Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Homoran]

@maxpd hast du multihost?
davon sieht man im iob diag aber nichts.
wie wurde der slave installiert/ konfiguriert?
wo läuft zigbee?

[maxpd]

@homoran nein, nur einen 2. Admin Adapter mit https Zertifikat für Daikin Adapter.

[Homoran]

@maxpd sagte in Zigbee kabelgebundene Geräte reagieren nicht:

nur einen 2. Admin Adapter

never!
du hast 2 Hostnamen

[maxpd]

@homoran wie Multihost funktioniert und was dies bringt weiß ich nicht. Wie der 2. Host da rein und wieder raus kommt ist mir auch unerklärlich ;)

[Asgothian]

@maxpd sagte in Zigbee kabelgebundene Geräte reagieren nicht:

ich ging von dem Zigbee Problem und der Anzeige der empfohlenen nodejs Version aus, die noch 18 ist. Ist vielleicht ein Anzeigefehler im Admin, denn mit deinem Befehl erkennt er die korrekte empfohlene Version.

Da du geschrieben hast das du nichts verändert hast müsste das Problem in Deiner Funkstrecke liegen - ansonsten hätten die Probleme mit dem Update des Systems anfangen müssen.

Allein - glauben mag ich das nicht. Ich bin mir (fast) sicher, das du da doch etwas getan hast.

Bitte installier über den Admin (Expert mode) mal die Version 1.10.3 des Zigbee Adapters.

A.

[maxpd]

@asgothian Die Installation erfolgt bei mir grundsätzlich mit einem Error, unabhängig von der Version.

Installing iobroker.zigbee@1.10.3... (System call)

npm warn deprecated npmlog@4.1.2: This package is no longer supported.

npm warn deprecated are-we-there-yet@1.1.7: This package is no longer supported.

npm warn deprecated gauge@2.7.4: This package is no longer supported.

> usocket@0.3.0 install> node-gyp rebuild

gyp info it worked if it ends with ok

gyp info using node-gyp@7.1.2gyp info using node@20.18.3 | linux | arm64

gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"

gyp ERR! UNCAUGHT EXCEPTION

gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/usocket/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/usocket/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:188:23)gyp ERR! System Linux 6.1.21-v8+gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/usocket/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/usocketgyp ERR! node -v v20.18.3gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.

added 7 packages, removed 16 packages, and changed 4 packages in 23s

Allerdings wird bei mir Version 1.10.3 gar nicht mehr grün und verbleibt in Gelb.

zigbee.0
2025-02-11 21:22:00.375	error	Error herdsman start

zigbee.0
2025-02-11 21:22:00.374	error	Failed to start Zigbee

zigbee.0
2025-02-11 21:22:00.372	error	Starting zigbee-herdsman problem : "Error Resource temporarily unavailable Cannot lock port"

zigbee.0
2025-02-11 21:22:00.157	info	Installed Version: iobroker.zigbee@1.10.3

zigbee.0
2025-02-11 21:22:00.132	info	Starting Zigbee npm ...

zigbee.0
2025-02-11 21:22:00.130	info	Try to reconnect. 1 attempts left

zigbee.0
2025-02-11 21:21:50.125	error	Error herdsman start

zigbee.0
2025-02-11 21:21:50.123	error	Failed to start Zigbee

zigbee.0
2025-02-11 21:21:50.122	error	Starting zigbee-herdsman problem : "Attempt to access memory outside buffer bounds"

zigbee.0
2025-02-11 21:21:49.355	info	Installed Version: iobroker.zigbee@1.10.3

zigbee.0
2025-02-11 21:21:48.882	info	Starting Zigbee npm ...

zigbee.0
2025-02-11 21:21:48.879	info	delete old Backup files. keep only last 10

zigbee.0
2025-02-11 21:21:48.764	info	starting. Version 1.10.3 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.18.3, js-controller: 7.0.6

zigbee.0
2025-02-11 21:21:07.911	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

zigbee.0
2025-02-11 21:21:07.906	info	terminating

zigbee.0
2025-02-11 21:21:07.314	info	Zigbee: disabling joining new devices.

zigbee.0
2025-02-11 21:21:07.311	info	cleaned everything up...

zigbee.0
2025-02-11 21:21:07.309	info	Got terminate signal TERMINATE_YOURSELF

Allerdings steht auch bei der Installation, dass wenn man mal bei Version 1.10.14 war, ein Downgrade nicht mehr möglich ist.

"BREAKING CHANGE. after update to this Version you can't go back to Version <= 1.10.3. Only option is your Backup

Ich bin aber gerade auch auf dieses Topic gestoßen und damit scheinbar gar kein Einzelfall:

https://forum.iobroker.net/topic/79634/zigbee-empfangen-geht-senden-geht-nicht

Dennoch habe ich noch herausgefunden, was ich am System geändert hatte.
Folgende Befehle hatte ich die Tage im Rahmen meiner Bluetooth Odyssee in die Konsole geschickt. Bei den ersten 2 bin ich mir nicht sicher, ob die nicht schon länger her sind:

curl -sL https://deb.nodesource.com/setup_20.x | sudo -E bash -
sudo dpkg --configure -a

sudo apt-get install bluetooth bluez libbluetooth-dev libudev-dev libcap2-bin
sudo setcap cap_net_raw+eip $(eval readlink -f 'which node')
sudo apt-get update
sudo apt-get upgrade -y
sudo apt-get dist-upgrade -y
sudo usermod -G bluetooth -a pd
cat /etc/group | grep bluetooth
sudo systemctl enable hciuart.service
hcitool dev
sudo apt-get install pi-bluetooth
sudo apt-get install bluetooth bluez blueman
sudo rmmod btusb
sudo modprobe btusb
sudo hciconfig hci0 up

Gehen die gesendeten Daten evtl. an den aktivierten hciuart.service? - aber ein Deaktivieren löst das Problem auch nicht.

Und ein bisschen in der Nase hängt mir noch das die Tage gemachte jscontroller update von 7.0.5 auf .6

[arteck]

@maxpd sagte in Zigbee kabelgebundene Geräte reagieren nicht:

Ich bin aber gerade auch auf dieses Topic gestoßen und damit scheinbar gar kein Einzelfall:

doch.... mit so strubbeligen system schon.. das von dir gepostete Thema hat so nix nix mit deinem Problem zu tun

[maxpd]

@arteck Abgesehen von all dem, was dazwischen zu Tage kam 😉 (ein ungewolltes Multihost, falsche empfohlene nodejs Version, bald veraltetes OS) ist das geschilderte Problem, dass meine Geräte nur Daten empfangen, aber nicht senden, aus meiner Perspektive, exakt das Thema aus dem verlinkten Topic? Zumindest das Fehlerbild. Es mögen die Ursachen abweichen.
Auch hier kamen neuerlich das Thema auf: https://github.com/ioBroker/ioBroker.zigbee/issues/2343, https://github.com/ioBroker/ioBroker.zigbee/issues/2306

PS: Ergänzung zu meinem vorherigen Beitrag: Bei der Zigbee Kopplung läuft auch keine Zeit mehr runter (analog dem zuvor verlinkten Topic).

[Homoran]

@maxpd Setz mal ein ganz neues System sauber auf, damit du alle Ungereimtheiten los wirst.
Spiel dein iobroker backup zurück, und wenn du nicht sowieso lieber alles neu Anlernen möchtest auch dein Zigbee backup.

Das ist dich bei einem Raspi überhaupt kein Problem wenn du rine zweite Karte verwendest.

Erst dann kann man einen krummen Unterbau als Ursache wirklich ausschließen.

[maxpd]

Update: Hab zwar noch kein neues System aufgesetzt (hat bei den 4-5x davor nicht problemlos funktioniert | also geht bei mir nicht schnell)

Aber hab das Problem jetzt mal auf die USB Funkmodule einschränken können. Das Homematic Modul direkt auf der Platine aufgesteckt funktioniert weiterhin, aber das Zigbee und 433er Modul an den USB Ports des Pi haben das gleiche Problem. Auch das 433er empfängt, aber sendet nicht.

Gelistet werden sie.

 $ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 152d:0562 JMicron Technology Corp. / JMicron USA Technology Corp. JMS567 SATA 6Gb/s bridge
Bus 001 Device 004: ID 0bda:5411 Realtek Semiconductor Corp. RTS5411 Hub
Bus 001 Device 003: ID 0451:bef3 Texas Instruments, Inc. CC1352R1 Launchpad
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Update 2: Brauche ich eine Netzwerkbrücke wenn ich pivCCU zu iob dazu installiere? Habs jetzt 3x versucht aufzusetzen und immer ist der Pi nach Step8 nicht mehr erreichbar: https://github.com/alexreinert/piVCCU/blob/master/docs/setup/raspberrypi.md

[Thomas Braun]

@maxpd sagte in Zigbee kabelgebundene Geräte reagieren nicht:

Brauche ich eine Netzwerkbrücke wenn ich pivCCU zu iob dazu installiere?

Mach es andersherum. Zuerst pivCCU und dann denn ioBroker dazu.

[maxpd]

@thomas-braun Aber auch dann, mit Step 8 geht SSH kaputt, egal ob hostname oder IP. Die Fritz.Box sagt es wäre weiterhin die gleiche IP. habs auch versucht mit der Vergabe einer festen IP. Ich probiers jetzt ganz ohne Step 8.

[maxpd]

Ich hab nun paar mal iobroker aufgesetzt.
Ganz straight forwars habe ich nur Bookworm mit iobroker drauf gespielt und ein 2 Wochen altes Backup importiert.
Keine CCU installiert und keine Settings auf dem Raspi geändert.
Keine Adapter aktiviert außer Backitup, admin, zigbee und testweise motionblinds
WLAN im Haus testweise deaktiviert.

Aber sowohl Zigbee, als auch der 433er Dongle (motionsblinds) empfangen Daten, senden aber nicht.
Der Dongle ist an einem Hub mit zusätzlicher Stromversorgung.

Auch den USB Hub und den 433er Dongle komplett entfernt bringt nichts.

Einen Hint hat iob diag noch

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyACM0

Aber das sind die zuvor funktionerenden Settings und nur mit ACM0 wird der Adapter grün:

========== Start marking the full check here ===========

```bash
Script v.2025-02-02

*** BASE SYSTEM ***
 Static hostname: donbroker
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.74+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 21:50:51 up 23 min,  2 users,  load average: 0.23, 0.47, 0.54
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Sun 2025-02-16 21:50:52 CET
           Universal time: Sun 2025-02-16 20:50:52 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pd
HOME=/home/pd
GROUPS=pd adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        1.1G        6.7G        1.2M        496M        7.1G
Swap:           536M          0B        536M
Total:          8.7G        1.1G        7.3G

Active iob-Instances:   6

         7809 M total memory
         1024 M used memory
         1039 M active memory
          234 M inactive memory
         6428 M free memory
           55 M buffer memory
          418 M swap cache
          511 M total swap
            0 M used swap
          511 M free swap

*** top - Table Of Processes  ***
top - 21:50:52 up 23 min,  2 users,  load average: 0.23, 0.47, 0.54
Tasks: 177 total,   1 running, 176 sleeping,   0 stopped,   0 zombie
%Cpu(s): 20.0 us,  0.0 sy,  0.0 ni, 80.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7809.9 total,   6427.4 free,   1024.9 used,    474.2 buff/cache
MiB Swap:    512.0 total,    512.0 free,      0.0 used.   6785.0 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     781M  1.2M  780M   1% /run
/dev/mmcblk0p2 ext4       29G  7.3G   21G  27% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   55M  456M  11% /boot/firmware
tmpfs          tmpfs     781M     0  781M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Feb 16 21:27:44 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:57:31:D7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=c624a46e-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sun Feb 16 21:28:01 2025] EXT4-fs (mmcblk0p2): mounted filesystem ce208fd3-38a8-424a-87a2-cd44114eb820 ro with ordered data mode. Quota mode: none.
[Sun Feb 16 21:28:02 2025] EXT4-fs (mmcblk0p2): re-mounted ce208fd3-38a8-424a-87a2-cd44114eb820 r/w. Quota mode: none.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
945M    /var/
205M    /var/cache
200M    /var/cache/apt
168M    /var/lib
135M    /var/lib/apt/lists

Archived and active journals take up 60.0M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.1G    /opt/iobroker/iobroker-data/files
1.1G    /opt/iobroker/iobroker-data/
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
50M     /opt/iobroker/iobroker-data/objects.jsonl
38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
26M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100F9Y-if03
/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100F9Y-if00

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyACM0

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.3
/usr/bin/node           v20.18.3
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.30.0

nodejs:
  Installed: 20.18.3-1nodesource1
  Candidate: 20.18.3-1nodesource1
  Version table:
 *** 20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
donbroker           donbroker (version: 7.0.6, hostname: donbroker     , alive, uptime: 1374)

Core adapters versions
js-controller:  7.0.6
admin:          7.4.10
javascript:     8.8.3

nodejs modules from github:     5
+-- iobroker.google-sharedlocations@2.2.1 (git+ssh://git@github.com/Garfonso/ioBroker.google-sharedlocations.git#0db73d57d00aa5dff22ff22e853f1231ce141dc1)
+-- iobroker.govee-app@0.0.6 (git+ssh://git@github.com/TA2k/ioBroker.govee-app.git#6a0f84cfb34eb3a0ca647c7a519b9d5a48ccfb85)
+-- iobroker.govee@0.0.6 (git+ssh://git@github.com/nbuenger/ioBroker.govee.git#73ec80b6350890015d95428dd3bbd3f72417a073)
+-- iobroker.motionblinds@0.3.0 (git+ssh://git@github.com/VBen/ioBroker.motionblinds.git#0967a7b127274ef06e0327585267c313339b3b10)
| +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0)

Adapter State
+ system.adapter.admin.0                  : admin                 : donbroker                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.admin.1                  : admin                 : donbroker                                -  enabled, port: 8083, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.alias-manager.0          : alias-manager         : donbroker                                - disabled
+ system.adapter.backitup.0               : backitup              : donbroker                                -  enabled
  system.adapter.ble.0                    : ble                   : donbroker                                - disabled
  system.adapter.chromecast.0             : chromecast            : donbroker                                - disabled
  system.adapter.cloud.0                  : cloud                 : donbroker                                - disabled
  system.adapter.coronavirus-statistics.0 : coronavirus-statistics: donbroker                                - disabled
  system.adapter.daikin-cloud.0           : daikin-cloud          : donbroker                                - disabled
  system.adapter.daikin.0                 : daikin                : donbroker                                - disabled
  system.adapter.daswetter.0              : daswetter             : donbroker                                - disabled
  system.adapter.denon.0                  : denon                 : donbroker                                - disabled
  system.adapter.discovery.0              : discovery             : donbroker                                - disabled
  system.adapter.doorbird.0               : doorbird              : donbroker                                - disabled
  system.adapter.echarts.0                : echarts               : donbroker                                - disabled
  system.adapter.feiertage.0              : feiertage             : donbroker                                - disabled
  system.adapter.flot.0                   : flot                  : donbroker                                - disabled
  system.adapter.go-e.0                   : go-e                  : donbroker                                - disabled
  system.adapter.google-sharedlocations.0 : google-sharedlocations: donbroker                                - disabled
  system.adapter.govee-app.0              : govee-app             : donbroker                                - disabled
  system.adapter.govee-local.0            : govee-local           : donbroker                                - disabled
  system.adapter.govee.0                  : govee                 : donbroker                                - disabled
  system.adapter.hass.0                   : hass                  : donbroker                                - disabled, port: 8123
  system.adapter.history.0                : history               : donbroker                                - disabled
  system.adapter.hm-rega.0                : hm-rega               : donbroker                                - disabled
  system.adapter.hm-rpc.0                 : hm-rpc                : donbroker                                - disabled, port: 0
  system.adapter.hm-rpc.1                 : hm-rpc                : donbroker                                - disabled, port: 0
  system.adapter.ical.0                   : ical                  : donbroker                                - disabled
  system.adapter.info.0                   : info                  : donbroker                                - disabled
  system.adapter.iot.0                    : iot                   : donbroker                                - disabled
  system.adapter.javascript.0             : javascript            : donbroker                                - disabled
  system.adapter.lgtv.0                   : lgtv                  : donbroker                                - disabled
  system.adapter.lovelace.0               : lovelace              : donbroker                                - disabled, port: 8091, bind: 0.0.0.0, run as: admin
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : donbroker                                - disabled, port: 54321
  system.adapter.modbus.0                 : modbus                : donbroker                                - disabled
  system.adapter.modbus.1                 : modbus                : donbroker                                - disabled
  system.adapter.modbus.2                 : modbus                : donbroker                                - disabled
  system.adapter.motionblinds.0           : motionblinds          : donbroker                                - disabled
  system.adapter.mqtt-client.0            : mqtt-client           : donbroker                                - disabled, port: 1884
  system.adapter.mqtt.0                   : mqtt                  : donbroker                                - disabled, port: 36669, bind: 192.168.178.30
+ system.adapter.net-tools.0              : net-tools             : donbroker                                -  enabled
  system.adapter.ping.0                   : ping                  : donbroker                                - disabled
  system.adapter.pollenflug.0             : pollenflug            : donbroker                                - disabled
  system.adapter.pvforecast.0             : pvforecast            : donbroker                                - disabled
  system.adapter.pvforecast.1             : pvforecast            : donbroker                                - disabled
  system.adapter.pvforecast.2             : pvforecast            : donbroker                                - disabled
  system.adapter.radar2.0                 : radar2                : donbroker                                - disabled
  system.adapter.roborock.0               : roborock              : donbroker                                - disabled
  system.adapter.rpi2.0                   : rpi2                  : donbroker                                - disabled
  system.adapter.sayit.0                  : sayit                 : donbroker                                - disabled
  system.adapter.sayit.1                  : sayit                 : donbroker                                - disabled
  system.adapter.sayit.2                  : sayit                 : donbroker                                - disabled
  system.adapter.sayit.3                  : sayit                 : donbroker                                - disabled
  system.adapter.sayit.4                  : sayit                 : donbroker                                - disabled
  system.adapter.schoolfree.0             : schoolfree            : donbroker                                - disabled
  system.adapter.shelly.0                 : shelly                : donbroker                                - disabled, port: 1882, bind: 0.0.0.0
  system.adapter.shelly.1                 : shelly                : donbroker                                - disabled, port: 1882, bind: 0.0.0.0
  system.adapter.shuttercontrol.0         : shuttercontrol        : donbroker                                - disabled
  system.adapter.simple-api.0             : simple-api            : donbroker                                - disabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.simple-api.1             : simple-api            : donbroker                                - disabled, port: 8101, bind: 0.0.0.0, run as: admin
  system.adapter.sma-em.0                 : sma-em                : donbroker                                - disabled
  system.adapter.sonoff.0                 : sonoff                : donbroker                                - disabled, port: 1883, bind: 0.0.0.0
  system.adapter.spotify-premium.0        : spotify-premium       : donbroker                                - disabled
  system.adapter.synology.0               : synology              : donbroker                                - disabled, port: 5000
  system.adapter.synology.1               : synology              : donbroker                                - disabled, port: 5001
  system.adapter.systeminfo.0             : systeminfo            : donbroker                                - disabled
  system.adapter.telegram.0               : telegram              : donbroker                                - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.telegram.1               : telegram              : donbroker                                - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.telegram.2               : telegram              : donbroker                                - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.terminal.0               : terminal              : donbroker                                - disabled, port: 8088, bind: 0.0.0.0, run as: admin
  system.adapter.tr-064.0                 : tr-064                : donbroker                                - disabled
  system.adapter.tuya.0                   : tuya                  : donbroker                                - disabled
  system.adapter.web.0                    : web                   : donbroker                                - disabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : donbroker                                - disabled
  system.adapter.wifilight.0              : wifilight             : donbroker                                - disabled
  system.adapter.wled.0                   : wled                  : donbroker                                - disabled
  system.adapter.yeelight-2.0             : yeelight-2            : donbroker                                - disabled
+ system.adapter.zigbee.0                 : zigbee                : donbroker                                -  enabled, port: /dev/ttyACM0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : donbroker                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.admin.1                  : admin                 : donbroker                                -  enabled, port: 8083, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.zigbee.0                 : zigbee                : donbroker                                -  enabled, port: /dev/ttyACM0

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Instances
Used repository: stable
Cannot read or parse /opt/iobroker/node_modules/@iobroker/js-controller-common-db/build/esm/lib/common//../node_modules/iobroker.socketio/io-package.json: /opt/iobroker/node_modules/iobroker.socketio/io-package.json: Unexpected token '', ""... is not valid JSON
Cannot read or parse /opt/iobroker/node_modules/@iobroker/js-controller-common-db/build/esm/lib/common//../node_modules/iobroker.web/io-package.json: /opt/iobroker/node_modules/iobroker.web/package.json: Unexpected end of JSON input
Cannot read or parse /opt/iobroker/node_modules/@iobroker/js-controller-common-db/build/esm/lib/common//../node_modules/iobroker.ws/io-package.json: /opt/iobroker/node_modules/iobroker.ws/io-package.json: Unexpected token '', ""... is not valid JSON
Cannot read or parse /opt/iobroker/node_modules/@iobroker/js-controller-common-db/build/esm/lib/common//../node_modules/iobroker.socketio/io-package.json: /opt/iobroker/node_modules/iobroker.socketio/io-package.json: Unexpected token '', ""... is not valid JSON
Cannot read or parse /opt/iobroker/node_modules/@iobroker/js-controller-common-db/build/esm/lib/common//../node_modules/iobroker.web/io-package.json: /opt/iobroker/node_modules/iobroker.web/package.json: Unexpected end of JSON input
Cannot read or parse /opt/iobroker/node_modules/@iobroker/js-controller-common-db/build/esm/lib/common//../node_modules/iobroker.ws/io-package.json: /opt/iobroker/node_modules/iobroker.ws/io-package.json: Unexpected token '', ""... is not valid JSON
Adapter    "admin"        : 7.4.10   , installed 7.4.10
Adapter    "alias-manager": 2.0.0    , installed 2.0.0
Adapter    "backitup"     : 3.0.31   , installed 3.0.25 [Updatable]
Adapter    "ble"          : 0.14.0   , installed 0.14.0
Adapter    "chromecast"   : 4.0.0    , installed 4.0.0
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "coronavirus-statistics": 0.9.0, installed 0.9.0
Adapter    "daikin"       : 1.4.2    , installed 1.4.2
Adapter    "daikin-cloud" : 0.4.11   , installed 0.4.11
Adapter    "daswetter"    : 3.2.2    , installed 3.2.2
Adapter    "denon"        : 1.15.12  , installed 1.15.12
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "doorbird"     : 2.0.0    , installed 2.0.0
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "feiertage"    : 1.2.1    , installed 1.2.1
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "go-e"         : 1.0.41   , installed 1.0.41
Adapter    "govee-local"  : 0.2.7    , installed 0.2.7
Adapter    "hass"         : 1.4.0    , installed 1.4.0
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hm-rega"      : 5.1.0    , installed 5.1.0
Adapter    "hm-rpc"       : 2.0.2    , installed 2.0.2
Adapter    "ical"         : 1.16.1   , installed 1.16.1
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "lgtv"         : 2.4.0    , installed 2.3.1  [Updatable]
Adapter    "lovelace"     : 4.1.10   , installed 4.1.10
Adapter    "mihome-vacuum": 4.2.0    , installed 4.2.0
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "mqtt"         : 6.1.2    , installed 6.1.2
Adapter    "mqtt-client"  : 2.1.0    , installed 2.1.0
Adapter    "net-tools"    : 1.0.11   , installed 1.1.0
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pollenflug"   : 2.0.0    , installed 2.0.0
Adapter    "pvforecast"   : 4.1.0    , installed 4.1.0
Adapter    "radar2"       : 2.2.0    , installed 2.2.0
Adapter    "roborock"     : 0.6.18   , installed 0.6.18
Adapter    "rpi2"         : 2.3.1    , installed 2.3.1
Adapter    "sayit"        : 5.0.0    , installed 3.0.0  [Updatable]
Adapter    "schoolfree"   : 1.1.7    , installed 1.1.6  [Updatable]
Adapter    "shelly"       : 8.5.1    , installed 8.2.1  [Updatable]
Adapter    "shuttercontrol": 1.8.5   , installed 1.8.5
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "sma-em"       : 1.2.0    , installed 1.1.0  [Updatable]
Adapter    "sonoff"       : 3.1.2    , installed 3.1.2
Adapter    "spotify-premium": 1.5.2  , installed 1.5.0  [Updatable]
Adapter    "synology"     : 3.1.0    , installed 3.1.0
Adapter    "systeminfo"   : 1.2.0    , installed 1.2.0
Adapter    "telegram"     : 4.0.0    , installed 3.9.0  [Updatable]
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "tuya"         : 3.16.0   , installed 3.16.0
Adapter    "whatsapp-cmb" : 0.3.0    , installed 0.3.0
Adapter    "wifilight"    : 1.2.2    , installed 1.2.2
Adapter    "wled"         : 0.7.2    , installed 0.7.2
Adapter    "yeelight-2"   : 1.4.0    , installed 1.4.0
Adapter    "zigbee"       : 1.10.14  , installed 1.10.13 [Updatable]

Objects and States
Please stand by - This may take a while
Objects:        25451
States:         20577

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          2860       590/sshd: /usr/sbin
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       5514       581/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       5519       581/iobroker.js-con
tcp6       0      0 :::22                   :::*                    LISTEN      0          2862       590/sshd: /usr/sbin
tcp6       0      0 :::8083                 :::*                    LISTEN      1001       4995       782/io.admin.1
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       5716       771/io.admin.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        4084       455/avahi-daemon: r
udp        0      0 0.0.0.0:52282           0.0.0.0:*                           104        4086       455/avahi-daemon: r
udp6       0      0 fe80::64f4:522f:5b9:546 :::*                                0          6208       531/NetworkManager
udp6       0      0 :::5353                 :::*                                104        4085       455/avahi-daemon: r
udp6       0      0 :::60256                :::*                                104        4087       455/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-02-16 21:43:46.318  - info: zigbee.0 (1121) 0x54ef4410000c1ed5 (addr 61170): GZCGQ01LM - Xiaomi Mi light sensor (EndDevice)
2025-02-16 21:43:46.319  - info: zigbee.0 (1121) 0x54ef4410000c298d (addr 58684): GZCGQ01LM - Xiaomi Mi light sensor (EndDevice)
2025-02-16 21:43:46.320  - info: zigbee.0 (1121) 0x7cb03eaa0a0c1130 (addr 24831): AB3257001NJ - OSRAM Smart+ plug (Router)
2025-02-16 21:43:46.322  - info: zigbee.0 (1121) 0x00158d0004910d68 (addr 30987): MCCGQ01LM - Xiaomi Mi door and window sensor (EndDevice)
2025-02-16 21:43:46.323  - info: zigbee.0 (1121) 0x00158d0006ba82be (addr 56203): RTCGQ11LM - Aqara Motion sensor (EndDevice)
2025-02-16 21:43:46.324  - info: zigbee.0 (1121) 0x00158d000809443c (addr 50143): WXKG11LM - Aqara Wireless mini switch (EndDevice)
2025-02-16 21:43:46.325  - info: zigbee.0 (1121) 0x00158d0003232318 (addr 35648): DJT11LM - Aqara Vibration sensor (EndDevice)
2025-02-16 21:43:46.326  - info: zigbee.0 (1121) 0x842e14fffe0f530f (addr 22943): MS-SP-LE27WRGB - Mycket E27 RGBW bulb (Router)
2025-02-16 21:43:46.327  - info: zigbee.0 (1121) 0xa4c1381d064246ab (addr 38128): RSH-HS06_1 - Tuya Temperature & humidity sensor (EndDevice)
2025-02-16 21:43:46.328  - info: zigbee.0 (1121) 0x00158d000af2de24 (addr 59952): RTCGQ11LM - Aqara Motion sensor (EndDevice)
2025-02-16 21:43:46.330  - info: zigbee.0 (1121) 0x842e14fffe0f5322 (addr 62047): MS-SP-LE27WRGB - Mycket E27 RGBW bulb (Router)
2025-02-16 21:43:46.331  - info: zigbee.0 (1121) 0x842e14fffe0f5318 (addr 2296): MS-SP-LE27WRGB - Mycket E27 RGBW bulb (Router)
2025-02-16 21:43:46.332  - info: zigbee.0 (1121) Zigbee started
2025-02-16 21:43:46.611  - info: zigbee.0 (1121) debug devices set to []
2025-02-16 21:43:50.935  - info: admin.0 (771) ==> Connected system.user.admin from ::ffff:192.168.178.130
2025-02-16 21:43:51.263  - info: zigbee.0 (1121) List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100F9Y","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100F9Y-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100F9Y","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100F9Y-if03","vendorId":"0451","productId":"bef3"}]
2025-02-16 21:43:53.979  - info: zigbee.0 (1121) Zigbee: allowing new devices to join.
2025-02-16 21:44:12.549  - info: admin.0 (771) <== Disconnect system.user.admin from ::ffff:192.168.178.130
2025-02-16 21:44:44.566  - info: host.donbroker "system.adapter.net-tools.0" enabled
2025-02-16 21:44:46.388  - info: host.donbroker instance system.adapter.net-tools.0 in version "1.1.0" started with pid 1140
2025-02-16 21:44:48.835  - info: net-tools.0 (1140) starting. Version 1.1.0 in /opt/iobroker/node_modules/iobroker.net-tools, node: v20.18.3, js-controller: 7.0.6
2025-02-16 21:44:48.895  - error: net-tools.0 (1140) License Key is not set! Enter a valid license key in the adapter settings.
2025-02-16 21:45:03.760  - info: admin.0 (771) ==> Connected system.user.admin from ::ffff:192.168.178.130
2025-02-16 21:45:04.073  - info: zigbee.0 (1121) List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100F9Y","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100F9Y-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100F9Y","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100F9Y-if03","vendorId":"0451","productId":"bef3"}]
2025-02-16 21:45:06.639  - info: zigbee.0 (1121) Zigbee: allowing new devices to join.

============ Mark until here for C&P =============

[Meister Mopper]

@maxpd sagte in Zigbee kabelgebundene Geräte reagieren nicht:

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100F9Y-if00

Was passiert, wenn du /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100F9Y-if00 einträgst?

[maxpd]

@meister-mopper said in Zigbee kabelgebundene Geräte reagieren nicht:

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.25__Embed_with_CMSIS-DAP_L1100F9Y-if00

Bleibt alles beim gleichen. Empfangen der Daten,ja, aber kein Senden.

[Homoran]

@maxpd sagte in Zigbee kabelgebundene Geräte reagieren nicht:

und ein 2 Wochen altes Backup importiert.

und wenn du kein backup nimmst und nur zigbee neu installierst?

[maxpd]

@homoran Dann zählt der Kopplungsmodus runter, ich kann ein Gerät anlernen und steuern.

Wenn ich nun hingehe und spiele ein Backup ein, funktioniert es wieder nicht.
Installier ich eine 2. Instanz, stoppe die 1. und lerne ein Gerät in der 2. Instanz geht diese.
Stoppe ich nun die 2. Instanz wieder und starte die 1. Instanz, kann ich dieses eine Gerät in der 1. Instanz ebenfalls nutzen.:dizzy_face:
Als könne er nur 1 Datenbank mit 2 Instanzen nutzen?

PS: Problem des 433er Dongles gelöst. Im Token fehlte 1 Buchstabe - was lustig ist, dass er trotzdem Daten empfängt aber nicht sendet.

[Homoran]

@maxpd sagte in Zigbee kabelgebundene Geräte reagieren nicht:

Wenn ich nun hingehe und spiele ein Backup ein, funktioniert es wieder nicht.

dann ist schon das Backup defekt

[maxpd]

@homoran das Problem besteht seit bisschen mehr als einer Woche. ich habe das Backup von vor 2 Monaten getestet. mit der 1.13er Version, weil alte Datenbank.

8,1kb hat das Backup mit ca. 50 devices

aber auch das einspielen von anderen Backup Zeitpunkten aktualisiert die devices im Adapter nicht richtig, wenn schon einmal ein Backup eingespielt wurde. zumindest haben devices dann keine Namen mehr. dann lösche ich den Adapter nochmal komplett ein zwei Mal, bis es sauber aussieht

[maxpd]

Habe mal Einträge in der shepard.db verglichen.
Es gibt Abweichungen zwischen den Koordinatoren und Devices. Muss da etwas konvertiert werden für die 1.10.14? Bin immernoch der Meinung, dass der Fehler ab dem Update stattfand.

{"id":1,"type":"Coordinator","ieeeAddr":"0x00125b001caa68bd","nwkAddr":0,"manufId":7,"epList":[1,2,3,4,5,6,8,10,11,12,13,47,110,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"2":{"profId":257,"epId":2,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"3":{"profId":260,"epId":3,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"4":{"profId":263,"epId":4,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"5":{"profId":264,"epId":5,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"6":{"profId":265,"epId":6,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"8":{"profId":260,"epId":8,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"10":{"profId":260,"epId":10,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"11":{"profId":260,"epId":11,"devId":1024,"inClusterList":[1281,10],"outClusterList":[1280,1282],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"12":{"profId":49246,"epId":12,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"13":{"profId":260,"epId":13,"devId":5,"inClusterList":[25],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"47":{"profId":260,"epId":47,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"110":{"profId":260,"epId":110,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}},"242":{"profId":41440,"epId":242,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"interviewCompleted":true,"meta":{}}
{"id":1,"type":"Coordinator","ieeeAddr":"0x00125b001caa68bd","nwkAddr":0,"manufId":0,"epList":[1,2,3,4,5,6,8,11,12,13,47,110,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[]},"2":{"profId":257,"epId":2,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[]},"3":{"profId":261,"epId":3,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[]},"4":{"profId":263,"epId":4,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[]},"5":{"profId":264,"epId":5,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[]},"6":{"profId":265,"epId":6,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[]},"8":{"profId":260,"epId":8,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[]},"11":{"profId":260,"epId":11,"devId":1024,"inClusterList":[],"outClusterList":[1280,1282],"clusters":{},"binds":[]},"12":{"profId":49246,"epId":12,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[]},"13":{"profId":260,"epId":13,"devId":5,"inClusterList":[25],"outClusterList":[],"clusters":{},"binds":[]},"47":{"profId":260,"epId":47,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[]},"110":{"profId":260,"epId":110,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[]},"242":{"profId":41440,"epId":242,"devId":5,"inClusterList":[],"outClusterList":[],"clusters":{},"binds":[]}},"interviewCompleted":true,"meta":{},"lastSeen":null}

{"id":2,"type":"Router","ieeeAddr":"0xf0d1b90000133dd6","nwkAddr":7187,"manufId":4489,"manufName":"LEDVANCE","powerSource":"Mains (single phase)","modelId":"Plug Z3","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":266,"inClusterList":[0,3,4,5,6,2821,4096,64527],"outClusterList":[25],"clusters":{"genBasic":{"attributes":{"modelId":"Plug Z3","manufacturerName":"LEDVANCE","powerSource":1,"zclVersion":2,"appVersion":1,"stackVersion":2,"hwVersion":1,"dateCode":"Dec 10 2018\u0000\u0000\u0000\u0000\u0000","swBuildId":"00103101"}},"genOnOff":{"attributes":{"onOff":0}}},"binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00125b001caa68bd","endpointID":1}],"configuredReportings":[{"cluster":6,"attrId":0,"minRepIntval":0,"maxRepIntval":65000,"repChange":1}],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":1,"stackVersion":2,"hwVersion":1,"dateCode":"Dec 10 2018\u0000\u0000\u0000\u0000\u0000","swBuildId":"00103101","zclVersion":2,"interviewCompleted":true,"meta":{"configured":332242049},"lastSeen":1739910187827}
{"id":2,"type":"Router","ieeeAddr":"0xf0d1b90000133dd6","nwkAddr":5954,"manufId":4489,"manufName":"LEDVANCE","powerSource":"Mains (single phase)","modelId":"Plug Z3","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":266,"inClusterList":[0,3,4,5,6,2821,4096,64527],"outClusterList":[25],"clusters":{"genBasic":{"attributes":{"modelId":"Plug Z3","manufacturerName":"LEDVANCE","powerSource":1,"zclVersion":2,"appVersion":1,"stackVersion":2,"hwVersion":1,"dateCode":"Dec 10 2018\u0000\u0000\u0000\u0000\u0000","swBuildId":"00103101"}},"genOnOff":{"attributes":{"onOff":0}}},"binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00125b001caa68bd","endpointID":1}],"configuredReportings":[],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":1,"stackVersion":2,"hwVersion":1,"dateCode":"Dec 10 2018\u0000\u0000\u0000\u0000\u0000","swBuildId":"00103101","zclVersion":2,"interviewCompleted":true,"meta":{"configured":1},"lastSeen":1739816777097}

Mit kopieren der shepard.db in die neue Instanz geht diese wieder nicht.
Kopiere ich die neuen Zeilen des Koordinators und des Devices in die alte Datenbank, lässt sich das Device aber trotzdem nicht mehr steuern.