobroker.zigbee,node:v16.19.0,js-controller:4.0.24
2023-03-2515:11:08.718-info:zigbee.0(15126)deleteoldBackupfiles.keeponlylast10
2023-03-2515:11:08.721-info:zigbee.0(15126)StartingZigbeenpm...
2023-03-2515:11:09.475-info:zigbee.0(15126)InstalledVersion:iobroker.zigbee@1.8.10
2023-03-2515:11:09.654-error:zigbee.0(15126)Configurationisnotconsistentwithadapterstate/backup!
2023-03-2515:11:09.655-error:zigbee.0(15126)-PANID:configured=6753,adapter=6754
2023-03-2515:11:09.657-error:zigbee.0(15126)-ExtendedPANID:configured=00124b0026b877e1,adapter=00124b0026b877e1
2023-03-2515:11:09.658-error:zigbee.0(15126)-NetworkKey:configured=01030507090b0d0f00020406080a0c0d,adapter=01030507090b0d0f00020406080a0c0d
2023-03-2515:11:09.659-error:zigbee.0(15126)-ChannelList:configured=11,adapter=11
2023-03-2515:11:09.660-error:zigbee.0(15126)Pleaseupdateconfigurationtopreventfurtherissues.
2023-03-2515:11:09.660-error:zigbee.0(15126)Ifyouwishtore-commissionyournetwork,pleaseremovecoordinatorbackupat/opt/iobroker/iobroker-data/zigbee_0/nvbackup.json.
2023-03-2515:11:09.662-error:zigbee.0(15126)Re-commissioningyournetworkwillrequirere-pairingofalldevices!
2023-03-2515:11:09.861-error:zigbee.0(15126)Startingzigbee-herdsmanproblem:"startupfailed-configuration-adaptermismatch-seelogsaboveformoreinformation"
2023-03-2515:11:09.862-error:zigbee.0(15126)FailedtostartZigbee
2023-03-2515:11:09.862-error:zigbee.0(15126)Errorherdsmanstart
2023-03-2515:11:19.866-info:zigbee.0(15126)Trytoreconnect.1attemptsleft
2023-03-2515:11:19.867-info:zigbee.0(15126)StartingZigbeenpm...
2023-03-2515:11:19.897-info:zigbee.0(15126)InstalledVersion:iobroker.zigbee@1.8.10
2023-03-2515:11:20.149-error:zigbee.0(15126)Startingzigbee-herdsmanproblem:"Errorwhileopeningserialport'Error:ErrorResourcetemporarilyunavailableCannotlockport'"
2023-03-2515:11:20.152-error:zigbee.0(15126)FailedtostartZigbee
2023-03-2515:11:20.154-error:zigbee.0(15126)Errorherdsmanstart

[Thomas Braun]

@uhu01 sagte in Hilfe beim Einrichten von Sonoff Zigbee 3.0 USB Dongle Plus:

Der Pfad scheint zu stimmen.

Und wenn du genau schaust und die Ausgabe hier zum Besten gibst?
Mit 'scheinbaren Dingen' aus Nacherzählungen kann man nix anfangen.

Und wo sind die Leerzeichen hin?
Wie kopierst du das womit woher?

So (ähnlich) soll das aussehen:

2023-03-25 15:18:36.256  - info: host.chet instance system.adapter.zigbee.0 started with pid 368095
2023-03-25 15:18:40.908  - info: zigbee.0 (368095) starting. Version 1.8.10 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.15.0, js-controller: 4.0.24
2023-03-25 15:18:41.056  - info: zigbee.0 (368095) delete old Backup files. keep only last 10
2023-03-25 15:18:41.058  - info: zigbee.0 (368095) Starting Zigbee  npm ...
2023-03-25 15:18:41.721  - info: zigbee.0 (368095) Installed Version: iobroker.zigbee@1.8.10
2023-03-25 15:18:53.842  - info: zigbee.0 (368095) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20221226}}
2023-03-25 15:18:53.854  - info: zigbee.0 (368095) Unable to disable LED, unsupported function.
2023-03-25 15:18:53.876  - info: zigbee.0 (368095)   --> transmitPower : normal
2023-03-25 15:18:53.883  - info: zigbee.0 (368095) Currently no devices.
2023-03-25 15:18:53.885  - info: zigbee.0 (368095) Zigbee started

[Thomas Braun]

@uhu01 sagte in Hilfe beim Einrichten von Sonoff Zigbee 3.0 USB Dongle Plus:

2023-03-2515:11:09.654-error:zigbee.0(15126)Configurationisnotconsistentwithadapterstate/backup!

2023-03-2515:11:09.655-error:zigbee.0(15126)-PANID:configured=6753,adapter=6754

Die PAN-ID muss übereinstimmen. Also im Adapter anpassen.

[UHU01]

@thomas-braun
hier die Ausgabe:

lrwxrwxrwx 1 root root 13 25. Mär 12:47 usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 -> ../../ttyUSB0

Und der Eintrag im Adapter:

/dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0

Und nochnal ein neues Log. Ist direkt aus Putty kopiert.

2023-03-25 15:37:07.313  - info: zigbee.0 (15126) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"Silicon Labs","serialNumber":"0001","pnpId":"usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyAMA0"}]
2023-03-25 15:37:20.987  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true)
2023-03-25 15:37:20.998  - info: zigbee.0 (15126) Got terminate signal TERMINATE_YOURSELF
2023-03-25 15:37:21.041  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal
2023-03-25 15:37:21.000  - info: zigbee.0 (15126) cleaned everything up...
2023-03-25 15:37:21.006  - info: zigbee.0 (15126) Zigbee: disabling joining new devices.
2023-03-25 15:37:21.125  - warn: zigbee.0 (15126) Failed to stop zigbee during startup
2023-03-25 15:37:21.126  - info: zigbee.0 (15126) terminating
2023-03-25 15:37:21.128  - info: zigbee.0 (15126) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-03-25 15:37:21.716  - info: admin.0 (8202) <== Disconnect system.user.admin from ::ffff:192.168.178.241
2023-03-25 15:37:21.829  - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-03-25 15:37:24.299  - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 31775
2023-03-25 15:37:30.150  - info: zigbee.0 (31775) starting. Version 1.8.10 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.0, js-controller: 4.0.24
2023-03-25 15:37:30.295  - info: zigbee.0 (31775) delete old Backup files. keep only last 10
2023-03-25 15:37:30.298  - info: zigbee.0 (31775) Starting Zigbee  npm ...
2023-03-25 15:37:31.056  - info: zigbee.0 (31775) Installed Version: iobroker.zigbee@1.8.10
2023-03-25 15:37:33.953  - info: zigbee.0 (31775) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20210708}}
2023-03-25 15:37:33.966  - info: zigbee.0 (31775) Unable to disable LED, unsupported function.
2023-03-25 15:37:34.032  - info: zigbee.0 (31775)   --> transmitPower : normal
2023-03-25 15:37:34.041  - info: zigbee.0 (31775) Currently no devices.
2023-03-25 15:37:34.044  - info: zigbee.0 (31775) Zigbee started
2023-03-25 15:37:34.055  - error: zigbee.0 (31775) Unable to apply ExtPanID changes: Error: SRSP - SYS - osalNvRead after 0,2ms
2023-03-25 15:37:34.242  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true)
2023-03-25 15:37:34.252  - info: zigbee.0 (31775) Got terminate signal TERMINATE_YOURSELF
2023-03-25 15:37:34.254  - info: zigbee.0 (31775) cleaned everything up...
2023-03-25 15:37:34.256  - info: zigbee.0 (31775) Zigbee: disabling joining new devices.
2023-03-25 15:37:34.289  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal
2023-03-25 15:37:34.755  - info: zigbee.0 (31775) terminating
2023-03-25 15:37:34.758  - info: zigbee.0 (31775) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-03-25 15:37:35.295  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 killing pid 31775
2023-03-25 15:37:35.444  - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-03-25 15:37:37.465  - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 31980
2023-03-25 15:37:42.769  - info: zigbee.0 (31980) starting. Version 1.8.10 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.0, js-controller: 4.0.24
2023-03-25 15:37:42.932  - info: zigbee.0 (31980) delete old Backup files. keep only last 10
2023-03-25 15:37:42.935  - info: zigbee.0 (31980) Starting Zigbee  npm ...
2023-03-25 15:37:43.743  - info: zigbee.0 (31980) Installed Version: iobroker.zigbee@1.8.10
2023-03-25 15:37:43.894  - error: zigbee.0 (31980) Configuration is not consistent with adapter state/backup!
2023-03-25 15:37:43.895  - error: zigbee.0 (31980) - PAN ID: configured=6754, adapter=6754
2023-03-25 15:37:43.895  - error: zigbee.0 (31980) - Extended PAN ID: configured=6b2ac77581741024, adapter=00124b0026b877e1
2023-03-25 15:37:43.896  - error: zigbee.0 (31980) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d
2023-03-25 15:37:43.897  - error: zigbee.0 (31980) - Channel List: configured=11, adapter=11
2023-03-25 15:37:43.898  - error: zigbee.0 (31980) Please update configuration to prevent further issues.
2023-03-25 15:37:43.899  - error: zigbee.0 (31980) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json.
2023-03-25 15:37:43.899  - error: zigbee.0 (31980) Re-commissioning your network will require re-pairing of all devices!
2023-03-25 15:37:44.068  - error: zigbee.0 (31980) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information"
2023-03-25 15:37:44.069  - error: zigbee.0 (31980) Failed to start Zigbee
2023-03-25 15:37:44.070  - error: zigbee.0 (31980) Error herdsman start
2023-03-25 15:37:54.075  - info: zigbee.0 (31980) Try to reconnect. 1 attempts left
2023-03-25 15:37:54.076  - info: zigbee.0 (31980) Starting Zigbee  npm ...
2023-03-25 15:37:54.120  - info: zigbee.0 (31980) Installed Version: iobroker.zigbee@1.8.10
2023-03-25 15:37:54.372  - error: zigbee.0 (31980) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"
2023-03-25 15:37:54.373  - error: zigbee.0 (31980) Failed to start Zigbee
2023-03-25 15:37:54.374  - error: zigbee.0 (31980) Error herdsman start
2023-03-25 15:37:58.384  - info: host.raspberrypi "system.adapter.zigbee.0" disabled
2023-03-25 15:37:58.384  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true)
2023-03-25 15:37:58.395  - info: zigbee.0 (31980) Got terminate signal TERMINATE_YOURSELF
2023-03-25 15:37:58.397  - info: zigbee.0 (31980) cleaned everything up...
2023-03-25 15:37:58.406  - info: zigbee.0 (31980) Zigbee: disabling joining new devices.
2023-03-25 15:37:58.462  - warn: zigbee.0 (31980) Failed to stop zigbee during startup
2023-03-25 15:37:58.463  - info: zigbee.0 (31980) terminating
2023-03-25 15:37:58.466  - info: zigbee.0 (31980) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-03-25 15:37:58.588  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal
2023-03-25 15:37:59.101  - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-03-25 15:38:01.241  - info: host.raspberrypi "system.adapter.zigbee.0" enabled
2023-03-25 15:38:01.582  - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 32191
2023-03-25 15:38:07.197  - info: zigbee.0 (32191) starting. Version 1.8.10 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.0, js-controller: 4.0.24
2023-03-25 15:38:07.373  - info: zigbee.0 (32191) delete old Backup files. keep only last 10
2023-03-25 15:38:07.376  - info: zigbee.0 (32191) Starting Zigbee  npm ...
2023-03-25 15:38:08.268  - info: zigbee.0 (32191) Installed Version: iobroker.zigbee@1.8.10
2023-03-25 15:38:08.421  - error: zigbee.0 (32191) Configuration is not consistent with adapter state/backup!
2023-03-25 15:38:08.422  - error: zigbee.0 (32191) - PAN ID: configured=6754, adapter=6754
2023-03-25 15:38:08.423  - error: zigbee.0 (32191) - Extended PAN ID: configured=6b2ac77581741024, adapter=00124b0026b877e1
2023-03-25 15:38:08.424  - error: zigbee.0 (32191) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d
2023-03-25 15:38:08.425  - error: zigbee.0 (32191) - Channel List: configured=11, adapter=11
2023-03-25 15:38:08.425  - error: zigbee.0 (32191) Please update configuration to prevent further issues.
2023-03-25 15:38:08.426  - error: zigbee.0 (32191) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json.
2023-03-25 15:38:08.427  - error: zigbee.0 (32191) Re-commissioning your network will require re-pairing of all devices!
2023-03-25 15:38:08.595  - error: zigbee.0 (32191) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information"
2023-03-25 15:38:08.596  - error: zigbee.0 (32191) Failed to start Zigbee
2023-03-25 15:38:08.597  - error: zigbee.0 (32191) Error herdsman start
2023-03-25 15:38:13.204  - info: admin.0 (8202) ==> Connected system.user.admin from ::ffff:192.168.178.241
2023-03-25 15:38:13.362  - error: zigbee.0 (32191) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2023-03-25 15:38:13.593  - info: zigbee.0 (32191) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"Silicon Labs","serialNumber":"0001","pnpId":"usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyAMA0"}]
2023-03-25 15:38:18.601  - info: zigbee.0 (32191) Try to reconnect. 1 attempts left
2023-03-25 15:38:18.602  - info: zigbee.0 (32191) Starting Zigbee  npm ...
2023-03-25 15:38:18.648  - info: zigbee.0 (32191) Installed Version: iobroker.zigbee@1.8.10
2023-03-25 15:38:18.917  - error: zigbee.0 (32191) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"
2023-03-25 15:38:18.918  - error: zigbee.0 (32191) Failed to start Zigbee
2023-03-25 15:38:18.918  - error: zigbee.0 (32191) Error herdsman start
2023-03-25 15:38:26.219  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true)
2023-03-25 15:38:26.226  - info: zigbee.0 (32191) Got terminate signal TERMINATE_YOURSELF
2023-03-25 15:38:26.269  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal
2023-03-25 15:38:26.228  - info: zigbee.0 (32191) cleaned everything up...
2023-03-25 15:38:26.236  - info: zigbee.0 (32191) Zigbee: disabling joining new devices.
2023-03-25 15:38:26.288  - warn: zigbee.0 (32191) Failed to stop zigbee during startup
2023-03-25 15:38:26.289  - info: zigbee.0 (32191) terminating
2023-03-25 15:38:26.291  - info: zigbee.0 (32191) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-03-25 15:38:26.928  - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-03-25 15:38:27.067  - info: admin.0 (8202) <== Disconnect system.user.admin from ::ffff:192.168.178.241
2023-03-25 15:38:29.749  - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 32552
2023-03-25 15:38:34.927  - info: zigbee.0 (32552) starting. Version 1.8.10 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.0, js-controller: 4.0.24
2023-03-25 15:38:35.116  - info: zigbee.0 (32552) delete old Backup files. keep only last 10
2023-03-25 15:38:35.120  - info: zigbee.0 (32552) Starting Zigbee  npm ...
2023-03-25 15:38:35.800  - info: zigbee.0 (32552) Installed Version: iobroker.zigbee@1.8.10
2023-03-25 15:38:35.951  - error: zigbee.0 (32552) Configuration is not consistent with adapter state/backup!
2023-03-25 15:38:35.952  - error: zigbee.0 (32552) - PAN ID: configured=6753, adapter=6754
2023-03-25 15:38:35.953  - error: zigbee.0 (32552) - Extended PAN ID: configured=6b2ac77581741024, adapter=00124b0026b877e1
2023-03-25 15:38:35.953  - error: zigbee.0 (32552) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d
2023-03-25 15:38:35.954  - error: zigbee.0 (32552) - Channel List: configured=11, adapter=11
2023-03-25 15:38:35.955  - error: zigbee.0 (32552) Please update configuration to prevent further issues.
2023-03-25 15:38:35.956  - error: zigbee.0 (32552) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json.
2023-03-25 15:38:35.956  - error: zigbee.0 (32552) Re-commissioning your network will require re-pairing of all devices!
2023-03-25 15:38:36.123  - error: zigbee.0 (32552) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information"
2023-03-25 15:38:36.124  - error: zigbee.0 (32552) Failed to start Zigbee
2023-03-25 15:38:36.124  - error: zigbee.0 (32552) Error herdsman start
2023-03-25 15:38:46.130  - info: zigbee.0 (32552) Try to reconnect. 1 attempts left
2023-03-25 15:38:46.131  - info: zigbee.0 (32552) Starting Zigbee  npm ...
2023-03-25 15:38:46.183  - info: zigbee.0 (32552) Installed Version: iobroker.zigbee@1.8.10
2023-03-25 15:38:46.470  - error: zigbee.0 (32552) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"
2023-03-25 15:38:46.471  - error: zigbee.0 (32552) Failed to start Zigbee
2023-03-25 15:38:46.472  - error: zigbee.0 (32552) Error herdsman start
2023-03-25 15:39:21.701  - info: admin.0 (8202) ==> Connected system.user.admin from ::ffff:192.168.178.241
2023-03-25 15:39:21.973  - error: zigbee.0 (32552) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2023-03-25 15:39:22.212  - info: zigbee.0 (32552) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"Silicon Labs","serialNumber":"0001","pnpId":"usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyAMA0"}]
2023-03-25 15:39:30.643  - info: host.raspberrypi "system.adapter.zigbee.0" disabled
2023-03-25 15:39:30.644  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true)
2023-03-25 15:39:30.692  - info: zigbee.0 (32552) Got terminate signal TERMINATE_YOURSELF
2023-03-25 15:39:30.693  - info: zigbee.0 (32552) cleaned everything up...
2023-03-25 15:39:30.699  - info: zigbee.0 (32552) Zigbee: disabling joining new devices.
2023-03-25 15:39:30.815  - warn: zigbee.0 (32552) Failed to stop zigbee during startup
2023-03-25 15:39:30.817  - info: zigbee.0 (32552) terminating
2023-03-25 15:39:30.819  - info: zigbee.0 (32552) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-03-25 15:39:30.914  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal
2023-03-25 15:39:31.450  - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-03-25 15:39:33.294  - info: admin.0 (8202) <== Disconnect system.user.admin from ::ffff:192.168.178.241
2023-03-25 15:39:37.090  - info: host.raspberrypi "system.adapter.zigbee.0" enabled
2023-03-25 15:39:37.400  - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 858
2023-03-25 15:39:42.719  - info: zigbee.0 (858) starting. Version 1.8.10 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.0, js-controller: 4.0.24
2023-03-25 15:39:42.859  - info: zigbee.0 (858) delete old Backup files. keep only last 10
2023-03-25 15:39:42.861  - info: zigbee.0 (858) Starting Zigbee  npm ...
2023-03-25 15:39:43.741  - info: zigbee.0 (858) Installed Version: iobroker.zigbee@1.8.10
2023-03-25 15:39:43.899  - error: zigbee.0 (858) Configuration is not consistent with adapter state/backup!
2023-03-25 15:39:43.901  - error: zigbee.0 (858) - PAN ID: configured=6754, adapter=6754
2023-03-25 15:39:43.902  - error: zigbee.0 (858) - Extended PAN ID: configured=6b2ac77581741024, adapter=00124b0026b877e1
2023-03-25 15:39:43.903  - error: zigbee.0 (858) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d
2023-03-25 15:39:43.904  - error: zigbee.0 (858) - Channel List: configured=11, adapter=11
2023-03-25 15:39:43.906  - error: zigbee.0 (858) Please update configuration to prevent further issues.
2023-03-25 15:39:43.907  - error: zigbee.0 (858) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json.
2023-03-25 15:39:43.907  - error: zigbee.0 (858) Re-commissioning your network will require re-pairing of all devices!
2023-03-25 15:39:44.094  - error: zigbee.0 (858) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information"
2023-03-25 15:39:44.095  - error: zigbee.0 (858) Failed to start Zigbee
2023-03-25 15:39:44.096  - error: zigbee.0 (858) Error herdsman start
2023-03-25 15:39:54.102  - info: zigbee.0 (858) Try to reconnect. 1 attempts left
2023-03-25 15:39:54.103  - info: zigbee.0 (858) Starting Zigbee  npm ...
2023-03-25 15:39:54.136  - info: zigbee.0 (858) Installed Version: iobroker.zigbee@1.8.10
2023-03-25 15:39:54.505  - error: zigbee.0 (858) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"
2023-03-25 15:39:54.507  - error: zigbee.0 (858) Failed to start Zigbee
2023-03-25 15:39:54.508  - error: zigbee.0 (858) Error herdsman start
2023-03-25 15:41:21.022  - info: admin.0 (8202) ==> Connected system.user.admin from ::ffff:192.168.178.241
2023-03-25 15:41:21.204  - error: zigbee.0 (858) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2023-03-25 15:41:21.370  - info: zigbee.0 (858) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"Silicon Labs","serialNumber":"0001","pnpId":"usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyAMA0"}]

[Thomas Braun]

@uhu01 sagte in Hilfe beim Einrichten von Sonoff Zigbee 3.0 USB Dongle Plus:

Extended PAN ID: configured=6b2ac77581741024, adapter=00124b0026b877e1

Anpassen.

[Thomas Braun]

@uhu01 sagte in Hilfe beim Einrichten von Sonoff Zigbee 3.0 USB Dongle Plus:

node: v16.19.0

könntest du auf die aktuelle Empfehlung nodejs@18 bringen.

[Thomas Braun]

@uhu01

Den Chipsatztyp musst du wohl auch von TI Z-Stack/CCxxxx
auf Silicon Labs EZSP/EFR32 setzen.

[UHU01]

@thomas-braun

nodejs aktualisiert,
mehrfach die Extended PAN ID aktualisiert,
mehrfach den Adaper neu gestartet,
jetzt funktioniert es!

Danke Dir vielmals!

P.S. TI Z-Stack/CCxxxx war aber richtig, zumindest habe ich es nicht geändert.

[Honnkoponko]

@uhu01

hallo könntest du mir bitte sagen wie kann ich SonOff installieren?
Muss ich nur Instanz/Adapter einfügen oder zuerst muss ich etwas mit USB installieren? Gibt es eine Anleitung wie ich das machen soll?

[Asgothian]

@honnkoponko sagte in Hilfe beim Einrichten von Sonoff Zigbee 3.0 USB Dongle Plus:

@uhu01

hallo könntest du mir bitte sagen wie kann ich SonOff installieren?
Muss ich nur Instanz/Adapter einfügen oder zuerst muss ich etwas mit USB installieren? Gibt es eine Anleitung wie ich das machen soll?

unter der Bedingung das du einfach einen nativ installierten ioBroker hast:

• Zigbee Adapter installieren, NICHT starten
• Im Zigbee-Adapter den seriellen Port vom Sonoff Stick eintragen (entweder /dev/ttyAM... oder /dev/serial/by-id/...
• Korrekte Firmware aussuchen (ember bei Dongle-E, TI-ZStack bei Dongle-P)
• PanID und ExtPanID anpassen
• Adapter starten

A.

[Honnkoponko]

@asgothian
danke
wäre es möglich dass du mir schreibst wie jeder Punkt kann ich machen? Ich kenne mich nicht aus mit Befehle und Konsole leider...

[Honnkoponko]

Hallo @Thomas-Braun

Könntest du mir auch mit USB SonOff helfen ich bekomme folgendes Fehler

2024-11-18 11:51:00.730  - info: host.domiobroker77 "system.adapter.zigbee.0" disabled
2024-11-18 11:51:00.731  - info: host.domiobroker77 stopInstance system.adapter.zigbee.0 (force=false, process=true)
2024-11-18 11:51:00.739  - info: zigbee.0 (1725) Got terminate signal TERMINATE_YOURSELF
2024-11-18 11:51:00.742  - info: zigbee.0 (1725) cleaned everything up...
2024-11-18 11:51:00.754  - info: zigbee.0 (1725) Zigbee: disabling joining new devices.
2024-11-18 11:51:00.774  - warn: zigbee.0 (1725) Failed to stop zigbee during startup
2024-11-18 11:51:00.775  - info: zigbee.0 (1725) terminating
2024-11-18 11:51:00.776  - debug: zigbee.0 (1725) Plugin sentry destroyed
2024-11-18 11:51:00.777  - info: zigbee.0 (1725) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-11-18 11:51:00.830  - info: host.domiobroker77 stopInstance system.adapter.zigbee.0 send kill signal
2024-11-18 11:51:01.245  - info: zigbee.0 (1725) terminating
2024-11-18 11:51:01.366  - info: host.domiobroker77 instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-11-18 11:51:11.212  - info: host.domiobroker77 "system.adapter.zigbee.0" enabled
2024-11-18 11:51:11.663  - info: host.domiobroker77 instance system.adapter.zigbee.0 in version "1.10.3" started with pid 1835
2024-11-18 11:51:15.573  - debug: zigbee.0 (1835) Redis Objects: Use Redis connection: 127.0.0.1:9001
2024-11-18 11:51:15.620  - debug: zigbee.0 (1835) Objects client ready ... initialize now
2024-11-18 11:51:15.623  - debug: zigbee.0 (1835) Objects create System PubSub Client
2024-11-18 11:51:15.625  - debug: zigbee.0 (1835) Objects create User PubSub Client
2024-11-18 11:51:15.697  - debug: zigbee.0 (1835) Objects client initialize lua scripts
2024-11-18 11:51:15.709  - debug: zigbee.0 (1835) Objects connected to redis: 127.0.0.1:9001
2024-11-18 11:51:15.753  - debug: zigbee.0 (1835) Redis States: Use Redis connection: 127.0.0.1:9000
2024-11-18 11:51:15.773  - debug: zigbee.0 (1835) States create System PubSub Client
2024-11-18 11:51:15.775  - debug: zigbee.0 (1835) States create User PubSub Client
2024-11-18 11:51:15.847  - debug: zigbee.0 (1835) States connected to redis: 127.0.0.1:9000
2024-11-18 11:51:15.891  - debug: zigbee.0 (1835) Plugin sentry Initialize Plugin (enabled=true)
2024-11-18 11:51:16.397  - info: zigbee.0 (1835) starting. Version 1.10.3 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.16.0, js-controller: 6.0.9
2024-11-18 11:51:16.446  - debug: zigbee.0 (1835) Using zigbee-herdsman with settings: {"network":{"panID":6754,"channelList":[11],"networkKey":[1,3,5,7,9,11,13,15,0,2,4,6,8,10,12,13],"extenedPanID":[139,122,111,94,77,60,43,26]},"databasePath":"/opt/iobroker/iobroker-data/zigbee_0/shepherd.db","backupPath":"/opt/iobroker/iobroker-data/zigbee_0/nvbackup.json","serialPort":{"baudRate":115200,"rtscts":false,"path":"/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_5a52e2baefdbed118632e92d62c613ac-if00-port0","adapter":"zstack"},"adapter":{"forceStartWithInconsistentAdapterConfiguration":false},"legacy":false}
2024-11-18 11:51:16.535  - info: zigbee.0 (1835) delete old Backup files. keep only last 10
2024-11-18 11:51:16.537  - info: zigbee.0 (1835) Starting Zigbee  npm ...
2024-11-18 11:51:16.600  - debug: zigbee.0 (1835) Starting zigbee-herdsman...
2024-11-18 11:51:17.011  - info: zigbee.0 (1835) Installed Version: iobroker.zigbee@1.10.3
2024-11-18 11:51:17.405  - debug: zigbee.0 (1835) Backup /opt/iobroker/iobroker-data/zigbee_0/backup_2024_11_18-11_51_16.tar.gz success
2024-11-18 11:51:37.754  - error: zigbee.0 (1835) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
2024-11-18 11:51:37.755  - error: zigbee.0 (1835) Failed to start Zigbee
2024-11-18 11:51:37.756  - error: zigbee.0 (1835) Error herdsman start
2024-11-18 11:51:47.761  - info: zigbee.0 (1835) Try to reconnect. 1 attempts left
2024-11-18 11:51:47.762  - info: zigbee.0 (1835) Starting Zigbee  npm ...
2024-11-18 11:51:47.769  - debug: zigbee.0 (1835) Starting zigbee-herdsman...
2024-11-18 11:51:47.779  - info: zigbee.0 (1835) Installed Version: iobroker.zigbee@1.10.3
2024-11-18 11:51:47.975  - error: zigbee.0 (1835) Starting zigbee-herdsman problem : "Error Resource temporarily unavailable Cannot lock port"
2024-11-18 11:51:47.978  - error: zigbee.0 (1835) Failed to start Zigbee
2024-11-18 11:51:47.979  - error: zigbee.0 (1835) Error herdsman start

Hier ich liste was ich gemacht habe:

1. Mit

/dev/serial/by-id/

Habe ich Device bekommen:

mwit@domiobroker77:~ $ ls /dev/serial/by-id/
usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_5a52e2baefdbed118632e92d62c613ac-if00-port0

2. In Adapter Setting habe ich das eingetragen (mit DevID und ExtDevID)
   

Adapter started und will nicht grün sein...;(

Was kann ich dort anpassen?

Wie kann ich aus Putty nur zigbee Logs zeigen?
Mit

mwit@domiobroker77:~ $ iob logs --watch | uniq

Zeig alle Adapter Logs. Kann ich das irgendwie filtern?

[haselchen]

@honnkoponko

Es reicht ja wenn du das Log vom Adapterstart zeigst.
Eventuell im Adapter noch den Debug Modus anschalten.

[Thomas Braun]

@honnkoponko sagte in Hilfe beim Einrichten von Sonoff Zigbee 3.0 USB Dongle Plus:

2024-11-18 11:51:37.754 - error: zigbee.0 (1835) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"

Deutet auf Trouble mit der Firmware hin. Steck das Ding mal aus und nach ein paar Minuten wieder ein. Betreibst du den Stick an einer USB-Verlängerung?

Ordentlicher Reboot schadet auch nichts.

[Honnkoponko]

@thomas-braun

Reboot habe ich gemacht
Ich probiere noch mit rein und raus

Ich nutze USB Verlängerung (nicht möglich direkt in USB port einstecken)
Ist das fixierbar oder einfacher CC2652P Zigbee Dongle kaufen? (habe ich gelesen CC2531 haben Probleme)

Soll ich andere USB Port versuchen - macht das Sinn?

[Thomas Braun]

@honnkoponko sagte in Hilfe beim Einrichten von Sonoff Zigbee 3.0 USB Dongle Plus:

(habe ich gelesen CC2531 haben Probleme)

Ja, aber der Sonoff 3.0 hat ohnehin einen anderen Chipsatz, nicht den CC2531.

Ich weiß nie, welchen der beiden bei Sonoff gerade verwendet wird. Stell mal testweise den Stack auf EZSP (oder so ähnlich) um.

[Honnkoponko]

@thomas-braun

Habe ich rein raus gemacht und nichts.

Für EZSP EInstellung:

zigbee.0
PID
Time
debug
Message

zigbee.0
2052	2024-11-18 12:48:57.567	error	Error herdsman start

zigbee.0
2052	2024-11-18 12:48:57.567	error	Failed to start Zigbee

zigbee.0
2052	2024-11-18 12:48:57.566	error	Starting zigbee-herdsman problem : "Failure to connect"

zigbee.0
2052	2024-11-18 12:48:27.322	info	Installed Version: iobroker.zigbee@1.10.3

zigbee.0
2052	2024-11-18 12:48:27.312	debug	Starting zigbee-herdsman...

zigbee.0
2052	2024-11-18 12:48:27.304	info	Starting Zigbee npm ...

zigbee.0
2052	2024-11-18 12:48:27.303	info	Try to reconnect. 1 attempts left

zigbee.0
2052	2024-11-18 12:48:17.297	error	Error herdsman start

zigbee.0
2052	2024-11-18 12:48:17.296	error	Failed to start Zigbee

zigbee.0
2052	2024-11-18 12:48:17.294	error	Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information"

Ich habe ZBDongle-E so ich denke es ist CC2652P CHipset
Einstellung sollte TI Z-Stack/CCxxxx sein

Was kann ich noch probieren?

Andere USB Port oder was?
DOngle ist in USB 2.0 - soll ich USB 3.0 nutzen?
Oder USB-Verlängerung ist zu lange - ich habe 5m...Kann das Probleme machen?

[Asgothian]

@honnkoponko sagte in Hilfe beim Einrichten von Sonoff Zigbee 3.0 USB Dongle Plus:

@thomas-braun

Habe ich rein raus gemacht und nichts.

Für EZSP EInstellung:

zigbee.0
PID
Time
debug
Message

zigbee.0
2052	2024-11-18 12:48:57.567	error	Error herdsman start

zigbee.0
2052	2024-11-18 12:48:57.567	error	Failed to start Zigbee

zigbee.0
2052	2024-11-18 12:48:57.566	error	Starting zigbee-herdsman problem : "Failure to connect"

zigbee.0
2052	2024-11-18 12:48:27.322	info	Installed Version: iobroker.zigbee@1.10.3

zigbee.0
2052	2024-11-18 12:48:27.312	debug	Starting zigbee-herdsman...

zigbee.0
2052	2024-11-18 12:48:27.304	info	Starting Zigbee npm ...

zigbee.0
2052	2024-11-18 12:48:27.303	info	Try to reconnect. 1 attempts left

zigbee.0
2052	2024-11-18 12:48:17.297	error	Error herdsman start

zigbee.0
2052	2024-11-18 12:48:17.296	error	Failed to start Zigbee

zigbee.0
2052	2024-11-18 12:48:17.294	error	Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information"

Ich habe ZBDongle-E so ich denke es ist CC2652P CHipset
Einstellung sollte TI Z-Stack/CCxxxx sein

Was kann ich noch probieren?

Andere USB Port oder was?
DOngle ist in USB 2.0 - soll ich USB 3.0 nutzen?
Oder USB-Verlängerung ist zu lange - ich habe 5m...Kann das Probleme machen?

Der Sonoff-ZBDongle-e sollte einen EZSP Chipsatz haben. Ansonsten beschwert sich der Adapter über eine inkonsistente Konfiguration. Daher bitte

• Adapter anhalten
• sicher gehen das kein Zigbee Prozess mehr läuft - das kann bis zu 20 Sekunden dauern
• die Datei nvbackup.json im Verzeichnis /opt/iobroker/iobroker-data/zigbee_0 löschen
• adapter wieder starten

A.