Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[spicer]

Ich hab beim Waveshare und Wechselrichter bereits alles ausprobiert.
A und B getauscht, Endwiderstand rein (obschon die Leitung nur 120cm lang ist) usw.

"iob nodejs-update" werd ich gleich machen.

[Homoran]

@spicer sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

Hier, um meine "unschuld" zu beweisen ^^

dann hast du den Filter im log wahrscheinlich auf Info

[spicer]

@Thomas-Braun sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

@spicer sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

node: v20.20.0

iob nodejs-update

dringend ausführen.

Nothing to do - Your installation is using the correct paths.

You are missing the nodesource.list or
you want to change your current nodejs version: v20.20.0 ?

Ist den v20 veraltet?

[spicer]

@Homoran sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

@spicer sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

Hier, um meine "unschuld" zu beweisen ^^

dann hast du den Filter im log wahrscheinlich auf Info

	
Zeit
	
	
modbus.0
	2026-02-04 21:13:58.778	info	Disconnected from slave 192.168.1.101
modbus.0
	2026-02-04 21:13:58.777	debug	Closing client on purpose.
modbus.0
	2026-02-04 21:13:57.777	debug	Cleaning up request fifo.
modbus.0
	2026-02-04 21:13:57.777	debug	Clearing timeout of the current request.
modbus.0
	2026-02-04 21:13:57.776	debug	Socket closed with error
modbus.0
	2026-02-04 21:13:51.738	debug	Sending pdu to the socket.
modbus.0
	2026-02-04 21:13:51.737	debug	[DevID_1/holdingRegs] Poll address 1156 - 1 registers
modbus.0
	2026-02-04 21:13:51.737	debug	[DevID_1] Poll start ---------------------
modbus.0
	2026-02-04 21:13:51.735	info	Connected to slave
modbus.0
	2026-02-04 21:13:26.697	info	Disconnected from slave 192.168.1.101
modbus.0
	2026-02-04 21:13:26.695	debug	Closing client on purpose.
modbus.0
	2026-02-04 21:13:25.693	debug	Cleaning up request fifo.
modbus.0
	2026-02-04 21:13:25.693	debug	Clearing timeout of the current request.
modbus.0
	2026-02-04 21:13:25.692	debug	Socket closed with error
modbus.0
	2026-02-04 21:13:19.660	debug	Sending pdu to the socket.
modbus.0
	2026-02-04 21:13:19.657	debug	[DevID_1/holdingRegs] Poll address 1156 - 1 registers
modbus.0
	2026-02-04 21:13:19.656	debug	Initialization of scale factors done!
modbus.0
	2026-02-04 21:13:19.653	debug	[DevID_1] Poll start ---------------------
modbus.0
	2026-02-04 21:13:19.652	info	Connected to slave
modbus.0
	2026-02-04 21:13:19.340	debug	Add holdingRegisters._1540Voltage_Bat1: {"_id":"holdingRegisters._1540Voltage_Bat1","type":"state","common":{"name":"","role":"value","type":"number","read":true,"write":true,"def":0,"unit":"V"},"native":{"regType":"holdingRegs","address":1540,"deviceId":1,"type":"uint16be","len":1,"offset":0,"factor":0.1,"poll":true}}
modbus.0
	2026-02-04 21:13:19.339	debug	Add holdingRegisters._Frequency_Grid: {"_id":"holdingRegisters._Frequency_Grid","type":"state","common":{"name":"","role":"value","type":"number","read":true,"write":true,"def":0,"unit":"Hz"},"native":{"regType":"holdingRegs","address":1156,"deviceId":1,"type":"uint16be","len":1,"offset":0,"factor":0.01,"poll":true}}
modbus.0
	2026-02-04 21:13:19.339	debug	Initialize Objects for holdingRegs: [{"_address":1156,"name":"Frequency_Grid","description":"","unit":"Hz","type":"uint16be","len":1,"factor":0.01,"offset":0,"formula":"","role":"value","room":"","poll":true,"wp":"","cw":"","isScale":"","address":1156,"deviceId":1,"id":"holdingRegisters._Frequency_Grid"},{"_address":1540,"name":"1540Voltage_Bat1","description":"","unit":"V","type":"uint16be","len":1,"factor":0.1,"offset":0,"formula":"","role":"value","room":"","poll":true,"wp":"","cw":"","isScale":"","address":1540,"deviceId":1,"id":"holdingRegisters._1540Voltage_Bat1"}]
modbus.0
	2026-02-04 21:13:19.338	debug	Initialize Objects for inputRegs: []
modbus.0
	2026-02-04 21:13:19.338	debug	Initialize Objects for coils: []
modbus.0
	2026-02-04 21:13:19.337	debug	Initialize Objects for disInputs: []
modbus.0
	2026-02-04 21:13:19.121	info	starting. Version 6.3.2 in /opt/iobroker/node_modules/iobroker.modbus, node: v20.20.0, js-controller: 7.0.7
modbus.0
	2026-02-04 21:13:18.693	debug	Plugin sentry Initialize Plugin (enabled=true)

[Thomas Braun]

@spicer sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

Ist den v20 veraltet?

Ja. 22 ist schon geraume Zeit die Empfehlung und nodejs 20 wird in ein paar Wochen das 'End-of-Life' erreichen.
Es ist dringend an der Zeit den Gaul zu wechseln.

you want to change your current nodejs version: v20.20.0 ?

Ja, willst du.

[Homoran]

@spicer sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

"regType":"holdingRegs","address":1156,

das ist jetzt ok

das hier

@spicer sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

Socket closed with error

aber nicht.
deswegen der dauernde Neustart

das Problem kann/wird am rs485toEth liegen.
Damit kenne ich mich aber nicht aus

[Homoran]

@spicer sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

Mein Waveshare hat nicht die gleiche Eingabemaske.

aber wahrscheinlich vergleichbare Felder.

So hast du bei iob RTUoverTCP strhen,@willik nur TCP, da sein waveshare ein tcp server ist.

Hast du das mal verglichen/getestet?

[spicer]

@Homoran sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

@spicer sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

Mein Waveshare hat nicht die gleiche Eingabemaske.

aber wahrscheinlich vergleichbare Felder.

So hast du bei iob RTUoverTCP strhen,@willik nur TCP, da sein waveshare ein tcp server ist.

Hast du das mal verglichen/getestet?

Du bist mein Held. Mit TCP klappt es.
Mann, über seit 1 Jahr :D

Ich vermute, dass auch der Kabelwechsel heute etwas gebracht hat. Habe ein abgeschirmtes eingebaut. Standard bei Auslieferung war ein gewöhnliches TD 12x0.75.

[spicer]

Welcher Parameter ist das Total für Battery Power und SOC?
Ich sehe in der xls Tabelle nur Parameter für Bat1, Bat2 usw.
Ich habe 4 Batterien dran.

[RISSN]

Warum nimmst du nicht einen Stick? Die Sticks für den Sofar mit LAN können auch Modbus, nutze ich so schon ein Jahr, geht super und die Daten gehen auch gleich in die App

[spicer]

Hab ich auch gehört, dass der lan Stick das kann. Wäre die nächste Variante gewesen, wenn das mit der rs485 nicht geklappt hätte.

[spicer]

Habe nun ein anderes Problem.
Nach 1-2h kommt ein "Socket closed with error". Dann geht nichts mehr.
Siehe Log ab 18:22:55

2026-02-05 18:22:43.831  - debug: modbus.0 (914062) [DevID_1] Poll start ---------------------
2026-02-05 18:22:43.832  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-05 18:22:43.899  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 DONE
2026-02-05 18:22:44.150  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1160 - 1 registers
2026-02-05 18:22:44.209  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1160 DONE
2026-02-05 18:22:44.459  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1476 - 1 registers
2026-02-05 18:22:44.519  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1476 DONE
2026-02-05 18:22:44.770  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1542 - 1 registers
2026-02-05 18:22:44.829  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1542 DONE
2026-02-05 18:22:45.080  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1544 - 1 registers
2026-02-05 18:22:45.139  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1544 DONE
2026-02-05 18:22:45.389  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1668 - 2 registers
2026-02-05 18:22:45.469  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1668 DONE
2026-02-05 18:22:49.101  - debug: modbus.0 (914062) [DevID_1] Poll start ---------------------
2026-02-05 18:22:49.102  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-05 18:22:49.159  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 DONE
2026-02-05 18:22:49.161  - debug: modbus.0 (914062) [DevID_1] Poll start ---------------------
2026-02-05 18:22:49.161  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-05 18:22:49.219  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 DONE
2026-02-05 18:22:49.221  - debug: modbus.0 (914062) [DevID_1] Poll start ---------------------
2026-02-05 18:22:49.221  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-05 18:22:49.279  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 DONE
2026-02-05 18:22:49.281  - debug: modbus.0 (914062) [DevID_1] Poll start ---------------------
2026-02-05 18:22:49.281  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-05 18:22:49.352  - debug: modbus.0 (914062) [DevID_1] Poll start ---------------------
2026-02-05 18:22:49.352  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-05 18:22:49.410  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1160 - 1 registers
2026-02-05 18:22:49.470  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1160 - 1 registers
2026-02-05 18:22:49.530  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1160 - 1 registers
2026-02-05 18:22:51.023  - debug: modbus.0 (914062) [DevID_1] Poll start ---------------------
2026-02-05 18:22:51.023  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-05 18:22:55.300  - debug: modbus.0 (914062) Socket closed with error
2026-02-05 18:22:55.300  - debug: modbus.0 (914062) Clearing timeout of the current request.
2026-02-05 18:22:55.300  - debug: modbus.0 (914062) Cleaning up request fifo.
2026-02-05 18:22:56.302  - debug: modbus.0 (914062) Closing client on purpose.
2026-02-05 18:22:56.303  - info: modbus.0 (914062) Disconnected from slave 192.168.88.101
2026-02-05 18:23:03.307  - info: modbus.0 (914062) Connected to slave 192.168.88.101
2026-02-05 18:23:03.307  - debug: modbus.0 (914062) [DevID_1] Poll start ---------------------
2026-02-05 18:23:03.307  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-05 18:23:09.341  - debug: modbus.0 (914062) Socket closed with error
2026-02-05 18:23:09.341  - debug: modbus.0 (914062) Clearing timeout of the current request.
2026-02-05 18:23:09.341  - debug: modbus.0 (914062) Cleaning up request fifo.
2026-02-05 18:23:10.341  - debug: modbus.0 (914062) Closing client on purpose.
2026-02-05 18:23:10.341  - info: modbus.0 (914062) Disconnected from slave 192.168.88.101
2026-02-05 18:23:17.345  - info: modbus.0 (914062) Connected to slave 192.168.88.101
2026-02-05 18:23:17.345  - debug: modbus.0 (914062) [DevID_1] Poll start ---------------------
2026-02-05 18:23:17.345  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-05 18:23:23.371  - debug: modbus.0 (914062) Socket closed with error
2026-02-05 18:23:23.371  - debug: modbus.0 (914062) Clearing timeout of the current request.
2026-02-05 18:23:23.371  - debug: modbus.0 (914062) Cleaning up request fifo.
2026-02-05 18:23:24.372  - debug: modbus.0 (914062) Closing client on purpose.
2026-02-05 18:23:24.373  - info: modbus.0 (914062) Disconnected from slave 192.168.88.101
2026-02-05 18:23:31.375  - info: modbus.0 (914062) Connected to slave 192.168.88.101
2026-02-05 18:23:31.376  - debug: modbus.0 (914062) [DevID_1] Poll start ---------------------
2026-02-05 18:23:31.376  - debug: modbus.0 (914062) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-05 18:23:37.401  - debug: modbus.0 (914062) Socket closed with error
2026-02-05 18:23:37.402  - debug: modbus.0 (914062) Clearing timeout of the current request.
2026-02-05 18:23:37.402  - debug: modbus.0 (914062) Cleaning up request fifo.
2026-02-05 18:23:38.402  - debug: modbus.0 (914062) Closing client on purpose.
2026-02-05 18:23:38.402  - info: modbus.0 (914062) Disconnected from slave 192.168.88.101

Wenn ich den modbus Adapter neu starte, läuft's wieder.

[spicer]

Ergänzend fällt mir auf, dass der immer mit einem "Socket closed with error" abschliesst.

modbus.0
	2026-02-05 19:19:38.941	info	Disconnected from slave 192.168.88.101
modbus.0
	2026-02-05 19:19:38.940	debug	Closing client on purpose.
modbus.0
	2026-02-05 19:19:37.940	debug	Cleaning up request fifo.
modbus.0
	2026-02-05 19:19:37.939	debug	Clearing timeout of the current request.
modbus.0
	2026-02-05 19:19:37.939	debug	Socket closed with error
modbus.0
	2026-02-05 19:19:31.988	debug	[DevID_1/holdingRegs] Poll address 1668 DONE
modbus.0
	2026-02-05 19:19:31.919	debug	[DevID_1/holdingRegs] Poll address 1668 - 2 registers
modbus.0
	2026-02-05 19:19:31.668	debug	[DevID_1/holdingRegs] Poll address 1544 DONE
modbus.0
	2026-02-05 19:19:31.609	debug	[DevID_1/holdingRegs] Poll address 1544 - 1 registers
modbus.0
	2026-02-05 19:19:31.358	debug	[DevID_1/holdingRegs] Poll address 1542 DONE
modbus.0
	2026-02-05 19:19:31.299	debug	[DevID_1/holdingRegs] Poll address 1542 - 1 registers
modbus.0
	2026-02-05 19:19:31.048	debug	[DevID_1/holdingRegs] Poll address 1476 DONE
modbus.0
	2026-02-05 19:19:30.988	debug	[DevID_1/holdingRegs] Poll address 1476 - 1 registers
modbus.0
	2026-02-05 19:19:30.738	debug	[DevID_1/holdingRegs] Poll address 1160 DONE
modbus.0
	2026-02-05 19:19:30.679	debug	[DevID_1/holdingRegs] Poll address 1160 - 1 registers
modbus.0
	2026-02-05 19:19:30.428	debug	[DevID_1/holdingRegs] Poll address 1157 DONE
modbus.0
	2026-02-05 19:19:30.364	debug	[DevID_1/holdingRegs] Poll address 1157 - 1 registers
modbus.0
	2026-02-05 19:19:30.364	debug	[DevID_1] Poll start ---------------------

Einstellungen:

[spicer]

Schon wieder. Adapter lief ca 3-4h.
Man siehe den Log ab 2026-02-06 03:59:39.013.
Da stirbt die Übertragung langsam bis ab 2026-02-06 03:59:56.664 nix mehr kommt.
Wie bereits gesagt, funktioniert alles wieder nach einem Adapter neustart.

2026-02-06 03:59:02.830  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 03:59:02.831  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 03:59:02.831  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 03:59:02.897  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 DONE
2026-02-06 03:59:03.148  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1160 - 1 registers
2026-02-06 03:59:03.207  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1160 DONE
2026-02-06 03:59:03.458  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1476 - 1 registers
2026-02-06 03:59:03.517  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1476 DONE
2026-02-06 03:59:03.768  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1542 - 1 registers
2026-02-06 03:59:03.827  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1542 DONE
2026-02-06 03:59:04.078  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1544 - 1 registers
2026-02-06 03:59:04.138  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1544 DONE
2026-02-06 03:59:04.388  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1668 - 2 registers
2026-02-06 03:59:04.477  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1668 DONE
2026-02-06 03:59:10.408  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 03:59:10.408  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 03:59:10.408  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 03:59:11.409  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 03:59:11.410  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101
2026-02-06 03:59:21.412  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 03:59:21.413  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 03:59:21.413  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 03:59:21.478  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 DONE
2026-02-06 03:59:21.729  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1160 - 1 registers
2026-02-06 03:59:21.788  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1160 DONE
2026-02-06 03:59:22.039  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1476 - 1 registers
2026-02-06 03:59:22.098  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1476 DONE
2026-02-06 03:59:22.349  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1542 - 1 registers
2026-02-06 03:59:22.408  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1542 DONE
2026-02-06 03:59:22.659  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1544 - 1 registers
2026-02-06 03:59:22.738  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1544 DONE
2026-02-06 03:59:22.989  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1668 - 2 registers
2026-02-06 03:59:23.048  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1668 DONE
2026-02-06 03:59:28.009  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 03:59:28.009  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 03:59:28.009  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 03:59:29.011  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 03:59:29.011  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101
2026-02-06 03:59:39.013  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 03:59:39.014  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 03:59:39.014  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 03:59:39.079  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 DONE
2026-02-06 03:59:39.330  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1160 - 1 registers
2026-02-06 03:59:39.389  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1160 DONE
2026-02-06 03:59:39.639  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1476 - 1 registers
2026-02-06 03:59:45.659  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 03:59:45.660  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 03:59:45.660  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 03:59:46.660  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 03:59:46.661  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101
2026-02-06 03:59:56.664  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 03:59:56.664  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 03:59:56.665  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 04:00:02.690  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 04:00:02.690  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 04:00:02.690  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 04:00:03.692  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 04:00:03.692  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101
2026-02-06 04:00:13.696  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 04:00:13.696  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 04:00:13.696  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 04:00:19.720  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 04:00:19.720  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 04:00:19.720  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 04:00:20.721  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 04:00:20.722  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101
2026-02-06 04:00:30.725  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 04:00:30.726  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 04:00:30.726  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 04:00:36.751  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 04:00:36.751  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 04:00:36.751  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 04:00:37.752  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 04:00:37.753  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101
2026-02-06 04:00:47.756  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 04:00:47.757  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 04:00:47.757  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 04:00:53.781  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 04:00:53.782  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 04:00:53.782  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 04:00:54.782  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 04:00:54.783  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101
2026-02-06 04:01:04.785  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 04:01:04.786  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 04:01:04.786  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 04:01:10.812  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 04:01:10.812  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 04:01:10.813  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 04:01:11.812  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 04:01:11.813  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101
2026-02-06 04:01:21.815  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 04:01:21.816  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 04:01:21.816  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 04:01:27.843  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 04:01:27.843  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 04:01:27.843  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 04:01:28.845  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 04:01:28.845  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101

Konfiguration:

[Homoran]

@spicer sagte in Sofar Solar HYD10 KTL Wechselrichter an modbus Adapter:

Da stirbt die Übertragung langsam bis ab 2026-02-06 03:59:56.664 nix mehr kommt.

was startet bei dir um 04:00?

[spicer]

Laut Log nichts zur Fraglichen Zeit.
Die gelesenen Register nehmen schon vor sofarcloud und weathersense ab.

2026-02-06 03:59:39.013  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 03:59:39.014  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 03:59:39.014  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 03:59:39.079  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 DONE
2026-02-06 03:59:39.330  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1160 - 1 registers
2026-02-06 03:59:39.389  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1160 DONE
2026-02-06 03:59:39.639  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1476 - 1 registers
2026-02-06 03:59:45.659  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 03:59:45.660  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 03:59:45.660  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 03:59:46.660  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 03:59:46.661  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101
2026-02-06 03:59:56.664  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 03:59:56.664  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 03:59:56.665  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 04:00:02.690  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 04:00:02.690  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 04:00:02.690  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 04:00:03.692  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 04:00:03.692  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101
2026-02-06 04:00:07.029  - info: host.iobroker instance system.adapter.weathersense.0 in version "4.2.1" started with pid 933290
2026-02-06 04:00:09.479  - info: weathersense.0 (933290) starting. Version 4.2.1 in /opt/iobroker/node_modules/iobroker.weathersense, node: v22.22.0, js-controller: 7.0.7
2026-02-06 04:00:09.509  - info: weathersense.0 (933290) Start cloud query after 20 Seconds...
2026-02-06 04:00:13.696  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 04:00:13.696  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 04:00:13.696  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 04:00:19.720  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 04:00:19.720  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 04:00:19.720  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 04:00:20.721  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 04:00:20.722  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101
2026-02-06 04:00:29.030  - info: host.iobroker instance system.adapter.sofarcloud.0 in version "3.3.0" started with pid 933306
2026-02-06 04:00:30.725  - info: modbus.0 (919438) Connected to slave 192.168.88.101
2026-02-06 04:00:30.726  - debug: modbus.0 (919438) [DevID_1] Poll start ---------------------
2026-02-06 04:00:30.726  - debug: modbus.0 (919438) [DevID_1/holdingRegs] Poll address 1157 - 1 registers
2026-02-06 04:00:31.877  - info: sofarcloud.0 (933306) starting. Version 3.3.0 in /opt/iobroker/node_modules/iobroker.sofarcloud, node: v22.22.0, js-controller: 7.0.7
2026-02-06 04:00:32.002  - info: sofarcloud.0 (933306) Start cloud query after 112 seconds...
2026-02-06 04:00:32.413  - info: weathersense.0 (933290) Terminated (NO_ERROR): Everything done. Going to terminate till next schedule
2026-02-06 04:00:32.952  - info: host.iobroker instance system.adapter.weathersense.0 having pid 933290 terminated with code 0 (NO_ERROR)
2026-02-06 04:00:36.751  - debug: modbus.0 (919438) Socket closed with error
2026-02-06 04:00:36.751  - debug: modbus.0 (919438) Clearing timeout of the current request.
2026-02-06 04:00:36.751  - debug: modbus.0 (919438) Cleaning up request fifo.
2026-02-06 04:00:37.752  - debug: modbus.0 (919438) Closing client on purpose.
2026-02-06 04:00:37.753  - info: modbus.0 (919438) Disconnected from slave 192.168.88.101

[spicer]

Aber ist schon auffällig, dass es immer um die gleiche Zeit passiert.
Kann ich iwie den Adapter immer um 4:01 neu starten?

[spicer]

Jetzt hat es um 2026-02-06 16:04:24.546 angefangen. Nach nur ein paar Minuten!

Mir gefällt das "Socket closed with error" jedesmal nicht.
Das könnte doch irgend etwas füllen bis zum Crash.
Sauber ist das auf jeden Fall nicht.

[RISSN]

https://www.solarvie.at/en-eu/products/sofarsolar-ethernet-dongle-lse-3

kaufe dir einfach dieses Teil und du hast Ruhe, 55 Euro kostet weniger als die Nerven die du lassen musst. Vor allem hast du es gleich auch noch in der App

[spicer]

Habe mir eine eigene Lösung geschrieben, welche ich euch nicht vorenthalten möchte.
Habe in einem LXC, welcher für diverse Skripte zuständig ist, folgendes Python Script drauf gemacht plus eine config.yaml .
Dies sendet die Sofar-Daten per MQTT an den ioBroker.

/opt/modbus-mqtt/modbus_tcp_rtu.py

#!/usr/bin/env python3

import socket
import struct
import time
import yaml
import logging
import paho.mqtt.client as mqtt
import os
import re

CONFIG_FILE = "/opt/modbus-mqtt/config.yaml"
LOG_FILE = "/var/log/modbus-mqtt.log"

logging.basicConfig(
    filename=LOG_FILE,
    level=logging.INFO,
    format="%(asctime)s [%(levelname)s] %(message)s"
)

logging.info("Starting modbus-mqtt with config from disk")

try:
    with open(CONFIG_FILE, "r") as f:
        cfg = yaml.safe_load(f)
except Exception as e:
    logging.error(f"Failed to load config: {e}")
    exit(1)

last_mtime = os.path.getmtime(CONFIG_FILE)

MODBUS_HOST = cfg["modbus"]["host"]
MODBUS_PORT = cfg["modbus"]["port"]
UNIT_ID = cfg["modbus"]["unit_id"]

MQTT_HOST = cfg["mqtt"]["host"]
MQTT_PORT = cfg["mqtt"]["port"]
BASE_TOPIC = cfg["mqtt"]["base_topic"]

POLL_INTERVAL = cfg["poll_interval"]
REGISTERS = cfg["registers"]

mqttc = mqtt.Client(client_id="modbus_mqtt_bridge", clean_session=True)

mqtt_user = cfg["mqtt"].get("username")
mqtt_pass = cfg["mqtt"].get("password")

if mqtt_user and mqtt_pass:
    mqttc.username_pw_set(mqtt_user, mqtt_pass)
elif mqtt_user or mqtt_pass:
    logging.warning("MQTT username or password missing. Authentication disabled.")
else:
    logging.info("No auth data found. Start without authentication")

mqttc.connect(MQTT_HOST, MQTT_PORT)
mqttc.loop_start()

# ---------------------------------------------------------
# Text bereinigen
# ---------------------------------------------------------

def sanitize(text):
    # Umlaute ersetzen
    text = (
        text.replace("ä", "ae")
            .replace("ö", "oe")
            .replace("ü", "ue")
            .replace("Ä", "Ae")
            .replace("Ö", "Oe")
            .replace("Ü", "Ue")
            .replace("ß", "ss")
    )

    # Problematische Zeichen ersetzen
    text = text.replace("-", "_")
    text = text.replace(":", "_")

    # Erlaubt: A-Z, a-z, 0-9, _
    text = re.sub(r"[^A-Za-z0-9_]+", "_", text)

    # Mehrere Unterstriche zu einem machen
    text = re.sub(r"_+", "_", text)

    # Anfang/Ende säubern
    return text.strip("_")

# ---------------------------------------------------------
# CRC16 Modbus
# ---------------------------------------------------------

def crc16(data):
    crc = 0xFFFF
    for pos in data:
        crc ^= pos
        for _ in range(8):
            if crc & 1:
                crc = (crc >> 1) ^ 0xA001
            else:
                crc >>= 1
    return crc.to_bytes(2, byteorder="little")

# ---------------------------------------------------------
# RTU‑Frame senden über TCP
# ---------------------------------------------------------

def read_holding_registers_rtu_tcp(unit, address, count):
    # Build RTU frame: [unit][function][addr_hi][addr_lo][count_hi][count_lo][crc_lo][crc_hi]
    frame = bytearray()
    frame.append(unit)
    frame.append(0x03)  # Function code: Read Holding Registers
    frame += struct.pack(">HH", address, count)
    frame += crc16(frame)

    # TCP socket
    s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    s.settimeout(2)
    s.connect((MODBUS_HOST, MODBUS_PORT))
    s.send(frame)

    # Response
    response = s.recv(256)
    s.close()

    # Validate minimum length
    if len(response) < 5:
        raise Exception("Invalid response length")

    # Validate CRC
    data = response[:-2]
    crc_received = response[-2:]
    crc_calc = crc16(data)
    if crc_received != crc_calc:
        raise Exception("CRC mismatch")

    # Byte count
    byte_count = response[2]
    if byte_count != count * 2:
        raise Exception("Unexpected byte count")

    # Extract registers
    registers = []
    for i in range(count):
        hi = response[3 + i*2]
        lo = response[4 + i*2]
        registers.append((hi << 8) | lo)

    return registers

# ---------------------------------------------------------
# Poll‑Loop
# ---------------------------------------------------------

last_values = {}

while True:
    # Auto‑Reload wenn config.yaml geändert wurde
    current_mtime = os.path.getmtime(CONFIG_FILE)
    if current_mtime != last_mtime:
        logging.info("Config changed, restarting...")
        mqttc.loop_stop()
        exit(0)

    for reg in REGISTERS:
        addr = reg["addr"]
        reg_type = reg["type"]
        factor = reg["factor"]
        length = 2 if reg_type == "uint32" else 1

        try:
            regs = read_holding_registers_rtu_tcp(UNIT_ID, addr, length)

            if reg_type == "int16":
                value = struct.unpack(">h", struct.pack(">H", regs[0]))[0]
            elif reg_type == "uint16":
                value = regs[0]
            elif reg_type == "uint32":
                value = (regs[0] << 16) | regs[1]
            else:
                continue

            value *= factor

            # Nachkommastellen basierend auf config.yaml
            decimals = reg.get("decimals", None)
            if decimals is not None:
                value = round(value, decimals)

            # Beschreibung + Name in Topic einbauen
            name = reg.get("name", "")
            desc = reg.get("description", "")

            name_clean = sanitize(name)
            desc_clean = sanitize(desc)

            # Format: addr:name-description
            topic_suffix = str(addr)

            if name_clean:
                topic_suffix += f"_{name_clean}"

            if desc_clean:
                topic_suffix += f"_{desc_clean}"

            topic = f"{BASE_TOPIC}/register/{topic_suffix}"

            # Nur senden, wenn sich der Wert geändert hat
            if addr in last_values and last_values[addr] == value:
                continue  # Wert unverändert → nicht senden

            last_values[addr] = value
            mqttc.publish(topic, value)
            #logging.info(f"Published {topic} = {value}")

        except Exception as e:
            logging.error(f"Error reading register {addr}: {e}")

        time.sleep(0.2)

    time.sleep(POLL_INTERVAL)

/opt/modbus-mqtt/config.yaml

modbus:
  host: "192.168.88.101"
  port: 8899
  unit_id: 1

mqtt:
  host: "192.168.1.251"
  port: 1883
  base_topic: "modbus/inverter"
  username: "mqtt_user"
  password: "mqtt_passwort"

poll_interval: 13

registers:
  - addr: 1199                      # Total Verbrauch in kW
    name: "ActivePower_Load_Sys"
    type: "uint16"
    factor: 0.01
    decimals: 2
    description: "Total Verbrauch"

  - addr: 1160                      # BKW Netz in kW
    name: "ActivePower_PCC_Total"
    type: "int16"
    factor: 0.01
    decimals: 2
    description: "BKW Netz"

  - addr: 1476                      # PV Produktion in kW
    name: "Power_PV_Total"
    type: "uint16"
    factor: 0.1
    decimals: 2
    description: "PV Produktion"

  - addr: 1542                      # Akku Leistung in kW
    name: "Power_Bat1"
    type: "int16"
    factor: 0.01
    decimals: 2
    description: "Akku Leistung"

  - addr: 1544                      # Akku Ladung in %
    name: "SOC_Bat1"
    type: "uint16"
    factor: 1
    decimals: 0
    description: "Akku Ladung"

  - addr: 1668                      # PV Produktion heute in kWh
    name: "PV_Generation_Today"
    type: "uint32"
    factor: 0.01
    decimals: 2
    description: "PV Produktion heute"

Beim Waveshare musste ich auf "Transparent" (anstelle von "modbus TCP <=> modbus RTU") stellen.
In der config seht ihr auch, dass LXCs und der Waveshare nicht im gleichen Netzwerk sind. WAN von 192.168.88.0 (MikroTik Router) hängt am Netz 192.168.1.0 (Fritzbox). Da hab ich eine Route definiert, damit man vom einen ins andere Netz zugreifen kann.
Die IPs, Ports, Usernames und Passwörter müsst ihr natürlich auf eure Gegebenheiten anpassen.

In der /etc/systemd/system/modbus-mqtt.service

[Unit]
Description=Modbus RTU over TCP to MQTT Gateway
After=network-online.target
Wants=network-online.target

[Service]
Type=simple
User=root
WorkingDirectory=/opt/modbus-mqtt
ExecStart=/usr/bin/env python3 /opt/modbus-mqtt/modbus_tcp_rtu.py
Restart=always
RestartSec=5
Environment=PYTHONUNBUFFERED=1

[Install]
WantedBy=multi-user.target

Wenn alles fertig ist, eingeben:

sudo systemctl daemon-reload
sudo systemctl enable modbus-mqtt.service
sudo systemctl start modbus-mqtt.service

Die Daten werden nun per MQTT an den ioBroker gesendet.
Der Datenpunkt sieht dann etwa so aus:

mqtt.0.modbus.inverter.register.{Registeradresse}