NEWS
Probleme mit Installation von ESP Home@0.2.4
-
@thomas-braun said in Probleme mit Installation von ESP Home@0.2.4:
sudo apt full-update
pi@raspberrypi:~ $ sudo apt full-update E: Ungültige Operation full-update pi@raspberrypi:~ $ pi@raspberrypi:~ $ sudo apt autoremove Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Die folgenden Pakete werden ENTFERNT: libpython2-dev libpython2-stdlib libpython2.7 libpython2.7-dev libpython2.7-minimal libpython2.7-stdlib python2 python2-dev python2-minimal python2.7 python2.7-dev python2.7-minimal 0 aktualisiert, 0 neu installiert, 12 zu entfernen und 2 nicht aktualisiert. Nach dieser Operation werden 27,2 MB Plattenplatz freigegeben. Möchten Sie fortfahren? [J/n] j (Lese Datenbank ... 54688 Dateien und Verzeichnisse sind derzeit installiert.) Entfernen von python2-dev (2.7.18-3) ... Entfernen von libpython2-dev:armhf (2.7.18-3) ... Entfernen von python2 (2.7.18-3) ... Entfernen von libpython2-stdlib:armhf (2.7.18-3) ... Entfernen von python2.7-dev (2.7.18-8) ... Entfernen von libpython2.7-dev:armhf (2.7.18-8) ... Entfernen von libpython2.7:armhf (2.7.18-8) ... Entfernen von python2.7 (2.7.18-8) ... Entfernen von libpython2.7-stdlib:armhf (2.7.18-8) ... Entfernen von python2-minimal (2.7.18-3) ... Entfernen von python2.7-minimal (2.7.18-8) ... Unlinking and removing bytecode for runtime python2.7 Entfernen von libpython2.7-minimal:armhf (2.7.18-8) ... Trigger für man-db (2.9.4-2) werden verarbeitet ... Trigger für mailcap (3.69) werden verarbeitet ... Trigger für libc-bin (2.31-13+rpt2+rpi1+deb11u2) werden verarbeitet ... pi@raspberrypi:~ $sudo apt full-upgradeDas kommt davon, das es hier im Forum keine bash completion gibt. Normalerweise tippt man das ja nie vollständig ein... :-)
-
sudo apt full-upgradeDas kommt davon, das es hier im Forum keine bash completion gibt. Normalerweise tippt man das ja nie vollständig ein... :-)
pi@raspberrypi:~ $ sudo apt full-upgrade Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Paketaktualisierung (Upgrade) wird berechnet… Fertig Die folgenden Pakete werden aktualisiert (Upgrade): libntfs-3g883 ntfs-3g 2 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 547 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 0 B Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] j Holen:1 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf ntfs-3g armhf 1:2017.3.23AR.3-4+deb11u2 [379 kB] Holen:2 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libntfs-3g883 armhf 1:2017.3.23AR.3-4+deb11u2 [168 kB] Es wurden 547 kB in 1 s geholt (794 kB/s). Changelogs werden gelesen... Fertig (Lese Datenbank ... 53788 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../ntfs-3g_1%3a2017.3.23AR.3-4+deb11u2_armhf.deb ... Entpacken von ntfs-3g (1:2017.3.23AR.3-4+deb11u2) über (1:2017.3.23AR.3-4+deb11u1) ... Vorbereitung zum Entpacken von .../libntfs-3g883_1%3a2017.3.23AR.3-4+deb11u2_armhf.deb ... Entpacken von libntfs-3g883 (1:2017.3.23AR.3-4+deb11u2) über (1:2017.3.23AR.3-4+deb11u1) ... libntfs-3g883 (1:2017.3.23AR.3-4+deb11u2) wird eingerichtet ... ntfs-3g (1:2017.3.23AR.3-4+deb11u2) wird eingerichtet ... Trigger für libc-bin (2.31-13+rpt2+rpi1+deb11u2) werden verarbeitet ... Trigger für man-db (2.9.4-2) werden verarbeitet ... Trigger für initramfs-tools (0.140) werden verarbeitet ... pi@raspberrypi:~ $ -
sudo apt full-upgradeDas kommt davon, das es hier im Forum keine bash completion gibt. Normalerweise tippt man das ja nie vollständig ein... :-)
$ iobroker add esphome --host raspberrypi NPM version: 6.14.17 Installing iobroker.esphome@0.2.4... (System call) > iobroker.esphome@0.2.4 install /opt/iobroker/node_modules/iobroker.esphome> npip install No python_modules directory; installing pip locally if needed. Successfully completed pip check. Collecting esphome>=2021.8 Using cached esphome-2022.5.1-py2.py3-none-any.whl (2.3 MB) Collecting tornado>=3.2 Using cached tornado-6.1.tar.gz (497 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting tzlocal==4.2 Using cached tzlocal-4.2-py3-none-any.whl (19 kB) Collecting aioesphomeapi==10.8.2 Using cached aioesphomeapi-10.8.2-py2.py3-none-any.whl (49 kB) Collecting pyserial==3.5 Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB) Collecting voluptuous==0.13.1 Using cached voluptuous-0.13.1-py3-none-any.whl (29 kB) Collecting esptool==3.3 Using cached esptool-3.3.tar.gz (213 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting kconfiglib==13.7.1 Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB) Collecting paho-mqtt==1.6.1 Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting PyYAML==6.0 Using cached PyYAML-6.0.tar.gz (124 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting zeroconf==0.38.4 Using cached zeroconf-0.38.4-py3-none-any.whl (106 kB) Collecting click==8.1.3 Using cached click-8.1.3-py3-none-any.whl (96 kB) Collecting colorama==0.4.4 Using cached colorama-0.4.4-py2.py3-none-any.whl (16 kB) Collecting tzdata>=2021.1 Using cached tzdata-2022.1-py2.py3-none-any.whl (339 kB) Collecting platformio==5.2.5 Using cached platformio-5.2.5.tar.gz (218 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting esphome-dashboard==20220508.0 Using cached esphome_dashboard-20220508.0-py3-none-any.whl (601 kB) Collecting noiseprotocol<1.0,>=0.3.1 Using cached noiseprotocol-0.3.1-py3-none-any.whl (20 kB) Collecting protobuf<4.0,>=3.12.2 Using cached protobuf-3.20.1-py2.py3-none-any.whl (162 kB) Collecting bitstring>=3.1.6 Using cached bitstring-3.1.9-py3-none-any.whl (38 kB) Collecting cryptography>=2.1.4 Using cached cryptography-37.0.2.tar.gz (585 kB) Installing build dependencies: started Installing build dependencies: finished with status 'error' host.raspberrypi Cannot install iobroker.esphome@0.2.4: 1 ERROR: Process exited with code 25Ich gebe vorerst mal auf! Danke!!
-
Mach es ausnahmsweise mal über npm direkt.
cd /opt/iobroker npm install iobroker.esphome -
Mach es ausnahmsweise mal über npm direkt.
cd /opt/iobroker npm install iobroker.esphomepi@raspberrypi:/opt/iobroker $ npm install iobroker.esphome > iobroker.esphome@0.2.4 install /opt/iobroker/node_modules/iobroker.esphome > npip install No python_modules directory; installing pip locally if needed. Cache entry deserialization failed, entry ignored Cache entry deserialization failed, entry ignored Successfully completed pip check. Collecting esphome>=2021.8 Using cached esphome-2022.5.1-py2.py3-none-any.whl (2.3 MB) Collecting tornado>=3.2 Using cached tornado-6.1.tar.gz (497 kB) Preparing metadata (setup.py) ... done Collecting pyserial==3.5 Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB) Collecting PyYAML==6.0 Using cached PyYAML-6.0.tar.gz (124 kB) Installing build dependencies ... done Getting requirements to build wheel ... done Preparing metadata (pyproject.toml) ... done Collecting tzlocal==4.2 Using cached tzlocal-4.2-py3-none-any.whl (19 kB) Collecting click==8.1.3 Using cached click-8.1.3-py3-none-any.whl (96 kB) Collecting tzdata>=2021.1 Using cached tzdata-2022.1-py2.py3-none-any.whl (339 kB) Collecting voluptuous==0.13.1 Using cached voluptuous-0.13.1-py3-none-any.whl (29 kB) Collecting aioesphomeapi==10.8.2 Using cached aioesphomeapi-10.8.2-py2.py3-none-any.whl (49 kB) Collecting colorama==0.4.4 Using cached colorama-0.4.4-py2.py3-none-any.whl (16 kB) Collecting paho-mqtt==1.6.1 Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Preparing metadata (setup.py) ... done Collecting esptool==3.3 Using cached esptool-3.3.tar.gz (213 kB) Preparing metadata (setup.py) ... done Collecting esphome-dashboard==20220508.0 Using cached esphome_dashboard-20220508.0-py3-none-any.whl (601 kB) Collecting kconfiglib==13.7.1 Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB) Collecting platformio==5.2.5 Using cached platformio-5.2.5.tar.gz (218 kB) Preparing metadata (setup.py) ... done Collecting zeroconf==0.38.4 Using cached zeroconf-0.38.4-py3-none-any.whl (106 kB) Collecting protobuf<4.0,>=3.12.2 Using cached protobuf-3.20.1-py2.py3-none-any.whl (162 kB) Collecting noiseprotocol<1.0,>=0.3.1 Using cached noiseprotocol-0.3.1-py3-none-any.whl (20 kB) Collecting bitstring>=3.1.6 Using cached bitstring-3.1.9-py3-none-any.whl (38 kB) Collecting cryptography>=2.1.4 Using cached cryptography-37.0.2.tar.gz (585 kB) Installing build dependencies ... error error: subprocess-exited-with-error × pip subprocess to install build dependencies did not run successfully. │ exit code: 1 ╰─> [126 lines of output] Collecting setuptools!=60.9.0,>=40.6.0 Using cached setuptools-62.3.3-py3-none-any.whl (1.2 MB) Collecting wheel Using cached wheel-0.37.1-py2.py3-none-any.whl (35 kB) Collecting cffi>=1.12 Using cached cffi-1.15.0.tar.gz (484 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting setuptools-rust>=0.11.4 Using cached setuptools_rust-1.3.0-py3-none-any.whl (21 kB) Collecting pycparser Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB) Collecting semantic-version<3,>=2.8.2 Using cached semantic_version-2.10.0-py2.py3-none-any.whl (15 kB) Collecting typing-extensions>=3.7.4.3 Using cached typing_extensions-4.2.0-py3-none-any.whl (24 kB) Building wheels for collected packages: cffi Building wheel for cffi (setup.py): started Building wheel for cffi (setup.py): finished with status 'error' error: subprocess-exited-with-error × python setup.py bdist_wheel did not run successfully. │ exit code: 1 ╰─> [38 lines of output] /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/config/setupcfg.py:459: SetuptoolsDeprecationWarning: The license_file parameter is deprecated, use license_files instead. warnings.warn(msg, warning_class) running bdist_wheel running build running build_py creating build creating build/lib.linux-armv7l-cpython-39 creating build/lib.linux-armv7l-cpython-39/cffi copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/lock.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/vengine_gen.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/error.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/model.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/__init__.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/ffiplatform.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/api.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/cparser.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/commontypes.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/verifier.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/pkgconfig.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/recompiler.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/_cffi_include.h -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/parse_c_type.h -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/_embedding.h -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-cpython-39/cffi running build_ext building '_cffi_backend' extension creating build/temp.linux-armv7l-cpython-39 creating build/temp.linux-armv7l-cpython-39/c arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-armv7l-cpython-39/c/_cffi_backend.o c/_cffi_backend.c:2:10: fatal error: Python.h: Datei oder Verzeichnis nicht gefunden 2 | #include <Python.h> | ^~~~~~~~~~ compilation terminated. error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. ERROR: Failed building wheel for cffi Running setup.py clean for cffi Failed to build cffi Installing collected packages: wheel, typing-extensions, setuptools, semantic-version, pycparser, setuptools-rust, cffi Running setup.py install for cffi: started Running setup.py install for cffi: finished with status 'error' error: subprocess-exited-with-error × Running setup.py install for cffi did not run successfully. │ exit code: 1 ╰─> [40 lines of output] /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/config/setupcfg.py:459: SetuptoolsDeprecationWarning: The license_file parameter is deprecated, use license_files instead. warnings.warn(msg, warning_class) running install /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools. warnings.warn( running build running build_py creating build creating build/lib.linux-armv7l-cpython-39 creating build/lib.linux-armv7l-cpython-39/cffi copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/lock.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/vengine_gen.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/error.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/model.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/__init__.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/ffiplatform.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/api.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/cparser.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/commontypes.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/verifier.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/pkgconfig.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/recompiler.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/_cffi_include.h -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/parse_c_type.h -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/_embedding.h -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-cpython-39/cffi running build_ext building '_cffi_backend' extension creating build/temp.linux-armv7l-cpython-39 creating build/temp.linux-armv7l-cpython-39/c arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-armv7l-cpython-39/c/_cffi_backend.o c/_cffi_backend.c:2:10: fatal error: Python.h: Datei oder Verzeichnis nicht gefunden 2 | #include <Python.h> | ^~~~~~~~~~ compilation terminated. error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: legacy-install-failure × Encountered error while trying to install package. ╰─> cffi note: This is an issue with the package mentioned above, not pip. hint: See above for output from the failure. [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error × pip subprocess to install build dependencies did not run successfully. │ exit code: 1 ╰─> See above for output. note: This error originates from a subprocess, and is likely not a problem with pip. npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! iobroker.esphome@0.2.4 install: `npip install` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the iobroker.esphome@0.2.4 install script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-06-11T12_14_44_232Z-debug.log pi@raspberrypi:/opt/iobrokerBenötige ich für Python 3 eine Lizenz?
-
pi@raspberrypi:/opt/iobroker $ npm install iobroker.esphome > iobroker.esphome@0.2.4 install /opt/iobroker/node_modules/iobroker.esphome > npip install No python_modules directory; installing pip locally if needed. Cache entry deserialization failed, entry ignored Cache entry deserialization failed, entry ignored Successfully completed pip check. Collecting esphome>=2021.8 Using cached esphome-2022.5.1-py2.py3-none-any.whl (2.3 MB) Collecting tornado>=3.2 Using cached tornado-6.1.tar.gz (497 kB) Preparing metadata (setup.py) ... done Collecting pyserial==3.5 Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB) Collecting PyYAML==6.0 Using cached PyYAML-6.0.tar.gz (124 kB) Installing build dependencies ... done Getting requirements to build wheel ... done Preparing metadata (pyproject.toml) ... done Collecting tzlocal==4.2 Using cached tzlocal-4.2-py3-none-any.whl (19 kB) Collecting click==8.1.3 Using cached click-8.1.3-py3-none-any.whl (96 kB) Collecting tzdata>=2021.1 Using cached tzdata-2022.1-py2.py3-none-any.whl (339 kB) Collecting voluptuous==0.13.1 Using cached voluptuous-0.13.1-py3-none-any.whl (29 kB) Collecting aioesphomeapi==10.8.2 Using cached aioesphomeapi-10.8.2-py2.py3-none-any.whl (49 kB) Collecting colorama==0.4.4 Using cached colorama-0.4.4-py2.py3-none-any.whl (16 kB) Collecting paho-mqtt==1.6.1 Using cached paho-mqtt-1.6.1.tar.gz (99 kB) Preparing metadata (setup.py) ... done Collecting esptool==3.3 Using cached esptool-3.3.tar.gz (213 kB) Preparing metadata (setup.py) ... done Collecting esphome-dashboard==20220508.0 Using cached esphome_dashboard-20220508.0-py3-none-any.whl (601 kB) Collecting kconfiglib==13.7.1 Using cached kconfiglib-13.7.1-py2.py3-none-any.whl (145 kB) Collecting platformio==5.2.5 Using cached platformio-5.2.5.tar.gz (218 kB) Preparing metadata (setup.py) ... done Collecting zeroconf==0.38.4 Using cached zeroconf-0.38.4-py3-none-any.whl (106 kB) Collecting protobuf<4.0,>=3.12.2 Using cached protobuf-3.20.1-py2.py3-none-any.whl (162 kB) Collecting noiseprotocol<1.0,>=0.3.1 Using cached noiseprotocol-0.3.1-py3-none-any.whl (20 kB) Collecting bitstring>=3.1.6 Using cached bitstring-3.1.9-py3-none-any.whl (38 kB) Collecting cryptography>=2.1.4 Using cached cryptography-37.0.2.tar.gz (585 kB) Installing build dependencies ... error error: subprocess-exited-with-error × pip subprocess to install build dependencies did not run successfully. │ exit code: 1 ╰─> [126 lines of output] Collecting setuptools!=60.9.0,>=40.6.0 Using cached setuptools-62.3.3-py3-none-any.whl (1.2 MB) Collecting wheel Using cached wheel-0.37.1-py2.py3-none-any.whl (35 kB) Collecting cffi>=1.12 Using cached cffi-1.15.0.tar.gz (484 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting setuptools-rust>=0.11.4 Using cached setuptools_rust-1.3.0-py3-none-any.whl (21 kB) Collecting pycparser Using cached pycparser-2.21-py2.py3-none-any.whl (118 kB) Collecting semantic-version<3,>=2.8.2 Using cached semantic_version-2.10.0-py2.py3-none-any.whl (15 kB) Collecting typing-extensions>=3.7.4.3 Using cached typing_extensions-4.2.0-py3-none-any.whl (24 kB) Building wheels for collected packages: cffi Building wheel for cffi (setup.py): started Building wheel for cffi (setup.py): finished with status 'error' error: subprocess-exited-with-error × python setup.py bdist_wheel did not run successfully. │ exit code: 1 ╰─> [38 lines of output] /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/config/setupcfg.py:459: SetuptoolsDeprecationWarning: The license_file parameter is deprecated, use license_files instead. warnings.warn(msg, warning_class) running bdist_wheel running build running build_py creating build creating build/lib.linux-armv7l-cpython-39 creating build/lib.linux-armv7l-cpython-39/cffi copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/lock.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/vengine_gen.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/error.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/model.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/__init__.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/ffiplatform.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/api.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/cparser.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/commontypes.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/verifier.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/pkgconfig.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/recompiler.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/_cffi_include.h -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/parse_c_type.h -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/_embedding.h -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-cpython-39/cffi running build_ext building '_cffi_backend' extension creating build/temp.linux-armv7l-cpython-39 creating build/temp.linux-armv7l-cpython-39/c arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-armv7l-cpython-39/c/_cffi_backend.o c/_cffi_backend.c:2:10: fatal error: Python.h: Datei oder Verzeichnis nicht gefunden 2 | #include <Python.h> | ^~~~~~~~~~ compilation terminated. error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. ERROR: Failed building wheel for cffi Running setup.py clean for cffi Failed to build cffi Installing collected packages: wheel, typing-extensions, setuptools, semantic-version, pycparser, setuptools-rust, cffi Running setup.py install for cffi: started Running setup.py install for cffi: finished with status 'error' error: subprocess-exited-with-error × Running setup.py install for cffi did not run successfully. │ exit code: 1 ╰─> [40 lines of output] /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/config/setupcfg.py:459: SetuptoolsDeprecationWarning: The license_file parameter is deprecated, use license_files instead. warnings.warn(msg, warning_class) running install /opt/iobroker/node_modules/iobroker.esphome/python_modules/lib/python3.9/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools. warnings.warn( running build running build_py creating build creating build/lib.linux-armv7l-cpython-39 creating build/lib.linux-armv7l-cpython-39/cffi copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/lock.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/vengine_gen.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/error.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/model.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/__init__.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/ffiplatform.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/api.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/cparser.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/commontypes.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/verifier.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/pkgconfig.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/recompiler.py -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/_cffi_include.h -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/parse_c_type.h -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/_embedding.h -> build/lib.linux-armv7l-cpython-39/cffi copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-cpython-39/cffi running build_ext building '_cffi_backend' extension creating build/temp.linux-armv7l-cpython-39 creating build/temp.linux-armv7l-cpython-39/c arm-linux-gnueabihf-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -ffile-prefix-map=/python3.9-3.9.2=. -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/python3.9 -c c/_cffi_backend.c -o build/temp.linux-armv7l-cpython-39/c/_cffi_backend.o c/_cffi_backend.c:2:10: fatal error: Python.h: Datei oder Verzeichnis nicht gefunden 2 | #include <Python.h> | ^~~~~~~~~~ compilation terminated. error: command '/usr/bin/arm-linux-gnueabihf-gcc' failed with exit code 1 [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: legacy-install-failure × Encountered error while trying to install package. ╰─> cffi note: This is an issue with the package mentioned above, not pip. hint: See above for output from the failure. [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error × pip subprocess to install build dependencies did not run successfully. │ exit code: 1 ╰─> See above for output. note: This error originates from a subprocess, and is likely not a problem with pip. npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! iobroker.esphome@0.2.4 install: `npip install` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the iobroker.esphome@0.2.4 install script. npm ERR! This is probably not a problem with npm. There is likely additional logging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2022-06-11T12_14_44_232Z-debug.log pi@raspberrypi:/opt/iobrokerBenötige ich für Python 3 eine Lizenz?
@tontechniker sagte in Probleme mit Installation von ESP Home@0.2.4:
Benötige ich für Python 3 eine Lizenz?
Nein, aber ggf. dev-Files und ein buildenvironment
apt policy python-dev-is-python3 build-essential -
@tontechniker sagte in Probleme mit Installation von ESP Home@0.2.4:
Benötige ich für Python 3 eine Lizenz?
Nein, aber ggf. dev-Files und ein buildenvironment
apt policy python-dev-is-python3 build-essentialpi@raspberrypi:/opt/iobroker $ apt policy python-dev-is-python3 build-essential python-dev-is-python3: Installiert: (keine) Installationskandidat: 3.9.2-1 Versionstabelle: 3.9.2-1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages build-essential: Installiert: 12.9 Installationskandidat: 12.9 Versionstabelle: *** 12.9 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status pi@raspberrypi:/opt/iobroker $ -
pi@raspberrypi:/opt/iobroker $ apt policy python-dev-is-python3 build-essential python-dev-is-python3: Installiert: (keine) Installationskandidat: 3.9.2-1 Versionstabelle: 3.9.2-1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages build-essential: Installiert: 12.9 Installationskandidat: 12.9 Versionstabelle: *** 12.9 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status pi@raspberrypi:/opt/iobroker $@tontechniker sagte in Probleme mit Installation von ESP Home@0.2.4:
python-dev-is-python3
Dann installier das nach:
sudo apt install python-dev-is-python3 -
@tontechniker sagte in Probleme mit Installation von ESP Home@0.2.4:
python-dev-is-python3
Dann installier das nach:
sudo apt install python-dev-is-python3@thomas-braun
Nach der Installation:pi@raspberrypi:/opt/iobroker $ apt policy python-dev-is-python3 build-essential python-dev-is-python3: Installiert: 3.9.2-1 Installationskandidat: 3.9.2-1 Versionstabelle: *** 3.9.2-1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status build-essential: Installiert: 12.9 Installationskandidat: 12.9 Versionstabelle: *** 12.9 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status pi@raspberrypi:/opt/iobroker $Soll ich nochmal rebooten und versuchen ESP zu installieren?
-
@thomas-braun
Nach der Installation:pi@raspberrypi:/opt/iobroker $ apt policy python-dev-is-python3 build-essential python-dev-is-python3: Installiert: 3.9.2-1 Installationskandidat: 3.9.2-1 Versionstabelle: *** 3.9.2-1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status build-essential: Installiert: 12.9 Installationskandidat: 12.9 Versionstabelle: *** 12.9 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status pi@raspberrypi:/opt/iobroker $Soll ich nochmal rebooten und versuchen ESP zu installieren?
Ich vermute die Installation von esphome funktioniert nun.
Ansonsten wüsste ich auch nicht weiter. -
Ich vermute die Installation von esphome funktioniert nun.
Ansonsten wüsste ich auch nicht weiter.@thomas-braun
Hatte immernoch Fehlermeldung. Dann in Console Install nochmal gestartet und am Ende Fehlermeldung, dass Rust-Compiler >=1.41.0 sein muß. Habe dann "Pip" installiert und mitpip install --upgrade Rustden Upgrade durchgeführt. Danach von Admin aus Install ESP gestartet und - siehe da! Es Funktioniert!
Vielen Dank für Deine/Eure Hilfe!!
Hans -
@thomas-braun
Hatte immernoch Fehlermeldung. Dann in Console Install nochmal gestartet und am Ende Fehlermeldung, dass Rust-Compiler >=1.41.0 sein muß. Habe dann "Pip" installiert und mitpip install --upgrade Rustden Upgrade durchgeführt. Danach von Admin aus Install ESP gestartet und - siehe da! Es Funktioniert!
Vielen Dank für Deine/Eure Hilfe!!
Hans@tontechniker
Da frag ich mich warum dass nur bei Dir so ein Umstand war den Adapter ans laufen zu bekommen?
Das Buster nach Bullseye upzugraden funktioniert zwar, aber ne Neuinstallation dauert nicht wirklich länger und ist definitiv sauber. Könnte ne mögliche Ursache sein, oder bei mir wurde das bei Dir nun manuell installierte Zeug im Zuge einer anderen Installation schon unbemerkt von mir bereits installiert. Hatte einfach mal den Adapter von GIT zum Testen geladen und lief sofort ohne Fehler durch. -
@tontechniker
Da frag ich mich warum dass nur bei Dir so ein Umstand war den Adapter ans laufen zu bekommen?
Das Buster nach Bullseye upzugraden funktioniert zwar, aber ne Neuinstallation dauert nicht wirklich länger und ist definitiv sauber. Könnte ne mögliche Ursache sein, oder bei mir wurde das bei Dir nun manuell installierte Zeug im Zuge einer anderen Installation schon unbemerkt von mir bereits installiert. Hatte einfach mal den Adapter von GIT zum Testen geladen und lief sofort ohne Fehler durch.@jan1 Ich kann Dir nicht sagen, wie das passiert ist. Ich habe vor einigen Monaten Bullseye auf einer SSD installiert, eingestellt und dann IoBroker installiert und dann mein IoBroker-Backup eingespielt.
Dir auch nochmal ein herzliches "DANKESCHÖN"! -
@jan1 Ich kann Dir nicht sagen, wie das passiert ist. Ich habe vor einigen Monaten Bullseye auf einer SSD installiert, eingestellt und dann IoBroker installiert und dann mein IoBroker-Backup eingespielt.
Dir auch nochmal ein herzliches "DANKESCHÖN"!@tontechniker
Ok, hattes Du nicht geschrieben, dass Du das Bullseye von Buster hochgezogen hast? Wenn nicht, dann ist es ja ne Neuinstallation, wobei man das eigentlich nicht von ner CD macht beim PI, sondern mit dem dafür vorgesehenen Tool ;)Edit:
ok das mit dem Upgrade war der Kamerad aus dem anderen Thread.
Scheiß Konzentration Probleme nach Corna, LOL -
Ich bekomme es leider auch nicht hin den espHome Adapter zu installieren.
Kann mir wer helfen :( ?NPM version: 8.11.0 Installing iobroker.esphome@0.2.4... (System call) host.Pi4ioBroker Cannot install iobroker.esphome@0.2.4: 1 ERROR: Process exited with code 25 -
Ich bekomme es leider auch nicht hin den espHome Adapter zu installieren.
Kann mir wer helfen :( ?NPM version: 8.11.0 Installing iobroker.esphome@0.2.4... (System call) host.Pi4ioBroker Cannot install iobroker.esphome@0.2.4: 1 ERROR: Process exited with code 25Installier den Adapter mit --debug-Option.
Dann sieht man wo es da klemmen könnte. -
Installier den Adapter mit --debug-Option.
Dann sieht man wo es da klemmen könnte.Könntest du mir schreiben welche Befehle ich dafür verwenden muss in Putty :-/
-
Könntest du mir schreiben welche Befehle ich dafür verwenden muss in Putty :-/
@sushibomba Tanzen wir jetzt auf zwei Hochzeiten?
-
@sushibomba Tanzen wir jetzt auf zwei Hochzeiten?
-
Nein war nicht meine Absicht. Hatte nur in beiden geschrieben weil ich nicht wusste wo die Leute häufiger rein schauen :(
@sushibomba sagte in Probleme mit Installation von ESP Home@0.2.4:
Nein war nicht meine Absicht. Hatte nur in beiden geschrieben weil ich nicht wusste wo die Leute häufiger rein schauen :(
also doch eine Absicht dahinter
776
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge