[Frage] Xiaomi Vacuum cleaner

bahnuhr

! Es lässt das Gerät einfach vom Terminal betreiben sobald man dieses Token zuvor extrahiert hat, also ist nicht so super Laiefreundlich, ich habe aber ein paar Beispiele hinzugefügt zu zeigen was es jetzt kann: https://github.com/rytilahti/python-mir … e-examples . Zurzeit alle Grundfunktionalität ist schon da außer Fernbedienung (links fahren, rechts fahren usw.), Einstellung von Putzplanungen, u.ä. Kleinigkeiten.

Hab es unter win7 nicht zum Laufen gebracht.

mfg

bahnuhr

~~@skorpil:~~

Den Token und die ip habe ich. Werde ich in den kommenden Tagen testen. `

Hast du den robo denn mit dem python Befehl zum starten gebracht.

Der Start Befehl hat bei mir keine Wirkung (siehe oben).

mfg

skorpil

Bei mir hat die Installation von Python-mirobo auf einem Raspi 3 NICHT geklappt. Hier der Fehlerbericht.

Liebe Grüße

Bernd

tpr

~~@skorpil:~~

Bei mir hat die Installation von Python-mirobo auf einem Raspi 3 NICHT geklappt. Hier der Fehlerbericht. `
Du brauchst python3 für das Skript, ich glaube das ist das Problem. Wenn aber nicht, das steht die Fehlermeldung irgendwo höher als was im Bild zu stehen ist.

skorpil

Ahhhh, ich dachte Python 2. alles klar!

tpr

~~@bahnuhr:~~

Hab es unter win7 nicht zum Laufen gebracht. `
Gibt es eine Fehlermeldung dazu? Probier mal mit -d wie "mirobo -d start" um mehrere Information zu sehen was wird vermitteln.

skorpil

Leider auch Fehlermeldung bei Python 3:

  Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 100%  389  Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB):            Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 389kB downloaded
Downloading/unpacking cffi>=1.4.1 (from cryptography->python-mirobo)
  Downloading cffi-1.9.1.tar.gz (407kB): 407kB downloaded
  Running setup.py (path:/tmp/pip-build-vmqvaiw6/cffi/setup.py) egg_info for package cffi
    Package libffi was not found in the pkg-config search path.
    Perhaps you should add the directory containing `libffi.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'libffi' found
    Package libffi was not found in the pkg-config search path.
    Perhaps you should add the directory containing `libffi.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'libffi' found
    Package libffi was not found in the pkg-config search path.
    Perhaps you should add the directory containing `libffi.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'libffi' found
    Package libffi was not found in the pkg-config search path.
    Perhaps you should add the directory containing `libffi.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'libffi' found
    Package libffi was not found in the pkg-config search path.
    Perhaps you should add the directory containing `libffi.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'libffi' found

Downloading/unpacking appdirs>=1.4.0 (from setuptools>=11.3->cryptography->python-mirobo)
  Downloading appdirs-1.4.2-py2.py3-none-any.whl
Downloading/unpacking packaging>=16.8 (from setuptools>=11.3->cryptography->python-mirobo)
  Downloading packaging-16.8-py2.py3-none-any.whl
Downloading/unpacking pycparser (from cffi>=1.4.1->cryptography->python-mirobo)
  Downloading pycparser-2.17.tar.gz (231kB): 231kB downloaded
  Running setup.py (path:/tmp/pip-build-vmqvaiw6/pycparser/setup.py) egg_info for package pycparser

    warning: no previously-included files matching 'yacctab.*' found under directory 'tests'
    warning: no previously-included files matching 'lextab.*' found under directory 'tests'
    warning: no previously-included files matching 'yacctab.*' found under directory 'examples'
    warning: no previously-included files matching 'lextab.*' found under directory 'examples'
Downloading/unpacking pyparsing (from packaging>=16.8->setuptools>=11.3->cryptography->python-mirobo)
  Downloading pyparsing-2.1.10-py2.py3-none-any.whl (56kB): 56kB downloaded
Installing collected packages: python-mirobo, click, pretty-cron, construct, cryptography, idna, pyasn1, setuptools, cffi, appdirs, packaging, pycparser, pyparsing
  Running setup.py install for cryptography
    Package libffi was not found in the pkg-config search path.
    Perhaps you should add the directory containing `libffi.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'libffi' found
    Package libffi was not found in the pkg-config search path.
    Perhaps you should add the directory containing `libffi.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'libffi' found
    Package libffi was not found in the pkg-config search path.
    Perhaps you should add the directory containing `libffi.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'libffi' found
    Package libffi was not found in the pkg-config search path.
    Perhaps you should add the directory containing `libffi.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'libffi' found
    Package libffi was not found in the pkg-config search path.
    Perhaps you should add the directory containing `libffi.pc'
    to the PKG_CONFIG_PATH environment variable
    No package 'libffi' found
    c/_cffi_backend.c:15:17: fatal error: ffi.h: Datei oder Verzeichnis nicht gefunden
     #include <ffi.h>^
    compilation terminated.
    Traceback (most recent call last):
      File "/usr/lib/python3.4/distutils/unixccompiler.py", line 116, in _compile
        extra_postargs)
      File "/usr/lib/python3.4/distutils/ccompiler.py", line 909, in spawn
        spawn(cmd, dry_run=self.dry_run)
      File "/usr/lib/python3.4/distutils/spawn.py", line 36, in spawn
        _spawn_posix(cmd, search_path, dry_run=dry_run)
      File "/usr/lib/python3.4/distutils/spawn.py", line 162, in _spawn_posix
        % (cmd, exit_status))
    distutils.errors.DistutilsExecError: command 'arm-linux-gnueabihf-gcc' failed with exit status 1

    During handling of the above exception, another exception occurred:    
    Traceback (most recent call last):
      File "/usr/lib/python3.4/distutils/core.py", line 148, in setup
        dist.run_commands()
      File "/usr/lib/python3.4/distutils/dist.py", line 955, in run_commands
        self.run_command(cmd)
      File "/usr/lib/python3.4/distutils/dist.py", line 974, in run_command
        cmd_obj.run()
      File "/usr/lib/python3/dist-packages/setuptools/command/bdist_egg.py", line 161, in run
        cmd = self.call_command('install_lib', warn_dir=0)
      File "/usr/lib/python3/dist-packages/setuptools/command/bdist_egg.py", line 147, in call_command
        self.run_command(cmdname)
      File "/usr/lib/python3.4/distutils/cmd.py", line 313, in run_command
        self.distribution.run_command(command)
      File "/usr/lib/python3.4/distutils/dist.py", line 974, in run_command
        cmd_obj.run()
      File "/usr/lib/python3/dist-packages/setuptools/command/install_lib.py", line 22, in run
        self.build()
      File "/usr/lib/python3.4/distutils/command/install_lib.py", line 109, in build
        self.run_command('build_ext')
      File "/usr/lib/python3.4/distutils/cmd.py", line 313, in run_command
        self.distribution.run_command(command)
      File "/usr/lib/python3.4/distutils/dist.py", line 974, in run_command
        cmd_obj.run()
      File "/usr/lib/python3/dist-packages/setuptools/command/build_ext.py", line 54, in run
        _build_ext.run(self)
      File "/usr/lib/python3.4/distutils/command/build_ext.py", line 339, in run
        self.build_extensions()
      File "/usr/lib/python3.4/distutils/command/build_ext.py", line 448, in build_extensions
        self.build_extension(ext)
      File "/usr/lib/python3/dist-packages/setuptools/command/build_ext.py", line 187, in build_extension
        _build_ext.build_extension(self, ext)
      File "/usr/lib/python3.4/distutils/command/build_ext.py", line 503, in build_extension
        depends=ext.depends)
      File "/usr/lib/python3.4/distutils/ccompiler.py", line 574, in compile
        self._compile(obj, src, ext, cc_args, extra_postargs, pp_opts)
      File "/usr/lib/python3.4/distutils/unixccompiler.py", line 118, in _compile
        raise CompileError(msg)
    distutils.errors.CompileError: command 'arm-linux-gnueabihf-gcc' failed with exit status 1

    During handling of the above exception, another exception occurred:    
    Traceback (most recent call last):
      File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1063, in run_setup
        run_setup(setup_script, args)
      File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 68, in run_setup
        DirectorySandbox(setup_dir).run(runner)
      File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 114, in run
        return func()
      File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 67, in runner
        _execfile(setup_script, ns)
      File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 43, in _execfile
        exec(code, globals, locals)
      File "/tmp/easy_install-xhimgt7q/cffi-1.9.1/setup.py", line 202, in <module>for i in range(1, len(argv))):
      File "/usr/lib/python3.4/distutils/core.py", line 163, in setup
        raise SystemExit("error: " + str(msg))
    SystemExit: error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1

    During handling of the above exception, another exception occurred:    
    Traceback (most recent call last):
      File "<string>", line 1, in <module>File "/tmp/pip-build-vmqvaiw6/cryptography/setup.py", line 334, in <module>**keywords_with_side_effects(sys.argv)
      File "/usr/lib/python3.4/distutils/core.py", line 108, in setup
        _setup_distribution = dist = klass(attrs)
      File "/usr/lib/python3/dist-packages/setuptools/dist.py", line 262, in __init__
        self.fetch_build_eggs(attrs['setup_requires'])
      File "/usr/lib/python3/dist-packages/setuptools/dist.py", line 287, in fetch_build_eggs
        replace_conflicting=True,
      File "/usr/lib/python3/dist-packages/pkg_resources.py", line 631, in resolve
        dist = best[req.key] = env.best_match(req, ws, installer)
      File "/usr/lib/python3/dist-packages/pkg_resources.py", line 874, in best_match
        return self.obtain(req, installer)
      File "/usr/lib/python3/dist-packages/pkg_resources.py", line 886, in obtain
        return installer(requirement)
      File "/usr/lib/python3/dist-packages/setuptools/dist.py", line 338, in fetch_build_egg
        return cmd.easy_install(req)
      File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 636, in easy_install
        return self.install_item(spec, dist.location, tmpdir, deps)
      File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 666, in install_item
        dists = self.install_eggs(spec, download, tmpdir)
      File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 856, in install_eggs
        return self.build_and_install(setup_script, setup_base)
      File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1078, in build_and_install
        self.run_setup(setup_script, setup_base, args)
      File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1066, in run_setup
        raise DistutilsError("Setup script exited with %s" % (v.args[0],))
    distutils.errors.DistutilsError: Setup script exited with error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1
    Complete output from command /usr/bin/python3 -c "import setuptools, tokenize;__file__='/tmp/pip-build-vmqvaiw6/cryptography/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-d2rx3x4n-record/install-record.txt --single-version-externally-managed --compile:
    Package libffi was not found in the pkg-config search path.

Perhaps you should add the directory containing `libffi.pc'

to the PKG_CONFIG_PATH environment variable

No package 'libffi' found

Package libffi was not found in the pkg-config search path.

Perhaps you should add the directory containing `libffi.pc'

to the PKG_CONFIG_PATH environment variable

No package 'libffi' found

Package libffi was not found in the pkg-config search path.

Perhaps you should add the directory containing `libffi.pc'

to the PKG_CONFIG_PATH environment variable

No package 'libffi' found

Package libffi was not found in the pkg-config search path.

Perhaps you should add the directory containing `libffi.pc'

to the PKG_CONFIG_PATH environment variable

No package 'libffi' found

Package libffi was not found in the pkg-config search path.

Perhaps you should add the directory containing `libffi.pc'

to the PKG_CONFIG_PATH environment variable

No package 'libffi' found

c/_cffi_backend.c:15:17: fatal error: ffi.h: Datei oder Verzeichnis nicht gefunden

 #include <ffi.h>^

compilation terminated.

Traceback (most recent call last):

  File "/usr/lib/python3.4/distutils/unixccompiler.py", line 116, in _compile

    extra_postargs)

  File "/usr/lib/python3.4/distutils/ccompiler.py", line 909, in spawn

    spawn(cmd, dry_run=self.dry_run)

  File "/usr/lib/python3.4/distutils/spawn.py", line 36, in spawn

    _spawn_posix(cmd, search_path, dry_run=dry_run)

  File "/usr/lib/python3.4/distutils/spawn.py", line 162, in _spawn_posix

    % (cmd, exit_status))

distutils.errors.DistutilsExecError: command 'arm-linux-gnueabihf-gcc' failed with exit status 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):

  File "/usr/lib/python3.4/distutils/core.py", line 148, in setup

    dist.run_commands()

  File "/usr/lib/python3.4/distutils/dist.py", line 955, in run_commands

    self.run_command(cmd)

  File "/usr/lib/python3.4/distutils/dist.py", line 974, in run_command
    cmd_obj.run()

  File "/usr/lib/python3/dist-packages/setuptools/command/bdist_egg.py", line 161, in run

    cmd = self.call_command('install_lib', warn_dir=0)

  File "/usr/lib/python3/dist-packages/setuptools/command/bdist_egg.py", line 147, in call_command

    self.run_command(cmdname)

  File "/usr/lib/python3.4/distutils/cmd.py", line 313, in run_command

    self.distribution.run_command(command)

  File "/usr/lib/python3.4/distutils/dist.py", line 974, in run_command
    cmd_obj.run()

  File "/usr/lib/python3/dist-packages/setuptools/command/install_lib.py", line 22, in run

    self.build()

  File "/usr/lib/python3.4/distutils/command/install_lib.py", line 109, in build

    self.run_command('build_ext')

  File "/usr/lib/python3.4/distutils/cmd.py", line 313, in run_command

    self.distribution.run_command(command)

  File "/usr/lib/python3.4/distutils/dist.py", line 974, in run_command
    cmd_obj.run()

  File "/usr/lib/python3/dist-packages/setuptools/command/build_ext.py", line 54, in run

    _build_ext.run(self)

  File "/usr/lib/python3.4/distutils/command/build_ext.py", line 339, in run

    self.build_extensions()

  File "/usr/lib/python3.4/distutils/command/build_ext.py", line 448, in build_extensions

    self.build_extension(ext)

  File "/usr/lib/python3/dist-packages/setuptools/command/build_ext.py", line 187, in build_extension

    _build_ext.build_extension(self, ext)

  File "/usr/lib/python3.4/distutils/command/build_ext.py", line 503, in build_extension

    depends=ext.depends)

  File "/usr/lib/python3.4/distutils/ccompiler.py", line 574, in compile

    self._compile(obj, src, ext, cc_args, extra_postargs, pp_opts)

  File "/usr/lib/python3.4/distutils/unixccompiler.py", line 118, in _compile

    raise CompileError(msg)

distutils.errors.CompileError: command 'arm-linux-gnueabihf-gcc' failed with exit status 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):

  File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1063, in run_setup

    run_setup(setup_script, args)

  File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 68, in run_setup

    DirectorySandbox(setup_dir).run(runner)

  File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 114, in run

    return func()

  File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 67, in runner

    _execfile(setup_script, ns)

  File "/usr/lib/python3/dist-packages/setuptools/sandbox.py", line 43, in _execfile

    exec(code, globals, locals)

  File "/tmp/easy_install-xhimgt7q/cffi-1.9.1/setup.py", line 202, in <module>for i in range(1, len(argv))):

  File "/usr/lib/python3.4/distutils/core.py", line 163, in setup

    raise SystemExit("error: " + str(msg))

SystemExit: error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1

During handling of the above exception, another exception occurred:

Traceback (most recent call last):

  File "<string>", line 1, in <module>File "/tmp/pip-build-vmqvaiw6/cryptography/setup.py", line 334, in <module>**keywords_with_side_effects(sys.argv)

  File "/usr/lib/python3.4/distutils/core.py", line 108, in setup

    _setup_distribution = dist = klass(attrs)

  File "/usr/lib/python3/dist-packages/setuptools/dist.py", line 262, in __init__

    self.fetch_build_eggs(attrs['setup_requires'])

  File "/usr/lib/python3/dist-packages/setuptools/dist.py", line 287, in fetch_build_eggs

    replace_conflicting=True,

  File "/usr/lib/python3/dist-packages/pkg_resources.py", line 631, in resolve

    dist = best[req.key] = env.best_match(req, ws, installer)

  File "/usr/lib/python3/dist-packages/pkg_resources.py", line 874, in best_match

    return self.obtain(req, installer)

  File "/usr/lib/python3/dist-packages/pkg_resources.py", line 886, in obtain

    return installer(requirement)

  File "/usr/lib/python3/dist-packages/setuptools/dist.py", line 338, in fetch_build_egg

    return cmd.easy_install(req)

  File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 636, in easy_install

    return self.install_item(spec, dist.location, tmpdir, deps)

  File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 666, in install_item

    dists = self.install_eggs(spec, download, tmpdir)

  File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 856, in install_eggs

    return self.build_and_install(setup_script, setup_base)

  File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1078, in build_and_install

    self.run_setup(setup_script, setup_base, args)

  File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1066, in run_setup

    raise DistutilsError("Setup script exited with %s" % (v.args[0],))

distutils.errors.DistutilsError: Setup script exited with error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1

----------------------------------------
Cleaning up...
Command /usr/bin/python3 -c "import setuptools, tokenize;__file__='/tmp/pip-build-vmqvaiw6/cryptography/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))" install --record /tmp/pip-d2rx3x4n-record/install-record.txt --single-version-externally-managed --compile failed with error code 1 in /tmp/pip-build-vmqvaiw6/cryptography
Storing debug log for failure in /root/.pip/pip.log
root@raspberrypi:~#</module></module></string></module></ffi.h></module></module></string></module></ffi.h>

tpr

~~@skorpil:~~

Leider auch Fehlermeldung bei Python 3:

! ````
Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 100% 389 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 389kB downloaded
Downloading/unpacking cffi>=1.4.1 (from cryptography->python-mirobo)
Downloading cffi-1.9.1.tar.gz (407kB): 407kB downloaded
Running setup.py (path:/tmp/pip-build-vmqvaiw6/cffi/setup.py) egg_info for package cffi
Package libffi was not found in the pkg-config search path.
Perhaps you should add the directory containing `libffi.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libffi' found

```` `

Die ffi headers installieren:

apt-get install libffi-dev

skorpil

Habe ich installiert. Danach erneut mirobo mit folgendem Fehlerprotokoll:

! Downloading/unpacking cffi>=1.4.1 (from cryptography->python-mirobo)
! Downloading cffi-1.9.1.tar.gz (407kB): 407kB downloaded
! Running setup.py (path:/tmp/pip-build-52nwxyku/cffi/setup.py) egg_info for package cffi
! Downloading/unpacking appdirs>=1.4.0 (from setuptools>=11.3->cryptography->python-mirobo)
! Downloading appdirs-1.4.2-py2.py3-none-any.whl
! Downloading/unpacking packaging>=16.8 (from setuptools>=11.3->cryptography->python-mirobo)
! Downloading packaging-16.8-py2.py3-none-any.whl
! Downloading/unpacking pycparser (from cffi>=1.4.1->cryptography->python-mirobo)
! Downloading pycparser-2.17.tar.gz (231kB): 231kB downloaded
! Running setup.py (path:/tmp/pip-build-52nwxyku/pycparser/setup.py) egg_info for package pycparser
! warning: no previously-included files matching 'yacctab.' found under directory 'tests'
! warning: no previously-included files matching 'lextab.' found under directory 'tests'
! warning: no previously-included files matching 'yacctab.' found under directory 'examples'
! warning: no previously-included files matching 'lextab.' found under directory 'examples'
! Downloading/unpacking pyparsing (from packaging>=16.8->setuptools>=11.3->cryptography->python-mirobo)
! Downloading pyparsing-2.1.10-py2.py3-none-any.whl (56kB): 56kB downloaded
! Installing collected packages: python-mirobo, cryptography, idna, pyasn1, setuptools, cffi, appdirs, packaging, pycparser, pyparsing
! Running setup.py install for cryptography
! Installed /tmp/pip-build-52nwxyku/cryptography/cffi-1.9.1-py3.4-linux-armv7l.egg
! Searching for pycparser
! Reading https://pypi.python.org/simple/pycparser/
! Best match: pycparser 2.17
! Downloading https://pypi.python.org/packages/be/64/ … f6af5a40c7
! Processing pycparser-2.17.tar.gz
! Writing /tmp/easy_install-uxbzzer1/pycparser-2.17/setup.cfg
! Running pycparser-2.17/setup.py -q bdist_egg --dist-dir /tmp/easy_install-uxbzzer1/pycparser-2.17/egg-dist-tmp-05lk5pnb
! warning: no previously-included files matching 'yacctab.' found under directory 'tests'
! warning: no previously-included files matching 'lextab.' found under directory 'tests'
! warning: no previously-included files matching 'yacctab.' found under directory 'examples'
! warning: no previously-included files matching 'lextab.' found under directory 'examples'
! zip_safe flag not set; analyzing archive contents...
! pycparser.ply.pycache.yacc.cpython-34: module references file
! pycparser.ply.pycache.yacc.cpython-34: module MAY be using inspect.getsourcefile
! pycparser.ply.pycache.yacc.cpython-34: module MAY be using inspect.stack
! pycparser.ply.pycache.lex.cpython-34: module references file
! pycparser.ply.pycache.lex.cpython-34: module MAY be using inspect.getsourcefile
! pycparser.ply.pycache.ygen.cpython-34: module references file
! Installed /tmp/pip-build-52nwxyku/cryptography/pycparser-2.17-py3.4.egg
! no previously-included directories found matching 'docs/_build'
! warning: no previously-included files matching '' found under directory 'vectors'
! generating cffi module 'build/temp.linux-armv7l-3.4/_padding.c'
! generating cffi module 'build/temp.linux-armv7l-3.4/_constant_time.c'
! generating cffi module 'build/temp.linux-armv7l-3.4/_openssl.c'
! building '_openssl' extension
! arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.4m -c build/temp.linux-armv7l-3.4/_openssl.c -o build/temp.linux-armv7l-3.4/build/temp.linux-armv7l-3.4/_openssl.o
! build/temp.linux-armv7l-3.4/_openssl.c:434:30: fatal error: openssl/opensslv.h: Datei oder Verzeichnis nicht gefunden
! #include <openssl opensslv.h="">^
! compilation terminated.
! error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1
! Complete output from command /usr/bin/python3 -c "import setuptools, tokenize;file='/tmp/pip-build-52nwxyku/cryptography/setup.py';exec(compile(getattr(tokenize, 'open', open)(file).read().replace('\r\n', '\n'), file, 'exec'))" install --record /tmp/pip-extnf5u5-record/install-record.txt --single-version-externally-managed --compile:
! Installed /tmp/pip-build-52nwxyku/cryptography/cffi-1.9.1-py3.4-linux-armv7l.egg
! Searching for pycparser
! Reading https://pypi.python.org/simple/pycparser/
! Best match: pycparser 2.17
! Downloading https://pypi.python.org/packages/be/64/ ... f6af5a40c7
! Processing pycparser-2.17.tar.gz
! Writing /tmp/easy_install-uxbzzer1/pycparser-2.17/setup.cfg
! Running pycparser-2.17/setup.py -q bdist_egg --dist-dir /tmp/easy_install-uxbzzer1/pycparser-2.17/egg-dist-tmp-05lk5pnb
! warning: no previously-included files matching 'yacctab.' found under directory 'tests'
! warning: no previously-included files matching 'lextab.' found under directory 'tests'
! warning: no previously-included files matching 'yacctab.' found under directory 'examples'
! warning: no previously-included files matching 'lextab.' found under directory 'examples'
! zip_safe flag not set; analyzing archive contents...
! pycparser.ply.pycache.yacc.cpython-34: module references file
! pycparser.ply.pycache.yacc.cpython-34: module MAY be using inspect.getsourcefile
! pycparser.ply.pycache.yacc.cpython-34: module MAY be using inspect.stack
! pycparser.ply.pycache.lex.cpython-34: module references file
! pycparser.ply.pycache.lex.cpython-34: module MAY be using inspect.getsourcefile
! pycparser.ply.pycache.ygen.cpython-34: module references file
! Installed /tmp/pip-build-52nwxyku/cryptography/pycparser-2.17-py3.4.egg
! running install
! running build
! running build_py
! creating build
! creating build/lib.linux-armv7l-3.4
! creating build/lib.linux-armv7l-3.4/cryptography
! copying src/cryptography/exceptions.py -> build/lib.linux-armv7l-3.4/cryptography
! copying src/cryptography/about.py -> build/lib.linux-armv7l-3.4/cryptography
! copying src/cryptography/fernet.py -> build/lib.linux-armv7l-3.4/cryptography
! copying src/cryptography/utils.py -> build/lib.linux-armv7l-3.4/cryptography
! copying src/cryptography/init.py -> build/lib.linux-armv7l-3.4/cryptography
! creating build/lib.linux-armv7l-3.4/cryptography/x509
! copying src/cryptography/x509/name.py -> build/lib.linux-armv7l-3.4/cryptography/x509
! copying src/cryptography/x509/extensions.py -> build/lib.linux-armv7l-3.4/cryptography/x509
! copying src/cryptography/x509/oid.py -> build/lib.linux-armv7l-3.4/cryptography/x509
! copying src/cryptography/x509/init.py -> build/lib.linux-armv7l-3.4/cryptography/x509
! copying src/cryptography/x509/base.py -> build/lib.linux-armv7l-3.4/cryptography/x509
! copying src/cryptography/x509/general_name.py -> build/lib.linux-armv7l-3.4/cryptography/x509
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat
! copying src/cryptography/hazmat/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives
! copying src/cryptography/hazmat/primitives/serialization.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives
! copying src/cryptography/hazmat/primitives/padding.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives
! copying src/cryptography/hazmat/primitives/cmac.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives
! copying src/cryptography/hazmat/primitives/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives
! copying src/cryptography/hazmat/primitives/keywrap.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives
! copying src/cryptography/hazmat/primitives/hashes.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives
! copying src/cryptography/hazmat/primitives/hmac.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives
! copying src/cryptography/hazmat/primitives/constant_time.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat/bindings
! copying src/cryptography/hazmat/bindings/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/bindings
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat/backends
! copying src/cryptography/hazmat/backends/multibackend.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends
! copying src/cryptography/hazmat/backends/interfaces.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends
! copying src/cryptography/hazmat/backends/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/ciphers
! copying src/cryptography/hazmat/primitives/ciphers/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/ciphers
! copying src/cryptography/hazmat/primitives/ciphers/base.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/ciphers
! copying src/cryptography/hazmat/primitives/ciphers/modes.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/ciphers
! copying src/cryptography/hazmat/primitives/ciphers/algorithms.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/ciphers
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/interfaces
! copying src/cryptography/hazmat/primitives/interfaces/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/interfaces
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/twofactor
! copying src/cryptography/hazmat/primitives/twofactor/utils.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/twofactor
! copying src/cryptography/hazmat/primitives/twofactor/hotp.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/twofactor
! copying src/cryptography/hazmat/primitives/twofactor/totp.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/twofactor
! copying src/cryptography/hazmat/primitives/twofactor/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/twofactor
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/asymmetric
! copying src/cryptography/hazmat/primitives/asymmetric/dh.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/asymmetric
! copying src/cryptography/hazmat/primitives/asymmetric/utils.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/asymmetric
! copying src/cryptography/hazmat/primitives/asymmetric/rsa.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/asymmetric
! copying src/cryptography/hazmat/primitives/asymmetric/dsa.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/asymmetric
! copying src/cryptography/hazmat/primitives/asymmetric/padding.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/asymmetric
! copying src/cryptography/hazmat/primitives/asymmetric/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/asymmetric
! copying src/cryptography/hazmat/primitives/asymmetric/ec.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/asymmetric
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/kdf
! copying src/cryptography/hazmat/primitives/kdf/hkdf.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/kdf
! copying src/cryptography/hazmat/primitives/kdf/concatkdf.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/kdf
! copying src/cryptography/hazmat/primitives/kdf/pbkdf2.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/kdf
! copying src/cryptography/hazmat/primitives/kdf/x963kdf.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/kdf
! copying src/cryptography/hazmat/primitives/kdf/scrypt.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/kdf
! copying src/cryptography/hazmat/primitives/kdf/kbkdf.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/kdf
! copying src/cryptography/hazmat/primitives/kdf/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/primitives/kdf
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat/bindings/commoncrypto
! copying src/cryptography/hazmat/bindings/commoncrypto/binding.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/bindings/commoncrypto
! copying src/cryptography/hazmat/bindings/commoncrypto/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/bindings/commoncrypto
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat/bindings/openssl
! copying src/cryptography/hazmat/bindings/openssl/binding.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/bindings/openssl
! copying src/cryptography/hazmat/bindings/openssl/_conditional.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/bindings/openssl
! copying src/cryptography/hazmat/bindings/openssl/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/bindings/openssl
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/commoncrypto
! copying src/cryptography/hazmat/backends/commoncrypto/ciphers.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/commoncrypto
! copying src/cryptography/hazmat/backends/commoncrypto/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/commoncrypto
! copying src/cryptography/hazmat/backends/commoncrypto/backend.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/commoncrypto
! copying src/cryptography/hazmat/backends/commoncrypto/hashes.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/commoncrypto
! copying src/cryptography/hazmat/backends/commoncrypto/hmac.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/commoncrypto
! creating build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/dh.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/decode_asn1.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/utils.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/rsa.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/ciphers.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/dsa.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/cmac.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/init.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/encode_asn1.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/backend.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/hashes.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/x509.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/hmac.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! copying src/cryptography/hazmat/backends/openssl/ec.py -> build/lib.linux-armv7l-3.4/cryptography/hazmat/backends/openssl
! running egg_info
! writing dependency_links to src/cryptography.egg-info/dependency_links.txt
! writing top-level names to src/cryptography.egg-info/top_level.txt
! writing src/cryptography.egg-info/PKG-INFO
! writing entry points to src/cryptography.egg-info/entry_points.txt
! writing requirements to src/cryptography.egg-info/requires.txt
! warning: manifest_maker: standard file '-c' not found
! reading manifest file 'src/cryptography.egg-info/SOURCES.txt'
! reading manifest template 'MANIFEST.in'
! no previously-included directories found matching 'docs/_build'
! warning: no previously-included files matching '' found under directory 'vectors'
! writing manifest file 'src/cryptography.egg-info/SOURCES.txt'
! running build_ext
! generating cffi module 'build/temp.linux-armv7l-3.4/_padding.c'
! creating build/temp.linux-armv7l-3.4
! generating cffi module 'build/temp.linux-armv7l-3.4/_constant_time.c'
! generating cffi module 'build/temp.linux-armv7l-3.4/_openssl.c'
! building '_openssl' extension
! creating build/temp.linux-armv7l-3.4/build
! creating build/temp.linux-armv7l-3.4/build/temp.linux-armv7l-3.4
! arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.4m -c build/temp.linux-armv7l-3.4/_openssl.c -o build/temp.linux-armv7l-3.4/build/temp.linux-armv7l-3.4/_openssl.o
! build/temp.linux-armv7l-3.4/_openssl.c:434:30: fatal error: openssl/opensslv.h: Datei oder Verzeichnis nicht gefunden
! #include <openssl opensslv.h="">^
! compilation terminated.
! error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1
! ----------------------------------------
! Cleaning up...
! Command /usr/bin/python3 -c "import setuptools, tokenize;file='/tmp/pip-build-52nwxyku/cryptography/setup.py';exec(compile(getattr(tokenize, 'open', open)(file).read().replace('\r\n', '\n'), file, 'exec'))" install --record /tmp/pip-extnf5u5-record/install-record.txt --single-version-externally-managed --compile failed with error code 1 in /tmp/pip-build-52nwxyku/cryptography
! Storing debug log for failure in /root/.pip/pip.log</openssl></openssl>

tpr

~~@skorpil:~~

! build/temp.linux-armv7l-3.4/_openssl.c:434:30: fatal error: openssl/opensslv.h: Datei oder Verzeichnis nicht gefunden
! #include <openssl opensslv.h="">^
! compilation terminated.</openssl> `
Jetzt fehlt noch libssl-dev.

skorpil

Steht ja in github. Ich bin zu doof zum Lesen. Dennoch habe ich jetzt wieder eine Fehlermeldung:

! root@raspberrypi:~# apt-get install libssl-dev
! Paketlisten werden gelesen… Fertig
! Abhängigkeitsbaum wird aufgebaut.
! Statusinformationen werden eingelesen.... Fertig
! Die folgenden zusätzlichen Pakete werden installiert:
! libssl-doc
! Die folgenden NEUEN Pakete werden installiert:
! libssl-dev libssl-doc
! 0 aktualisiert, 2 neu installiert, 0 zu entfernen und 3 nicht aktualisiert.
! Es müssen 2.263 kB an Archiven heruntergeladen werden.
! Nach dieser Operation werden 6.480 kB Plattenplatz zusätzlich benutzt.
! Möchten Sie fortfahren? [J/n] j
! Holen: 1 http://mirrordirector.raspbian.org/raspbian/ jessie/main libssl-dev armhf 1.0.1t-1+deb8u6 [1.095 kB]
! Holen: 2 http://mirrordirector.raspbian.org/raspbian/ jessie/main libssl-doc all 1.0.1t-1+deb8u6 [1.168 kB]
! Es wurden 2.263 kB in 2 s geholt (1.081 kB/s).
! Vormals nicht ausgewähltes Paket libssl-dev:armhf wird gewählt.
! (Lese Datenbank … 118246 Dateien und Verzeichnisse sind derzeit installiert.)
! Vorbereitung zum Entpacken von .../libssl-dev_1.0.1t-1+deb8u6_armhf.deb ...
! Entpacken von libssl-dev:armhf (1.0.1t-1+deb8u6) ...
! Vormals nicht ausgewähltes Paket libssl-doc wird gewählt.
! Vorbereitung zum Entpacken von .../libssl-doc_1.0.1t-1+deb8u6_all.deb ...
! Entpacken von libssl-doc (1.0.1t-1+deb8u6) ...
! Trigger für man-db (2.7.0.2-5) werden verarbeitet ...
! libssl-dev:armhf (1.0.1t-1+deb8u6) wird eingerichtet ...
! libssl-doc (1.0.1t-1+deb8u6) wird eingerichtet ...
! root@raspberrypi:~# pip3 install python-mirobo
! Downloading/unpacking python-mirobo
! Downloading python_mirobo-0.0.3-py3-none-any.whl
! Requirement already satisfied (use --upgrade to upgrade): construct in /usr/local/lib/python3.4/dist-packages (from python-mirobo)
! Downloading/unpacking cryptography (from python-mirobo)
! Downloading cryptography-1.7.2.tar.gz (420kB): 420kB downloaded
! Running setup.py (path:/tmp/pip-build-0ccwl8vj/cryptography/setup.py) egg_info for package cryptography
! no previously-included directories found matching 'docs/_build'
! warning: no previously-included files matching '' found under directory 'vectors'
! Requirement already satisfied (use --upgrade to upgrade): pretty-cron in /usr/local/lib/python3.4/dist-packages (from python-mirobo)
! Requirement already satisfied (use --upgrade to upgrade): click in /usr/local/lib/python3.4/dist-packages (from python-mirobo)
! Downloading/unpacking idna>=2.0 (from cryptography->python-mirobo)
! Downloading idna-2.4-py2.py3-none-any.whl (55kB): 55kB downloaded
! Downloading/unpacking pyasn1>=0.1.8 (from cryptography->python-mirobo)
! Downloading pyasn1-0.2.3-py2.py3-none-any.whl (53kB): 53kB downloadedRequirement already satisfied (use --upgrade to upgrade): six>=1.4.1 in /usr/lib/python3/dist-packages (from cryptography->python-mirobo)
! Downloading/unpacking setuptools>=11.3 (from cryptography->python-mirobo)
! Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 1% 4.1 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 2% 8.2 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 3% 12k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 4% 16k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 5% 20k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 6% 24k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 7% 28k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 8% 32k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 9% 36k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 10% 40k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 11% 45k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 12% 49k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 13% 53k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 14% 57k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 15% 61k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 16% 65k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 17% 69k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 18% 73k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 19% 77k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 21% 81k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 22% 86k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 23% 90k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 24% 94k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 25% 98k Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 26% 102 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 27% 106 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 28% 110 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 29% 114 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 30% 118 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 31% 122 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 32% 126 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 33% 131 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 34% 135 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 35% 139 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 36% 143 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 37% 147 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 38% 151 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 39% 155 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 41% 159 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 42% 163 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 43% 167 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 44% 172 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 45% 176 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 46% 180 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 47% 184 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 48% 188 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 49% 192 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 50% 196 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 51% 200 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 52% 204 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 53% 208 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 54% 212 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 55% 217 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 56% 221 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 57% 225 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 58% 229 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 59% 233 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 61% 237 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 62% 241 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 63% 245 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 64% 249 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 65% 253 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 66% 258 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 67% 262 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 68% 266 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 69% 270 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 70% 274 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 71% 278 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 72% 282 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 73% 286 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 74% 290 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 75% 294 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 76% 299 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 77% 303 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 78% 307 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 79% 311 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 80% 315 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 82% 319 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 83% 323 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 84% 327 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 85% 331 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 86% 335 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 87% 339 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 88% 344 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 89% 348 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 90% 352 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 91% 356 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 92% 360 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 93% 364 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 94% 368 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 95% 372 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 96% 376 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 97% 380 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 98% 385 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 99% 389 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 100% 389 Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): Downloading setuptools-34.3.1-py2.py3-none-any.whl (389kB): 389kB downloaded
! Downloading/unpacking cffi>=1.4.1 (from cryptography->python-mirobo)
! Downloading cffi-1.9.1.tar.gz (407kB): 407kB downloaded
! Running setup.py (path:/tmp/pip-build-0ccwl8vj/cffi/setup.py) egg_info for package cffi
! Downloading/unpacking appdirs>=1.4.0 (from setuptools>=11.3->cryptography->python-mirobo)
! Downloading appdirs-1.4.2-py2.py3-none-any.whl
! Downloading/unpacking packaging>=16.8 (from setuptools>=11.3->cryptography->python-mirobo)
! Downloading packaging-16.8-py2.py3-none-any.whl
! Downloading/unpacking pycparser (from cffi>=1.4.1->cryptography->python-mirobo)
! Downloading pycparser-2.17.tar.gz (231kB): 231kB downloaded
! Running setup.py (path:/tmp/pip-build-0ccwl8vj/pycparser/setup.py) egg_info for package pycparser
! warning: no previously-included files matching 'yacctab.' found under directory 'tests'
! warning: no previously-included files matching 'lextab.' found under directory 'tests'
! warning: no previously-included files matching 'yacctab.' found under directory 'examples'
! warning: no previously-included files matching 'lextab.' found under directory 'examples'
! Downloading/unpacking pyparsing (from packaging>=16.8->setuptools>=11.3->cryptography->python-mirobo)
! Downloading pyparsing-2.1.10-py2.py3-none-any.whl (56kB): 56kB downloaded
! Installing collected packages: python-mirobo, cryptography, idna, pyasn1, setuptools, cffi, appdirs, packaging, pycparser, pyparsing
! Running setup.py install for cryptography
! Installed /tmp/pip-build-0ccwl8vj/cryptography/cffi-1.9.1-py3.4-linux-armv7l.egg
! Searching for pycparser
! Reading https://pypi.python.org/simple/pycparser/
! Best match: pycparser 2.17
! Downloading https://pypi.python.org/packages/be/64/ ... f6af5a40c7
! Processing pycparser-2.17.tar.gz
! Writing /tmp/easy_install-p_x9avyu/pycparser-2.17/setup.cfg
! Running pycparser-2.17/setup.py -q bdist_egg --dist-dir /tmp/easy_install-p_x9avyu/pycparser-2.17/egg-dist-tmp-ketmxj32
! warning: no previously-included files matching 'yacctab.' found under directory 'tests'
! warning: no previously-included files matching 'lextab.' found under directory 'tests'
! warning: no previously-included files matching 'yacctab.' found under directory 'examples'
! warning: no previously-included files matching 'lextab.' found under directory 'examples'
! zip_safe flag not set; analyzing archive contents...
! pycparser.ply.pycache.yacc.cpython-34: module references file
! pycparser.ply.pycache.yacc.cpython-34: module MAY be using inspect.getsourcefile
! pycparser.ply.pycache.yacc.cpython-34: module MAY be using inspect.stack
! pycparser.ply.pycache.lex.cpython-34: module references file
! pycparser.ply.pycache.lex.cpython-34: module MAY be using inspect.getsourcefile
! pycparser.ply.pycache.ygen.cpython-34: module references file
! Installed /tmp/pip-build-0ccwl8vj/cryptography/pycparser-2.17-py3.4.egg
! no previously-included directories found matching 'docs/_build'
! warning: no previously-included files matching '' found under directory 'vectors'
! generating cffi module 'build/temp.linux-armv7l-3.4/_padding.c'
! generating cffi module 'build/temp.linux-armv7l-3.4/_constant_time.c'
! generating cffi module 'build/temp.linux-armv7l-3.4/_openssl.c'
! building '_openssl' extension
! arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.4m -c build/temp.linux-armv7l-3.4/_openssl.c -o build/temp.linux-armv7l-3.4/build/temp.linux-armv7l-3.4/_openssl.o
! arm-linux-gnueabihf-gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -Wl,-z,relro -g -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 build/temp.linux-armv7l-3.4/build/temp.linux-armv7l-3.4/_openssl.o -lssl -lcrypto -o build/lib.linux-armv7l-3.4/cryptography/hazmat/bindings/_openssl.cpython-34m.so
! building '_constant_time' extension
! arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.4m -c build/temp.linux-armv7l-3.4/_constant_time.c -o build/temp.linux-armv7l-3.4/build/temp.linux-armv7l-3.4/_constant_time.o
! arm-linux-gnueabihf-gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -Wl,-z,relro -g -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 build/temp.linux-armv7l-3.4/build/temp.linux-armv7l-3.4/_constant_time.o -o build/lib.linux-armv7l-3.4/cryptography/hazmat/bindings/_constant_time.cpython-34m.so
! building '_padding' extension
! arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -g -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/python3.4m -c build/temp.linux-armv7l-3.4/_padding.c -o build/temp.linux-armv7l-3.4/build/temp.linux-armv7l-3.4/_padding.o
! arm-linux-gnueabihf-gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -Wl,-z,relro -g -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 build/temp.linux-armv7l-3.4/build/temp.linux-armv7l-3.4/_padding.o -o build/lib.linux-armv7l-3.4/cryptography/hazmat/bindings/_padding.cpython-34m.so
! Found existing installation: setuptools 5.5.1
! Not uninstalling setuptools at /usr/lib/python3/dist-packages, owned by OS
! Running setup.py install for cffi
! Traceback (most recent call last):
! File "<string>", line 1, in <module>File "/usr/local/lib/python3.4/dist-packages/setuptools/init.py", line 12, in <module>import setuptools.version
! File "/usr/local/lib/python3.4/dist-packages/setuptools/version.py", line 1, in <module>import pkg_resources
! File "/usr/local/lib/python3.4/dist-packages/pkg_resources/init.py", line 70, in <module>import packaging.version
! ImportError: No module named 'packaging'
! Complete output from command /usr/bin/python3 -c "import setuptools, tokenize;file='/tmp/pip-build-0ccwl8vj/cffi/setup.py';exec(compile(getattr(tokenize, 'open', open)(file).read().replace('\r\n', '\n'), file, 'exec'))" install --record /tmp/pip-uoxfec1w-record/install-record.txt --single-version-externally-managed --compile:
! Traceback (most recent call last):
! File "<string>", line 1, in <module>File "/usr/local/lib/python3.4/dist-packages/setuptools/init.py", line 12, in <module>import setuptools.version
! File "/usr/local/lib/python3.4/dist-packages/setuptools/version.py", line 1, in <module>import pkg_resources
! File "/usr/local/lib/python3.4/dist-packages/pkg_resources/init.py", line 70, in <module>import packaging.version
! ImportError: No module named 'packaging'
! ----------------------------------------
! Cleaning up...
! Command /usr/bin/python3 -c "import setuptools, tokenize;file='/tmp/pip-build-0ccwl8vj/cffi/setup.py';exec(compile(getattr(tokenize, 'open', open)(file).read().replace('\r\n', '\n'), file, 'exec'))" install --record /tmp/pip-uoxfec1w-record/install-record.txt --single-version-externally-managed --compile failed with error code 1 in /tmp/pip-build-0ccwl8vj/cffi
! Storing debug log for failure in /r</module></module></module></module></string></module></module></module></module></string>

tpr

~~@skorpil:~~

Steht ja in github. Ich bin zu doof zum Lesen. `
Bist du nicht, ich habe es nur schnell aktualisiert ;)

> ImportError: No module named 'packaging'
Dies ist komplizierter, anscheinbar ist mein eigenes System irgendwie anders eingerichtet, sodass es funktioniert. Ich könnte dieses Problem auch jetzt bei mir wiedergeben, eine Lösung habe ich noch nicht gefunden. :(

tpr

> ImportError: No module named 'packaging'
Das Problem habe ich gefunden, es geht um zu alten Versionen von pip & setuptools, ich habe die README.md aktualisiert.

$ virtualenv -p python3 miroboenv
..
$ source miroboenv/bin/activate
..
$ pip3 install -U pip setuptools
..
$ pip install python-mirobo
..
$ mirobo
State: Charging
Battery: 100
Fanspeed: 30
Cleaning since: 0:00:00
Cleaned area: 1.6925 m²

Danke für das Testen :)

skorpil

My pleasure! Aber testen kann ich erst morgen wieder. Ich werde berichten.

skorpil

Tpr,

So, weiter getestet wie versprochen. Ich bekomme noch immer Fehler.

1. starte ich````
pip3 install -U pip setuptools


>! Traceback (most recent call last):
>! File "/usr/bin/pip3", line 5, in <module>from pkg_resources import load_entry_point
>! File "/usr/local/lib/python3.4/dist-packages/pkg_resources/__init__.py", line 70, in <module>import packaging.version
>! ImportError: No module named 'packaging'</module></module>

2\. starte ich````
pip3 install python-mirobo

kommt

! root@raspberrypi:~# pip3 install python-mirobo
! Traceback (most recent call last):
! File "/usr/bin/pip3", line 5, in <module>from pkg_resources import load_entry_point
! File "/usr/local/lib/python3.4/dist-packages/pkg_resources/init.py", line 70, in <module>import packaging.version
! ImportError: No module named 'packaging'</module></module>

Irgendwo ist noch der Hund drin :) :D

tpr

Ohh, hmh. Nun, einzelne was ich nachdenken kann wäre das ganze pip manuell erneut installieren wie hier: https://raspberrypi.stackexchange.com/q … 2413#62413 (ohne paramiko zeile)

Meistertr

Hat schon jemand erfolg mit der Umsetzung in Javascript ?

gst666

Die eigentliche Routine habe ich bereits nach Javascript umgeschrieben und scheint zu funktionieren. Jetzt muss ich das Ganze in einen Adapter umschreiben. Da ich hiermit noch keinerlei Erfahrungen habe, wird das etwas dauern. Mal sehen, was das nächste Wochenende bringt.

mc-hollin

Kannst du die Umsetzung in Javascript schon mal hier bereit stellen?

:D

bahnuhr

~~@mc-hollin:~~

Kannst du die Umsetzung in Javascript schon mal hier bereit stellen?

:D `

Ja, das wäre toll.

Dann können wir ja schon einmal testen.

mfg

Community Forum

NEWS

[Frage] Xiaomi Vacuum cleaner

Support us

529

32.5k

81.7k

1.3m