Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. Tester
  4. ZigBee neue Version 1.4.4

NEWS

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    8.6k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    2.1k

  • Neues Video "KI im Smart Home" - ioBroker plus n8n
    BluefoxB
    Bluefox
    16
    1
    2.9k

ZigBee neue Version 1.4.4

Geplant Angeheftet Gesperrt Verschoben Tester
neue versionzigbeezigbee neue version 1.4.0
302 Beiträge 35 Kommentatoren 56.8k Aufrufe 36 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • K klassisch

    Hatte heute einen seltsamen Effekt: Beim Betrachten der Vernetzungskarte binkte ein Synfonisk rotary encoder ständig Dauerfeuer. Wie ein bubbling idiot.
    Auch die Objekte wurden ständig aktualisiert.
    Drehen am encode hat nichts geändert.
    Nach Neustart des Adapters war Ruhe.
    Im log habe ich nichts Verdächtiges gefunden.

    K Offline
    K Offline
    klassisch
    Most Active
    schrieb am zuletzt editiert von
    #165

    @klassisch sagte in ZigBee neue Version 1.4.4:

    Hatte heute einen seltsamen Effekt: Beim Betrachten der Vernetzungskarte binkte ein Synfonisk rotary encoder ständig Dauerfeuer. Wie ein bubbling idiot.
    Auch die Objekte wurden ständig aktualisiert.
    Drehen am encode hat nichts geändert.
    Nach Neustart des Adapters war Ruhe.
    Im log habe ich nichts Verdächtiges gefunden.

    Heute Nacht wieder, aber diesmal pwer History aufgezeichnet.
    738e6d58-2d49-4ac2-a941-656f01d37426-grafik.png

    Etwa zwischen 20:00 und 04:00 freie Oszillation. Nach Adapter Restart war Ruhe. Dennoch war das Netz noch nicht in Ordnung. Der Opple Schalter neben dem rotary encoder für dieses Panel funktionierte nicht mehr.
    Das zugehörige Panel auch nur sporadisch erreichbar.

    Nach Neuinstallation Adapter war wieder alles in Ordnung.

    Wollte probeweise die Version 1.3 installieren. Aber die scheint es nicht mehr zu geben?

    Das zu diesem encoder gehörige history file hat für gestern 18 MByte
    Hier mal ein kleiner Auszug aus dem History file:

    {
        "val": true,
        "ack": 1,
        "ts": 1614806839486,
        "q": 0,
        "from": "system.adapter.zigbee.0",
        "user": "system.user.admin"
      },
      {
        "val": false,
        "ack": 1,
        "ts": 1614806839581,
        "q": 0,
        "from": "system.adapter.zigbee.0",
        "user": "system.user.admin"
      },
      {
        "val": true,
        "ack": 1,
        "ts": 1614806839690,
        "q": 0,
        "from": "system.adapter.zigbee.0",
        "user": "system.user.admin"
      },
      {
        "val": false,
        "ack": 1,
        "ts": 1614806839795,
        "q": 0,
        "from": "system.adapter.zigbee.0",
        "user": "system.user.admin"
      },
      {
        "val": true,
        "ack": 1,
        "ts": 1614806839894,
        "q": 0,
        "from": "system.adapter.zigbee.0",
        "user": "system.user.admin"
      },
    

    Oszillator mit Periode von ca. 0.2 Sekunden.

    In diesem Zeibereich keine Warnmeldungen oder Fehlermeldungen des zigbee Adapters im log.

    AsgothianA 1 Antwort Letzte Antwort
    0
    • K klassisch

      @klassisch sagte in ZigBee neue Version 1.4.4:

      Hatte heute einen seltsamen Effekt: Beim Betrachten der Vernetzungskarte binkte ein Synfonisk rotary encoder ständig Dauerfeuer. Wie ein bubbling idiot.
      Auch die Objekte wurden ständig aktualisiert.
      Drehen am encode hat nichts geändert.
      Nach Neustart des Adapters war Ruhe.
      Im log habe ich nichts Verdächtiges gefunden.

      Heute Nacht wieder, aber diesmal pwer History aufgezeichnet.
      738e6d58-2d49-4ac2-a941-656f01d37426-grafik.png

      Etwa zwischen 20:00 und 04:00 freie Oszillation. Nach Adapter Restart war Ruhe. Dennoch war das Netz noch nicht in Ordnung. Der Opple Schalter neben dem rotary encoder für dieses Panel funktionierte nicht mehr.
      Das zugehörige Panel auch nur sporadisch erreichbar.

      Nach Neuinstallation Adapter war wieder alles in Ordnung.

      Wollte probeweise die Version 1.3 installieren. Aber die scheint es nicht mehr zu geben?

      Das zu diesem encoder gehörige history file hat für gestern 18 MByte
      Hier mal ein kleiner Auszug aus dem History file:

      {
          "val": true,
          "ack": 1,
          "ts": 1614806839486,
          "q": 0,
          "from": "system.adapter.zigbee.0",
          "user": "system.user.admin"
        },
        {
          "val": false,
          "ack": 1,
          "ts": 1614806839581,
          "q": 0,
          "from": "system.adapter.zigbee.0",
          "user": "system.user.admin"
        },
        {
          "val": true,
          "ack": 1,
          "ts": 1614806839690,
          "q": 0,
          "from": "system.adapter.zigbee.0",
          "user": "system.user.admin"
        },
        {
          "val": false,
          "ack": 1,
          "ts": 1614806839795,
          "q": 0,
          "from": "system.adapter.zigbee.0",
          "user": "system.user.admin"
        },
        {
          "val": true,
          "ack": 1,
          "ts": 1614806839894,
          "q": 0,
          "from": "system.adapter.zigbee.0",
          "user": "system.user.admin"
        },
      

      Oszillator mit Periode von ca. 0.2 Sekunden.

      In diesem Zeibereich keine Warnmeldungen oder Fehlermeldungen des zigbee Adapters im log.

      AsgothianA Offline
      AsgothianA Offline
      Asgothian
      Developer
      schrieb am zuletzt editiert von
      #166

      @klassisch sagte in ZigBee neue Version 1.4.4:

      In diesem Zeibereich keine Warnmeldungen oder Fehlermeldungen des zigbee Adapters im log.

      Bitte versuch das folgende:

      • Installiere die 1.4.5 von Github
      • Trage die IEEE des Controllers (Ohne "0x") in den neu vorhandenen State "zigbee.0.info.debugmessages" ein
      • lass es laufen.

      Wenn der Controller wieder dieses Verhalten zeigt prüf das Log auf "warn" Meldungen mit dem Schlüsselwort "ELEVATED"

      Ich gehe im Moment davon aus das

      • der Controller eine Macke hat die das Verhalten auslöst
      • beim Start des Adapters der Controller eine "configure" Meldung bekommt die dieses Verhalten zunächst einmal beendet.

      A.

      ioBroker auf RPi4 - Hardware soweit wie möglich via Zigbee.
      "Shit don't work" ist keine Fehlermeldung, sondern ein Fluch.

      K 1 Antwort Letzte Antwort
      1
      • AsgothianA Asgothian

        @klassisch sagte in ZigBee neue Version 1.4.4:

        In diesem Zeibereich keine Warnmeldungen oder Fehlermeldungen des zigbee Adapters im log.

        Bitte versuch das folgende:

        • Installiere die 1.4.5 von Github
        • Trage die IEEE des Controllers (Ohne "0x") in den neu vorhandenen State "zigbee.0.info.debugmessages" ein
        • lass es laufen.

        Wenn der Controller wieder dieses Verhalten zeigt prüf das Log auf "warn" Meldungen mit dem Schlüsselwort "ELEVATED"

        Ich gehe im Moment davon aus das

        • der Controller eine Macke hat die das Verhalten auslöst
        • beim Start des Adapters der Controller eine "configure" Meldung bekommt die dieses Verhalten zunächst einmal beendet.

        A.

        K Offline
        K Offline
        klassisch
        Most Active
        schrieb am zuletzt editiert von
        #167

        @asgothian sagte in ZigBee neue Version 1.4.4:

        • Installiere die 1.4.5 von Github

        gemacht

        • Trage die IEEE des Controllers (Ohne "0x") in den neu vorhandenen State "zigbee.0.info.debugmessages" ein

        das ist die Nummer, die bei mousover über den Controller bei der Kartenansicht erscheint?

        • lass es laufen.

        gemacht. Ohne Adapter-Neustart?

        VielenDank!

        AsgothianA 1 Antwort Letzte Antwort
        0
        • K klassisch

          @asgothian sagte in ZigBee neue Version 1.4.4:

          • Installiere die 1.4.5 von Github

          gemacht

          • Trage die IEEE des Controllers (Ohne "0x") in den neu vorhandenen State "zigbee.0.info.debugmessages" ein

          das ist die Nummer, die bei mousover über den Controller bei der Kartenansicht erscheint?

          • lass es laufen.

          gemacht. Ohne Adapter-Neustart?

          VielenDank!

          AsgothianA Offline
          AsgothianA Offline
          Asgothian
          Developer
          schrieb am zuletzt editiert von
          #168

          @klassisch Ohne Neustart ist gut. Bitte bei der ieee Addresse kein 0x mit angeben.

          A.

          ioBroker auf RPi4 - Hardware soweit wie möglich via Zigbee.
          "Shit don't work" ist keine Fehlermeldung, sondern ein Fluch.

          K 1 Antwort Letzte Antwort
          0
          • AsgothianA Asgothian

            @klassisch Ohne Neustart ist gut. Bitte bei der ieee Addresse kein 0x mit angeben.

            A.

            K Offline
            K Offline
            klassisch
            Most Active
            schrieb am zuletzt editiert von
            #169

            @asgothian Danke, 0x ist nicht davor, aber führende Nullen. Format:

            00124B0008c12345
            
            AsgothianA 1 Antwort Letzte Antwort
            0
            • K klassisch

              @asgothian Danke, 0x ist nicht davor, aber führende Nullen. Format:

              00124B0008c12345
              
              AsgothianA Offline
              AsgothianA Offline
              Asgothian
              Developer
              schrieb am zuletzt editiert von
              #170

              @klassisch Das ist ok

              Wenn du den Controller jetzt drehst sollten schon Meldungen im Log auftauchen.

              A.

              ioBroker auf RPi4 - Hardware soweit wie möglich via Zigbee.
              "Shit don't work" ist keine Fehlermeldung, sondern ein Fluch.

              K 1 Antwort Letzte Antwort
              0
              • AsgothianA Asgothian

                @klassisch Das ist ok

                Wenn du den Controller jetzt drehst sollten schon Meldungen im Log auftauchen.

                A.

                K Offline
                K Offline
                klassisch
                Most Active
                schrieb am zuletzt editiert von klassisch
                #171

                @asgothian Danke, stopp, gut daß wir drüber gesprochen haben. Als ich Controller las, dachte ich an den Coordinator, habe das Drehgestell aus dem Datenpunkt rausgenommen und dann diese Nummer des Coordinators reingenommen.
                Also ich trage jetzt die Nummer des ikea symfonisk Drehreglers rotary encoders ein. Die ist schnell gefunden und steht ja in der Objektliste.
                Neue Energizer Batterie hatte ich gestern schon reingemacht. 3.13V sollte noch iO sein.
                Und ja, beim Drehen kommen ELEVATED log-Einträge. Sieht in meinem laienhaften Auge ziemlich plausibel aus.

                1 Antwort Letzte Antwort
                0
                • Jan FiedlerJ Offline
                  Jan FiedlerJ Offline
                  Jan Fiedler
                  schrieb am zuletzt editiert von
                  #172

                  Moin zusammen,

                  ich habe heute mit der beschriebenen Methode sowohl den JS-Controller als auch alle Adapter auf die aktuellste Version aktualisiert. Danach ging erstmal der Zigbee Adapter nicht mehr (v1.4.4). Mit einem Fehler bzgl Serialport. Ich habe dann Serialport mit npm aktualisiert; danach kommt jetzt folgender Fehler beim Start des Adapters - jetzt bin ich überfragt.
                  Ein npm rebuild hat auch nichts gebracht...

                  host.raspberrypi	2021-03-04 22:00:47.143	error	instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
                  host.raspberrypi	2021-03-04 22:00:47.142	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/index.js:14:22)
                  host.raspberrypi	2021-03-04 22:00:47.142	error	Caught by controller[0]: at require (internal/modules/cjs/helpers.js:25:18)
                  host.raspberrypi	2021-03-04 22:00:47.142	error	Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:692:17)
                  host.raspberrypi	2021-03-04 22:00:47.142	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:585:3)
                  host.raspberrypi	2021-03-04 22:00:47.141	error	Caught by controller[0]: at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
                  host.raspberrypi	2021-03-04 22:00:47.141	error	Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32)
                  host.raspberrypi	2021-03-04 22:00:47.141	error	Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
                  host.raspberrypi	2021-03-04 22:00:47.140	error	Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:778:30)
                  host.raspberrypi	2021-03-04 22:00:47.140	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/linux.js:2:36)
                  host.raspberrypi	2021-03-04 22:00:47.140	error	Caught by controller[0]: at bindings (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:126:9)
                  host.raspberrypi	2021-03-04 22:00:47.140	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/binding/node-v64-linux-arm/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.139	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/addon-build/default/install-root/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.139	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/addon-build/debug/install-root/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.139	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/addon-build/release/install-root/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.139	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/compiled/10.22.0/linux/arm/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.138	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/default/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.138	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/Release/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.138	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/out/Release/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.138	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/Debug/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.137	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/out/Debug/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.137	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/Release/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.137	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/Debug/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.137	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/bindings.node
                  host.raspberrypi	2021-03-04 22:00:47.136	error	Caught by controller[0]: Error: Could not locate the bindings file. Tried:
                  host.raspberrypi	2021-03-04 22:00:47.136	error	Caught by controller[0]: ^
                  host.raspberrypi	2021-03-04 22:00:47.136	error	Caught by controller[0]: throw err;
                  host.raspberrypi	2021-03-04 22:00:47.135	error	Caught by controller[0]: /opt/iobroker/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:135
                  
                  AsgothianA 1 Antwort Letzte Antwort
                  0
                  • Jan FiedlerJ Jan Fiedler

                    Moin zusammen,

                    ich habe heute mit der beschriebenen Methode sowohl den JS-Controller als auch alle Adapter auf die aktuellste Version aktualisiert. Danach ging erstmal der Zigbee Adapter nicht mehr (v1.4.4). Mit einem Fehler bzgl Serialport. Ich habe dann Serialport mit npm aktualisiert; danach kommt jetzt folgender Fehler beim Start des Adapters - jetzt bin ich überfragt.
                    Ein npm rebuild hat auch nichts gebracht...

                    host.raspberrypi	2021-03-04 22:00:47.143	error	instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
                    host.raspberrypi	2021-03-04 22:00:47.142	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/index.js:14:22)
                    host.raspberrypi	2021-03-04 22:00:47.142	error	Caught by controller[0]: at require (internal/modules/cjs/helpers.js:25:18)
                    host.raspberrypi	2021-03-04 22:00:47.142	error	Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:692:17)
                    host.raspberrypi	2021-03-04 22:00:47.142	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:585:3)
                    host.raspberrypi	2021-03-04 22:00:47.141	error	Caught by controller[0]: at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
                    host.raspberrypi	2021-03-04 22:00:47.141	error	Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32)
                    host.raspberrypi	2021-03-04 22:00:47.141	error	Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
                    host.raspberrypi	2021-03-04 22:00:47.140	error	Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:778:30)
                    host.raspberrypi	2021-03-04 22:00:47.140	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/linux.js:2:36)
                    host.raspberrypi	2021-03-04 22:00:47.140	error	Caught by controller[0]: at bindings (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:126:9)
                    host.raspberrypi	2021-03-04 22:00:47.140	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/binding/node-v64-linux-arm/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.139	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/addon-build/default/install-root/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.139	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/addon-build/debug/install-root/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.139	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/addon-build/release/install-root/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.139	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/compiled/10.22.0/linux/arm/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.138	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/default/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.138	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/Release/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.138	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/out/Release/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.138	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/Debug/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.137	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/out/Debug/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.137	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/Release/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.137	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/Debug/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.137	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/bindings.node
                    host.raspberrypi	2021-03-04 22:00:47.136	error	Caught by controller[0]: Error: Could not locate the bindings file. Tried:
                    host.raspberrypi	2021-03-04 22:00:47.136	error	Caught by controller[0]: ^
                    host.raspberrypi	2021-03-04 22:00:47.136	error	Caught by controller[0]: throw err;
                    host.raspberrypi	2021-03-04 22:00:47.135	error	Caught by controller[0]: /opt/iobroker/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:135
                    
                    AsgothianA Offline
                    AsgothianA Offline
                    Asgothian
                    Developer
                    schrieb am zuletzt editiert von
                    #173

                    @jan-fiedler Bitte den Adapter noch einmal installieren, und zwar vom Admin aus, nicht aus der Konsole.

                    A.

                    ioBroker auf RPi4 - Hardware soweit wie möglich via Zigbee.
                    "Shit don't work" ist keine Fehlermeldung, sondern ein Fluch.

                    Jan FiedlerJ 1 Antwort Letzte Antwort
                    0
                    • AsgothianA Asgothian

                      @jan-fiedler Bitte den Adapter noch einmal installieren, und zwar vom Admin aus, nicht aus der Konsole.

                      A.

                      Jan FiedlerJ Offline
                      Jan FiedlerJ Offline
                      Jan Fiedler
                      schrieb am zuletzt editiert von
                      #174

                      @asgothian Hat leider nicht geholfen...

                      host.raspberrypi	2021-03-04 22:54:25.246	error	instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
                      host.raspberrypi	2021-03-04 22:54:25.246	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/index.js:14:22)
                      host.raspberrypi	2021-03-04 22:54:25.245	error	Caught by controller[0]: at require (internal/modules/cjs/helpers.js:25:18)
                      host.raspberrypi	2021-03-04 22:54:25.245	error	Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:692:17)
                      host.raspberrypi	2021-03-04 22:54:25.245	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:585:3)
                      host.raspberrypi	2021-03-04 22:54:25.245	error	Caught by controller[0]: at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
                      host.raspberrypi	2021-03-04 22:54:25.244	error	Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32)
                      host.raspberrypi	2021-03-04 22:54:25.244	error	Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
                      host.raspberrypi	2021-03-04 22:54:25.244	error	Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:778:30)
                      host.raspberrypi	2021-03-04 22:54:25.244	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/linux.js:2:36)
                      host.raspberrypi	2021-03-04 22:54:25.244	error	Caught by controller[0]: at bindings (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:126:9)
                      host.raspberrypi	2021-03-04 22:54:25.243	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/binding/node-v64-linux-arm/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.243	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/addon-build/default/install-root/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.243	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/addon-build/debug/install-root/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.243	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/addon-build/release/install-root/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.242	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/compiled/10.22.0/linux/arm/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.242	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/default/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.242	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/Release/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.242	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/out/Release/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.241	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/Debug/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.241	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/out/Debug/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.241	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/Release/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.241	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/Debug/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.240	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/bindings.node
                      host.raspberrypi	2021-03-04 22:54:25.240	error	Caught by controller[0]: Error: Could not locate the bindings file. Tried:
                      host.raspberrypi	2021-03-04 22:54:25.240	error	Caught by controller[0]: ^
                      host.raspberrypi	2021-03-04 22:54:25.240	error	Caught by controller[0]: throw err;
                      host.raspberrypi	2021-03-04 22:54:25.239	error	Caught by controller[0]: /opt/iobroker/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:135
                      host.raspberrypi	2021-03-04 22:54:23.987	info	instance system.adapter.zigbee.0 started with pid 8841
                      
                      Jan FiedlerJ 1 Antwort Letzte Antwort
                      0
                      • Jan FiedlerJ Jan Fiedler

                        @asgothian Hat leider nicht geholfen...

                        host.raspberrypi	2021-03-04 22:54:25.246	error	instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
                        host.raspberrypi	2021-03-04 22:54:25.246	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/index.js:14:22)
                        host.raspberrypi	2021-03-04 22:54:25.245	error	Caught by controller[0]: at require (internal/modules/cjs/helpers.js:25:18)
                        host.raspberrypi	2021-03-04 22:54:25.245	error	Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:692:17)
                        host.raspberrypi	2021-03-04 22:54:25.245	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:585:3)
                        host.raspberrypi	2021-03-04 22:54:25.245	error	Caught by controller[0]: at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
                        host.raspberrypi	2021-03-04 22:54:25.244	error	Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:653:32)
                        host.raspberrypi	2021-03-04 22:54:25.244	error	Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
                        host.raspberrypi	2021-03-04 22:54:25.244	error	Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:778:30)
                        host.raspberrypi	2021-03-04 22:54:25.244	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/linux.js:2:36)
                        host.raspberrypi	2021-03-04 22:54:25.244	error	Caught by controller[0]: at bindings (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:126:9)
                        host.raspberrypi	2021-03-04 22:54:25.243	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/lib/binding/node-v64-linux-arm/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.243	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/addon-build/default/install-root/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.243	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/addon-build/debug/install-root/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.243	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/addon-build/release/install-root/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.242	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/compiled/10.22.0/linux/arm/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.242	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/default/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.242	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/Release/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.242	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/out/Release/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.241	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/Debug/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.241	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/out/Debug/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.241	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/Release/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.241	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/Debug/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.240	error	Caught by controller[0]: → /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/bindings.node
                        host.raspberrypi	2021-03-04 22:54:25.240	error	Caught by controller[0]: Error: Could not locate the bindings file. Tried:
                        host.raspberrypi	2021-03-04 22:54:25.240	error	Caught by controller[0]: ^
                        host.raspberrypi	2021-03-04 22:54:25.240	error	Caught by controller[0]: throw err;
                        host.raspberrypi	2021-03-04 22:54:25.239	error	Caught by controller[0]: /opt/iobroker/node_modules/zigbee-herdsman/node_modules/bindings/bindings.js:135
                        host.raspberrypi	2021-03-04 22:54:23.987	info	instance system.adapter.zigbee.0 started with pid 8841
                        
                        Jan FiedlerJ Offline
                        Jan FiedlerJ Offline
                        Jan Fiedler
                        schrieb am zuletzt editiert von
                        #175

                        @jan-fiedler Was mir noch aufgefallen ist... Das sollte so nicht sein oder?

                        
                        pi@raspberrypi:~ $ npm list serialport
                        /home/pi
                        └── (empty)
                        
                        
                        
                        Thomas BraunT AsgothianA 2 Antworten Letzte Antwort
                        0
                        • Jan FiedlerJ Jan Fiedler

                          @jan-fiedler Was mir noch aufgefallen ist... Das sollte so nicht sein oder?

                          
                          pi@raspberrypi:~ $ npm list serialport
                          /home/pi
                          └── (empty)
                          
                          
                          
                          Thomas BraunT Online
                          Thomas BraunT Online
                          Thomas Braun
                          Most Active
                          schrieb am zuletzt editiert von
                          #176

                          @jan-fiedler Doch, das soll so sein in deinem home.
                          Stell dich nach /opt/iobroker

                          Linux-Werkzeugkasten:
                          https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                          NodeJS Fixer Skript:
                          https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                          iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                          1 Antwort Letzte Antwort
                          0
                          • Jan FiedlerJ Jan Fiedler

                            @jan-fiedler Was mir noch aufgefallen ist... Das sollte so nicht sein oder?

                            
                            pi@raspberrypi:~ $ npm list serialport
                            /home/pi
                            └── (empty)
                            
                            
                            
                            AsgothianA Offline
                            AsgothianA Offline
                            Asgothian
                            Developer
                            schrieb am zuletzt editiert von
                            #177

                            @jan-fiedler Doch.. der Befehl muss im Verzeichnis /opt/iobroker angegeben werden

                            A.

                            ioBroker auf RPi4 - Hardware soweit wie möglich via Zigbee.
                            "Shit don't work" ist keine Fehlermeldung, sondern ein Fluch.

                            Jan FiedlerJ 1 Antwort Letzte Antwort
                            0
                            • AsgothianA Asgothian

                              @jan-fiedler Doch.. der Befehl muss im Verzeichnis /opt/iobroker angegeben werden

                              A.

                              Jan FiedlerJ Offline
                              Jan FiedlerJ Offline
                              Jan Fiedler
                              schrieb am zuletzt editiert von
                              #178

                              @asgothian

                              pi@raspberrypi:/opt/iobroker $ npm list serialport
                              iobroker.inst@2.0.3 /opt/iobroker
                              ├─┬ iobroker.discovery@2.5.0
                              │ └── serialport@9.0.7  deduped
                              └── serialport@9.0.7
                              
                              
                              Thomas BraunT 1 Antwort Letzte Antwort
                              1
                              • Jan FiedlerJ Jan Fiedler

                                @asgothian

                                pi@raspberrypi:/opt/iobroker $ npm list serialport
                                iobroker.inst@2.0.3 /opt/iobroker
                                ├─┬ iobroker.discovery@2.5.0
                                │ └── serialport@9.0.7  deduped
                                └── serialport@9.0.7
                                
                                
                                Thomas BraunT Online
                                Thomas BraunT Online
                                Thomas Braun
                                Most Active
                                schrieb am zuletzt editiert von
                                #179

                                @jan-fiedler
                                Schaut bei mir anders aus:

                                pi@raspberrypi:/opt/iobroker $ npm list serialport
                                iobroker.inst@2.0.3 /opt/iobroker
                                └─┬ iobroker.zigbee@1.4.4
                                  ├─┬ zigbee-herdsman@0.13.70
                                  │ └── serialport@9.0.6
                                  └─┬ zigbee-herdsman-converters@14.0.57
                                    └─┬ zigbee-herdsman@0.13.68
                                      └── serialport@9.0.6
                                
                                pi@raspberrypi:/opt/iobroker $
                                

                                Linux-Werkzeugkasten:
                                https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                NodeJS Fixer Skript:
                                https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                Jan FiedlerJ 1 Antwort Letzte Antwort
                                0
                                • Thomas BraunT Thomas Braun

                                  @jan-fiedler
                                  Schaut bei mir anders aus:

                                  pi@raspberrypi:/opt/iobroker $ npm list serialport
                                  iobroker.inst@2.0.3 /opt/iobroker
                                  └─┬ iobroker.zigbee@1.4.4
                                    ├─┬ zigbee-herdsman@0.13.70
                                    │ └── serialport@9.0.6
                                    └─┬ zigbee-herdsman-converters@14.0.57
                                      └─┬ zigbee-herdsman@0.13.68
                                        └── serialport@9.0.6
                                  
                                  pi@raspberrypi:/opt/iobroker $
                                  
                                  Jan FiedlerJ Offline
                                  Jan FiedlerJ Offline
                                  Jan Fiedler
                                  schrieb am zuletzt editiert von Jan Fiedler
                                  #180

                                  @thomas-braun Ich hab jetzt nochmal ein npm rebuild in den /opt/iobroker Verzeichnis durchgeführt. Allerdings hat das nur zu einem Haufen folgender Fehler geführt. Hab ich vllt eine inkompatible node Version?

                                  warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
                                  
                                  
                                  npm ERR! code ELIFECYCLE
                                  npm ERR! errno 1
                                  npm ERR! node-aead-crypto@2.2.0 preinstall: `node lib/preinstall.js`
                                  npm ERR! Exit status 1
                                  npm ERR!
                                  npm ERR! Failed at the node-aead-crypto@2.2.0 preinstall script.
                                  npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
                                  
                                  npm ERR! A complete log of this run can be found in:
                                  
                                  

                                  2021-03-04T22_11_47_952Z-debug.log

                                  Thomas BraunT 1 Antwort Letzte Antwort
                                  0
                                  • Jan FiedlerJ Jan Fiedler

                                    @thomas-braun Ich hab jetzt nochmal ein npm rebuild in den /opt/iobroker Verzeichnis durchgeführt. Allerdings hat das nur zu einem Haufen folgender Fehler geführt. Hab ich vllt eine inkompatible node Version?

                                    warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
                                    
                                    
                                    npm ERR! code ELIFECYCLE
                                    npm ERR! errno 1
                                    npm ERR! node-aead-crypto@2.2.0 preinstall: `node lib/preinstall.js`
                                    npm ERR! Exit status 1
                                    npm ERR!
                                    npm ERR! Failed at the node-aead-crypto@2.2.0 preinstall script.
                                    npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
                                    
                                    npm ERR! A complete log of this run can be found in:
                                    
                                    

                                    2021-03-04T22_11_47_952Z-debug.log

                                    Thomas BraunT Online
                                    Thomas BraunT Online
                                    Thomas Braun
                                    Most Active
                                    schrieb am zuletzt editiert von
                                    #181

                                    @jan-fiedler Wie schaut die node-Installation denn aus?

                                    Linux-Werkzeugkasten:
                                    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                    NodeJS Fixer Skript:
                                    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                    Jan FiedlerJ 1 Antwort Letzte Antwort
                                    0
                                    • Thomas BraunT Thomas Braun

                                      @jan-fiedler Wie schaut die node-Installation denn aus?

                                      Jan FiedlerJ Offline
                                      Jan FiedlerJ Offline
                                      Jan Fiedler
                                      schrieb am zuletzt editiert von
                                      #182

                                      @thomas-braun Wie genau meinst du das? Versionsnummern? Logs?
                                      Der Adapter ist allerdings aktuell auf Grün gewechselt spannenderweise...

                                      Thomas BraunT 1 Antwort Letzte Antwort
                                      0
                                      • Jan FiedlerJ Jan Fiedler

                                        @thomas-braun Wie genau meinst du das? Versionsnummern? Logs?
                                        Der Adapter ist allerdings aktuell auf Grün gewechselt spannenderweise...

                                        Thomas BraunT Online
                                        Thomas BraunT Online
                                        Thomas Braun
                                        Most Active
                                        schrieb am zuletzt editiert von
                                        #183

                                        @jan-fiedler

                                        which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs
                                        

                                        Dein System scheint aber auch steinalt zu sein.

                                        sudo apt update
                                        sudo apt dist-upgrade
                                        sudo reboot
                                        

                                        Linux-Werkzeugkasten:
                                        https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                        NodeJS Fixer Skript:
                                        https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                        iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                        Jan FiedlerJ arteckA 2 Antworten Letzte Antwort
                                        0
                                        • Thomas BraunT Thomas Braun

                                          @jan-fiedler

                                          which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs
                                          

                                          Dein System scheint aber auch steinalt zu sein.

                                          sudo apt update
                                          sudo apt dist-upgrade
                                          sudo reboot
                                          
                                          Jan FiedlerJ Offline
                                          Jan FiedlerJ Offline
                                          Jan Fiedler
                                          schrieb am zuletzt editiert von
                                          #184

                                          @thomas-braun sagte in ZigBee neue Version 1.4.4:

                                          which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs

                                          Das kann schon sein... macht halt nur ioBroker ;)

                                          pi@raspberrypi:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs
                                          /usr/bin/nodejs
                                          v10.22.0
                                          /usr/bin/node
                                          v10.22.0
                                          /usr/bin/npm
                                          6.14.6
                                          nodejs:
                                            Installiert:           10.22.0-1nodesource1
                                            Installationskandidat: 10.22.0-1nodesource1
                                            Versionstabelle:
                                           *** 10.22.0-1nodesource1 500
                                                  500 https://deb.nodesource.com/node_10.x buster/main armhf Packages
                                                  100 /var/lib/dpkg/status
                                               10.21.0~dfsg-1~deb10u1+rpi1 500
                                                  500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages
                                          
                                          
                                          Thomas BraunT 1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate

                                          593

                                          Online

                                          32.4k

                                          Benutzer

                                          81.5k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe