UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[mg99]

@hub01

Das habe ich bereits vorher probiert, bin ausgestiegen - habe (Android) alles geschlossen und bin frisch eingestiegen, leider keine Änderung.
Umgekehrt, also aus Android in den iobroker funktioniert es.

Wenn ich direkt am Objekt den Wert ändere, geht es auch nicht (Wert steht im iobroker rot).
Auch die Änderung im Objekt direkt, auf Writeable bringt nichts - daher zurückgestellt.

[hub01]

@mg99
du kannst nicht direkt am Objekt ändern, sondern nur mittels set_state-Befehl
z.B.:
awp;4 bei set_state eintragen

[mg99]

@hub01 ein Danke für den entscheidenden Hinweis, soweit funktioniert das jetzt, der Wert wird ins Objekt übernommen.
Allerdings werden "nur" ganzzahlige Werte eingelesen.
Kommawerte, egal ob mit Punkt oder Komma, sind abgeschnitten.

Liegt das am Adapter?

Wie es manchmal so ist, hatte Fronius zeitgleich ein Problem mit der Software.
Ärgerlich nur genau zu dem Zeitpunkt meiner Tests, daher die späte Rückmeldung.

[hub01]

@mg99
ist bei mir auch so und scheint ein Fehler im Adapter zu sein.

Leider war der Entwickler schon lange nicht mehr hier.
Du kannst versuchen, das Problem bei Github einzustellen.

Im Übrigen geht inzwischen auch OCPP. Hab ich aber selbst noch nicht probiert. Vl. geht es damit.
Ansonsten bleibt nur, direkt in der App eintragen. Ist ja „nur“ ein Grenzwert.

[mg99]

@hub01 Irgendwie nervig ohne Kommastellen. ;-)
Du hast mit OCPP begonnen, wie ich gesehen habe.

Mir fehlt das Wissen für die Anmeldung zum OCPP - Dienst.
Wie gehe ich da vor bzw. ist das überhaupt für einen Privaten gedacht?
Den OCPP-Schieberegler in der Fronius App auf "on" Stellen genügt nicht - was ist der Server dafür - gibt es eine Anleitung?
Fronius EMIL sagt mir zu wenig, außerdem erst ab 5 Ladestellen - das habe ich nicht.

Im Iobroker den OCPP-Adapter hab ich installiert, aber dann....

[hub01]

@mg99
kannst du dir eigentlich ersparen,
bei mir funktioniert nur ein-/ausschalten, sonst nichts.

Die Eco-Mode-Preisgrenze finde ich weder im Adapter noch in der Fronius Beschreibung.
Für die Beschreibung suche mal nach „Fronius Wattpilot OCPP“.

Die Kopplung ist kein Aufwand.
Du gibst in der App die einzelnen Daten ein.
Die Server-Adresse wird normalerweise autom. generiert.

• Benutzername/Passwort (für OPCC-Kopplung) kannst du frei vergeben.
• Host ist die IP von ioBroker inkl. Port aus Adapter, z.B. 192.168.10.123:9220
• Pfad ist ein frei vergebbarer Name, der dann in ioB als Ordner bei den Datenpunkten auftaucht

Im ioB OCPP-Adapter auch Benutzername, Passwort und Port eintragen.
Fertig, viel Glück

[hub01]

Ich bekomme ständig Fehlermeldungen vom Wattpilot(-Adapter) im Protokoll.
Parallel werden keine Daten vom Wattpilot empfangen.
Ping zum Wattpilot geht aber in der Zeit.

Hatte über 1 Jahr keine Updates durchgeführt (System funktionierte perfekt).
Vor ca. 3 Monaten habe ich das System und alle Adapter auf den neuesten Stand gebracht.
Anscheinend/vermutlich sind seitdem die Fehler vorhanden.

z.B.:

2025-06-27 06:09:41.130 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST!
2025-06-27 06:09:47.200 - info: fronius-wattpilot.0 (1893) Connected!
2025-06-27 06:19:41.132 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST!
2025-06-27 06:19:43.696 - info: fronius-wattpilot.0 (1893) Connected!
2025-06-27 06:28:06.773 - error: fronius-wattpilot.0 (1893) Error after 69805877ms
2025-06-27 06:28:06.773 - error: fronius-wattpilot.0 (1893) Please check your host! Seams like your host is Offline, attempt to reconnect in 2.5 minutes
2025-06-27 06:32:11.134 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST!
2025-06-27 06:32:13.656 - info: fronius-wattpilot.0 (1893) Connected!
2025-06-27 06:37:11.136 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST!
2025-06-27 06:37:12.496 - info: fronius-wattpilot.0 (1893) Connected!
2025-06-27 06:44:41.137 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST!
2025-06-27 06:44:47.585 - info: fronius-wattpilot.0 (1893) Connected!
2025-06-27 06:48:11.812 - error: fronius-wattpilot.0 (1893) Error after 71010916ms
2025-06-27 06:48:11.813 - error: fronius-wattpilot.0 (1893) Please check your host! Seams like your host is Offline, attempt to reconnect in 2.5 minutes
2025-06-27 06:52:11.138 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST!
2025-06-27 06:52:13.962 - info: fronius-wattpilot.0 (1893) Connected!
2025-06-27 07:09:41.140 - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST!
2025-06-27 07:09:42.600 - info: fronius-wattpilot.0 (1893) Connected!

Habt Ihr diese Protokolleinträge und Fehler auch?

[Thomas Braun]

@hub01 sagte in Fronius Wattpilot Test 4.0.x:

Vor ca. 3 Monaten habe ich das System und alle Adapter auf den neuesten Stand gebracht.

Und welcher Stand ist das nun?
Gib mal die vollständige Ausgabe von

iob diag

zum Besten.

[hub01]

@thomas-braun

========== Start marking the full check here ===========

```bash
Script v.2025-03-08

*** BASE SYSTEM ***
 Static hostname: NUC-ioB
       Icon name: computer-desktop
         Chassis: desktop 🖥️
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-27-amd64
    Architecture: x86-64
 Hardware Vendor: Trigkey
  Hardware Model: Green G4
Firmware Version: ADLNV105
OS is similar to:

model name      : Intel(R) N95
Docker          : false
Virtualization  : none
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 10:09:33 up 23:06,  3 users,  load average: 0.24, 0.11, 0.10
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** TIME AND TIMEZONES ***
               Local time: Fri 2025-06-27 10:09:33 CEST
           Universal time: Fri 2025-06-27 08:09:33 UTC
                 RTC time: Thu 2025-06-26 10:08:41
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: yes

Warning: The system is configured to read the RTC time in the local time zone.
         This mode cannot be fully supported. It will create various problems
         with time zone changes and daylight saving time adjustments. The RTC
         time is never updated, it relies on external facilities to maintain it.
         If at all possible, use RTC in UTC by calling
         'timedatectl set-local-rtc 0'.

*** Users and Groups ***
User that called 'iob diag':
hub
HOME=/home/hub
GROUPS=hub root cdrom floppy sudo audio dip video plugdev users netdev bluetooth lpadmin scanner iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth

*** DISPLAY-SERVER SETUP ***
Display-Server: true
Desktop:
Terminal:       tty

System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:             16G        3.4G         10G        154M        2.7G         13G
Swap:           1.0G          0B        1.0G
Total:           17G        3.4G         11G

Active iob-Instances:   17

        15770 M total memory
         3196 M used memory
          981 M active memory
         3791 M inactive memory
        10447 M free memory
          603 M buffer memory
         1997 M swap cache
          976 M total swap
            0 M used swap
          976 M free swap

*** top - Table Of Processes  ***
top - 10:09:33 up 23:06,  3 users,  load average: 0.24, 0.11, 0.10
Tasks: 215 total,   1 running, 214 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us, 50.0 sy,  0.0 ni, 50.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :  15770.7 total,  10447.3 free,   3197.1 used,   2601.4 buff/cache
MiB Swap:    977.0 total,    977.0 free,      0.0 used.  12573.7 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  7.7G     0  7.7G   0% /dev
tmpfs          tmpfs     1.6G  1.7M  1.6G   1% /run
/dev/nvme0n1p6 ext4       95G   33G   58G  37% /
tmpfs          tmpfs     7.8G  368K  7.8G   1% /dev/shm
tmpfs          tmpfs     5.0M  8.0K  5.0M   1% /run/lock
/dev/nvme0n1p1 vfat       96M   40M   57M  41% /boot/efi
/dev/nvme0n1p4 fuseblk   147G  134M  147G   1% /mnt/LW_Daten
tmpfs          tmpfs     1.6G   64K  1.6G   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:

Show mounted filesystems:
TARGET               SOURCE         FSTYPE      OPTIONS
/                    /dev/nvme0n1p6 ext4        rw,relatime,errors=remount-ro
|-/run/user/1000/doc portal         fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000
|-/boot/efi          /dev/nvme0n1p1 vfat        rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro
`-/mnt/LW_Daten      /dev/nvme0n1p4 fuseblk     rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096

Files in neuralgic directories:

/var:
21G     /var/
17G     /var/lib/influxdb/engine/data/fa93ac6301a26099/autogen
17G     /var/lib/influxdb/engine/data/fa93ac6301a26099
17G     /var/lib/influxdb/engine/data
17G     /var/lib/influxdb/engine

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 108.6M in the file system.

/opt/iobroker/backups:
39M     /opt/iobroker/backups/
4.0K    /opt/iobroker/backups/node-red.0

/opt/iobroker/iobroker-data:
1.2G    /opt/iobroker/iobroker-data/
1.1G    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
24M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map
24M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.245b61c0.js.map
22M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.18496c94.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.0
/usr/bin/node           v20.18.0
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.29.3

nodejs:
  Installed: 20.18.0-1nodesource1
  Candidate: 20.19.3-1nodesource1
  Version table:
     20.19.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
 *** 20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main amd64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://security.debian.org/debian-security bookworm-security/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
NUC-ioB             NUC-ioB (version: 7.0.6, hostname: NUC-ioB       , alive, uptime: 83148)

Core adapters versions
js-controller:  7.0.6
admin:          7.6.3
javascript:     8.8.3

nodejs modules from github:     1
+-- iobroker.cloudless-homeconnect@1.6.1 (git+ssh://git@github.com/eifel-tech/ioBroker.cloudless-homeconnect.git#83a0ac8907173081ff9366fe1ffa1d7705055402)

Adapter State
+ system.adapter.admin.0                  : admin                 : NUC-ioB                                  -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.backitup.0               : backitup              : NUC-ioB                                  - disabled
  system.adapter.bluelink.0               : bluelink              : NUC-ioB                                  - disabled
  system.adapter.cloudless-homeconnect.0  : cloudless-homeconnect : NUC-ioB                                  - disabled
  system.adapter.devices.0                : devices               : NUC-ioB                                  - disabled
  system.adapter.discovery.0              : discovery             : NUC-ioB                                  - disabled
+ system.adapter.echarts.0                : echarts               : NUC-ioB                                  -  enabled
+ system.adapter.ems-esp.0                : ems-esp               : NUC-ioB                                  -  enabled
+ system.adapter.fronius-wattpilot.0      : fronius-wattpilot     : NUC-ioB                                  -  enabled
  system.adapter.fronius-wattpilot.1      : fronius-wattpilot     : NUC-ioB                                  - disabled
  system.adapter.history.0                : history               : NUC-ioB                                  - disabled
+ system.adapter.influxdb.0               : influxdb              : NUC-ioB                                  -  enabled, port: 8086
  system.adapter.influxdb.1               : influxdb              : NUC-ioB                                  - disabled, port: 8086
+ system.adapter.influxdb.2               : influxdb              : NUC-ioB                                  -  enabled, port: 8086
+ system.adapter.influxdb.3               : influxdb              : NUC-ioB                                  -  enabled, port: 8086
  system.adapter.jarvis.0                 : jarvis                : NUC-ioB                                  - disabled
+ system.adapter.javascript.0             : javascript            : NUC-ioB                                  -  enabled
+ system.adapter.logparser.0              : logparser             : NUC-ioB                                  -  enabled
  system.adapter.modbus.0                 : modbus                : NUC-ioB                                  - disabled
+ system.adapter.mqtt.0                   : mqtt                  : NUC-ioB                                  -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : NUC-ioB                                  -  enabled, port: 1880, bind: 0.0.0.0
  system.adapter.ocpp.0                   : ocpp                  : NUC-ioB                                  - disabled, port: 9220
+ system.adapter.shelly.0                 : shelly                : NUC-ioB                                  -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.shelly.1                 : shelly                : NUC-ioB                                  - disabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : NUC-ioB                                  -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.socketio.0               : socketio              : NUC-ioB                                  -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sun2000.0                : sun2000               : NUC-ioB                                  -  enabled, port: 6607
  system.adapter.vis-2.0                  : vis-2                 : NUC-ioB                                  - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : NUC-ioB                                  - disabled
  system.adapter.vis-inventwo.0           : vis-inventwo          : NUC-ioB                                  - disabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : NUC-ioB                                  - disabled
  system.adapter.vis.0                    : vis                   : NUC-ioB                                  -  enabled
+ system.adapter.web.0                    : web                   : NUC-ioB                                  -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : NUC-ioB                                  -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : NUC-ioB                                  -  enabled, port: 8086
+ system.adapter.influxdb.2               : influxdb              : NUC-ioB                                  -  enabled, port: 8086
+ system.adapter.influxdb.3               : influxdb              : NUC-ioB                                  -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : NUC-ioB                                  -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : NUC-ioB                                  -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : NUC-ioB                                  -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : NUC-ioB                                  -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.socketio.0               : socketio              : NUC-ioB                                  -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sun2000.0                : sun2000               : NUC-ioB                                  -  enabled, port: 6607
+ system.adapter.web.0                    : web                   : NUC-ioB                                  -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.6.17   , installed 7.6.3  [Updatable]
Adapter    "backitup"     : 3.2.2    , installed 3.0.22 [Updatable]
Adapter    "bluelink"     : 3.1.3    , installed 2.3.6  [Updatable]
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 5.0.0    , installed 3.1.0  [Updatable]
Adapter    "echarts"      : 1.9.2    , installed 1.7.2  [Updatable]
Adapter    "ems-esp"      : 6.0.0    , installed 4.8.0  [Updatable]
Adapter    "fronius-wattpilot": 4.6.3, installed 4.6.3
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 8.9.2    , installed 8.8.3  [Updatable]
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "logparser"    : 2.4.0    , installed 2.2.0  [Updatable]
Adapter    "modbus"       : 6.3.2    , installed 6.2.3  [Updatable]
Adapter    "mqtt"         : 6.1.2    , installed 5.2.0  [Updatable]
Adapter    "node-red"     : 5.2.1    , installed 5.2.1
Adapter    "ocpp"         : 0.12.5   , installed 0.12.5
Adapter    "shelly"       : 9.5.1    , installed 7.0.0  [Updatable]
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "sun2000"      : 1.4.0    , installed 1.4.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.9.64   , installed 2.9.32 [Updatable]
Adapter    "vis-icontwo"  : 1.11.0   , installed 0.96.0 [Updatable]
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.3  [Updatable]
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 2.6.2

Objects and States
Please stand by - This may take a while
Objects:        2923
States:         2451

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://security.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 https://repos.influxdata.com/debian stable InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 239

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:7070            0.0.0.0:*               LISTEN      0          23829      728/anydesk
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      1001       25545      1654/node-red
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       26956      1749/io.mqtt.0
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       23415      1529/iobroker.js-co
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       26192      1529/iobroker.js-co
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          15887      1/init
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          24711      756/sshd: /usr/sbin
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          292792     11338/cupsd
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       26708      1565/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       27144      1862/io.web.0
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       28907      1878/io.socketio.0
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       26613      1828/io.simple-api.
tcp6       0      0 :::8086                 :::*                    LISTEN      999        25371      1470/influxd
tcp6       0      0 :::7070                 :::*                    LISTEN      0          23830      728/anydesk
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          292791     11338/cupsd
tcp6       0      0 :::3000                 :::*                    LISTEN      115        26187      1528/grafana
tcp6       0      0 :::111                  :::*                    LISTEN      0          14708      1/init
tcp6       0      0 :::22                   :::*                    LISTEN      0          24713      756/sshd: /usr/sbin
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          16735      1/init
udp        0      0 0.0.0.0:50001           0.0.0.0:*                           0          25969      728/anydesk
udp        0      0 0.0.0.0:51367           0.0.0.0:*                           105        18801      619/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           105        18799      619/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       26981      1764/io.shelly.0
udp6       0      0 :::111                  :::*                                0          16736      1/init
udp6       0      0 fe80::ca5d:455f:a41:546 :::*                                0          484591     652/NetworkManager
udp6       0      0 fe80::a2fe:1fbc:a31:546 :::*                                0          19405      652/NetworkManager
udp6       0      0 :::52281                :::*                                105        18802      619/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                105        18800      619/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-06-27 08:20:26.775  - info: javascript.0 (1679) Stopping script script.js.HS_Test001.Test_setState
2025-06-27 08:20:26.870  - info: javascript.0 (1679) Start JavaScript script.js.HS_Test001.Test_setState (Javascript/js)
2025-06-27 08:20:26.895  - info: javascript.0 (1679) script.js.HS_Test001.Test_setState: registered 0 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions
2025-06-27 08:22:22.803  - info: javascript.0 (1679) Stopping script script.js.HS_Test001.Test_setState
2025-06-27 08:24:28.857  - info: admin.0 (1565) ==> Connected system.user.admin from ::ffff:192.168.0.182
2025-06-27 08:46:35.477  - info: web.0 (1862) ==> Connected system.user.admin from ::ffff:192.168.0.182
2025-06-27 08:46:35.840  - info: web.0 (1862) ==> Connected system.user.admin from ::ffff:192.168.0.182
2025-06-27 08:49:05.477  - info: web.0 (1862) <== Disconnect system.user.admin from ::ffff:192.168.0.182
2025-06-27 08:49:16.971  - info: web.0 (1862) <== Disconnect system.user.admin from ::ffff:192.168.0.182 vis.0
2025-06-27 09:00:00.009  - info: javascript.0 (1679) script.js.HS_Skripte.PV_Werte: Energie zur vollen Stunde gesichert
2025-06-27 09:17:11.152  - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST!
2025-06-27 09:17:13.087  - info: fronius-wattpilot.0 (1893) Connected!
2025-06-27 09:24:41.154  - info: fronius-wattpilot.0 (1893) Try to reconnect... Connection LOST!
2025-06-27 09:24:44.043  - info: fronius-wattpilot.0 (1893) Connected!
2025-06-27 09:28:33.683  - info: web.0 (1862) ==> Connected system.user.admin from ::ffff:192.168.0.182
2025-06-27 09:28:34.309  - info: web.0 (1862) ==> Connected system.user.admin from ::ffff:192.168.0.182
2025-06-27 09:31:03.683  - info: web.0 (1862) <== Disconnect system.user.admin from ::ffff:192.168.0.182
2025-06-27 09:31:15.415  - info: web.0 (1862) <== Disconnect system.user.admin from ::ffff:192.168.0.182 vis.0
2025-06-27 10:00:00.007  - info: javascript.0 (1679) script.js.HS_Skripte.PV_Werte: Energie zur vollen Stunde gesichert
2025-06-27 10:02:35.858  - info: admin.0 (1565) ==> Connected system.user.admin from ::ffff:192.168.0.182
2025-06-27 10:05:22.480  - info: javascript.0 (1679) Stopping script script.js.HS_Skripte.PV_Überschussladen
2025-06-27 10:05:22.529  - info: javascript.0 (1679) Start JavaScript script.js.HS_Skripte.PV_Überschussladen (Javascript/js)
2025-06-27 10:05:22.545  - info: javascript.0 (1679) script.js.HS_Skripte.PV_Überschussladen: registered 0 subscriptions, 0 schedules, 0 messages, 0 logs and 0 file subscriptions
2025-06-27 10:07:51.541  - info: web.0 (1862) ==> Connected system.user.admin from ::ffff:192.168.0.182
2025-06-27 10:07:52.536  - info: web.0 (1862) ==> Connected system.user.admin from ::ffff:192.168.0.182

============ Mark until here for C&P =============

iob diag has finished.

[Thomas Braun]

@hub01 sagte in Fronius Wattpilot Test 4.0.x:

If at all possible, use RTC in UTC by calling 'timedatectl set-local-rtc 0'.

Setz die Echtzeituhr auf die Nullzeit.

Display-Server: true

Schalt den Display-Server aus.

Setz den User 'hub' in die Gruppe 'adm' rein. Im Gegenzug hat der in der Gruppe 'root' nix zu suchen.

Pending Updates: 239

Bring die Kiste auf den aktuellen Stand. Inkl. nodejs und der diversen ioB-Adapter.

Hatte über 1 Jahr keine Updates durchgeführt (System funktionierte perfekt).

'Never tatsch a running süstähm' ist ganz großer Schwachsinn.
Halt den Kram permanent und regelmäßig aktuell.

Ist da eine FritzBox im Spiel?

[hub01]

@thomas-braun
Da muss ich mir ein wenig Zeit dazu nehmen (Backup, Updates).
Bin auch mit Linux nicht so fit. Werde ich aber hinbekommen.

@thomas-braun sagte in Fronius Wattpilot Test 4.0.x:

Ist da eine FritzBox im Spiel?

Ja, eine 4040 als IP-Client an einer Vodafone-Station.
Die Endgeräte hängen alle an der Fritzbox.

[hub01]

@thomas-braun
so, bin heute dazugekommen und habe deine Vorschläge abgearbeitet.
Hier das neue iob diag:

========== Start marking the full check here ===========

```bash
Script v.2025-03-08

*** BASE SYSTEM ***
 Static hostname: NUC-ioB
       Icon name: computer-desktop
         Chassis: desktop 🖥️
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-37-amd64
    Architecture: x86-64
 Hardware Vendor: Trigkey
  Hardware Model: Green G4
Firmware Version: ADLNV105
OS is similar to:

model name      : Intel(R) N95
Docker          : false
Virtualization  : none
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 17:35:37 up 9 min,  2 users,  load average: 0.14, 0.18, 0.13
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** TIME AND TIMEZONES ***
               Local time: Thu 2025-07-03 17:35:37 CEST
           Universal time: Thu 2025-07-03 15:35:37 UTC
                 RTC time: Thu 2025-07-03 15:35:37
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
hub
HOME=/home/hub
GROUPS=hub adm cdrom floppy sudo audio dip video plugdev users netdev bluetooth lpadmin scanner iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:             16G        2.3G         13G         12M        1.3G         14G
Swap:           1.0G          0B        1.0G
Total:           17G        2.3G         14G

Active iob-Instances:   17

        15770 M total memory
         2175 M used memory
          415 M active memory
         2332 M inactive memory
        12693 M free memory
          115 M buffer memory
         1100 M swap cache
          976 M total swap
            0 M used swap
          976 M free swap

*** top - Table Of Processes  ***
top - 17:35:37 up 9 min,  2 users,  load average: 0.14, 0.18, 0.13
Tasks: 157 total,   1 running, 156 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni,100.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :  15770.7 total,  12693.5 free,   2175.1 used,   1215.3 buff/cache
MiB Swap:    977.0 total,    977.0 free,      0.0 used.  13595.6 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  7.7G     0  7.7G   0% /dev
tmpfs          tmpfs     1.6G  1.6M  1.6G   1% /run
/dev/nvme0n1p6 ext4       95G   33G   57G  37% /
tmpfs          tmpfs     7.8G  256K  7.8G   1% /dev/shm
tmpfs          tmpfs     5.0M  8.0K  5.0M   1% /run/lock
/dev/nvme0n1p1 vfat       96M   40M   57M  41% /boot/efi
/dev/nvme0n1p4 fuseblk   147G  134M  147G   1% /mnt/LW_Daten
tmpfs          tmpfs     1.6G   52K  1.6G   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Jul  3 17:25:49 2025] EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Quota mode: none.
[Thu Jul  3 17:25:50 2025] EXT4-fs (nvme0n1p6): re-mounted. Quota mode: none.
[Thu Jul  3 17:27:44 2025]  snd_timer ecdh_generic iTCO_vendor_support snd mei_me pcspkr rfkill wmi_bmof watchdog ecc ee1004 soundcore mei intel_uncore intel_pmc_core acpi_pad acpi_tad evdev msr parport_pc ppdev lp parport loop fuse dm_mod efi_pstore configfs efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic spi_pxa2xx_platform dw_dmac dw_dmac_core nvme i915 nvme_core t10_pi ahci libahci drm_buddy i2c_algo_bit drm_display_helper libata cec crc64_rocksoft crc64 crc_t10dif rc_core crc32_pclmul ttm crc32c_intel r8169 xhci_pci crct10dif_generic drm_kms_helper realtek i2c_i801 crct10dif_pclmul i2c_smbus crct10dif_common xhci_hcd scsi_mod drm mdio_devres libphy usbcore scsi_common intel_lpss_pci intel_lpss idma64 usb_common fan video wmi pinctrl_alderlake button
[Thu Jul  3 17:35:16 2025]  cfg80211 snd_pcm iTCO_wdt intel_pmc_bxt intel_cstate snd_timer ecdh_generic iTCO_vendor_support snd mei_me pcspkr rfkill wmi_bmof watchdog ecc ee1004 soundcore mei intel_uncore intel_pmc_core acpi_pad acpi_tad evdev msr parport_pc ppdev lp parport loop fuse dm_mod efi_pstore configfs efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic spi_pxa2xx_platform dw_dmac dw_dmac_core nvme i915 nvme_core t10_pi ahci libahci drm_buddy i2c_algo_bit drm_display_helper libata cec crc64_rocksoft crc64 crc_t10dif rc_core crc32_pclmul ttm crc32c_intel r8169 xhci_pci crct10dif_generic drm_kms_helper realtek i2c_i801 crct10dif_pclmul i2c_smbus crct10dif_common xhci_hcd scsi_mod drm mdio_devres libphy usbcore scsi_common intel_lpss_pci intel_lpss idma64 usb_common fan video wmi pinctrl_alderlake button

Show mounted filesystems:
TARGET          SOURCE         FSTYPE  OPTIONS
/               /dev/nvme0n1p6 ext4    rw,relatime,errors=remount-ro
|-/boot/efi     /dev/nvme0n1p1 vfat    rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro
`-/mnt/LW_Daten /dev/nvme0n1p4 fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096

Files in neuralgic directories:

/var:
22G     /var/
18G     /var/lib/influxdb/engine/data/fa93ac6301a26099/autogen
18G     /var/lib/influxdb/engine/data/fa93ac6301a26099
18G     /var/lib/influxdb/engine/data
18G     /var/lib/influxdb/engine

Archived and active journals take up 1.0G in the file system.

/opt/iobroker/backups:
39M     /opt/iobroker/backups/
4.0K    /opt/iobroker/backups/node-red.0

/opt/iobroker/iobroker-data:
657M    /opt/iobroker/iobroker-data/
547M    /opt/iobroker/iobroker-data/files
156M    /opt/iobroker/iobroker-data/files/vis-2
89M     /opt/iobroker/iobroker-data/files/vis-2/static
88M     /opt/iobroker/iobroker-data/files/vis-2/static/js

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
26M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
25M     /opt/iobroker/iobroker-data/objects.jsonl
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.3
/usr/bin/node           v20.19.3
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.32.0

nodejs:
  Installed: 20.19.3-1nodesource1
  Candidate: 20.19.3-1nodesource1
  Version table:
 *** 20.19.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     20.19.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main amd64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://security.debian.org/debian-security bookworm-security/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
NUC-ioB             NUC-ioB (version: 7.0.6, hostname: NUC-ioB       , alive, uptime: 571)

Core adapters versions
js-controller:  7.0.6
admin:          7.6.17
javascript:     8.9.2

nodejs modules from github:     1
+-- iobroker.cloudless-homeconnect@1.6.1 (git+ssh://git@github.com/eifel-tech/ioBroker.cloudless-homeconnect.git#83a0ac8907173081ff9366fe1ffa1d7705055402)

Adapter State
+ system.adapter.admin.0                  : admin                 : NUC-ioB                                  -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.backitup.0               : backitup              : NUC-ioB                                  - disabled
  system.adapter.bluelink.0               : bluelink              : NUC-ioB                                  - disabled
  system.adapter.cloudless-homeconnect.0  : cloudless-homeconnect : NUC-ioB                                  - disabled
  system.adapter.devices.0                : devices               : NUC-ioB                                  - disabled
  system.adapter.discovery.0              : discovery             : NUC-ioB                                  - disabled
+ system.adapter.echarts.0                : echarts               : NUC-ioB                                  -  enabled
+ system.adapter.ems-esp.0                : ems-esp               : NUC-ioB                                  -  enabled
+ system.adapter.fronius-wattpilot.0      : fronius-wattpilot     : NUC-ioB                                  -  enabled
  system.adapter.fronius-wattpilot.1      : fronius-wattpilot     : NUC-ioB                                  - disabled
  system.adapter.history.0                : history               : NUC-ioB                                  - disabled
+ system.adapter.influxdb.0               : influxdb              : NUC-ioB                                  -  enabled, port: 8086
  system.adapter.influxdb.1               : influxdb              : NUC-ioB                                  - disabled, port: 8086
+ system.adapter.influxdb.2               : influxdb              : NUC-ioB                                  -  enabled, port: 8086
+ system.adapter.influxdb.3               : influxdb              : NUC-ioB                                  -  enabled, port: 8086
  system.adapter.jarvis.0                 : jarvis                : NUC-ioB                                  - disabled
+ system.adapter.javascript.0             : javascript            : NUC-ioB                                  -  enabled
+ system.adapter.logparser.0              : logparser             : NUC-ioB                                  -  enabled
  system.adapter.modbus.0                 : modbus                : NUC-ioB                                  - disabled
+ system.adapter.mqtt.0                   : mqtt                  : NUC-ioB                                  -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : NUC-ioB                                  -  enabled, port: 1880, bind: 0.0.0.0
  system.adapter.ocpp.0                   : ocpp                  : NUC-ioB                                  - disabled, port: 9220
+ system.adapter.shelly.0                 : shelly                : NUC-ioB                                  -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.shelly.1                 : shelly                : NUC-ioB                                  - disabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : NUC-ioB                                  -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.socketio.0               : socketio              : NUC-ioB                                  -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sun2000.0                : sun2000               : NUC-ioB                                  -  enabled, port: 6607
  system.adapter.vis-2.0                  : vis-2                 : NUC-ioB                                  - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : NUC-ioB                                  - disabled
  system.adapter.vis-inventwo.0           : vis-inventwo          : NUC-ioB                                  - disabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : NUC-ioB                                  - disabled
  system.adapter.vis.0                    : vis                   : NUC-ioB                                  -  enabled
+ system.adapter.web.0                    : web                   : NUC-ioB                                  -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : NUC-ioB                                  -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : NUC-ioB                                  -  enabled, port: 8086
+ system.adapter.influxdb.2               : influxdb              : NUC-ioB                                  -  enabled, port: 8086
+ system.adapter.influxdb.3               : influxdb              : NUC-ioB                                  -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : NUC-ioB                                  -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : NUC-ioB                                  -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : NUC-ioB                                  -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : NUC-ioB                                  -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.socketio.0               : socketio              : NUC-ioB                                  -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.sun2000.0                : sun2000               : NUC-ioB                                  -  enabled, port: 6607
+ system.adapter.web.0                    : web                   : NUC-ioB                                  -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.6.17   , installed 7.6.17
Adapter    "backitup"     : 3.2.2    , installed 3.2.2
Adapter    "bluelink"     : 3.1.3    , installed 3.1.3
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "ems-esp"      : 6.0.0    , installed 6.0.0
Adapter    "fronius-wattpilot": 4.6.3, installed 4.6.3
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 8.9.2    , installed 8.9.2
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "logparser"    : 2.4.0    , installed 2.4.0
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "mqtt"         : 6.1.2    , installed 6.1.2
Adapter    "node-red"     : 5.2.1    , installed 5.2.1
Adapter    "ocpp"         : 0.12.5   , installed 0.12.5
Adapter    "shelly"       : 10.0.0   , installed 9.5.1  [Updatable]
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "sun2000"      : 1.4.0    , installed 1.4.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.9.64   , installed 2.9.64
Adapter    "vis-icontwo"  : 1.11.0   , installed 1.11.0
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.5
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 2.6.2

Objects and States
Please stand by - This may take a while
Objects:        2932
States:         2457

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://security.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 https://repos.influxdata.com/debian stable InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:7070            0.0.0.0:*               LISTEN      0          21036      700/anydesk
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       23856      826/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       23449      826/iobroker.js-con
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          20996      696/cupsd
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          23722      708/sshd: /usr/sbin
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          15867      1/init
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       25705      1092/io.mqtt.0
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      1001       24779      969/node-red
tcp6       0      0 :::7070                 :::*                    LISTEN      0          21037      700/anydesk
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       25880      1205/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       23894      859/io.admin.0
tcp6       0      0 :::8086                 :::*                    LISTEN      999        23816      773/influxd
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       24353      1172/io.simple-api.
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       24453      1223/io.socketio.0
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          20995      696/cupsd
tcp6       0      0 :::3000                 :::*                    LISTEN      115        21852      825/grafana
tcp6       0      0 :::22                   :::*                    LISTEN      0          23724      708/sshd: /usr/sbin
tcp6       0      0 :::111                  :::*                    LISTEN      0          15868      1/init
udp        0      0 0.0.0.0:45493           0.0.0.0:*                           105        16284      617/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           105        16282      617/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       25004      1111/io.shelly.0
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          12816      1/init
udp        0      0 0.0.0.0:50001           0.0.0.0:*                           0          21095      700/anydesk
udp6       0      0 :::5353                 :::*                                105        16283      617/avahi-daemon: r
udp6       0      0 :::46323                :::*                                105        16285      617/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          13963      1/init
udp6       0      0 fe80::ca5d:455f:a41:546 :::*                                0          39873      647/NetworkManager
udp6       0      0 fe80::a2fe:1fbc:a31:546 :::*                                0          23771      647/NetworkManager

*** Log File - Last 25 Lines ***

2025-07-03 17:27:01.895  - info: host.NUC-ioB instance system.adapter.vis.0 terminated while should be started once
2025-07-03 17:27:03.935  - info: host.NUC-ioB instance system.adapter.web.0 in version "7.0.8" started with pid 1205
2025-07-03 17:27:04.662  - info: web.0 (1205) starting. Version 7.0.8 in /opt/iobroker/node_modules/iobroker.web, node: v20.19.3, js-controller: 7.0.6
2025-07-03 17:27:04.767  - info: web.0 (1205) http server listening on port 8082
2025-07-03 17:27:04.807  - info: web.0 (1205) socket.io server listening on port 8082
2025-07-03 17:27:07.972  - info: host.NUC-ioB instance system.adapter.socketio.0 in version "6.7.1" started with pid 1223
2025-07-03 17:27:08.644  - info: socketio.0 (1223) starting. Version 6.7.1 in /opt/iobroker/node_modules/iobroker.socketio, node: v20.19.3, js-controller: 7.0.6
2025-07-03 17:27:08.675  - info: socketio.0 (1223) socket.io server listening on port 8084
2025-07-03 17:27:11.945  - info: host.NUC-ioB instance system.adapter.fronius-wattpilot.0 in version "4.6.3" started with pid 1238
2025-07-03 17:27:12.599  - info: fronius-wattpilot.0 (1238) starting. Version 4.6.3 in /opt/iobroker/node_modules/iobroker.fronius-wattpilot, node: v20.19.3, js-controller: 7.0.6
2025-07-03 17:27:12.607  - info: fronius-wattpilot.0 (1238) Try to connect to: ws://192.168.0.56/ws
2025-07-03 17:27:14.135  - info: fronius-wattpilot.0 (1238) Connected!
2025-07-03 17:27:37.960  - info: web.0 (1205) ==> Connected system.user.admin from ::ffff:192.168.0.182
2025-07-03 17:27:40.123  - info: web.0 (1205) ==> Connected system.user.admin from ::ffff:192.168.0.182
2025-07-03 17:28:00.291  - info: sun2000.0 (1142) Control: Service queue initialized
2025-07-03 17:28:11.147  - info: mqtt.0 (1092) Client [ESP32Solaranl_SmWLAN] connection closed: timeout
2025-07-03 17:30:08.560  - info: web.0 (1205) <== Disconnect system.user.admin from ::ffff:192.168.0.182 vis.0
2025-07-03 17:30:46.000  - info: mqtt.0 (1092) Client [ESP32Solaranl_SmLAN] reconnected. Old secret 1751556402180_8163. New secret 1751556645999_8153
2025-07-03 17:30:46.018  - info: mqtt.0 (1092) Client [ESP32Solaranl_SmWLAN] connected with secret 1751556646018_7474
2025-07-03 17:30:46.165  - info: mqtt.0 (1092) Client [ESP32Solaranl_SmLAN] subscribes on "mqtt.0.Solaranlage.Sendetakt"
2025-07-03 17:30:46.168  - info: mqtt.0 (1092) Client [ESP32Solaranl_SmWLAN] subscribes on "mqtt.0.Solaranlage.Sendetakt"
2025-07-03 17:30:46.171  - info: mqtt.0 (1092) Client [ESP32Solaranl_SmLAN] subscribes on "mqtt.0.Solaranlage.Sendetakt"
2025-07-03 17:30:46.365  - info: mqtt.0 (1092) Client [ESP32Solaranl_SmLAN] publishOnSubscribe
2025-07-03 17:30:46.369  - info: mqtt.0 (1092) Client [ESP32Solaranl_SmWLAN] publishOnSubscribe
2025-07-03 17:30:46.371  - info: mqtt.0 (1092) Client [ESP32Solaranl_SmLAN] publishOnSubscribe

============ Mark until here for C&P =============

iob diag has finished.

[hub01]

@thomas-braun
Warum hast du nach der Fritzbox gefragt?

[Thomas Braun]

@hub01

Nach der FritzBüchse habe ich gefragt, weil ich da in den letzten Wochen/Monaten Probleme mit der DNS-Auflösung hatte und da diverse Adapter mit TimeOuts reagierten.

[hub01]

@thomas-braun
Sind die DNS-Probleme weg?
Musste man was machen?

[Thomas Braun]

@hub01

Ich fahre auf meiner FritzBox Cable 6660 die aktuelle Labor-Firmware.
Damit sind die Einträge bzgl. Netzwerkprobleme von diversen Adaptern deutlich zurückgegangen.
Nur der parcel-Adapter meldet jetzt noch regelmäßig unregelmäßig Verbindungsprobleme mit DHL.

[hub01]

@thomas-braun
seit 4 Tagen keine Fehlermeldungen mehr vom Wattpilot-Adapter.
Ich denke, das Problem ist gelöst.

Ursache?
Sowohl das Auftreten als auch das Verschwinden der Fehlermeldungen dürften die gemachten Updates gewesen sein.