[Gelöst] hm-rega/ hm-rpc Absturz CCU3 und Datenpunkte fehlen
-
Hallo ich hoffe jemand kann mit weiterhelfen.
Ich habe hier zwei Probleme am start und benötige Hilfe.
- Bei Verbinungsaufbau mit CCU3 über den hm-rpc.0 (RFD) hängt sich die CCU3 auf.
- HM-RPC Homatic IP fehlende Datenpunkte bzw. keine in Kanal 1-7
192.168.178.28 CCU3 (Aktuelle Firmwareversion: 3.65.11)
192.168.178.20 Laptop mit iobroker-Installation
192.168.178.20 CallBack IPLaptop ist über die Fritzbox mit der CCU3 verbunden, allerdings unterschieliche LANs.
PlatformBetriebssystem:win32
Architektur:x64
CPUs:8
Geschwindigkeit:1992 MHz
Modell:Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
RAM:7.9 GB
System-Betriebszeit:18:08:12
Node.js:v16.15.1
time:1666668470804
timeOffset:-120
Adapter-Anzahl:443
NPM:8.11.0
Datenträgergröße:475.8 GB
Freier Festplattenspeicher:107.0 GB
Betriebszeit:18:07:51
Aktive Instanzen:12
Pfad:C:\ioBroker
aktiv:true
_nodeCurrent:16.15.1
_nodeNewest:16.18.0
_nodeNewestNext:16.18.0
_npmCurrent:8.11.0
_npmNewest:8.11.0
_npmNewestNext:8.19.2Meine Konfigurationen zu hm-rega, hm-rpc und ccu3:
Protokoll:
Das Protokoll sollte enthalten: Start der Instanzen, wobei hm-rpc.0 zuletzt gestartet wurde.
CCU3-Reset.2022-10-25 06:43:05.178 - info: host.TreloSpin "system.adapter.hm-rega.0" enabled 2022-10-25 06:43:05.262 - info: host.TreloSpin instance system.adapter.hm-rega.0 started with pid 21872 2022-10-25 06:43:06.420 - info: hm-rega.0 (21872) starting. Version 3.0.40 in C:/ioBroker/node_modules/iobroker.hm-rega, node: v16.15.1, js-controller: 4.0.23 2022-10-25 06:43:06.479 - info: hm-rega.0 (21872) subscribe hm-rpc.0.BidCoS-RF.50.PRESS_SHORT 2022-10-25 06:43:06.592 - info: hm-rega.0 (21872) ReGaHSS 192.168.178.28 up 2022-10-25 06:43:06.699 - info: hm-rega.0 (21872) time difference local-ccu 1s 2022-10-25 06:43:06.932 - info: hm-rega.0 (21872) request state values 2022-10-25 06:43:07.027 - info: hm-rega.0 (21872) Updated all datapoints 2022-10-25 06:43:07.032 - info: hm-rega.0 (21872) got 26 variables 2022-10-25 06:43:07.171 - info: hm-rega.0 (21872) added/updated 26 variables 2022-10-25 06:43:07.171 - info: hm-rega.0 (21872) deleted 0 variables 2022-10-25 06:43:07.175 - info: hm-rega.0 (21872) got 10 programs 2022-10-25 06:43:07.283 - info: hm-rega.0 (21872) added/updated 10 programs 2022-10-25 06:43:07.283 - info: hm-rega.0 (21872) deleted 0 programs 2022-10-25 06:43:07.305 - info: hm-rega.0 (21872) update rooms to enum.rooms 2022-10-25 06:43:07.337 - info: hm-rega.0 (21872) update functions to enum.functions 2022-10-25 06:43:07.359 - info: hm-rega.0 (21872) update favorites to enum.favorites 2022-10-25 06:45:00.134 - info: admin.0 (15524) ==> Connected system.user.admin from ::1 2022-10-25 06:45:30.345 - info: admin.0 (15524) <== Disconnect system.user.admin from ::1 2022-10-25 06:45:36.476 - info: admin.0 (15524) ==> Connected system.user.admin from ::1 2022-10-25 06:45:56.520 - info: host.TreloSpin stopInstance system.adapter.hm-rega.0 (force=false, process=true) 2022-10-25 06:45:56.521 - info: host.TreloSpin stopInstance system.adapter.hm-rega.0 send kill signal 2022-10-25 06:45:56.521 - info: hm-rega.0 (21872) Got terminate signal TERMINATE_YOURSELF 2022-10-25 06:45:56.541 - info: hm-rega.0 (21872) terminating 2022-10-25 06:45:56.541 - info: hm-rega.0 (21872) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2022-10-25 06:45:57.095 - info: host.TreloSpin instance system.adapter.hm-rega.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2022-10-25 06:45:59.560 - info: host.TreloSpin instance system.adapter.hm-rega.0 started with pid 24712 2022-10-25 06:46:00.422 - info: hm-rega.0 (24712) starting. Version 3.0.40 in C:/ioBroker/node_modules/iobroker.hm-rega, node: v16.15.1, js-controller: 4.0.23 2022-10-25 06:46:00.492 - info: hm-rega.0 (24712) subscribe hm-rpc.0.BidCoS-RF.50.PRESS_SHORT 2022-10-25 06:46:00.619 - info: hm-rega.0 (24712) ReGaHSS 192.168.178.28 up 2022-10-25 06:46:00.701 - info: hm-rega.0 (24712) time difference local-ccu 1s 2022-10-25 06:46:00.908 - info: hm-rega.0 (24712) request state values 2022-10-25 06:46:01.018 - info: hm-rega.0 (24712) Updated all datapoints 2022-10-25 06:46:01.023 - info: hm-rega.0 (24712) got 26 variables 2022-10-25 06:46:01.144 - info: hm-rega.0 (24712) added/updated 26 variables 2022-10-25 06:46:01.144 - info: hm-rega.0 (24712) deleted 0 variables 2022-10-25 06:46:01.148 - info: hm-rega.0 (24712) got 10 programs 2022-10-25 06:46:01.262 - info: hm-rega.0 (24712) added/updated 10 programs 2022-10-25 06:46:01.263 - info: hm-rega.0 (24712) deleted 0 programs 2022-10-25 06:46:01.289 - info: hm-rega.0 (24712) update rooms to enum.rooms 2022-10-25 06:46:01.328 - info: hm-rega.0 (24712) update functions to enum.functions 2022-10-25 06:46:01.353 - info: hm-rega.0 (24712) update favorites to enum.favorites 2022-10-25 07:16:12.971 - info: admin.0 (15524) <== Disconnect system.user.admin from ::1 2022-10-25 07:16:18.581 - info: admin.0 (15524) ==> Connected system.user.admin from ::1 2022-10-25 07:17:49.760 - info: admin.0 (15524) <== Disconnect system.user.admin from ::1 2022-10-25 07:17:52.902 - info: admin.0 (15524) ==> Connected system.user.admin from ::1 2022-10-25 07:18:43.675 - info: admin.0 (15524) <== Disconnect system.user.admin from ::1 2022-10-25 07:18:48.617 - info: host.TreloSpin "system.adapter.hm-rpc.1" enabled 2022-10-25 07:18:48.649 - info: host.TreloSpin instance system.adapter.hm-rpc.1 started with pid 16120 2022-10-25 07:18:49.243 - debug: hm-rpc.1 (16120) Redis Objects: Use Redis connection: 127.0.0.1:9001 2022-10-25 07:18:49.265 - debug: hm-rpc.1 (16120) Objects client ready ... initialize now 2022-10-25 07:18:49.268 - debug: hm-rpc.1 (16120) Objects create System PubSub Client 2022-10-25 07:18:49.270 - debug: hm-rpc.1 (16120) Objects create User PubSub Client 2022-10-25 07:18:49.290 - debug: hm-rpc.1 (16120) Objects client initialize lua scripts 2022-10-25 07:18:49.294 - debug: hm-rpc.1 (16120) Objects connected to redis: 127.0.0.1:9001 2022-10-25 07:18:49.302 - debug: hm-rpc.1 (16120) Redis States: Use Redis connection: 127.0.0.1:9000 2022-10-25 07:18:49.306 - debug: hm-rpc.1 (16120) States create System PubSub Client 2022-10-25 07:18:49.306 - debug: hm-rpc.1 (16120) States create User PubSub Client 2022-10-25 07:18:49.311 - debug: hm-rpc.1 (16120) States connected to redis: 127.0.0.1:9000 2022-10-25 07:18:49.327 - debug: hm-rpc.1 (16120) Plugin sentry Initialize Plugin (enabled=true) 2022-10-25 07:18:49.471 - info: hm-rpc.1 (16120) starting. Version 1.15.12 in C:/ioBroker/node_modules/iobroker.hm-rpc, node: v16.15.1, js-controller: 4.0.23 2022-10-25 07:18:49.524 - info: hm-rpc.1 (16120) xmlrpc server is trying to listen on 192.168.178.20:42010 2022-10-25 07:18:49.525 - info: hm-rpc.1 (16120) xmlrpc client is trying to connect to 192.168.178.28:42010/ with ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:a416e9a3bb44b0acd6ea64e4316b7200"] 2022-10-25 07:18:49.525 - debug: hm-rpc.1 (16120) Connect... 2022-10-25 07:18:49.525 - debug: hm-rpc.1 (16120) start connecting interval 2022-10-25 07:19:00.942 - info: admin.0 (15524) ==> Connected system.user.admin from ::1 2022-10-25 07:19:19.528 - debug: hm-rpc.1 (16120) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:a416e9a3bb44b0acd6ea64e4316b7200"] 2022-10-25 07:19:19.627 - info: hm-rpc.1 (16120) Connected 2022-10-25 07:19:19.627 - debug: hm-rpc.1 (16120) clear connecting interval 2022-10-25 07:19:19.628 - debug: hm-rpc.1 (16120) start ping interval 2022-10-25 07:20:49.638 - debug: hm-rpc.1 (16120) [KEEPALIVE] Check if connection is alive 2022-10-25 07:20:49.639 - debug: hm-rpc.1 (16120) Send PING... 2022-10-25 07:20:49.663 - debug: hm-rpc.1 (16120) PING ok 2022-10-25 07:20:54.146 - info: admin.0 (15524) <== Disconnect system.user.admin from ::1 2022-10-25 07:20:57.338 - info: host.TreloSpin stopInstance system.adapter.hm-rega.0 (force=false, process=true) 2022-10-25 07:20:57.342 - info: host.TreloSpin stopInstance system.adapter.hm-rega.0 send kill signal 2022-10-25 07:20:57.342 - info: hm-rega.0 (24712) Got terminate signal TERMINATE_YOURSELF 2022-10-25 07:20:57.350 - info: hm-rega.0 (24712) terminating 2022-10-25 07:20:57.351 - info: hm-rega.0 (24712) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2022-10-25 07:20:57.912 - info: host.TreloSpin instance system.adapter.hm-rega.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2022-10-25 07:21:00.356 - info: host.TreloSpin instance system.adapter.hm-rega.0 started with pid 1720 2022-10-25 07:21:01.385 - info: host.TreloSpin stopInstance system.adapter.hm-rpc.1 (force=false, process=true) 2022-10-25 07:21:01.389 - info: hm-rpc.1 (16120) Got terminate signal TERMINATE_YOURSELF 2022-10-25 07:21:01.390 - info: host.TreloSpin stopInstance system.adapter.hm-rpc.1 send kill signal 2022-10-25 07:21:01.390 - info: hm-rpc.1 (16120) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010",""] 2022-10-25 07:21:01.408 - info: hm-rega.0 (1720) starting. Version 3.0.40 in C:/ioBroker/node_modules/iobroker.hm-rega, node: v16.15.1, js-controller: 4.0.23 2022-10-25 07:21:01.451 - info: hm-rpc.1 (16120) Disconnected 2022-10-25 07:21:01.452 - info: hm-rpc.1 (16120) terminating 2022-10-25 07:21:01.452 - debug: hm-rpc.1 (16120) Plugin sentry destroyed 2022-10-25 07:21:01.452 - info: hm-rpc.1 (16120) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2022-10-25 07:21:01.474 - info: hm-rega.0 (1720) subscribe hm-rpc.0.BidCoS-RF.50.PRESS_SHORT 2022-10-25 07:21:01.658 - info: hm-rega.0 (1720) ReGaHSS 192.168.178.28 up 2022-10-25 07:21:01.778 - info: hm-rega.0 (1720) time difference local-ccu 1s 2022-10-25 07:21:01.973 - info: host.TreloSpin instance system.adapter.hm-rpc.1 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2022-10-25 07:21:02.073 - info: hm-rega.0 (1720) request state values 2022-10-25 07:21:02.172 - info: hm-rega.0 (1720) Updated all datapoints 2022-10-25 07:21:02.177 - info: hm-rega.0 (1720) got 26 variables 2022-10-25 07:21:02.318 - info: hm-rega.0 (1720) added/updated 26 variables 2022-10-25 07:21:02.318 - info: hm-rega.0 (1720) deleted 0 variables 2022-10-25 07:21:02.322 - info: hm-rega.0 (1720) got 10 programs 2022-10-25 07:21:02.416 - info: hm-rega.0 (1720) added/updated 10 programs 2022-10-25 07:21:02.416 - info: hm-rega.0 (1720) deleted 0 programs 2022-10-25 07:21:02.440 - info: hm-rega.0 (1720) update rooms to enum.rooms 2022-10-25 07:21:02.489 - info: hm-rega.0 (1720) update functions to enum.functions 2022-10-25 07:21:02.525 - info: hm-rega.0 (1720) update favorites to enum.favorites 2022-10-25 07:21:04.911 - info: host.TreloSpin instance system.adapter.hm-rpc.1 started with pid 8524 2022-10-25 07:21:05.494 - debug: hm-rpc.1 (8524) Redis Objects: Use Redis connection: 127.0.0.1:9001 2022-10-25 07:21:05.506 - debug: hm-rpc.1 (8524) Objects client ready ... initialize now 2022-10-25 07:21:05.507 - debug: hm-rpc.1 (8524) Objects create System PubSub Client 2022-10-25 07:21:05.507 - debug: hm-rpc.1 (8524) Objects create User PubSub Client 2022-10-25 07:21:05.518 - debug: hm-rpc.1 (8524) Objects client initialize lua scripts 2022-10-25 07:21:05.521 - debug: hm-rpc.1 (8524) Objects connected to redis: 127.0.0.1:9001 2022-10-25 07:21:05.529 - debug: hm-rpc.1 (8524) Redis States: Use Redis connection: 127.0.0.1:9000 2022-10-25 07:21:05.532 - debug: hm-rpc.1 (8524) States create System PubSub Client 2022-10-25 07:21:05.532 - debug: hm-rpc.1 (8524) States create User PubSub Client 2022-10-25 07:21:05.537 - debug: hm-rpc.1 (8524) States connected to redis: 127.0.0.1:9000 2022-10-25 07:21:05.553 - debug: hm-rpc.1 (8524) Plugin sentry Initialize Plugin (enabled=true) 2022-10-25 07:21:05.690 - info: hm-rpc.1 (8524) starting. Version 1.15.12 in C:/ioBroker/node_modules/iobroker.hm-rpc, node: v16.15.1, js-controller: 4.0.23 2022-10-25 07:21:05.750 - info: hm-rpc.1 (8524) xmlrpc server is trying to listen on 192.168.178.20:42010 2022-10-25 07:21:05.750 - info: hm-rpc.1 (8524) xmlrpc client is trying to connect to 192.168.178.28:42010/ with ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 07:21:05.751 - debug: hm-rpc.1 (8524) Connect... 2022-10-25 07:21:05.752 - debug: hm-rpc.1 (8524) start connecting interval 2022-10-25 07:21:35.762 - debug: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 07:21:35.848 - info: hm-rpc.1 (8524) Connected 2022-10-25 07:21:35.848 - debug: hm-rpc.1 (8524) clear connecting interval 2022-10-25 07:21:35.848 - debug: hm-rpc.1 (8524) start ping interval 2022-10-25 07:23:05.856 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:23:05.857 - debug: hm-rpc.1 (8524) Send PING... 2022-10-25 07:23:05.882 - debug: hm-rpc.1 (8524) PING ok 2022-10-25 07:24:35.869 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:24:35.869 - debug: hm-rpc.1 (8524) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 07:24:35.870 - debug: hm-rpc.1 (8524) Connect... 2022-10-25 07:24:35.870 - debug: hm-rpc.1 (8524) clear ping interval 2022-10-25 07:24:35.870 - debug: hm-rpc.1 (8524) start connecting interval 2022-10-25 07:25:05.871 - debug: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 07:25:05.904 - debug: hm-rpc.1 (8524) clear connecting interval 2022-10-25 07:25:05.905 - debug: hm-rpc.1 (8524) start ping interval 2022-10-25 07:26:35.908 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:26:35.909 - debug: hm-rpc.1 (8524) Send PING... 2022-10-25 07:26:35.969 - debug: hm-rpc.1 (8524) PING ok 2022-10-25 07:28:05.918 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:28:05.918 - debug: hm-rpc.1 (8524) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 07:28:05.918 - debug: hm-rpc.1 (8524) Connect... 2022-10-25 07:28:05.918 - debug: hm-rpc.1 (8524) clear ping interval 2022-10-25 07:28:05.918 - debug: hm-rpc.1 (8524) start connecting interval 2022-10-25 07:28:35.929 - debug: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 07:28:35.972 - debug: hm-rpc.1 (8524) clear connecting interval 2022-10-25 07:28:35.972 - debug: hm-rpc.1 (8524) start ping interval 2022-10-25 07:30:05.977 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:30:05.978 - debug: hm-rpc.1 (8524) Send PING... 2022-10-25 07:30:06.002 - debug: hm-rpc.1 (8524) PING ok 2022-10-25 07:31:35.981 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:31:35.981 - debug: hm-rpc.1 (8524) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 07:31:35.981 - debug: hm-rpc.1 (8524) Connect... 2022-10-25 07:31:35.981 - debug: hm-rpc.1 (8524) clear ping interval 2022-10-25 07:31:35.982 - debug: hm-rpc.1 (8524) start connecting interval 2022-10-25 07:32:05.991 - debug: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 07:32:06.058 - debug: hm-rpc.1 (8524) clear connecting interval 2022-10-25 07:32:06.058 - debug: hm-rpc.1 (8524) start ping interval 2022-10-25 07:33:36.065 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:33:36.065 - debug: hm-rpc.1 (8524) Send PING... 2022-10-25 07:33:36.088 - debug: hm-rpc.1 (8524) PING ok 2022-10-25 07:35:06.068 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:35:06.068 - debug: hm-rpc.1 (8524) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 07:35:06.068 - debug: hm-rpc.1 (8524) Connect... 2022-10-25 07:35:06.068 - debug: hm-rpc.1 (8524) clear ping interval 2022-10-25 07:35:06.069 - debug: hm-rpc.1 (8524) start connecting interval 2022-10-25 07:35:36.075 - debug: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 07:35:36.109 - debug: hm-rpc.1 (8524) clear connecting interval 2022-10-25 07:35:36.109 - debug: hm-rpc.1 (8524) start ping interval 2022-10-25 07:37:06.110 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:37:06.111 - debug: hm-rpc.1 (8524) Send PING... 2022-10-25 07:37:06.137 - debug: hm-rpc.1 (8524) PING ok 2022-10-25 07:38:36.110 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:38:36.111 - debug: hm-rpc.1 (8524) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 07:38:36.111 - debug: hm-rpc.1 (8524) Connect... 2022-10-25 07:38:36.111 - debug: hm-rpc.1 (8524) clear ping interval 2022-10-25 07:38:36.111 - debug: hm-rpc.1 (8524) start connecting interval 2022-10-25 07:39:06.122 - debug: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 07:39:06.192 - debug: hm-rpc.1 (8524) clear connecting interval 2022-10-25 07:39:06.193 - debug: hm-rpc.1 (8524) start ping interval 2022-10-25 07:40:36.208 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:40:36.209 - debug: hm-rpc.1 (8524) Send PING... 2022-10-25 07:40:36.239 - debug: hm-rpc.1 (8524) PING ok 2022-10-25 07:42:06.220 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:42:06.220 - debug: hm-rpc.1 (8524) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 07:42:06.221 - debug: hm-rpc.1 (8524) Connect... 2022-10-25 07:42:06.221 - debug: hm-rpc.1 (8524) clear ping interval 2022-10-25 07:42:06.221 - debug: hm-rpc.1 (8524) start connecting interval 2022-10-25 07:42:36.228 - debug: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 07:42:36.263 - debug: hm-rpc.1 (8524) clear connecting interval 2022-10-25 07:42:36.263 - debug: hm-rpc.1 (8524) start ping interval 2022-10-25 07:44:06.269 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:44:06.270 - debug: hm-rpc.1 (8524) Send PING... 2022-10-25 07:44:06.298 - debug: hm-rpc.1 (8524) PING ok 2022-10-25 07:45:36.277 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:45:36.278 - debug: hm-rpc.1 (8524) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 07:45:36.279 - debug: hm-rpc.1 (8524) Connect... 2022-10-25 07:45:36.279 - debug: hm-rpc.1 (8524) clear ping interval 2022-10-25 07:45:36.279 - debug: hm-rpc.1 (8524) start connecting interval 2022-10-25 07:46:06.291 - debug: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 07:46:06.353 - debug: hm-rpc.1 (8524) clear connecting interval 2022-10-25 07:46:06.353 - debug: hm-rpc.1 (8524) start ping interval 2022-10-25 07:47:36.361 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:47:36.362 - debug: hm-rpc.1 (8524) Send PING... 2022-10-25 07:47:36.389 - debug: hm-rpc.1 (8524) PING ok 2022-10-25 07:49:06.363 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:49:06.364 - debug: hm-rpc.1 (8524) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 07:49:06.364 - debug: hm-rpc.1 (8524) Connect... 2022-10-25 07:49:06.364 - debug: hm-rpc.1 (8524) clear ping interval 2022-10-25 07:49:06.364 - debug: hm-rpc.1 (8524) start connecting interval 2022-10-25 07:49:36.365 - debug: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 07:49:36.396 - debug: hm-rpc.1 (8524) clear connecting interval 2022-10-25 07:49:36.396 - debug: hm-rpc.1 (8524) start ping interval 2022-10-25 07:51:06.412 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:51:06.412 - debug: hm-rpc.1 (8524) Send PING... 2022-10-25 07:51:06.439 - debug: hm-rpc.1 (8524) PING ok 2022-10-25 07:52:36.421 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:52:36.421 - debug: hm-rpc.1 (8524) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 07:52:36.421 - debug: hm-rpc.1 (8524) Connect... 2022-10-25 07:52:36.422 - debug: hm-rpc.1 (8524) clear ping interval 2022-10-25 07:52:36.422 - debug: hm-rpc.1 (8524) start connecting interval 2022-10-25 07:53:06.426 - debug: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 07:53:06.495 - debug: hm-rpc.1 (8524) clear connecting interval 2022-10-25 07:53:06.495 - debug: hm-rpc.1 (8524) start ping interval 2022-10-25 07:53:21.560 - info: host.TreloSpin "system.adapter.hm-rpc.3" enabled 2022-10-25 07:53:21.592 - info: host.TreloSpin instance system.adapter.hm-rpc.3 started with pid 22824 2022-10-25 07:53:22.600 - info: hm-rpc.3 (22824) starting. Version 1.15.12 in C:/ioBroker/node_modules/iobroker.hm-rpc, node: v16.15.1, js-controller: 4.0.23 2022-10-25 07:53:22.645 - info: hm-rpc.3 (22824) xmlrpc server is trying to listen on 192.168.178.20:49292 2022-10-25 07:53:22.645 - info: hm-rpc.3 (22824) xmlrpc client is trying to connect to 192.168.178.28:49292/groups/ with ["http://192.168.178.20:49292","TreloSpin:hm-rpc.3:340ee635a7b25f7c91e3dad4fe2300e2"] 2022-10-25 07:54:02.743 - info: hm-rpc.3 (22824) Connected 2022-10-25 07:54:36.510 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:54:36.511 - debug: hm-rpc.1 (8524) Send PING... 2022-10-25 07:54:36.541 - debug: hm-rpc.1 (8524) PING ok 2022-10-25 07:56:06.520 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:56:06.520 - debug: hm-rpc.1 (8524) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 07:56:06.520 - debug: hm-rpc.1 (8524) Connect... 2022-10-25 07:56:06.521 - debug: hm-rpc.1 (8524) clear ping interval 2022-10-25 07:56:06.521 - debug: hm-rpc.1 (8524) start connecting interval 2022-10-25 07:56:36.522 - debug: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 07:56:36.551 - debug: hm-rpc.1 (8524) clear connecting interval 2022-10-25 07:56:36.551 - debug: hm-rpc.1 (8524) start ping interval 2022-10-25 07:58:06.565 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:58:06.565 - debug: hm-rpc.1 (8524) Send PING... 2022-10-25 07:58:06.590 - debug: hm-rpc.1 (8524) PING ok 2022-10-25 07:59:36.577 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 07:59:36.577 - debug: hm-rpc.1 (8524) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 07:59:36.577 - debug: hm-rpc.1 (8524) Connect... 2022-10-25 07:59:36.577 - debug: hm-rpc.1 (8524) clear ping interval 2022-10-25 07:59:36.577 - debug: hm-rpc.1 (8524) start connecting interval 2022-10-25 08:00:06.583 - debug: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:7c105434978f5b04dd09dd23af81e785"] 2022-10-25 08:00:06.669 - debug: hm-rpc.1 (8524) clear connecting interval 2022-10-25 08:00:06.670 - debug: hm-rpc.1 (8524) start ping interval 2022-10-25 08:01:36.682 - debug: hm-rpc.1 (8524) [KEEPALIVE] Check if connection is alive 2022-10-25 08:01:36.682 - debug: hm-rpc.1 (8524) Send PING... 2022-10-25 08:01:36.709 - debug: hm-rpc.1 (8524) PING ok 2022-10-25 08:02:48.872 - info: host.TreloSpin "system.adapter.hm-rega.0" disabled 2022-10-25 08:02:48.872 - info: hm-rega.0 (1720) Adapter is disabled => stop 2022-10-25 08:02:48.873 - info: host.TreloSpin stopInstance system.adapter.hm-rega.0 (force=false, process=true) 2022-10-25 08:02:48.875 - info: hm-rega.0 (1720) Got terminate signal TERMINATE_YOURSELF 2022-10-25 08:02:48.875 - info: host.TreloSpin stopInstance system.adapter.hm-rega.0 send kill signal 2022-10-25 08:02:48.896 - info: hm-rega.0 (1720) terminating 2022-10-25 08:02:48.897 - info: hm-rega.0 (1720) Terminated (NO_ERROR): Without reason 2022-10-25 08:02:49.446 - info: host.TreloSpin instance system.adapter.hm-rega.0 terminated with code 0 (NO_ERROR) 2022-10-25 08:02:49.740 - info: host.TreloSpin "system.adapter.hm-rpc.1" disabled 2022-10-25 08:02:49.741 - info: host.TreloSpin stopInstance system.adapter.hm-rpc.1 (force=false, process=true) 2022-10-25 08:02:49.744 - info: hm-rpc.1 (8524) Got terminate signal TERMINATE_YOURSELF 2022-10-25 08:02:49.745 - info: host.TreloSpin stopInstance system.adapter.hm-rpc.1 send kill signal 2022-10-25 08:02:49.746 - info: hm-rpc.1 (8524) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010",""] 2022-10-25 08:02:49.779 - info: hm-rpc.1 (8524) Disconnected 2022-10-25 08:02:49.780 - info: hm-rpc.1 (8524) terminating 2022-10-25 08:02:49.780 - debug: hm-rpc.1 (8524) Plugin sentry destroyed 2022-10-25 08:02:49.782 - info: hm-rpc.1 (8524) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2022-10-25 08:02:50.327 - info: host.TreloSpin instance system.adapter.hm-rpc.1 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2022-10-25 08:02:51.223 - info: host.TreloSpin "system.adapter.hm-rpc.3" disabled 2022-10-25 08:02:51.223 - info: host.TreloSpin stopInstance system.adapter.hm-rpc.3 (force=false, process=true) 2022-10-25 08:02:51.225 - info: host.TreloSpin stopInstance system.adapter.hm-rpc.3 send kill signal 2022-10-25 08:02:51.225 - info: hm-rpc.3 (22824) Got terminate signal TERMINATE_YOURSELF 2022-10-25 08:02:51.226 - info: hm-rpc.3 (22824) xmlrpc -> 192.168.178.28:49292/groups/ init ["http://192.168.178.20:49292",""] 2022-10-25 08:02:51.250 - info: hm-rpc.3 (22824) Disconnected 2022-10-25 08:02:51.251 - info: hm-rpc.3 (22824) terminating 2022-10-25 08:02:51.251 - info: hm-rpc.3 (22824) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2022-10-25 08:02:51.785 - info: host.TreloSpin instance system.adapter.hm-rpc.3 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2022-10-25 08:03:32.882 - info: host.TreloSpin "system.adapter.hm-rega.0" enabled 2022-10-25 08:03:32.924 - info: host.TreloSpin instance system.adapter.hm-rega.0 started with pid 9664 2022-10-25 08:03:34.181 - info: hm-rega.0 (9664) starting. Version 3.0.40 in C:/ioBroker/node_modules/iobroker.hm-rega, node: v16.15.1, js-controller: 4.0.23 2022-10-25 08:03:34.261 - info: hm-rega.0 (9664) subscribe hm-rpc.0.BidCoS-RF.50.PRESS_SHORT 2022-10-25 08:03:34.422 - info: hm-rega.0 (9664) ReGaHSS 192.168.178.28 up 2022-10-25 08:03:34.516 - info: hm-rega.0 (9664) time difference local-ccu 1s 2022-10-25 08:03:34.797 - info: hm-rega.0 (9664) request state values 2022-10-25 08:03:34.877 - info: hm-rega.0 (9664) Updated all datapoints 2022-10-25 08:03:34.883 - info: hm-rega.0 (9664) got 26 variables 2022-10-25 08:03:35.037 - info: hm-rega.0 (9664) added/updated 26 variables 2022-10-25 08:03:35.037 - info: hm-rega.0 (9664) deleted 0 variables 2022-10-25 08:03:35.040 - info: hm-rega.0 (9664) got 10 programs 2022-10-25 08:03:35.144 - info: hm-rega.0 (9664) added/updated 10 programs 2022-10-25 08:03:35.144 - info: hm-rega.0 (9664) deleted 0 programs 2022-10-25 08:03:35.168 - info: hm-rega.0 (9664) update rooms to enum.rooms 2022-10-25 08:03:35.211 - info: hm-rega.0 (9664) update functions to enum.functions 2022-10-25 08:03:35.247 - info: hm-rega.0 (9664) update favorites to enum.favorites 2022-10-25 08:03:37.806 - info: host.TreloSpin "system.adapter.hm-rpc.1" enabled 2022-10-25 08:03:37.836 - info: host.TreloSpin instance system.adapter.hm-rpc.1 started with pid 15208 2022-10-25 08:03:38.418 - debug: hm-rpc.1 (15208) Redis Objects: Use Redis connection: 127.0.0.1:9001 2022-10-25 08:03:38.449 - debug: hm-rpc.1 (15208) Objects client ready ... initialize now 2022-10-25 08:03:38.450 - debug: hm-rpc.1 (15208) Objects create System PubSub Client 2022-10-25 08:03:38.450 - debug: hm-rpc.1 (15208) Objects create User PubSub Client 2022-10-25 08:03:38.463 - debug: hm-rpc.1 (15208) Objects client initialize lua scripts 2022-10-25 08:03:38.466 - debug: hm-rpc.1 (15208) Objects connected to redis: 127.0.0.1:9001 2022-10-25 08:03:38.475 - debug: hm-rpc.1 (15208) Redis States: Use Redis connection: 127.0.0.1:9000 2022-10-25 08:03:38.478 - debug: hm-rpc.1 (15208) States create System PubSub Client 2022-10-25 08:03:38.479 - debug: hm-rpc.1 (15208) States create User PubSub Client 2022-10-25 08:03:38.491 - debug: hm-rpc.1 (15208) States connected to redis: 127.0.0.1:9000 2022-10-25 08:03:38.513 - debug: hm-rpc.1 (15208) Plugin sentry Initialize Plugin (enabled=true) 2022-10-25 08:03:38.650 - info: hm-rpc.1 (15208) starting. Version 1.15.12 in C:/ioBroker/node_modules/iobroker.hm-rpc, node: v16.15.1, js-controller: 4.0.23 2022-10-25 08:03:38.698 - info: hm-rpc.1 (15208) xmlrpc server is trying to listen on 192.168.178.20:42010 2022-10-25 08:03:38.698 - info: hm-rpc.1 (15208) xmlrpc client is trying to connect to 192.168.178.28:42010/ with ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:43d330f91309bcde2df0f28e027f4e9e"] 2022-10-25 08:03:38.699 - debug: hm-rpc.1 (15208) Connect... 2022-10-25 08:03:38.700 - debug: hm-rpc.1 (15208) start connecting interval 2022-10-25 08:03:41.338 - info: host.TreloSpin "system.adapter.hm-rpc.3" enabled 2022-10-25 08:03:41.361 - info: host.TreloSpin instance system.adapter.hm-rpc.3 started with pid 10176 2022-10-25 08:03:42.363 - info: hm-rpc.3 (10176) starting. Version 1.15.12 in C:/ioBroker/node_modules/iobroker.hm-rpc, node: v16.15.1, js-controller: 4.0.23 2022-10-25 08:03:42.417 - info: hm-rpc.3 (10176) xmlrpc server is trying to listen on 192.168.178.20:49292 2022-10-25 08:03:42.417 - info: hm-rpc.3 (10176) xmlrpc client is trying to connect to 192.168.178.28:49292/groups/ with ["http://192.168.178.20:49292","TreloSpin:hm-rpc.3:2dfba3efd9db8d2414a37a79d9d78f54"] 2022-10-25 08:04:08.704 - debug: hm-rpc.1 (15208) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:43d330f91309bcde2df0f28e027f4e9e"] 2022-10-25 08:04:08.787 - info: hm-rpc.1 (15208) Connected 2022-10-25 08:04:08.788 - debug: hm-rpc.1 (15208) clear connecting interval 2022-10-25 08:04:08.788 - debug: hm-rpc.1 (15208) start ping interval 2022-10-25 08:04:22.536 - info: hm-rpc.3 (10176) Connected 2022-10-25 08:05:10.263 - info: host.TreloSpin "system.adapter.hm-rpc.0" enabled 2022-10-25 08:05:10.319 - info: host.TreloSpin instance system.adapter.hm-rpc.0 started with pid 9448 2022-10-25 08:05:11.221 - debug: hm-rpc.0 (9448) Redis Objects: Use Redis connection: 127.0.0.1:9001 2022-10-25 08:05:11.238 - debug: hm-rpc.0 (9448) Objects client ready ... initialize now 2022-10-25 08:05:11.239 - debug: hm-rpc.0 (9448) Objects create System PubSub Client 2022-10-25 08:05:11.240 - debug: hm-rpc.0 (9448) Objects create User PubSub Client 2022-10-25 08:05:11.253 - debug: hm-rpc.0 (9448) Objects client initialize lua scripts 2022-10-25 08:05:11.257 - debug: hm-rpc.0 (9448) Objects connected to redis: 127.0.0.1:9001 2022-10-25 08:05:11.268 - debug: hm-rpc.0 (9448) Redis States: Use Redis connection: 127.0.0.1:9000 2022-10-25 08:05:11.272 - debug: hm-rpc.0 (9448) States create System PubSub Client 2022-10-25 08:05:11.272 - debug: hm-rpc.0 (9448) States create User PubSub Client 2022-10-25 08:05:11.277 - debug: hm-rpc.0 (9448) States connected to redis: 127.0.0.1:9000 2022-10-25 08:05:11.307 - debug: hm-rpc.0 (9448) Plugin sentry Initialize Plugin (enabled=true) 2022-10-25 08:05:11.495 - info: hm-rpc.0 (9448) starting. Version 1.15.12 in C:/ioBroker/node_modules/iobroker.hm-rpc, node: v16.15.1, js-controller: 4.0.23 2022-10-25 08:05:11.550 - info: hm-rpc.0 (9448) xmlrpc server is trying to listen on 192.168.178.20:42001 2022-10-25 08:05:11.551 - info: hm-rpc.0 (9448) xmlrpc client is trying to connect to 192.168.178.28:42001/ with ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:1e401c9a41474a475d5f92b9cb81305b"] 2022-10-25 08:05:11.551 - debug: hm-rpc.0 (9448) Connect... 2022-10-25 08:05:11.552 - debug: hm-rpc.0 (9448) start connecting interval 2022-10-25 08:05:38.803 - debug: hm-rpc.1 (15208) [KEEPALIVE] Check if connection is alive 2022-10-25 08:05:38.803 - debug: hm-rpc.1 (15208) Send PING... 2022-10-25 08:05:38.831 - debug: hm-rpc.1 (15208) PING ok 2022-10-25 08:06:06.554 - debug: hm-rpc.0 (9448) xmlrpc -> 192.168.178.28:42001/ init ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:1e401c9a41474a475d5f92b9cb81305b"] 2022-10-25 08:07:01.565 - debug: hm-rpc.0 (9448) xmlrpc -> 192.168.178.28:42001/ init ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:1e401c9a41474a475d5f92b9cb81305b"] 2022-10-25 08:07:08.803 - debug: hm-rpc.1 (15208) [KEEPALIVE] Check if connection is alive 2022-10-25 08:07:08.803 - debug: hm-rpc.1 (15208) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 08:07:08.803 - debug: hm-rpc.1 (15208) Connect... 2022-10-25 08:07:08.803 - debug: hm-rpc.1 (15208) clear ping interval 2022-10-25 08:07:08.804 - debug: hm-rpc.1 (15208) start connecting interval 2022-10-25 08:07:38.807 - debug: hm-rpc.1 (15208) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:43d330f91309bcde2df0f28e027f4e9e"] 2022-10-25 08:07:38.833 - debug: hm-rpc.1 (15208) clear connecting interval 2022-10-25 08:07:38.833 - debug: hm-rpc.1 (15208) start ping interval 2022-10-25 08:07:56.569 - debug: hm-rpc.0 (9448) xmlrpc -> 192.168.178.28:42001/ init ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:1e401c9a41474a475d5f92b9cb81305b"] 2022-10-25 08:08:51.577 - debug: hm-rpc.0 (9448) xmlrpc -> 192.168.178.28:42001/ init ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:1e401c9a41474a475d5f92b9cb81305b"] 2022-10-25 08:09:08.837 - debug: hm-rpc.1 (15208) [KEEPALIVE] Check if connection is alive 2022-10-25 08:09:08.838 - debug: hm-rpc.1 (15208) Send PING... 2022-10-25 08:09:08.895 - debug: hm-rpc.1 (15208) PING ok 2022-10-25 08:09:46.579 - debug: hm-rpc.0 (9448) xmlrpc -> 192.168.178.28:42001/ init ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:1e401c9a41474a475d5f92b9cb81305b"] 2022-10-25 08:10:38.847 - debug: hm-rpc.1 (15208) [KEEPALIVE] Check if connection is alive 2022-10-25 08:10:38.847 - debug: hm-rpc.1 (15208) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 08:10:38.847 - debug: hm-rpc.1 (15208) Connect... 2022-10-25 08:10:38.847 - debug: hm-rpc.1 (15208) clear ping interval 2022-10-25 08:10:38.847 - debug: hm-rpc.1 (15208) start connecting interval 2022-10-25 08:10:41.592 - debug: hm-rpc.0 (9448) xmlrpc -> 192.168.178.28:42001/ init ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:1e401c9a41474a475d5f92b9cb81305b"] 2022-10-25 08:10:56.202 - error: hm-rega.0 (9664) post request error: connect ETIMEDOUT 192.168.178.28:48181 2022-10-25 08:10:56.203 - error: hm-rega.0 (9664) CCU 192.168.178.28 unreachable 2022-10-25 08:10:57.730 - error: hm-rpc.0 (9448) Init not possible, going to stop: Unknown XML-RPC tag 'TITLE' 2022-10-25 08:11:08.852 - debug: hm-rpc.1 (15208) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:43d330f91309bcde2df0f28e027f4e9e"] 2022-10-25 08:11:09.962 - error: hm-rpc.1 (15208) Init not possible, going to stop: Unknown XML-RPC tag 'TITLE' 2022-10-25 08:11:27.734 - info: hm-rpc.0 (9448) xmlrpc -> 192.168.178.28:42001/ init ["http://192.168.178.20:42001",""] 2022-10-25 08:11:28.741 - info: hm-rpc.0 (9448) terminating 2022-10-25 08:11:28.742 - debug: hm-rpc.0 (9448) Plugin sentry destroyed 2022-10-25 08:11:28.742 - info: hm-rpc.0 (9448) Terminated (NO_ERROR): Without reason 2022-10-25 08:11:28.761 - error: hm-rpc.0 (9448) Cannot call init: [http://192.168.178.20:42001, ""] Unknown XML-RPC tag 'TITLE' 2022-10-25 08:11:29.297 - info: host.TreloSpin instance system.adapter.hm-rpc.0 terminated with code 0 (NO_ERROR) 2022-10-25 08:11:29.297 - info: host.TreloSpin Restart adapter system.adapter.hm-rpc.0 because enabled 2022-10-25 08:11:38.865 - debug: hm-rpc.1 (15208) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:43d330f91309bcde2df0f28e027f4e9e"] 2022-10-25 08:11:38.902 - debug: hm-rpc.1 (15208) clear connecting interval 2022-10-25 08:11:38.903 - debug: hm-rpc.1 (15208) start ping interval 2022-10-25 08:11:39.972 - info: hm-rpc.1 (15208) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010",""] 2022-10-25 08:11:40.018 - info: hm-rpc.1 (15208) Disconnected 2022-10-25 08:11:40.020 - info: hm-rpc.1 (15208) terminating 2022-10-25 08:11:40.020 - debug: hm-rpc.1 (15208) Plugin sentry destroyed 2022-10-25 08:11:40.021 - info: hm-rpc.1 (15208) Terminated (NO_ERROR): Without reason 2022-10-25 08:11:40.580 - info: host.TreloSpin instance system.adapter.hm-rpc.1 terminated with code 0 (NO_ERROR) 2022-10-25 08:11:40.581 - info: host.TreloSpin Restart adapter system.adapter.hm-rpc.1 because enabled 2022-10-25 08:11:56.269 - info: hm-rega.0 (9664) ReGaHSS 192.168.178.28 up 2022-10-25 08:11:56.318 - info: hm-rega.0 (9664) time difference local-ccu 0s 2022-10-25 08:11:56.548 - info: hm-rega.0 (9664) request state values 2022-10-25 08:11:56.612 - info: hm-rega.0 (9664) Updated all datapoints 2022-10-25 08:11:56.617 - info: hm-rega.0 (9664) got 26 variables 2022-10-25 08:11:56.701 - info: hm-rega.0 (9664) added/updated 26 variables 2022-10-25 08:11:56.701 - info: hm-rega.0 (9664) deleted 0 variables 2022-10-25 08:11:56.708 - info: hm-rega.0 (9664) got 10 programs 2022-10-25 08:11:56.725 - info: hm-rega.0 (9664) added/updated 10 programs 2022-10-25 08:11:56.725 - info: hm-rega.0 (9664) deleted 0 programs 2022-10-25 08:11:56.748 - info: hm-rega.0 (9664) update rooms to enum.rooms 2022-10-25 08:11:56.788 - info: hm-rega.0 (9664) update functions to enum.functions 2022-10-25 08:11:56.811 - info: hm-rega.0 (9664) update favorites to enum.favorites 2022-10-25 08:11:59.323 - info: host.TreloSpin instance system.adapter.hm-rpc.0 started with pid 560 2022-10-25 08:11:59.968 - debug: hm-rpc.0 (560) Redis Objects: Use Redis connection: 127.0.0.1:9001 2022-10-25 08:11:59.991 - debug: hm-rpc.0 (560) Objects client ready ... initialize now 2022-10-25 08:11:59.991 - debug: hm-rpc.0 (560) Objects create System PubSub Client 2022-10-25 08:11:59.992 - debug: hm-rpc.0 (560) Objects create User PubSub Client 2022-10-25 08:12:00.001 - debug: hm-rpc.0 (560) Objects client initialize lua scripts 2022-10-25 08:12:00.005 - debug: hm-rpc.0 (560) Objects connected to redis: 127.0.0.1:9001 2022-10-25 08:12:00.018 - debug: hm-rpc.0 (560) Redis States: Use Redis connection: 127.0.0.1:9000 2022-10-25 08:12:00.024 - debug: hm-rpc.0 (560) States create System PubSub Client 2022-10-25 08:12:00.025 - debug: hm-rpc.0 (560) States create User PubSub Client 2022-10-25 08:12:00.037 - debug: hm-rpc.0 (560) States connected to redis: 127.0.0.1:9000 2022-10-25 08:12:00.057 - debug: hm-rpc.0 (560) Plugin sentry Initialize Plugin (enabled=true) 2022-10-25 08:12:00.229 - info: hm-rpc.0 (560) starting. Version 1.15.12 in C:/ioBroker/node_modules/iobroker.hm-rpc, node: v16.15.1, js-controller: 4.0.23 2022-10-25 08:12:00.302 - info: hm-rpc.0 (560) xmlrpc server is trying to listen on 192.168.178.20:42001 2022-10-25 08:12:00.302 - info: hm-rpc.0 (560) xmlrpc client is trying to connect to 192.168.178.28:42001/ with ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:f626ed1be32375929a8f867958c9c0cf"] 2022-10-25 08:12:00.302 - debug: hm-rpc.0 (560) Connect... 2022-10-25 08:12:00.303 - debug: hm-rpc.0 (560) start connecting interval 2022-10-25 08:12:10.616 - info: host.TreloSpin instance system.adapter.hm-rpc.1 started with pid 6496 2022-10-25 08:12:11.182 - debug: hm-rpc.1 (6496) Redis Objects: Use Redis connection: 127.0.0.1:9001 2022-10-25 08:12:11.212 - debug: hm-rpc.1 (6496) Objects client ready ... initialize now 2022-10-25 08:12:11.213 - debug: hm-rpc.1 (6496) Objects create System PubSub Client 2022-10-25 08:12:11.214 - debug: hm-rpc.1 (6496) Objects create User PubSub Client 2022-10-25 08:12:11.227 - debug: hm-rpc.1 (6496) Objects client initialize lua scripts 2022-10-25 08:12:11.230 - debug: hm-rpc.1 (6496) Objects connected to redis: 127.0.0.1:9001 2022-10-25 08:12:11.239 - debug: hm-rpc.1 (6496) Redis States: Use Redis connection: 127.0.0.1:9000 2022-10-25 08:12:11.243 - debug: hm-rpc.1 (6496) States create System PubSub Client 2022-10-25 08:12:11.243 - debug: hm-rpc.1 (6496) States create User PubSub Client 2022-10-25 08:12:11.249 - debug: hm-rpc.1 (6496) States connected to redis: 127.0.0.1:9000 2022-10-25 08:12:11.266 - debug: hm-rpc.1 (6496) Plugin sentry Initialize Plugin (enabled=true) 2022-10-25 08:12:11.400 - info: hm-rpc.1 (6496) starting. Version 1.15.12 in C:/ioBroker/node_modules/iobroker.hm-rpc, node: v16.15.1, js-controller: 4.0.23 2022-10-25 08:12:11.444 - info: hm-rpc.1 (6496) xmlrpc server is trying to listen on 192.168.178.20:42010 2022-10-25 08:12:11.445 - info: hm-rpc.1 (6496) xmlrpc client is trying to connect to 192.168.178.28:42010/ with ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:f433ef3a75071b6d0ca2c966244ad591"] 2022-10-25 08:12:11.445 - debug: hm-rpc.1 (6496) Connect... 2022-10-25 08:12:11.446 - debug: hm-rpc.1 (6496) start connecting interval 2022-10-25 08:12:41.446 - debug: hm-rpc.1 (6496) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:f433ef3a75071b6d0ca2c966244ad591"] 2022-10-25 08:12:41.533 - info: hm-rpc.1 (6496) Connected 2022-10-25 08:12:41.533 - debug: hm-rpc.1 (6496) clear connecting interval 2022-10-25 08:12:41.533 - debug: hm-rpc.1 (6496) start ping interval 2022-10-25 08:12:55.316 - debug: hm-rpc.0 (560) xmlrpc -> 192.168.178.28:42001/ init ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:f626ed1be32375929a8f867958c9c0cf"] 2022-10-25 08:13:50.322 - debug: hm-rpc.0 (560) xmlrpc -> 192.168.178.28:42001/ init ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:f626ed1be32375929a8f867958c9c0cf"] 2022-10-25 08:14:11.542 - debug: hm-rpc.1 (6496) [KEEPALIVE] Check if connection is alive 2022-10-25 08:14:11.542 - debug: hm-rpc.1 (6496) Send PING... 2022-10-25 08:14:11.565 - debug: hm-rpc.1 (6496) PING ok 2022-10-25 08:14:45.332 - debug: hm-rpc.0 (560) xmlrpc -> 192.168.178.28:42001/ init ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:f626ed1be32375929a8f867958c9c0cf"] 2022-10-25 08:15:40.339 - debug: hm-rpc.0 (560) xmlrpc -> 192.168.178.28:42001/ init ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:f626ed1be32375929a8f867958c9c0cf"] 2022-10-25 08:15:41.545 - debug: hm-rpc.1 (6496) [KEEPALIVE] Check if connection is alive 2022-10-25 08:15:41.546 - debug: hm-rpc.1 (6496) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 08:15:41.546 - debug: hm-rpc.1 (6496) Connect... 2022-10-25 08:15:41.546 - debug: hm-rpc.1 (6496) clear ping interval 2022-10-25 08:15:41.546 - debug: hm-rpc.1 (6496) start connecting interval 2022-10-25 08:16:11.559 - debug: hm-rpc.1 (6496) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:f433ef3a75071b6d0ca2c966244ad591"] 2022-10-25 08:16:11.588 - debug: hm-rpc.1 (6496) clear connecting interval 2022-10-25 08:16:11.588 - debug: hm-rpc.1 (6496) start ping interval 2022-10-25 08:16:35.344 - debug: hm-rpc.0 (560) xmlrpc -> 192.168.178.28:42001/ init ["http://192.168.178.20:42001","TreloSpin:hm-rpc.0:f626ed1be32375929a8f867958c9c0cf"] 2022-10-25 08:17:20.610 - info: hm-rpc.0 (560) Connected 2022-10-25 08:17:20.610 - debug: hm-rpc.0 (560) clear connecting interval 2022-10-25 08:17:20.610 - debug: hm-rpc.0 (560) start ping interval 2022-10-25 08:17:41.589 - debug: hm-rpc.1 (6496) [KEEPALIVE] Check if connection is alive 2022-10-25 08:17:41.590 - debug: hm-rpc.1 (6496) Send PING... 2022-10-25 08:17:41.610 - debug: hm-rpc.1 (6496) PING ok 2022-10-25 08:18:50.619 - debug: hm-rpc.0 (560) [KEEPALIVE] Check if connection is alive 2022-10-25 08:18:50.619 - debug: hm-rpc.0 (560) Send PING... 2022-10-25 08:19:11.595 - debug: hm-rpc.1 (6496) [KEEPALIVE] Check if connection is alive 2022-10-25 08:19:11.596 - debug: hm-rpc.1 (6496) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 08:19:11.596 - debug: hm-rpc.1 (6496) Connect... 2022-10-25 08:19:11.596 - debug: hm-rpc.1 (6496) clear ping interval 2022-10-25 08:19:11.597 - debug: hm-rpc.1 (6496) start connecting interval 2022-10-25 08:19:41.601 - debug: hm-rpc.1 (6496) xmlrpc -> 192.168.178.28:42010/ init ["http://192.168.178.20:42010","TreloSpin:hm-rpc.1:f433ef3a75071b6d0ca2c966244ad591"] 2022-10-25 08:19:41.660 - debug: hm-rpc.1 (6496) clear connecting interval 2022-10-25 08:19:41.660 - debug: hm-rpc.1 (6496) start ping interval 2022-10-25 08:20:20.625 - debug: hm-rpc.0 (560) [KEEPALIVE] Check if connection is alive 2022-10-25 08:20:20.626 - debug: hm-rpc.0 (560) [KEEPALIVE] Connection timed out, initializing new connection 2022-10-25 08:20:20.626 - debug: hm-rpc.0 (560) Connect... 2022-10-25 08:20:20.626 - debug: hm-rpc.0 (560) clear ping interval 2022-10-25 08:20:20.626 - debug: hm-rpc.0 (560) start connecting intervalProtokoll Syslog ccu3: (Ausschnitt)
192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Error ReGaHss "ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {""000A9A49A2DEC6:1"",""WINDOW_STATE""}) [CallGetValue():iseXmlRpc.cpp:1435]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2BD:1"",""PARTY_SET_POINT_TEMPERATURE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: PARTY_SET_POINT_TEMPERATURE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Error ReGaHss "ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2BD:1"",""PARTY_TIME_END""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: PARTY_TIME_END""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Error ReGaHss "ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {""000A9A49A2DEC6:1"",""HUMIDITY""}) [CallGetValue():iseXmlRpc.cpp:1435]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2BD:1"",""PARTY_TIME_START""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: PARTY_TIME_START""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Error ReGaHss "ERROR: CallGetValue failed; sVal = 0 [ReadValue():iseDOMdpHSS.cpp:124]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2BD:1"",""SET_POINT_MODE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: SET_POINT_MODE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Error ReGaHss "ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {""000A9A49A2DEC6:1"",""ACTIVE_PROFILE""}) [CallGetValue():iseXmlRpc.cpp:1435]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2BD:1"",""WINDOW_STATE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: WINDOW_STATE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Error ReGaHss "ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2BD:1"",""HUMIDITY""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: HUMIDITY""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Error ReGaHss "ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {""000A9A49A2DEC6:1"",""ACTUAL_TEMPERATURE""}) [CallGetValue():iseXmlRpc.cpp:1435]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2BD:1"",""ACTIVE_PROFILE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: ACTIVE_PROFILE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Error ReGaHss "ERROR: CallGetValue failed; sVal = 0.000000 [ReadValue():iseDOMdpHSS.cpp:124]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2BD:1"",""ACTUAL_TEMPERATURE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: ACTUAL_TEMPERATURE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Error ReGaHss "ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {""000A9A49A2DEC6:1"",""SET_POINT_TEMPERATURE""}) [CallGetValue():iseXmlRpc.cpp:1435]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2BD:1"",""SET_POINT_TEMPERATURE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: SET_POINT_TEMPERATURE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2DC:1"",""PARTY_MODE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: PARTY_MODE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2DC:1"",""PARTY_SET_POINT_TEMPERATURE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: PARTY_SET_POINT_TEMPERATURE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2DC:1"",""PARTY_TIME_END""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: PARTY_TIME_END""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2DC:1"",""PARTY_TIME_START""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: PARTY_TIME_START""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2DC:1"",""SET_POINT_MODE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: SET_POINT_MODE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2DC:1"",""WINDOW_STATE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: WINDOW_STATE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2DC:1"",""HUMIDITY""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: HUMIDITY""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2DC:1"",""ACTIVE_PROFILE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: ACTIVE_PROFILE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2DC:1"",""ACTUAL_TEMPERATURE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: ACTUAL_TEMPERATURE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9F298FD2DC:1"",""SET_POINT_TEMPERATURE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: SET_POINT_TEMPERATURE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9A49A2DEC6:1"",""PARTY_MODE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: PARTY_MODE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9A49A2DEC6:1"",""PARTY_SET_POINT_TEMPERATURE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: PARTY_SET_POINT_TEMPERATURE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9A49A2DEC6:1"",""PARTY_TIME_END""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: PARTY_TIME_END""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9A49A2DEC6:1"",""PARTY_TIME_START""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: PARTY_TIME_START""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9A49A2DEC6:1"",""SET_POINT_MODE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: SET_POINT_MODE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9A49A2DEC6:1"",""WINDOW_STATE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: WINDOW_STATE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9A49A2DEC6:1"",""HUMIDITY""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: HUMIDITY""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9A49A2DEC6:1"",""ACTIVE_PROFILE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: ACTIVE_PROFILE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9A49A2DEC6:1"",""ACTUAL_TEMPERATURE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: ACTUAL_TEMPERATURE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:36 10/25/22 08:11:36 ccu3-webui local 0 Warning ReGaHss "WARNING: XMLRPC 'getValue': rpcClient.isFault() failed (url: xmlrpc://127.0.0.1:32010, params: {""000A9A49A2DEC6:1"",""SET_POINT_TEMPERATURE""}, result: [faultCode:-5,faultString:""Unknown Parameter value for value key: SET_POINT_TEMPERATURE""]) [CallXmlrpcMethod():iseXmlRpc.cpp:2608]" 192.168.178.28 10/25/22 08:11:16 10/25/22 08:11:15 ccu3-webui user-level Info kernel "[ 47.974887] eq3loop: eq3loop_open_slave() mmd_hmip" 192.168.178.28 10/25/22 08:11:16 10/25/22 08:11:15 ccu3-webui user-level Info kernel "[ 47.966012] eq3loop: eq3loop_close_slave() mmd_hmip" 192.168.178.28 10/25/22 08:11:16 10/25/22 08:11:15 ccu3-webui user-level Info kernel "[ 47.965939] eq3loop: eq3loop_open_slave() mmd_hmip" 192.168.178.28 10/25/22 08:11:16 10/25/22 08:11:15 ccu3-webui user-level Info kernel "[ 47.965305] eq3loop: eq3loop_close_slave() mmd_hmip" 192.168.178.28 10/25/22 08:11:16 10/25/22 08:11:15 ccu3-webui user-level Info kernel "[ 47.965186] eq3loop: eq3loop_open_slave() mmd_hmip" 192.168.178.28 10/25/22 08:11:16 10/25/22 08:11:15 ccu3-webui user-level Info kernel "[ 47.961909] eq3loop: eq3loop_close_slave() mmd_hmip" 192.168.178.28 10/25/22 08:11:16 10/25/22 08:11:15 ccu3-webui user-level Info kernel "[ 47.961768] eq3loop: eq3loop_open_slave() mmd_hmip" 192.168.178.28 10/25/22 08:10:59 10/25/22 08:10:59 ccu3-webui system Info ntpd[484] "receive: Unexpected origin timestamp 0xe701fc73.0833b897 does not match aorg 0000000000.00000000 from server@176.9.42.91 xmt 0xe701fc73.730440d6" 192.168.178.28 10/25/22 08:10:54 10/25/22 08:10:54 ccu3-webui user-level Info kernel "[ 26.827297] eq3loop: eq3loop_open_slave() mmd_bidcos" 192.168.178.28 10/25/22 08:10:52 10/25/22 08:10:52 ccu3-webui user-level Info kernel "[ 24.686261] eq3loop: created slave mmd_bidcos" 192.168.178.28 10/25/22 08:10:52 10/25/22 08:10:52 ccu3-webui user-level Info kernel "[ 24.685635] eq3loop: created slave mmd_hmip" 192.168.178.28 10/25/22 08:10:52 10/25/22 08:10:52 ccu3-webui user-level Info update-lgw-firmware "No gateway found in config file /etc/config/rfd.conf" 192.168.178.28 10/25/22 08:10:52 10/25/22 08:10:52 ccu3-webui system Warning ifplugd(eth0)[466] "client: eth0: up, dhcp, firewall, 192.168.178.28, " 192.168.178.28 10/25/22 08:10:52 10/25/22 08:10:52 ccu3-webui user-level Info root "Updating RF Lan Gateway Firmware" 192.168.178.28 10/25/22 08:10:52 10/25/22 08:10:52 ccu3-webui user-level Info root "Updating RF Lan Gateway Coprocessor Firmware" 192.168.178.28 10/25/22 08:10:52 10/25/22 08:10:52 ccu3-webui system Info ifplugd(eth0)[466] "Program executed successfully." 192.168.178.28 10/25/22 08:10:52 10/25/22 08:10:52 ccu3-webui user-level Info firewall "configuration set" 192.168.178.28 10/25/22 08:10:52 10/25/22 08:10:52 ccu3-webui system Info ntpd[484] "Listen normally on 4 eth0 192.168.178.28:123" 192.168.178.28 10/25/22 08:10:52 10/25/22 08:10:52 ccu3-webui user-level Debug update-coprocessor "firmware filename is: coprocessor_update_hm_only.eq3" 192.168.178.28 10/25/22 08:10:51 10/25/22 08:10:51 ccu3-webui user-level Info kernel "[ 23.400548] ip6_tables: (C) 2000-2006 Netfilter Core Team" 192.168.178.28 10/25/22 08:10:50 10/25/22 08:10:50 ccu3-webui user-level Info kernel "[ 22.873584] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)" 192.168.178.28 10/25/22 08:08:20 10/25/22 08:08:20 ccu3-webui user-level Error rfd "XmlRpc transport error calling system.listMethods({""TreloSpin:hm-rpc.0:1e401c9a41474a475d5f92b9cb81305b""}) on http://192.168.178.20:42001/RPC2:" -
@piemur sagte in hm-rega/ hm-rpc Absturz CCU3 und Datenpunkte fehlen:
Mach mal in der CCU zum Testen alle Ports auf und keine Einschränkungen für
alles. -
@spacerx
Gleiches Verhalten, sobald ich hm-rpc.0 aktiviere, hängt sich die CCU auf.
(Startseite zeigt keine Firmware an und Systemsteuerung nicht auswählbar)und die Datenpunkte fehlen unter Objekte (0 vorhanden, 1-7 keine Datenpunkte).
Ist schon merkwürdig... und ich kann das Verhalten nicht erklären.
-
@piemur sagte in hm-rega/ hm-rpc Absturz CCU3 und Datenpunkte fehlen:
Protokoll Syslog ccu3: (Ausschnitt)
bist du den Fehlermeldungen mal nachgegangen?
-
@homoran
Leider Nein, da mir dies vorher nicht aufgefallen ist und ich als Newbee schon stolz bin einen Syslog-Server aufgesetzt zu haben. Daher kann ich nicht sagen, woher die Fehlermeldungen kommen und wie ich sie in der CCU lösen kann.
Ich dachte bisher, die Fehlermeldungen kommen durch den Verbindungsaufbau / Anfragen vom iobroker. -
@piemur sagte in hm-rega/ hm-rpc Absturz CCU3 und Datenpunkte fehlen:
Anfragen vom iobroker.
ja, z.B.
@piemur sagte in hm-rega/ hm-rpc Absturz CCU3 und Datenpunkte fehlen:
"ERROR: XMLRPC 'getValue' call failed (interface: 1011, params: {""000A9A49A2DEC6:1"",""ACTUAL_TEMPERATURE""})
ich denke das ist ein HmIP Gerät
-
@homoran said in hm-rega/ hm-rpc Absturz CCU3 und Datenpunkte fehlen:
000A9A49A2DEC6
Ja, das ist ein HmIP-WTH-2 (Firmware 2.8.2), dies ist in einer Gruppe mit 3 Thermostaten.
Aktuell habe ich noch nicht so viele Geräte in der CCU3 am laufen.
Die meisten Geräte sind bei mir HmIP. Vorwiegend Thermostate(8) und die 4x HmIP-WTH-2, sowie zwei Fensterkontakte. -
@homoran sagte in hm-rega/ hm-rpc Absturz CCU3 und Datenpunkte fehlen:
"ERROR: XMLRPC 'getValue' call
und irgendwas ruft diesen Befehl auf.
ob das jetzt zum freeze führt ist natürlich noch nicht klar
-
@homoran
Ich bin mittlerweile so weit, dass ich die CCU3 neu aufsetzen möchte.
Irgendetwas spinnt mir da im Hintergrund und ich weiss nicht was.
Ich habe schon beinah alles rausgeworfen, diagramme, cuxd, Redmatic, etcInteressanterweise sind es alles hmip-WTH2 komponenten, die bei ccu3 start Errors im Protokoll generieren.
Ich werde diese mal löschen und nacheinander neu anlernen. Mal sehen was passiert.Die Homatic-App verwende ich nicht, eine Homatic-Cloud hab ich nicht eingerichtet.
-
-
@bahnuhr
ich meine die App mit der man hmip per handy steuert... sowas benötige ich nicht.
Ich möchte aktuell nur noch das iobroker läuft.... damit loslegen kann.Aber wie es so ist, stolpern Steinchen und Felsbrocken einem in den Weg, woraus man lernen kann.
Ich werd mich jetzt um die ccu3 kümmern und platt machen, mal sehen was passiert.
Eine andere Möglichkeit sehe ich grad nicht. -
Datenpunkte sind nun vorhanden!
Der Klassiker Windows firewall einstellungen fehlten....Nachdem ich mir die "Anleitungen" in verschiedenen Topics nochmal durchgelesen habe.... Bin ich auf die Windows firewall einstellungen aufmerksam geworden.
und hier fehlten mir die Firewall einstellungen.
Dabei hat mir folgender Link geholfen:https://github.com/Acgua/ioBroker-Doc/blob/main/windows-10-new-installation.md
https://forum.iobroker.net/topic/33421/iobroker-unter-windows-installieren-ohne-installer
-
@piemur
Man merkt ich bin ein Newbee auch hier im Forum
Jetzt versuche ich den Punkt als "gelöst" zu setzen und weiss nicht genau wie....[Gelöst]
