NEWS
Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5
-
@gifftstaub hmm ok.. ich schau mal .. muss erst mein DEV auf node 12 bringen
Probiert habe ich auch mit sudo rm -R /opt/iobroker/node_modules/@serialport und ein npm install serialport --build-from-source
npm install serialport --build-from-source > @serialport/bindings@8.0.8 install /opt/iobroker/node_modules/iobroker.discovery/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/iobroker.discovery/node_modules/@serialport/bindings/build“ wird betreten CXX(target) Release/obj.target/bindings/src/serialport.o In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/serialport_unix.o In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: ../../../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/poller.o In file included from ../src/poller.cpp:1: ../../../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ CXX(target) Release/obj.target/bindings/src/serialport_linux.o SOLINK_MODULE(target) Release/obj.target/bindings.node COPY Release/bindings.node make: Verzeichnis „/opt/iobroker/node_modules/iobroker.discovery/node_modules/@serialport/bindings/build“ wird verlassen > @serialport/bindings@9.0.0 install /opt/iobroker/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird betreten CXX(target) Release/obj.target/bindings/src/serialport.o In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/serialport_unix.o In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/poller.o In file included from ../src/poller.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ CXX(target) Release/obj.target/bindings/src/serialport_linux.o SOLINK_MODULE(target) Release/obj.target/bindings.node COPY Release/bindings.node make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird verlassen > serialport@8.0.8 postinstall /opt/iobroker/node_modules/iobroker.discovery/node_modules/serialport > node thank-you.js Thank you for using serialport! If you rely on this package, please consider supporting our open collective: > https://opencollective.com/serialport/donate > serialport@9.0.0 postinstall /opt/iobroker/node_modules/serialport > node thank-you.js Thank you for using serialport! If you rely on this package, please consider supporting our open collective: > https://opencollective.com/serialport/donate npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.3 (node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.2 (node_modules/zigbee-herdsman-converters/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.2 (node_modules/zigbee-herdsman/node_modules/jest-haste-map/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.12 (node_modules/zigbee-herdsman/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@1.2.12: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) + serialport@9.0.0 added 31 packages from 3 contributors and updated 1 package in 50.316s 49 packages are looking for funding run `npm fund` for detailstrozdem die gleichen fehlermeldungen.
ich sehe gerade beim installieren des Adapters ergibt sich folgende Meldungen.
$ ./iobroker add zigbee --host raspberrypi NPM version: 6.14.5 npm install iobroker.zigbee@1.1.1 --loglevel error --prefix "/opt/iobroker" (System call) In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope:../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^/home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ../src/poller.cpp:1:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ host.raspberrypi install adapter zigbee upload [200] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/index_m.html index_m.html text/html upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_lightbar.png img/philips_hue_lightbar.png image/png upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lifecontrol_lamp.png img/lifecontrol_lamp.png image/png upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/jiawen.png img/jiawen.png image/png upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/iluminize_511_040.png img/iluminize_511_040.png image/png upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_led1837r5.PNG img/ikea_led1837r5.PNG image/png upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/hue_go.png img/hue_go.png image/png upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/gledopto_bulb.png img/gledopto_bulb.png image/png upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ewelink_MS01.png img/ewelink_MS01.png image/png upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_neutral1.png img/ctrl_neutral1.png image/png upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_switch.png img/aqara_switch.png image/png upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_numan_body_sensor.png img/aqara_numan_body_sensor.png image/png upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_curtain.png img/aqara_curtain.png image/png upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_bulb.png img/aqara_bulb.png image/png upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ZWLD-100.png img/ZWLD-100.png image/png upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TS0218.png img/TS0218.png image/png upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TS0215.png img/TS0215.png image/png upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LTW017.png img/LTW017.png image/png upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LTC015.png img/LTC015.png image/png upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LTC014.png img/LTC014.png image/png upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LCT002.png img/LCT002.png image/png upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Ikea_fyrtur.png img/Ikea_fyrtur.png image/png upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ.png img/DIYRuZ.png image/png upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Bitron_AV201021A.png img/Bitron_AV201021A.png image/png upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/AV2010_32.png img/AV2010_32.png image/png upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript host.raspberrypi object system.adapter.zigbee created/updated host.raspberrypi create instance zigbee host.raspberrypi object zigbee.0.info.groups created host.raspberrypi object zigbee.0.info.pairingMessage created host.raspberrypi object zigbee.0.info.pairingCountdown created host.raspberrypi object zigbee.0.info.pairingMode created host.raspberrypi object zigbee.0.info.connection created host.raspberrypi object zigbee.0.info created host.raspberrypi object system.adapter.zigbee.0.sigKill created host.raspberrypi object system.adapter.zigbee.0.eventLoopLag created host.raspberrypi object system.adapter.zigbee.0.outputCount created host.raspberrypi object system.adapter.zigbee.0.inputCount created host.raspberrypi object system.adapter.zigbee.0.uptime created host.raspberrypi object system.adapter.zigbee.0.memRss created host.raspberrypi object system.adapter.zigbee.0.memHeapTotal created host.raspberrypi object system.adapter.zigbee.0.memHeapUsed created host.raspberrypi object system.adapter.zigbee.0.cputime created host.raspberrypi object system.adapter.zigbee.0.cpu created host.raspberrypi object system.adapter.zigbee.0.compactMode created host.raspberrypi object system.adapter.zigbee.0.connected created host.raspberrypi object system.adapter.zigbee.0.alive created host.raspberrypi Set default value of zigbee.0.info.groups: host.raspberrypi Set default value of zigbee.0.info.pairingMessage: host.raspberrypi Set default value of zigbee.0.info.pairingCountdown: 0 host.raspberrypi Set default value of zigbee.0.info.pairingMode: false host.raspberrypi Set default value of zigbee.0.info.connection: false host.raspberrypi object system.adapter.zigbee.0 created process exited with code 0lg
-
Push
Ich habe nun folgendes gemacht.
pi@raspberrypi:/opt/iobroker/node_modules/serialport $ npm install --production > @serialport/bindings@8.0.8 install /opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild prebuild-install WARN install No prebuilt binaries found (target=12.18.0 runtime=node arch=arm libc= platform=linux) make: Verzeichnis „/opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings/build“ wird betreten CXX(target) Release/obj.target/bindings/src/serialport.o In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/serialport_unix.o In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/poller.o In file included from ../src/poller.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ CXX(target) Release/obj.target/bindings/src/serialport_linux.o SOLINK_MODULE(target) Release/obj.target/bindings.node COPY Release/bindings.node make: Verzeichnis „/opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings/build“ wird verlassen > serialport@8.0.8 postinstall /opt/iobroker/node_modules/serialport > node thank-you.js Thank you for using serialport! If you rely on this package, please consider supporting our open collective: > https://opencollective.com/serialport/donate npm notice created a lockfile as package-lock.json. You should commit this file. added 73 packages from 43 contributors and audited 78 packages in 16.172s 1 package is looking for funding run `npm fund` for details found 0 vulnerabilities pi@raspberrypi:/opt/iobroker/node_modules/serialport $ npm fund serialport@8.0.8 └─┬ https://github.com/sponsors/sindresorhus └── mimic-response@2.1.0liegt das Problem an der 12.18.0?
prebuild-install WARN install No prebuilt binaries found (target=12.18.0 runtime=node arch=arm libc= platform=linux)lg
-
Push
Ich habe nun folgendes gemacht.
pi@raspberrypi:/opt/iobroker/node_modules/serialport $ npm install --production > @serialport/bindings@8.0.8 install /opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild prebuild-install WARN install No prebuilt binaries found (target=12.18.0 runtime=node arch=arm libc= platform=linux) make: Verzeichnis „/opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings/build“ wird betreten CXX(target) Release/obj.target/bindings/src/serialport.o In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/serialport_unix.o In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/poller.o In file included from ../src/poller.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ CXX(target) Release/obj.target/bindings/src/serialport_linux.o SOLINK_MODULE(target) Release/obj.target/bindings.node COPY Release/bindings.node make: Verzeichnis „/opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings/build“ wird verlassen > serialport@8.0.8 postinstall /opt/iobroker/node_modules/serialport > node thank-you.js Thank you for using serialport! If you rely on this package, please consider supporting our open collective: > https://opencollective.com/serialport/donate npm notice created a lockfile as package-lock.json. You should commit this file. added 73 packages from 43 contributors and audited 78 packages in 16.172s 1 package is looking for funding run `npm fund` for details found 0 vulnerabilities pi@raspberrypi:/opt/iobroker/node_modules/serialport $ npm fund serialport@8.0.8 └─┬ https://github.com/sponsors/sindresorhus └── mimic-response@2.1.0liegt das Problem an der 12.18.0?
prebuild-install WARN install No prebuilt binaries found (target=12.18.0 runtime=node arch=arm libc= platform=linux)lg
@gifftstaub
Nein, mit 12.18.0 hat das grundsätzlich nichts zu tun, denn:pi@raspberrypi:/opt/iobroker $ nodejs -v v12.18.0 pi@raspberrypi:/opt/iobroker $ npm ls serialport iobroker.inst@2.0.3 /opt/iobroker ├─┬ iobroker.discovery@2.3.7 │ └── serialport@8.0.8 └─┬ iobroker.zigbee@1.1.1 └─┬ zigbee-herdsman@0.12.83 └── serialport@8.0.7 -
@gifftstaub
Nein, mit 12.18.0 hat das grundsätzlich nichts zu tun, denn:pi@raspberrypi:/opt/iobroker $ nodejs -v v12.18.0 pi@raspberrypi:/opt/iobroker $ npm ls serialport iobroker.inst@2.0.3 /opt/iobroker ├─┬ iobroker.discovery@2.3.7 │ └── serialport@8.0.8 └─┬ iobroker.zigbee@1.1.1 └─┬ zigbee-herdsman@0.12.83 └── serialport@8.0.7könnte der Stick defekt sein?
pi@raspberrypi:/opt/iobroker $ npm ls serialport iobroker.inst@2.0.3 /opt/iobroker ├─┬ iobroker.discovery@2.3.7 │ └── serialport@8.0.8 └─┬ iobroker.zigbee@1.0.0 └─┬ zigbee-herdsman@0.12.95 └── serialport@8.0.7lg
-
könnte der Stick defekt sein?
pi@raspberrypi:/opt/iobroker $ npm ls serialport iobroker.inst@2.0.3 /opt/iobroker ├─┬ iobroker.discovery@2.3.7 │ └── serialport@8.0.8 └─┬ iobroker.zigbee@1.0.0 └─┬ zigbee-herdsman@0.12.95 └── serialport@8.0.7lg
@gifftstaub
Hast du eigentlich im Raspberry auch den Serialport insudo raspi-configaktiviert?
Geht unter 5 - P6 - No - Yes
-
@gifftstaub
Hast du eigentlich im Raspberry auch den Serialport insudo raspi-configaktiviert?
Geht unter 5 - P6 - No - Yes
eingentlich ja am serialport war ich nocch nie dran.
ich habe das mal proformer gemacht wie du beschrieben hast, nach einem reboot immer noch die gleichen Meldungen.
zigbee.0 2020-06-16 14:21:14.793 error at /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12 zigbee.0 2020-06-16 14:21:14.793 error at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-06-16 14:21:14.793 error at SerialPort.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49) zigbee.0 2020-06-16 14:21:14.793 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12) zigbee.0 2020-06-16 14:21:14.793 error at new Promise (<anonymous>) zigbee.0 2020-06-16 14:21:14.793 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71 zigbee.0 2020-06-16 14:21:14.793 error at Generator.next (<anonymous>) zigbee.0 2020-06-16 14:21:14.793 error at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32) zigbee.0 2020-06-16 14:21:14.793 error (2686) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-06-16 14:21:14.792 error (2686) Failed to start Zigbee zigbee.0 2020-06-16 14:21:14.554 info (2686) Starting Zigbee...lg
-
eingentlich ja am serialport war ich nocch nie dran.
ich habe das mal proformer gemacht wie du beschrieben hast, nach einem reboot immer noch die gleichen Meldungen.
zigbee.0 2020-06-16 14:21:14.793 error at /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12 zigbee.0 2020-06-16 14:21:14.793 error at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-06-16 14:21:14.793 error at SerialPort.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49) zigbee.0 2020-06-16 14:21:14.793 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12) zigbee.0 2020-06-16 14:21:14.793 error at new Promise (<anonymous>) zigbee.0 2020-06-16 14:21:14.793 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71 zigbee.0 2020-06-16 14:21:14.793 error at Generator.next (<anonymous>) zigbee.0 2020-06-16 14:21:14.793 error at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32) zigbee.0 2020-06-16 14:21:14.793 error (2686) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-06-16 14:21:14.792 error (2686) Failed to start Zigbee zigbee.0 2020-06-16 14:21:14.554 info (2686) Starting Zigbee...lg
@gifftstaub sagte in Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5:
zigbee.0 2020-06-16 14:21:14.793 error (2686) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'
Da greift wohl schon irgendwas anderes drauf zu. Hast du noch deConz parallel laufen?
-
@gifftstaub sagte in Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5:
zigbee.0 2020-06-16 14:21:14.793 error (2686) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'
Da greift wohl schon irgendwas anderes drauf zu. Hast du noch deConz parallel laufen?
nein nur zigbee
-
liste der Installierten Adapter
Used repository: latest hash unchanged, use cached sources update done Adapter "accuweather" : 1.1.3 Adapter "admin" : 4.1.1 , installed 4.1.1 Adapter "alarm" : 0.7.5 Adapter "alexa2" : 3.1.2 , installed 3.1.2 Adapter "alpha2" : 1.0.0 Adapter "amazon-dash" : 1.1.0 Adapter "artnet" : 1.2.2 Adapter "asterisk" : 1.0.6 Adapter "asuswrt" : 1.0.1 Adapter "b-control-em" : 0.2.1 Adapter "backitup" : 1.5.8 , installed 1.5.8 Adapter "beckhoff" : 1.2.2 Adapter "benq" : 0.2.2 Adapter "binance" : 1.1.2 Adapter "ble" : 0.11.6 Adapter "blink4home" : 0.1.1 Adapter "bmw" : 1.4.0 Adapter "boblight" : 0.0.1 Adapter "bosesoundtouch": 0.9.2 Adapter "botvac" : 1.0.0 Adapter "bring" : 1.7.2 Adapter "broadlink2" : 2.0.3 Adapter "bsblan" : 0.1.2 Adapter "bshb" : 0.1.10 Adapter "calendar" : 1.2.0 Adapter "cameras" : 0.1.2 Adapter "chromecast" : 2.3.1 Adapter "cloud" : 3.0.3 Adapter "comfoair" : 1.1.1 Adapter "contact" : 1.1.3 Adapter "contactid" : 1.0.0 Adapter "coronavirus-statistics": 0.5.9 Adapter "corrently" : 0.0.2 Adapter "countdown" : 1.1.0 Adapter "cul" : 1.2.1 Adapter "daikin" : 1.0.5 Adapter "daswetter" : 3.0.1 Adapter "deconz" : 1.3.9 Adapter "denon" : 1.7.7 Adapter "devices" : 0.3.6 Adapter "digitalstrom" : 2.0.5 Adapter "discovergy" : 0.5.4 Adapter "discovery" : 2.3.7 , installed 2.3.7 Adapter "doorbird" : 0.1.5 Adapter "ds18b20" : 1.1.4 Adapter "dwd" : 2.4.10 Adapter "ebus" : 2.0.0 Adapter "ecovacs-deebot": 1.0.3 Adapter "egigeozone" : 0.1.2 Adapter "ekey" : 1.1.0 Adapter "email" : 1.0.7 , installed 1.0.7 Adapter "emby" : 1.0.2 Adapter "energymanager" : 1.2.2 Adapter "enet" : 1.0.1 Adapter "epson_stylus_px830": 0.2.1 Adapter "exchangerates" : 0.0.13 Adapter "fakeroku" : 0.2.1 Adapter "fb-checkpresence": 1.0.3 Adapter "feiertage" : 1.0.19 Adapter "fhem" : 1.5.2 Adapter "find-my-iphone": 0.2.17 Adapter "firetv" : 1.0.0 Adapter "fitbit-api" : 0.1.1 Adapter "flot" : 1.10.0 Adapter "foobar2000" : 2.0.3 Adapter "fritzbox" : 0.2.1 Adapter "fritzdect" : 0.3.2 Adapter "fronius" : 1.0.5 Adapter "fullcalendar" : 1.1.0 Adapter "fullybrowser" : 1.0.3 Adapter "g-homa" : 0.5.3 Adapter "geofency" : 0.3.2 Adapter "gruenbeck" : 0.0.18 Adapter "habpanel" : 0.4.1 Adapter "haier" : 1.0.3 Adapter "ham" : 1.1.2 Adapter "ham-wemo" : 1.0.1 Adapter "harmony" : 1.2.2 Adapter "hass-mqtt" : 0.0.7 Adapter "heatingcontrol": 0.5.6 Adapter "heytech" : 0.2.0 Adapter "hid" : 0.1.17 Adapter "hilink" : 0.2.7 Adapter "history" : 1.9.8 , installed 1.9.8 Adapter "hm-rega" : 2.6.14 Adapter "hm-rpc" : 1.14.10 Adapter "hmip" : 1.0.1 Adapter "hombot" : 0.1.3 Adapter "homeconnect" : 0.0.30 Adapter "homee" : 1.0.7 Adapter "homepilot" : 1.1.4 Adapter "hp-ilo" : 1.0.5 Adapter "hs100" : 2.0.0 Adapter "hue" : 3.3.5 Adapter "hue-extended" : 1.3.2 Adapter "hyperion" : 0.0.9 Adapter "i2c" : 0.0.6 Adapter "ical" : 1.7.0 , installed 1.7.0 Adapter "icons-addictive-flavour-png": 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0 Adapter "icons-icons8" : 0.0.1 Adapter "icons-material-png": 0.1.0 Adapter "icons-material-svg": 0.1.0 Adapter "icons-mfd-png" : 1.0.2 Adapter "icons-mfd-svg" : 1.0.2 Adapter "icons-open-icon-library-png": 0.1.2 Adapter "icons-ultimate-png": 1.0.1 Adapter "influxdb" : 1.8.6 Adapter "info" : 1.7.5 , installed 1.7.5 Adapter "innogy-smarthome": 0.3.4 Adapter "intesishome" : 0.1.2 Adapter "iogo" : 0.5.10 Adapter "iot" : 1.5.3 , installed 1.5.3 Adapter "iqontrol" : 1.1.0 , installed 1.1.0 Adapter "javascript" : 4.6.17 , installed 4.6.17 Adapter "jeelink" : 0.1.3 Controller "js-controller" : 3.1.5 , installed 3.1.5 Adapter "js2fs" : 0.1.5 Adapter "kecontact" : 0.1.0 Adapter "klf200" : 0.9.5 Adapter "km200" : 2.0.3 Adapter "knmi-weather" : 0.2.0 Adapter "knx" : 1.0.41 Adapter "kodi" : 2.0.4 Adapter "kress" : 2.5.5 Adapter "lametric" : 0.0.9 Adapter "landroid" : 1.0.3 Adapter "lcn" : 0.6.3 Adapter "legrand-ecocompteur": 0.0.4 Adapter "letrika_comgw" : 0.0.5 Adapter "lgtv" : 1.1.6 Adapter "lgtv-rs" : 0.1.0 Adapter "lgtv11" : 1.0.5 Adapter "lifx" : 0.1.1 Adapter "lightify" : 0.2.16 Adapter "link" : 0.5.9 Adapter "linkeddevices" : 1.1.4 Adapter "logparser" : 0.4.11 Adapter "lovelace" : 1.1.0 Adapter "loxone" : 1.0.0 Adapter "luftdaten" : 0.0.15 Adapter "lupusec" : 1.2.7 Adapter "luxtronik1" : 0.2.3 Adapter "material" : 0.13.8 Adapter "maxcube" : 0.1.2 Adapter "maxcul" : 1.3.0 Adapter "mbus" : 2.2.0 Adapter "mclighting" : 0.1.1 Adapter "megad" : 1.2.1 Adapter "megadd" : 0.2.0 Adapter "megaesp" : 0.1.0 Adapter "mercedesme" : 0.0.21 Adapter "mercury" : 0.1.1 Adapter "meross" : 1.4.1 Adapter "meteoalarm" : 1.1.0 Adapter "midea" : 0.0.6 Adapter "miele" : 0.1.5 Adapter "mielecloudservice": 1.2.4 Adapter "mihome" : 1.3.0 Adapter "mihome-airpurifier": 0.1.8 Adapter "mihome-lamp" : 1.1.0 Adapter "mihome-plug" : 0.2.1 Adapter "mihome-vacuum" : 2.0.7 Adapter "miio" : 0.0.13 Adapter "mikrotik" : 1.0.12 Adapter "milight" : 0.3.6 Adapter "milight-smart-light": 0.6.0 Adapter "mobile" : 0.5.0 Adapter "modbus" : 3.1.3 Adapter "moma" : 1.2.6 Adapter "mpd" : 1.0.5 Adapter "mqtt" : 2.1.3 Adapter "mqtt-client" : 1.3.1 Adapter "multicast" : 0.1.5 Adapter "musiccast" : 0.1.3 Adapter "mydlink" : 1.1.2 Adapter "myq" : 0.1.1 Adapter "mysensors" : 2.0.1 Adapter "myvbus" : 0.0.6 Adapter "nanoleaf-lightpanels": 0.8.2 Adapter "nello" : 2.0.8 Adapter "netatmo" : 1.3.1 Adapter "nibeuplink" : 0.3.0 Adapter "nina" : 0.0.23 Adapter "node-red" : 1.17.2 Adapter "noolitef" : 0.0.2 Adapter "nuki" : 1.2.3 Adapter "nuki-extended" : 2.2.5 , installed 2.2.5 Adapter "nut" : 1.1.3 Adapter "octoprint" : 0.0.4 Adapter "odl" : 1.0.5 Adapter "oilfox" : 2.1.0 Adapter "onkyo" : 2.0.3 Adapter "onvif" : 0.4.3 Adapter "openhab" : 1.1.0 Adapter "openligadb" : 1.2.0 Adapter "opentherm" : 0.1.9 Adapter "openweathermap": 0.1.0 Adapter "opi" : 0.1.1 Adapter "oppoplayer" : 0.2.1 Adapter "owfs" : 0.6.4 Adapter "owntracks" : 0.6.3 Adapter "panasonic-viera": 1.0.2 Adapter "parser" : 1.0.7 Adapter "paw" : 0.3.2 Adapter "phantomjs" : 1.0.1 Adapter "pi-hole" : 1.2.3 Adapter "piface" : 1.0.0 Adapter "pimatic" : 0.3.0 Adapter "ping" : 1.4.7 Adapter "places" : 0.7.0 Adapter "plenticore" : 2.1.3 Adapter "plex" : 0.8.11 Adapter "plexconnect" : 0.0.7 Adapter "pollenflug" : 1.0.6 Adapter "primelab" : 1.0.2 Adapter "proxmox" : 1.0.2 Adapter "proxy" : 1.2.1 Adapter "pushbullet" : 0.0.11 Adapter "pushover" : 2.0.2 Adapter "pushsafer" : 0.1.8 Adapter "radar2" : 2.0.1 Adapter "radiohead" : 1.0.7 Adapter "rainbird" : 0.2.2 Adapter "rflink" : 2.1.5 Adapter "rickshaw" : 1.0.0 Adapter "ring" : 1.1.3 Adapter "roadtraffic" : 0.2.0 Adapter "robonect" : 0.1.3 Adapter "roomba" : 1.1.1 Adapter "rpi2" : 1.2.0 , installed 1.2.0 Adapter "rssfeed" : 0.0.28 Adapter "s7" : 1.1.8 Adapter "samsung" : 0.2.9 Adapter "sanext" : 0.0.4 Adapter "sayit" : 1.9.8 Adapter "sbfspot" : 3.0.0 Adapter "scenes" : 2.0.7 , installed 1.1.0 [Updateable] Adapter "schoolfree" : 0.6.2 Adapter "senec" : 1.0.9 Adapter "shelly" : 3.3.1 Adapter "shuttercontrol": 0.6.2 Adapter "sia" : 1.0.4 Adapter "siegenia" : 1.0.0 Adapter "simple-api" : 2.4.6 , installed 2.4.6 Adapter "sma-em" : 0.5.7 Adapter "smappee" : 0.2.2 Adapter "smartmeter" : 3.1.2 Adapter "snips" : 1.5.0 Adapter "snmp" : 0.5.0 Adapter "socketio" : 3.0.9 , installed 3.0.9 Adapter "solarlog" : 2.0.0 Adapter "solarviewdatareader": 0.2.1 Adapter "solarwetter" : 1.0.0 Adapter "sonnen" : 1.5.2 Adapter "sonoff" : 2.3.3 , installed 2.3.3 Adapter "sonos" : 2.1.0 , installed 2.1.0 Adapter "sonus" : 0.1.1 Adapter "sony-bravia" : 1.0.1 Adapter "sourceanalytix": 0.4.2 Adapter "spotify-premium": 1.0.0 Adapter "sql" : 1.13.1 Adapter "squeezebox" : 1.0.0 Adapter "squeezeboxrpc" : 1.2.1 Adapter "starline" : 1.0.0 Adapter "statistics" : 0.2.2 Adapter "stiebel-isg" : 1.4.11 Adapter "stockmarket" : 0.0.2 Adapter "sunnyportal" : 0.1.5 Adapter "swiss-weather-api": 0.2.0 Adapter "synology" : 0.1.18 Adapter "systeminfo" : 0.3.1 Adapter "tado" : 0.1.9 Adapter "tahoma" : 0.3.3 Adapter "tankerkoenig" : 2.0.9 Adapter "telegram" : 1.5.9 , installed 1.5.9 Adapter "terminal" : 0.1.2 Adapter "tesla-motors" : 0.2.3 Adapter "text2command" : 1.3.0 , installed 1.3.0 Adapter "tileboard" : 0.1.1 Adapter "tinker" : 1.1.0 Adapter "tino" : 0.1.3 Adapter "tinyrx4" : 0.1.5 Adapter "tr-064" : 4.0.7 Adapter "tradfri" : 2.6.3 Adapter "trashschedule" : 0.0.9 , installed 0.0.9 Adapter "tunnelbroker-endpoint-updater": 0.0.1 Adapter "tuya" : 3.3.5 Adapter "tvspielfilm" : 2.0.1 Adapter "unifi" : 0.5.5 Adapter "unifi-protect" : 0.0.11 Adapter "upnp" : 1.0.16 Adapter "vaillant" : 0.0.10 Adapter "valloxmv" : 1.0.3 Adapter "vcard" : 0.0.9 Adapter "vedirect" : 0.1.0 Adapter "velux" : 0.0.6 Adapter "viessmann" : 1.2.4 Adapter "viessmannapi" : 1.3.2 Adapter "virtualpowermeter": 1.2.1 Adapter "vis" : 1.2.6 , installed 1.2.6 Adapter "vis-bars" : 0.1.4 Adapter "vis-canvas-gauges": 0.1.5 Adapter "vis-colorpicker": 1.2.0 Adapter "vis-fancyswitch": 1.1.0 Adapter "vis-google-fonts": 0.1.0 Adapter "vis-history" : 1.0.0 Adapter "vis-hqwidgets" : 1.1.4 , installed 1.1.4 Adapter "vis-inventwo" : 1.3.8 Adapter "vis-jqui-mfd" : 1.0.12 Adapter "vis-justgage" : 1.0.2 Adapter "vis-keyboard" : 0.0.2 Adapter "vis-lcars" : 1.0.4 Adapter "vis-map" : 1.0.4 Adapter "vis-material" : 0.1.3 Adapter "vis-material-webfont": 0.0.3 Adapter "vis-materialdesign": 0.3.14 Adapter "vis-metro" : 1.1.2 Adapter "vis-players" : 0.1.6 Adapter "vis-plumb" : 1.0.2 Adapter "vis-rgraph" : 0.0.2 Adapter "vis-timeandweather": 1.1.7 Adapter "vis-weather" : 2.5.2 Adapter "vodafone-speedtest": 0.0.5 Adapter "volvo" : 0.0.2 Adapter "vr200" : 1.0.0 Adapter "vw-connect" : 0.0.16 Adapter "weatherunderground": 3.2.1 Adapter "web" : 3.0.9 , installed 3.0.9 Adapter "web-speedy" : 0.2.0 Adapter "weishaupt-wem" : 0.0.8 Adapter "wiffi-wz" : 2.2.0 Adapter "wifilight" : 1.1.0 Adapter "windows-control": 0.1.3 Adapter "wlanthermo-nano": 0.1.1 Adapter "wled" : 0.5.0 Adapter "wm-bus" : 0.3.1 Adapter "wolf" : 1.2.0 Adapter "worx" : 1.0.2 Adapter "xbox" : 0.6.5 Adapter "xs1" : 1.0.2 Adapter "yahka" : 0.11.0 Adapter "yamaha" : 0.3.19 Adapter "yeelight-2" : 1.0.3 Adapter "youtube" : 0.0.11 Adapter "yr" : 2.0.3 Adapter "zigbee" : 1.1.1 , installed 1.1.1 Adapter "zoneminder" : 0.3.3 Adapter "zont" : 0.5.4 Adapter "zwave" : 2.0.1 Adapter "zwave2" : 1.3.3da ist auch nichts dabei was mein usb blockieren sollte.
lg
-
liste der Installierten Adapter
Used repository: latest hash unchanged, use cached sources update done Adapter "accuweather" : 1.1.3 Adapter "admin" : 4.1.1 , installed 4.1.1 Adapter "alarm" : 0.7.5 Adapter "alexa2" : 3.1.2 , installed 3.1.2 Adapter "alpha2" : 1.0.0 Adapter "amazon-dash" : 1.1.0 Adapter "artnet" : 1.2.2 Adapter "asterisk" : 1.0.6 Adapter "asuswrt" : 1.0.1 Adapter "b-control-em" : 0.2.1 Adapter "backitup" : 1.5.8 , installed 1.5.8 Adapter "beckhoff" : 1.2.2 Adapter "benq" : 0.2.2 Adapter "binance" : 1.1.2 Adapter "ble" : 0.11.6 Adapter "blink4home" : 0.1.1 Adapter "bmw" : 1.4.0 Adapter "boblight" : 0.0.1 Adapter "bosesoundtouch": 0.9.2 Adapter "botvac" : 1.0.0 Adapter "bring" : 1.7.2 Adapter "broadlink2" : 2.0.3 Adapter "bsblan" : 0.1.2 Adapter "bshb" : 0.1.10 Adapter "calendar" : 1.2.0 Adapter "cameras" : 0.1.2 Adapter "chromecast" : 2.3.1 Adapter "cloud" : 3.0.3 Adapter "comfoair" : 1.1.1 Adapter "contact" : 1.1.3 Adapter "contactid" : 1.0.0 Adapter "coronavirus-statistics": 0.5.9 Adapter "corrently" : 0.0.2 Adapter "countdown" : 1.1.0 Adapter "cul" : 1.2.1 Adapter "daikin" : 1.0.5 Adapter "daswetter" : 3.0.1 Adapter "deconz" : 1.3.9 Adapter "denon" : 1.7.7 Adapter "devices" : 0.3.6 Adapter "digitalstrom" : 2.0.5 Adapter "discovergy" : 0.5.4 Adapter "discovery" : 2.3.7 , installed 2.3.7 Adapter "doorbird" : 0.1.5 Adapter "ds18b20" : 1.1.4 Adapter "dwd" : 2.4.10 Adapter "ebus" : 2.0.0 Adapter "ecovacs-deebot": 1.0.3 Adapter "egigeozone" : 0.1.2 Adapter "ekey" : 1.1.0 Adapter "email" : 1.0.7 , installed 1.0.7 Adapter "emby" : 1.0.2 Adapter "energymanager" : 1.2.2 Adapter "enet" : 1.0.1 Adapter "epson_stylus_px830": 0.2.1 Adapter "exchangerates" : 0.0.13 Adapter "fakeroku" : 0.2.1 Adapter "fb-checkpresence": 1.0.3 Adapter "feiertage" : 1.0.19 Adapter "fhem" : 1.5.2 Adapter "find-my-iphone": 0.2.17 Adapter "firetv" : 1.0.0 Adapter "fitbit-api" : 0.1.1 Adapter "flot" : 1.10.0 Adapter "foobar2000" : 2.0.3 Adapter "fritzbox" : 0.2.1 Adapter "fritzdect" : 0.3.2 Adapter "fronius" : 1.0.5 Adapter "fullcalendar" : 1.1.0 Adapter "fullybrowser" : 1.0.3 Adapter "g-homa" : 0.5.3 Adapter "geofency" : 0.3.2 Adapter "gruenbeck" : 0.0.18 Adapter "habpanel" : 0.4.1 Adapter "haier" : 1.0.3 Adapter "ham" : 1.1.2 Adapter "ham-wemo" : 1.0.1 Adapter "harmony" : 1.2.2 Adapter "hass-mqtt" : 0.0.7 Adapter "heatingcontrol": 0.5.6 Adapter "heytech" : 0.2.0 Adapter "hid" : 0.1.17 Adapter "hilink" : 0.2.7 Adapter "history" : 1.9.8 , installed 1.9.8 Adapter "hm-rega" : 2.6.14 Adapter "hm-rpc" : 1.14.10 Adapter "hmip" : 1.0.1 Adapter "hombot" : 0.1.3 Adapter "homeconnect" : 0.0.30 Adapter "homee" : 1.0.7 Adapter "homepilot" : 1.1.4 Adapter "hp-ilo" : 1.0.5 Adapter "hs100" : 2.0.0 Adapter "hue" : 3.3.5 Adapter "hue-extended" : 1.3.2 Adapter "hyperion" : 0.0.9 Adapter "i2c" : 0.0.6 Adapter "ical" : 1.7.0 , installed 1.7.0 Adapter "icons-addictive-flavour-png": 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0 Adapter "icons-icons8" : 0.0.1 Adapter "icons-material-png": 0.1.0 Adapter "icons-material-svg": 0.1.0 Adapter "icons-mfd-png" : 1.0.2 Adapter "icons-mfd-svg" : 1.0.2 Adapter "icons-open-icon-library-png": 0.1.2 Adapter "icons-ultimate-png": 1.0.1 Adapter "influxdb" : 1.8.6 Adapter "info" : 1.7.5 , installed 1.7.5 Adapter "innogy-smarthome": 0.3.4 Adapter "intesishome" : 0.1.2 Adapter "iogo" : 0.5.10 Adapter "iot" : 1.5.3 , installed 1.5.3 Adapter "iqontrol" : 1.1.0 , installed 1.1.0 Adapter "javascript" : 4.6.17 , installed 4.6.17 Adapter "jeelink" : 0.1.3 Controller "js-controller" : 3.1.5 , installed 3.1.5 Adapter "js2fs" : 0.1.5 Adapter "kecontact" : 0.1.0 Adapter "klf200" : 0.9.5 Adapter "km200" : 2.0.3 Adapter "knmi-weather" : 0.2.0 Adapter "knx" : 1.0.41 Adapter "kodi" : 2.0.4 Adapter "kress" : 2.5.5 Adapter "lametric" : 0.0.9 Adapter "landroid" : 1.0.3 Adapter "lcn" : 0.6.3 Adapter "legrand-ecocompteur": 0.0.4 Adapter "letrika_comgw" : 0.0.5 Adapter "lgtv" : 1.1.6 Adapter "lgtv-rs" : 0.1.0 Adapter "lgtv11" : 1.0.5 Adapter "lifx" : 0.1.1 Adapter "lightify" : 0.2.16 Adapter "link" : 0.5.9 Adapter "linkeddevices" : 1.1.4 Adapter "logparser" : 0.4.11 Adapter "lovelace" : 1.1.0 Adapter "loxone" : 1.0.0 Adapter "luftdaten" : 0.0.15 Adapter "lupusec" : 1.2.7 Adapter "luxtronik1" : 0.2.3 Adapter "material" : 0.13.8 Adapter "maxcube" : 0.1.2 Adapter "maxcul" : 1.3.0 Adapter "mbus" : 2.2.0 Adapter "mclighting" : 0.1.1 Adapter "megad" : 1.2.1 Adapter "megadd" : 0.2.0 Adapter "megaesp" : 0.1.0 Adapter "mercedesme" : 0.0.21 Adapter "mercury" : 0.1.1 Adapter "meross" : 1.4.1 Adapter "meteoalarm" : 1.1.0 Adapter "midea" : 0.0.6 Adapter "miele" : 0.1.5 Adapter "mielecloudservice": 1.2.4 Adapter "mihome" : 1.3.0 Adapter "mihome-airpurifier": 0.1.8 Adapter "mihome-lamp" : 1.1.0 Adapter "mihome-plug" : 0.2.1 Adapter "mihome-vacuum" : 2.0.7 Adapter "miio" : 0.0.13 Adapter "mikrotik" : 1.0.12 Adapter "milight" : 0.3.6 Adapter "milight-smart-light": 0.6.0 Adapter "mobile" : 0.5.0 Adapter "modbus" : 3.1.3 Adapter "moma" : 1.2.6 Adapter "mpd" : 1.0.5 Adapter "mqtt" : 2.1.3 Adapter "mqtt-client" : 1.3.1 Adapter "multicast" : 0.1.5 Adapter "musiccast" : 0.1.3 Adapter "mydlink" : 1.1.2 Adapter "myq" : 0.1.1 Adapter "mysensors" : 2.0.1 Adapter "myvbus" : 0.0.6 Adapter "nanoleaf-lightpanels": 0.8.2 Adapter "nello" : 2.0.8 Adapter "netatmo" : 1.3.1 Adapter "nibeuplink" : 0.3.0 Adapter "nina" : 0.0.23 Adapter "node-red" : 1.17.2 Adapter "noolitef" : 0.0.2 Adapter "nuki" : 1.2.3 Adapter "nuki-extended" : 2.2.5 , installed 2.2.5 Adapter "nut" : 1.1.3 Adapter "octoprint" : 0.0.4 Adapter "odl" : 1.0.5 Adapter "oilfox" : 2.1.0 Adapter "onkyo" : 2.0.3 Adapter "onvif" : 0.4.3 Adapter "openhab" : 1.1.0 Adapter "openligadb" : 1.2.0 Adapter "opentherm" : 0.1.9 Adapter "openweathermap": 0.1.0 Adapter "opi" : 0.1.1 Adapter "oppoplayer" : 0.2.1 Adapter "owfs" : 0.6.4 Adapter "owntracks" : 0.6.3 Adapter "panasonic-viera": 1.0.2 Adapter "parser" : 1.0.7 Adapter "paw" : 0.3.2 Adapter "phantomjs" : 1.0.1 Adapter "pi-hole" : 1.2.3 Adapter "piface" : 1.0.0 Adapter "pimatic" : 0.3.0 Adapter "ping" : 1.4.7 Adapter "places" : 0.7.0 Adapter "plenticore" : 2.1.3 Adapter "plex" : 0.8.11 Adapter "plexconnect" : 0.0.7 Adapter "pollenflug" : 1.0.6 Adapter "primelab" : 1.0.2 Adapter "proxmox" : 1.0.2 Adapter "proxy" : 1.2.1 Adapter "pushbullet" : 0.0.11 Adapter "pushover" : 2.0.2 Adapter "pushsafer" : 0.1.8 Adapter "radar2" : 2.0.1 Adapter "radiohead" : 1.0.7 Adapter "rainbird" : 0.2.2 Adapter "rflink" : 2.1.5 Adapter "rickshaw" : 1.0.0 Adapter "ring" : 1.1.3 Adapter "roadtraffic" : 0.2.0 Adapter "robonect" : 0.1.3 Adapter "roomba" : 1.1.1 Adapter "rpi2" : 1.2.0 , installed 1.2.0 Adapter "rssfeed" : 0.0.28 Adapter "s7" : 1.1.8 Adapter "samsung" : 0.2.9 Adapter "sanext" : 0.0.4 Adapter "sayit" : 1.9.8 Adapter "sbfspot" : 3.0.0 Adapter "scenes" : 2.0.7 , installed 1.1.0 [Updateable] Adapter "schoolfree" : 0.6.2 Adapter "senec" : 1.0.9 Adapter "shelly" : 3.3.1 Adapter "shuttercontrol": 0.6.2 Adapter "sia" : 1.0.4 Adapter "siegenia" : 1.0.0 Adapter "simple-api" : 2.4.6 , installed 2.4.6 Adapter "sma-em" : 0.5.7 Adapter "smappee" : 0.2.2 Adapter "smartmeter" : 3.1.2 Adapter "snips" : 1.5.0 Adapter "snmp" : 0.5.0 Adapter "socketio" : 3.0.9 , installed 3.0.9 Adapter "solarlog" : 2.0.0 Adapter "solarviewdatareader": 0.2.1 Adapter "solarwetter" : 1.0.0 Adapter "sonnen" : 1.5.2 Adapter "sonoff" : 2.3.3 , installed 2.3.3 Adapter "sonos" : 2.1.0 , installed 2.1.0 Adapter "sonus" : 0.1.1 Adapter "sony-bravia" : 1.0.1 Adapter "sourceanalytix": 0.4.2 Adapter "spotify-premium": 1.0.0 Adapter "sql" : 1.13.1 Adapter "squeezebox" : 1.0.0 Adapter "squeezeboxrpc" : 1.2.1 Adapter "starline" : 1.0.0 Adapter "statistics" : 0.2.2 Adapter "stiebel-isg" : 1.4.11 Adapter "stockmarket" : 0.0.2 Adapter "sunnyportal" : 0.1.5 Adapter "swiss-weather-api": 0.2.0 Adapter "synology" : 0.1.18 Adapter "systeminfo" : 0.3.1 Adapter "tado" : 0.1.9 Adapter "tahoma" : 0.3.3 Adapter "tankerkoenig" : 2.0.9 Adapter "telegram" : 1.5.9 , installed 1.5.9 Adapter "terminal" : 0.1.2 Adapter "tesla-motors" : 0.2.3 Adapter "text2command" : 1.3.0 , installed 1.3.0 Adapter "tileboard" : 0.1.1 Adapter "tinker" : 1.1.0 Adapter "tino" : 0.1.3 Adapter "tinyrx4" : 0.1.5 Adapter "tr-064" : 4.0.7 Adapter "tradfri" : 2.6.3 Adapter "trashschedule" : 0.0.9 , installed 0.0.9 Adapter "tunnelbroker-endpoint-updater": 0.0.1 Adapter "tuya" : 3.3.5 Adapter "tvspielfilm" : 2.0.1 Adapter "unifi" : 0.5.5 Adapter "unifi-protect" : 0.0.11 Adapter "upnp" : 1.0.16 Adapter "vaillant" : 0.0.10 Adapter "valloxmv" : 1.0.3 Adapter "vcard" : 0.0.9 Adapter "vedirect" : 0.1.0 Adapter "velux" : 0.0.6 Adapter "viessmann" : 1.2.4 Adapter "viessmannapi" : 1.3.2 Adapter "virtualpowermeter": 1.2.1 Adapter "vis" : 1.2.6 , installed 1.2.6 Adapter "vis-bars" : 0.1.4 Adapter "vis-canvas-gauges": 0.1.5 Adapter "vis-colorpicker": 1.2.0 Adapter "vis-fancyswitch": 1.1.0 Adapter "vis-google-fonts": 0.1.0 Adapter "vis-history" : 1.0.0 Adapter "vis-hqwidgets" : 1.1.4 , installed 1.1.4 Adapter "vis-inventwo" : 1.3.8 Adapter "vis-jqui-mfd" : 1.0.12 Adapter "vis-justgage" : 1.0.2 Adapter "vis-keyboard" : 0.0.2 Adapter "vis-lcars" : 1.0.4 Adapter "vis-map" : 1.0.4 Adapter "vis-material" : 0.1.3 Adapter "vis-material-webfont": 0.0.3 Adapter "vis-materialdesign": 0.3.14 Adapter "vis-metro" : 1.1.2 Adapter "vis-players" : 0.1.6 Adapter "vis-plumb" : 1.0.2 Adapter "vis-rgraph" : 0.0.2 Adapter "vis-timeandweather": 1.1.7 Adapter "vis-weather" : 2.5.2 Adapter "vodafone-speedtest": 0.0.5 Adapter "volvo" : 0.0.2 Adapter "vr200" : 1.0.0 Adapter "vw-connect" : 0.0.16 Adapter "weatherunderground": 3.2.1 Adapter "web" : 3.0.9 , installed 3.0.9 Adapter "web-speedy" : 0.2.0 Adapter "weishaupt-wem" : 0.0.8 Adapter "wiffi-wz" : 2.2.0 Adapter "wifilight" : 1.1.0 Adapter "windows-control": 0.1.3 Adapter "wlanthermo-nano": 0.1.1 Adapter "wled" : 0.5.0 Adapter "wm-bus" : 0.3.1 Adapter "wolf" : 1.2.0 Adapter "worx" : 1.0.2 Adapter "xbox" : 0.6.5 Adapter "xs1" : 1.0.2 Adapter "yahka" : 0.11.0 Adapter "yamaha" : 0.3.19 Adapter "yeelight-2" : 1.0.3 Adapter "youtube" : 0.0.11 Adapter "yr" : 2.0.3 Adapter "zigbee" : 1.1.1 , installed 1.1.1 Adapter "zoneminder" : 0.3.3 Adapter "zont" : 0.5.4 Adapter "zwave" : 2.0.1 Adapter "zwave2" : 1.3.3da ist auch nichts dabei was mein usb blockieren sollte.
lg
@gifftstaub
Deaktivier mal den 'discovery' Adapter. Soweit ich weiß fragt der auch den serialport an. -
@gifftstaub
Deaktivier mal den 'discovery' Adapter. Soweit ich weiß fragt der auch den serialport an.@Thomas-Braun said in Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5:
@gifftstaub
Deaktivier mal den 'discovery' Adapter. Soweit ich weiß fragt der auch den serialport an.nein das liegt nicht am 'discovery' Adapter Serial ist nicht angehackt.
lg
Edit: Morgen kommt ein neuer USB Stick bericht folgt.
-
Nabend Zusammen,
Kurzes Feedback zum Porblem mit dem CC2531 Stick.
Alte Stick ist Platt keine Ahnung wie das Passiert ist.
Neuer Stick ran und siehe da läuft Sofort mit Adapter ( Zigbee 1.1.1 ) und folgende Komponenten.
JS controller: 3.1.5 Node : v12.18.0 Node.js: v12.18.0 NPM: 6.14.4Ich möchte mich bei allem sehr bedanken für die Hilfestellung :+1:
lg
-
Ich kann neuerdings meine Zigbee-Geräte nicht mehr steuern. In den Objekten werden auch falsche Angaben gemacht bez. ein/aus, Temperatur etc.
Am System oder Adapter habe ich nichts verändert! Da Neustarts etc. nichts gebracht haben, habe ich dann von Github die neueste Version gezogen - hat aber auch nichts gebracht.
Hier das Log, wenn ich versuche, mein Arbeitszimmerlicht zu schalten:
zigbee.0 2020-06-17 22:35:45.628 error (10296) Error on send command to 0x00158d0003cefef4. Error: Error: Command 0x00158d0003cefef4/1 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0,"s zigbee.0 2020-06-17 22:35:41.258 error at rejected (C:\ioBroker\Zuhause\node_modules\zigbee-herdsman\dist\controller\model\endpoint.js:6:65) zigbee.0 2020-06-17 22:35:41.258 error at Generator.throw (<anonymous>) zigbee.0 2020-06-17 22:35:41.258 error at Endpoint.<anonymous> (C:\ioBroker\Zuhause\node_modules\zigbee-herdsman\dist\controller\model\endpoint.js:365:23) zigbee.0 2020-06-17 22:35:41.258 error (10296) Error on send command to 0x00158d0003cefef4. Error: Error: Command 0x00158d0003cefef4/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0, fritzdect.0 2020-06-17 22:35:15.828 warn (12152) DECT200_34:31:C4:D3:D6:E3 is not present, check the device connection, no values are writtenWäre toll, wenn mir jemand helfen könnte!
-
Ich kann neuerdings meine Zigbee-Geräte nicht mehr steuern. In den Objekten werden auch falsche Angaben gemacht bez. ein/aus, Temperatur etc.
Am System oder Adapter habe ich nichts verändert! Da Neustarts etc. nichts gebracht haben, habe ich dann von Github die neueste Version gezogen - hat aber auch nichts gebracht.
Hier das Log, wenn ich versuche, mein Arbeitszimmerlicht zu schalten:
zigbee.0 2020-06-17 22:35:45.628 error (10296) Error on send command to 0x00158d0003cefef4. Error: Error: Command 0x00158d0003cefef4/1 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0,"s zigbee.0 2020-06-17 22:35:41.258 error at rejected (C:\ioBroker\Zuhause\node_modules\zigbee-herdsman\dist\controller\model\endpoint.js:6:65) zigbee.0 2020-06-17 22:35:41.258 error at Generator.throw (<anonymous>) zigbee.0 2020-06-17 22:35:41.258 error at Endpoint.<anonymous> (C:\ioBroker\Zuhause\node_modules\zigbee-herdsman\dist\controller\model\endpoint.js:365:23) zigbee.0 2020-06-17 22:35:41.258 error (10296) Error on send command to 0x00158d0003cefef4. Error: Error: Command 0x00158d0003cefef4/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0, fritzdect.0 2020-06-17 22:35:15.828 warn (12152) DECT200_34:31:C4:D3:D6:E3 is not present, check the device connection, no values are writtenWäre toll, wenn mir jemand helfen könnte!
@P-A-L-A-D-I-N
ggf. ein COM Port Problem? Hatte ich auch nach nodesjs Update auf 12.18 mit rflink.npm rebuild gemacht bzw.
npm install serialport --build-from-source? -
@P-A-L-A-D-I-N
ggf. ein COM Port Problem? Hatte ich auch nach nodesjs Update auf 12.18 mit rflink.npm rebuild gemacht bzw.
npm install serialport --build-from-source?@JB_Sullivan sagte in Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5:
npm install serialport --build-from-source
Hat leider nichts gebracht! Ich mache jetzt aber mal sicherheitshalber noch einen Neustart und schaue dann nochmal.
EDIT: Neustart hat auch nichts gebracht. Scheinbar besteht keine Verbindung mehr zu den Zigbee-Geräten, obwohl der Port stimmt. In der Übersicht bei "Netzwerkkarte" ist auch alles auf rot und es sind keinerlei Verbindungen mehr zu den Geräten eingezeichnet.
-
Das Aus- und Einstecken des USB-Adapters hat kurzzeitig geholfen - die Geräte waren in der Übersicht wieder zu sehen. Allerdings war die Freude nur von sehr, sehr kurzer Dauer. Jetzt ist wieder alles weg...
Hier noch das Log des letzten Schaltversuchs:
zigbee.0 2020-06-19 11:53:55.434 error (19452) Error on send command to 0x00158d0003cefef4. Error: Error: Command 0x00158d0003cefef4/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0," zigbee.0 2020-06-19 11:53:51.065 error (19452) Error on send command to 0x00158d0003cefef4. Error: Error: Command 0x00158d0003cefef4/1 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0,"s zigbee.0 2020-06-19 11:53:25.956 error at rejected (C:\ioBroker\Zuhause\node_modules\zigbee-herdsman\dist\controller\model\endpoint.js:6:65)) zigbee.0 2020-06-19 11:53:25.956 error at Generator.throw (<anonymous>) zigbee.0 2020-06-19 11:53:25.956 error at Endpoint.<anonymous> (C:\ioBroker\Zuhause\node_modules\zigbee-herdsman\dist\controller\model\endpoint.js:255:23) zigbee.0 2020-06-19 11:53:25.956 error (19452) Failed to configure 0x000d6f000fabe64e COSensor-EM, attempt 1 (Error: Bind 0x000d6f000fabe64e/1 genPowerCfg from '0x00124b0018e20893/1' failed (Error: AREQ - ZDO - bindRsp after 10000ms) zigbee.0 2020-06-19 11:53:15.837 info (19452) Zigbee started zigbee.0 2020-06-19 11:53:15.837 info (19452) 0x00158d0003cefef4 (addr 33236): LLKZMK11LM - Xiaomi Aqara wireless relay controller (Router) zigbee.0 2020-06-19 11:53:15.835 info (19452) 0x000d6f000fabe64e (addr 36585): HS1CA-E - HEIMAN Smart carbon monoxide sensor (EndDevice) zigbee.0 2020-06-19 11:53:15.834 info (19452) 0x00158d000340d5ad (addr 663): JTQJ-BF-01LM/BW - Xiaomi MiJia gas leak detector (Router) zigbee.0 2020-06-19 11:53:15.833 info (19452) 0x7cb03eaa0a01e0f8 (addr 58413): AB3257001NJ - OSRAM Smart+ plug (Router) zigbee.0 2020-06-19 11:53:15.832 info (19452) 0x7cb03eaa0a01bfef (addr 53682): AB3257001NJ - OSRAM Smart+ plug (Router) zigbee.0 2020-06-19 11:53:15.831 info (19452) 0x84182600000f3893 (addr 44117): AB3257001NJ - OSRAM Smart+ plug (Router) zigbee.0 2020-06-19 11:53:15.830 info (19452) 0x00158d00036b9140 (addr 15766): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2020-06-19 11:53:15.829 info (19452) 0x00158d00032300c0 (addr 12784): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2020-06-19 11:53:15.828 info (19452) 0x00158d000349c4d0 (addr 4916): WSDCGQ11LM - Xiaomi Aqara temperature, humidity and pressure sensor (EndDevice) zigbee.0 2020-06-19 11:53:15.824 info (19452) Configuring 0x000d6f000fabe64e COSensor-EM zigbee.0 2020-06-19 11:53:15.818 info (19452) Currently 9 devices are joined: zigbee.0 2020-06-19 11:53:15.764 info (19452) --> transmitPower : normal zigbee.0 2020-06-19 11:53:15.740 info (19452) Disable LED zigbee.0 2020-06-19 11:53:15.689 info (19452) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190425}} zigbee.0 2020-06-19 11:53:13.296 info (19452) Starting Zigbee... zigbee.0 2020-06-19 11:53:13.237 info (19452) starting. Version 1.1.1 in C:/ioBroker/Zuhause/node_modules/iobroker.zigbee, node: v12.18.0, js-controller: 3.1.4 -
Noch ein Nachtrag (wegen der Übersichtlichkeit als getrennter Beitrag):
In der Übersicht des Adapters ("Netzwerkkarte") waren die Geräte zwischenzeitlich, auch ohne Aus- und Einstecken des USB-Sticks, wieder grün und um den Coordinator herum versammelt. Aber: Das Licht läßt sich trotzdem, auch in diesem Zustand, nicht schalten.
Hier noch das Log des Schaltversuchs (im o.g. Zustand mit grünen Verbindungen in der Übersicht):
info.0 2020-06-19 13:14:30.839 info (11556) Popup news was read... zigbee.0 2020-06-19 13:14:21.861 error (19452) Error on send command to 0x00158d0003cefef4. Error: Error: Command 0x00158d0003cefef4/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0," zigbee.0 2020-06-19 13:14:17.316 error at rejected (C:\ioBroker\Zuhause\node_modules\zigbee-herdsman\dist\controller\model\endpoint.js:6:65) zigbee.0 2020-06-19 13:14:17.316 error at Generator.throw (<anonymous>) zigbee.0 2020-06-19 13:14:17.316 error at Endpoint.<anonymous> (C:\ioBroker\Zuhause\node_modules\zigbee-herdsman\dist\controller\model\endpoint.js:365:23) zigbee.0 2020-06-19 13:14:17.316 error (19452) Error on send command to 0x00158d0003cefef4. Error: Error: Command 0x00158d0003cefef4/1 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0," info.0 2020-06-19 12:44:30.904 info (11556) Popup news was read...Es muß also irgendetwas mit diesem verfluchten JS- und Node-Gelump zu tun haben - wie eigentlich immer, wenn es mal wieder klemmt!
Keine Ahnung, warum die Entwickler des ioBroker nicht einfach mal eine stabile Version bestehen lassen und man da ständig irgendwas herumbasteln muß! Mich als einfachen Nutzer kotzt das alles jedenfalls einfach nur noch tierisch an! Ich möchte keine abgehobenen Schickimickisachen machen und auf Teufel komm raus den allerneusten "Controller XY, Node, NPM, WeißderTeufelwas" da stehen haben, sondern einfach nur ein stabiles, gerne auch "veraltetes", System betreiben, das solide seine Arbeit verrichtet! Es kann ja wohl nicht sein, daß ich alle zwei Wochen spätestens wieder stundenlang dasitze und auf Fehlersuche gehen muß, nur weil wieder irgendein verk... Update (wohlgemerkt auf "default", nicht auf "latest") alles zerschossen hat und meine ganze Beleuchtung oder irgendein anderes Zeug dann nicht mehr funktioniert! :imp: -
Noch ein Nachtrag (wegen der Übersichtlichkeit als getrennter Beitrag):
In der Übersicht des Adapters ("Netzwerkkarte") waren die Geräte zwischenzeitlich, auch ohne Aus- und Einstecken des USB-Sticks, wieder grün und um den Coordinator herum versammelt. Aber: Das Licht läßt sich trotzdem, auch in diesem Zustand, nicht schalten.
Hier noch das Log des Schaltversuchs (im o.g. Zustand mit grünen Verbindungen in der Übersicht):
info.0 2020-06-19 13:14:30.839 info (11556) Popup news was read... zigbee.0 2020-06-19 13:14:21.861 error (19452) Error on send command to 0x00158d0003cefef4. Error: Error: Command 0x00158d0003cefef4/1 genOnOff.off({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0," zigbee.0 2020-06-19 13:14:17.316 error at rejected (C:\ioBroker\Zuhause\node_modules\zigbee-herdsman\dist\controller\model\endpoint.js:6:65) zigbee.0 2020-06-19 13:14:17.316 error at Generator.throw (<anonymous>) zigbee.0 2020-06-19 13:14:17.316 error at Endpoint.<anonymous> (C:\ioBroker\Zuhause\node_modules\zigbee-herdsman\dist\controller\model\endpoint.js:365:23) zigbee.0 2020-06-19 13:14:17.316 error (19452) Error on send command to 0x00158d0003cefef4. Error: Error: Command 0x00158d0003cefef4/1 genOnOff.on({}, {"timeout":10000,"disableResponse":false,"disableDefaultResponse":false,"direction":0," info.0 2020-06-19 12:44:30.904 info (11556) Popup news was read...Es muß also irgendetwas mit diesem verfluchten JS- und Node-Gelump zu tun haben - wie eigentlich immer, wenn es mal wieder klemmt!
Keine Ahnung, warum die Entwickler des ioBroker nicht einfach mal eine stabile Version bestehen lassen und man da ständig irgendwas herumbasteln muß! Mich als einfachen Nutzer kotzt das alles jedenfalls einfach nur noch tierisch an! Ich möchte keine abgehobenen Schickimickisachen machen und auf Teufel komm raus den allerneusten "Controller XY, Node, NPM, WeißderTeufelwas" da stehen haben, sondern einfach nur ein stabiles, gerne auch "veraltetes", System betreiben, das solide seine Arbeit verrichtet! Es kann ja wohl nicht sein, daß ich alle zwei Wochen spätestens wieder stundenlang dasitze und auf Fehlersuche gehen muß, nur weil wieder irgendein verk... Update (wohlgemerkt auf "default", nicht auf "latest") alles zerschossen hat und meine ganze Beleuchtung oder irgendein anderes Zeug dann nicht mehr funktioniert! :imp:@P-A-L-A-D-I-N also an der node12 liegts nicht.. allerdings auf Linux
@P-A-L-A-D-I-N sagte in Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5:
Mich als einfachen Nutzer kotzt das alles jedenfalls einfach nur noch tierisch an! Ich möchte keine abgehobenen Schickimickisachen machen und auf Teufel komm raus den allerneusten "Controller XY, Node, NPM, WeißderTeufelwas" da stehen haben, sondern einfach nur ein stabiles, gerne auch "veraltetes", System betreiben, das solide seine Arbeit verrichtet!
und wo ist das Problem.. hättest einfach alles so bestehen lassen wie es war.. also was regst dich auf ??
wenn dich das System so ankotzt.. es gibt genug käufliche Systeme wo du für Support bezahlst.. also WO IST DAS PROBLEMausserdem wen man mit BILLIG WARE, was du vor dir liegen hast laut dem Log
Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190425}}also ein CC2531 zusätzlich mit einer Firmware von April die ehhh kaputt war, da wir ein BUG hatten versuch ein System aufzubauen was stabil laufen soll.. na dann holla im Not..
also besorg dir erstmal ordentliche Hardware es gibt genug alternativen im Marktplatz
dann bringst dein System zum laufen und dann und NUR DANN wenns nicht läuft dann kannst du MICH UND NUR MICH wenns um Zigbee geht anpöbeln.. ansonsten erspare mir dein Palaver... -
An node 14 und js-controller 3.1.6 liegt es auch nicht (wiederum auf Linux):
2020-06-19 15:22:11.887 - info: host.brokerslave "system.adapter.zigbee.0" enabled 2020-06-19 15:22:11.995 - info: host.brokerslave instance system.adapter.zigbee.0 started with pid 19145 2020-06-19 15:22:16.343 - info: zigbee.0 (19145) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v14.4.0, js-controller: 3.1.6 2020-06-19 15:22:16.439 - info: zigbee.0 (19145) Starting Zigbee... 2020-06-19 15:22:17.021 - info: zigbee.0 (19145) Coordinator firmware version: {"type":"RaspBee","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":53,"maintrel":0,"revisio n":"0x26350500"}} 2020-06-19 15:22:17.227 - info: zigbee.0 (19145) Unable to disable LED, unsupported function. 2020-06-19 15:22:17.228 - info: zigbee.0 (19145) --> transmitPower : normal 2020-06-19 15:22:17.231 - info: zigbee.0 (19145) Unable to set transmit power, unsupported function. 2020-06-19 15:22:17.234 - info: zigbee.0 (19145) Currently no devices. 2020-06-19 15:22:17.236 - info: zigbee.0 (19145) Zigbee started -
An node 14 und js-controller 3.1.6 liegt es auch nicht (wiederum auf Linux):
2020-06-19 15:22:11.887 - info: host.brokerslave "system.adapter.zigbee.0" enabled 2020-06-19 15:22:11.995 - info: host.brokerslave instance system.adapter.zigbee.0 started with pid 19145 2020-06-19 15:22:16.343 - info: zigbee.0 (19145) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v14.4.0, js-controller: 3.1.6 2020-06-19 15:22:16.439 - info: zigbee.0 (19145) Starting Zigbee... 2020-06-19 15:22:17.021 - info: zigbee.0 (19145) Coordinator firmware version: {"type":"RaspBee","meta":{"transportrev":0,"product":0,"majorrel":38,"minorrel":53,"maintrel":0,"revisio n":"0x26350500"}} 2020-06-19 15:22:17.227 - info: zigbee.0 (19145) Unable to disable LED, unsupported function. 2020-06-19 15:22:17.228 - info: zigbee.0 (19145) --> transmitPower : normal 2020-06-19 15:22:17.231 - info: zigbee.0 (19145) Unable to set transmit power, unsupported function. 2020-06-19 15:22:17.234 - info: zigbee.0 (19145) Currently no devices. 2020-06-19 15:22:17.236 - info: zigbee.0 (19145) Zigbee started@Thomas-Braun das ist der cc2531 in Verbindung mit der Firmware vom April 2019
zigbee hab ich, zwave auch, nuc's genauso und HA auch
Support us
667
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge