UNSOLVED Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5
-
@M-A-X sagte in Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5:
rror: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'
hättest einfach nur den Adapter stoppen sollen.. Stick kurz raus .. wieder rein.. und adapter starten ...
fettisch währe die Laube
wenn du jetzt noch node12 hast dann must alle neu kompilliert werden.. der @serialport wird dann ewntuell zicken also musst du den löschen
rm -R /opt/iobroker/node_modules/@serialportund den Adapter neu von Git isntallieren
-
@arteck
Hey. Ich habe nodejs nur von 12.13 oder so auf 12.18 geupdatet. Da sollte das nicht nötig sein, oder?
Stoppen - raus - rein - starten probiere ich.
Musste ich früher nie machen. Hängt das mit 3.1.5 zusammen oder war bzw ist das Zufall? -
@M-A-X das hängt mit der Firmware und dem Adapter zusammen bzw. dessen Abhängikeit.. der js-controller hat damit nix zu tun
passiert halt..Software ändert sich
wenn du nur 12.13 oder so auf 12.18 geupdatet gemacht hast .. dann ist alles gut..
-
@M-A-X hab ich hin und wieder auch schon mal...aber eher selten (alle 2-4 Monate mal)
-
Adapter stoppen, abklemmen, anschließen, Adapter starten hilft.
Ich hatte das Problem bis gestern noch nie
dabei benutze ich den zigbee Stick schon bestimmt nen halbes Jahr. Deshalb hab ich gleich an das Update gedacht.
Danke fürs 'Mut machen' und die Ratschläge. -
Darf ich hier mal reingrätschen? Kann es sein, das die Seriell Port Problematik unter Node.js12.18 ALLE USB gekoppelten Geräte betrifft?
Ich habe nämlich auch mit 12.18 ein Problem mit rflink.
( https://forum.iobroker.net/topic/34318/rflink-nodejs12-18 )Gibt es da ggf. auch für Windows User ein Workaround?
-
@JB_Sullivan ne das was schon unter 8 auch so..
-
ich habe die gleichen probleme, keine Chance.
nodejs -v && which nodejs && node -v && which node && npm -v && which npm && apt policy nodejs v12.18.0 /usr/bin/nodejs v12.18.0 /usr/bin/node 6.14.4 /usr/bin/npm nodejs: Installiert: 12.18.0-1nodesource1 Installationskandidat: 12.18.0-1nodesource1 Versionstabelle: *** 12.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_12.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.21.0~dfsg-1~deb10u1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packageszigbee.0 2020-06-15 06:38:02.899 error at /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12 zigbee.0 2020-06-15 06:38:02.899 error at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-06-15 06:38:02.899 error at SerialPort.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49) zigbee.0 2020-06-15 06:38:02.899 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12) zigbee.0 2020-06-15 06:38:02.899 error at new Promise (<anonymous>) zigbee.0 2020-06-15 06:38:02.899 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71 zigbee.0 2020-06-15 06:38:02.899 error at Generator.next (<anonymous>) zigbee.0 2020-06-15 06:38:02.899 error at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32) zigbee.0 2020-06-15 06:38:02.899 error (19322) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-06-15 06:38:02.898 error (19322) Failed to start Zigbee zigbee.0 2020-06-15 06:38:02.655 info (19322) Starting Zigbee...komisch ist auch obwohl der COM-Anschlussname angegeben wurde kommt immer diese fehlermeldung.
ich hoffe es gibt dafür abhilfe.
lg
-
@gifftstaub hmm ok.. ich schau mal .. muss erst mein DEV auf node 12 bringen
-
Probiert habe ich auch mit sudo rm -R /opt/iobroker/node_modules/@serialport und ein npm install serialport --build-from-source
npm install serialport --build-from-source > @serialport/bindings@8.0.8 install /opt/iobroker/node_modules/iobroker.discovery/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/iobroker.discovery/node_modules/@serialport/bindings/build“ wird betreten CXX(target) Release/obj.target/bindings/src/serialport.o In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/serialport_unix.o In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: ../../../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/poller.o In file included from ../src/poller.cpp:1: ../../../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ CXX(target) Release/obj.target/bindings/src/serialport_linux.o SOLINK_MODULE(target) Release/obj.target/bindings.node COPY Release/bindings.node make: Verzeichnis „/opt/iobroker/node_modules/iobroker.discovery/node_modules/@serialport/bindings/build“ wird verlassen > @serialport/bindings@9.0.0 install /opt/iobroker/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird betreten CXX(target) Release/obj.target/bindings/src/serialport.o In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/serialport_unix.o In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/poller.o In file included from ../src/poller.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ CXX(target) Release/obj.target/bindings/src/serialport_linux.o SOLINK_MODULE(target) Release/obj.target/bindings.node COPY Release/bindings.node make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird verlassen > serialport@8.0.8 postinstall /opt/iobroker/node_modules/iobroker.discovery/node_modules/serialport > node thank-you.js Thank you for using serialport! If you rely on this package, please consider supporting our open collective: > https://opencollective.com/serialport/donate > serialport@9.0.0 postinstall /opt/iobroker/node_modules/serialport > node thank-you.js Thank you for using serialport! If you rely on this package, please consider supporting our open collective: > https://opencollective.com/serialport/donate npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.3 (node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.2 (node_modules/zigbee-herdsman-converters/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.2 (node_modules/zigbee-herdsman/node_modules/jest-haste-map/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.12 (node_modules/zigbee-herdsman/node_modules/fsevents): npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@1.2.12: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}) + serialport@9.0.0 added 31 packages from 3 contributors and updated 1 package in 50.316s 49 packages are looking for funding run `npm fund` for detailstrozdem die gleichen fehlermeldungen.
ich sehe gerade beim installieren des Adapters ergibt sich folgende Meldungen.
$ ./iobroker add zigbee --host raspberrypi NPM version: 6.14.5 npm install iobroker.zigbee@1.1.1 --loglevel error --prefix "/opt/iobroker" (System call) In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope:../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^/home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ../src/poller.cpp:1:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ host.raspberrypi install adapter zigbee upload [200] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/index_m.html index_m.html text/html upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_lightbar.png img/philips_hue_lightbar.png image/png upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lifecontrol_lamp.png img/lifecontrol_lamp.png image/png upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/jiawen.png img/jiawen.png image/png upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/iluminize_511_040.png img/iluminize_511_040.png image/png upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_led1837r5.PNG img/ikea_led1837r5.PNG image/png upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/hue_go.png img/hue_go.png image/png upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/gledopto_bulb.png img/gledopto_bulb.png image/png upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ewelink_MS01.png img/ewelink_MS01.png image/png upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_neutral1.png img/ctrl_neutral1.png image/png upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_switch.png img/aqara_switch.png image/png upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_numan_body_sensor.png img/aqara_numan_body_sensor.png image/png upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_curtain.png img/aqara_curtain.png image/png upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_bulb.png img/aqara_bulb.png image/png upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ZWLD-100.png img/ZWLD-100.png image/png upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TS0218.png img/TS0218.png image/png upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TS0215.png img/TS0215.png image/png upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LTW017.png img/LTW017.png image/png upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LTC015.png img/LTC015.png image/png upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LTC014.png img/LTC014.png image/png upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LCT002.png img/LCT002.png image/png upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Ikea_fyrtur.png img/Ikea_fyrtur.png image/png upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ.png img/DIYRuZ.png image/png upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Bitron_AV201021A.png img/Bitron_AV201021A.png image/png upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/AV2010_32.png img/AV2010_32.png image/png upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript host.raspberrypi object system.adapter.zigbee created/updated host.raspberrypi create instance zigbee host.raspberrypi object zigbee.0.info.groups created host.raspberrypi object zigbee.0.info.pairingMessage created host.raspberrypi object zigbee.0.info.pairingCountdown created host.raspberrypi object zigbee.0.info.pairingMode created host.raspberrypi object zigbee.0.info.connection created host.raspberrypi object zigbee.0.info created host.raspberrypi object system.adapter.zigbee.0.sigKill created host.raspberrypi object system.adapter.zigbee.0.eventLoopLag created host.raspberrypi object system.adapter.zigbee.0.outputCount created host.raspberrypi object system.adapter.zigbee.0.inputCount created host.raspberrypi object system.adapter.zigbee.0.uptime created host.raspberrypi object system.adapter.zigbee.0.memRss created host.raspberrypi object system.adapter.zigbee.0.memHeapTotal created host.raspberrypi object system.adapter.zigbee.0.memHeapUsed created host.raspberrypi object system.adapter.zigbee.0.cputime created host.raspberrypi object system.adapter.zigbee.0.cpu created host.raspberrypi object system.adapter.zigbee.0.compactMode created host.raspberrypi object system.adapter.zigbee.0.connected created host.raspberrypi object system.adapter.zigbee.0.alive created host.raspberrypi Set default value of zigbee.0.info.groups: host.raspberrypi Set default value of zigbee.0.info.pairingMessage: host.raspberrypi Set default value of zigbee.0.info.pairingCountdown: 0 host.raspberrypi Set default value of zigbee.0.info.pairingMode: false host.raspberrypi Set default value of zigbee.0.info.connection: false host.raspberrypi object system.adapter.zigbee.0 created process exited with code 0lg
-
Push
Ich habe nun folgendes gemacht.
pi@raspberrypi:/opt/iobroker/node_modules/serialport $ npm install --production > @serialport/bindings@8.0.8 install /opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild prebuild-install WARN install No prebuilt binaries found (target=12.18.0 runtime=node arch=arm libc= platform=linux) make: Verzeichnis „/opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings/build“ wird betreten CXX(target) Release/obj.target/bindings/src/serialport.o In file included from ../src/./serialport.h:6, from ../src/serialport.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/serialport_unix.o In file included from ../src/serialport.h:6, from ../src/serialport_unix.cpp:2: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/poller.o In file included from ../src/poller.cpp:1: ../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ CXX(target) Release/obj.target/bindings/src/serialport_linux.o SOLINK_MODULE(target) Release/obj.target/bindings.node COPY Release/bindings.node make: Verzeichnis „/opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings/build“ wird verlassen > serialport@8.0.8 postinstall /opt/iobroker/node_modules/serialport > node thank-you.js Thank you for using serialport! If you rely on this package, please consider supporting our open collective: > https://opencollective.com/serialport/donate npm notice created a lockfile as package-lock.json. You should commit this file. added 73 packages from 43 contributors and audited 78 packages in 16.172s 1 package is looking for funding run `npm fund` for details found 0 vulnerabilities pi@raspberrypi:/opt/iobroker/node_modules/serialport $ npm fund serialport@8.0.8 └─┬ https://github.com/sponsors/sindresorhus └── mimic-response@2.1.0liegt das Problem an der 12.18.0?
prebuild-install WARN install No prebuilt binaries found (target=12.18.0 runtime=node arch=arm libc= platform=linux)lg
-
@gifftstaub
Nein, mit 12.18.0 hat das grundsätzlich nichts zu tun, denn:pi@raspberrypi:/opt/iobroker $ nodejs -v v12.18.0 pi@raspberrypi:/opt/iobroker $ npm ls serialport iobroker.inst@2.0.3 /opt/iobroker ├─┬ iobroker.discovery@2.3.7 │ └── serialport@8.0.8 └─┬ iobroker.zigbee@1.1.1 └─┬ zigbee-herdsman@0.12.83 └── serialport@8.0.7 -
könnte der Stick defekt sein?
pi@raspberrypi:/opt/iobroker $ npm ls serialport iobroker.inst@2.0.3 /opt/iobroker ├─┬ iobroker.discovery@2.3.7 │ └── serialport@8.0.8 └─┬ iobroker.zigbee@1.0.0 └─┬ zigbee-herdsman@0.12.95 └── serialport@8.0.7lg
-
@gifftstaub
Hast du eigentlich im Raspberry auch den Serialport insudo raspi-configaktiviert?
Geht unter 5 - P6 - No - Yes
-
eingentlich ja am serialport war ich nocch nie dran.
ich habe das mal proformer gemacht wie du beschrieben hast, nach einem reboot immer noch die gleichen Meldungen.
zigbee.0 2020-06-16 14:21:14.793 error at /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12 zigbee.0 2020-06-16 14:21:14.793 error at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14) zigbee.0 2020-06-16 14:21:14.793 error at SerialPort.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49) zigbee.0 2020-06-16 14:21:14.793 error at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12) zigbee.0 2020-06-16 14:21:14.793 error at new Promise (<anonymous>) zigbee.0 2020-06-16 14:21:14.793 error at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71 zigbee.0 2020-06-16 14:21:14.793 error at Generator.next (<anonymous>) zigbee.0 2020-06-16 14:21:14.793 error at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32) zigbee.0 2020-06-16 14:21:14.793 error (2686) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port' zigbee.0 2020-06-16 14:21:14.792 error (2686) Failed to start Zigbee zigbee.0 2020-06-16 14:21:14.554 info (2686) Starting Zigbee...lg
-
@gifftstaub sagte in Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5:
zigbee.0 2020-06-16 14:21:14.793 error (2686) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'
Da greift wohl schon irgendwas anderes drauf zu. Hast du noch deConz parallel laufen?
-
nein nur zigbee
-
liste der Installierten Adapter
Used repository: latest hash unchanged, use cached sources update done Adapter "accuweather" : 1.1.3 Adapter "admin" : 4.1.1 , installed 4.1.1 Adapter "alarm" : 0.7.5 Adapter "alexa2" : 3.1.2 , installed 3.1.2 Adapter "alpha2" : 1.0.0 Adapter "amazon-dash" : 1.1.0 Adapter "artnet" : 1.2.2 Adapter "asterisk" : 1.0.6 Adapter "asuswrt" : 1.0.1 Adapter "b-control-em" : 0.2.1 Adapter "backitup" : 1.5.8 , installed 1.5.8 Adapter "beckhoff" : 1.2.2 Adapter "benq" : 0.2.2 Adapter "binance" : 1.1.2 Adapter "ble" : 0.11.6 Adapter "blink4home" : 0.1.1 Adapter "bmw" : 1.4.0 Adapter "boblight" : 0.0.1 Adapter "bosesoundtouch": 0.9.2 Adapter "botvac" : 1.0.0 Adapter "bring" : 1.7.2 Adapter "broadlink2" : 2.0.3 Adapter "bsblan" : 0.1.2 Adapter "bshb" : 0.1.10 Adapter "calendar" : 1.2.0 Adapter "cameras" : 0.1.2 Adapter "chromecast" : 2.3.1 Adapter "cloud" : 3.0.3 Adapter "comfoair" : 1.1.1 Adapter "contact" : 1.1.3 Adapter "contactid" : 1.0.0 Adapter "coronavirus-statistics": 0.5.9 Adapter "corrently" : 0.0.2 Adapter "countdown" : 1.1.0 Adapter "cul" : 1.2.1 Adapter "daikin" : 1.0.5 Adapter "daswetter" : 3.0.1 Adapter "deconz" : 1.3.9 Adapter "denon" : 1.7.7 Adapter "devices" : 0.3.6 Adapter "digitalstrom" : 2.0.5 Adapter "discovergy" : 0.5.4 Adapter "discovery" : 2.3.7 , installed 2.3.7 Adapter "doorbird" : 0.1.5 Adapter "ds18b20" : 1.1.4 Adapter "dwd" : 2.4.10 Adapter "ebus" : 2.0.0 Adapter "ecovacs-deebot": 1.0.3 Adapter "egigeozone" : 0.1.2 Adapter "ekey" : 1.1.0 Adapter "email" : 1.0.7 , installed 1.0.7 Adapter "emby" : 1.0.2 Adapter "energymanager" : 1.2.2 Adapter "enet" : 1.0.1 Adapter "epson_stylus_px830": 0.2.1 Adapter "exchangerates" : 0.0.13 Adapter "fakeroku" : 0.2.1 Adapter "fb-checkpresence": 1.0.3 Adapter "feiertage" : 1.0.19 Adapter "fhem" : 1.5.2 Adapter "find-my-iphone": 0.2.17 Adapter "firetv" : 1.0.0 Adapter "fitbit-api" : 0.1.1 Adapter "flot" : 1.10.0 Adapter "foobar2000" : 2.0.3 Adapter "fritzbox" : 0.2.1 Adapter "fritzdect" : 0.3.2 Adapter "fronius" : 1.0.5 Adapter "fullcalendar" : 1.1.0 Adapter "fullybrowser" : 1.0.3 Adapter "g-homa" : 0.5.3 Adapter "geofency" : 0.3.2 Adapter "gruenbeck" : 0.0.18 Adapter "habpanel" : 0.4.1 Adapter "haier" : 1.0.3 Adapter "ham" : 1.1.2 Adapter "ham-wemo" : 1.0.1 Adapter "harmony" : 1.2.2 Adapter "hass-mqtt" : 0.0.7 Adapter "heatingcontrol": 0.5.6 Adapter "heytech" : 0.2.0 Adapter "hid" : 0.1.17 Adapter "hilink" : 0.2.7 Adapter "history" : 1.9.8 , installed 1.9.8 Adapter "hm-rega" : 2.6.14 Adapter "hm-rpc" : 1.14.10 Adapter "hmip" : 1.0.1 Adapter "hombot" : 0.1.3 Adapter "homeconnect" : 0.0.30 Adapter "homee" : 1.0.7 Adapter "homepilot" : 1.1.4 Adapter "hp-ilo" : 1.0.5 Adapter "hs100" : 2.0.0 Adapter "hue" : 3.3.5 Adapter "hue-extended" : 1.3.2 Adapter "hyperion" : 0.0.9 Adapter "i2c" : 0.0.6 Adapter "ical" : 1.7.0 , installed 1.7.0 Adapter "icons-addictive-flavour-png": 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0 Adapter "icons-icons8" : 0.0.1 Adapter "icons-material-png": 0.1.0 Adapter "icons-material-svg": 0.1.0 Adapter "icons-mfd-png" : 1.0.2 Adapter "icons-mfd-svg" : 1.0.2 Adapter "icons-open-icon-library-png": 0.1.2 Adapter "icons-ultimate-png": 1.0.1 Adapter "influxdb" : 1.8.6 Adapter "info" : 1.7.5 , installed 1.7.5 Adapter "innogy-smarthome": 0.3.4 Adapter "intesishome" : 0.1.2 Adapter "iogo" : 0.5.10 Adapter "iot" : 1.5.3 , installed 1.5.3 Adapter "iqontrol" : 1.1.0 , installed 1.1.0 Adapter "javascript" : 4.6.17 , installed 4.6.17 Adapter "jeelink" : 0.1.3 Controller "js-controller" : 3.1.5 , installed 3.1.5 Adapter "js2fs" : 0.1.5 Adapter "kecontact" : 0.1.0 Adapter "klf200" : 0.9.5 Adapter "km200" : 2.0.3 Adapter "knmi-weather" : 0.2.0 Adapter "knx" : 1.0.41 Adapter "kodi" : 2.0.4 Adapter "kress" : 2.5.5 Adapter "lametric" : 0.0.9 Adapter "landroid" : 1.0.3 Adapter "lcn" : 0.6.3 Adapter "legrand-ecocompteur": 0.0.4 Adapter "letrika_comgw" : 0.0.5 Adapter "lgtv" : 1.1.6 Adapter "lgtv-rs" : 0.1.0 Adapter "lgtv11" : 1.0.5 Adapter "lifx" : 0.1.1 Adapter "lightify" : 0.2.16 Adapter "link" : 0.5.9 Adapter "linkeddevices" : 1.1.4 Adapter "logparser" : 0.4.11 Adapter "lovelace" : 1.1.0 Adapter "loxone" : 1.0.0 Adapter "luftdaten" : 0.0.15 Adapter "lupusec" : 1.2.7 Adapter "luxtronik1" : 0.2.3 Adapter "material" : 0.13.8 Adapter "maxcube" : 0.1.2 Adapter "maxcul" : 1.3.0 Adapter "mbus" : 2.2.0 Adapter "mclighting" : 0.1.1 Adapter "megad" : 1.2.1 Adapter "megadd" : 0.2.0 Adapter "megaesp" : 0.1.0 Adapter "mercedesme" : 0.0.21 Adapter "mercury" : 0.1.1 Adapter "meross" : 1.4.1 Adapter "meteoalarm" : 1.1.0 Adapter "midea" : 0.0.6 Adapter "miele" : 0.1.5 Adapter "mielecloudservice": 1.2.4 Adapter "mihome" : 1.3.0 Adapter "mihome-airpurifier": 0.1.8 Adapter "mihome-lamp" : 1.1.0 Adapter "mihome-plug" : 0.2.1 Adapter "mihome-vacuum" : 2.0.7 Adapter "miio" : 0.0.13 Adapter "mikrotik" : 1.0.12 Adapter "milight" : 0.3.6 Adapter "milight-smart-light": 0.6.0 Adapter "mobile" : 0.5.0 Adapter "modbus" : 3.1.3 Adapter "moma" : 1.2.6 Adapter "mpd" : 1.0.5 Adapter "mqtt" : 2.1.3 Adapter "mqtt-client" : 1.3.1 Adapter "multicast" : 0.1.5 Adapter "musiccast" : 0.1.3 Adapter "mydlink" : 1.1.2 Adapter "myq" : 0.1.1 Adapter "mysensors" : 2.0.1 Adapter "myvbus" : 0.0.6 Adapter "nanoleaf-lightpanels": 0.8.2 Adapter "nello" : 2.0.8 Adapter "netatmo" : 1.3.1 Adapter "nibeuplink" : 0.3.0 Adapter "nina" : 0.0.23 Adapter "node-red" : 1.17.2 Adapter "noolitef" : 0.0.2 Adapter "nuki" : 1.2.3 Adapter "nuki-extended" : 2.2.5 , installed 2.2.5 Adapter "nut" : 1.1.3 Adapter "octoprint" : 0.0.4 Adapter "odl" : 1.0.5 Adapter "oilfox" : 2.1.0 Adapter "onkyo" : 2.0.3 Adapter "onvif" : 0.4.3 Adapter "openhab" : 1.1.0 Adapter "openligadb" : 1.2.0 Adapter "opentherm" : 0.1.9 Adapter "openweathermap": 0.1.0 Adapter "opi" : 0.1.1 Adapter "oppoplayer" : 0.2.1 Adapter "owfs" : 0.6.4 Adapter "owntracks" : 0.6.3 Adapter "panasonic-viera": 1.0.2 Adapter "parser" : 1.0.7 Adapter "paw" : 0.3.2 Adapter "phantomjs" : 1.0.1 Adapter "pi-hole" : 1.2.3 Adapter "piface" : 1.0.0 Adapter "pimatic" : 0.3.0 Adapter "ping" : 1.4.7 Adapter "places" : 0.7.0 Adapter "plenticore" : 2.1.3 Adapter "plex" : 0.8.11 Adapter "plexconnect" : 0.0.7 Adapter "pollenflug" : 1.0.6 Adapter "primelab" : 1.0.2 Adapter "proxmox" : 1.0.2 Adapter "proxy" : 1.2.1 Adapter "pushbullet" : 0.0.11 Adapter "pushover" : 2.0.2 Adapter "pushsafer" : 0.1.8 Adapter "radar2" : 2.0.1 Adapter "radiohead" : 1.0.7 Adapter "rainbird" : 0.2.2 Adapter "rflink" : 2.1.5 Adapter "rickshaw" : 1.0.0 Adapter "ring" : 1.1.3 Adapter "roadtraffic" : 0.2.0 Adapter "robonect" : 0.1.3 Adapter "roomba" : 1.1.1 Adapter "rpi2" : 1.2.0 , installed 1.2.0 Adapter "rssfeed" : 0.0.28 Adapter "s7" : 1.1.8 Adapter "samsung" : 0.2.9 Adapter "sanext" : 0.0.4 Adapter "sayit" : 1.9.8 Adapter "sbfspot" : 3.0.0 Adapter "scenes" : 2.0.7 , installed 1.1.0 [Updateable] Adapter "schoolfree" : 0.6.2 Adapter "senec" : 1.0.9 Adapter "shelly" : 3.3.1 Adapter "shuttercontrol": 0.6.2 Adapter "sia" : 1.0.4 Adapter "siegenia" : 1.0.0 Adapter "simple-api" : 2.4.6 , installed 2.4.6 Adapter "sma-em" : 0.5.7 Adapter "smappee" : 0.2.2 Adapter "smartmeter" : 3.1.2 Adapter "snips" : 1.5.0 Adapter "snmp" : 0.5.0 Adapter "socketio" : 3.0.9 , installed 3.0.9 Adapter "solarlog" : 2.0.0 Adapter "solarviewdatareader": 0.2.1 Adapter "solarwetter" : 1.0.0 Adapter "sonnen" : 1.5.2 Adapter "sonoff" : 2.3.3 , installed 2.3.3 Adapter "sonos" : 2.1.0 , installed 2.1.0 Adapter "sonus" : 0.1.1 Adapter "sony-bravia" : 1.0.1 Adapter "sourceanalytix": 0.4.2 Adapter "spotify-premium": 1.0.0 Adapter "sql" : 1.13.1 Adapter "squeezebox" : 1.0.0 Adapter "squeezeboxrpc" : 1.2.1 Adapter "starline" : 1.0.0 Adapter "statistics" : 0.2.2 Adapter "stiebel-isg" : 1.4.11 Adapter "stockmarket" : 0.0.2 Adapter "sunnyportal" : 0.1.5 Adapter "swiss-weather-api": 0.2.0 Adapter "synology" : 0.1.18 Adapter "systeminfo" : 0.3.1 Adapter "tado" : 0.1.9 Adapter "tahoma" : 0.3.3 Adapter "tankerkoenig" : 2.0.9 Adapter "telegram" : 1.5.9 , installed 1.5.9 Adapter "terminal" : 0.1.2 Adapter "tesla-motors" : 0.2.3 Adapter "text2command" : 1.3.0 , installed 1.3.0 Adapter "tileboard" : 0.1.1 Adapter "tinker" : 1.1.0 Adapter "tino" : 0.1.3 Adapter "tinyrx4" : 0.1.5 Adapter "tr-064" : 4.0.7 Adapter "tradfri" : 2.6.3 Adapter "trashschedule" : 0.0.9 , installed 0.0.9 Adapter "tunnelbroker-endpoint-updater": 0.0.1 Adapter "tuya" : 3.3.5 Adapter "tvspielfilm" : 2.0.1 Adapter "unifi" : 0.5.5 Adapter "unifi-protect" : 0.0.11 Adapter "upnp" : 1.0.16 Adapter "vaillant" : 0.0.10 Adapter "valloxmv" : 1.0.3 Adapter "vcard" : 0.0.9 Adapter "vedirect" : 0.1.0 Adapter "velux" : 0.0.6 Adapter "viessmann" : 1.2.4 Adapter "viessmannapi" : 1.3.2 Adapter "virtualpowermeter": 1.2.1 Adapter "vis" : 1.2.6 , installed 1.2.6 Adapter "vis-bars" : 0.1.4 Adapter "vis-canvas-gauges": 0.1.5 Adapter "vis-colorpicker": 1.2.0 Adapter "vis-fancyswitch": 1.1.0 Adapter "vis-google-fonts": 0.1.0 Adapter "vis-history" : 1.0.0 Adapter "vis-hqwidgets" : 1.1.4 , installed 1.1.4 Adapter "vis-inventwo" : 1.3.8 Adapter "vis-jqui-mfd" : 1.0.12 Adapter "vis-justgage" : 1.0.2 Adapter "vis-keyboard" : 0.0.2 Adapter "vis-lcars" : 1.0.4 Adapter "vis-map" : 1.0.4 Adapter "vis-material" : 0.1.3 Adapter "vis-material-webfont": 0.0.3 Adapter "vis-materialdesign": 0.3.14 Adapter "vis-metro" : 1.1.2 Adapter "vis-players" : 0.1.6 Adapter "vis-plumb" : 1.0.2 Adapter "vis-rgraph" : 0.0.2 Adapter "vis-timeandweather": 1.1.7 Adapter "vis-weather" : 2.5.2 Adapter "vodafone-speedtest": 0.0.5 Adapter "volvo" : 0.0.2 Adapter "vr200" : 1.0.0 Adapter "vw-connect" : 0.0.16 Adapter "weatherunderground": 3.2.1 Adapter "web" : 3.0.9 , installed 3.0.9 Adapter "web-speedy" : 0.2.0 Adapter "weishaupt-wem" : 0.0.8 Adapter "wiffi-wz" : 2.2.0 Adapter "wifilight" : 1.1.0 Adapter "windows-control": 0.1.3 Adapter "wlanthermo-nano": 0.1.1 Adapter "wled" : 0.5.0 Adapter "wm-bus" : 0.3.1 Adapter "wolf" : 1.2.0 Adapter "worx" : 1.0.2 Adapter "xbox" : 0.6.5 Adapter "xs1" : 1.0.2 Adapter "yahka" : 0.11.0 Adapter "yamaha" : 0.3.19 Adapter "yeelight-2" : 1.0.3 Adapter "youtube" : 0.0.11 Adapter "yr" : 2.0.3 Adapter "zigbee" : 1.1.1 , installed 1.1.1 Adapter "zoneminder" : 0.3.3 Adapter "zont" : 0.5.4 Adapter "zwave" : 2.0.1 Adapter "zwave2" : 1.3.3da ist auch nichts dabei was mein usb blockieren sollte.
lg
-
@gifftstaub
Deaktivier mal den 'discovery' Adapter. Soweit ich weiß fragt der auch den serialport an. -
@Thomas-Braun said in Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5:
@gifftstaub
Deaktivier mal den 'discovery' Adapter. Soweit ich weiß fragt der auch den serialport an.nein das liegt nicht am 'discovery' Adapter Serial ist nicht angehackt.
lg
Edit: Morgen kommt ein neuer USB Stick bericht folgt.
