PI4 Lässt JS Kontrolle nicht updaten
-
@freaktech sagte in PI4 Lässt JS Kontrolle nicht updaten:
bringt auch nix
Das heisst? Keinerlei Ausgabe?
Dann hast Du irgendein Netzwerk oder DNS oder Proxy Problem, weil du von der npm Webseite scheinbar irgendwie nichts valides bekommst.Geht ein
ping registry.npmjs.org?pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ ping registry.npmjs.org PING registry.npmjs.org (104.16.27.35) 56(84) bytes of data. 64 bytes from 104.16.27.35: icmp_seq=1 ttl=59 time=14.2 ms 64 bytes from 104.16.27.35: icmp_seq=2 ttl=59 time=11.5 ms 64 bytes from 104.16.27.35: icmp_seq=3 ttl=59 time=10.9 ms 64 bytes from 104.16.27.35: icmp_seq=4 ttl=59 time=22.7 ms 64 bytes from 104.16.27.35: icmp_seq=5 ttl=59 time=13.8 ms 64 bytes from 104.16.27.35: icmp_seq=6 ttl=59 time=22.2 ms 64 bytes from 104.16.27.35: icmp_seq=7 ttl=59 time=20.4 ms ^C --- registry.npmjs.org ping statistics --- 7 packets transmitted, 7 received, 0% packet loss, time 211ms rtt min/avg/max/mdev = 10.865/16.514/22.680/4.706 ms pi@iobrocker:/opt/iobroker $ -
wie kann ich den Hue adapter auf 2.0.1 bringen er zeigt mir nur 2.0 an ?!? evtl fängt er sich dann wieder
@freaktech sagte in PI4 Lässt JS Kontrolle nicht updaten:
wie kann ich den Hue adapter auf 2.0.1 bringen
Gar nicht. Dein npm funktioniert nicht richtig, d.h. du kannst weder einen Adapter noch JS-Controller aktualisieren.
wget -qO- https://registry.npmjs.org/
Apollon wollte die Ausgabe davon sehen.
upgrade selfkannst du erst mal sein lassen, bis du wieder dazu aufgefordert wirst. -
ok dann wart ich mal auf Vorschläge so bringts halt nix da der HUE nicht mehr läuft
host.iobrocker 2019-10-14 13:04:51.723 info Restart adapter system.adapter.hue.0 because enabled host.iobrocker 2019-10-14 13:04:51.723 error instance system.adapter.hue.0 terminated with code 0 (OK) host.iobrocker 2019-10-14 13:04:50.008 info instance system.adapter.hue.0 started with pid 30347 host.iobrocker 2019-10-14 13:04:48.987 info Restart adapter system.adapter.hue.0 because enabled host.iobrocker 2019-10-14 13:04:48.987 error instance system.adapter.hue.0 terminated with code 0 (OK) host.iobrocker 2019-10-14 13:04:47.359 info instance system.adapter.hue.0 started with pid 30339 host.iobrocker 2019-10-14 13:04:46.333 info Restart adapter system.adapter.hue.0 because enabled host.iobrocker 2019-10-14 13:04:46.333 error instance system.adapter.hue.0 terminated with code 0 (OK) host.iobrocker 2019-10-14 13:04:44.697 info instance system.adapter.hue.0 started with pid 30331 host.iobrocker 2019-10-14 13:04:43.680 info Restart adapter system.adapter.hue.0 because enabled host.iobrocker 2019-10-14 13:04:43.680 error instance system.adapter.hue.0 terminated with code 0 (OK) host.iobrocker 2019-10-14 13:04:42.010 info instance system.adapter.hue.0 started with pid 30324 -
ok dann wart ich mal auf Vorschläge so bringts halt nix da der HUE nicht mehr läuft
host.iobrocker 2019-10-14 13:04:51.723 info Restart adapter system.adapter.hue.0 because enabled host.iobrocker 2019-10-14 13:04:51.723 error instance system.adapter.hue.0 terminated with code 0 (OK) host.iobrocker 2019-10-14 13:04:50.008 info instance system.adapter.hue.0 started with pid 30347 host.iobrocker 2019-10-14 13:04:48.987 info Restart adapter system.adapter.hue.0 because enabled host.iobrocker 2019-10-14 13:04:48.987 error instance system.adapter.hue.0 terminated with code 0 (OK) host.iobrocker 2019-10-14 13:04:47.359 info instance system.adapter.hue.0 started with pid 30339 host.iobrocker 2019-10-14 13:04:46.333 info Restart adapter system.adapter.hue.0 because enabled host.iobrocker 2019-10-14 13:04:46.333 error instance system.adapter.hue.0 terminated with code 0 (OK) host.iobrocker 2019-10-14 13:04:44.697 info instance system.adapter.hue.0 started with pid 30331 host.iobrocker 2019-10-14 13:04:43.680 info Restart adapter system.adapter.hue.0 because enabled host.iobrocker 2019-10-14 13:04:43.680 error instance system.adapter.hue.0 terminated with code 0 (OK) host.iobrocker 2019-10-14 13:04:42.010 info instance system.adapter.hue.0 started with pid 30324@freaktech sagte in PI4 Lässt JS Kontrolle nicht updaten:
dann wart ich mal auf Vorschläge
Liefer doch erst mal die Informationen, die Helfer von dir wollen.
Was ist die Ausgabe von
wget -qO- https://registry.npmjs.org/?
Für hue:
- In der Oberfläche stoppen
- In die Konsole
cd /opt/iobroker/node_modules/iobroker.huenode main.js --force --logs- Die Ausgabe von 4. hier posten.
-
ok dann wart ich mal auf Vorschläge so bringts halt nix da der HUE nicht mehr läuft
host.iobrocker 2019-10-14 13:04:51.723 info Restart adapter system.adapter.hue.0 because enabled host.iobrocker 2019-10-14 13:04:51.723 error instance system.adapter.hue.0 terminated with code 0 (OK) host.iobrocker 2019-10-14 13:04:50.008 info instance system.adapter.hue.0 started with pid 30347 host.iobrocker 2019-10-14 13:04:48.987 info Restart adapter system.adapter.hue.0 because enabled host.iobrocker 2019-10-14 13:04:48.987 error instance system.adapter.hue.0 terminated with code 0 (OK) host.iobrocker 2019-10-14 13:04:47.359 info instance system.adapter.hue.0 started with pid 30339 host.iobrocker 2019-10-14 13:04:46.333 info Restart adapter system.adapter.hue.0 because enabled host.iobrocker 2019-10-14 13:04:46.333 error instance system.adapter.hue.0 terminated with code 0 (OK) host.iobrocker 2019-10-14 13:04:44.697 info instance system.adapter.hue.0 started with pid 30331 host.iobrocker 2019-10-14 13:04:43.680 info Restart adapter system.adapter.hue.0 because enabled host.iobrocker 2019-10-14 13:04:43.680 error instance system.adapter.hue.0 terminated with code 0 (OK) host.iobrocker 2019-10-14 13:04:42.010 info instance system.adapter.hue.0 started with pid 30324 -
@freaktech sagte in PI4 Lässt JS Kontrolle nicht updaten:
dann wart ich mal auf Vorschläge
Liefer doch erst mal die Informationen, die Helfer von dir wollen.
Was ist die Ausgabe von
wget -qO- https://registry.npmjs.org/?
Für hue:
- In der Oberfläche stoppen
- In die Konsole
cd /opt/iobroker/node_modules/iobroker.huenode main.js --force --logs- Die Ausgabe von 4. hier posten.
@AlCalzone said in PI4 Lässt JS Kontrolle nicht updaten:
wget -qO- https://registry.npmjs.org/
pi@iobrocker:/opt/iobroker $ wget -qO- https://registry.npmjs.org/ {"db_name":"registry","doc_count":1417354,"doc_del_count":340,"update_seq":5737861,"purge_seq":0,"compact_running":false,"disk_size":24759636103,"data_size":19681074249,"instance_start_time":"1570691704792381","disk_format_version":6,"committed_update_seq":5737861}pi@iobrocker:/opt/iobroker $hier passiert aber nichts
pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ node main.js --force --logs pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ node main.js --force --logs pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ -
@freaktech Und hast du das
inzwischen gemacht? Was war die Ausgabe davon? Danach kannst du das Upgrade probieren.pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ npm WARN using --force I sure hope you know what you are doing. npm WARN using --force I sure hope you know what you are doing. Usage: npm <command> where <command> is one of: access, adduser, audit, bin, bugs, c, cache, ci, cit, clean-install, clean-install-test, completion, config, create, ddp, dedupe, deprecate, dist-tag, docs, doctor, edit, explore, get, help, help-search, hook, i, init, install, install-ci-test, install-test, it, link, list, ln, login, logout, ls, org, outdated, owner, pack, ping, prefix, profile, prune, publish, rb, rebuild, repo, restart, root, run, run-script, s, se, search, set, shrinkwrap, star, stars, start, stop, t, team, test, token, tst, un, uninstall, unpublish, unstar, up, update, v, version, view, whoami npm <command> -h quick help on <command> npm -l display full usage info npm help <term> search for help on <term> npm help npm involved overview Specify configs in the ini-formatted file: /home/pi/.npmrc or on the command line via: npm <command> --key value Config info can be viewed via: npm help config npm@6.12.0 /usr/local/lib/node_modules/npm pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ -bash: pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue: Datei oder Verzeichnis nicht gefunden pi@iobrocker:/opt/iobroker $ -
@AlCalzone said in PI4 Lässt JS Kontrolle nicht updaten:
wget -qO- https://registry.npmjs.org/
pi@iobrocker:/opt/iobroker $ wget -qO- https://registry.npmjs.org/ {"db_name":"registry","doc_count":1417354,"doc_del_count":340,"update_seq":5737861,"purge_seq":0,"compact_running":false,"disk_size":24759636103,"data_size":19681074249,"instance_start_time":"1570691704792381","disk_format_version":6,"committed_update_seq":5737861}pi@iobrocker:/opt/iobroker $hier passiert aber nichts
pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ node main.js --force --logs pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ node main.js --force --logs pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $@freaktech Ok, die Ausgabe sieht an sich ok aus von dem npm Ding.
Manueller Adapterstart: ist ioBroker auch gestartet auf dem Host? Der muss laufen sonst geht das nicht.
bzw mach mal:
´node main.js silly --force --logs` -
pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ npm WARN using --force I sure hope you know what you are doing. npm WARN using --force I sure hope you know what you are doing. Usage: npm <command> where <command> is one of: access, adduser, audit, bin, bugs, c, cache, ci, cit, clean-install, clean-install-test, completion, config, create, ddp, dedupe, deprecate, dist-tag, docs, doctor, edit, explore, get, help, help-search, hook, i, init, install, install-ci-test, install-test, it, link, list, ln, login, logout, ls, org, outdated, owner, pack, ping, prefix, profile, prune, publish, rb, rebuild, repo, restart, root, run, run-script, s, se, search, set, shrinkwrap, star, stars, start, stop, t, team, test, token, tst, un, uninstall, unpublish, unstar, up, update, v, version, view, whoami npm <command> -h quick help on <command> npm -l display full usage info npm help <term> search for help on <term> npm help npm involved overview Specify configs in the ini-formatted file: /home/pi/.npmrc or on the command line via: npm <command> --key value Config info can be viewed via: npm help config npm@6.12.0 /usr/local/lib/node_modules/npm pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ -bash: pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue: Datei oder Verzeichnis nicht gefunden pi@iobrocker:/opt/iobroker $@freaktech Kommando sieht falsch aus
-
pi@iobrocker:/opt/iobroker $ node main.js silly --force --logs internal/modules/cjs/loader.js:583 throw err; ^ Error: Cannot find module '/opt/iobroker/main.js' at Function.Module._resolveFilename (internal/modules/cjs/loader.js:581:15) at Function.Module._load (internal/modules/cjs/loader.js:507:25) at Function.Module.runMain (internal/modules/cjs/loader.js:742:12) at startup (internal/bootstrap/node.js:283:19) at bootstrapNodeJSCore (internal/bootstrap/node.js:743:3) pi@iobrocker:/opt/iobroker $ -
pi@iobrocker:/opt/iobroker $ node main.js silly --force --logs internal/modules/cjs/loader.js:583 throw err; ^ Error: Cannot find module '/opt/iobroker/main.js' at Function.Module._resolveFilename (internal/modules/cjs/loader.js:581:15) at Function.Module._load (internal/modules/cjs/loader.js:507:25) at Function.Module.runMain (internal/modules/cjs/loader.js:742:12) at startup (internal/bootstrap/node.js:283:19) at bootstrapNodeJSCore (internal/bootstrap/node.js:743:3) pi@iobrocker:/opt/iobroker $@freaktech sagte in PI4 Lässt JS Kontrolle nicht updaten:
pi@iobrocker:/opt/iobroker $ node main.js silly --force --logs
falscher Ordner
Was ist mit den anderen Befehlen, nach denen ich inzwischen 2x gefragt habe? Achte bitte darauf, dass du die Befehle richtig eintippst oder kopierst.
Die letzten Logs sehen mir so aus als kopierst du wild irgendwelche Warnmeldungen und/oder Logausgaben als Befehle. -
@freaktech Ok, die Ausgabe sieht an sich ok aus von dem npm Ding.
Manueller Adapterstart: ist ioBroker auch gestartet auf dem Host? Der muss laufen sonst geht das nicht.
bzw mach mal:
´node main.js silly --force --logs`@apollon77 said in PI4 Lässt JS Kontrolle nicht updaten:
´node main.js silly --force --logs`
mach ich ja
pi@iobrocker:/opt/iobroker $ node main.js silly --force --logs internal/modules/cjs/loader.js:583 throw err; ^ Error: Cannot find module '/opt/iobroker/main.js' at Function.Module._resolveFilename (internal/modules/cjs/loader.js:581:15) at Function.Module._load (internal/modules/cjs/loader.js:507:25) at Function.Module.runMain (internal/modules/cjs/loader.js:742:12) at startup (internal/bootstrap/node.js:283:19) at bootstrapNodeJSCore (internal/bootstrap/node.js:743:3) pi@iobrocker:/opt/iobroker $was mach ich falsch?
-
@apollon77 said in PI4 Lässt JS Kontrolle nicht updaten:
´node main.js silly --force --logs`
mach ich ja
pi@iobrocker:/opt/iobroker $ node main.js silly --force --logs internal/modules/cjs/loader.js:583 throw err; ^ Error: Cannot find module '/opt/iobroker/main.js' at Function.Module._resolveFilename (internal/modules/cjs/loader.js:581:15) at Function.Module._load (internal/modules/cjs/loader.js:507:25) at Function.Module.runMain (internal/modules/cjs/loader.js:742:12) at startup (internal/bootstrap/node.js:283:19) at bootstrapNodeJSCore (internal/bootstrap/node.js:743:3) pi@iobrocker:/opt/iobroker $was mach ich falsch?
@freaktech Jetzt vergleich das mal mit dem was Du selbst weiter oben gepotet hast
https://forum.iobroker.net/post/310830
... ... ... ...
cd node_modules/iobroker.hue
vergessen? -
ja sorry ich bin wohl zu doof um es zu kapieren
diese vorgehensweise ist ja wohl auch falsch
pi@iobrocker:~ $ cd /opt/iobroker pi@iobrocker:/opt/iobroker $ cd node_modules/iobroker.hue pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ node main.js silly --force --logs pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ -
ja sorry ich bin wohl zu doof um es zu kapieren
diese vorgehensweise ist ja wohl auch falsch
pi@iobrocker:~ $ cd /opt/iobroker pi@iobrocker:/opt/iobroker $ cd node_modules/iobroker.hue pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ node main.js silly --force --logs pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ -
ja sorry ich bin wohl zu doof um es zu kapieren
diese vorgehensweise ist ja wohl auch falsch
pi@iobrocker:~ $ cd /opt/iobroker pi@iobrocker:/opt/iobroker $ cd node_modules/iobroker.hue pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ node main.js silly --force --logs pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $@freaktech Ok, Frage: kommt es direkt zurück der Befehl oder "Hängt er"?
-
das bringt leider nichts
pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ npm cache verify Cache verified and compressed (~/.npm/_cacache): Content verified: 0 (0 bytes) Index entries: 0 Finished in 0.067s pi@iobrocker:/opt/iobroker $ npm cache clean --force npm WARN using --force I sure hope you know what you are doing. pi@iobrocker:/opt/iobroker $pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ npm cche verify Usage: npm <command> where <command> is one of: access, adduser, audit, bin, bugs, c, cache, ci, cit, clean-install, clean-install-test, completion, config, create, ddp, dedupe, deprecate, dist-tag, docs, doctor, edit, explore, get, help, help-search, hook, i, init, install, install-ci-test, install-test, it, link, list, ln, login, logout, ls, org, outdated, owner, pack, ping, prefix, profile, prune, publish, rb, rebuild, repo, restart, root, run, run-script, s, se, search, set, shrinkwrap, star, stars, start, stop, t, team, test, token, tst, un, uninstall, unpublish, unstar, up, update, v, version, view, whoami npm <command> -h quick help on <command> npm -l display full usage info npm help <term> search for help on <term> npm help npm involved overview Specify configs in the ini-formatted file: /home/pi/.npmrc or on the command line via: npm <command> --key value Config info can be viewed via: npm help config npm@6.12.0 /usr/local/lib/node_modules/npm Did you mean this? cache pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ npm cache verify Cache verified and compressed (~/.npm/_cacache): Content verified: 0 (0 bytes) Index entries: 0 Finished in 0.067s pi@iobrocker:/opt/iobroker $ npm cache clean --force npm WARN using --force I sure hope you know what you are doing. pi@iobrocker:/opt/iobroker $ ^C pi@iobrocker:/opt/iobroker $ sudo iobroker stop pi@iobrocker:/opt/iobroker $ sudo iobroker update Used repository: latest hash not changed, use actual sources update done Cannot read or parse /opt/iobroker/node_modules/iobroker.js-controller/lib/../node_modules/iobroker.hue/io-package.json: SyntaxError: Unexpected end of JSON input Cannot read or parse /opt/iobroker/node_modules/iobroker.js-controller/lib/../node_modules/iobroker.hue/io-package.json: SyntaxError: Unexpected end of JSON input Adapter "admin" : 3.6.9 , installed 3.6.9 Adapter "admin-2" : 2.0.10 Adapter "alexa2" : 2.6.4 , installed 2.6.4 Adapter "alpha2" : 1.0.0 Adapter "amazon-dash" : 0.3.1 Adapter "artnet" : 1.0.0 Adapter "asterisk" : 1.0.6 Adapter "asuswrt" : 1.0.1 Adapter "b-control-em" : 0.2.1 Adapter "backitup" : 1.2.0 , installed 1.2.0 Adapter "beckhoff" : 1.0.6 Adapter "benq" : 0.2.0 Adapter "ble" : 0.10.1 Adapter "bmw" : 1.4.0 Adapter "boblight" : 0.0.1 Adapter "bosesoundtouch": 0.2.4 Adapter "botvac" : 1.0.0 Adapter "bring" : 1.6.5 Adapter "broadlink2" : 2.0.0 Adapter "chromecast" : 2.2.3 Adapter "cloud" : 2.6.2 , installed 2.6.2 Adapter "comfoair" : 0.3.2 Adapter "contactid" : 1.0.0 Adapter "corrently" : 0.0.2 Adapter "countdown" : 1.0.4 Adapter "cul" : 1.0.0 Adapter "daikin" : 1.0.5 Adapter "daswetter" : 2.8.1 , installed 2.8.1 Adapter "deconz" : 1.1.2 Adapter "denon" : 1.6.1 Adapter "devices" : 0.1.7 Adapter "discovergy" : 0.4.7 Adapter "discovery" : 2.0.0 , installed 2.0.0 Adapter "doorbird" : 0.1.5 Adapter "ds18b20" : 1.0.2 Adapter "dwd" : 2.4.3 Adapter "ebus" : 0.8.0 Adapter "egigeozone" : 0.1.2 Adapter "ekey" : 1.1.0 Adapter "email" : 1.0.5 Adapter "emby" : 1.0.0 Adapter "energymanager" : 1.2.1 Adapter "enet" : 1.0.1 Adapter "epson_stylus_px830": 0.2.1 Adapter "fakeroku" : 0.2.1 Adapter "feiertage" : 1.0.11 Adapter "fhem" : 1.3.0 Adapter "find-my-iphone": 0.2.17 Adapter "firetv" : 0.0.33 Adapter "flot" : 1.9.2 Adapter "foobar2000" : 1.0.0 Adapter "fritzbox" : 0.2.1 Adapter "fritzdect" : 0.2.4 Adapter "fronius" : 1.0.5 Adapter "fullcalendar" : 0.2.4 Adapter "fullybrowser" : 1.0.1 Adapter "g-homa" : 0.5.1 Adapter "geofency" : 0.3.2 Adapter "gruenbeck" : 0.0.14 Adapter "habpanel" : 0.3.4 Adapter "haier" : 1.0.2 Adapter "ham" : 1.1.2 Adapter "ham-wemo" : 1.0.1 Adapter "harmony" : 1.2.2 Adapter "hass-mqtt" : 0.0.7 Adapter "heatingcontrol": 0.2.3 Adapter "heytech" : 0.1.4 Adapter "hid" : 0.1.17 Adapter "hilink" : 0.2.7 Adapter "history" : 1.8.7 Adapter "hm-rega" : 2.4.12 Adapter "hm-rpc" : 1.10.0 Adapter "hmip" : 0.0.11 Adapter "hombot" : 0.1.3 Adapter "homeconnect" : 0.0.24 Adapter "homee" : modified Adapter "homepilot" : 1.0.3 Adapter "hp-ilo" : 1.0.1 Adapter "hs100" : 1.0.10 Adapter "hue" : 2.0.0 Adapter "hue-extended" : 0.9.0 Adapter "hyperion" : 0.0.9 Adapter "i2c" : 0.0.6 Adapter "ical" : 1.7.0 , installed 1.7.0 Adapter "icons-addictive-flavour-png": 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0 Adapter "icons-icons8" : 0.0.1 Adapter "icons-material-png": 0.1.0 Adapter "icons-material-svg": 0.1.0 Adapter "icons-mfd-png" : 1.0.2 Adapter "icons-mfd-svg" : 1.0.2 Adapter "icons-open-icon-library-png": 0.1.3 Adapter "icons-ultimate-png": 1.0.1 Adapter "influxdb" : 1.6.3 Adapter "info" : 1.5.5 , installed 1.5.5 Adapter "innogy-smarthome": 0.3.3 Adapter "intesishome" : 0.1.2 Adapter "iogo" : 0.4.13 Adapter "iot" : 1.1.8 Adapter "iqontrol" : 0.2.12 Adapter "javascript" : 4.3.0 , installed 4.3.0 Adapter "jeelink" : 0.1.3 Controller "js-controller" : 2.0.29 , installed 1.5.14 [Updateable] Adapter "js2fs" : 0.1.5 , installed 0.1.5 Adapter "kecontact" : 0.1.0 Adapter "klf200" : 0.9.5 Adapter "km200" : 2.0.3 Adapter "knmi-weather" : 0.1.1 Adapter "knx" : 1.0.35 Adapter "kodi" : 1.0.0 Adapter "kress" : 2.5.5 Adapter "landroid" : 1.0.3 Adapter "lcn" : 0.4.2 Adapter "letrika_comgw" : 0.0.4 Adapter "lgtv" : 1.0.8 Adapter "lgtv-rs" : 0.0.4 Adapter "lgtv11" : 1.0.5 Adapter "lifx" : 0.1.0 Adapter "lightify" : 0.2.16 Adapter "link" : 0.4.4 Adapter "linkeddevices" : 1.0.1 Adapter "lovelace" : 0.1.5 Adapter "loxone" : 1.0.0 Adapter "luftdaten" : 0.0.7 Adapter "lupusec" : 1.2.0 Adapter "luxtronik1" : 0.0.7 Adapter "material" : 0.10.6 Adapter "maxcube" : 0.1.2 , installed 0.1.2 Adapter "maxcul" : 1.1.2 Adapter "mbus" : 1.1.1 Adapter "mclighting" : 0.0.12 Adapter "megad" : 1.2.1 Adapter "megadd" : 0.2.0 Adapter "megaesp" : 0.1.0 Adapter "mercedesme" : 0.0.16 Adapter "meross" : 1.0.0 Adapter "meteoalarm" : 1.0.5 Adapter "miele" : 0.1.5 Adapter "mihome" : 1.2.8 Adapter "mihome-airpurifier": 0.0.6 Adapter "mihome-lamp" : 1.1.0 Adapter "mihome-plug" : 0.2.0 Adapter "mihome-vacuum" : 1.1.5 Adapter "miio" : 0.0.13 Adapter "mikrotik" : 1.0.4 Adapter "milight" : 0.3.6 Adapter "milight-smart-light": 0.2.7 Adapter "mobile" : 0.5.0 Adapter "modbus" : 3.0.0 Adapter "moma" : 1.2.2 Adapter "mpd" : 1.0.2 Adapter "mqtt" : 2.1.1 , installed 2.1.1 Adapter "mqtt-client" : 1.1.1 Adapter "multicast" : 0.1.1 Adapter "musiccast" : 0.1.2 Adapter "mysensors" : 2.0.0 Adapter "nanoleaf-lightpanels": 0.8.2 Adapter "nello" : 2.0.8 Adapter "netatmo" : 1.3.1 Adapter "nibeuplink" : 0.2.2 Adapter "nina" : 0.0.13 Adapter "node-red" : 1.12.0 Adapter "nuki" : 1.0.7 Adapter "nuki2" : 1.0.4 Adapter "nut" : 1.1.3 Adapter "oilfox" : 0.0.7 Adapter "onkyo" : 2.0.3 Adapter "onvif" : modified Adapter "openhab" : 1.1.0 Adapter "opentherm" : 0.1.9 Adapter "openweathermap": modified Adapter "opi" : 0.1.1 , installed 0.1.1 Adapter "oppoplayer" : 0.2.1 Adapter "owfs" : 0.6.1 Adapter "owntracks" : 0.6.2 Adapter "panasonic-viera": 1.0.2 Adapter "parser" : 1.0.7 Adapter "paw" : 0.3.2 Adapter "phantomjs" : 1.0.1 Adapter "pi-hole" : 1.2.1 Adapter "piface" : 1.0.0 Adapter "pimatic" : 0.1.5 Adapter "ping" : 1.3.2 Adapter "places" : 0.7.0 Adapter "plex" : 0.6.0 Adapter "plexconnect" : 0.0.7 Adapter "pollenflug" : 1.0.3 Adapter "primelab" : 1.0.2 Adapter "proxmox" : 0.5.1 Adapter "proxy" : 1.1.1 Adapter "pushbullet" : 0.0.11 Adapter "pushover" : 1.1.1 , installed 1.1.1 Adapter "pushsafer" : 0.1.8 Adapter "radar2" : 1.0.9 Adapter "radiohead" : 1.0.2 Adapter "rflink" : 2.0.0 Adapter "rickshaw" : 1.0.0 Adapter "ring" : 1.0.5 Adapter "roadtraffic" : 0.0.2 Adapter "roomba" : 1.0.7 Adapter "rpi2" : 1.1.1 Adapter "s7" : 1.1.4 Adapter "samsung" : 0.2.9 Adapter "sayit" : 1.8.2 Adapter "sbfspot" : 2.3.2 Adapter "scenes" : 1.1.0 Adapter "schoolfree" : 0.2.2 Adapter "shelly" : 3.1.1 , installed 3.1.1 Adapter "shuttercontrol": 0.3.2 Adapter "sia" : 1.0.3 Adapter "siegenia" : 1.0.0 Adapter "simple-api" : 2.3.1 , installed 2.3.1 Adapter "sma-em" : 0.5.3 Adapter "smappee" : 0.2.2 Adapter "smartmeter" : 1.2.2 Adapter "snips" : 1.5.0 Adapter "snmp" : 0.5.0 Adapter "socketio" : 2.1.2 , installed 2.1.2 Adapter "solarlog" : 0.1.5 Adapter "solarwetter" : 1.0.0 Adapter "sonnen" : 1.3.0 Adapter "sonoff" : 2.2.2 Adapter "sonos" : 2.0.0 Adapter "sonus" : 0.1.1 Adapter "sony-bravia" : 1.0.1 Adapter "sourceanalytix": 0.2.5 Adapter "spotify-premium": 1.0.0 Adapter "sql" : 1.9.5 Adapter "squeezebox" : 1.0.0 Adapter "squeezeboxrpc" : 0.8.18 Adapter "starline" : 1.0.0 Adapter "statistics" : 0.2.2 Adapter "stiebel-isg" : 1.4.7 Adapter "synology" : 0.0.4 Adapter "systeminfo" : 0.2.2 Adapter "tankerkoenig" : 2.0.6 Adapter "telegram" : 1.4.3 , installed 1.4.3 Adapter "terminal" : 0.1.2 , installed 0.1.2 Adapter "text2command" : 1.3.0 Adapter "tileboard" : modified Adapter "tinker" : 0.1.4 Adapter "tr-064" : 0.4.18 Adapter "tradfri" : 2.4.4 Adapter "tunnelbroker-endpoint-updater": modified Adapter "tuya" : 3.0.0 Adapter "tvspielfilm" : 1.0.4 Adapter "unifi" : 0.3.1 Adapter "upnp" : 1.0.14 Adapter "valloxmv" : 1.0.0 Adapter "vcard" : 0.0.9 Adapter "viessmann" : 1.2.2 Adapter "viessmannapi" : 1.3.2 Adapter "virtualpowermeter": 1.0.1 Adapter "vis" : 1.2.1 , installed 1.2.1 Adapter "vis-bars" : 0.1.4 Adapter "vis-canvas-gauges": 0.1.5 Adapter "vis-colorpicker": 1.1.1 , installed 1.1.1 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 0.1.0 Adapter "vis-history" : 1.0.0 Adapter "vis-hqwidgets" : 1.1.2 , installed 1.1.2 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.1 Adapter "vis-keyboard" : 0.0.2 Adapter "vis-lcars" : 1.0.4 Adapter "vis-map" : 1.0.2 Adapter "vis-material" : 0.1.3 Adapter "vis-metro" : 1.1.2 Adapter "vis-players" : 0.1.5 Adapter "vis-plumb" : 1.0.2 Adapter "vis-rgraph" : 0.0.2 Adapter "vis-timeandweather": 1.1.7 , installed 1.1.7 Adapter "vis-weather" : 2.3.0 Adapter "vr200" : 1.0.0 Adapter "weatherunderground": 3.1.3 Adapter "web" : 2.4.5 , installed 2.4.5 Adapter "wetty" : 0.1.1 Adapter "wiffi-wz" : 2.1.4 Adapter "wifilight" : 0.2.0 Adapter "wlanthermo-nano": 0.1.1 Adapter "wm-bus" : 0.3.1 Adapter "wolf" : 0.9.2 Adapter "worx" : 0.4.0 Adapter "xbox" : 0.5.8 Adapter "xs1" : 1.0.2 Adapter "yahka" : 0.9.2 Adapter "yamaha" : 0.3.19 Adapter "yeelight-2" : 1.0.1 Adapter "yr" : 2.0.3 Adapter "zigbee" : 0.11.3 Adapter "zont" : 0.5.3 Adapter "zwave" : 1.6.3 Adapter "zwave2" : 0.1.3 pi@iobrocker:/opt/iobroker $ sudo iobroker upgrade self Update js-controller from @1.5.14 to @2.0.29 NPM version: 6.12.0 npm install iobroker.js-controller@2.0.29 --unsafe-perm --production --save --prefix "/opt/iobroker" (System call) npm WARN registry Unexpected warning for https://registry.npmjs.org/: Miscellaneous Warning ENODATA: Cache input stream was empty npm WARN registry Using stale data from https://registry.npmjs.org/ due to a request error during revalidation. npm ERR! code EINTEGRITY npm ERR! errno EINTEGRITY npm ERR! Invalid response body while trying to fetch https://registry.npmjs.org/y18n: Integrity verification failed for sha512-nT7014PDaWpa3jrXmq1tS07aiudLEjWmD1iEbLzOxO/4+6DMqVptZ1Scz5PnnN/haHCZTAmWOMNvHKfY32wv9A== (/home/iobroker/.npm/_cacache/content-v2/sha512/9d/3e/f4d783c3696a5ade3ad79aad6d4b4eda8ae74b1235a60f58846cbccec4eff8fba0cca95a6d67549ccf93e79cdfe16870994c099638c36f1ca7d8df6c2ff4) npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2019-10-14T12_19_41_959Z-debug.log Host "iobrocker" (linux) updated Execute: chmod -R 777 /opt/iobroker Chmod finished. Restart controller Starting node restart.js pi@iobrocker:/opt/iobroker $ -
@freaktech Ok, Frage: kommt es direkt zurück der Befehl oder "Hängt er"?
mehr als was ich gepostet habe passiert nicht
-
das bringt leider nichts
pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ npm cache verify Cache verified and compressed (~/.npm/_cacache): Content verified: 0 (0 bytes) Index entries: 0 Finished in 0.067s pi@iobrocker:/opt/iobroker $ npm cache clean --force npm WARN using --force I sure hope you know what you are doing. pi@iobrocker:/opt/iobroker $pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ npm cche verify Usage: npm <command> where <command> is one of: access, adduser, audit, bin, bugs, c, cache, ci, cit, clean-install, clean-install-test, completion, config, create, ddp, dedupe, deprecate, dist-tag, docs, doctor, edit, explore, get, help, help-search, hook, i, init, install, install-ci-test, install-test, it, link, list, ln, login, logout, ls, org, outdated, owner, pack, ping, prefix, profile, prune, publish, rb, rebuild, repo, restart, root, run, run-script, s, se, search, set, shrinkwrap, star, stars, start, stop, t, team, test, token, tst, un, uninstall, unpublish, unstar, up, update, v, version, view, whoami npm <command> -h quick help on <command> npm -l display full usage info npm help <term> search for help on <term> npm help npm involved overview Specify configs in the ini-formatted file: /home/pi/.npmrc or on the command line via: npm <command> --key value Config info can be viewed via: npm help config npm@6.12.0 /usr/local/lib/node_modules/npm Did you mean this? cache pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker $ npm cache verify Cache verified and compressed (~/.npm/_cacache): Content verified: 0 (0 bytes) Index entries: 0 Finished in 0.067s pi@iobrocker:/opt/iobroker $ npm cache clean --force npm WARN using --force I sure hope you know what you are doing. pi@iobrocker:/opt/iobroker $ ^C pi@iobrocker:/opt/iobroker $ sudo iobroker stop pi@iobrocker:/opt/iobroker $ sudo iobroker update Used repository: latest hash not changed, use actual sources update done Cannot read or parse /opt/iobroker/node_modules/iobroker.js-controller/lib/../node_modules/iobroker.hue/io-package.json: SyntaxError: Unexpected end of JSON input Cannot read or parse /opt/iobroker/node_modules/iobroker.js-controller/lib/../node_modules/iobroker.hue/io-package.json: SyntaxError: Unexpected end of JSON input Adapter "admin" : 3.6.9 , installed 3.6.9 Adapter "admin-2" : 2.0.10 Adapter "alexa2" : 2.6.4 , installed 2.6.4 Adapter "alpha2" : 1.0.0 Adapter "amazon-dash" : 0.3.1 Adapter "artnet" : 1.0.0 Adapter "asterisk" : 1.0.6 Adapter "asuswrt" : 1.0.1 Adapter "b-control-em" : 0.2.1 Adapter "backitup" : 1.2.0 , installed 1.2.0 Adapter "beckhoff" : 1.0.6 Adapter "benq" : 0.2.0 Adapter "ble" : 0.10.1 Adapter "bmw" : 1.4.0 Adapter "boblight" : 0.0.1 Adapter "bosesoundtouch": 0.2.4 Adapter "botvac" : 1.0.0 Adapter "bring" : 1.6.5 Adapter "broadlink2" : 2.0.0 Adapter "chromecast" : 2.2.3 Adapter "cloud" : 2.6.2 , installed 2.6.2 Adapter "comfoair" : 0.3.2 Adapter "contactid" : 1.0.0 Adapter "corrently" : 0.0.2 Adapter "countdown" : 1.0.4 Adapter "cul" : 1.0.0 Adapter "daikin" : 1.0.5 Adapter "daswetter" : 2.8.1 , installed 2.8.1 Adapter "deconz" : 1.1.2 Adapter "denon" : 1.6.1 Adapter "devices" : 0.1.7 Adapter "discovergy" : 0.4.7 Adapter "discovery" : 2.0.0 , installed 2.0.0 Adapter "doorbird" : 0.1.5 Adapter "ds18b20" : 1.0.2 Adapter "dwd" : 2.4.3 Adapter "ebus" : 0.8.0 Adapter "egigeozone" : 0.1.2 Adapter "ekey" : 1.1.0 Adapter "email" : 1.0.5 Adapter "emby" : 1.0.0 Adapter "energymanager" : 1.2.1 Adapter "enet" : 1.0.1 Adapter "epson_stylus_px830": 0.2.1 Adapter "fakeroku" : 0.2.1 Adapter "feiertage" : 1.0.11 Adapter "fhem" : 1.3.0 Adapter "find-my-iphone": 0.2.17 Adapter "firetv" : 0.0.33 Adapter "flot" : 1.9.2 Adapter "foobar2000" : 1.0.0 Adapter "fritzbox" : 0.2.1 Adapter "fritzdect" : 0.2.4 Adapter "fronius" : 1.0.5 Adapter "fullcalendar" : 0.2.4 Adapter "fullybrowser" : 1.0.1 Adapter "g-homa" : 0.5.1 Adapter "geofency" : 0.3.2 Adapter "gruenbeck" : 0.0.14 Adapter "habpanel" : 0.3.4 Adapter "haier" : 1.0.2 Adapter "ham" : 1.1.2 Adapter "ham-wemo" : 1.0.1 Adapter "harmony" : 1.2.2 Adapter "hass-mqtt" : 0.0.7 Adapter "heatingcontrol": 0.2.3 Adapter "heytech" : 0.1.4 Adapter "hid" : 0.1.17 Adapter "hilink" : 0.2.7 Adapter "history" : 1.8.7 Adapter "hm-rega" : 2.4.12 Adapter "hm-rpc" : 1.10.0 Adapter "hmip" : 0.0.11 Adapter "hombot" : 0.1.3 Adapter "homeconnect" : 0.0.24 Adapter "homee" : modified Adapter "homepilot" : 1.0.3 Adapter "hp-ilo" : 1.0.1 Adapter "hs100" : 1.0.10 Adapter "hue" : 2.0.0 Adapter "hue-extended" : 0.9.0 Adapter "hyperion" : 0.0.9 Adapter "i2c" : 0.0.6 Adapter "ical" : 1.7.0 , installed 1.7.0 Adapter "icons-addictive-flavour-png": 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0 Adapter "icons-icons8" : 0.0.1 Adapter "icons-material-png": 0.1.0 Adapter "icons-material-svg": 0.1.0 Adapter "icons-mfd-png" : 1.0.2 Adapter "icons-mfd-svg" : 1.0.2 Adapter "icons-open-icon-library-png": 0.1.3 Adapter "icons-ultimate-png": 1.0.1 Adapter "influxdb" : 1.6.3 Adapter "info" : 1.5.5 , installed 1.5.5 Adapter "innogy-smarthome": 0.3.3 Adapter "intesishome" : 0.1.2 Adapter "iogo" : 0.4.13 Adapter "iot" : 1.1.8 Adapter "iqontrol" : 0.2.12 Adapter "javascript" : 4.3.0 , installed 4.3.0 Adapter "jeelink" : 0.1.3 Controller "js-controller" : 2.0.29 , installed 1.5.14 [Updateable] Adapter "js2fs" : 0.1.5 , installed 0.1.5 Adapter "kecontact" : 0.1.0 Adapter "klf200" : 0.9.5 Adapter "km200" : 2.0.3 Adapter "knmi-weather" : 0.1.1 Adapter "knx" : 1.0.35 Adapter "kodi" : 1.0.0 Adapter "kress" : 2.5.5 Adapter "landroid" : 1.0.3 Adapter "lcn" : 0.4.2 Adapter "letrika_comgw" : 0.0.4 Adapter "lgtv" : 1.0.8 Adapter "lgtv-rs" : 0.0.4 Adapter "lgtv11" : 1.0.5 Adapter "lifx" : 0.1.0 Adapter "lightify" : 0.2.16 Adapter "link" : 0.4.4 Adapter "linkeddevices" : 1.0.1 Adapter "lovelace" : 0.1.5 Adapter "loxone" : 1.0.0 Adapter "luftdaten" : 0.0.7 Adapter "lupusec" : 1.2.0 Adapter "luxtronik1" : 0.0.7 Adapter "material" : 0.10.6 Adapter "maxcube" : 0.1.2 , installed 0.1.2 Adapter "maxcul" : 1.1.2 Adapter "mbus" : 1.1.1 Adapter "mclighting" : 0.0.12 Adapter "megad" : 1.2.1 Adapter "megadd" : 0.2.0 Adapter "megaesp" : 0.1.0 Adapter "mercedesme" : 0.0.16 Adapter "meross" : 1.0.0 Adapter "meteoalarm" : 1.0.5 Adapter "miele" : 0.1.5 Adapter "mihome" : 1.2.8 Adapter "mihome-airpurifier": 0.0.6 Adapter "mihome-lamp" : 1.1.0 Adapter "mihome-plug" : 0.2.0 Adapter "mihome-vacuum" : 1.1.5 Adapter "miio" : 0.0.13 Adapter "mikrotik" : 1.0.4 Adapter "milight" : 0.3.6 Adapter "milight-smart-light": 0.2.7 Adapter "mobile" : 0.5.0 Adapter "modbus" : 3.0.0 Adapter "moma" : 1.2.2 Adapter "mpd" : 1.0.2 Adapter "mqtt" : 2.1.1 , installed 2.1.1 Adapter "mqtt-client" : 1.1.1 Adapter "multicast" : 0.1.1 Adapter "musiccast" : 0.1.2 Adapter "mysensors" : 2.0.0 Adapter "nanoleaf-lightpanels": 0.8.2 Adapter "nello" : 2.0.8 Adapter "netatmo" : 1.3.1 Adapter "nibeuplink" : 0.2.2 Adapter "nina" : 0.0.13 Adapter "node-red" : 1.12.0 Adapter "nuki" : 1.0.7 Adapter "nuki2" : 1.0.4 Adapter "nut" : 1.1.3 Adapter "oilfox" : 0.0.7 Adapter "onkyo" : 2.0.3 Adapter "onvif" : modified Adapter "openhab" : 1.1.0 Adapter "opentherm" : 0.1.9 Adapter "openweathermap": modified Adapter "opi" : 0.1.1 , installed 0.1.1 Adapter "oppoplayer" : 0.2.1 Adapter "owfs" : 0.6.1 Adapter "owntracks" : 0.6.2 Adapter "panasonic-viera": 1.0.2 Adapter "parser" : 1.0.7 Adapter "paw" : 0.3.2 Adapter "phantomjs" : 1.0.1 Adapter "pi-hole" : 1.2.1 Adapter "piface" : 1.0.0 Adapter "pimatic" : 0.1.5 Adapter "ping" : 1.3.2 Adapter "places" : 0.7.0 Adapter "plex" : 0.6.0 Adapter "plexconnect" : 0.0.7 Adapter "pollenflug" : 1.0.3 Adapter "primelab" : 1.0.2 Adapter "proxmox" : 0.5.1 Adapter "proxy" : 1.1.1 Adapter "pushbullet" : 0.0.11 Adapter "pushover" : 1.1.1 , installed 1.1.1 Adapter "pushsafer" : 0.1.8 Adapter "radar2" : 1.0.9 Adapter "radiohead" : 1.0.2 Adapter "rflink" : 2.0.0 Adapter "rickshaw" : 1.0.0 Adapter "ring" : 1.0.5 Adapter "roadtraffic" : 0.0.2 Adapter "roomba" : 1.0.7 Adapter "rpi2" : 1.1.1 Adapter "s7" : 1.1.4 Adapter "samsung" : 0.2.9 Adapter "sayit" : 1.8.2 Adapter "sbfspot" : 2.3.2 Adapter "scenes" : 1.1.0 Adapter "schoolfree" : 0.2.2 Adapter "shelly" : 3.1.1 , installed 3.1.1 Adapter "shuttercontrol": 0.3.2 Adapter "sia" : 1.0.3 Adapter "siegenia" : 1.0.0 Adapter "simple-api" : 2.3.1 , installed 2.3.1 Adapter "sma-em" : 0.5.3 Adapter "smappee" : 0.2.2 Adapter "smartmeter" : 1.2.2 Adapter "snips" : 1.5.0 Adapter "snmp" : 0.5.0 Adapter "socketio" : 2.1.2 , installed 2.1.2 Adapter "solarlog" : 0.1.5 Adapter "solarwetter" : 1.0.0 Adapter "sonnen" : 1.3.0 Adapter "sonoff" : 2.2.2 Adapter "sonos" : 2.0.0 Adapter "sonus" : 0.1.1 Adapter "sony-bravia" : 1.0.1 Adapter "sourceanalytix": 0.2.5 Adapter "spotify-premium": 1.0.0 Adapter "sql" : 1.9.5 Adapter "squeezebox" : 1.0.0 Adapter "squeezeboxrpc" : 0.8.18 Adapter "starline" : 1.0.0 Adapter "statistics" : 0.2.2 Adapter "stiebel-isg" : 1.4.7 Adapter "synology" : 0.0.4 Adapter "systeminfo" : 0.2.2 Adapter "tankerkoenig" : 2.0.6 Adapter "telegram" : 1.4.3 , installed 1.4.3 Adapter "terminal" : 0.1.2 , installed 0.1.2 Adapter "text2command" : 1.3.0 Adapter "tileboard" : modified Adapter "tinker" : 0.1.4 Adapter "tr-064" : 0.4.18 Adapter "tradfri" : 2.4.4 Adapter "tunnelbroker-endpoint-updater": modified Adapter "tuya" : 3.0.0 Adapter "tvspielfilm" : 1.0.4 Adapter "unifi" : 0.3.1 Adapter "upnp" : 1.0.14 Adapter "valloxmv" : 1.0.0 Adapter "vcard" : 0.0.9 Adapter "viessmann" : 1.2.2 Adapter "viessmannapi" : 1.3.2 Adapter "virtualpowermeter": 1.0.1 Adapter "vis" : 1.2.1 , installed 1.2.1 Adapter "vis-bars" : 0.1.4 Adapter "vis-canvas-gauges": 0.1.5 Adapter "vis-colorpicker": 1.1.1 , installed 1.1.1 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 0.1.0 Adapter "vis-history" : 1.0.0 Adapter "vis-hqwidgets" : 1.1.2 , installed 1.1.2 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.1 Adapter "vis-keyboard" : 0.0.2 Adapter "vis-lcars" : 1.0.4 Adapter "vis-map" : 1.0.2 Adapter "vis-material" : 0.1.3 Adapter "vis-metro" : 1.1.2 Adapter "vis-players" : 0.1.5 Adapter "vis-plumb" : 1.0.2 Adapter "vis-rgraph" : 0.0.2 Adapter "vis-timeandweather": 1.1.7 , installed 1.1.7 Adapter "vis-weather" : 2.3.0 Adapter "vr200" : 1.0.0 Adapter "weatherunderground": 3.1.3 Adapter "web" : 2.4.5 , installed 2.4.5 Adapter "wetty" : 0.1.1 Adapter "wiffi-wz" : 2.1.4 Adapter "wifilight" : 0.2.0 Adapter "wlanthermo-nano": 0.1.1 Adapter "wm-bus" : 0.3.1 Adapter "wolf" : 0.9.2 Adapter "worx" : 0.4.0 Adapter "xbox" : 0.5.8 Adapter "xs1" : 1.0.2 Adapter "yahka" : 0.9.2 Adapter "yamaha" : 0.3.19 Adapter "yeelight-2" : 1.0.1 Adapter "yr" : 2.0.3 Adapter "zigbee" : 0.11.3 Adapter "zont" : 0.5.3 Adapter "zwave" : 1.6.3 Adapter "zwave2" : 0.1.3 pi@iobrocker:/opt/iobroker $ sudo iobroker upgrade self Update js-controller from @1.5.14 to @2.0.29 NPM version: 6.12.0 npm install iobroker.js-controller@2.0.29 --unsafe-perm --production --save --prefix "/opt/iobroker" (System call) npm WARN registry Unexpected warning for https://registry.npmjs.org/: Miscellaneous Warning ENODATA: Cache input stream was empty npm WARN registry Using stale data from https://registry.npmjs.org/ due to a request error during revalidation. npm ERR! code EINTEGRITY npm ERR! errno EINTEGRITY npm ERR! Invalid response body while trying to fetch https://registry.npmjs.org/y18n: Integrity verification failed for sha512-nT7014PDaWpa3jrXmq1tS07aiudLEjWmD1iEbLzOxO/4+6DMqVptZ1Scz5PnnN/haHCZTAmWOMNvHKfY32wv9A== (/home/iobroker/.npm/_cacache/content-v2/sha512/9d/3e/f4d783c3696a5ade3ad79aad6d4b4eda8ae74b1235a60f58846cbccec4eff8fba0cca95a6d67549ccf93e79cdfe16870994c099638c36f1ca7d8df6c2ff4) npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2019-10-14T12_19_41_959Z-debug.log Host "iobrocker" (linux) updated Execute: chmod -R 777 /opt/iobroker Chmod finished. Restart controller Starting node restart.js pi@iobrocker:/opt/iobroker $Cannot read or parse /opt/iobroker/node_modules/iobroker.js-controller/lib/../node_modules/iobroker.hue/io-package.json: SyntaxError: Unexpected end of JSON input
Now we come closer. Please reinstall iobroker.hue
cd /opt/iobroker
npm install iobroker.hue
iobroker upload hue
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden512
Online32.9k
Benutzer83.0k
Themen1.3m
Beiträge