[Adapter] cloudfreie Auslesung von Deye-Invertern

Meintre 0

Hallo,

habe mal ne Frage: Kann man die Daten "SmartLoad-Einrichtung" beim Deye 12K-SGO$lP3-EU auch auslesen bzw ändern über iobroker?

Ich habe einen Senec mit 7,5kWh Batterie un 9,5 kWp Platten und diesen Deye mit 12,5 kWh Batterie und 3 kWp Platten.
Unter "SmartLoad-Einrichtung" -> habe ich "Micinv Input" eingestellt, um den Überschuss in die Deye Batterie zu laden. Funktioniert auch tadellos.
Doch wenn die Sonne weg ist und der Senec die Energie aus der Batterie nimmt, dann lädt auch der Deye seine Batterie vom Senec.
Wenn ich also zeitlich "SmartLoad-Einrichtung" -> auf zB. "Generator Input" umstellen könnte, wäre das Problem gelöst.
Wie kann man noch andere Register auslesen mit dem Adapter Deyeidc?

Vielen Dank im Voraus

Meintre

Rene55

@meintre-0 Sorry, keine Ahnung. Vllt. jemand anderes.

Gukerl

Guten Morgen,

ich habe einen Eintrag geändert. Das Speichern (und schließen) kein Problem, aber beim Anzeigen der Objekte erscheint folgendes im Log als Warnung:

deyeidc has an invalid jsonConfig: [{"instancePath":"/items/_coils/items/coils/items/1","schemaPath":"#/items/allOf/17/then/additionalProperties","keyword":"additionalProperties","params":{"additionalProperty":"trim"},"message":"must NOT have additional properties"},{"instancePath":"/items/_coils/items/coils","schemaPath":"#/patternProperties/%5E.%2B/allOf/25/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"},{"instancePath":"/items/_coils","schemaPath":"#/properties/items/patternProperties/%5E.%2B/allOf/8/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"},{"instancePath":"","schemaPath":"#/if","keyword":"if","params":{"failingKeyword":"then"},"message":"must match \"then\" schema"}]

mcm1957

Welche Version des Adapters hast du installiert?

Gukerl

@mcm1957
0.0.14
Ich habs direkt aus den iObroker Adaptern.

Danke, Andi

ilovegym

@gukerl

das ist aktuell, und welche Version von Admin und js-controller?

mcm1957

@gukerl
A) Du kannst die Info mal ignorieren. Funktion ist dadurch nicht beeinflusst.

B) Die Meldung stammt von einem Fehler im Adapter jsonConfig.json. Die ist auf Githubvdefiniziv schon behoben und sollte vom zeitlichen Ablauf her auch in 0.0.14 schon drinnen sein.

Ich oder der Dev werden das zeitnahe mal prüfen. Wenn du magst erstell bitte ein Issue beim Adapter.

mcm1957

I registered a issue at adapter repo

https://github.com/raschy/ioBroker.deyeidc/issues/111

mcm1957 created this issue in raschy/ioBroker.deyeidc

closed deyeidc has an invalid jsonConfig #111

Rene55

@gukerl Diese Warnung ist bekannt und wird schnellstmöglich abgestellt.

ilovegym

@rene55

ok, kann ich unter Admin 7.0.17 und js-controller 6.0.9 nicht nachvollziehen. Daher dachte ich, es liegt auch evt. daran..?

mcm1957

@ilovegym said in [Adapter] cloudfreie Auslesung von Deye-Invertern:

@rene55

ok, kann ich unter Admin 7.0.17 und js-controller 6.0.9 nicht nachvollziehen. Daher dachte ich, es liegt auch evt. daran..?

Wundert mich eigentlich. Der Fehler ist in der offiziellen (npm) Version definitiv drinnen. In der GH Version ist's schon korrigiert.. Der Fehler tritt nur auf, wenn du das Admin UI öffnest.

Aber im Kern kümmert sich Rene eh schon drum. Ist also alles im grünen Bereich. DANKE fürs mithelfen bzw fürs Fixen

ilovegym

@rene55

Hi,
habe heute Version 0.0.15 installiert, leider hat die Probleme mit den Registern, habe 5 Instanzen, bei allen das gleiche, der Adapter startet, und wenn er Daten holen moechte, kommt das:

2024-07-29 18:04:13.167  - error: deyeidc.1 (15766) TypeError: Cannot read properties of undefined (reading 'register') | TypeError: Cannot read properties of undefined (reading 'register')
    at Deyeidc.onData (/opt/iobroker/node_modules/iobroker.deyeidc/main.js:166:11)
    at Socket.<anonymous> (/opt/iobroker/node_modules/iobroker.deyeidc/main.js:152:10)
    at Socket.emit (node:events:520:28)
    at addChunk (node:internal/streams/readable:559:12)
    at readableAddChunkPushByteMode (node:internal/streams/readable:510:3)
    at Readable.push (node:internal/streams/readable:390:5)
    at TCP.onStreamRead (node:internal/stream_base_commons:191:23)
2024-07-29 18:04:17.245  - info: host.iobroker "system.adapter.deyeidc.4" disabled
2024-07-29 18:04:17.245  - info: host.iobroker stopInstance system.adapter.deyeidc.4 (force=false, process=true)
2024-07-29 18:04:17.251  - info: host.iobroker stopInstance system.adapter.deyeidc.4 send kill signal
2024-07-29 18:04:17.251  - info: deyeidc.4 (15848) Got terminate signal TERMINATE_YOURSELF
2024-07-29 18:04:17.253  - info: deyeidc.4 (15848) terminating
2024-07-29 18:04:17.254  - info: deyeidc.4 (15848) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-07-29 18:04:17.755  - info: deyeidc.4 (15848) terminating
2024-07-29 18:04:17.807  - info: host.iobroker instance system.adapter.deyeidc.4 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

Zurueck auf 0.0.14 und alles ist gut...

System: Buanet Docker 10.0.0.1-Node22 - js-controller 6.0.9 - Admin 7.0.21

Rene55

@ilovegym Danke für den Test. Ich hab den Adapter gestern abend mal frisch installiert - lief. Hab wohl nur eine Instanz, sollte aber nicht den Fehler ausmachen.

ilovegym

@rene55

Das war vielleicht der unterschied, du hast frisch installiert und ich hab mit der bestehenden Config n Update gemacht..?

Da der Fehler bei den Registern liegt.. vielleicht hab ich da was falsches drin?
Oder er bekommt n Wert der nicht passt..?

Hier die config

Rene55

@ilovegym Das ist unwahrscheinlich, die hat es ja vorher auch getan. Strukturelle Änderungen gab es keine.
Hast du mal nur die eine Instanz [0] versucht?

ilovegym

@rene55

Ja, der Fehler tritt nach den 60sek auf..

Rene55

@ilovegym Ich kann aus dem ersten Screenshot nicht wirklich was erkennen. Hast du mal die Logstufe auf debug gesetzt?

ilovegym

@rene55

Ok, mach ich morgen Abend… vielleicht hat ja noch einer den Fehler..

JB_Sullivan

Habe heute auch die 0.15 aufgespielt und danach diese Meldung erhalten. Die DP`s scheinen aber sonst wie gehabt zu funktionieren.

	12844	2024-07-30 18:01:49.461	error	TypeError: Cannot read properties of undefined (reading 'register') | TypeError: Cannot read properties of undefined (reading 'register') at Deyeidc.onData (C:\ioBroker\GLT\node_modules\iobroker.deyeidc\main.js:166:11) at Socket.<anonymous> (C:\ioBroker\GLT\node_modules\iobroker.deyeidc\main.js:152:10) at Socket.emit (node:events:519:28) at addChunk (node:internal/streams/readable:559:12) at readableAddChunkPushByteMode (node:internal/streams/readable:510:3) at Readable.push (node:internal/streams/readable:390:5) at TCP.onStreamRead (node:internal/stream_base_commons:191:23)

deyeidc.0

ilovegym

@rene55

Hab nochmal geupdated, hier das komplette log:

2024-07-30 19:34:01.818  - info: deyeidc.0 (27892) Got terminate signal TERMINATE_YOURSELF
2024-07-30 19:34:01.821  - info: deyeidc.0 (27892) terminating
2024-07-30 19:34:01.822  - info: deyeidc.0 (27892) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-07-30 19:34:02.323  - info: deyeidc.0 (27892) terminating
2024-07-30 19:34:02.364  - info: host.iobroker instance system.adapter.deyeidc.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-07-30 19:34:03.616  - error: deyeidc.1 (27898) TypeError: Cannot read properties of undefined (reading 'register') | TypeError: Cannot read properties of undefined (reading 'register')
    at Deyeidc.onData (/opt/iobroker/node_modules/iobroker.deyeidc/main.js:166:11)
    at Socket.<anonymous> (/opt/iobroker/node_modules/iobroker.deyeidc/main.js:152:10)
    at Socket.emit (node:events:520:28)
    at addChunk (node:internal/streams/readable:559:12)
    at readableAddChunkPushByteMode (node:internal/streams/readable:510:3)
    at Readable.push (node:internal/streams/readable:390:5)
    at TCP.onStreamRead (node:internal/stream_base_commons:191:23)
2024-07-30 19:34:05.743  - info: host.iobroker instance system.adapter.deyeidc.0 in version "0.0.15" started with pid 28018
2024-07-30 19:34:06.049  - info: tr-064.0 (14051) {"NewTotalNumberSyncGroups":"2","NewSyncGroupName":"sync_dsl","NewSyncGroupMode":"VDSL","Newmax_ds":"13258125","Newmax_us":"5185625","Newds_current_bps":"1601157,1750389,763912,1670101,1740643,1314488,1035425,1571816,1567295,1601588,1011045,1394843,1451758,1807280,531676,1771570,1705223,1298708,1044933,1522909","Newmc_current_bps":"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0","Newus_current_bps":"45351,53297,27920,41739,58945,27807,42143,39223,48087,54020,42618,33404,45628,58028,32142,51254,48672,22736,41801,43259","Newprio_realtime_bps":"4099,12227,2885,7778,18734,3522,1754,1541,7413,10505,4256,3176,5461,20468,3666,7773,7709,2165,601,4247","Newprio_high_bps":"39288,39646,19089,33012,39310,20130,38469,36282,33646,29000,37725,29695,39099,36477,25972,43064,40081,18365,40277,37998","Newprio_default_bps":"1964,1424,5946,949,901,4155,1920,1400,7028,14515,637,533,1068,1083,2504,417,882,2206,923,1014","Newprio_low_bps":"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"}
2024-07-30 19:34:06.548  - debug: deyeidc.0 (28018) Redis Objects: Use Redis connection: 10.10.2.10:6379
2024-07-30 19:34:06.575  - debug: deyeidc.0 (28018) Objects client ready ... initialize now
2024-07-30 19:34:06.576  - debug: deyeidc.0 (28018) Objects create System PubSub Client
2024-07-30 19:34:06.578  - debug: deyeidc.0 (28018) Objects create User PubSub Client
2024-07-30 19:34:06.832  - debug: deyeidc.0 (28018) Objects client initialize lua scripts
2024-07-30 19:34:06.840  - debug: deyeidc.0 (28018) Objects connected to redis: 10.10.2.10:6379
2024-07-30 19:34:06.858  - debug: deyeidc.0 (28018) Redis States: Use Redis connection: 10.10.2.10:6379
2024-07-30 19:34:06.864  - debug: deyeidc.0 (28018) States create System PubSub Client
2024-07-30 19:34:06.865  - debug: deyeidc.0 (28018) States create User PubSub Client
2024-07-30 19:34:06.871  - debug: deyeidc.0 (28018) States connected to redis: 10.10.2.10:6379
2024-07-30 19:34:07.443  - info: deyeidc.0 (28018) starting. Version 0.0.15 in /opt/iobroker/node_modules/iobroker.deyeidc, node: v22.5.1, js-controller: 6.0.9
2024-07-30 19:34:07.469  - debug: deyeidc.0 (28018) IP address [10.1.1.100] seems to be valid.
2024-07-30 19:34:07.470  - info: deyeidc.0 (28018) Retrieving data from the inverter will be done every 60 seconds
2024-07-30 19:34:07.470  - debug: deyeidc.0 (28018) checkUserData is ready
2024-07-30 19:34:07.470  - debug: deyeidc.0 (28018) try to connect . . .
2024-07-30 19:34:07.477  - debug: deyeidc.0 (28018) Connected to server
2024-07-30 19:34:07.650  - debug: deyeidc.0 (28018) Response: {"register":1,"modbus":{"type":"Buffer","data":[1,3,44,0,4,1,0,2,1,50,50,48,50,50,52,49,52,56,56,0,1,0,0,18,12,7,0,0,0,1,18,2,7,0,0,11,184,0,0,1,1,0,75,0,0,0,60,59]}}
2024-07-30 19:34:08.243  - debug: deyeidc.0 (28018) Response: {"register":2,"modbus":{"type":"Buffer","data":[1,3,64,0,4,0,13,0,0,0,0,20,106,0,0,0,13,0,0,0,0,0,0,20,106,0,0,0,0,0,0,9,46,0,0,0,0,0,0,0,0,0,0,19,136,0,0,0,0,0,0,0,0,0,0,0,0,6,54,0,0,0,0,0,0,21,54,117]}}
2024-07-30 19:34:08.469  - debug: deyeidc.0 (28018) Response: {"register":3,"modbus":{"type":"Buffer","data":[1,3,8,1,97,0,45,0,0,0,0,136]}}
2024-07-30 19:34:08.564  - debug: deyeidc.0 (28018) Response: {"register":4,"modbus":{"type":"Buffer","data":[1,3,8,10,190,7,8,20,80,18,142,34]}}
2024-07-30 19:34:08.579  - debug: deyeidc.0 (28018) Data reception for 4 registersets completed
2024-07-30 19:34:08.580  - debug: deyeidc.0 (28018) [computeData]  {"value1":"DV1","value2":"DC1","key":"DP1","name":"DC Power PV1","unit":"W","factor":0,"values":"DV1*DC1"}
2024-07-30 19:34:08.581  - debug: deyeidc.0 (28018) [computeData]  {"value1":"DV2","value2":"DC2","key":"DP2","name":"DC Power PV2","unit":"W","factor":0,"values":"DV2*DC2"}
2024-07-30 19:34:08.581  - debug: deyeidc.0 (28018) [computeData] ResultJson: [{"key":"DP1","value":"158.85","unit":"W","name":"DC Power PV1"},{"key":"DP2","value":"0.00","unit":"W","name":"DC Power PV2"}]
2024-07-30 19:34:08.600  - debug: deyeidc.0 (28018) [watchStates] set to Power_Set
2024-07-30 19:34:09.059  - info: tuya.0 (10496) bf51aaad135aa1ced0dhmw: Error on Reconnect (5): connect EHOSTUNREACH 10.1.12.101:6668
2024-07-30 19:34:10.353  - info: influxdb.0 (7447) Store 1001 buffered influxDB history points
2024-07-30 19:34:12.050  - info: tr-064.0 (14051) {"NewTotalNumberSyncGroups":"2","NewSyncGroupName":"sync_dsl","NewSyncGroupMode":"VDSL","Newmax_ds":"13258125","Newmax_us":"5185625","Newds_current_bps":"1523785,1601157,1750389,763912,1670101,1740643,1314488,1035425,1571816,1567295,1601588,1011045,1394843,1451758,1807280,531676,1771570,1705223,1298708,1044933","Newmc_current_bps":"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0","Newus_current_bps":"49992,45351,53297,27920,41739,58945,27807,42143,39223,48087,54020,42618,33404,45628,58028,32142,51254,48672,22736,41801","Newprio_realtime_bps":"10254,4099,12227,2885,7778,18734,3522,1754,1541,7413,10505,4256,3176,5461,20468,3666,7773,7709,2165,601","Newprio_high_bps":"38753,39288,39646,19089,33012,39310,20130,38469,36282,33646,29000,37725,29695,39099,36477,25972,43064,40081,18365,40277","Newprio_default_bps":"985,1964,1424,5946,949,901,4155,1920,1400,7028,14515,637,533,1068,1083,2504,417,882,2206,923","Newprio_low_bps":"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"}
2024-07-30 19:34:18.052  - info: tr-064.0 (14051) {"NewTotalNumberSyncGroups":"2","NewSyncGroupName":"sync_dsl","NewSyncGroupMode":"VDSL","Newmax_ds":"13258125","Newmax_us":"5185625","Newds_current_bps":"921663,1523785,1601157,1750389,763912,1670101,1740643,1314488,1035425,1571816,1567295,1601588,1011045,1394843,1451758,1807280,531676,1771570,1705223,1298708","Newmc_current_bps":"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0","Newus_current_bps":"27837,49992,45351,53297,27920,41739,58945,27807,42143,39223,48087,54020,42618,33404,45628,58028,32142,51254,48672,22736","Newprio_realtime_bps":"3840,10254,4099,12227,2885,7778,18734,3522,1754,1541,7413,10505,4256,3176,5461,20468,3666,7773,7709,2165","Newprio_high_bps":"21802,38753,39288,39646,19089,33012,39310,20130,38469,36282,33646,29000,37725,29695,39099,36477,25972,43064,40081,18365","Newprio_default_bps":"2195,985,1964,1424,5946,949,901,4155,1920,1400,7028,14515,637,533,1068,1083,2504,417,882,2206","Newprio_low_bps":"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"}
2024-07-30 19:34:19.827  - info: tuya.0 (10496) bf36cda59741f65a3evbfd: Error on Reconnect (7): connect EHOSTUNREACH 10.1.5.86:6668
2024-07-30 19:34:21.228  - info: linux-control.0 (2133) getting data from Influxdb (10.1.1.4:22)
2024-07-30 19:34:22.803  - info: tuya.0 (10496) bf36cda59741f65a3evbfd: Connect locally to device
2024-07-30 19:34:22.803  - info: tuya.0 (10496) bf36cda59741f65a3evbfd Init with IP=10.1.5.86, Key=Y''bS^'ldE@_g'}d, Version=3.3
2024-07-30 19:34:22.833  - info: tuya.0 (10496) bf36cda59741f65a3evbfd: Error on Reconnect (1): connect EHOSTUNREACH 10.1.5.86:6668
2024-07-30 19:34:24.017  - info: host.iobroker instance system.adapter.oilfox.0 in version "4.3.0" started with pid 28087
2024-07-30 19:34:24.432  - info: tr-064.0 (14051) {"NewTotalNumberSyncGroups":"2","NewSyncGroupName":"sync_dsl","NewSyncGroupMode":"VDSL","Newmax_ds":"13258125","Newmax_us":"5185625","Newds_current_bps":"1817837,921663,1523785,1601157,1750389,763912,1670101,1740643,1314488,1035425,1571816,1567295,1601588,1011045,1394843,1451758,1807280,531676,1771570,1705223","Newmc_current_bps":"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0","Newus_current_bps":"47909,27837,49992,45351,53297,27920,41739,58945,27807,42143,39223,48087,54020,42618,33404,45628,58028,32142,51254,48672","Newprio_realtime_bps":"1609,3840,10254,4099,12227,2885,7778,18734,3522,1754,1541,7413,10505,4256,3176,5461,20468,3666,7773,7709","Newprio_high_bps":"45132,21802,38753,39288,39646,19089,33012,39310,20130,38469,36282,33646,29000,37725,29695,39099,36477,25972,43064,40081","Newprio_default_bps":"1168,2195,985,1964,1424,5946,949,901,4155,1920,1400,7028,14515,637,533,1068,1083,2504,417,882","Newprio_low_bps":"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"}
2024-07-30 19:34:25.255  - info: linux-control.0 (2133) successful received data from Influxdb (10.1.1.4:22)
2024-07-30 19:34:26.003  - info: oilfox.0 (28087) starting. Version 4.3.0 in /opt/iobroker/node_modules/iobroker.oilfox, node: v22.5.1, js-controller: 6.0.9
2024-07-30 19:34:27.653  - info: oilfox.0 (28087) Terminated (NO_ERROR): Without reason
2024-07-30 19:34:28.179  - info: host.iobroker instance system.adapter.oilfox.0 having pid 28087 terminated with code 0 (NO_ERROR)
2024-07-30 19:34:30.046  - info: tr-064.0 (14051) {"NewTotalNumberSyncGroups":"2","NewSyncGroupName":"sync_dsl","NewSyncGroupMode":"VDSL","Newmax_ds":"13258125","Newmax_us":"5185625","Newds_current_bps":"1492501,1817837,921663,1523785,1601157,1750389,763912,1670101,1740643,1314488,1035425,1571816,1567295,1601588,1011045,1394843,1451758,1807280,531676,1771570","Newmc_current_bps":"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0","Newus_current_bps":"52177,47909,27837,49992,45351,53297,27920,41739,58945,27807,42143,39223,48087,54020,42618,33404,45628,58028,32142,51254","Newprio_realtime_bps":"14472,1609,3840,10254,4099,12227,2885,7778,18734,3522,1754,1541,7413,10505,4256,3176,5461,20468,3666,7773","Newprio_high_bps":"36303,45132,21802,38753,39288,39646,19089,33012,39310,20130,38469,36282,33646,29000,37725,29695,39099,36477,25972,43064","Newprio_default_bps":"1402,1168,2195,985,1964,1424,5946,949,901,4155,1920,1400,7028,14515,637,533,1068,1083,2504,417","Newprio_low_bps":"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"}
2024-07-30 19:34:33.132  - error: deyeidc.0 (28018) TypeError: Cannot read properties of undefined (reading 'register') | TypeError: Cannot read properties of undefined (reading 'register')
    at Deyeidc.onData (/opt/iobroker/node_modules/iobroker.deyeidc/main.js:166:11)
    at Socket.<anonymous> (/opt/iobroker/node_modules/iobroker.deyeidc/main.js:152:10)
    at Socket.emit (node:events:520:28)
    at addChunk (node:internal/streams/readable:559:12)
    at readableAddChunkPushByteMode (node:internal/streams/readable:510:3)
    at Readable.push (node:internal/streams/readable:390:5)
    at TCP.onStreamRead (node:internal/stream_base_commons:191:23)
^C

Auch die Instanzen geloescht, dann nur eine neu angelegt, die Konfig importiert, aber gleicher Fehler...
Also wenn das Nachvollziehbar ist, dann sollte der Fehler doch zu finden sein.. ?

NEWS

[Adapter] cloudfreie Auslesung von Deye-Invertern

ich habe einen Eintrag geändert. Das Speichern (und schließen) kein Problem, aber beim Anzeigen der Objekte erscheint folgendes im Log als Warnung:

closed deyeidc has an invalid jsonConfig #111

Support us

1.3k
Online

30.6k
Users

77.2k
Topics

1.2m
Posts

NEWS

[Adapter] cloudfreie Auslesung von Deye-Invertern

ich habe einen Eintrag geändert. Das Speichern (und schließen) kein Problem, aber beim Anzeigen der Objekte erscheint folgendes im Log als Warnung:

closed deyeidc has an invalid jsonConfig #111

Support us

1.3kOnline

30.6kUsers

77.2kTopics

1.2mPosts

1.3k
Online

30.6k
Users

77.2k
Topics

1.2m
Posts