Test Adapter tvprogram

[Tino 0]

@oliverio sagte in Test Adapter tvprogram:

@tino-0

Das sieht sehr gut aus.
Ich denke, ich könnte da schon einen konfigurierbare Option in den Adapter Einstellungen berücksichtigen.
Bin nun auch wieder in der Nähe meiner repos.
Mal schauen wann ich das einbaue. Kann aber kurzfristig erfolgen.

Super

[OliverIO]

@tino-0
kannst du mir bitte die logo datei zur Verfügung stellen?

[Tino 0]

@oliverio sagte in Test Adapter tvprogram:

@tino-0
kannst du mir bitte die logo datei zur Verfügung stellen?

hier die Logos, es sind 2 Größen 400x240 und 400x160, ich benutze die 400x160 in den Abmessungen 100x40px beim Control und 125x50px in der Tabelle.

Spoiler

tv_logos.zip

CSS Einträge generell oder für nur ein Widget

.channel {
    width: 125px !important;
    height: 50px !important;
}

#w00376 .channel {
    width: 100px !important;
    height: 40px !important;
}

Gruß Tino

[OliverIO]

Neue Version 2.3.1

• Neuer Datenpunkt für alternative Kanal-Logos
• Anpassung der Logik in den widgets damit der Datenpunkt berücksichtigt wird
• Hinzufügen eines Beispiels in der Readme. Das Beispiel enthält ein Kopierskript, das auch mit anderen Icon-Sets von VUPlus (und scheinbar auch andere Systeme) verwendet werden kann.
• Aktualisierung Readme und Lizenz mit Jahr 2025

Wenn jemand Probleme entdeckt oder Unverständlichkeiten bei der Anwendung dann gerne hier posten.

[sigi234]

@oliverio sagte in Test Adapter tvprogram:

Wenn jemand Probleme entdeckt oder Unverständlichkeiten bei der Anwendung dann gerne hier posten.

Und wo kann man das einstellen?

@oliverio sagte in Test Adapter tvprogram:

Neuer Datenpunkt für alternative Kanal-Logos

Nicht vorhanden

[Tino 0]

Hallo,

@oliverio sagte in Test Adapter tvprogram:

Neue Version 2.3.1
Wenn jemand Probleme entdeckt oder Unverständlichkeiten bei der Anwendung dann gerne hier posten.

Bei mir hat sich nur der Admin Teil aktualisiert, dass Widget selbst nicht.

Gruß Tino

[OliverIO]

@sigi234

Ah ja, ich muss die datenpunkt Erzeugung überarbeiten.
Wenn es bspw tv1 gibt werden die darunterliegenden nicht überprüft.

Also einfach die datenpunkte löschen und den Adapter neu starten, dann müsste er erzeugt werden.

[OliverIO]

@tino-0

Das passiert leider bei allen Adaptern immer wieder mal.
Dann bitte auf der Konsole

Iob upload tvprogram

Ausführen und im browser den Cache löschen

[OliverIO]

Neue Version 3.0.0

• Die Erstellung der Datenpunkte wurde überarbeitet
• Die einzelnen TVs werden nun als Devices angelegt
• zur Sicherheit sollten die Datenpunkte zuvor durch den Nutzer gelöscht werden.

[Tino 0]

@oliverio
bei mir funktioniert es, im Menü sind aber die alten Logos noch drin

[sigi234]

@oliverio sagte in Test Adapter tvprogram:

Neue Version 3.0.0

Bei mir werden keine DP mehr angelegt.

DP vorher gelöscht, Browser Cache geleert, Upload gemacht

tvprogram.0
2025-01-02 17:23:51.336	debug	The file program/2025-01-07.json has been saved!

tvprogram.0
2025-01-02 17:23:51.311	debug	getData first request or changed data events 2025-01-07

tvprogram.0
2025-01-02 17:23:50.846	debug	The file program/2025-01-06.json has been saved!

tvprogram.0
2025-01-02 17:23:50.818	debug	getData first request or changed data events 2025-01-06

tvprogram.0
2025-01-02 17:23:50.346	debug	The file program/2025-01-05.json has been saved!

tvprogram.0
2025-01-02 17:23:50.335	debug	getData first request or changed data events 2025-01-05

tvprogram.0
2025-01-02 17:23:49.843	debug	The file program/2025-01-04.json has been saved!

tvprogram.0
2025-01-02 17:23:49.832	debug	getData first request or changed data events 2025-01-04

tvprogram.0
2025-01-02 17:23:49.352	debug	The file program/2025-01-03.json has been saved!

tvprogram.0
2025-01-02 17:23:49.324	debug	getData first request or changed data events 2025-01-03

tvprogram.0
2025-01-02 17:23:48.881	debug	The file program/2025-01-02.json has been saved!

tvprogram.0
2025-01-02 17:23:48.870	debug	getData first request or changed data events 2025-01-02

tvprogram.0
2025-01-02 17:23:48.414	debug	The file program/2025-01-01.json has been saved!

tvprogram.0
2025-01-02 17:23:48.403	debug	getData first request or changed data events 2025-01-01

tvprogram.0
2025-01-02 17:23:47.960	debug	The file program/2024-12-31.json has been saved!

tvprogram.0
2025-01-02 17:23:47.949	debug	getData first request or changed data events 2024-12-31

tvprogram.0
2025-01-02 17:23:47.527	debug	The file program/2024-12-30.json has been saved!

tvprogram.0
2025-01-02 17:23:47.517	debug	getData first request or changed data events 2024-12-30

tvprogram.0
2025-01-02 17:23:47.074	debug	The file program/2024-12-29.json has been saved!

tvprogram.0
2025-01-02 17:23:47.063	debug	getData first request or changed data events 2024-12-29

tvprogram.0
2025-01-02 17:23:46.618	debug	The file program/2024-12-28.json has been saved!

tvprogram.0
2025-01-02 17:23:46.604	debug	getData first request or changed data events 2024-12-28

tvprogram.0
2025-01-02 17:23:46.061	debug	The file genres.json has been saved!

tvprogram.0
2025-01-02 17:23:46.059	debug	getData first request or changed data genres

tvprogram.0
2025-01-02 17:23:45.746	debug	The file channels.json has been saved!

tvprogram.0
2025-01-02 17:23:45.744	debug	getData first request or changed data channels

tvprogram.0
2025-01-02 17:23:45.449	debug	The file categories.json has been saved!

tvprogram.0
2025-01-02 17:23:45.439	debug	getData first request or changed data categories

tvprogram.0
2025-01-02 17:23:45.030	debug	state tvprogram.0.info.connection changed: true (ack = true)

tvprogram.0
2025-01-02 17:23:45.030	debug	state tvprogram.0.info.connection changed: true (ack = true)

tvprogram.0
2025-01-02 17:23:44.918	debug	setState name: info.connection

tvprogram.0
2025-01-02 17:23:44.917	debug	setState connection

tvprogram.0
2025-01-02 17:23:44.916	debug	main onReady open tvprogramm

tvprogram.0
2025-01-02 17:23:44.907	info	starting. Version 3.0.0 in C:/SmartHome/node_modules/iobroker.tvprogram, node: v20.18.1, js-controller: 7.0.6

tvprogram.0
2025-01-02 17:23:40.309	info	terminating

tvprogram.0
2025-01-02 17:23:39.795	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

tvprogram.0
2025-01-02 17:23:39.795	info	terminating

tvprogram.0
2025-01-02 17:23:39.794	debug	main onUnload error

tvprogram.0
2025-01-02 17:23:39.794	debug	main onUnload try

tvprogram.0
2025-01-02 17:23:39.793	info	Got terminate signal TERMINATE_YOURSELF

[OliverIO]

Neue Version 3.0.2

• den channel select dialog habe ich repariert
• die debug messages wurden ebenfalls etwas verbessert

@sigi234 kannst du bitte mit dieser version einen clean install bitte machen, also alten adapter deinstallieren und neu installieren. wenn es nicht funktioniert, dann bitte alle debug meldungen des adapters hier bitte posten.
ich habe diverse dinge probiert, aber das es gar nicht funktioniert hatte ich nicht. der adapter müsste folgendes abdecken:

• nur ein gerät löschen/neu anlegen
• einzelnen datenpunkt gelöscht und neu anlegen

[Tino 0]

@oliverio

ich habe den Adapter und komplett neu gemacht, jetzt sind bei jedem Restart des Adapter alle Datenpunkte leer auch der channelfilter

[sigi234]

@tino-0 sagte in Test Adapter tvprogram:

@oliverio

ich habe den Adapter und komplett neu gemacht, jetzt sind bei jedem Restart des Adapter alle Datenpunkte leer auch der channelfilter

Jupp, auch bei mir. Sonst Ok

tvprogram.0
2025-01-02 20:02:33.535	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:33.535	debug	doStateChange

tvprogram.0
2025-01-02 20:02:33.535	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:33.534	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:33.534	debug	doStateChange

tvprogram.0
2025-01-02 20:02:33.533	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:33.527	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:33.527	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:33.527	debug	doStateChange

tvprogram.0
2025-01-02 20:02:33.527	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-07 (ack = true)

tvprogram.0
2025-01-02 20:02:33.526	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:33.526	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:33.526	debug	doStateChange

tvprogram.0
2025-01-02 20:02:33.526	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-07 (ack = true)

tvprogram.0
2025-01-02 20:02:33.523	debug	The file program/2025-01-07.json has been saved!

tvprogram.0
2025-01-02 20:02:33.518	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:33.518	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:33.509	debug	getDataAsync first request or changed data events 2025-01-07

tvprogram.0
2025-01-02 20:02:33.072	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:33.072	debug	doStateChange

tvprogram.0
2025-01-02 20:02:33.071	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:33.070	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:33.070	debug	doStateChange

tvprogram.0
2025-01-02 20:02:33.070	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:33.066	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:33.066	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:33.066	debug	doStateChange

tvprogram.0
2025-01-02 20:02:33.065	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-06 (ack = true)

tvprogram.0
2025-01-02 20:02:33.065	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:33.065	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:33.065	debug	doStateChange

tvprogram.0
2025-01-02 20:02:33.064	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-06 (ack = true)

tvprogram.0
2025-01-02 20:02:33.063	debug	The file program/2025-01-06.json has been saved!

tvprogram.0
2025-01-02 20:02:33.059	debug	getProgramAsync

tvprogram.0
2025-01-02 20:02:33.059	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:33.059	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:33.048	debug	getDataAsync first request or changed data events 2025-01-06

tvprogram.0
2025-01-02 20:02:32.551	debug	The file program/2025-01-05.json has been saved!

tvprogram.0
2025-01-02 20:02:32.536	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:32.536	debug	doStateChange

tvprogram.0
2025-01-02 20:02:32.535	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:32.534	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:32.534	debug	doStateChange

tvprogram.0
2025-01-02 20:02:32.534	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:32.529	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:32.529	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:32.529	debug	doStateChange

tvprogram.0
2025-01-02 20:02:32.529	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-05 (ack = true)

tvprogram.0
2025-01-02 20:02:32.529	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:32.528	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:32.528	debug	doStateChange

tvprogram.0
2025-01-02 20:02:32.528	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-05 (ack = true)

tvprogram.0
2025-01-02 20:02:32.520	debug	getProgramAsync

tvprogram.0
2025-01-02 20:02:32.520	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:32.520	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:32.507	debug	getDataAsync first request or changed data events 2025-01-05

tvprogram.0
2025-01-02 20:02:31.969	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:31.968	debug	doStateChange

tvprogram.0
2025-01-02 20:02:31.968	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:31.967	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:31.967	debug	doStateChange

tvprogram.0
2025-01-02 20:02:31.967	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:31.963	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:31.962	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:31.962	debug	doStateChange

tvprogram.0
2025-01-02 20:02:31.962	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-04 (ack = true)

tvprogram.0
2025-01-02 20:02:31.961	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:31.961	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:31.961	debug	doStateChange

tvprogram.0
2025-01-02 20:02:31.961	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-04 (ack = true)

tvprogram.0
2025-01-02 20:02:31.959	debug	The file program/2025-01-04.json has been saved!

tvprogram.0
2025-01-02 20:02:31.954	debug	getProgramAsync

tvprogram.0
2025-01-02 20:02:31.954	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:31.953	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:31.942	debug	getDataAsync first request or changed data events 2025-01-04

tvprogram.0
2025-01-02 20:02:31.447	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:31.447	debug	doStateChange

tvprogram.0
2025-01-02 20:02:31.447	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:31.445	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:31.445	debug	doStateChange

tvprogram.0
2025-01-02 20:02:31.445	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:31.441	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:31.441	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:31.441	debug	doStateChange

tvprogram.0
2025-01-02 20:02:31.440	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-03 (ack = true)

tvprogram.0
2025-01-02 20:02:31.440	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:31.440	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:31.439	debug	doStateChange

tvprogram.0
2025-01-02 20:02:31.439	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-03 (ack = true)

tvprogram.0
2025-01-02 20:02:31.435	debug	The file program/2025-01-03.json has been saved!

tvprogram.0
2025-01-02 20:02:31.432	debug	getProgramAsync

tvprogram.0
2025-01-02 20:02:31.432	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:31.431	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:31.423	debug	getDataAsync first request or changed data events 2025-01-03

tvprogram.0
2025-01-02 20:02:30.979	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:30.979	debug	doStateChange

tvprogram.0
2025-01-02 20:02:30.978	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:30.977	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:30.977	debug	doStateChange

tvprogram.0
2025-01-02 20:02:30.977	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:30.970	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:30.970	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:30.970	debug	doStateChange

tvprogram.0
2025-01-02 20:02:30.970	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-02 (ack = true)

tvprogram.0
2025-01-02 20:02:30.970	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:30.970	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:30.969	debug	doStateChange

tvprogram.0
2025-01-02 20:02:30.969	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-02 (ack = true)

tvprogram.0
2025-01-02 20:02:30.941	debug	The file program/2025-01-02.json has been saved!

tvprogram.0
2025-01-02 20:02:30.932	debug	getProgramAsync

tvprogram.0
2025-01-02 20:02:30.931	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:30.931	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:30.915	debug	getDataAsync first request or changed data events 2025-01-02

tvprogram.0
2025-01-02 20:02:30.358	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:30.357	debug	doStateChange

tvprogram.0
2025-01-02 20:02:30.357	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:30.356	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:30.356	debug	doStateChange

tvprogram.0
2025-01-02 20:02:30.356	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:30.352	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:30.352	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:30.352	debug	doStateChange

tvprogram.0
2025-01-02 20:02:30.351	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-01 (ack = true)

tvprogram.0
2025-01-02 20:02:30.350	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:30.350	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:30.350	debug	doStateChange

tvprogram.0
2025-01-02 20:02:30.350	debug	state tvprogram.0.tv1.cmd changed: new|program|2025-01-01 (ack = true)

tvprogram.0
2025-01-02 20:02:30.346	debug	The file program/2025-01-01.json has been saved!

tvprogram.0
2025-01-02 20:02:30.340	debug	getProgramAsync

tvprogram.0
2025-01-02 20:02:30.340	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:30.340	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:30.326	debug	getDataAsync first request or changed data events 2025-01-01

tvprogram.0
2025-01-02 20:02:29.837	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:29.837	debug	doStateChange

tvprogram.0
2025-01-02 20:02:29.837	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:29.836	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:29.836	debug	doStateChange

tvprogram.0
2025-01-02 20:02:29.835	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:29.831	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:29.831	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:29.831	debug	doStateChange

tvprogram.0
2025-01-02 20:02:29.831	debug	state tvprogram.0.tv1.cmd changed: new|program|2024-12-31 (ack = true)

tvprogram.0
2025-01-02 20:02:29.829	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:29.829	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:29.829	debug	doStateChange

tvprogram.0
2025-01-02 20:02:29.829	debug	state tvprogram.0.tv1.cmd changed: new|program|2024-12-31 (ack = true)

tvprogram.0
2025-01-02 20:02:29.828	debug	The file program/2024-12-31.json has been saved!

tvprogram.0
2025-01-02 20:02:29.824	debug	getProgramAsync

tvprogram.0
2025-01-02 20:02:29.824	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:29.823	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:29.813	debug	getDataAsync first request or changed data events 2024-12-31

tvprogram.0
2025-01-02 20:02:29.365	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:29.364	debug	doStateChange

tvprogram.0
2025-01-02 20:02:29.364	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:29.363	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:29.363	debug	doStateChange

tvprogram.0
2025-01-02 20:02:29.363	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:29.359	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:29.359	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:29.358	debug	doStateChange

tvprogram.0
2025-01-02 20:02:29.358	debug	state tvprogram.0.tv1.cmd changed: new|program|2024-12-30 (ack = true)

tvprogram.0
2025-01-02 20:02:29.357	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:29.357	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:29.357	debug	doStateChange

tvprogram.0
2025-01-02 20:02:29.356	debug	state tvprogram.0.tv1.cmd changed: new|program|2024-12-30 (ack = true)

tvprogram.0
2025-01-02 20:02:29.353	debug	The file program/2024-12-30.json has been saved!

tvprogram.0
2025-01-02 20:02:29.351	debug	getProgramAsync

tvprogram.0
2025-01-02 20:02:29.351	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:29.350	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:29.331	debug	getDataAsync first request or changed data events 2024-12-30

tvprogram.0
2025-01-02 20:02:28.887	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:28.887	debug	doStateChange

tvprogram.0
2025-01-02 20:02:28.886	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:28.885	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:28.885	debug	doStateChange

tvprogram.0
2025-01-02 20:02:28.885	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:28.881	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:28.881	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:28.881	debug	doStateChange

tvprogram.0
2025-01-02 20:02:28.880	debug	state tvprogram.0.tv1.cmd changed: new|program|2024-12-29 (ack = true)

tvprogram.0
2025-01-02 20:02:28.879	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:28.879	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:28.879	debug	doStateChange

tvprogram.0
2025-01-02 20:02:28.879	debug	state tvprogram.0.tv1.cmd changed: new|program|2024-12-29 (ack = true)

tvprogram.0
2025-01-02 20:02:28.876	debug	The file program/2024-12-29.json has been saved!

tvprogram.0
2025-01-02 20:02:28.873	debug	getProgramAsync

tvprogram.0
2025-01-02 20:02:28.873	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:28.872	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:28.860	debug	getDataAsync first request or changed data events 2024-12-29

tvprogram.0
2025-01-02 20:02:28.433	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:28.433	debug	doStateChange

tvprogram.0
2025-01-02 20:02:28.433	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:28.431	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:28.430	debug	doStateChange

tvprogram.0
2025-01-02 20:02:28.430	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:28.426	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:28.426	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:28.426	debug	doStateChange

tvprogram.0
2025-01-02 20:02:28.426	debug	state tvprogram.0.tv1.cmd changed: new|program|2024-12-28 (ack = true)

tvprogram.0
2025-01-02 20:02:28.425	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:28.425	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:28.424	debug	doStateChange

tvprogram.0
2025-01-02 20:02:28.424	debug	state tvprogram.0.tv1.cmd changed: new|program|2024-12-28 (ack = true)

tvprogram.0
2025-01-02 20:02:28.422	debug	The file program/2024-12-28.json has been saved!

tvprogram.0
2025-01-02 20:02:28.417	debug	getProgramAsync

tvprogram.0
2025-01-02 20:02:28.417	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:28.416	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:28.406	debug	getDataAsync first request or changed data events 2024-12-28

tvprogram.0
2025-01-02 20:02:27.841	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:27.841	debug	doStateChange

tvprogram.0
2025-01-02 20:02:27.840	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:27.839	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:27.839	debug	doStateChange

tvprogram.0
2025-01-02 20:02:27.839	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:27.835	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:27.835	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:27.834	debug	doStateChange

tvprogram.0
2025-01-02 20:02:27.834	debug	state tvprogram.0.tv1.cmd changed: new|genres (ack = true)

tvprogram.0
2025-01-02 20:02:27.833	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:27.833	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:27.833	debug	doStateChange

tvprogram.0
2025-01-02 20:02:27.832	debug	state tvprogram.0.tv1.cmd changed: new|genres (ack = true)

tvprogram.0
2025-01-02 20:02:27.829	debug	The file genres.json has been saved!

tvprogram.0
2025-01-02 20:02:27.827	debug	getProgramAsync

tvprogram.0
2025-01-02 20:02:27.827	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:27.826	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:27.826	debug	getDataAsync first request or changed data genres

tvprogram.0
2025-01-02 20:02:27.507	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:27.507	debug	doStateChange

tvprogram.0
2025-01-02 20:02:27.507	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:27.505	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:27.505	debug	doStateChange

tvprogram.0
2025-01-02 20:02:27.505	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:27.499	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:27.499	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:27.499	debug	doStateChange

tvprogram.0
2025-01-02 20:02:27.499	debug	state tvprogram.0.tv1.cmd changed: new|channels (ack = true)

tvprogram.0
2025-01-02 20:02:27.497	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:27.497	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:27.496	debug	doStateChange

tvprogram.0
2025-01-02 20:02:27.496	debug	state tvprogram.0.tv1.cmd changed: new|channels (ack = true)

tvprogram.0
2025-01-02 20:02:27.492	debug	The file channels.json has been saved!

tvprogram.0
2025-01-02 20:02:27.490	debug	getGenresAsync

tvprogram.0
2025-01-02 20:02:27.489	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:27.489	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:27.489	debug	getDataAsync first request or changed data channels

tvprogram.0
2025-01-02 20:02:27.179	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:27.179	debug	doStateChange

tvprogram.0
2025-01-02 20:02:27.179	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:27.178	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:27.178	debug	doStateChange

tvprogram.0
2025-01-02 20:02:27.178	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:27.174	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:27.174	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:27.174	debug	doStateChange

tvprogram.0
2025-01-02 20:02:27.173	debug	state tvprogram.0.tv1.cmd changed: new|categories (ack = true)

tvprogram.0
2025-01-02 20:02:27.172	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:27.172	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:27.172	debug	doStateChange

tvprogram.0
2025-01-02 20:02:27.172	debug	state tvprogram.0.tv1.cmd changed: new|categories (ack = true)

tvprogram.0
2025-01-02 20:02:27.169	debug	The file categories.json has been saved!

tvprogram.0
2025-01-02 20:02:27.165	debug	getChannelsAsync

tvprogram.0
2025-01-02 20:02:27.165	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:27.165	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:27.164	debug	getDataAsync first request or changed data categories

tvprogram.0
2025-01-02 20:02:26.770	debug	doStateChange

tvprogram.0
2025-01-02 20:02:26.770	debug	state tvprogram.0.tv1.optchnlogopath changed: (ack = true)

tvprogram.0
2025-01-02 20:02:26.770	debug	doStateChange

tvprogram.0
2025-01-02 20:02:26.770	debug	state tvprogram.0.tv1.record changed: (ack = true)

tvprogram.0
2025-01-02 20:02:26.769	debug	doStateChangeCmd

tvprogram.0
2025-01-02 20:02:26.769	debug	doStateChange

tvprogram.0
2025-01-02 20:02:26.768	debug	state tvprogram.0.tv1.cmd changed: (ack = true)

tvprogram.0
2025-01-02 20:02:26.767	debug	doStateChange

tvprogram.0
2025-01-02 20:02:26.767	debug	state tvprogram.0.tv1.selectchannel changed: (ack = true)

tvprogram.0
2025-01-02 20:02:26.767	debug	doStateChange

tvprogram.0
2025-01-02 20:02:26.766	debug	state tvprogram.0.tv1.show changed: 1 (ack = true)

tvprogram.0
2025-01-02 20:02:26.765	debug	doStateChange

tvprogram.0
2025-01-02 20:02:26.765	debug	state tvprogram.0.tv1.channelfilter changed: [] (ack = true)

tvprogram.0
2025-01-02 20:02:26.765	debug	doStateChange

tvprogram.0
2025-01-02 20:02:26.764	debug	state tvprogram.0.tv1.favorites changed: [] (ack = true)

tvprogram.0
2025-01-02 20:02:26.763	debug	doStateChange

tvprogram.0
2025-01-02 20:02:26.763	debug	state tvprogram.0.tv1.config changed: {} (ack = true)

tvprogram.0
2025-01-02 20:02:26.762	debug	doStateChange

tvprogram.0
2025-01-02 20:02:26.762	debug	state tvprogram.0.tv1.name changed: tv1 (ack = true)

tvprogram.0
2025-01-02 20:02:26.687	debug	getCategoriesAsync

tvprogram.0
2025-01-02 20:02:26.687	debug	getDataAsync

tvprogram.0
2025-01-02 20:02:26.686	debug	setState name: tv1.optchnlogopath

tvprogram.0
2025-01-02 20:02:26.686	debug	setState name: tv1.record

tvprogram.0
2025-01-02 20:02:26.685	debug	setState name: tv1.cmd

tvprogram.0
2025-01-02 20:02:26.685	debug	setState name: tv1.selectchannel

tvprogram.0
2025-01-02 20:02:26.685	debug	setState name: tv1.show

tvprogram.0
2025-01-02 20:02:26.684	debug	setState name: tv1.channelfilter

tvprogram.0
2025-01-02 20:02:26.683	debug	setState name: tv1.favorites

tvprogram.0
2025-01-02 20:02:26.683	debug	setState name: tv1.config

tvprogram.0
2025-01-02 20:02:26.683	debug	setState name: tv1.name

tvprogram.0
2025-01-02 20:02:26.682	debug	doStateChange

tvprogram.0
2025-01-02 20:02:26.682	debug	state tvprogram.0.info.connection changed: true (ack = true)

tvprogram.0
2025-01-02 20:02:26.681	debug	doStateChange

tvprogram.0
2025-01-02 20:02:26.681	debug	state tvprogram.0.info.connection changed: true (ack = true)

tvprogram.0
2025-01-02 20:02:26.678	debug	createObjectNotExist optchnlogopath

tvprogram.0
2025-01-02 20:02:26.678	debug	createObjectNotExist record

tvprogram.0
2025-01-02 20:02:26.678	debug	createObjectNotExist cmd

tvprogram.0
2025-01-02 20:02:26.678	debug	createObjectNotExist selectchannel

tvprogram.0
2025-01-02 20:02:26.677	debug	createObjectNotExist show

tvprogram.0
2025-01-02 20:02:26.677	debug	createObjectNotExist channelfilter

tvprogram.0
2025-01-02 20:02:26.676	debug	createObjectNotExist favorites

tvprogram.0
2025-01-02 20:02:26.676	debug	createObjectNotExist config

tvprogram.0
2025-01-02 20:02:26.675	debug	createObjectNotExist name

tvprogram.0
2025-01-02 20:02:26.675	debug	Device exists: tv1

tvprogram.0
2025-01-02 20:02:26.672	debug	createDevice tv1

tvprogram.0
2025-01-02 20:02:26.671	debug	newTVDatapointsAsync

tvprogram.0
2025-01-02 20:02:26.625	debug	getTVDatapointsAsync

tvprogram.0
2025-01-02 20:02:26.624	debug	doObserver

tvprogram.0
2025-01-02 20:02:26.624	debug	setState name: info.connection

tvprogram.0
2025-01-02 20:02:26.622	debug	main onReady open tvprogramm

[OliverIO]

Neue Version 3.0.3

• Das anlegen der Datenpunkte wurde weiter verbessert.

Danke an euch auch nochmal fürs testen.
Wir nähern uns der finalen Version an.

[Tino 0]

@oliverio bis jetzt sieht alles gut aus

[Tino 0]

Moin,
der Adapter läuft seit heute morgen nicht mehr, dass Zertifikat ist abgelaufen.

Gruß Tino

[mcm1957]

@tino-0
Das ist aber ein Problem dass der Webseitenbetreiber beheben sollte.

[Tino 0]

@mcm1957

ja, ist nur als Info anzusehen.

[mcm1957]

@tino-0

Ev. könnte man ja im Adapter das Zertifikat ignorieren. Eine Fake-Seite mit dem Fernsehprogramm seh ich eher als weniger realistisch und kaum gefährlich an. Aber ob das mehr Aufwand als das Setzen einen "ignore certstatus" Bits ist kann nur der Dev beurteilen.