Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie'
-
Lösch den zweiten Block raus.
diesen Befehl habe ich bei der Installation eine anderen Software benutzt
Hat sich aber nicht ausgewirkt, der banjamin ist nicht in der Gruppe adm drin. Mal sauber neugestartet? Gruppenänderungen werden nur beim einloggen gelesen.
-
hab den Eintrag gelöscht und neugestartet. Ein Problem ist schon mal behoben
iob diagScript v.2025-03-08 *** BASE SYSTEM *** Static hostname: smarthome Icon name: computer-desktop Chassis: desktop 🖥️ Operating System: Debian GNU/Linux 13 (trixie) Kernel: Linux 6.12.38+deb13-amd64 Architecture: x86-64 Hardware Vendor: FUJITSU Hardware Model: D2990-A1 Firmware Version: V4.6.4.0 R1.10.0 for D2990-A1x Firmware Date: Mon 2012-04-02 Firmware Age: 13y 4month 1w 1d OS is similar to: model name : Intel(R) Core(TM) i5-2300 CPU @ 2.80GHz Docker : false Virtualization : none Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 14:27:32 up 4 min, 2 users, load average: 3.83, 2.07, 0.85 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** TIME AND TIMEZONES *** Local time: Sun 2025-08-10 14:27:32 CEST Universal time: Sun 2025-08-10 12:27:32 UTC RTC time: Sun 2025-08-10 12:27:32 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': benjamin HOME=/home/benjamin GROUPS=benjamin cdrom floppy sudo audio dip video plugdev users netdev iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/benjamin GROUPS=iobroker tty dialout audio video plugdev *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 16G 4.4G 11G 9.5M 1.3G 12G Swap: 1.0G 0B 1.0G Total: 17G 4.4G 12G Active iob-Instances: 42 15716 M total memory 4213 M used memory 4056 M active memory 738 M inactive memory 10560 M free memory 165 M buffer memory 1066 M swap cache 974 M total swap 0 M used swap 974 M free swap *** top - Table Of Processes *** top - 14:27:32 up 4 min, 2 users, load average: 3.83, 2.07, 0.85 Tasks: 218 total, 5 running, 212 sleeping, 0 stopped, 1 zombie %Cpu(s): 66.7 us, 2.4 sy, 0.0 ni, 31.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 15716.2 total, 10635.5 free, 4137.8 used, 1232.8 buff/cache MiB Swap: 975.0 total, 975.0 free, 0.0 used. 11578.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 7.7G 0 7.7G 0% /dev tmpfs tmpfs 1.6G 4.0M 1.6G 1% /run /dev/sdd1 ext4 457G 24G 410G 6% / tmpfs tmpfs 7.7G 0 7.7G 0% /dev/shm tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 7.7G 52K 7.7G 1% /tmp /dev/sda1 ext4 1.8T 304G 1.5T 18% /hdd1 /dev/sdb1 ext4 915G 738G 131G 85% /hdd2 tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 1.6G 8.0K 1.6G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Aug 10 14:23:23 2025] EXT4-fs (sdd1): mounted filesystem ae464377-b085-49ec-b984-029b67ef6597 ro with ordered data mode. Quota mode: none. [Sun Aug 10 14:23:24 2025] EXT4-fs (sdd1): re-mounted ae464377-b085-49ec-b984-029b67ef6597 r/w. [Sun Aug 10 14:23:25 2025] EXT4-fs (sda1): mounted filesystem 460e619b-f9db-4a4e-b3b7-36f59fb17cb0 r/w with ordered data mode. Quota mode: none. [Sun Aug 10 14:23:25 2025] EXT4-fs (sdb1): mounted filesystem 22adabf5-6736-41de-8a6d-4e40f90fc2c3 r/w with ordered data mode. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sdd1 ext4 rw,relatime,errors=remount-ro |-/hdd1 /dev/sda1 ext4 rw,relatime `-/hdd2 /dev/sdb1 ext4 rw,relatime Files in neuralgic directories: /var: 3.6G /var/ 2.0G /var/www 1.8G /var/www/nextcloud 1.5G /var/www/nextcloud/apps 855M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 69.3M in the file system. /opt/iobroker/backups: 7.9G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 3.9G /opt/iobroker/iobroker-data/ 2.9G /opt/iobroker/iobroker-data/history 727M /opt/iobroker/iobroker-data/files 156M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/echarts.admin The five largest files in iobroker-data are: 89M /opt/iobroker/iobroker-data/states.jsonl 55M /opt/iobroker/iobroker-data/objects.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2400785-if00 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.4 /usr/bin/node v20.19.4 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.32.0 nodejs: Installed: 20.19.4-1nodesource1 Candidate: 20.19.4-1nodesource1 Version table: *** 20.19.4-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 20.19.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main amd64 Packages 20.19.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: smarthome smarthome (version: 7.0.6, hostname: smarthome , alive, uptime: 244) Core adapters versions js-controller: 7.0.6 admin: 7.6.17 javascript: 8.9.2 nodejs modules from github: 6 +-- homebridge-tapo@1.5.2 (git+ssh://git@github.com/apatsufas/homebridge-tapo-p100.git#aaddca772e05ea766a60dcdf34b35a521fdab79d) +-- iobroker.info@2.0.0 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.info.git#863fada0c02d8c0f718022943bb783f40514f059) +-- iobroker.komoot@0.4.0 (git+ssh://git@github.com/basti4557/ioBroker.komoot.git#278f41712220024f1ace4d3c19bf0b6bbf166bf1) +-- iobroker.nctalk@0.3.0 (git+ssh://git@github.com/jjqoie/ioBroker.nctalk.git#fec263972526a580c6b1e24f7b1455c44600a196) +-- iobroker.sourceanalytix@0.4.15-alpha.1 (git+ssh://git@github.com/DrozmotiX/ioBroker.sourceanalytix.git#1010e11d126dc2e9639b70f17b79d082dead83ba) +-- iobroker.tapo@0.4.8 (git+ssh://git@github.com/TA2k/ioBroker.tapo.git#615315d4bae5c77b153ac5067bdca8ba3ad3996f) Adapter State + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 192.168.178.12, run as: benjamin system.adapter.alexa-timer-vis.0 : alexa-timer-vis : smarthome - disabled + system.adapter.alexa2.0 : alexa2 : smarthome - enabled system.adapter.alias-manager.0 : alias-manager : smarthome - disabled + system.adapter.awtrix-light.0 : awtrix-light : smarthome - enabled + system.adapter.awtrix-light.1 : awtrix-light : smarthome - enabled + system.adapter.backitup.0 : backitup : smarthome - enabled system.adapter.birthdays.0 : birthdays : smarthome - enabled system.adapter.calendar.0 : calendar : smarthome - disabled, port: 8095 system.adapter.cameras.0 : cameras : smarthome - enabled, port: 8203, bind: 127.0.0.1 + system.adapter.cloud.0 : cloud : smarthome - enabled system.adapter.contact.0 : contact : smarthome - disabled, port: 8096 system.adapter.daswetter.0 : daswetter : smarthome - enabled + system.adapter.device-reminder.0 : device-reminder : smarthome - enabled + system.adapter.device-watcher.0 : device-watcher : smarthome - enabled system.adapter.devices.0 : devices : smarthome - disabled + system.adapter.discovery.0 : discovery : smarthome - enabled system.adapter.doorbird.0 : doorbird : smarthome - disabled + system.adapter.echarts.0 : echarts : smarthome - enabled system.adapter.email.0 : email : smarthome - disabled system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: smarthome - disabled system.adapter.energiefluss.0 : energiefluss : smarthome - disabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : smarthome - enabled system.adapter.feiertage.0 : feiertage : smarthome - enabled system.adapter.flexcharts.0 : flexcharts : smarthome - enabled + system.adapter.fritzbox.0 : fritzbox : smarthome - enabled system.adapter.fullcalendar.0 : fullcalendar : smarthome - enabled + system.adapter.history.0 : history : smarthome - enabled + system.adapter.homeconnect.0 : homeconnect : smarthome - enabled system.adapter.ical.0 : ical : smarthome - enabled system.adapter.ical.1 : ical : smarthome - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : smarthome - disabled + system.adapter.influxdb.0 : influxdb : smarthome - enabled, port: 8086 + system.adapter.info.0 : info : smarthome - enabled + system.adapter.iot.0 : iot : smarthome - enabled system.adapter.iot.1 : iot : smarthome - disabled system.adapter.iqontrol.0 : iqontrol : smarthome - disabled system.adapter.jarvis.0 : jarvis : smarthome - disabled + system.adapter.javascript.0 : javascript : smarthome - enabled system.adapter.javascript.1 : javascript : smarthome - disabled system.adapter.komoot.0 : komoot : smarthome - disabled system.adapter.life360.0 : life360 : smarthome - disabled system.adapter.linux-control.0 : linux-control : smarthome - disabled system.adapter.matter.0 : matter : smarthome - enabled system.adapter.mobile.0 : mobile : smarthome - disabled system.adapter.modbus.0 : modbus : smarthome - disabled + system.adapter.modbus.1 : modbus : smarthome - enabled system.adapter.modbus.2 : modbus : smarthome - disabled + system.adapter.mqtt-client.0 : mqtt-client : smarthome - enabled, port: 1884 + system.adapter.mqtt.0 : mqtt : smarthome - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : smarthome - enabled, port: 8883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : smarthome - enabled, port: 8883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : smarthome - enabled, port: 1883, bind: 0.0.0.0 system.adapter.nctalk.0 : nctalk : smarthome - disabled, port: 443 system.adapter.nctalk.1 : nctalk : smarthome - disabled, port: 443 + system.adapter.netatmo-crawler.0 : netatmo-crawler : smarthome - enabled system.adapter.nina.0 : nina : smarthome - enabled + system.adapter.node-red.0 : node-red : smarthome - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.notification-manager.0 : notification-manager : smarthome - enabled + system.adapter.opendtu.0 : opendtu : smarthome - enabled system.adapter.openweathermap.0 : openweathermap : smarthome - enabled system.adapter.owntracks.0 : owntracks : smarthome - disabled, port: 2886, bind: 0.0.0.0 system.adapter.pi-hole.0 : pi-hole : smarthome - disabled + system.adapter.ping.0 : ping : smarthome - enabled system.adapter.scenes.0 : scenes : smarthome - disabled + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 192.168.178.12 + system.adapter.shelly.1 : shelly : smarthome - enabled, port: 1889, bind: 192.168.178.12 system.adapter.simple-api.0 : simple-api : smarthome - enabled, port: 8087, bind: 192.168.178.12, run as: admin system.adapter.socketio.0 : socketio : smarthome - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.solarwetter.0 : solarwetter : smarthome - enabled + system.adapter.sonoff.0 : sonoff : smarthome - enabled, port: 1883, bind: 0.0.0.0 system.adapter.sourceanalytix.1 : sourceanalytix : smarthome - enabled + system.adapter.spotify-premium.0 : spotify-premium : smarthome - enabled system.adapter.statistics.0 : statistics : smarthome - enabled system.adapter.tankerkoenig.0 : tankerkoenig : smarthome - enabled system.adapter.tapo.0 : tapo : smarthome - enabled system.adapter.telegram-menu.0 : telegram-menu : smarthome - disabled + system.adapter.telegram.0 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : smarthome - enabled + system.adapter.tibberlink.0 : tibberlink : smarthome - enabled system.adapter.time-switch.0 : time-switch : smarthome - disabled + system.adapter.tr-064.0 : tr-064 : smarthome - enabled + system.adapter.tr-064.1 : tr-064 : smarthome - enabled system.adapter.traccar.0 : traccar : smarthome - disabled system.adapter.trashschedule.0 : trashschedule : smarthome - enabled + system.adapter.tuya.0 : tuya : smarthome - enabled system.adapter.tuya.1 : tuya : smarthome - disabled system.adapter.tvprogram.0 : tvprogram : smarthome - disabled system.adapter.tvspielfilm.0 : tvspielfilm : smarthome - disabled system.adapter.upnp.0 : upnp : smarthome - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : smarthome - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : smarthome - disabled system.adapter.vis-icontwo.0 : vis-icontwo : smarthome - disabled system.adapter.vis-inventwo.0 : vis-inventwo : smarthome - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : smarthome - disabled system.adapter.vis-map.0 : vis-map : smarthome - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : smarthome - disabled system.adapter.vis-metro.0 : vis-metro : smarthome - disabled system.adapter.vis-players.0 : vis-players : smarthome - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : smarthome - disabled system.adapter.vis.0 : vis : smarthome - enabled system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.windows-control.0 : windows-control : smarthome - enabled system.adapter.wled.0 : wled : smarthome - disabled + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 192.168.178.12, run as: benjamin system.adapter.cameras.0 : cameras : smarthome - enabled, port: 8203, bind: 127.0.0.1 + system.adapter.influxdb.0 : influxdb : smarthome - enabled, port: 8086 + system.adapter.mqtt-client.0 : mqtt-client : smarthome - enabled, port: 1884 + system.adapter.mqtt.0 : mqtt : smarthome - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.mqtt.1 : mqtt : smarthome - enabled, port: 8883, bind: 0.0.0.0 + system.adapter.mqtt.2 : mqtt : smarthome - enabled, port: 8883, bind: 0.0.0.0 + system.adapter.mqtt.3 : mqtt : smarthome - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : smarthome - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 192.168.178.12 + system.adapter.shelly.1 : shelly : smarthome - enabled, port: 1889, bind: 192.168.178.12 system.adapter.simple-api.0 : simple-api : smarthome - enabled, port: 8087, bind: 192.168.178.12, run as: admin system.adapter.socketio.0 : socketio : smarthome - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : smarthome - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/ttyACM0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.17 , installed 7.6.17 Adapter "alexa-timer-vis": 2.1.1 , installed 2.1.1 Adapter "alexa2" : 3.27.3 , installed 3.27.3 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "awtrix-light" : 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "birthdays" : 4.0.0 , installed 4.0.0 Adapter "cameras" : 2.1.2 , installed 2.1.2 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daswetter" : 3.2.3 , installed 3.2.3 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "device-watcher": 2.12.1 , installed 2.12.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "doorbird" : 3.0.0 , installed 3.0.0 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "energiefluss" : 3.6.2 , installed 3.6.2 Adapter "energiefluss-erweitert": 0.7.7, installed 0.7.7 Adapter "fb-checkpresence": 1.4.0 , installed 1.4.0 Adapter "feiertage" : 1.2.1 , installed 1.2.1 Adapter "flexcharts" : 0.4.1 , installed 0.4.1 Adapter "fritzbox" : 0.6.0 , installed 0.6.0 Adapter "fullcalendar" : 2.4.5 , installed 2.4.5 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "ical" : 1.16.2 , installed 1.16.2 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "iqontrol" : 3.0.0 , installed 3.0.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "matter" : 0.5.1 , installed 0.5.1 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "mqtt-client" : 3.0.0 , installed 3.0.0 Adapter "netatmo-crawler": 1.0.0 , installed 1.0.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "notification-manager": 1.2.1, installed 1.2.1 Adapter "opendtu" : 3.1.0 , installed 3.1.0 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "owntracks" : 1.1.0 , installed 1.1.0 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shelly" : 10.1.0 , installed 10.1.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "solarwetter" : 1.2.0 , installed 1.2.0 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "spotify-premium": 1.5.2 , installed 1.5.2 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "telegram-menu": 2.4.4 , installed 2.4.4 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tibberlink" : 5.0.0 , installed 5.0.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "traccar" : 1.1.6 , installed 1.1.6 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "tvprogram" : 4.0.0 , installed 4.0.0 Adapter "tvspielfilm" : 2.1.0 , installed 2.1.0 Adapter "upnp" : 1.1.0 , installed 1.1.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.12.0 , installed 1.12.0 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-map" : 1.1.2 , installed 1.1.2 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "windows-control": 0.1.5 , installed 0.1.5 Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 2.0.5 , installed 2.0.5 Objects and States Please stand by - This may take a while Objects: 38662 States: 33083 *** OS-Repositories and Updates *** W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Hit:1 http://security.debian.org/debian-security trixie-security InRelease Hit:2 http://deb.debian.org/debian trixie InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 https://repos.influxdata.com/debian stable InRelease Hit:5 https://packages.sury.org/php trixie InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:7 https://download.webmin.com/download/newkey/repository stable InRelease Reading package lists... W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.12:1882 0.0.0.0:* LISTEN 1001 13598 2062/io.shelly.0 tcp 0 0 192.168.178.12:1889 0.0.0.0:* LISTEN 1001 13009 2229/io.shelly.1 tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 7965 1370/smbd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7523 1108/sshd: /usr/sbi tcp 0 0 0.0.0.0:8200 0.0.0.0:* LISTEN 105 8626 737/minidlnad tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 428 1/init tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 7966 1370/smbd tcp 0 0 127.0.0.1:4101 0.0.0.0:* LISTEN 0 9469 700/brltty tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN 0 10379 1442/perl tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 11090 1725/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 13619 2083/io.sonoff.0 tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 11602 1924/io.mqtt.0 tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 11601 1924/io.mqtt.0 tcp 0 0 127.0.0.1:11211 0.0.0.0:* LISTEN 107 8354 735/memcached tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 104 9708 1106/mariadbd tcp 0 0 127.0.0.1:3551 0.0.0.0:* LISTEN 0 6865 786/apcupsd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 10033 1430/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 11287 1430/iobroker.js-co tcp 0 0 192.168.178.12:8081 0.0.0.0:* LISTEN 1001 11309 1564/io.admin.0 tcp 0 0 192.168.178.12:8087 0.0.0.0:* LISTEN 1001 20880 3367/io.simple-api. tcp 0 0 127.0.0.1:8203 0.0.0.0:* LISTEN 1001 27159 4094/io.cameras.0 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 9509 1129/exim4 tcp6 0 0 ::1:11211 :::* LISTEN 107 8355 735/memcached tcp6 0 0 :::443 :::* LISTEN 0 7544 1151/apache2 tcp6 0 0 :::445 :::* LISTEN 0 7963 1370/smbd tcp6 0 0 :::22 :::* LISTEN 0 7525 1108/sshd: /usr/sbi tcp6 0 0 :::111 :::* LISTEN 0 3648 1/init tcp6 0 0 :::80 :::* LISTEN 0 7540 1151/apache2 tcp6 0 0 :::139 :::* LISTEN 0 7964 1370/smbd tcp6 0 0 ::1:25 :::* LISTEN 0 9510 1129/exim4 tcp6 0 0 :::10000 :::* LISTEN 0 10380 1442/perl tcp6 0 0 :::8082 :::* LISTEN 1001 24810 3712/io.web.0 tcp6 0 0 :::8084 :::* LISTEN 1001 20895 3407/io.socketio.0 tcp6 0 0 :::8086 :::* LISTEN 999 8698 776/influxd tcp6 0 0 ::1:4101 :::* LISTEN 0 7036 700/brltty udp 0 0 192.168.178.12:44707 0.0.0.0:* 105 8629 737/minidlnad udp 0 0 0.0.0.0:45568 0.0.0.0:* 1001 23645 3607/io.upnp.0 udp 0 0 192.168.178.12:5353 0.0.0.0:* 1001 14002 2211/io.tr-064.1 udp 0 0 192.168.178.12:5353 0.0.0.0:* 1001 12807 2145/io.tr-064.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 12870 2169/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 12871 2169/io.tuya.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 1885 637/dhclient udp 0 0 0.0.0.0:111 0.0.0.0:* 0 429 1/init udp 0 0 192.168.178.255:137 0.0.0.0:* 0 9644 1261/nmbd udp 0 0 192.168.178.12:137 0.0.0.0:* 0 9643 1261/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 9592 1261/nmbd udp 0 0 192.168.178.255:138 0.0.0.0:* 0 9646 1261/nmbd udp 0 0 192.168.178.12:138 0.0.0.0:* 0 9645 1261/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 9593 1261/nmbd udp 0 0 0.0.0.0:10000 0.0.0.0:* 0 10381 1442/perl udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 24050 3607/io.upnp.0 udp 0 0 239.255.255.250:1900 0.0.0.0:* 105 8625 737/minidlnad udp6 0 0 :::111 :::* 0 4306 1/init *** Log File - Last 25 Lines *** 2025-08-10 14:27:32.656 - info: host.smarthome instance system.adapter.windows-control.0 in version "0.1.5" started with pid 3850 2025-08-10 14:27:34.102 - info: windows-control.0 (3850) starting. Version 0.1.5 in /opt/iobroker/node_modules/iobroker.windows-control, node: v20.19.4, js-controller: 7.0.6 2025-08-10 14:27:34.126 - info: windows-control.0 (3850) 1 device(s) and 1 user command(s) configured. 2025-08-10 14:27:36.698 - info: host.smarthome instance system.adapter.tapo.0 in version "0.4.8" (non-npm: TA2k/ioBroker.tapo#615315d4bae5c77b153ac5067bdca8ba3ad3996f) started with pid 3983 2025-08-10 14:27:38.161 - info: tuya.0 (2169) 817027002462ab43f9cd: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.94:6668 2025-08-10 14:27:38.237 - info: tapo.0 (3983) starting. Version 0.4.8 (non-npm: TA2k/ioBroker.tapo#615315d4bae5c77b153ac5067bdca8ba3ad3996f) in /opt/iobroker/node_modules/iobroker.tapo, node: v20.19.4, js-controller: 7.0.6 2025-08-10 14:27:38.267 - info: tapo.0 (3983) Login tp TAPO App 2025-08-10 14:27:38.624 - info: tapo.0 (3983) Login succesfull 2025-08-10 14:27:38.846 - info: tapo.0 (3983) Found 1 devices 2025-08-10 14:27:39.074 - info: tapo.0 (3983) Init device 8021539C0D3244BA58E2657868FCEAEE2392A940 type TC60 5.0 with ip 192.168.178.63 2025-08-10 14:27:39.231 - info: tapo.0 (3983) 8021539C0D3244BA58E2657868FCEAEE2392A940 Received device info {"manufacturer":"tp-link","model":"Tapo TC60","firmwareVersion":"1.2.4 Build 250418 Rel.63398n","serialNumber":"746183f1","hardwareId":5} 2025-08-10 14:27:39.243 - info: tapo.0 (3983) Initialized 8021539C0D3244BA58E2657868FCEAEE2392A940 2025-08-10 14:27:39.270 - info: tapo.0 (3983) Wait for connections for non camera devices 2025-08-10 14:27:40.724 - info: host.smarthome instance system.adapter.cameras.0 in version "2.1.2" started with pid 4094 2025-08-10 14:27:42.235 - info: cameras.0 (4094) starting. Version 2.1.2 in /opt/iobroker/node_modules/iobroker.cameras, node: v20.19.4, js-controller: 7.0.6 2025-08-10 14:27:44.609 - info: host.smarthome instance system.adapter.matter.0 in version "0.5.1" started with pid 4139 2025-08-10 14:27:44.797 - info: cameras.0 (4094) Server started on 127.0.0.1:8203 2025-08-10 14:27:49.232 - info: matter.0 (4139) starting. Version 0.5.1 in /opt/iobroker/node_modules/iobroker.matter, node: v20.19.4, js-controller: 7.0.6 2025-08-10 14:27:49.271 - info: tapo.0 (3983) Start first Update 2025-08-10 14:27:50.156 - info: tuya.0 (2169) bf71e05b81378d07fa4rr6: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.129:6668 2025-08-10 14:27:50.220 - info: tuya.0 (2169) bf479069f6c2e9dc05c9rw: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.113:6668 2025-08-10 14:28:03.276 - info: tuya.0 (2169) bfc58db9905282a732flco: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.137:6668 2025-08-10 14:28:03.505 - info: tuya.0 (2169) 707703542cf432a0bd9d: Error on Reconnect (7): connect ECONNREFUSED 192.168.178.120:6668 2025-08-10 14:28:04.940 - info: tuya.0 (2169) bf92e63d0ad13f956297jw: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.81:6668 2025-08-10 14:28:07.564 - info: tuya.0 (2169) bf454d38419e2166c9ig4k: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.80:6668sollte der user mit in die Gruppe admin ??
Und Vorsicht meine nextcloud läuft nach dem update nicht mehr
Die php version hat ein update auf 8.4 bekommen -
@benbensimpson2204 sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
sollte der user mit in die Gruppe admin ??
Die Gruppe heißt
admund wenn der benjamin da in Admin-ähnlicher Funktion unterwegs ist, dann würde ich den auch da reinpacken. Spart dir ggfls. ein paar Kommandos, für die du sonst volle root-Rechte bräuchtest.Den Geräte-Link beim Zigbee würde ich auf
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2400785-if00
setzen.iobroker.info würde ich deinstallieren, der wird nicht mehr gepflegt und wirft falsche Infos raus.
Und Vorsicht meine nextcloud läuft nach dem update nicht mehr
Das ist aber die Baustelle von nextcloud.
-
das wäre dann der Befehl zum hinzufügen ??
sudo usermod -aG adm benjaminbei zigbee sieht eb bei mir so aus
-
Ja, Zigbee ist genauso falsch/unglücklich eingestellt wie die erweiterte PanID.
Ist aber was für einen anderen Thread.das wäre dann der Befehl zum hinzufügen ??
sudo usermod -aG adm benjamin -
Hi,
hat hier zufällig noch jemand ein Problem mit dem "Linux-Control" Adapter nach update vom IOB Host auf Trixie?
Linux Control sagt mir alle Devices wären offline obwohl ich diese vom IOB aus erreichen kann.
EDIT: es hat sich etwas mit den User rechten zum Ausführen von "ping" geändert. Nach dieser Anpassung geht es bei mir wieder:
In Debian Trixie, the ping command, provided by the iputils-ping package, no longer executes with elevated privileges by default. Instead, it uses ICMP_PROTO datagram sockets, with access controlled by the net.ipv4.ping_group_range sysctl. This change affects how users can utilize ping, particularly for network troubleshooting. Key Changes and Implications: No more CAP_NET_RAW: The ping command no longer requires the CAP_NET_RAW capability, which is typically associated with elevated privileges. ICMP_PROTO sockets: ping now utilizes ICMP_PROTO datagram sockets for communication. Sysctl control: The net.ipv4.ping_group_range sysctl determines which user groups have permission to use ping. Potential Upgrade Issues: In some upgrade scenarios from previous Debian versions, the linux-sysctl-defaults package might not be installed, potentially affecting ping usage by unprivileged users. Checking and Adjusting the Sysctl: It's recommended to verify the net.ipv4.ping_group_range value and ensure it's set appropriately to allow the desired user group to use ping. How to verify and potentially adjust the net.ipv4.ping_group_range setting: Check the current value: Code sysctl net.ipv4.ping_group_range If the value is restrictive, adjust it: Code sudo sysctl -w net.ipv4.ping_group_range="1 1000" # Example: Allow groups 1-1000 Make the change permanent: Add the following line to /etc/sysctl.conf (or a file in /etc/sysctl.d/): Code net.ipv4.ping_group_range=1 1000 And then apply the changes with: Code sudo sysctl -p In summary, the change in ping's execution in Debian Trixie requires attention to the net.ipv4.ping_group_range sysctl to ensure proper functionality for users needing to use ping for network diagnostics, particularly in scenarios where the linux-sysctl-defaults package is not installed.EDIT2: muss man wohl tiefer einsteigen. Obwohl ich eine sysctl.conf Datei unter /etc mit dem Eintrag angelegt habe funktioniert es nach einem reboot nicht.
Erst nach ausführen von
sudo sysctl -pund anschließendem Neustart der Instanz funktioniert es wieder.
-
Guten morgen @thomas-braun vielen Dank hat sehr gut geklappt.
Herzliche Grüße
Fabio -
@trixie-tester said in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Hallo, habe das Update nach dieser Anleitung erfolgreich durchlaufen lassen.
Trixie ist drauf und lief. Nachdem ich diese Befehle zum Aufräumen per SSH gesendet habe:apt list '~o'
sudo apt purge '~o'
sudo apt --purge autoremove
sudo apt autocleanist leider die Verbindung zu meinem Raspi 4 abgebrochen und er erhält keine LAN Verbindungs IP mehr? Wlan hatte ich zuvor mal über rfkill deaktiviert. Habt Ihr einen Tipp für mich, wie ich die LAN Verbindung wieder an bekomme.
Vielen Dank.Hallo, da ich bisher nicht weitergekommen bin und keiner hier bisher einen Tipp für mich hatte, habe ich weiter nachgeforscht und festgestellt, wenn ich den Raspi über HDMI anschliesse, das er bootet und "Firmware not found" anzeigt nach dem Trixie Update. Eine SD Karte ist nicht installiert, sondern eine SSD in einem Argon-Forty Gehäuse. Vor dem Update lief es einwandfrei und jetzt bekommt er keine LAN Verbindung mehr, somit ist auch kein SSH Zugriff möglich.
Ist das zu reparieren? -
@trixie-tester sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Eine SD Karte ist nicht installiert, sondern eine SSD in einem Argon-Forty Gehäuse.
Das hab ich auch, das ist kein Grund.
Was allerdings ein Grund sein könnte: Die Kiste wurde schon mal von Raspberry 11 auf 12 gehoben. An der Stelle wurde nämlich etwas geändert und die Firmware liegt nicht mehr dort.Installier es neu.
-
@thomas-braun sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
@trixie-tester sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Eine SD Karte ist nicht installiert, sondern eine SSD in einem Argon-Forty Gehäuse.
Das hab ich auch, das ist kein Grund.
Was allerdings ein Grund sein könnte: Die Kiste wurde schon mal von Raspberry 11 auf 12 gehoben. An der Stelle wurde nämlich etwas geändert und die Firmware liegt nicht mehr dort.Installier es neu.
Okay , die Vermutung der vorherigen Anhebung der Installation von 11 auf 12 ist glaube ich richtig, hatte jetzt testweise nach dem Crash eine Neuinstallation gemacht und es lief wieder.
Habe das mit dem Backitup Adapter aus dem Backup wieder hergestellt. Probleme machen mir jedoch die Wiederherstellung meiner Influx.db und von Grafana. Die Wiederherstellung der beiden mit dem Backitup Adapter funktioniert nicht (habe das vorher noch nie gemacht), daher die Frage wegen der Reparatur des Vorsystems? -
@thomas-braun said in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Upgrades sind nur von der direkten Vorversion und nur von der gleichen CPU-Architektur aus möglich.
Also Debian 12 'Bookworm' und z.B. arch64. CrossUpgrades von 32Bit 'armhf' auf 'arm64' sind nicht möglich (nur für echte Pinguine!) und bedingen eine Neuinstallation.Hallo, den oben stehenden Satz verstehe ich nicht ganz. Ist ein Trixie Upgrade mit einem 32bit Bookworm auf einem Rasp. Pi4 möglich?
*** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi4-iobroker Icon name: computer Kernel: Linux 6.12.34+rpt-rpi-v7l Architecture: arm OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : armv7l Userland : 32 bit -
@supernils sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Ist ein Trixie Upgrade mit einem 32bit Bookworm auf einem Rasp. Pi4 möglich?
Installier auf einem Pi4 ein 64Bit-System NEU.
Da ist nix mit 'upgraden' oder '32Bit reichen mir'. Die 32Bit-Plattform stirbt. -
Update auf Debian Trixie single Host erfolgreich, danke für die genaue Beschreibung.
-
@thomas-braun
Vielen Dank für tolle Beschreibung.
Ich habe jetzt mein System aktualisiert.
iob diag sieht so aus:========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: DebianIO Icon name: computer-container Chassis: container ☐ Virtualization: lxc Kernel: Linux 6.14.8-2-pve Architecture: x86-64 OS is similar to: model name : Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 16:40:11 up 10 min, 0 users, load average: 0.87, 0.91, 1.05 CPU threads: 2 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** TIME AND TIMEZONES *** Local time: Fri 2025-08-15 16:40:12 CEST Universal time: Fri 2025-08-15 14:40:12 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': edi77 HOME=/home/edi77 GROUPS=edi77 sudo users iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/edi77 GROUPS=iobroker tty dialout audio video plugdev *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 8.6G 2.1G 5.5G 118K 907M 6.5G Swap: 1.1G 0B 1.1G Total: 9.7G 2.1G 6.6G Active iob-Instances: 33 8192 M total memory 2035 M used memory 2089 M active memory 640 M inactive memory 5290 M free memory 0 M buffer memory 865 M swap cache 1024 M total swap 0 M used swap 1024 M free swap *** top - Table Of Processes *** top - 16:40:12 up 10 min, 0 users, load average: 0.87, 0.91, 1.05 Tasks: 58 total, 1 running, 57 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8192.0 total, 5289.1 free, 2037.2 used, 865.6 buff/cache MiB Swap: 1024.0 total, 1024.0 free, 0.0 used. 6154.8 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System * sys-kernel-config.mount loaded failed failed Kernel Configuration File System Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/pve-vm--104--disk--0 ext4 40G 19G 19G 51% / none tmpfs 492K 4.0K 488K 1% /dev udev devtmpfs 7.6G 0 7.6G 0% /dev/tty tmpfs tmpfs 7.7G 0 7.7G 0% /dev/shm tmpfs tmpfs 3.1G 112K 3.1G 1% /run tmpfs tmpfs 7.7G 0 7.7G 0% /tmp tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mapper/pve-vm--104--disk--0 ext4 rw,relatime,stripe=16 Files in neuralgic directories: /var: 950M /var/ 495M /var/log 494M /var/log/journal/07999bdde13e4bb78b0c943aad8ee95b 494M /var/log/journal 292M /var/cache Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 97.1M in the file system. /opt/iobroker/backups: 3.8G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 6.9G /opt/iobroker/iobroker-data/ 5.9G /opt/iobroker/iobroker-data/history 860M /opt/iobroker/iobroker-data/files 228M /opt/iobroker/iobroker-data/files/vis-2 129M /opt/iobroker/iobroker-data/files/vis The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 31M /opt/iobroker/iobroker-data/objects.jsonl 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.4 /usr/bin/node v20.19.4 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.32.0 nodejs: Installed: 20.19.4-1nodesource1 Candidate: 20.19.4-1nodesource1 Version table: *** 20.19.4-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 20.19.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main amd64 Packages 20.19.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: DebianIO DebianIO (version: 7.0.6, hostname: DebianIO , alive, uptime: 620) Core adapters versions js-controller: 7.0.6 admin: 7.6.17 javascript: 8.9.2 nodejs modules from github: 1 +-- iobroker.zigbee@3.0.1 (git+ssh://git@github.com/ioBroker/ioBroker.zigbee.git#ae472aefab7fbb3c70b56d3c477662e265e52f03) Adapter State + system.adapter.admin.0 : admin : DebianIO - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : DebianIO - enabled + system.adapter.backitup.1 : backitup : DebianIO - enabled + system.adapter.cloud.0 : cloud : DebianIO - enabled + system.adapter.device-watcher.0 : device-watcher : DebianIO - enabled system.adapter.devices.0 : devices : DebianIO - enabled + system.adapter.deyeidc.0 : deyeidc : DebianIO - enabled, port: 8899 system.adapter.discovery.0 : discovery : DebianIO - disabled + system.adapter.echarts.0 : echarts : DebianIO - enabled + system.adapter.fritzdect.0 : fritzdect : DebianIO - enabled + system.adapter.history.0 : history : DebianIO - enabled + system.adapter.hmip.0 : hmip : DebianIO - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : DebianIO - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : DebianIO - disabled + system.adapter.iot.0 : iot : DebianIO - enabled + system.adapter.javascript.0 : javascript : DebianIO - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : DebianIO - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : DebianIO - enabled, port: 54321 + system.adapter.onvif.0 : onvif : DebianIO - enabled, port: 8000 + system.adapter.ping.0 : ping : DebianIO - enabled + system.adapter.proxmox.0 : proxmox : DebianIO - enabled, port: 8006 + system.adapter.reolink.0 : reolink : DebianIO - enabled system.adapter.scenes.0 : scenes : DebianIO - disabled + system.adapter.shelly.0 : shelly : DebianIO - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : DebianIO - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.snmp.0 : snmp : DebianIO - enabled system.adapter.socketio.0 : socketio : DebianIO - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : DebianIO - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : DebianIO - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : DebianIO - enabled + system.adapter.telegram.0 : telegram : DebianIO - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : DebianIO - disabled + system.adapter.tr-064.0 : tr-064 : DebianIO - enabled + system.adapter.tuya.0 : tuya : DebianIO - enabled system.adapter.vis-2-widgets-collection.0: vis-2-widgets-collection: DebianIO - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : DebianIO - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : DebianIO - enabled system.adapter.vis-2-widgets-inventwo.0 : vis-2-widgets-inventwo: DebianIO - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: DebianIO - enabled + system.adapter.vis-2.0 : vis-2 : DebianIO - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : DebianIO - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : DebianIO - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : DebianIO - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : DebianIO - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : DebianIO - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : DebianIO - disabled system.adapter.vis-metro.0 : vis-metro : DebianIO - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : DebianIO - disabled system.adapter.vis.0 : vis : DebianIO - enabled + system.adapter.web.0 : web : DebianIO - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : DebianIO - enabled, port: 8083, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : DebianIO - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : DebianIO - enabled, port: tcp://192.168.178.12:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : DebianIO - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deyeidc.0 : deyeidc : DebianIO - enabled, port: 8899 + system.adapter.mihome-vacuum.0 : mihome-vacuum : DebianIO - enabled, port: 54321 + system.adapter.mihome-vacuum.1 : mihome-vacuum : DebianIO - enabled, port: 54321 + system.adapter.onvif.0 : onvif : DebianIO - enabled, port: 8000 + system.adapter.proxmox.0 : proxmox : DebianIO - enabled, port: 8006 + system.adapter.shelly.0 : shelly : DebianIO - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : DebianIO - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : DebianIO - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : DebianIO - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : DebianIO - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : DebianIO - enabled, port: 8083, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : DebianIO - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : DebianIO - enabled, port: tcp://192.168.178.12:6638 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.17 , installed 7.6.17 Adapter "alias-manager": 2.0.0 , installed 2.0.0 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "device-watcher": 2.12.1 , installed 2.12.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "deyeidc" : 0.2.0 , installed 0.2.0 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "fritzdect" : 2.6.2 , installed 2.6.2 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.27.0 , installed 1.27.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "mihome-vacuum": 5.2.0 , installed 5.2.0 Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "proxmox" : 2.4.0 , installed 2.4.0 Adapter "reolink" : 1.2.3 , installed 1.2.3 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shelly" : 10.1.0 , installed 10.1.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "snmp" : 3.2.0 , installed 3.2.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "vis-2-widgets-collection": 1.8.1, installed 1.8.1 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.1.0 Adapter "vis-2-widgets-inventwo": 0.2.2, installed 0.2.2 Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 2.0.5 , installed 3.0.1 Objects and States Please stand by - This may take a while Objects: 10632 States: 9133 *** OS-Repositories and Updates *** W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://security.debian.org trixie-security InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... W: https://deb.nodesource.com/node_20.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 3843699 174/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 3844511 174/iobroker.js-con tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 3844328 323/master tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 3838891 1/init tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 3845540 565/io.sonoff.0 tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 3845693 610/io.shelly.0 tcp6 0 0 :::22 :::* LISTEN 0 3840845 1/init tcp6 0 0 :::111 :::* LISTEN 0 3838893 1/init tcp6 0 0 :::8095 :::* LISTEN 1001 3854689 898/io.onvif.0 tcp6 0 0 :::8087 :::* LISTEN 1001 3848811 736/io.simple-api.0 tcp6 0 0 :::8084 :::* LISTEN 1001 3849058 787/io.ws.0 tcp6 0 0 :::8083 :::* LISTEN 1001 3849216 832/io.web.1 tcp6 0 0 :::8082 :::* LISTEN 1001 3845929 691/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 3844625 336/io.admin.0 tcp6 0 0 ::1:25 :::* LISTEN 0 3844329 323/master udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 3848400 625/io.mihome-vacuu udp 0 0 0.0.0.0:37750 0.0.0.0:* 1001 3845073 550/io.snmp.0 udp 0 0 192.168.178.5:5353 0.0.0.0:* 1001 3845643 595/io.tr-064.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 3845595 580/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 3845596 580/io.tuya.0 udp 0 0 0.0.0.0:7885 0.0.0.0:* 1001 3845381 520/io.mihome-vacuu udp 0 0 0.0.0.0:111 0.0.0.0:* 0 3838892 1/init udp6 0 0 :::111 :::* 0 3838894 1/init *** Log File - Last 25 Lines *** <soap:Envelope > <soap:Header> <wsa:Action>http://schemas.xmlsoap.org/ws/2005/04/discovery/ProbeMatches</wsa:Action> <wsa:MessageID>urn:uuid:e1da5585-4fa1-4a38-91e6-f77b38e0d9bd</wsa:MessageID> <wsa:RelatesTo>urn:uuid:ef96d4fd-5ccf-0624-fd92-b1d24ad84bb4</wsa:RelatesTo> <wsa:To>http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous</wsa:To> <wsd:AppSequence InstanceId="2614047292" MessageNumber="1"/> </soap:Header> <soap:Body> <wsd:ProbeMatches/> </soap:Body> </soap:Envelope> 2025-08-15 16:32:11.175 - error: onvif.0 (898) undefined 2025-08-15 16:32:15.851 - error: onvif.0 (898) Error during discovery: TypeError: Cannot read properties of undefined (reading 'endpointReference'),TypeError: Cannot read properties of undefined (reading 'endpointReference') 2025-08-15 16:32:15.851 - info: onvif.0 (898) Finished onvif discovery 2025-08-15 16:32:15.852 - info: onvif.0 (898) Starting snapshot server 2025-08-15 16:32:32.676 - info: tuya.0 (580) bf8736ec46b647a352ueah: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.174:6668 2025-08-15 16:32:34.721 - info: sonoff.0 (565) Client [Stromzaehler] connected with secret 1755268354720_9744 2025-08-15 16:32:34.881 - info: sonoff.0 (565) Client [Nous-3] connected with secret 1755268354880_1452 2025-08-15 16:32:35.239 - info: sonoff.0 (565) Client [Nous-2] connected with secret 1755268355239_5967 2025-08-15 16:32:35.374 - info: sonoff.0 (565) Client [Nous-1_Gefrierschrank] connected with secret 1755268355373_6833 2025-08-15 16:32:59.748 - info: tuya.0 (580) bf4401a6fe27d67a7e1uuq: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.163:6668 2025-08-15 16:33:01.924 - info: tuya.0 (580) bfb7a39438c5cbac04novg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.161:6668 2025-08-15 16:33:03.012 - info: tuya.0 (580) bf302f3b8d8e768522cdj2: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.167:6668 ============ Mark until here for C&P ============= iob diag has finished.Da wird ein Fehler angezeigt und ich habe keine Ahnung was ich da machen soll.
*** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detecteddanke nochmal für die Hilfe
-
@eduard77 sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Da wird ein Fehler angezeigt und ich habe keine Ahnung was ich da machen soll.
Da darf der user nicht die Kernelringpuffer-Meldungen des Hosts sehen. Ist bei LXCs erstmal halt so.
-
@thomas-braun
Okay alles klar. Danke. -
Die anderen Dinge (adm-Gruppe, graphical target, nodejs usw) kannst du aber angehen.
-
@thomas-braun
das Nodejs update möchte ich noch wegen Echarts Adapter nicht machen.Bei Graphical Target habe ich aus deinem Werkzeugkasten folgendes ausgeführt.
edi77@DebianIO:~$ systemctl get-default multi-user.target edi77@DebianIO:~$ sudo systemctl set-default multi-user.target edi77@DebianIO:~$iob diag liefert jetzt das hier:
*** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: ttyWas soll ich machen?
-
@eduard77 sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':
Was soll ich machen?
Nix! Ist doch alles tacko.
-
@codierknecht
Ich habe jetzt festgestellt dass Ping Adapter bei mir nicht mehr funktioniert.
Deinstallation und neu Installation hat nichts gebracht.
Hat jemand das auch?
Mein Debug Log.ping.0 2025-08-15 20:44:34.149 debug Ping result for 192.168.178.15: false in -ms (Tried 0/1 times) ping.0 2025-08-15 20:44:34.147 debug STDERR: /bin/ping: socktype: SOCK_RAW/bin/ping: socket: Operation not permitted/bin/ping: => missing cap_net_raw+p capability or setuid? ping.0 2025-08-15 20:44:34.144 debug System command: /bin/ping -n -w 2 -c 1 192.168.178.15 ping.0 2025-08-15 20:44:34.144 debug Pinging offline 192.168.178.15 ping.0 2025-08-15 20:44:34.093 debug Ping result for 192.168.178.14: false in -ms (Tried 1/1 times) ping.0 2025-08-15 20:44:34.092 debug STDERR: /bin/ping: socktype: SOCK_RAW/bin/ping: socket: Operation not permitted/bin/ping: => missing cap_net_raw+p capability or setuid? ping.0 2025-08-15 20:44:34.088 debug System command: /bin/ping -n -w 2 -c 1 192.168.178.14 ping.0 2025-08-15 20:44:34.087 debug Ping result for 192.168.178.14: false in -ms (Tried 0/1 times) ping.0 2025-08-15 20:44:34.086 debug STDERR: /bin/ping: socktype: SOCK_RAW/bin/ping: socket: Operation not permitted/bin/ping: => missing cap_net_raw+p capability or setuid? ping.0 2025-08-15 20:44:34.081 debug System command: /bin/ping -n -w 2 -c 1 192.168.178.14 ping.0 2025-08-15 20:44:34.081 debug Pinging offline 192.168.178.14 ping.0 2025-08-15 20:44:34.028 debug Ping result for 192.168.178.24: false in -ms (Tried 1/1 times) ping.0 2025-08-15 20:44:34.027 debug STDERR: /bin/ping: socktype: SOCK_RAW/bin/ping: socket: Operation not permitted/bin/ping: => missing cap_net_raw+p capability or setuid? ping.0 2025-08-15 20:44:34.024 debug System command: /bin/ping -n -w 2 -c 1 192.168.178.24 ping.0 2025-08-15 20:44:34.023 debug Ping result for 192.168.178.24: false in -ms (Tried 0/1 times) ping.0 2025-08-15 20:44:34.021 debug STDERR: /bin/ping: socktype: SOCK_RAW/bin/ping: socket: Operation not permitted/bin/ping: => missing cap_net_raw+p capability or setuid? ping.0 2025-08-15 20:44:34.018 debug System command: /bin/ping -n -w 2 -c 1 192.168.178.24 ping.0 2025-08-15 20:44:34.017 debug Pinging offline 192.168.178.24 ping.0 2025-08-15 20:44:03.965 debug Ping result for 192.168.178.15: false in -ms (Tried 1/1 times) ping.0 2025-08-15 20:44:03.964 debug STDERR: /bin/ping: socktype: SOCK_RAW/bin/ping: socket: Operation not permitted/bin/ping: => missing cap_net_raw+p capability or setuid? ping.0 2025-08-15 20:44:03.961 debug System command: /bin/ping -n -w 2 -c 1 192.168.178.15 ping.0 2025-08-15 20:44:03.960 debug Ping result for 192.168.178.15: false in -ms (Tried 0/1 times) ping.0 2025-08-15 20:44:03.959 debug STDERR: /bin/ping: socktype: SOCK_RAW/bin/ping: socket: Operation not permitted/bin/ping: => missing cap_net_raw+p capability or setuid? ping.0 2025-08-15 20:44:03.955 debug System command: /bin/ping -n -w 2 -c 1 192.168.178.15 ping.0 2025-08-15 20:44:03.954 debug Pinging offline 192.168.178.15 ping.0 2025-08-15 20:44:03.903 debug Ping result for 192.168.178.14: false in -ms (Tried 1/1 times) ping.0 2025-08-15 20:44:03.902 debug STDERR: socktype: SOCK_RAW/bin/ping: socket: Operation not permitted/bin/ping: => missing cap_net_raw+p capability or setuid? ping.0 2025-08-15 20:44:03.901 debug STDERR: /bin/ping: ping.0 2025-08-15 20:44:03.896 debug System command: /bin/ping -n -w 2 -c 1 192.168.178.14 ping.0 2025-08-15 20:44:03.895 debug Ping result for 192.168.178.14: false in -ms (Tried 0/1 times) ping.0 2025-08-15 20:44:03.894 debug STDERR: socktype: SOCK_RAW/bin/ping: socket: Operation not permitted/bin/ping: => missing cap_net_raw+p capability or setuid? ping.0 2025-08-15 20:44:03.893 debug STDERR: /bin/ping: ping.0 2025-08-15 20:44:03.888 debug System command: /bin/ping -n -w 2 -c 1 192.168.178.14 ping.0 2025-08-15 20:44:03.887 debug Pinging offline 192.168.178.14 ping.0 2025-08-15 20:44:03.830 debug Ping result for 192.168.178.24: false in -ms (Tried 1/1 times) ping.0 2025-08-15 20:44:03.829 debug STDERR: /bin/ping: socktype: SOCK_RAW/bin/ping: socket: Operation not permitted/bin/ping: => missing cap_net_raw+p capability or setuid? ping.0 2025-08-15 20:44:03.822 debug System command: /bin/ping -n -w 2 -c 1 192.168.178.24 ping.0 2025-08-15 20:44:03.822 debug Ping result for 192.168.178.24: false in -ms (Tried 0/1 times) ping.0 2025-08-15 20:44:03.820 debug STDERR: socktype: SOCK_RAW/bin/ping: socket: Operation not permitted/bin/ping: => missing cap_net_raw+p capability or setuid? ping.0 2025-08-15 20:44:03.819 debug STDERR: /bin/ping: ping.0 2025-08-15 20:44:03.813 debug System command: /bin/ping -n -w 2 -c 1 192.168.178.24 ping.0 2025-08-15 20:44:03.812 debug Pinging offline 192.168.178.24 ping.0 2025-08-15 20:44:03.811 debug Start tasks of objects update ping.0 2025-08-15 20:44:03.809 debug Prepare tasks of objects update ping.0 2025-08-15 20:44:03.687 debug Get existing objects ping.0 2025-08-15 20:44:03.686 debug Host=DebianIO ping.0 2025-08-15 20:44:03.685 debug Prepare objects ping.0 2025-08-15 20:44:03.669 info starting. Version 1.6.2 in /opt/iobroker/node_modules/iobroker.ping, node: v20.19.4, js-controller: 7.0.6 ping.0 2025-08-15 20:44:03.220 debug Plugin sentry Initialize Plugin (enabled=true) ping.0 2025-08-15 20:44:03.161 debug States connected to redis: 127.0.0.1:9000 ping.0 2025-08-15 20:44:03.099 debug States create User PubSub Client ping.0 2025-08-15 20:44:03.098 debug States create System PubSub ClientKann es was mit admin rechten liegen?
