NPM komplettes Update machen?

mooly

Ja, das stimmt wohl.

pi@raspberrypi:/opt/iobroker $ node -v
node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node)

18.19.0 hat nicht funktioniert, gleicher Fehler.

ioBroker nodejs fixer 2024-05-23
You requested to install latest version from nodejs v18 tree.

Your current setup is:
nodejs: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by nodejs)
/usr/bin/nodejs 	
node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node)
/usr/bin/node 		
node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node)
/usr/bin/npm 		
node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node)
/usr/bin/npx 		
node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node)
/usr/bin/corepack 	
nodejs: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by nodejs)
node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node)
node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node)
node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node)

We found these nodejs versions available for installation:

nodejs:
  Installed: 20.14.0-1nodesource1
  Candidate: 20.14.0-1nodesource1
  Version table:
 *** 20.14.0-1nodesource1 100
        100 /var/lib/dpkg/status
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages



Nothing to do - Your installation is using the correct paths.
node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node)

You are running nodejs . Do you want to install latest version from nodejs v.18 tree?

@Thomas-Braun er scheint die alte Version nicht zu installieren...

Homoran

@mooly sagte in NPM komplettes Update machen?:

Hab ich jetzt das ganze System zerschossen...

@homoran sagte in NPM komplettes Update machen?:

was sagt iob diag in der Langfassung?

damit wüssten wir deutlich mehr.

Thomas Braun

@mooly

Dann was aktuelles installieren, mit deinem Backup umziehen.

mooly

@homoran

======== Start marking the full check here =========

Skript v.2024-05-22

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.103-v7l+
      Architecture: arm

Model		: Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : 32 bit

Systemuptime and Load:
 14:52:03 up 2 min,  1 user,  load average: 3.02, 1.11, 0.41
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Thu 2024-06-20 14:52:03 CEST
           Universal time: Thu 2024-06-20 12:52:03 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** Display-Server-Setup ***
Display-Server: false
Desktop: 	
Terminal: 	tty
Boot Target: 	graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           3.8G        1.3G        1.8G        8.0M        672M        2.3G
Swap:           99M          0B         99M
Total:         3.9G        1.3G        1.9G

Active iob-Instances: 	15

         3837 M total memory
         1342 M used memory
          214 M active memory
         1666 M inactive memory
         1822 M free memory
          115 M buffer memory
          557 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

*** top - Table Of Processes  ***
top - 14:52:04 up 2 min,  1 user,  load average: 3.02, 1.11, 0.41
Tasks: 162 total,   5 running, 157 sleeping,   0 stopped,   0 zombie
%Cpu(s): 68.5 us, 12.3 sy,  0.0 ni, 17.8 id,  0.0 wa,  0.0 hi,  1.4 si,  0.0 st
MiB Mem :   3837.7 total,   1797.7 free,   1367.4 used,    672.6 buff/cache
MiB Swap:    100.0 total,    100.0 free,      0.0 used.   2310.0 avail Mem 

*** FAILED SERVICES ***

  UNIT            LOAD   ACTIVE SUB    DESCRIPTION          
* lightdm.service loaded failed failed Light Display Manager

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      110G   17G   89G  16% /
devtmpfs       devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     1.9G  8.5M  1.9G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/sda1      vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     384M     0  384M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Jun 20 14:49:59 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:14:A2:2C vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=a372f35c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Thu Jun 20 14:50:01 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[Thu Jun 20 14:50:01 2024] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Thu Jun 20 14:50:02 2024] EXT4-fs (sda2): re-mounted. Opts: (null)

Show mounted filesystems:
TARGET                                SOURCE     FSTYPE     OPTIONS
/                                     /dev/sda2  ext4       rw,noatime
|-/dev                                devtmpfs   devtmpfs   rw,relatime,size=1800056k,nr_inodes=84157,mode=755
| |-/dev/shm                          tmpfs      tmpfs      rw,nosuid,nodev
| |-/dev/pts                          devpts     devpts     rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| `-/dev/mqueue                       mqueue     mqueue     rw,relatime
|-/sys                                sysfs      sysfs      rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security              securityfs securityfs rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup                    tmpfs      tmpfs      ro,nosuid,nodev,noexec,mode=755
| | |-/sys/fs/cgroup/unified          cgroup2    cgroup2    rw,nosuid,nodev,noexec,relatime,nsdelegate
| | |-/sys/fs/cgroup/systemd          cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,xattr,name=systemd
| | |-/sys/fs/cgroup/cpu,cpuacct      cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,cpu,cpuacct
| | |-/sys/fs/cgroup/cpuset           cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,cpuset
| | |-/sys/fs/cgroup/net_cls,net_prio cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,net_cls,net_prio
| | |-/sys/fs/cgroup/blkio            cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,blkio
| | |-/sys/fs/cgroup/perf_event       cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,perf_event
| | |-/sys/fs/cgroup/freezer          cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,freezer
| | |-/sys/fs/cgroup/devices          cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,devices
| | `-/sys/fs/cgroup/pids             cgroup     cgroup     rw,nosuid,nodev,noexec,relatime,pids
| |-/sys/fs/bpf                       none       bpf        rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/debug                 debugfs    debugfs    rw,relatime
| `-/sys/kernel/config                configfs   configfs   rw,relatime
|-/proc                               proc       proc       rw,relatime
| `-/proc/sys/fs/binfmt_misc          systemd-1  autofs     rw,relatime,fd=37,pgrp=1,timeout=0,minproto=5,maxproto=5,direct
|-/run                                tmpfs      tmpfs      rw,nosuid,nodev,mode=755
| |-/run/lock                         tmpfs      tmpfs      rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/rpc_pipefs                   sunrpc     rpc_pipefs rw,relatime
| `-/run/user/1000                    tmpfs      tmpfs      rw,nosuid,nodev,relatime,size=392984k,mode=700,uid=1000,gid=1000
`-/boot                               /dev/sda1  vfat       rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.5G	/var/
2.0G	/var/cache/apt/archives
2.0G	/var/cache/apt
2.0G	/var/cache
260M	/var/lib

Archived and active journals take up 8.0M in the file system.

/opt/iobroker/backups:
287M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
743M	/opt/iobroker/iobroker-data/
360M	/opt/iobroker/iobroker-data/files
204M	/opt/iobroker/iobroker-data/history
126M	/opt/iobroker/iobroker-data/backup-objects
57M	/opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
38M	/opt/iobroker/iobroker-data/files/iot.admin/static/js/main.3d563dc9.js.map
28M	/opt/iobroker/iobroker-data/objects.jsonl
22M	/opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map
13M	/opt/iobroker/iobroker-data/states.jsonl
9.6M	/opt/iobroker/iobroker-data/files/vis.0/WohnEss301022.png

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
/dev/serial/by-id/usb-EnOcean_GmbH_USB_300_DE_EO75C42C-if00-port0

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyUSB0



*** NodeJS-Installation ***

/usr/bin/nodejs 	v18.20.3
/usr/bin/node 		v18.20.3
/usr/bin/npm 		10.7.0
/usr/bin/npx 		10.7.0
/usr/bin/corepack 	0.28.0


nodejs:
  Installed: 18.20.3-1nodesource1
  Candidate: 18.20.3-1nodesource1
  Version table:
 *** 18.20.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.20.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.20.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller: 	6.0.5
admin: 		6.17.14
javascript: 	7.8.0

nodejs modules from github: 	0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.cloud.0                  : cloud                 : raspberrypi                              - disabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
  system.adapter.enocean.0                : enocean               : raspberrypi                              -  enabled
  system.adapter.eusec.0                  : eusec                 : raspberrypi                              -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypi                              -  enabled
  system.adapter.ham.0                    : ham                   : raspberrypi                              - disabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspberrypi                              -  enabled
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
  system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.opendtu.0                : opendtu               : raspberrypi                              -  enabled
+ system.adapter.pushover.0               : pushover              : raspberrypi                              -  enabled
  system.adapter.pvforecast.0             : pvforecast            : raspberrypi                              -  enabled
+ system.adapter.radar2.0                 : radar2                : raspberrypi                              -  enabled
+ system.adapter.scenes.0                 : scenes                : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1888, bind: 0.0.0.0
  system.adapter.tado.0                   : tado                  : raspberrypi                              -  enabled
+ system.adapter.tahoma.0                 : tahoma                : raspberrypi                              -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : raspberrypi                              -  enabled
  system.adapter.vis-google-fonts.0       : vis-google-fonts      : raspberrypi                              -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspberrypi                              -  enabled
  system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspberrypi                              -  enabled
  system.adapter.vis-map.0                : vis-map               : raspberrypi                              -  enabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : raspberrypi                              -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : raspberrypi                              -  enabled
  system.adapter.vis-weather.0            : vis-weather           : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.yahka.0                  : yahka                 : raspberrypi                              -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1888, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

Installed ioBroker-Instances
Used repository: beta
Adapter    "admin"        : 6.17.14  , installed 6.17.14
Adapter    "alexa2"       : 3.26.5   , installed 3.26.5
Adapter    "backitup"     : 3.0.5    , installed 2.11.0 [Updatable]
Adapter    "cloud"        : 5.0.1    , installed 4.4.1  [Updatable]
Adapter    "discovery"    : 4.5.0    , installed 4.4.0  [Updatable]
Adapter    "enocean"      : 0.9.3    , installed 0.9.3
Adapter    "eusec"        : 1.2.1    , installed 1.2.1
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "ham"          : 5.3.1    , installed 5.3.1
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "icons-mfd-svg": 1.2.0    , installed 1.2.0
Adapter    "iot"          : 3.3.0    , installed 3.2.2  [Updatable]
Adapter    "iqontrol"     : 2.3.0    , installed 2.3.0
Adapter    "javascript"   : 8.6.0    , installed 7.8.0  [Updatable]
Controller "js-controller": 6.0.5    , installed 6.0.5
Adapter    "mihome"       : 1.4.0    , installed 1.4.0
Adapter    "mihome-vacuum": 4.2.0    , installed 4.1.1  [Updatable]
Adapter    "mqtt"         : 5.2.0    , installed 5.2.0
Adapter    "nuki"         : 2.0.0    , installed 1.6.0  [Updatable]
Adapter    "nuki-extended": 2.7.0    , installed 2.7.0
Adapter    "opendtu"      : 1.0.1    , installed 1.0.1
Adapter    "pushover"     : 3.0.6    , installed 3.0.6
Adapter    "pvforecast"   : 2.9.1    , installed 2.9.1
Adapter    "radar2"       : 2.2.0    , installed 2.1.0  [Updatable]
Adapter    "ring"         : 5.0.10   , installed 5.0.10
Adapter    "scenes"       : 3.0.4    , installed 2.4.2  [Updatable]
Adapter    "shelly"       : 7.0.0    , installed 6.8.0  [Updatable]
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.0    , installed 6.6.0  [Updatable]
Adapter    "tado"         : 0.5.4    , installed 0.5.4
Adapter    "tahoma"       : 0.10.4   , installed 0.10.4
Adapter    "tankerkoenig" : 3.4.0    , installed 3.3.7  [Updatable]
Adapter    "tr-064"       : 4.3.0    , installed 4.2.18 [Updatable]
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-icontwo"  : 1.5.0    , installed 1.5.0
Adapter    "vis-inventwo" : 3.3.4    , installed 3.3.3  [Updatable]
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.0.12 [Updatable]
Adapter    "vis-map"      : 1.1.0    , installed 1.0.5  [Updatable]
Adapter    "vis-material-advanced": 1.7.4, installed 1.7.4
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.9    , installed 2.5.9
Adapter    "weatherunderground": 3.7.0, installed 3.6.0 [Updatable]
Adapter    "web"          : 6.2.6    , installed 6.2.3  [Updatable]
Adapter    "ws"           : 2.6.1    , installed 2.5.10 [Updatable]
Adapter    "yahka"        : 1.0.3    , installed 1.0.3
Adapter    "zigbee"       : 1.10.3   , installed 1.10.3

Objects and States
Please stand by - This may take a while
Objects: 	6795
States: 	5643

*** OS-Repositories and Updates ***
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Hit:3 https://repo.homebridge.io stable InRelease
Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:39793         0.0.0.0:*               LISTEN      1001       22982      1144/io.yahka.0     
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          17272      625/sshd            
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          16965      439/cupsd           
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       20193      940/io.mqtt.0       
tcp        0      0 127.0.0.1:34751         0.0.0.0:*               LISTEN      1001       22978      1144/io.yahka.0     
tcp        0      0 0.0.0.0:1888            0.0.0.0:*               LISTEN      1001       21698      960/io.shelly.0     
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       19732      613/iobroker.js-con 
tcp        0      0 127.0.0.1:38473         0.0.0.0:*               LISTEN      1001       23309      1144/io.yahka.0     
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       20777      613/iobroker.js-con 
tcp        0      0 127.0.0.1:41775         0.0.0.0:*               LISTEN      1001       23166      1144/io.yahka.0     
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       21089      710/io.admin.0      
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       22650      1064/io.web.0       
tcp6       0      0 :::38389                :::*                    LISTEN      1001       24210      1144/io.yahka.0     
tcp6       0      0 :::22                   :::*                    LISTEN      0          17274      625/sshd            
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          16964      439/cupsd           
tcp6       0      0 :::1984                 :::*                    LISTEN      1001       29129      2768/go2rtc         
tcp6       0      0 :::8581                 :::*                    LISTEN      116        19012      683/hb-service      
tcp6       0      0 :::51399                :::*                    LISTEN      116        19063      717/homebridge      
tcp6       0      0 :::8554                 :::*                    LISTEN      1001       29123      2768/go2rtc         
tcp6       0      0 :::8555                 :::*                    LISTEN      1001       29126      2768/go2rtc         
udp        0      0 0.0.0.0:43996           0.0.0.0:*                           1001       29045      1791/io.eusec.0     
udp        0      0 0.0.0.0:67              0.0.0.0:*                           1001       21600      893/io.radar2.0     
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          17043      612/dhcpcd          
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          17531      472/cups-browsed    
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           116        19064      717/homebridge      
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           116        19009      683/hb-service      
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        15689      418/avahi-daemon: r 
udp        0      0 0.0.0.0:60685           0.0.0.0:*                           108        15691      418/avahi-daemon: r 
udp        0      0 0.0.0.0:35679           0.0.0.0:*                           1001       29040      1791/io.eusec.0     
udp6       0      0 :::5353                 :::*                                108        15690      418/avahi-daemon: r 
udp6       0      0 :::58643                :::*                                108        15692      418/avahi-daemon: r 
udp6       0      0 :::8555                 :::*                                1001       29127      2768/go2rtc         

*** Log File - Last 25 Lines ***

2024-06-20 14:51:58.764  - info: host.raspberrypi instance system.adapter.vis-google-fonts.0 terminated while should be started once
2024-06-20 14:52:00.990  - info: iot.0 (1244) Connection changed: connect "pascal_pbennoit_de"
2024-06-20 14:52:01.369  - info: host.raspberrypi instance system.adapter.pvforecast.0 started with pid 2067
2024-06-20 14:52:01.733  - info: tado.0 (1508) starting. Version 0.5.4 in /opt/iobroker/node_modules/iobroker.tado, node: v18.20.3, js-controller: 6.0.5
2024-06-20 14:52:01.867  - info: tado.0 (1508) Started with JSON-Explorer version 0.1.15
2024-06-20 14:52:04.148  - info: tado.0 (1508) Connected to Tado cloud, initialyzing... 
2024-06-20 14:52:05.940  - info: host.raspberrypi instance system.adapter.enocean.0 started with pid 2313
2024-06-20 14:52:07.712  - info: vis-inventwo.0 (1769) starting. Version 3.3.3 in /opt/iobroker/node_modules/iobroker.vis-inventwo, node: v18.20.3, js-controller: 6.0.5
2024-06-20 14:52:08.078  - info: opendtu.0 (1794) starting. Version 1.0.1 in /opt/iobroker/node_modules/iobroker.opendtu, node: v18.20.3, js-controller: 6.0.5
2024-06-20 14:52:08.596  - info: eusec.0 (1791) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.eusec, node: v18.20.3, js-controller: 6.0.5
2024-06-20 14:52:09.044  - info: info.0 (1031) Reading network data every 3 seconds.
2024-06-20 14:52:09.147  - info: opendtu.0 (1794) Connect to OpenDTU over websocket connection.
2024-06-20 14:52:18.398  - info: eusec.0 (1791) Connected to station T8010P2322101A9A on host 192.168.0.24 and port 16267
2024-06-20 14:52:19.340  - info: enocean.0 (2313) starting. Version 0.9.3 in /opt/iobroker/node_modules/iobroker.enocean, node: v18.20.3, js-controller: 6.0.5
2024-06-20 14:52:19.429  - info: pvforecast.0 (2067) starting. Version 2.9.1 in /opt/iobroker/node_modules/iobroker.pvforecast, node: v18.20.3, js-controller: 6.0.5
2024-06-20 14:52:19.417  - error: eusec.0 (1791) Station: T8010P2322101A9A command CMD_SDINFO_EX failed with error: undefined (-148)
2024-06-20 14:52:20.116  - warn: enocean.0 (2313) An error occured at serial port: Error: Error Resource temporarily unavailable Cannot lock port
2024-06-20 14:52:20.358  - info: eusec.0 (1791) go2rtc started: 14:52:19.735 INF go2rtc version 1.8.5 linux/arm
14:52:19.738 INF [rtsp] listen addr=:8554
14:52:19.739 INF [api] listen addr=:1984
14:52:19.741 INF [webrtc] listen addr=:8555

2024-06-20 14:52:25.111  - info: tado.0 (1508) Initialisation finished, connected to Tado cloud service refreshing every 30 seconds
2024-06-20 14:52:28.793  - info: pvforecast.0 (2067) Starting internal update cron (every 15 Minutes) for timezone: Europe/Berlin
2024-06-20 14:52:32.628  - info: eusec.0 (1791) Push notification connection successfully established

============ Mark until here for C&P =============

iob diag has finished.

Press any key for a summary

Thomas Braun

@mooly sagte in NPM komplettes Update machen?:

*** NodeJS-Installation ***
/usr/bin/nodejs v18.20.3
/usr/bin/node v18.20.3
/usr/bin/npm 10.7.0
/usr/bin/npx 10.7.0
/usr/bin/corepack 0.28.0

Ist doch drin...

mooly

@thomas-braun

Das stellt mich vor ein großes Problem. Das habe ich so noch nie gemacht. Hätte ich das vorher gewusst...

Ich versuche es weiter.

Thomas Braun

@mooly

Ich weiß gar nicht wo dein Problem liegt...

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.

Objects type: jsonl
States type: jsonl

mooly

@thomas-braun

Ich kann aktuell nicht auf meine VIS bzw. Admin zugreifen. Ich vermute gerade ein anderes Problem...

Ich werde mich auf jeden Fall mal mit dem OS Update beschäftigen. Sorry für die Noob-Fragen. Ich danke euch sehr für eure Unterstützung.

Thomas Braun

@mooly sagte in NPM komplettes Update machen?:

Ich vermute gerade ein anderes Problem...

In dem iob diag sehe ich auch noch andere Probleme.

Thomas Braun

@mooly sagte in NPM komplettes Update machen?:

Ich werde mich auf jeden Fall mal mit dem OS Update beschäftigen.

Wirst du machen müssen. Der Buster wird nicht lebendiger. Steig von dem toten Pferd runter.

https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht

mooly

@thomas-braun

Klasse... vielen Dank!

crunchip

@mooly sagte in ioBroker komplett neu installieren (Argon ONE mit SSD):

dennoch ihr System aktuell halten wollen

@mooly sagte in NPM komplettes Update machen?:

Ich werde mich auf jeden Fall mal mit dem OS Update beschäftigen.

das ist allerdings ein Zitat aus Juni/2024

mooly

@crunchip

Was genau ist denn jetzt das Problem? Was willst du mir mitteilen?

Wenn du nichts konstruktives zum Thema beitragen kannst, sind auch diese Posts unnötig.

Homoran

@mooly was soll denn das jetzt?
Dieser Post von @crunchip wird aufgrund deines crosspostings mit https://forum.iobroker.net/topic/79539/iobroker-komplett-neu-installieren-argon-one-mit-ssd/1 entstanden sein und eine Frage nach der Aktualität der hier genannten Informationen.

Oder willst du keine Hilfe mehr?

crunchip

@mooly sagte in NPM komplettes Update machen?:

willst du mir mitteilen?

Wollte eigentlich im anderen Thread zitieren um die Informationen zu verbinden.

@mooly sagte in NPM komplettes Update machen?:

konstruktives zum Thema beitragen kannst

Hattest du bereits bekommen und nicht nachgegangen, somit nicht mein, sondern dein Problem

@mooly sagte in NPM komplettes Update machen?:

sind auch diese Posts unnötig.

Gut zu wissen und für solche Aussagen ist mir die Zeit zu schade.
Schöne Abend noch

mooly

@crunchip

Sah für mich eher danach aus, dass man sich daran belustigt, dass seit Juni nix passiert ist und ich erneut nach Unterstützung frage. Bin aber erleichtert, dass das anscheinend nicht der Fall ist.

Community Forum

NEWS

NPM komplettes Update machen?

Support us

903

32.5k

81.8k

1.3m