PI4 Lässt JS Kontrolle nicht updaten

apollon77

@freaktech sagte in PI4 Lässt JS Kontrolle nicht updaten:

bringt auch nix

Das heisst? Keinerlei Ausgabe?
Dann hast Du irgendein Netzwerk oder DNS oder Proxy Problem, weil du von der npm Webseite scheinbar irgendwie nichts valides bekommst.

Geht ein ping registry.npmjs.org?

freaktech

@apollon77


pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $ ping registry.npmjs.org
PING registry.npmjs.org (104.16.27.35) 56(84) bytes of data.
64 bytes from 104.16.27.35: icmp_seq=1 ttl=59 time=14.2 ms
64 bytes from 104.16.27.35: icmp_seq=2 ttl=59 time=11.5 ms
64 bytes from 104.16.27.35: icmp_seq=3 ttl=59 time=10.9 ms
64 bytes from 104.16.27.35: icmp_seq=4 ttl=59 time=22.7 ms
64 bytes from 104.16.27.35: icmp_seq=5 ttl=59 time=13.8 ms
64 bytes from 104.16.27.35: icmp_seq=6 ttl=59 time=22.2 ms
64 bytes from 104.16.27.35: icmp_seq=7 ttl=59 time=20.4 ms
^C
--- registry.npmjs.org ping statistics ---
7 packets transmitted, 7 received, 0% packet loss, time 211ms
rtt min/avg/max/mdev = 10.865/16.514/22.680/4.706 ms
pi@iobrocker:/opt/iobroker $

freaktech

wie kann ich den Hue adapter auf 2.0.1 bringen er zeigt mir nur 2.0 an ?!? evtl fängt er sich dann wieder

AlCalzone

@freaktech sagte in PI4 Lässt JS Kontrolle nicht updaten:

wie kann ich den Hue adapter auf 2.0.1 bringen

Gar nicht. Dein npm funktioniert nicht richtig, d.h. du kannst weder einen Adapter noch JS-Controller aktualisieren.

wget -qO- https://registry.npmjs.org/

Apollon wollte die Ausgabe davon sehen. upgrade self kannst du erst mal sein lassen, bis du wieder dazu aufgefordert wirst.

freaktech

ok dann wart ich mal auf Vorschläge so bringts halt nix da der HUE nicht mehr läuft

host.iobrocker	2019-10-14 13:04:51.723	info	Restart adapter system.adapter.hue.0 because enabled
host.iobrocker	2019-10-14 13:04:51.723	error	instance system.adapter.hue.0 terminated with code 0 (OK)
host.iobrocker	2019-10-14 13:04:50.008	info	instance system.adapter.hue.0 started with pid 30347
host.iobrocker	2019-10-14 13:04:48.987	info	Restart adapter system.adapter.hue.0 because enabled
host.iobrocker	2019-10-14 13:04:48.987	error	instance system.adapter.hue.0 terminated with code 0 (OK)
host.iobrocker	2019-10-14 13:04:47.359	info	instance system.adapter.hue.0 started with pid 30339
host.iobrocker	2019-10-14 13:04:46.333	info	Restart adapter system.adapter.hue.0 because enabled
host.iobrocker	2019-10-14 13:04:46.333	error	instance system.adapter.hue.0 terminated with code 0 (OK)
host.iobrocker	2019-10-14 13:04:44.697	info	instance system.adapter.hue.0 started with pid 30331
host.iobrocker	2019-10-14 13:04:43.680	info	Restart adapter system.adapter.hue.0 because enabled
host.iobrocker	2019-10-14 13:04:43.680	error	instance system.adapter.hue.0 terminated with code 0 (OK)
host.iobrocker	2019-10-14 13:04:42.010	info	instance system.adapter.hue.0 started with pid 30324

AlCalzone

@freaktech sagte in PI4 Lässt JS Kontrolle nicht updaten:

dann wart ich mal auf Vorschläge

Liefer doch erst mal die Informationen, die Helfer von dir wollen.

Was ist die Ausgabe von

wget -qO- https://registry.npmjs.org/

?

Für hue:

In der Oberfläche stoppen
In die Konsole
cd /opt/iobroker/node_modules/iobroker.hue
node main.js --force --logs
Die Ausgabe von 4. hier posten.

AlCalzone

@freaktech Und hast du das

inzwischen gemacht? Was war die Ausgabe davon? Danach kannst du das Upgrade probieren.

freaktech

@AlCalzone said in PI4 Lässt JS Kontrolle nicht updaten:

wget -qO- https://registry.npmjs.org/


pi@iobrocker:/opt/iobroker $ wget -qO- https://registry.npmjs.org/
{"db_name":"registry","doc_count":1417354,"doc_del_count":340,"update_seq":5737861,"purge_seq":0,"compact_running":false,"disk_size":24759636103,"data_size":19681074249,"instance_start_time":"1570691704792381","disk_format_version":6,"committed_update_seq":5737861}pi@iobrocker:/opt/iobroker $

hier passiert aber nichts


pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $
pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $
pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ node main.js --force --logs
pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ node main.js --force --logs
pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $

freaktech

@AlCalzone


pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $ npm WARN using --force I sure hope you know what you are doing.
npm WARN using --force I sure hope you know what you are doing.

Usage: npm <command>

where <command> is one of:
    access, adduser, audit, bin, bugs, c, cache, ci, cit,
    clean-install, clean-install-test, completion, config,
    create, ddp, dedupe, deprecate, dist-tag, docs, doctor,
    edit, explore, get, help, help-search, hook, i, init,
    install, install-ci-test, install-test, it, link, list, ln,
    login, logout, ls, org, outdated, owner, pack, ping, prefix,
    profile, prune, publish, rb, rebuild, repo, restart, root,
    run, run-script, s, se, search, set, shrinkwrap, star,
    stars, start, stop, t, team, test, token, tst, un,
    uninstall, unpublish, unstar, up, update, v, version, view,
    whoami

npm <command> -h  quick help on <command>
npm -l            display full usage info
npm help <term>   search for help on <term>
npm help npm      involved overview

Specify configs in the ini-formatted file:
    /home/pi/.npmrc
or on the command line via: npm <command> --key value
Config info can be viewed via: npm help config

npm@6.12.0 /usr/local/lib/node_modules/npm

pi@iobrocker:/opt/iobroker $ pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $
-bash: pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue: Datei oder Verzeichnis nicht gefunden
pi@iobrocker:/opt/iobroker $

apollon77

@freaktech Ok, die Ausgabe sieht an sich ok aus von dem npm Ding.

Manueller Adapterstart: ist ioBroker auch gestartet auf dem Host? Der muss laufen sonst geht das nicht.

bzw mach mal:
´node main.js silly --force --logs`

apollon77

@freaktech Kommando sieht falsch aus

freaktech

pi@iobrocker:/opt/iobroker $ node main.js silly --force --logs
internal/modules/cjs/loader.js:583
    throw err;
    ^

Error: Cannot find module '/opt/iobroker/main.js'
    at Function.Module._resolveFilename (internal/modules/cjs/loader.js:581:15)
    at Function.Module._load (internal/modules/cjs/loader.js:507:25)
    at Function.Module.runMain (internal/modules/cjs/loader.js:742:12)
    at startup (internal/bootstrap/node.js:283:19)
    at bootstrapNodeJSCore (internal/bootstrap/node.js:743:3)
pi@iobrocker:/opt/iobroker $

AlCalzone

@freaktech sagte in PI4 Lässt JS Kontrolle nicht updaten:

pi@iobrocker:/opt/iobroker $ node main.js silly --force --logs

falscher Ordner

Was ist mit den anderen Befehlen, nach denen ich inzwischen 2x gefragt habe? Achte bitte darauf, dass du die Befehle richtig eintippst oder kopierst.
Die letzten Logs sehen mir so aus als kopierst du wild irgendwelche Warnmeldungen und/oder Logausgaben als Befehle.

freaktech

@apollon77 said in PI4 Lässt JS Kontrolle nicht updaten:

´node main.js silly --force --logs`

mach ich ja


pi@iobrocker:/opt/iobroker $ node main.js silly --force --logs
internal/modules/cjs/loader.js:583
    throw err;
    ^

Error: Cannot find module '/opt/iobroker/main.js'
    at Function.Module._resolveFilename (internal/modules/cjs/loader.js:581:15)
    at Function.Module._load (internal/modules/cjs/loader.js:507:25)
    at Function.Module.runMain (internal/modules/cjs/loader.js:742:12)
    at startup (internal/bootstrap/node.js:283:19)
    at bootstrapNodeJSCore (internal/bootstrap/node.js:743:3)
pi@iobrocker:/opt/iobroker $

was mach ich falsch?

apollon77

@freaktech Jetzt vergleich das mal mit dem was Du selbst weiter oben gepotet hast
https://forum.iobroker.net/post/310830
... ... ... ...
cd node_modules/iobroker.hue
vergessen?

freaktech

ja sorry ich bin wohl zu doof um es zu kapieren

diese vorgehensweise ist ja wohl auch falsch


pi@iobrocker:~ $ cd /opt/iobroker
pi@iobrocker:/opt/iobroker $ cd node_modules/iobroker.hue
pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $ node main.js silly --force --logs
pi@iobrocker:/opt/iobroker/node_modules/iobroker.hue $

AlCalzone

@freaktech Jetzt ist der Pfad schon mal richtig. Läuft trotzdem nicht... Vielleicht muss der nochmal installiert werden. Dazu müssen wir dein npm-Problem aber lösen.

Also... was ist jetzt hiermit?

apollon77

@freaktech Ok, Frage: kommt es direkt zurück der Befehl oder "Hängt er"?

freaktech

das bringt leider nichts


pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $ npm cache verify
Cache verified and compressed (~/.npm/_cacache):
Content verified: 0 (0 bytes)
Index entries: 0
Finished in 0.067s
pi@iobrocker:/opt/iobroker $ npm cache clean --force
npm WARN using --force I sure hope you know what you are doing.
pi@iobrocker:/opt/iobroker $


pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $ npm cche verify

Usage: npm <command>

where <command> is one of:
    access, adduser, audit, bin, bugs, c, cache, ci, cit,
    clean-install, clean-install-test, completion, config,
    create, ddp, dedupe, deprecate, dist-tag, docs, doctor,
    edit, explore, get, help, help-search, hook, i, init,
    install, install-ci-test, install-test, it, link, list, ln,
    login, logout, ls, org, outdated, owner, pack, ping, prefix,
    profile, prune, publish, rb, rebuild, repo, restart, root,
    run, run-script, s, se, search, set, shrinkwrap, star,
    stars, start, stop, t, team, test, token, tst, un,
    uninstall, unpublish, unstar, up, update, v, version, view,
    whoami

npm <command> -h  quick help on <command>
npm -l            display full usage info
npm help <term>   search for help on <term>
npm help npm      involved overview

Specify configs in the ini-formatted file:
    /home/pi/.npmrc
or on the command line via: npm <command> --key value
Config info can be viewed via: npm help config

npm@6.12.0 /usr/local/lib/node_modules/npm

Did you mean this?
    cache
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $
pi@iobrocker:/opt/iobroker $ npm cache verify
Cache verified and compressed (~/.npm/_cacache):
Content verified: 0 (0 bytes)
Index entries: 0
Finished in 0.067s
pi@iobrocker:/opt/iobroker $ npm cache clean --force
npm WARN using --force I sure hope you know what you are doing.
pi@iobrocker:/opt/iobroker $ ^C
pi@iobrocker:/opt/iobroker $ sudo iobroker stop
pi@iobrocker:/opt/iobroker $ sudo iobroker update
Used repository: latest
hash not changed, use actual sources
update done
Cannot read or parse /opt/iobroker/node_modules/iobroker.js-controller/lib/../node_modules/iobroker.hue/io-package.json: SyntaxError: Unexpected end of JSON input
Cannot read or parse /opt/iobroker/node_modules/iobroker.js-controller/lib/../node_modules/iobroker.hue/io-package.json: SyntaxError: Unexpected end of JSON input
Adapter    "admin"         : 3.6.9    , installed 3.6.9
Adapter    "admin-2"       : 2.0.10
Adapter    "alexa2"        : 2.6.4    , installed 2.6.4
Adapter    "alpha2"        : 1.0.0
Adapter    "amazon-dash"   : 0.3.1
Adapter    "artnet"        : 1.0.0
Adapter    "asterisk"      : 1.0.6
Adapter    "asuswrt"       : 1.0.1
Adapter    "b-control-em"  : 0.2.1
Adapter    "backitup"      : 1.2.0    , installed 1.2.0
Adapter    "beckhoff"      : 1.0.6
Adapter    "benq"          : 0.2.0
Adapter    "ble"           : 0.10.1
Adapter    "bmw"           : 1.4.0
Adapter    "boblight"      : 0.0.1
Adapter    "bosesoundtouch": 0.2.4
Adapter    "botvac"        : 1.0.0
Adapter    "bring"         : 1.6.5
Adapter    "broadlink2"    : 2.0.0
Adapter    "chromecast"    : 2.2.3
Adapter    "cloud"         : 2.6.2    , installed 2.6.2
Adapter    "comfoair"      : 0.3.2
Adapter    "contactid"     : 1.0.0
Adapter    "corrently"     : 0.0.2
Adapter    "countdown"     : 1.0.4
Adapter    "cul"           : 1.0.0
Adapter    "daikin"        : 1.0.5
Adapter    "daswetter"     : 2.8.1    , installed 2.8.1
Adapter    "deconz"        : 1.1.2
Adapter    "denon"         : 1.6.1
Adapter    "devices"       : 0.1.7
Adapter    "discovergy"    : 0.4.7
Adapter    "discovery"     : 2.0.0    , installed 2.0.0
Adapter    "doorbird"      : 0.1.5
Adapter    "ds18b20"       : 1.0.2
Adapter    "dwd"           : 2.4.3
Adapter    "ebus"          : 0.8.0
Adapter    "egigeozone"    : 0.1.2
Adapter    "ekey"          : 1.1.0
Adapter    "email"         : 1.0.5
Adapter    "emby"          : 1.0.0
Adapter    "energymanager" : 1.2.1
Adapter    "enet"          : 1.0.1
Adapter    "epson_stylus_px830": 0.2.1
Adapter    "fakeroku"      : 0.2.1
Adapter    "feiertage"     : 1.0.11
Adapter    "fhem"          : 1.3.0
Adapter    "find-my-iphone": 0.2.17
Adapter    "firetv"        : 0.0.33
Adapter    "flot"          : 1.9.2
Adapter    "foobar2000"    : 1.0.0
Adapter    "fritzbox"      : 0.2.1
Adapter    "fritzdect"     : 0.2.4
Adapter    "fronius"       : 1.0.5
Adapter    "fullcalendar"  : 0.2.4
Adapter    "fullybrowser"  : 1.0.1
Adapter    "g-homa"        : 0.5.1
Adapter    "geofency"      : 0.3.2
Adapter    "gruenbeck"     : 0.0.14
Adapter    "habpanel"      : 0.3.4
Adapter    "haier"         : 1.0.2
Adapter    "ham"           : 1.1.2
Adapter    "ham-wemo"      : 1.0.1
Adapter    "harmony"       : 1.2.2
Adapter    "hass-mqtt"     : 0.0.7
Adapter    "heatingcontrol": 0.2.3
Adapter    "heytech"       : 0.1.4
Adapter    "hid"           : 0.1.17
Adapter    "hilink"        : 0.2.7
Adapter    "history"       : 1.8.7
Adapter    "hm-rega"       : 2.4.12
Adapter    "hm-rpc"        : 1.10.0
Adapter    "hmip"          : 0.0.11
Adapter    "hombot"        : 0.1.3
Adapter    "homeconnect"   : 0.0.24
Adapter    "homee"         : modified
Adapter    "homepilot"     : 1.0.3
Adapter    "hp-ilo"        : 1.0.1
Adapter    "hs100"         : 1.0.10
Adapter    "hue"           : 2.0.0
Adapter    "hue-extended"  : 0.9.0
Adapter    "hyperion"      : 0.0.9
Adapter    "i2c"           : 0.0.6
Adapter    "ical"          : 1.7.0    , installed 1.7.0
Adapter    "icons-addictive-flavour-png": 0.1.0
Adapter    "icons-fatcow-hosting": 0.1.0
Adapter    "icons-icons8"  : 0.0.1
Adapter    "icons-material-png": 0.1.0
Adapter    "icons-material-svg": 0.1.0
Adapter    "icons-mfd-png" : 1.0.2
Adapter    "icons-mfd-svg" : 1.0.2
Adapter    "icons-open-icon-library-png": 0.1.3
Adapter    "icons-ultimate-png": 1.0.1
Adapter    "influxdb"      : 1.6.3
Adapter    "info"          : 1.5.5    , installed 1.5.5
Adapter    "innogy-smarthome": 0.3.3
Adapter    "intesishome"   : 0.1.2
Adapter    "iogo"          : 0.4.13
Adapter    "iot"           : 1.1.8
Adapter    "iqontrol"      : 0.2.12
Adapter    "javascript"    : 4.3.0    , installed 4.3.0
Adapter    "jeelink"       : 0.1.3
Controller "js-controller" : 2.0.29   , installed 1.5.14 [Updateable]
Adapter    "js2fs"         : 0.1.5    , installed 0.1.5
Adapter    "kecontact"     : 0.1.0
Adapter    "klf200"        : 0.9.5
Adapter    "km200"         : 2.0.3
Adapter    "knmi-weather"  : 0.1.1
Adapter    "knx"           : 1.0.35
Adapter    "kodi"          : 1.0.0
Adapter    "kress"         : 2.5.5
Adapter    "landroid"      : 1.0.3
Adapter    "lcn"           : 0.4.2
Adapter    "letrika_comgw" : 0.0.4
Adapter    "lgtv"          : 1.0.8
Adapter    "lgtv-rs"       : 0.0.4
Adapter    "lgtv11"        : 1.0.5
Adapter    "lifx"          : 0.1.0
Adapter    "lightify"      : 0.2.16
Adapter    "link"          : 0.4.4
Adapter    "linkeddevices" : 1.0.1
Adapter    "lovelace"      : 0.1.5
Adapter    "loxone"        : 1.0.0
Adapter    "luftdaten"     : 0.0.7
Adapter    "lupusec"       : 1.2.0
Adapter    "luxtronik1"    : 0.0.7
Adapter    "material"      : 0.10.6
Adapter    "maxcube"       : 0.1.2    , installed 0.1.2
Adapter    "maxcul"        : 1.1.2
Adapter    "mbus"          : 1.1.1
Adapter    "mclighting"    : 0.0.12
Adapter    "megad"         : 1.2.1
Adapter    "megadd"        : 0.2.0
Adapter    "megaesp"       : 0.1.0
Adapter    "mercedesme"    : 0.0.16
Adapter    "meross"        : 1.0.0
Adapter    "meteoalarm"    : 1.0.5
Adapter    "miele"         : 0.1.5
Adapter    "mihome"        : 1.2.8
Adapter    "mihome-airpurifier": 0.0.6
Adapter    "mihome-lamp"   : 1.1.0
Adapter    "mihome-plug"   : 0.2.0
Adapter    "mihome-vacuum" : 1.1.5
Adapter    "miio"          : 0.0.13
Adapter    "mikrotik"      : 1.0.4
Adapter    "milight"       : 0.3.6
Adapter    "milight-smart-light": 0.2.7
Adapter    "mobile"        : 0.5.0
Adapter    "modbus"        : 3.0.0
Adapter    "moma"          : 1.2.2
Adapter    "mpd"           : 1.0.2
Adapter    "mqtt"          : 2.1.1    , installed 2.1.1
Adapter    "mqtt-client"   : 1.1.1
Adapter    "multicast"     : 0.1.1
Adapter    "musiccast"     : 0.1.2
Adapter    "mysensors"     : 2.0.0
Adapter    "nanoleaf-lightpanels": 0.8.2
Adapter    "nello"         : 2.0.8
Adapter    "netatmo"       : 1.3.1
Adapter    "nibeuplink"    : 0.2.2
Adapter    "nina"          : 0.0.13
Adapter    "node-red"      : 1.12.0
Adapter    "nuki"          : 1.0.7
Adapter    "nuki2"         : 1.0.4
Adapter    "nut"           : 1.1.3
Adapter    "oilfox"        : 0.0.7
Adapter    "onkyo"         : 2.0.3
Adapter    "onvif"         : modified
Adapter    "openhab"       : 1.1.0
Adapter    "opentherm"     : 0.1.9
Adapter    "openweathermap": modified
Adapter    "opi"           : 0.1.1    , installed 0.1.1
Adapter    "oppoplayer"    : 0.2.1
Adapter    "owfs"          : 0.6.1
Adapter    "owntracks"     : 0.6.2
Adapter    "panasonic-viera": 1.0.2
Adapter    "parser"        : 1.0.7
Adapter    "paw"           : 0.3.2
Adapter    "phantomjs"     : 1.0.1
Adapter    "pi-hole"       : 1.2.1
Adapter    "piface"        : 1.0.0
Adapter    "pimatic"       : 0.1.5
Adapter    "ping"          : 1.3.2
Adapter    "places"        : 0.7.0
Adapter    "plex"          : 0.6.0
Adapter    "plexconnect"   : 0.0.7
Adapter    "pollenflug"    : 1.0.3
Adapter    "primelab"      : 1.0.2
Adapter    "proxmox"       : 0.5.1
Adapter    "proxy"         : 1.1.1
Adapter    "pushbullet"    : 0.0.11
Adapter    "pushover"      : 1.1.1    , installed 1.1.1
Adapter    "pushsafer"     : 0.1.8
Adapter    "radar2"        : 1.0.9
Adapter    "radiohead"     : 1.0.2
Adapter    "rflink"        : 2.0.0
Adapter    "rickshaw"      : 1.0.0
Adapter    "ring"          : 1.0.5
Adapter    "roadtraffic"   : 0.0.2
Adapter    "roomba"        : 1.0.7
Adapter    "rpi2"          : 1.1.1
Adapter    "s7"            : 1.1.4
Adapter    "samsung"       : 0.2.9
Adapter    "sayit"         : 1.8.2
Adapter    "sbfspot"       : 2.3.2
Adapter    "scenes"        : 1.1.0
Adapter    "schoolfree"    : 0.2.2
Adapter    "shelly"        : 3.1.1    , installed 3.1.1
Adapter    "shuttercontrol": 0.3.2
Adapter    "sia"           : 1.0.3
Adapter    "siegenia"      : 1.0.0
Adapter    "simple-api"    : 2.3.1    , installed 2.3.1
Adapter    "sma-em"        : 0.5.3
Adapter    "smappee"       : 0.2.2
Adapter    "smartmeter"    : 1.2.2
Adapter    "snips"         : 1.5.0
Adapter    "snmp"          : 0.5.0
Adapter    "socketio"      : 2.1.2    , installed 2.1.2
Adapter    "solarlog"      : 0.1.5
Adapter    "solarwetter"   : 1.0.0
Adapter    "sonnen"        : 1.3.0
Adapter    "sonoff"        : 2.2.2
Adapter    "sonos"         : 2.0.0
Adapter    "sonus"         : 0.1.1
Adapter    "sony-bravia"   : 1.0.1
Adapter    "sourceanalytix": 0.2.5
Adapter    "spotify-premium": 1.0.0
Adapter    "sql"           : 1.9.5
Adapter    "squeezebox"    : 1.0.0
Adapter    "squeezeboxrpc" : 0.8.18
Adapter    "starline"      : 1.0.0
Adapter    "statistics"    : 0.2.2
Adapter    "stiebel-isg"   : 1.4.7
Adapter    "synology"      : 0.0.4
Adapter    "systeminfo"    : 0.2.2
Adapter    "tankerkoenig"  : 2.0.6
Adapter    "telegram"      : 1.4.3    , installed 1.4.3
Adapter    "terminal"      : 0.1.2    , installed 0.1.2
Adapter    "text2command"  : 1.3.0
Adapter    "tileboard"     : modified
Adapter    "tinker"        : 0.1.4
Adapter    "tr-064"        : 0.4.18
Adapter    "tradfri"       : 2.4.4
Adapter    "tunnelbroker-endpoint-updater": modified
Adapter    "tuya"          : 3.0.0
Adapter    "tvspielfilm"   : 1.0.4
Adapter    "unifi"         : 0.3.1
Adapter    "upnp"          : 1.0.14
Adapter    "valloxmv"      : 1.0.0
Adapter    "vcard"         : 0.0.9
Adapter    "viessmann"     : 1.2.2
Adapter    "viessmannapi"  : 1.3.2
Adapter    "virtualpowermeter": 1.0.1
Adapter    "vis"           : 1.2.1    , installed 1.2.1
Adapter    "vis-bars"      : 0.1.4
Adapter    "vis-canvas-gauges": 0.1.5
Adapter    "vis-colorpicker": 1.1.1   , installed 1.1.1
Adapter    "vis-fancyswitch": 1.1.0   , installed 1.1.0
Adapter    "vis-google-fonts": 0.1.0
Adapter    "vis-history"   : 1.0.0
Adapter    "vis-hqwidgets" : 1.1.2    , installed 1.1.2
Adapter    "vis-jqui-mfd"  : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage"  : 1.0.1
Adapter    "vis-keyboard"  : 0.0.2
Adapter    "vis-lcars"     : 1.0.4
Adapter    "vis-map"       : 1.0.2
Adapter    "vis-material"  : 0.1.3
Adapter    "vis-metro"     : 1.1.2
Adapter    "vis-players"   : 0.1.5
Adapter    "vis-plumb"     : 1.0.2
Adapter    "vis-rgraph"    : 0.0.2
Adapter    "vis-timeandweather": 1.1.7   , installed 1.1.7
Adapter    "vis-weather"   : 2.3.0
Adapter    "vr200"         : 1.0.0
Adapter    "weatherunderground": 3.1.3
Adapter    "web"           : 2.4.5    , installed 2.4.5
Adapter    "wetty"         : 0.1.1
Adapter    "wiffi-wz"      : 2.1.4
Adapter    "wifilight"     : 0.2.0
Adapter    "wlanthermo-nano": 0.1.1
Adapter    "wm-bus"        : 0.3.1
Adapter    "wolf"          : 0.9.2
Adapter    "worx"          : 0.4.0
Adapter    "xbox"          : 0.5.8
Adapter    "xs1"           : 1.0.2
Adapter    "yahka"         : 0.9.2
Adapter    "yamaha"        : 0.3.19
Adapter    "yeelight-2"    : 1.0.1
Adapter    "yr"            : 2.0.3
Adapter    "zigbee"        : 0.11.3
Adapter    "zont"          : 0.5.3
Adapter    "zwave"         : 1.6.3
Adapter    "zwave2"        : 0.1.3
pi@iobrocker:/opt/iobroker $ sudo iobroker upgrade self
Update js-controller from @1.5.14 to @2.0.29
NPM version: 6.12.0
npm install iobroker.js-controller@2.0.29 --unsafe-perm --production --save --prefix "/opt/iobroker" (System call)
npm WARN registry Unexpected warning for https://registry.npmjs.org/: Miscellaneous Warning ENODATA: Cache input stream was empty
npm WARN registry Using stale data from https://registry.npmjs.org/ due to a request error during revalidation.
npm ERR! code EINTEGRITY
npm ERR! errno EINTEGRITY
npm ERR! Invalid response body while trying to fetch https://registry.npmjs.org/y18n: Integrity verification failed for sha512-nT7014PDaWpa3jrXmq1tS07aiudLEjWmD1iEbLzOxO/4+6DMqVptZ1Scz5PnnN/haHCZTAmWOMNvHKfY32wv9A== (/home/iobroker/.npm/_cacache/content-v2/sha512/9d/3e/f4d783c3696a5ade3ad79aad6d4b4eda8ae74b1235a60f58846cbccec4eff8fba0cca95a6d67549ccf93e79cdfe16870994c099638c36f1ca7d8df6c2ff4)

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2019-10-14T12_19_41_959Z-debug.log
Host "iobrocker" (linux) updated
Execute: chmod -R 777 /opt/iobroker
Chmod finished. Restart controller
Starting node restart.js
pi@iobrocker:/opt/iobroker $

freaktech

@apollon77

mehr als was ich gepostet habe passiert nicht

Community Forum

NEWS

PI4 Lässt JS Kontrolle nicht updaten

Support us

514

32.9k

83.0k

1.3m