UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[nieIP]

@Jan1 sagte in Neue Installationsroutine (für Linux):
Debian Buster nach Anleitung installieren, I

ok, danke, werde ist versuchen.
Warum Debian und nicht Raspbian ?

Das habe ich mir selbst beantworten können, weil Raspbian auf Debian aufbaut.

Reicht die "Lite" Version für ein ioBroker?

[Jan1]

@nieIP
Ok, beim Pi eben Raspian 😎
Lite ist ausreichend.

[marco-mh]

Hallo Leute, ich versuche schon seit Donnerstag den Iobroker auf einer QNAP TS251+ in der Linux Station unter Ubuntu 18.04 zu installieren.
ich habe mich eigentlich an die Anleitung gehalten. node und nodejs sind 10.7, rpm ist 6.11.3
ich bekomme folgende Ausgabe.

User iobroker created
Created /etc/sudoers.d/iobroker
chown: invalid group: ‘admin:admin’
Directory /opt/iobroker created
touch: cannot touch '/opt/iobroker/INSTALLER_INFO.txt': Permission denied
chmod: cannot access '/opt/iobroker/INSTALLER_INFO.txt': No such file or directory
bash: line 724: /opt/iobroker/INSTALLER_INFO.txt: Permission denied
bash: line 725: /opt/iobroker/INSTALLER_INFO.txt: Permission denied
bash: line 726: /opt/iobroker/INSTALLER_INFO.txt: Permission denied

==========================================================================
    Installing ioBroker (3/4)
==========================================================================

chown: invalid group: ‘admin:admin’
bash: line 746: /opt/iobroker/INSTALLER_INFO.txt: Permission denied
npm ERR! code EACCES
npm ERR! syscall access
npm ERR! path /opt/iobroker
npm ERR! errno -13
npm ERR! Error: EACCES: permission denied, access '/opt/iobroker'
npm ERR!  { [Error: EACCES: permission denied, access '/opt/iobroker']
npm ERR!   stack: 'Error: EACCES: permission denied, access \'/opt/iobroker\'',
npm ERR!   errno: -13,
npm ERR!   code: 'EACCES',
npm ERR!   syscall: 'access',
npm ERR!   path: '/opt/iobroker' }
npm ERR! 
npm ERR! The operation was rejected by your operating system.
npm ERR! It is likely you do not have the permissions to access this file as the current user
npm ERR! 
npm ERR! If you believe this might be a permissions issue, please double-check the
npm ERR! permissions of the file and its containing directories, or try running
npm ERR! the command again as root/Administrator.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/admin/.npm/_logs/2019-11-29T11_42_35_030Z-debug.log

==========================================================================
    Finalizing installation (4/4)
==========================================================================

bash: line 772: /opt/iobroker/INSTALLER_INFO.txt: Permission denied
Enabling autostart...
Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → /lib/systemd/system/iobroker.service.
Autostart enabled!
bash: line 947: /opt/iobroker/INSTALLER_INFO.txt: Permission denied
Fixing directory permissions...
This system does not support setting default permissions.
Do not use npm to manually install adapters unless you know what you are doing!
main: line 551: /opt/iobroker/INSTALLER_INFO.txt: Permission denied
main: line 272: return: 192.168.178.10: numeric argument required

==========================================================================

    ioBroker was installed successfully
    Open http://:8081 in a browser and start configuring!

==========================================================================


You need to re-login before doing anything else on the console!

unter 16.04 in der Linux Station funktioniert es wunderbar.

danke für eure hilfe und Gruß Marco

[apollon77]

@marco-mh Naja qnap ist halt leider kein echtes Linux sondern "custom" ... :-( @AlCalzone

[marco-mh]

Hab ich also keine Chance?
schade, unter 16.04 gehts
aber danke

[AlCalzone]

@marco-mh Ich bräuchte etwas mehr Infos über den User mit dem du angemeldet bist. Wie heißt dessen Gruppe? Normalerweise heißt die Gruppe wie der User.

Als "echter" root sollte es gehen, aber dann bekommt admin keinen Zugriff aufs ioBroker-Verzeichnis.

[marco-mh]

Ich hab es hinbekommen. Allerdings habe ich nicht die Linux Station genommen sondern hab eine Linux VM auf der QNAP installiert.
Danke für die Hilfe

[mpa]

Hallo,

ich versuche gerade iobroker auf einer VM mit Ubuntu LTS 18.04.3 zu installieren.
Mittlerweile habe ich jetzt mehrmals die Anleitung https://www.iobroker.net/#de/documentation/install/linux.md durchgeackert aber bekomme es leider nicht hin.

Beim Schritt "Installing ioBroker" bekomme ich immer folgende Fehlermeldungen:

==========================================================================
    Installing ioBroker (3/4)
==========================================================================

../src/unix_dgram.cc: In function ‘void {anonymous}::OnRecv({anonymous}::SocketContext*)’:
../src/unix_dgram.cc:121:25: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations]
                     argv);
                         ^
In file included from ../src/unix_dgram.cc:5:0:
../../nan/nan.h:1024:46: note: declared here
   NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback(
                                              ^~~~~~~~~~~~
../src/unix_dgram.cc: In function ‘void {anonymous}::OnWritable({anonymous}::SocketContext*)’:
../src/unix_dgram.cc:129:28: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprecated [-Wdeprecated-declarations]
                     0, NULL);
                            ^
In file included from ../src/unix_dgram.cc:5:0:
../../nan/nan.h:1024:46: note: declared here
   NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback(
                                              ^~~~~~~~~~~~
../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Socket(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/unix_dgram.cc:189:37: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   domain      = info[0]->Int32Value();
                                     ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/unix_dgram.cc:190:37: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   type        = info[1]->Int32Value();
                                     ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/unix_dgram.cc:191:37: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   protocol    = info[2]->Int32Value();
                                     ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Bind(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/unix_dgram.cc:230:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   fd = info[0]->Int32Value();
                            ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/unix_dgram.cc:231:33: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Local<v8::Value>)’ is deprecated: Use Isolate version [-Wdeprecated-declarations]
   String::Utf8Value path(info[1]);
                                 ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2892:28: note: declared here
                   explicit Utf8Value(Local<v8::Value> obj));
                            ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::SendTo(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/unix_dgram.cc:258:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   fd = info[0]->Int32Value();
                            ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/unix_dgram.cc:259:27: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   buf = info[1]->ToObject();
                           ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/node.h:63:0,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~
../src/unix_dgram.cc:260:33: warning: ‘uint32_t v8::Value::Uint32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   offset = info[2]->Uint32Value();
                                 ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2477:47: note: declared here
   V8_DEPRECATED("Use maybe version", uint32_t Uint32Value() const);
                                               ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/unix_dgram.cc:261:33: warning: ‘uint32_t v8::Value::Uint32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   length = info[3]->Uint32Value();
                                 ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2477:47: note: declared here
   V8_DEPRECATED("Use maybe version", uint32_t Uint32Value() const);
                                               ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/unix_dgram.cc:262:33: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Local<v8::Value>)’ is deprecated: Use Isolate version [-Wdeprecated-declarations]
   String::Utf8Value path(info[4]);
                                 ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2892:28: note: declared here
                   explicit Utf8Value(Local<v8::Value> obj));
                            ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Send(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/unix_dgram.cc:302:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   fd = info[0]->Int32Value();
                            ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/unix_dgram.cc:303:27: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   buf = info[1]->ToObject();
                           ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/node.h:63:0,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~
../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Connect(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/unix_dgram.cc:340:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   fd = info[0]->Int32Value();
                            ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/unix_dgram.cc:341:33: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Local<v8::Value>)’ is deprecated: Use Isolate version [-Wdeprecated-declarations]
   String::Utf8Value path(info[1]);
                                 ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2892:28: note: declared here
                   explicit Utf8Value(Local<v8::Value> obj));
                            ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/unix_dgram.cc: In function ‘Nan::NAN_METHOD_RETURN_TYPE {anonymous}::Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/unix_dgram.cc:361:28: warning: ‘int32_t v8::Value::Int32Value() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   fd = info[0]->Int32Value();
                            ^
In file included from /root/.cache/node-gyp/10.17.0/include/node/v8.h:26:0,
                 from /root/.cache/node-gyp/10.17.0/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/unix_dgram.cc:5:
/root/.cache/node-gyp/10.17.0/include/node/v8.h:2478:46: note: declared here
   V8_DEPRECATED("Use maybe version", int32_t Int32Value() const);
                                              ^
/root/.cache/node-gyp/10.17.0/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~

Könnte mir hier bitte jemand weiterhelfen?

Vielen Dank!

[apollon77]

Alles nur Warnungen, ignorieren. Wichtig ist was die letzten Zeilen der gesamten Ausgabe sind ... wenn da steht das alles ok ist dann ist alles ok

[mpa]

@apollon77 da kommt dann leider nichts mehr, da sich die VM aufhängt und Putty dadurch die Verbindung verliert.

[Ein ehemaliger Benutzer]

Ich versuche gerade, den ioBroker unter Lubuntu zum Laufen zu bringen.
Hierzu habe ich mich an die folgende Anleitung gehalten:
https://www.iobroker.net/#de/documentation/install/linux.md
Es sei wohl auch alles erfolgreich installiert worden.
Nur komme ich mit dem Browser nicht auf die Oberfläche.
http://<iplocalhost>:8081
Es kommt, Seite ist nicht erreichbar
ioborker habe ich mit iobroker stop/start als auch restart probiert neu zu starten

Ich habe dann mal probiert
iobroker start admin

Dann kommt:
module.js:549
throw err;
^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
at Function.Module._resolveFilename (module.js:547:15)

�

[AlCalzone]

@Alina sagte in Neue Installationsroutine (für Linux):

Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'

Das sieht mir nicht nach einer erfolgreichen Installation aus. Probiere es bitte nochmal und zeig uns dann die Ausgabe der Installation.

[Homoran]

@Alina
Wieso zwei Threads dazu?

Habe dir in dem anderen / älteren geantwortet

[debianatoe]

Kann man die neue Linux-Installationsroutine auch in buildroot-Systemen ausführen? buildroot ist ja ein besonders platzsparendes Linux. Das hätte dann insbesondere auf kleinen raspi-Systemen den Vorteil, daß man mehr RAM für den iobroker zur Verfügung hätte.

[apollon77]

@debianatoe @AlCalzone ?!

[AlCalzone]

@apollon77 @debianatoe
Probier es aus. Ich hab keine Ahnung und bisher nicht davon gehört.

[Homoran]

@apollon77 Ich denke eher nicht.
die CCU baut auf buildroot auf - wenn ich mich richtig erinnere hat sich Jens Maus da schon dran versucht

[debianatoe]

@Homoran Ja, die CCU baut auf buildroot auf. Aber buildroot läßt sich sehr variabel konfigurieren. Insofern wäre es denkbar, daß sich ein spezielles iobroker-buildroot, das mit dem CCU-buildroot nur wenig gemeinsam hat, bauen ließe. Wenn sich allerdings Jens Maus daran schon vergeblich (?) versucht hat, klingt das nach erheblichem Aufwand ...
Da wäre aus meiner Sicht ein iobroker-Installationsprofi gefragt, der genau weiß, welche Betriebssystem- und library-Bedingungen Voraussetzung sind.

[apollon77]

@debianatoe Am Ende stht alles im install.sh drin was auf Github steht ... alles ws fehlt wird nachinstalliert aktuell per apt oder yum

[AlCalzone]

@apollon77 sagte in Neue Installationsroutine (für Linux):

alles ws fehlt wird nachinstalliert

Das bezieht sich aber auf das, was wir von "normalen" Linux-Systemen kennen und wissen. Ggf muss bei buildroot noch mehr installiert werden.