Fronius Wattpilot Test 4.0.x
-
@mg99
du kannst nicht direkt am Objekt ändern, sondern nur mittels set_state-Befehl
z.B.:
awp;4 bei set_state eintragen -
@hub01 ein Danke für den entscheidenden Hinweis, soweit funktioniert das jetzt, der Wert wird ins Objekt übernommen.
Allerdings werden "nur" ganzzahlige Werte eingelesen.
Kommawerte, egal ob mit Punkt oder Komma, sind abgeschnitten.Liegt das am Adapter?
Wie es manchmal so ist, hatte Fronius zeitgleich ein Problem mit der Software.
Ärgerlich nur genau zu dem Zeitpunkt meiner Tests, daher die späte Rückmeldung. -
@mg99
ist bei mir auch so und scheint ein Fehler im Adapter zu sein.Leider war der Entwickler schon lange nicht mehr hier.
Du kannst versuchen, das Problem bei Github einzustellen.Im Übrigen geht inzwischen auch OCPP. Hab ich aber selbst noch nicht probiert. Vl. geht es damit.
Ansonsten bleibt nur, direkt in der App eintragen. Ist ja „nur“ ein Grenzwert. -
@hub01 Irgendwie nervig ohne Kommastellen.
Du hast mit OCPP begonnen, wie ich gesehen habe.Mir fehlt das Wissen für die Anmeldung zum OCPP - Dienst.
Wie gehe ich da vor bzw. ist das überhaupt für einen Privaten gedacht?
Den OCPP-Schieberegler in der Fronius App auf "on" Stellen genügt nicht - was ist der Server dafür - gibt es eine Anleitung?
Fronius EMIL sagt mir zu wenig, außerdem erst ab 5 Ladestellen - das habe ich nicht.Im Iobroker den OCPP-Adapter hab ich installiert, aber dann....
-
@mg99
kannst du dir eigentlich ersparen,
bei mir funktioniert nur ein-/ausschalten, sonst nichts.Die Eco-Mode-Preisgrenze finde ich weder im Adapter noch in der Fronius Beschreibung.
Für die Beschreibung suche mal nach „Fronius Wattpilot OCPP“.Die Kopplung ist kein Aufwand.
Du gibst in der App die einzelnen Daten ein.
Die Server-Adresse wird normalerweise autom. generiert.- Benutzername/Passwort (für OPCC-Kopplung) kannst du frei vergeben.
- Host ist die IP von ioBroker inkl. Port aus Adapter, z.B. 192.168.10.123:9220
- Pfad ist ein frei vergebbarer Name, der dann in ioB als Ordner bei den Datenpunkten auftaucht
Im ioB OCPP-Adapter auch Benutzername, Passwort und Port eintragen.
Fertig, viel Glück -
Ich bekomme ständig Fehlermeldungen vom Wattpilot(-Adapter) im Protokoll.
Parallel werden keine Daten vom Wattpilot empfangen.
Ping zum Wattpilot geht aber in der Zeit.Hatte über 1 Jahr keine Updates durchgeführt (System funktionierte perfekt).
Vor ca. 3 Monaten habe ich das System und alle Adapter auf den neuesten Stand gebracht.
Anscheinend/vermutlich sind seitdem die Fehler vorhanden.z.B.:
2025-06-27 06:09:41.130 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST! 2025-06-27 06:09:47.200 - info: fronius-wattpilot.0 (1893) Connected! 2025-06-27 06:19:41.132 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST! 2025-06-27 06:19:43.696 - info: fronius-wattpilot.0 (1893) Connected! 2025-06-27 06:28:06.773 - error: fronius-wattpilot.0 (1893) Error after 69805877ms 2025-06-27 06:28:06.773 - error: fronius-wattpilot.0 (1893) Please check your host! Seams like your host is Offline, attempt to reconnect in 2.5 minutes 2025-06-27 06:32:11.134 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST! 2025-06-27 06:32:13.656 - info: fronius-wattpilot.0 (1893) Connected! 2025-06-27 06:37:11.136 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST! 2025-06-27 06:37:12.496 - info: fronius-wattpilot.0 (1893) Connected! 2025-06-27 06:44:41.137 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST! 2025-06-27 06:44:47.585 - info: fronius-wattpilot.0 (1893) Connected! 2025-06-27 06:48:11.812 - error: fronius-wattpilot.0 (1893) Error after 71010916ms 2025-06-27 06:48:11.813 - error: fronius-wattpilot.0 (1893) Please check your host! Seams like your host is Offline, attempt to reconnect in 2.5 minutes 2025-06-27 06:52:11.138 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST! 2025-06-27 06:52:13.962 - info: fronius-wattpilot.0 (1893) Connected! 2025-06-27 07:09:41.140 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST! 2025-06-27 07:09:42.600 - info: fronius-wattpilot.0 (1893) Connected!Habt Ihr diese Protokolleinträge und Fehler auch?
-
@hub01 sagte in Fronius Wattpilot Test 4.0.x:
Vor ca. 3 Monaten habe ich das System und alle Adapter auf den neuesten Stand gebracht.
Und welcher Stand ist das nun?
Gib mal die vollständige Ausgabe voniob diagzum Besten.
-
========== Start marking the full check here =========== ```bash Script v.2025-03-08 *** BASE SYSTEM *** Static hostname: NUC-ioB Icon name: computer-desktop Chassis: desktop 🖥️ Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-27-amd64 Architecture: x86-64 Hardware Vendor: Trigkey Hardware Model: Green G4 Firmware Version: ADLNV105 OS is similar to: model name : Intel(R) N95 Docker : false Virtualization : none Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 10:09:33 up 23:06, 3 users, load average: 0.24, 0.11, 0.10 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** TIME AND TIMEZONES *** Local time: Fri 2025-06-27 10:09:33 CEST Universal time: Fri 2025-06-27 08:09:33 UTC RTC time: Thu 2025-06-26 10:08:41 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: yes Warning: The system is configured to read the RTC time in the local time zone. This mode cannot be fully supported. It will create various problems with time zone changes and daylight saving time adjustments. The RTC time is never updated, it relies on external facilities to maintain it. If at all possible, use RTC in UTC by calling 'timedatectl set-local-rtc 0'. *** Users and Groups *** User that called 'iob diag': hub HOME=/home/hub GROUPS=hub root cdrom floppy sudo audio dip video plugdev users netdev bluetooth lpadmin scanner iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth *** DISPLAY-SERVER SETUP *** Display-Server: true Desktop: Terminal: tty System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 16G 3.4G 10G 154M 2.7G 13G Swap: 1.0G 0B 1.0G Total: 17G 3.4G 11G Active iob-Instances: 17 15770 M total memory 3196 M used memory 981 M active memory 3791 M inactive memory 10447 M free memory 603 M buffer memory 1997 M swap cache 976 M total swap 0 M used swap 976 M free swap *** top - Table Of Processes *** top - 10:09:33 up 23:06, 3 users, load average: 0.24, 0.11, 0.10 Tasks: 215 total, 1 running, 214 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 50.0 sy, 0.0 ni, 50.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 15770.7 total, 10447.3 free, 3197.1 used, 2601.4 buff/cache MiB Swap: 977.0 total, 977.0 free, 0.0 used. 12573.7 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 7.7G 0 7.7G 0% /dev tmpfs tmpfs 1.6G 1.7M 1.6G 1% /run /dev/nvme0n1p6 ext4 95G 33G 58G 37% / tmpfs tmpfs 7.8G 368K 7.8G 1% /dev/shm tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock /dev/nvme0n1p1 vfat 96M 40M 57M 41% /boot/efi /dev/nvme0n1p4 fuseblk 147G 134M 147G 1% /mnt/LW_Daten tmpfs tmpfs 1.6G 64K 1.6G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/nvme0n1p6 ext4 rw,relatime,errors=remount-ro |-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 |-/boot/efi /dev/nvme0n1p1 vfat rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro `-/mnt/LW_Daten /dev/nvme0n1p4 fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 Files in neuralgic directories: /var: 21G /var/ 17G /var/lib/influxdb/engine/data/fa93ac6301a26099/autogen 17G /var/lib/influxdb/engine/data/fa93ac6301a26099 17G /var/lib/influxdb/engine/data 17G /var/lib/influxdb/engine Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 108.6M in the file system. /opt/iobroker/backups: 39M /opt/iobroker/backups/ 4.0K /opt/iobroker/backups/node-red.0 /opt/iobroker/iobroker-data: 1.2G /opt/iobroker/iobroker-data/ 1.1G /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map 24M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.245b61c0.js.map 22M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.18496c94.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.18.0 /usr/bin/node v20.18.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.18.0-1nodesource1 Candidate: 20.19.3-1nodesource1 Version table: 20.19.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages *** 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main amd64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://security.debian.org/debian-security bookworm-security/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: NUC-ioB NUC-ioB (version: 7.0.6, hostname: NUC-ioB , alive, uptime: 83148) Core adapters versions js-controller: 7.0.6 admin: 7.6.3 javascript: 8.8.3 nodejs modules from github: 1 +-- iobroker.cloudless-homeconnect@1.6.1 (git+ssh://git@github.com/eifel-tech/ioBroker.cloudless-homeconnect.git#83a0ac8907173081ff9366fe1ffa1d7705055402) Adapter State + system.adapter.admin.0 : admin : NUC-ioB - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.backitup.0 : backitup : NUC-ioB - disabled system.adapter.bluelink.0 : bluelink : NUC-ioB - disabled system.adapter.cloudless-homeconnect.0 : cloudless-homeconnect : NUC-ioB - disabled system.adapter.devices.0 : devices : NUC-ioB - disabled system.adapter.discovery.0 : discovery : NUC-ioB - disabled + system.adapter.echarts.0 : echarts : NUC-ioB - enabled + system.adapter.ems-esp.0 : ems-esp : NUC-ioB - enabled + system.adapter.fronius-wattpilot.0 : fronius-wattpilot : NUC-ioB - enabled system.adapter.fronius-wattpilot.1 : fronius-wattpilot : NUC-ioB - disabled system.adapter.history.0 : history : NUC-ioB - disabled + system.adapter.influxdb.0 : influxdb : NUC-ioB - enabled, port: 8086 system.adapter.influxdb.1 : influxdb : NUC-ioB - disabled, port: 8086 + system.adapter.influxdb.2 : influxdb : NUC-ioB - enabled, port: 8086 + system.adapter.influxdb.3 : influxdb : NUC-ioB - enabled, port: 8086 system.adapter.jarvis.0 : jarvis : NUC-ioB - disabled + system.adapter.javascript.0 : javascript : NUC-ioB - enabled + system.adapter.logparser.0 : logparser : NUC-ioB - enabled system.adapter.modbus.0 : modbus : NUC-ioB - disabled + system.adapter.mqtt.0 : mqtt : NUC-ioB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : NUC-ioB - enabled, port: 1880, bind: 0.0.0.0 system.adapter.ocpp.0 : ocpp : NUC-ioB - disabled, port: 9220 + system.adapter.shelly.0 : shelly : NUC-ioB - enabled, port: 1882, bind: 0.0.0.0 system.adapter.shelly.1 : shelly : NUC-ioB - disabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : NUC-ioB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : NUC-ioB - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sun2000.0 : sun2000 : NUC-ioB - enabled, port: 6607 system.adapter.vis-2.0 : vis-2 : NUC-ioB - disabled system.adapter.vis-icontwo.0 : vis-icontwo : NUC-ioB - disabled system.adapter.vis-inventwo.0 : vis-inventwo : NUC-ioB - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : NUC-ioB - disabled system.adapter.vis.0 : vis : NUC-ioB - enabled + system.adapter.web.0 : web : NUC-ioB - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : NUC-ioB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : NUC-ioB - enabled, port: 8086 + system.adapter.influxdb.2 : influxdb : NUC-ioB - enabled, port: 8086 + system.adapter.influxdb.3 : influxdb : NUC-ioB - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : NUC-ioB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : NUC-ioB - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : NUC-ioB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : NUC-ioB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : NUC-ioB - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sun2000.0 : sun2000 : NUC-ioB - enabled, port: 6607 + system.adapter.web.0 : web : NUC-ioB - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.17 , installed 7.6.3 [Updatable] Adapter "backitup" : 3.2.2 , installed 3.0.22 [Updatable] Adapter "bluelink" : 3.1.3 , installed 2.3.6 [Updatable] Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 3.1.0 [Updatable] Adapter "echarts" : 1.9.2 , installed 1.7.2 [Updatable] Adapter "ems-esp" : 6.0.0 , installed 4.8.0 [Updatable] Adapter "fronius-wattpilot": 4.6.3, installed 4.6.3 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.9.2 , installed 8.8.3 [Updatable] Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "logparser" : 2.4.0 , installed 2.2.0 [Updatable] Adapter "modbus" : 6.3.2 , installed 6.2.3 [Updatable] Adapter "mqtt" : 6.1.2 , installed 5.2.0 [Updatable] Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "ocpp" : 0.12.5 , installed 0.12.5 Adapter "shelly" : 9.5.1 , installed 7.0.0 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sun2000" : 1.4.0 , installed 1.4.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.9.64 , installed 2.9.32 [Updatable] Adapter "vis-icontwo" : 1.11.0 , installed 0.96.0 [Updatable] Adapter "vis-inventwo" : 3.3.5 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 2.6.2 Objects and States Please stand by - This may take a while Objects: 2923 States: 2451 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://security.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 https://repos.influxdata.com/debian stable InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 239 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:7070 0.0.0.0:* LISTEN 0 23829 728/anydesk tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 25545 1654/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 26956 1749/io.mqtt.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 23415 1529/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 26192 1529/iobroker.js-co tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 15887 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 24711 756/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 292792 11338/cupsd tcp6 0 0 :::8081 :::* LISTEN 1001 26708 1565/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 27144 1862/io.web.0 tcp6 0 0 :::8084 :::* LISTEN 1001 28907 1878/io.socketio.0 tcp6 0 0 :::8087 :::* LISTEN 1001 26613 1828/io.simple-api. tcp6 0 0 :::8086 :::* LISTEN 999 25371 1470/influxd tcp6 0 0 :::7070 :::* LISTEN 0 23830 728/anydesk tcp6 0 0 ::1:631 :::* LISTEN 0 292791 11338/cupsd tcp6 0 0 :::3000 :::* LISTEN 115 26187 1528/grafana tcp6 0 0 :::111 :::* LISTEN 0 14708 1/init tcp6 0 0 :::22 :::* LISTEN 0 24713 756/sshd: /usr/sbin udp 0 0 0.0.0.0:111 0.0.0.0:* 0 16735 1/init udp 0 0 0.0.0.0:50001 0.0.0.0:* 0 25969 728/anydesk udp 0 0 0.0.0.0:51367 0.0.0.0:* 105 18801 619/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 105 18799 619/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 26981 1764/io.shelly.0 udp6 0 0 :::111 :::* 0 16736 1/init udp6 0 0 fe80::ca5d:455f:a41:546 :::* 0 484591 652/NetworkManager udp6 0 0 fe80::a2fe:1fbc:a31:546 :::* 0 19405 652/NetworkManager udp6 0 0 :::52281 :::* 105 18802 619/avahi-daemon: r udp6 0 0 :::5353 :::* 105 18800 619/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-06-27 08:20:26.775 - info: javascript.0 (1679) Stopping script script.js.HS_Test001.Test_setState 2025-06-27 08:20:26.870 - info: javascript.0 (1679) Start JavaScript script.js.HS_Test001.Test_setState (Javascript/js) 2025-06-27 08:20:26.895 - info: javascript.0 (1679) script.js.HS_Test001.Test_setState: registered 0 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2025-06-27 08:22:22.803 - info: javascript.0 (1679) Stopping script script.js.HS_Test001.Test_setState 2025-06-27 08:24:28.857 - info: admin.0 (1565) ==> Connected system.user.admin from ::ffff:192.168.0.182 2025-06-27 08:46:35.477 - info: web.0 (1862) ==> Connected system.user.admin from ::ffff:192.168.0.182 2025-06-27 08:46:35.840 - info: web.0 (1862) ==> Connected system.user.admin from ::ffff:192.168.0.182 2025-06-27 08:49:05.477 - info: web.0 (1862) <== Disconnect system.user.admin from ::ffff:192.168.0.182 2025-06-27 08:49:16.971 - info: web.0 (1862) <== Disconnect system.user.admin from ::ffff:192.168.0.182 vis.0 2025-06-27 09:00:00.009 - info: javascript.0 (1679) script.js.HS_Skripte.PV_Werte: Energie zur vollen Stunde gesichert 2025-06-27 09:17:11.152 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST! 2025-06-27 09:17:13.087 - info: fronius-wattpilot.0 (1893) Connected! 2025-06-27 09:24:41.154 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST! 2025-06-27 09:24:44.043 - info: fronius-wattpilot.0 (1893) Connected! 2025-06-27 09:28:33.683 - info: web.0 (1862) ==> Connected system.user.admin from ::ffff:192.168.0.182 2025-06-27 09:28:34.309 - info: web.0 (1862) ==> Connected system.user.admin from ::ffff:192.168.0.182 2025-06-27 09:31:03.683 - info: web.0 (1862) <== Disconnect system.user.admin from ::ffff:192.168.0.182 2025-06-27 09:31:15.415 - info: web.0 (1862) <== Disconnect system.user.admin from ::ffff:192.168.0.182 vis.0 2025-06-27 10:00:00.007 - info: javascript.0 (1679) script.js.HS_Skripte.PV_Werte: Energie zur vollen Stunde gesichert 2025-06-27 10:02:35.858 - info: admin.0 (1565) ==> Connected system.user.admin from ::ffff:192.168.0.182 2025-06-27 10:05:22.480 - info: javascript.0 (1679) Stopping script script.js.HS_Skripte.PV_Überschussladen 2025-06-27 10:05:22.529 - info: javascript.0 (1679) Start JavaScript script.js.HS_Skripte.PV_Überschussladen (Javascript/js) 2025-06-27 10:05:22.545 - info: javascript.0 (1679) script.js.HS_Skripte.PV_Überschussladen: registered 0 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions 2025-06-27 10:07:51.541 - info: web.0 (1862) ==> Connected system.user.admin from ::ffff:192.168.0.182 2025-06-27 10:07:52.536 - info: web.0 (1862) ==> Connected system.user.admin from ::ffff:192.168.0.182============ Mark until here for C&P =============
iob diag has finished.
-
@hub01 sagte in Fronius Wattpilot Test 4.0.x:
If at all possible, use RTC in UTC by calling 'timedatectl set-local-rtc 0'.
Setz die Echtzeituhr auf die Nullzeit.
Display-Server: true
Schalt den Display-Server aus.
Setz den User 'hub' in die Gruppe 'adm' rein. Im Gegenzug hat der in der Gruppe 'root' nix zu suchen.
Pending Updates: 239
Bring die Kiste auf den aktuellen Stand. Inkl. nodejs und der diversen ioB-Adapter.
Hatte über 1 Jahr keine Updates durchgeführt (System funktionierte perfekt).
'Never tatsch a running süstähm' ist ganz großer Schwachsinn.
Halt den Kram permanent und regelmäßig aktuell.Ist da eine FritzBox im Spiel?
-
@thomas-braun
Da muss ich mir ein wenig Zeit dazu nehmen (Backup, Updates).
Bin auch mit Linux nicht so fit. Werde ich aber hinbekommen.@thomas-braun sagte in Fronius Wattpilot Test 4.0.x:
Ist da eine FritzBox im Spiel?
Ja, eine 4040 als IP-Client an einer Vodafone-Station.
Die Endgeräte hängen alle an der Fritzbox. -
@thomas-braun
so, bin heute dazugekommen und habe deine Vorschläge abgearbeitet.
Hier das neue iob diag:========== Start marking the full check here =========== ```bash Script v.2025-03-08 *** BASE SYSTEM *** Static hostname: NUC-ioB Icon name: computer-desktop Chassis: desktop 🖥️ Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-37-amd64 Architecture: x86-64 Hardware Vendor: Trigkey Hardware Model: Green G4 Firmware Version: ADLNV105 OS is similar to: model name : Intel(R) N95 Docker : false Virtualization : none Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 17:35:37 up 9 min, 2 users, load average: 0.14, 0.18, 0.13 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** TIME AND TIMEZONES *** Local time: Thu 2025-07-03 17:35:37 CEST Universal time: Thu 2025-07-03 15:35:37 UTC RTC time: Thu 2025-07-03 15:35:37 Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': hub HOME=/home/hub GROUPS=hub adm cdrom floppy sudo audio dip video plugdev users netdev bluetooth lpadmin scanner iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 16G 2.3G 13G 12M 1.3G 14G Swap: 1.0G 0B 1.0G Total: 17G 2.3G 14G Active iob-Instances: 17 15770 M total memory 2175 M used memory 415 M active memory 2332 M inactive memory 12693 M free memory 115 M buffer memory 1100 M swap cache 976 M total swap 0 M used swap 976 M free swap *** top - Table Of Processes *** top - 17:35:37 up 9 min, 2 users, load average: 0.14, 0.18, 0.13 Tasks: 157 total, 1 running, 156 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 15770.7 total, 12693.5 free, 2175.1 used, 1215.3 buff/cache MiB Swap: 977.0 total, 977.0 free, 0.0 used. 13595.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 7.7G 0 7.7G 0% /dev tmpfs tmpfs 1.6G 1.6M 1.6G 1% /run /dev/nvme0n1p6 ext4 95G 33G 57G 37% / tmpfs tmpfs 7.8G 256K 7.8G 1% /dev/shm tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock /dev/nvme0n1p1 vfat 96M 40M 57M 41% /boot/efi /dev/nvme0n1p4 fuseblk 147G 134M 147G 1% /mnt/LW_Daten tmpfs tmpfs 1.6G 52K 1.6G 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Jul 3 17:25:49 2025] EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Quota mode: none. [Thu Jul 3 17:25:50 2025] EXT4-fs (nvme0n1p6): re-mounted. Quota mode: none. [Thu Jul 3 17:27:44 2025] snd_timer ecdh_generic iTCO_vendor_support snd mei_me pcspkr rfkill wmi_bmof watchdog ecc ee1004 soundcore mei intel_uncore intel_pmc_core acpi_pad acpi_tad evdev msr parport_pc ppdev lp parport loop fuse dm_mod efi_pstore configfs efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic spi_pxa2xx_platform dw_dmac dw_dmac_core nvme i915 nvme_core t10_pi ahci libahci drm_buddy i2c_algo_bit drm_display_helper libata cec crc64_rocksoft crc64 crc_t10dif rc_core crc32_pclmul ttm crc32c_intel r8169 xhci_pci crct10dif_generic drm_kms_helper realtek i2c_i801 crct10dif_pclmul i2c_smbus crct10dif_common xhci_hcd scsi_mod drm mdio_devres libphy usbcore scsi_common intel_lpss_pci intel_lpss idma64 usb_common fan video wmi pinctrl_alderlake button [Thu Jul 3 17:35:16 2025] cfg80211 snd_pcm iTCO_wdt intel_pmc_bxt intel_cstate snd_timer ecdh_generic iTCO_vendor_support snd mei_me pcspkr rfkill wmi_bmof watchdog ecc ee1004 soundcore mei intel_uncore intel_pmc_core acpi_pad acpi_tad evdev msr parport_pc ppdev lp parport loop fuse dm_mod efi_pstore configfs efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic spi_pxa2xx_platform dw_dmac dw_dmac_core nvme i915 nvme_core t10_pi ahci libahci drm_buddy i2c_algo_bit drm_display_helper libata cec crc64_rocksoft crc64 crc_t10dif rc_core crc32_pclmul ttm crc32c_intel r8169 xhci_pci crct10dif_generic drm_kms_helper realtek i2c_i801 crct10dif_pclmul i2c_smbus crct10dif_common xhci_hcd scsi_mod drm mdio_devres libphy usbcore scsi_common intel_lpss_pci intel_lpss idma64 usb_common fan video wmi pinctrl_alderlake button Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/nvme0n1p6 ext4 rw,relatime,errors=remount-ro |-/boot/efi /dev/nvme0n1p1 vfat rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro `-/mnt/LW_Daten /dev/nvme0n1p4 fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 Files in neuralgic directories: /var: 22G /var/ 18G /var/lib/influxdb/engine/data/fa93ac6301a26099/autogen 18G /var/lib/influxdb/engine/data/fa93ac6301a26099 18G /var/lib/influxdb/engine/data 18G /var/lib/influxdb/engine Archived and active journals take up 1.0G in the file system. /opt/iobroker/backups: 39M /opt/iobroker/backups/ 4.0K /opt/iobroker/backups/node-red.0 /opt/iobroker/iobroker-data: 657M /opt/iobroker/iobroker-data/ 547M /opt/iobroker/iobroker-data/files 156M /opt/iobroker/iobroker-data/files/vis-2 89M /opt/iobroker/iobroker-data/files/vis-2/static 88M /opt/iobroker/iobroker-data/files/vis-2/static/js The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 26M /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map 26M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map 25M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.3 /usr/bin/node v20.19.3 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.32.0 nodejs: Installed: 20.19.3-1nodesource1 Candidate: 20.19.3-1nodesource1 Version table: *** 20.19.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 20.19.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main amd64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://security.debian.org/debian-security bookworm-security/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: NUC-ioB NUC-ioB (version: 7.0.6, hostname: NUC-ioB , alive, uptime: 571) Core adapters versions js-controller: 7.0.6 admin: 7.6.17 javascript: 8.9.2 nodejs modules from github: 1 +-- iobroker.cloudless-homeconnect@1.6.1 (git+ssh://git@github.com/eifel-tech/ioBroker.cloudless-homeconnect.git#83a0ac8907173081ff9366fe1ffa1d7705055402) Adapter State + system.adapter.admin.0 : admin : NUC-ioB - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.backitup.0 : backitup : NUC-ioB - disabled system.adapter.bluelink.0 : bluelink : NUC-ioB - disabled system.adapter.cloudless-homeconnect.0 : cloudless-homeconnect : NUC-ioB - disabled system.adapter.devices.0 : devices : NUC-ioB - disabled system.adapter.discovery.0 : discovery : NUC-ioB - disabled + system.adapter.echarts.0 : echarts : NUC-ioB - enabled + system.adapter.ems-esp.0 : ems-esp : NUC-ioB - enabled + system.adapter.fronius-wattpilot.0 : fronius-wattpilot : NUC-ioB - enabled system.adapter.fronius-wattpilot.1 : fronius-wattpilot : NUC-ioB - disabled system.adapter.history.0 : history : NUC-ioB - disabled + system.adapter.influxdb.0 : influxdb : NUC-ioB - enabled, port: 8086 system.adapter.influxdb.1 : influxdb : NUC-ioB - disabled, port: 8086 + system.adapter.influxdb.2 : influxdb : NUC-ioB - enabled, port: 8086 + system.adapter.influxdb.3 : influxdb : NUC-ioB - enabled, port: 8086 system.adapter.jarvis.0 : jarvis : NUC-ioB - disabled + system.adapter.javascript.0 : javascript : NUC-ioB - enabled + system.adapter.logparser.0 : logparser : NUC-ioB - enabled system.adapter.modbus.0 : modbus : NUC-ioB - disabled + system.adapter.mqtt.0 : mqtt : NUC-ioB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : NUC-ioB - enabled, port: 1880, bind: 0.0.0.0 system.adapter.ocpp.0 : ocpp : NUC-ioB - disabled, port: 9220 + system.adapter.shelly.0 : shelly : NUC-ioB - enabled, port: 1882, bind: 0.0.0.0 system.adapter.shelly.1 : shelly : NUC-ioB - disabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : NUC-ioB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : NUC-ioB - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sun2000.0 : sun2000 : NUC-ioB - enabled, port: 6607 system.adapter.vis-2.0 : vis-2 : NUC-ioB - disabled system.adapter.vis-icontwo.0 : vis-icontwo : NUC-ioB - disabled system.adapter.vis-inventwo.0 : vis-inventwo : NUC-ioB - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : NUC-ioB - disabled system.adapter.vis.0 : vis : NUC-ioB - enabled + system.adapter.web.0 : web : NUC-ioB - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : NUC-ioB - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : NUC-ioB - enabled, port: 8086 + system.adapter.influxdb.2 : influxdb : NUC-ioB - enabled, port: 8086 + system.adapter.influxdb.3 : influxdb : NUC-ioB - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : NUC-ioB - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : NUC-ioB - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : NUC-ioB - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : NUC-ioB - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : NUC-ioB - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.sun2000.0 : sun2000 : NUC-ioB - enabled, port: 6607 + system.adapter.web.0 : web : NUC-ioB - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.17 , installed 7.6.17 Adapter "backitup" : 3.2.2 , installed 3.2.2 Adapter "bluelink" : 3.1.3 , installed 3.1.3 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "echarts" : 1.9.2 , installed 1.9.2 Adapter "ems-esp" : 6.0.0 , installed 6.0.0 Adapter "fronius-wattpilot": 4.6.3, installed 4.6.3 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "logparser" : 2.4.0 , installed 2.4.0 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "ocpp" : 0.12.5 , installed 0.12.5 Adapter "shelly" : 10.0.0 , installed 9.5.1 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sun2000" : 1.4.0 , installed 1.4.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "vis-icontwo" : 1.11.0 , installed 1.11.0 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 2.6.2 Objects and States Please stand by - This may take a while Objects: 2932 States: 2457 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://security.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 https://repos.influxdata.com/debian stable InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:7070 0.0.0.0:* LISTEN 0 21036 700/anydesk tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 23856 826/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 23449 826/iobroker.js-con tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 20996 696/cupsd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 23722 708/sshd: /usr/sbin tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 15867 1/init tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 25705 1092/io.mqtt.0 tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 24779 969/node-red tcp6 0 0 :::7070 :::* LISTEN 0 21037 700/anydesk tcp6 0 0 :::8082 :::* LISTEN 1001 25880 1205/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 23894 859/io.admin.0 tcp6 0 0 :::8086 :::* LISTEN 999 23816 773/influxd tcp6 0 0 :::8087 :::* LISTEN 1001 24353 1172/io.simple-api. tcp6 0 0 :::8084 :::* LISTEN 1001 24453 1223/io.socketio.0 tcp6 0 0 ::1:631 :::* LISTEN 0 20995 696/cupsd tcp6 0 0 :::3000 :::* LISTEN 115 21852 825/grafana tcp6 0 0 :::22 :::* LISTEN 0 23724 708/sshd: /usr/sbin tcp6 0 0 :::111 :::* LISTEN 0 15868 1/init udp 0 0 0.0.0.0:45493 0.0.0.0:* 105 16284 617/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 105 16282 617/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 25004 1111/io.shelly.0 udp 0 0 0.0.0.0:111 0.0.0.0:* 0 12816 1/init udp 0 0 0.0.0.0:50001 0.0.0.0:* 0 21095 700/anydesk udp6 0 0 :::5353 :::* 105 16283 617/avahi-daemon: r udp6 0 0 :::46323 :::* 105 16285 617/avahi-daemon: r udp6 0 0 :::111 :::* 0 13963 1/init udp6 0 0 fe80::ca5d:455f:a41:546 :::* 0 39873 647/NetworkManager udp6 0 0 fe80::a2fe:1fbc:a31:546 :::* 0 23771 647/NetworkManager *** Log File - Last 25 Lines *** 2025-07-03 17:27:01.895 - info: host.NUC-ioB instance system.adapter.vis.0 terminated while should be started once 2025-07-03 17:27:03.935 - info: host.NUC-ioB instance system.adapter.web.0 in version "7.0.8" started with pid 1205 2025-07-03 17:27:04.662 - info: web.0 (1205) starting. Version 7.0.8 in /opt/iobroker/node_modules/iobroker.web, node: v20.19.3, js-controller: 7.0.6 2025-07-03 17:27:04.767 - info: web.0 (1205) http server listening on port 8082 2025-07-03 17:27:04.807 - info: web.0 (1205) socket.io server listening on port 8082 2025-07-03 17:27:07.972 - info: host.NUC-ioB instance system.adapter.socketio.0 in version "6.7.1" started with pid 1223 2025-07-03 17:27:08.644 - info: socketio.0 (1223) starting. Version 6.7.1 in /opt/iobroker/node_modules/iobroker.socketio, node: v20.19.3, js-controller: 7.0.6 2025-07-03 17:27:08.675 - info: socketio.0 (1223) socket.io server listening on port 8084 2025-07-03 17:27:11.945 - info: host.NUC-ioB instance system.adapter.fronius-wattpilot.0 in version "4.6.3" started with pid 1238 2025-07-03 17:27:12.599 - info: fronius-wattpilot.0 (1238) starting. Version 4.6.3 in /opt/iobroker/node_modules/iobroker.fronius-wattpilot, node: v20.19.3, js-controller: 7.0.6 2025-07-03 17:27:12.607 - info: fronius-wattpilot.0 (1238) Try to connect to: ws://192.168.0.56/ws 2025-07-03 17:27:14.135 - info: fronius-wattpilot.0 (1238) Connected! 2025-07-03 17:27:37.960 - info: web.0 (1205) ==> Connected system.user.admin from ::ffff:192.168.0.182 2025-07-03 17:27:40.123 - info: web.0 (1205) ==> Connected system.user.admin from ::ffff:192.168.0.182 2025-07-03 17:28:00.291 - info: sun2000.0 (1142) Control: Service queue initialized 2025-07-03 17:28:11.147 - info: mqtt.0 (1092) Client [ESP32Solaranl_SmWLAN] connection closed: timeout 2025-07-03 17:30:08.560 - info: web.0 (1205) <== Disconnect system.user.admin from ::ffff:192.168.0.182 vis.0 2025-07-03 17:30:46.000 - info: mqtt.0 (1092) Client [ESP32Solaranl_SmLAN] reconnected. Old secret 1751556402180_8163. New secret 1751556645999_8153 2025-07-03 17:30:46.018 - info: mqtt.0 (1092) Client [ESP32Solaranl_SmWLAN] connected with secret 1751556646018_7474 2025-07-03 17:30:46.165 - info: mqtt.0 (1092) Client [ESP32Solaranl_SmLAN] subscribes on "mqtt.0.Solaranlage.Sendetakt" 2025-07-03 17:30:46.168 - info: mqtt.0 (1092) Client [ESP32Solaranl_SmWLAN] subscribes on "mqtt.0.Solaranlage.Sendetakt" 2025-07-03 17:30:46.171 - info: mqtt.0 (1092) Client [ESP32Solaranl_SmLAN] subscribes on "mqtt.0.Solaranlage.Sendetakt" 2025-07-03 17:30:46.365 - info: mqtt.0 (1092) Client [ESP32Solaranl_SmLAN] publishOnSubscribe 2025-07-03 17:30:46.369 - info: mqtt.0 (1092) Client [ESP32Solaranl_SmWLAN] publishOnSubscribe 2025-07-03 17:30:46.371 - info: mqtt.0 (1092) Client [ESP32Solaranl_SmLAN] publishOnSubscribe============ Mark until here for C&P =============
iob diag has finished.
-
@thomas-braun
Warum hast du nach der Fritzbox gefragt? -
Nach der FritzBüchse habe ich gefragt, weil ich da in den letzten Wochen/Monaten Probleme mit der DNS-Auflösung hatte und da diverse Adapter mit TimeOuts reagierten.
-
@thomas-braun
Sind die DNS-Probleme weg?
Musste man was machen? -
Ich fahre auf meiner FritzBox Cable 6660 die aktuelle Labor-Firmware.
Damit sind die Einträge bzgl. Netzwerkprobleme von diversen Adaptern deutlich zurückgegangen.
Nur der parcel-Adapter meldet jetzt noch regelmäßig unregelmäßig Verbindungsprobleme mit DHL. -
@thomas-braun
seit 4 Tagen keine Fehlermeldungen mehr vom Wattpilot-Adapter.
Ich denke, das Problem ist gelöst.Ursache?
Sowohl das Auftreten als auch das Verschwinden der Fehlermeldungen dürften die gemachten Updates gewesen sein.
