NEWS
Adapter werden nicht angezeigt
-
mit dem sternchen knopf kann man den filter zwischen alle (max 100), installiert, installiert ohne instanz durchwechseln.
für eine genauere sicht gibt es rechts neben dem suchfeld ein knopf mit undendlichkeitssymbol
da kannst du dann die adapter kategorie auswählen. da zeigt es dann alle an der jeweiligen kategorie an.besser finde ich aber die zeilenweise ansicht. die kachelansicht ist mir zu groß.
die zeilendarstellung kannst du über den zeilenknopf oben umschalten@oliverio sagte in Adapter werden nicht angezeigt:
mit dem sternchen knopf kann man den filter zwischen alle (max 100), installiert, installiert ohne instanz durchwechseln.
aber dann müsste der Stern die Farbe wechseln, oder?
-
@sebaboehm was für ein Browser?
-
@oliverio sagte in Adapter werden nicht angezeigt:
mit dem sternchen knopf kann man den filter zwischen alle (max 100), installiert, installiert ohne instanz durchwechseln.
aber dann müsste der Stern die Farbe wechseln, oder?
-
@sebaboehm dann bitte jetzt die Langfassung von
iob diag -
@sebaboehm hast du auch mal geprüft, ob du
@oliverio sagte in Adapter werden nicht angezeigt:
rechts neben dem suchfeld ein knopf mit undendlichkeitssymbol
da kannst du dann die adapter kategorie auswählen. da zeigt es dann alle an der jeweiligen kategorie an.da mehr zu sehen bekommst?
-
@sebaboehm said in Adapter werden nicht angezeigt:
@thomas-braun
ich habe da nie Probleme festgestellt.
Schade das alles mit Updates und Neuerungen immer schlechter wird statt besserKomm mal runter - ist noch gar nicht geklärt was da Sache ist.
Ich sehe OHNE Filter und mit 7.0.17 jede Menge nicht installierte Adapter ...
Edit:
Und am UNTEREN RAnd sehe den Hinweis:
@mcm1957 sagte in Adapter werden nicht angezeigt:
@sebaboehm said in Adapter werden nicht angezeigt:
@thomas-braun
ich habe da nie Probleme festgestellt.
Schade das alles mit Updates und Neuerungen immer schlechter wird statt besserKomm mal runter - ist noch gar nicht geklärt was da Sache ist.
Ich sehe OHNE Filter und mit 7.0.17 jede Menge nicht installierte Adapter ...
Edit:
Und am UNTEREN RAnd sehe den Hinweis:
Same here. Firefox, admin 7.0.22.
27 Adapter installiert, dann folgen in der Kachelansicht weitere NICHT installierte Adapter und zum Schluss
Filtern Sie Adapter, um andere anzuzeigen. Es gibt 485 mehrDer Fehler dürfte also bei @sebaboehm zu suchen sein.
Wenns nicht geht, wie man will - muss mans tun, wie man kann. -
@sebaboehm hast du auch mal geprüft, ob du
@oliverio sagte in Adapter werden nicht angezeigt:
rechts neben dem suchfeld ein knopf mit undendlichkeitssymbol
da kannst du dann die adapter kategorie auswählen. da zeigt es dann alle an der jeweiligen kategorie an.da mehr zu sehen bekommst?
-
@sebaboehm dann bitte jetzt die Langfassung von
iob diag@homoran
====== Start marking the full check here =========Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: ioBrokerMaster Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.31+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 20:11:38 up 4 days, 1:20, 2 users, load average: 0.26, 0.51, 0.39 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2024-08-19 20:11:38 CEST Universal time: Mon 2024-08-19 18:11:38 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': sebaboehm HOME=/home/sebaboehm GROUPS=sebaboehm adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 2.5G 1.2G 1.2M 4.7G 5.7G Swap: 209M 0B 209M Total: 8.4G 2.5G 1.4G Active iob-Instances: 32 7810 M total memory 2361 M used memory 2498 M active memory 3799 M inactive memory 1117 M free memory 175 M buffer memory 4295 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 20:11:38 up 4 days, 1:20, 2 users, load average: 0.26, 0.51, 0.39 Tasks: 192 total, 1 running, 191 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 20.0 sy, 0.0 ni, 80.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7810.0 total, 1115.5 free, 2363.3 used, 4470.4 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 5446.7 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 782M 1.2M 780M 1% /run /dev/mmcblk0p2 ext4 59G 5.7G 50G 11% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 64M 447M 13% /boot/firmware tmpfs tmpfs 781M 0 781M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Aug 15 18:51:35 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B6:16:58 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=9dcdb793-02 rootfstype=ext4 fsck.repair=yes rootwait [Thu Aug 15 18:51:38 2024] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Thu Aug 15 18:51:39 2024] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2949 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=3728508k,nr_inodes=932127,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=799748k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=799744k,nr_inodes=199936,mode=700,uid=1000,gid=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 613M /var/ 206M /var/cache 200M /var/cache/apt 162M /var/lib 134M /var/lib/apt/lists Archived and active journals take up 44.0M in the file system. /opt/iobroker/backups: 39M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 953M /opt/iobroker/iobroker-data/ 772M /opt/iobroker/iobroker-data/files 441M /opt/iobroker/iobroker-data/files/javascript.admin 409M /opt/iobroker/iobroker-data/files/javascript.admin/static 408M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 56M /opt/iobroker/iobroker-data/objects.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.ce422ec2.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2428212-if00 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 *** NodeJS-Installation *** /usr/bin/nodejs v20.16.0 /usr/bin/node v20.16.0 /usr/bin/npm 10.8.1 /usr/bin/npx 10.8.1 /usr/bin/corepack 0.28.2 nodejs: Installed: 20.16.0-1nodesource1 Candidate: 20.16.0-1nodesource1 Version table: *** 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.9 admin: 7.0.22 javascript: 8.7.6 nodejs modules from github: 1 +-- iobroker.govee@0.0.6 (git+ssh://git@github.com/nbuenger/ioBroker.govee.git#73ec80b6350890015d95428dd3bbd3f72417a073) Adapter State + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alarm.0 : alarm : ioBrokerMaster - disabled + system.adapter.alexa2.0 : alexa2 : ioBrokerMaster - enabled system.adapter.backitup.0 : backitup : ioBrokerMaster - disabled system.adapter.backitup.1 : backitup : ioBroker-RasPi-Slave-AiO - disabled + system.adapter.cloud.0 : cloud : ioBrokerMaster - enabled system.adapter.deconz.0 : deconz : ioBrokerMaster - disabled, port: 80 system.adapter.devices.0 : devices : ioBrokerMaster - disabled + system.adapter.discovery.0 : discovery : ioBrokerMaster - enabled system.adapter.dwd.0 : dwd : ioBrokerMaster - disabled + system.adapter.email.0 : email : ioBrokerMaster - enabled + system.adapter.fritzdect.0 : fritzdect : ioBrokerMaster - enabled + system.adapter.govee-local.0 : govee-local : ioBrokerMaster - enabled + system.adapter.govee.0 : govee : ioBrokerMaster - enabled + system.adapter.harmony.0 : harmony : ioBrokerMaster - enabled system.adapter.history.0 : history : ioBrokerMaster - disabled + system.adapter.hm-rega.0 : hm-rega : ioBrokerMaster - enabled + system.adapter.hm-rpc.3 : hm-rpc : ioBrokerMaster - enabled, port: 18701 + system.adapter.hm-rpc.4 : hm-rpc : ioBrokerMaster - enabled, port: 12001 + system.adapter.hm-rpc.5 : hm-rpc : ioBrokerMaster - enabled, port: 12010 + system.adapter.homeconnect.0 : homeconnect : ioBrokerMaster - enabled system.adapter.ical.0 : ical : ioBrokerMaster - enabled system.adapter.info.0 : info : ioBrokerMaster - disabled system.adapter.iogo.0 : iogo : ioBrokerMaster - disabled + system.adapter.iot.0 : iot : ioBrokerMaster - enabled system.adapter.jarvis.0 : jarvis : ioBrokerMaster - disabled + system.adapter.javascript.0 : javascript : ioBrokerMaster - enabled system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBrokerMaster - disabled, port: 54321 + system.adapter.mihome.0 : mihome : ioBrokerMaster - enabled, port: 9898, bind: 0.0.0.0 system.adapter.mobile.0 : mobile : ioBrokerMaster - disabled system.adapter.mqtt.0 : mqtt : ioBrokerMaster - disabled, port: 1883, bind: 0.0.0.0 + system.adapter.myenergi.0 : myenergi : ioBrokerMaster - enabled system.adapter.nanoleaf-lightpanels.0 : nanoleaf-lightpanels : ioBrokerMaster - disabled, port: 16021 system.adapter.ping.0 : ping : ioBrokerMaster - disabled + system.adapter.pushover.0 : pushover : ioBrokerMaster - enabled + system.adapter.pvforecast.0 : pvforecast : ioBrokerMaster - enabled system.adapter.reolink.0 : reolink : ioBrokerMaster - disabled system.adapter.ring.0 : ring : ioBrokerMaster - disabled + system.adapter.roborock.0 : roborock : ioBrokerMaster - enabled system.adapter.rpi2.0 : rpi2 : ioBrokerMaster - disabled + system.adapter.samsung.0 : samsung : ioBroker-RasPi-Slave-AiO - enabled system.adapter.scenes.0 : scenes : ioBrokerMaster - disabled system.adapter.sun2000.0 : sun2000 : ioBrokerMaster - disabled, port: 502 system.adapter.synochat.0 : synochat : ioBrokerMaster - disabled + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : ioBrokerMaster - disabled + system.adapter.tr-064.0 : tr-064 : ioBrokerMaster - enabled + system.adapter.tr-064.1 : tr-064 : ioBrokerMaster - enabled system.adapter.tr-064.2 : tr-064 : ioBrokerMaster - disabled + system.adapter.tr-064.3 : tr-064 : ioBrokerMaster - enabled + system.adapter.trashschedule.0 : trashschedule : ioBrokerMaster - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : ioBrokerMaster - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBrokerMaster - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBrokerMaster - disabled system.adapter.vis.0 : vis : ioBrokerMaster - enabled system.adapter.weatherunderground.0 : weatherunderground : ioBrokerMaster - disabled + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : ioBrokerMaster - disabled + system.adapter.worx.0 : worx : ioBrokerMaster - enabled + system.adapter.zigbee.0 : zigbee : ioBrokerMaster - enabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.3 : hm-rpc : ioBrokerMaster - enabled, port: 18701 + system.adapter.hm-rpc.4 : hm-rpc : ioBrokerMaster - enabled, port: 12001 + system.adapter.hm-rpc.5 : hm-rpc : ioBrokerMaster - enabled, port: 12010 + system.adapter.mihome.0 : mihome : ioBrokerMaster - enabled, port: 9898, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : ioBrokerMaster - enabled, port: /dev/ttyACM0 ioBroker-Repositories ┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): Stable (default) Upgrade policy: none Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.0.22 , installed 7.0.22 Adapter "alarm" : 3.6.1 , installed 3.6.1 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.16 , installed 3.0.16 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "deconz" : 1.4.1 , installed 1.4.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 1.3.1 , installed 1.3.1 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "govee-local" : 0.2.6 , installed 0.2.6 Adapter "harmony" : 1.4.0 , installed 1.4.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.17.0 Adapter "homeconnect" : 1.4.1 , installed 1.4.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.7.6 , installed 8.7.6 Controller "js-controller": 6.0.9 , installed 6.0.9 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 4.2.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "myenergi" : 0.0.3 , installed 0.0.3 Adapter "nanoleaf-lightpanels": 1.4.0, installed 1.4.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "pvforecast" : 3.0.0 , installed 3.0.0 Adapter "reolink" : 1.1.0 , installed 1.1.0 Adapter "ring" : 5.1.0 , installed 5.1.0 Adapter "roborock" : 0.6.4 , installed 0.6.4 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "scenes" : 3.2.1 , installed 3.2.1 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sun2000" : 0.11.0 , installed 0.11.0 Adapter "synochat" : 1.3.1 , installed 1.3.1 Adapter "telegram" : 3.9.0 , installed 3.9.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "worx" : 3.0.2 , installed 3.0.2 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 16359 States: 13487 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:12010 0.0.0.0:* LISTEN 1001 56613 15371/io.hm-rpc.5 tcp 0 0 0.0.0.0:12001 0.0.0.0:* LISTEN 1001 54685 15348/io.hm-rpc.4 tcp 0 0 0.0.0.0:18701 0.0.0.0:* LISTEN 1001 56561 15333/io.hm-rpc.3 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6539 675/sshd: /usr/sbin tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 53180 15098/iobroker.js-c tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 53175 15098/iobroker.js-c tcp6 0 0 :::8081 :::* LISTEN 1001 54468 15127/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 56117 15663/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 6541 675/sshd: /usr/sbin tcp6 0 0 :::61991 :::* LISTEN 1001 55606 15303/io.harmony.0 udp 0 0 0.0.0.0:4002 0.0.0.0:* 1001 743933 23014/io.govee-loca udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 55607 15303/io.harmony.0 udp 0 0 0.0.0.0:33604 0.0.0.0:* 104 3594 534/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 3592 534/avahi-daemon: r udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 640961 15416/io.mihome.0 udp6 0 0 fe80::eed1:52f3:3fc:546 :::* 0 4997 614/NetworkManager udp6 0 0 :::5353 :::* 104 3593 534/avahi-daemon: r udp6 0 0 :::50789 :::* 104 3595 534/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-08-19 19:52:36.755 - info: admin.0 (15127) ==> Connected system.user.admin from ::ffff:192.168.178.166 2024-08-19 19:52:39.403 - info: admin.0 (15127) <== Disconnect system.user.admin from ::ffff:192.168.178.166 admin 2024-08-19 19:52:39.905 - info: admin.0 (15127) ==> Connected system.user.admin from ::ffff:192.168.178.166 2024-08-19 20:06:34.920 - info: alexa2.0 (15273) Update cookie in adapter configuration ... restarting ... 2024-08-19 20:06:35.042 - info: host.ioBrokerMaster stopInstance system.adapter.alexa2.0 (force=false, process=true) 2024-08-19 20:06:35.053 - info: alexa2.0 (15273) Got terminate signal TERMINATE_YOURSELF 2024-08-19 20:06:35.056 - info: alexa2.0 (15273) terminating 2024-08-19 20:06:35.058 - info: alexa2.0 (15273) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-08-19 20:06:35.094 - info: host.ioBrokerMaster stopInstance system.adapter.alexa2.0 send kill signal 2024-08-19 20:06:35.560 - info: alexa2.0 (15273) terminating 2024-08-19 20:06:35.746 - info: host.ioBrokerMaster instance system.adapter.alexa2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-08-19 20:06:39.355 - info: host.ioBrokerMaster instance system.adapter.alexa2.0 in version "3.26.5" started with pid 23154 2024-08-19 20:06:42.082 - info: alexa2.0 (23154) starting. Version 3.26.5 in /opt/iobroker/node_modules/iobroker.alexa2, node: v20.16.0, js-controller: 6.0.9 2024-08-19 20:06:42.143 - info: alexa2.0 (23154) Starting Alexa2 adapter ... it can take several minutes to initialize all data. Please be patient! A done message is logged. 2024-08-19 20:06:45.690 - info: alexa2.0 (23154) Initialize all Device states ... 2024-08-19 20:07:24.296 - info: alexa2.0 (23154) Unknown Device, but enabling commands, Try it and report back if commands work. 2024-08-19 20:07:24.297 - info: alexa2.0 (23154) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted 2024-08-19 20:07:24.297 - info: alexa2.0 (23154) Device-type:A218GHTK4WJVLR - Sebastian's 2021 Samsung UHD TV (2021 Samsung UHD TV) (2021 Samsung UHD TV) (2021 Samsung UHD TV) (2021 Samsung UHD TV) (2021 Samsung UHD TV) (TUNE_IN,CUSTOM_ALARM_TONE,AMAZON_MUSIC,DREAM_TRAINING,TIDAL,SPEECH_RECOGNIZER_USS,AUDIBLE,SLEEP,TIMERS_ALARMS_NOTIFICATIONS_VOLUME,SIRIUSXM,DEEZER,SET_TIME_ZONE,SUPPORTS_LOCALE,GOLDFISH,KINDLE_BOOKS,DIALOG_INTERFACE_VERSION,APPLE_MUSIC,MICROPHONE,ASCENDING_ALARM_VOLUME,CHANGE_NAME,DEREGISTER_DEVICE,SOUND_SETTINGS,TOUCH_INITIATED,ADAPTIVE_LISTENING,HANDS_FREE,SET_LOCALE,MUSIC_SKILL,VOLUME_SETTING,PERSISTENT_CONNECTION,MULTI_WAKEWORDS_SUPPORTED,EARCONS,SUPPORTS_LOCALE_SWITCH,SUPPORTS_CONNECTED_HOME_CLOUD_ONLY,AUDIO_PLAYER,TIMERS_AND_ALARMS,I_HEART_RADIO,LIVE_VIEW,REMINDERS) 2024-08-19 20:07:33.400 - info: worx.0 (15485) No new Firmware found, create dummy states... 2024-08-19 20:07:52.002 - info: alexa2.0 (23154) No smart home devices to query 2024-08-19 20:07:55.428 - info: alexa2.0 (23154) Subscribing to states... 2024-08-19 20:07:55.435 - info: alexa2.0 (23154) Deleting the following states: ["Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729","Smart-Home-Devices.0e29cc26-595a-45c0-a2c8-14995d2bfb62","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2","Smart-Home-Devices.493b939f-26d1-48bb-9892-b59e4582ada0","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14","Smart-Home-Devices.ca9e8f08-3ead-4788-8084-ca5db26baeb8","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.#delete","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.#enabled","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.#includeInAllQuery","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.#query","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.connectivity","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.connectivity-reason","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.powerState","Smart-Home-Devices.0e29cc26-595a-45c0-a2c8-14995d2bfb62.#delete","Smart-Home-Devices.0e29cc26-595a-45c0-a2c8-14995d2bfb62.#enabled","Smart-Home-Devices.0e29cc26-595a-45c0-a2c8-14995d2bfb62.powerState","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.#delete","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.#enabled","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.#includeInAllQuery","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.#query","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.connectivity","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.connectivity-reason","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.powerState","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.#delete","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.#enabled","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.#includeInAllQuery","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.#query","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.brightness","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.color-brightness","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.color-hue","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.color-saturation","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.colorName","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.colorRgb","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.colorTemperatureInKelvin","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.colorTemperatureName","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.connectivity","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.connectivity-reason","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.powerState","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.#delete","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.#enabled","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.#includeInAllQuery","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.#query","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.brightness","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.color-brightness","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.color-hue","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.color-saturation","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.colorName","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.colorRgb","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.colorTemperatureInKelvin","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.colorTemperatureName","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.connectivity","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.connectivity-reason","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.powerState","Smart-Home-Devices.493b939f-26d1-48bb-9892-b59e4582ada0.#delete","Smart-Home-Devices.493b939f-26d1-48bb-9892-b59e4582ada0.#enabled","Smart-Home-Devices.493b939f-26d1-48bb-9892-b59e4582ada0.powerState","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.#delete","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.#enabled","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.#includeInAllQuery","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.#query","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.connectivity","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.connectivity-reason","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.powerState","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.#delete","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.#enabled","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.#includeInAllQuery","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.#query","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.brightness","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.color-brightness","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.color-hue","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.color-saturation","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.colorName","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.colorRgb","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.colorTemperatureInKelvin","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.colorTemperatureName","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.connectivity","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.connectivity-reason","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.powerState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.#delete","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.#enabled","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.#includeInAllQuery","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.#query","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.Picture-PictureMode-mode","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.Sound-SoundMode-mode","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-Ambient-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-Art-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-ColorInversion-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-Enlarge-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-Grayscale-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-HighContrast-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-MultiOutputAudio-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-MultiView-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-VideoDescription-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-VoiceGuide-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.powerState","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.#delete","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.#enabled","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.#includeInAllQuery","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.#query","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.powerState","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.program-mode","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.silence-toggleState","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.speed-toggleState","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.#delete","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.#enabled","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.#includeInAllQuery","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.#query","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.connectivity","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.connectivity-reason","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.powerState","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.#delete","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.#enabled","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.#includeInAllQuery","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.#query","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.connectivity","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.connectivity-reason","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.powerState","Smart-Home-Devices.ca9e8f08-3ead-4788-8084-ca5db26baeb8.#delete","Smart-Home-Devices.ca9e8f08-3ead-4788-8084-ca5db26baeb8.#enabled","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.#delete","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.#enabled","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.#includeInAllQuery","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.#query","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.connectivity","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.connectivity-reason","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.powerState","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.#delete","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.#enabled","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.#includeInAllQuery","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.#query","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.connectivity","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.connectivity-reason","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.powerState"] 2024-08-19 20:07:56.905 - info: alexa2.0 (23154) Alexa-Push-Connection (macDms = true) established. Disable Polling 2024-08-19 20:08:15.902 - info: alexa2.0 (23154) Initialization Done ... 2024-08-19 20:09:53.633 - info: host.ioBrokerMaster Updating repository "Stable (default)" under "http://download.iobroker.net/sources-dist.json"============ Mark until here for C&P =============
-
@homoran
====== Start marking the full check here =========Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: ioBrokerMaster Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.31+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 20:11:38 up 4 days, 1:20, 2 users, load average: 0.26, 0.51, 0.39 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2024-08-19 20:11:38 CEST Universal time: Mon 2024-08-19 18:11:38 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': sebaboehm HOME=/home/sebaboehm GROUPS=sebaboehm adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 2.5G 1.2G 1.2M 4.7G 5.7G Swap: 209M 0B 209M Total: 8.4G 2.5G 1.4G Active iob-Instances: 32 7810 M total memory 2361 M used memory 2498 M active memory 3799 M inactive memory 1117 M free memory 175 M buffer memory 4295 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 20:11:38 up 4 days, 1:20, 2 users, load average: 0.26, 0.51, 0.39 Tasks: 192 total, 1 running, 191 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 20.0 sy, 0.0 ni, 80.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7810.0 total, 1115.5 free, 2363.3 used, 4470.4 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 5446.7 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 782M 1.2M 780M 1% /run /dev/mmcblk0p2 ext4 59G 5.7G 50G 11% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 64M 447M 13% /boot/firmware tmpfs tmpfs 781M 0 781M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Aug 15 18:51:35 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B6:16:58 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=9dcdb793-02 rootfstype=ext4 fsck.repair=yes rootwait [Thu Aug 15 18:51:38 2024] EXT4-fs (mmcblk0p2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d ro with ordered data mode. Quota mode: none. [Thu Aug 15 18:51:39 2024] EXT4-fs (mmcblk0p2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2949 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=3728508k,nr_inodes=932127,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=799748k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=799744k,nr_inodes=199936,mode=700,uid=1000,gid=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 613M /var/ 206M /var/cache 200M /var/cache/apt 162M /var/lib 134M /var/lib/apt/lists Archived and active journals take up 44.0M in the file system. /opt/iobroker/backups: 39M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 953M /opt/iobroker/iobroker-data/ 772M /opt/iobroker/iobroker-data/files 441M /opt/iobroker/iobroker-data/files/javascript.admin 409M /opt/iobroker/iobroker-data/files/javascript.admin/static 408M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 56M /opt/iobroker/iobroker-data/objects.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.ce422ec2.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2428212-if00 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 *** NodeJS-Installation *** /usr/bin/nodejs v20.16.0 /usr/bin/node v20.16.0 /usr/bin/npm 10.8.1 /usr/bin/npx 10.8.1 /usr/bin/corepack 0.28.2 nodejs: Installed: 20.16.0-1nodesource1 Candidate: 20.16.0-1nodesource1 Version table: *** 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.9 admin: 7.0.22 javascript: 8.7.6 nodejs modules from github: 1 +-- iobroker.govee@0.0.6 (git+ssh://git@github.com/nbuenger/ioBroker.govee.git#73ec80b6350890015d95428dd3bbd3f72417a073) Adapter State + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alarm.0 : alarm : ioBrokerMaster - disabled + system.adapter.alexa2.0 : alexa2 : ioBrokerMaster - enabled system.adapter.backitup.0 : backitup : ioBrokerMaster - disabled system.adapter.backitup.1 : backitup : ioBroker-RasPi-Slave-AiO - disabled + system.adapter.cloud.0 : cloud : ioBrokerMaster - enabled system.adapter.deconz.0 : deconz : ioBrokerMaster - disabled, port: 80 system.adapter.devices.0 : devices : ioBrokerMaster - disabled + system.adapter.discovery.0 : discovery : ioBrokerMaster - enabled system.adapter.dwd.0 : dwd : ioBrokerMaster - disabled + system.adapter.email.0 : email : ioBrokerMaster - enabled + system.adapter.fritzdect.0 : fritzdect : ioBrokerMaster - enabled + system.adapter.govee-local.0 : govee-local : ioBrokerMaster - enabled + system.adapter.govee.0 : govee : ioBrokerMaster - enabled + system.adapter.harmony.0 : harmony : ioBrokerMaster - enabled system.adapter.history.0 : history : ioBrokerMaster - disabled + system.adapter.hm-rega.0 : hm-rega : ioBrokerMaster - enabled + system.adapter.hm-rpc.3 : hm-rpc : ioBrokerMaster - enabled, port: 18701 + system.adapter.hm-rpc.4 : hm-rpc : ioBrokerMaster - enabled, port: 12001 + system.adapter.hm-rpc.5 : hm-rpc : ioBrokerMaster - enabled, port: 12010 + system.adapter.homeconnect.0 : homeconnect : ioBrokerMaster - enabled system.adapter.ical.0 : ical : ioBrokerMaster - enabled system.adapter.info.0 : info : ioBrokerMaster - disabled system.adapter.iogo.0 : iogo : ioBrokerMaster - disabled + system.adapter.iot.0 : iot : ioBrokerMaster - enabled system.adapter.jarvis.0 : jarvis : ioBrokerMaster - disabled + system.adapter.javascript.0 : javascript : ioBrokerMaster - enabled system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBrokerMaster - disabled, port: 54321 + system.adapter.mihome.0 : mihome : ioBrokerMaster - enabled, port: 9898, bind: 0.0.0.0 system.adapter.mobile.0 : mobile : ioBrokerMaster - disabled system.adapter.mqtt.0 : mqtt : ioBrokerMaster - disabled, port: 1883, bind: 0.0.0.0 + system.adapter.myenergi.0 : myenergi : ioBrokerMaster - enabled system.adapter.nanoleaf-lightpanels.0 : nanoleaf-lightpanels : ioBrokerMaster - disabled, port: 16021 system.adapter.ping.0 : ping : ioBrokerMaster - disabled + system.adapter.pushover.0 : pushover : ioBrokerMaster - enabled + system.adapter.pvforecast.0 : pvforecast : ioBrokerMaster - enabled system.adapter.reolink.0 : reolink : ioBrokerMaster - disabled system.adapter.ring.0 : ring : ioBrokerMaster - disabled + system.adapter.roborock.0 : roborock : ioBrokerMaster - enabled system.adapter.rpi2.0 : rpi2 : ioBrokerMaster - disabled + system.adapter.samsung.0 : samsung : ioBroker-RasPi-Slave-AiO - enabled system.adapter.scenes.0 : scenes : ioBrokerMaster - disabled system.adapter.sun2000.0 : sun2000 : ioBrokerMaster - disabled, port: 502 system.adapter.synochat.0 : synochat : ioBrokerMaster - disabled + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : ioBrokerMaster - disabled + system.adapter.tr-064.0 : tr-064 : ioBrokerMaster - enabled + system.adapter.tr-064.1 : tr-064 : ioBrokerMaster - enabled system.adapter.tr-064.2 : tr-064 : ioBrokerMaster - disabled + system.adapter.tr-064.3 : tr-064 : ioBrokerMaster - enabled + system.adapter.trashschedule.0 : trashschedule : ioBrokerMaster - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : ioBrokerMaster - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBrokerMaster - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBrokerMaster - disabled system.adapter.vis.0 : vis : ioBrokerMaster - enabled system.adapter.weatherunderground.0 : weatherunderground : ioBrokerMaster - disabled + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : ioBrokerMaster - disabled + system.adapter.worx.0 : worx : ioBrokerMaster - enabled + system.adapter.zigbee.0 : zigbee : ioBrokerMaster - enabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.3 : hm-rpc : ioBrokerMaster - enabled, port: 18701 + system.adapter.hm-rpc.4 : hm-rpc : ioBrokerMaster - enabled, port: 12001 + system.adapter.hm-rpc.5 : hm-rpc : ioBrokerMaster - enabled, port: 12010 + system.adapter.mihome.0 : mihome : ioBrokerMaster - enabled, port: 9898, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : ioBrokerMaster - enabled, port: /dev/ttyACM0 ioBroker-Repositories ┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): Stable (default) Upgrade policy: none Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.0.22 , installed 7.0.22 Adapter "alarm" : 3.6.1 , installed 3.6.1 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.16 , installed 3.0.16 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "deconz" : 1.4.1 , installed 1.4.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 1.3.1 , installed 1.3.1 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "govee-local" : 0.2.6 , installed 0.2.6 Adapter "harmony" : 1.4.0 , installed 1.4.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.17.0 Adapter "homeconnect" : 1.4.1 , installed 1.4.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.7.6 , installed 8.7.6 Controller "js-controller": 6.0.9 , installed 6.0.9 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 4.2.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "myenergi" : 0.0.3 , installed 0.0.3 Adapter "nanoleaf-lightpanels": 1.4.0, installed 1.4.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "pvforecast" : 3.0.0 , installed 3.0.0 Adapter "reolink" : 1.1.0 , installed 1.1.0 Adapter "ring" : 5.1.0 , installed 5.1.0 Adapter "roborock" : 0.6.4 , installed 0.6.4 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "scenes" : 3.2.1 , installed 3.2.1 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sun2000" : 0.11.0 , installed 0.11.0 Adapter "synochat" : 1.3.1 , installed 1.3.1 Adapter "telegram" : 3.9.0 , installed 3.9.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "worx" : 3.0.2 , installed 3.0.2 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 16359 States: 13487 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:12010 0.0.0.0:* LISTEN 1001 56613 15371/io.hm-rpc.5 tcp 0 0 0.0.0.0:12001 0.0.0.0:* LISTEN 1001 54685 15348/io.hm-rpc.4 tcp 0 0 0.0.0.0:18701 0.0.0.0:* LISTEN 1001 56561 15333/io.hm-rpc.3 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6539 675/sshd: /usr/sbin tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 53180 15098/iobroker.js-c tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 53175 15098/iobroker.js-c tcp6 0 0 :::8081 :::* LISTEN 1001 54468 15127/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 56117 15663/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 6541 675/sshd: /usr/sbin tcp6 0 0 :::61991 :::* LISTEN 1001 55606 15303/io.harmony.0 udp 0 0 0.0.0.0:4002 0.0.0.0:* 1001 743933 23014/io.govee-loca udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 55607 15303/io.harmony.0 udp 0 0 0.0.0.0:33604 0.0.0.0:* 104 3594 534/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 3592 534/avahi-daemon: r udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 640961 15416/io.mihome.0 udp6 0 0 fe80::eed1:52f3:3fc:546 :::* 0 4997 614/NetworkManager udp6 0 0 :::5353 :::* 104 3593 534/avahi-daemon: r udp6 0 0 :::50789 :::* 104 3595 534/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-08-19 19:52:36.755 - info: admin.0 (15127) ==> Connected system.user.admin from ::ffff:192.168.178.166 2024-08-19 19:52:39.403 - info: admin.0 (15127) <== Disconnect system.user.admin from ::ffff:192.168.178.166 admin 2024-08-19 19:52:39.905 - info: admin.0 (15127) ==> Connected system.user.admin from ::ffff:192.168.178.166 2024-08-19 20:06:34.920 - info: alexa2.0 (15273) Update cookie in adapter configuration ... restarting ... 2024-08-19 20:06:35.042 - info: host.ioBrokerMaster stopInstance system.adapter.alexa2.0 (force=false, process=true) 2024-08-19 20:06:35.053 - info: alexa2.0 (15273) Got terminate signal TERMINATE_YOURSELF 2024-08-19 20:06:35.056 - info: alexa2.0 (15273) terminating 2024-08-19 20:06:35.058 - info: alexa2.0 (15273) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-08-19 20:06:35.094 - info: host.ioBrokerMaster stopInstance system.adapter.alexa2.0 send kill signal 2024-08-19 20:06:35.560 - info: alexa2.0 (15273) terminating 2024-08-19 20:06:35.746 - info: host.ioBrokerMaster instance system.adapter.alexa2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-08-19 20:06:39.355 - info: host.ioBrokerMaster instance system.adapter.alexa2.0 in version "3.26.5" started with pid 23154 2024-08-19 20:06:42.082 - info: alexa2.0 (23154) starting. Version 3.26.5 in /opt/iobroker/node_modules/iobroker.alexa2, node: v20.16.0, js-controller: 6.0.9 2024-08-19 20:06:42.143 - info: alexa2.0 (23154) Starting Alexa2 adapter ... it can take several minutes to initialize all data. Please be patient! A done message is logged. 2024-08-19 20:06:45.690 - info: alexa2.0 (23154) Initialize all Device states ... 2024-08-19 20:07:24.296 - info: alexa2.0 (23154) Unknown Device, but enabling commands, Try it and report back if commands work. 2024-08-19 20:07:24.297 - info: alexa2.0 (23154) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted 2024-08-19 20:07:24.297 - info: alexa2.0 (23154) Device-type:A218GHTK4WJVLR - Sebastian's 2021 Samsung UHD TV (2021 Samsung UHD TV) (2021 Samsung UHD TV) (2021 Samsung UHD TV) (2021 Samsung UHD TV) (2021 Samsung UHD TV) (TUNE_IN,CUSTOM_ALARM_TONE,AMAZON_MUSIC,DREAM_TRAINING,TIDAL,SPEECH_RECOGNIZER_USS,AUDIBLE,SLEEP,TIMERS_ALARMS_NOTIFICATIONS_VOLUME,SIRIUSXM,DEEZER,SET_TIME_ZONE,SUPPORTS_LOCALE,GOLDFISH,KINDLE_BOOKS,DIALOG_INTERFACE_VERSION,APPLE_MUSIC,MICROPHONE,ASCENDING_ALARM_VOLUME,CHANGE_NAME,DEREGISTER_DEVICE,SOUND_SETTINGS,TOUCH_INITIATED,ADAPTIVE_LISTENING,HANDS_FREE,SET_LOCALE,MUSIC_SKILL,VOLUME_SETTING,PERSISTENT_CONNECTION,MULTI_WAKEWORDS_SUPPORTED,EARCONS,SUPPORTS_LOCALE_SWITCH,SUPPORTS_CONNECTED_HOME_CLOUD_ONLY,AUDIO_PLAYER,TIMERS_AND_ALARMS,I_HEART_RADIO,LIVE_VIEW,REMINDERS) 2024-08-19 20:07:33.400 - info: worx.0 (15485) No new Firmware found, create dummy states... 2024-08-19 20:07:52.002 - info: alexa2.0 (23154) No smart home devices to query 2024-08-19 20:07:55.428 - info: alexa2.0 (23154) Subscribing to states... 2024-08-19 20:07:55.435 - info: alexa2.0 (23154) Deleting the following states: ["Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729","Smart-Home-Devices.0e29cc26-595a-45c0-a2c8-14995d2bfb62","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2","Smart-Home-Devices.493b939f-26d1-48bb-9892-b59e4582ada0","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14","Smart-Home-Devices.ca9e8f08-3ead-4788-8084-ca5db26baeb8","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.#delete","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.#enabled","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.#includeInAllQuery","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.#query","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.connectivity","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.connectivity-reason","Smart-Home-Devices.045069fd-03d2-4a35-9b5c-2ac447775729.powerState","Smart-Home-Devices.0e29cc26-595a-45c0-a2c8-14995d2bfb62.#delete","Smart-Home-Devices.0e29cc26-595a-45c0-a2c8-14995d2bfb62.#enabled","Smart-Home-Devices.0e29cc26-595a-45c0-a2c8-14995d2bfb62.powerState","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.#delete","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.#enabled","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.#includeInAllQuery","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.#query","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.connectivity","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.connectivity-reason","Smart-Home-Devices.19c5893d-ffef-4b64-8a13-aaff53b08c88.powerState","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.#delete","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.#enabled","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.#includeInAllQuery","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.#query","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.brightness","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.color-brightness","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.color-hue","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.color-saturation","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.colorName","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.colorRgb","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.colorTemperatureInKelvin","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.colorTemperatureName","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.connectivity","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.connectivity-reason","Smart-Home-Devices.1e0186fc-b962-410a-9be4-701c5b7ebe19.powerState","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.#delete","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.#enabled","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.#includeInAllQuery","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.#query","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.brightness","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.color-brightness","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.color-hue","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.color-saturation","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.colorName","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.colorRgb","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.colorTemperatureInKelvin","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.colorTemperatureName","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.connectivity","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.connectivity-reason","Smart-Home-Devices.3fd074fc-5dea-494e-9dba-55f89b0572b2.powerState","Smart-Home-Devices.493b939f-26d1-48bb-9892-b59e4582ada0.#delete","Smart-Home-Devices.493b939f-26d1-48bb-9892-b59e4582ada0.#enabled","Smart-Home-Devices.493b939f-26d1-48bb-9892-b59e4582ada0.powerState","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.#delete","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.#enabled","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.#includeInAllQuery","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.#query","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.connectivity","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.connectivity-reason","Smart-Home-Devices.4a34a7f8-12bc-4e32-8f36-5bd7a1084c40.powerState","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.#delete","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.#enabled","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.#includeInAllQuery","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.#query","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.brightness","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.color-brightness","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.color-hue","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.color-saturation","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.colorName","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.colorRgb","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.colorTemperatureInKelvin","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.colorTemperatureName","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.connectivity","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.connectivity-reason","Smart-Home-Devices.985b9b98-78ce-4a62-a4f8-ca15d80f77a4.powerState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.#delete","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.#enabled","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.#includeInAllQuery","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.#query","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.Picture-PictureMode-mode","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.Sound-SoundMode-mode","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-Ambient-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-Art-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-ColorInversion-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-Enlarge-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-Grayscale-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-HighContrast-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-MultiOutputAudio-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-MultiView-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-VideoDescription-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.TV-VoiceGuide-toggleState","Smart-Home-Devices.9da08a27-59d7-4a20-95a4-7d9ecbd77dcf.powerState","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.#delete","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.#enabled","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.#includeInAllQuery","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.#query","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.powerState","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.program-mode","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.silence-toggleState","Smart-Home-Devices.9fcc4dc2-8dcb-4e43-ac5c-52f77411524e.speed-toggleState","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.#delete","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.#enabled","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.#includeInAllQuery","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.#query","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.connectivity","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.connectivity-reason","Smart-Home-Devices.af4068bd-e1e7-49b4-855a-f56bd716d79a.powerState","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.#delete","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.#enabled","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.#includeInAllQuery","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.#query","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.connectivity","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.connectivity-reason","Smart-Home-Devices.b70e61f1-c5c9-4b52-8f35-6b8b3d911f14.powerState","Smart-Home-Devices.ca9e8f08-3ead-4788-8084-ca5db26baeb8.#delete","Smart-Home-Devices.ca9e8f08-3ead-4788-8084-ca5db26baeb8.#enabled","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.#delete","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.#enabled","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.#includeInAllQuery","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.#query","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.connectivity","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.connectivity-reason","Smart-Home-Devices.ecd1056a-3850-4150-ba6c-9bed9fa3280d.powerState","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.#delete","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.#enabled","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.#includeInAllQuery","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.#query","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.connectivity","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.connectivity-reason","Smart-Home-Devices.f5042d29-96f5-4b4f-b1ff-19a07d26e092.powerState"] 2024-08-19 20:07:56.905 - info: alexa2.0 (23154) Alexa-Push-Connection (macDms = true) established. Disable Polling 2024-08-19 20:08:15.902 - info: alexa2.0 (23154) Initialization Done ... 2024-08-19 20:09:53.633 - info: host.ioBrokerMaster Updating repository "Stable (default)" under "http://download.iobroker.net/sources-dist.json"============ Mark until here for C&P =============
@sebaboehm danke!
da sehe ich nichts relevantes.Danke fürcdie Daten. Ich fürchte, da ist zwischen v7.0.17 und 7.0.22 was schiefgelaufen!
@mcm1957 könntest du das mit @foxriver76 mal prüfen, bitte?EDIT: sehe gerade erst den Post von @wcag22, das relativiert das wieder.
-
@mcm1957 sagte in Adapter werden nicht angezeigt:
@sebaboehm said in Adapter werden nicht angezeigt:
@thomas-braun
ich habe da nie Probleme festgestellt.
Schade das alles mit Updates und Neuerungen immer schlechter wird statt besserKomm mal runter - ist noch gar nicht geklärt was da Sache ist.
Ich sehe OHNE Filter und mit 7.0.17 jede Menge nicht installierte Adapter ...
Edit:
Und am UNTEREN RAnd sehe den Hinweis:
Same here. Firefox, admin 7.0.22.
27 Adapter installiert, dann folgen in der Kachelansicht weitere NICHT installierte Adapter und zum Schluss
Filtern Sie Adapter, um andere anzuzeigen. Es gibt 485 mehrDer Fehler dürfte also bei @sebaboehm zu suchen sein.
@wcag22 sagte in Adapter werden nicht angezeigt:
27 Adapter installiert, dann folgen in der Kachelansicht weitere NICHT installierte Adapter
Wie viele werden denn da noch angezeigt?
-
@wcag22 sagte in Adapter werden nicht angezeigt:
27 Adapter installiert, dann folgen in der Kachelansicht weitere NICHT installierte Adapter
Wie viele werden denn da noch angezeigt?
@thomas-braun sagte in Adapter werden nicht angezeigt:
@wcag22 sagte in Adapter werden nicht angezeigt:
27 Adapter installiert, dann folgen in der Kachelansicht weitere NICHT installierte Adapter
Wie viele werden denn da noch angezeigt?
24 Adapter, die nicht installiert sind.
Edit: In Summe also 51 Adapter(kacheln)
Wenns nicht geht, wie man will - muss mans tun, wie man kann. -
@thomas-braun sagte in Adapter werden nicht angezeigt:
@wcag22 sagte in Adapter werden nicht angezeigt:
27 Adapter installiert, dann folgen in der Kachelansicht weitere NICHT installierte Adapter
Wie viele werden denn da noch angezeigt?
24 Adapter, die nicht installiert sind.
Edit: In Summe also 51 Adapter(kacheln)
Das dürfte dann nur aus optischen Gründen mit den ersten Adaptern alphabetisch ausgefüllt werden.
-
Dürfte an der Kachelansicht liegen, in der Listenansicht kommen bei mir auch die nicht installierten Adapter
-
Das dürfte dann nur aus optischen Gründen mit den ersten Adaptern alphabetisch ausgefüllt werden.
@thomas-braun sagte in Adapter werden nicht angezeigt:
Das dürfte dann nur aus optischen Gründen mit den ersten Adaptern alphabetisch ausgefüllt werden.
Ich weiß jetzt gerade nicht, was Du meinst. Edit: Ups: habe das alphabetisch übersehen...
Aber als Ergänzung: Über das Sternchenicon kann ich mich durch alle 3 Ansichtsmodi durchklicken und das funktioniert bei mir ohne Probleme. Sowohl im Expertenmodus, asl auch im "Dummy-Modus" (duck) :-)Wenns nicht geht, wie man will - muss mans tun, wie man kann. -
@thomas-braun sagte in Adapter werden nicht angezeigt:
Das dürfte dann nur aus optischen Gründen mit den ersten Adaptern alphabetisch ausgefüllt werden.
Ich weiß jetzt gerade nicht, was Du meinst. Edit: Ups: habe das alphabetisch übersehen...
Aber als Ergänzung: Über das Sternchenicon kann ich mich durch alle 3 Ansichtsmodi durchklicken und das funktioniert bei mir ohne Probleme. Sowohl im Expertenmodus, asl auch im "Dummy-Modus" (duck) :-)@wcag22 sagte in Adapter werden nicht angezeigt:
Ich weiß jetzt gerade nicht, was Du meinst.
Ich meine, das die Freifläche die sich auf deinem Bildschirm ergeben würde statt dessen mit den ersten nicht installierten Adaptern in alphabetischer Reihe aufgefüllt wird.
-
@wcag22 sagte in Adapter werden nicht angezeigt:
Ich weiß jetzt gerade nicht, was Du meinst.
Ich meine, das die Freifläche die sich auf deinem Bildschirm ergeben würde statt dessen mit den ersten nicht installierten Adaptern in alphabetischer Reihe aufgefüllt wird.
@thomas-braun sagte in Adapter werden nicht angezeigt:
@wcag22 sagte in Adapter werden nicht angezeigt:
Ich weiß jetzt gerade nicht, was Du meinst.
Ich meine, das die Freifläche die sich auf deinem Bildschirm ergeben würde statt dessen mit den ersten nicht installierten Adaptern in alphabetischer Reihe aufgefüllt wird.
Na, das glaube ich weniger. Denn egal wie groß der viewport ist, es bleibt bei den 27 + 24 Adaptern.
Und ja: die 24 Adapter sind alphabetisch angeordnet...Aber ehrlich: Das ist mir gerade auch sowas von egal :-)
Edit / Ergänzung.
An der Anzahl der angezeigten Adapter ändert auch ein Zoom der Browseransicht nix. Sieht man auch auf dem Bild. -
@wcag22 sagte in Adapter werden nicht angezeigt:
27 Adapter installiert, dann folgen in der Kachelansicht weitere NICHT installierte Adapter
Wie viele werden denn da noch angezeigt?
@thomas-braun said in Adapter werden nicht angezeigt:
@wcag22 sagte in Adapter werden nicht angezeigt:
27 Adapter installiert, dann folgen in der Kachelansicht weitere NICHT installierte Adapter
Wie viele werden denn da noch angezeigt?
Ja es sind bei mir auch 51 Kacheln.
Offensichtlich stimmt die Zahl 100 in den Releasenotes nicht. Oder es ist ein Bug in Admin.
Wenn da mehr als 50 installierte Adapter existieren scheinen keine nicht installierten Adapter angezeigt zu werden ...Edit:
Wenn ich in die Listenansicht gehe sind es ohne Kathegorien auch nur 51.
Wenn ich aber in die Kategorienansicht gehe und alle aufklappe habe ich alle.Irgendwie inkonsitent. ZUmindest in der Listenansicht sollen immer alle angezeigt werden. Bei den Kacheln kann ich ja noch verstehen dass das ein so großes "Fenster" würde dass es zu Problemen kommt. In der Listenansicht ist das definitiv nicht der Fall. Und der früher genannte Hinweis auf die Serverlast ist für mich nicht nachvollziehbar da alle Daten zur Anzeige lokal am System liegen.
Muss zustimmen - hier wurde verschlimmbessert.
Edit:
Ich hab issue erstellt:
https://github.com/ioBroker/ioBroker.admin/issues/2628Bitte gerne kommentieren / voten etc.
Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer Danke sagen will, kann nen Kaffee spendieren: https://paypal.me/mcm1957atiobroker
-
@thomas-braun said in Adapter werden nicht angezeigt:
@wcag22 sagte in Adapter werden nicht angezeigt:
27 Adapter installiert, dann folgen in der Kachelansicht weitere NICHT installierte Adapter
Wie viele werden denn da noch angezeigt?
Ja es sind bei mir auch 51 Kacheln.
Offensichtlich stimmt die Zahl 100 in den Releasenotes nicht. Oder es ist ein Bug in Admin.
Wenn da mehr als 50 installierte Adapter existieren scheinen keine nicht installierten Adapter angezeigt zu werden ...Edit:
Wenn ich in die Listenansicht gehe sind es ohne Kathegorien auch nur 51.
Wenn ich aber in die Kategorienansicht gehe und alle aufklappe habe ich alle.Irgendwie inkonsitent. ZUmindest in der Listenansicht sollen immer alle angezeigt werden. Bei den Kacheln kann ich ja noch verstehen dass das ein so großes "Fenster" würde dass es zu Problemen kommt. In der Listenansicht ist das definitiv nicht der Fall. Und der früher genannte Hinweis auf die Serverlast ist für mich nicht nachvollziehbar da alle Daten zur Anzeige lokal am System liegen.
Muss zustimmen - hier wurde verschlimmbessert.
Edit:
Ich hab issue erstellt:
https://github.com/ioBroker/ioBroker.admin/issues/2628Bitte gerne kommentieren / voten etc.
-
@thomas-braun said in Adapter werden nicht angezeigt:
@wcag22 sagte in Adapter werden nicht angezeigt:
27 Adapter installiert, dann folgen in der Kachelansicht weitere NICHT installierte Adapter
Wie viele werden denn da noch angezeigt?
Ja es sind bei mir auch 51 Kacheln.
Offensichtlich stimmt die Zahl 100 in den Releasenotes nicht. Oder es ist ein Bug in Admin.
Wenn da mehr als 50 installierte Adapter existieren scheinen keine nicht installierten Adapter angezeigt zu werden ...Edit:
Wenn ich in die Listenansicht gehe sind es ohne Kathegorien auch nur 51.
Wenn ich aber in die Kategorienansicht gehe und alle aufklappe habe ich alle.Irgendwie inkonsitent. ZUmindest in der Listenansicht sollen immer alle angezeigt werden. Bei den Kacheln kann ich ja noch verstehen dass das ein so großes "Fenster" würde dass es zu Problemen kommt. In der Listenansicht ist das definitiv nicht der Fall. Und der früher genannte Hinweis auf die Serverlast ist für mich nicht nachvollziehbar da alle Daten zur Anzeige lokal am System liegen.
Muss zustimmen - hier wurde verschlimmbessert.
Edit:
Ich hab issue erstellt:
https://github.com/ioBroker/ioBroker.admin/issues/2628Bitte gerne kommentieren / voten etc.
@mcm1957 wenn ich das richtig sehe, ist die Zahl bei "Es gibt weitere xxx Adapter" auch falsch.
Das scheint die Gesamtanzahl zu sein, ohne die installierten abgezogen zu haben.kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
751
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge