NPM komplettes Update machen?
-
Dein Problem ist, das du mit einem veralteten Betreibssyystem herumfährst. Das hat keinen TÜV mehr.
Ersetz das durch ein aktuelles Debain 12 'Bookworm'. -
Kann ich sonst nichts mehr machen? kann ich zurück auf version 18?
Ich muss mich damit beschäftigen wenn das jetzt in ein komplettes update ausartet... shitHab ich jetzt das ganze System zerschossen...
-
@mooly sagte in NPM komplettes Update machen?:
Hab ich jetzt das ganze System zerschossen...
Du hast das System durch deine Untätigkeit zerschossen. Buster ist schon geraume Zeit nicht mehr angezeigt gewesen.
iob nodejs-update 18Dann mit einem Backup von der Kiste auf was lebendiges umziehen...
-
Ja, das stimmt wohl.
pi@raspberrypi:/opt/iobroker $ node -v node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node)18.19.0 hat nicht funktioniert, gleicher Fehler.
ioBroker nodejs fixer 2024-05-23 You requested to install latest version from nodejs v18 tree. Your current setup is: nodejs: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by nodejs) /usr/bin/nodejs node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node) /usr/bin/node node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node) /usr/bin/npm node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node) /usr/bin/npx node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node) /usr/bin/corepack nodejs: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by nodejs) node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node) node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node) node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node) We found these nodejs versions available for installation: nodejs: Installed: 20.14.0-1nodesource1 Candidate: 20.14.0-1nodesource1 Version table: *** 20.14.0-1nodesource1 100 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Nothing to do - Your installation is using the correct paths. node: /usr/lib/arm-linux-gnueabihf/libstdc++.so.6: version `GLIBCXX_3.4.26' not found (required by node) You are running nodejs . Do you want to install latest version from nodejs v.18 tree?@Thomas-Braun er scheint die alte Version nicht zu installieren...
-
@mooly sagte in NPM komplettes Update machen?:
Hab ich jetzt das ganze System zerschossen...
@homoran sagte in NPM komplettes Update machen?:
was sagt iob diag in der Langfassung?
damit wüssten wir deutlich mehr.
-
Dann was aktuelles installieren, mit deinem Backup umziehen.
-
======== Start marking the full check here =========
Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : 32 bit Systemuptime and Load: 14:52:03 up 2 min, 1 user, load average: 3.02, 1.11, 0.41 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Thu 2024-06-20 14:52:03 CEST Universal time: Thu 2024-06-20 12:52:03 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.3G 1.8G 8.0M 672M 2.3G Swap: 99M 0B 99M Total: 3.9G 1.3G 1.9G Active iob-Instances: 15 3837 M total memory 1342 M used memory 214 M active memory 1666 M inactive memory 1822 M free memory 115 M buffer memory 557 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 14:52:04 up 2 min, 1 user, load average: 3.02, 1.11, 0.41 Tasks: 162 total, 5 running, 157 sleeping, 0 stopped, 0 zombie %Cpu(s): 68.5 us, 12.3 sy, 0.0 ni, 17.8 id, 0.0 wa, 0.0 hi, 1.4 si, 0.0 st MiB Mem : 3837.7 total, 1797.7 free, 1367.4 used, 672.6 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 2310.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * lightdm.service loaded failed failed Light Display Manager LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 110G 17G 89G 16% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 1.9G 8.5M 1.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/sda1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Jun 20 14:49:59 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:14:A2:2C vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=a372f35c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu Jun 20 14:50:01 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Thu Jun 20 14:50:01 2024] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Thu Jun 20 14:50:02 2024] EXT4-fs (sda2): re-mounted. Opts: (null) Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=1800056k,nr_inodes=84157,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,relatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup tmpfs tmpfs ro,nosuid,nodev,noexec,mode=755 | | |-/sys/fs/cgroup/unified cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate | | |-/sys/fs/cgroup/systemd cgroup cgroup rw,nosuid,nodev,noexec,relatime,xattr,name=systemd | | |-/sys/fs/cgroup/cpu,cpuacct cgroup cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct | | |-/sys/fs/cgroup/cpuset cgroup cgroup rw,nosuid,nodev,noexec,relatime,cpuset | | |-/sys/fs/cgroup/net_cls,net_prio cgroup cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio | | |-/sys/fs/cgroup/blkio cgroup cgroup rw,nosuid,nodev,noexec,relatime,blkio | | |-/sys/fs/cgroup/perf_event cgroup cgroup rw,nosuid,nodev,noexec,relatime,perf_event | | |-/sys/fs/cgroup/freezer cgroup cgroup rw,nosuid,nodev,noexec,relatime,freezer | | |-/sys/fs/cgroup/devices cgroup cgroup rw,nosuid,nodev,noexec,relatime,devices | | `-/sys/fs/cgroup/pids cgroup cgroup rw,nosuid,nodev,noexec,relatime,pids | |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,relatime | `-/sys/kernel/config configfs configfs rw,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=37,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/run tmpfs tmpfs rw,nosuid,nodev,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=392984k,mode=700,uid=1000,gid=1000 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.5G /var/ 2.0G /var/cache/apt/archives 2.0G /var/cache/apt 2.0G /var/cache 260M /var/lib Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 287M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 743M /opt/iobroker/iobroker-data/ 360M /opt/iobroker/iobroker-data/files 204M /opt/iobroker/iobroker-data/history 126M /opt/iobroker/iobroker-data/backup-objects 57M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.3d563dc9.js.map 28M /opt/iobroker/iobroker-data/objects.jsonl 22M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.c05ba1d3.js.map 13M /opt/iobroker/iobroker-data/states.jsonl 9.6M /opt/iobroker/iobroker-data/files/vis.0/WohnEss301022.png USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 /dev/serial/by-id/usb-EnOcean_GmbH_USB_300_DE_EO75C42C-if00-port0 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.3 /usr/bin/node v18.20.3 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.3-1nodesource1 Candidate: 18.20.3-1nodesource1 Version table: *** 18.20.3-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.5 admin: 6.17.14 javascript: 7.8.0 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.cloud.0 : cloud : raspberrypi - disabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.enocean.0 : enocean : raspberrypi - enabled system.adapter.eusec.0 : eusec : raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - enabled system.adapter.ham.0 : ham : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled + system.adapter.info.0 : info : raspberrypi - enabled system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 system.adapter.opendtu.0 : opendtu : raspberrypi - enabled + system.adapter.pushover.0 : pushover : raspberrypi - enabled system.adapter.pvforecast.0 : pvforecast : raspberrypi - enabled + system.adapter.radar2.0 : radar2 : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1888, bind: 0.0.0.0 system.adapter.tado.0 : tado : raspberrypi - enabled + system.adapter.tahoma.0 : tahoma : raspberrypi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - enabled system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - enabled system.adapter.vis-map.0 : vis-map : raspberrypi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1888, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/ttyUSB0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): beta Installed ioBroker-Instances Used repository: beta Adapter "admin" : 6.17.14 , installed 6.17.14 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.5 , installed 2.11.0 [Updatable] Adapter "cloud" : 5.0.1 , installed 4.4.1 [Updatable] Adapter "discovery" : 4.5.0 , installed 4.4.0 [Updatable] Adapter "enocean" : 0.9.3 , installed 0.9.3 Adapter "eusec" : 1.2.1 , installed 1.2.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "iot" : 3.3.0 , installed 3.2.2 [Updatable] Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 8.6.0 , installed 7.8.0 [Updatable] Controller "js-controller": 6.0.5 , installed 6.0.5 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 4.1.1 [Updatable] Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "nuki" : 2.0.0 , installed 1.6.0 [Updatable] Adapter "nuki-extended": 2.7.0 , installed 2.7.0 Adapter "opendtu" : 1.0.1 , installed 1.0.1 Adapter "pushover" : 3.0.6 , installed 3.0.6 Adapter "pvforecast" : 2.9.1 , installed 2.9.1 Adapter "radar2" : 2.2.0 , installed 2.1.0 [Updatable] Adapter "ring" : 5.0.10 , installed 5.0.10 Adapter "scenes" : 3.0.4 , installed 2.4.2 [Updatable] Adapter "shelly" : 7.0.0 , installed 6.8.0 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.0 , installed 6.6.0 [Updatable] Adapter "tado" : 0.5.4 , installed 0.5.4 Adapter "tahoma" : 0.10.4 , installed 0.10.4 Adapter "tankerkoenig" : 3.4.0 , installed 3.3.7 [Updatable] Adapter "tr-064" : 4.3.0 , installed 4.2.18 [Updatable] Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.0.12 [Updatable] Adapter "vis-map" : 1.1.0 , installed 1.0.5 [Updatable] Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "weatherunderground": 3.7.0, installed 3.6.0 [Updatable] Adapter "web" : 6.2.6 , installed 6.2.3 [Updatable] Adapter "ws" : 2.6.1 , installed 2.5.10 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 6795 States: 5643 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Hit:3 https://repo.homebridge.io stable InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:39793 0.0.0.0:* LISTEN 1001 22982 1144/io.yahka.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 17272 625/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 16965 439/cupsd tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 20193 940/io.mqtt.0 tcp 0 0 127.0.0.1:34751 0.0.0.0:* LISTEN 1001 22978 1144/io.yahka.0 tcp 0 0 0.0.0.0:1888 0.0.0.0:* LISTEN 1001 21698 960/io.shelly.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 19732 613/iobroker.js-con tcp 0 0 127.0.0.1:38473 0.0.0.0:* LISTEN 1001 23309 1144/io.yahka.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 20777 613/iobroker.js-con tcp 0 0 127.0.0.1:41775 0.0.0.0:* LISTEN 1001 23166 1144/io.yahka.0 tcp6 0 0 :::8081 :::* LISTEN 1001 21089 710/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 22650 1064/io.web.0 tcp6 0 0 :::38389 :::* LISTEN 1001 24210 1144/io.yahka.0 tcp6 0 0 :::22 :::* LISTEN 0 17274 625/sshd tcp6 0 0 ::1:631 :::* LISTEN 0 16964 439/cupsd tcp6 0 0 :::1984 :::* LISTEN 1001 29129 2768/go2rtc tcp6 0 0 :::8581 :::* LISTEN 116 19012 683/hb-service tcp6 0 0 :::51399 :::* LISTEN 116 19063 717/homebridge tcp6 0 0 :::8554 :::* LISTEN 1001 29123 2768/go2rtc tcp6 0 0 :::8555 :::* LISTEN 1001 29126 2768/go2rtc udp 0 0 0.0.0.0:43996 0.0.0.0:* 1001 29045 1791/io.eusec.0 udp 0 0 0.0.0.0:67 0.0.0.0:* 1001 21600 893/io.radar2.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 17043 612/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 17531 472/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 116 19064 717/homebridge udp 0 0 0.0.0.0:5353 0.0.0.0:* 116 19009 683/hb-service udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 15689 418/avahi-daemon: r udp 0 0 0.0.0.0:60685 0.0.0.0:* 108 15691 418/avahi-daemon: r udp 0 0 0.0.0.0:35679 0.0.0.0:* 1001 29040 1791/io.eusec.0 udp6 0 0 :::5353 :::* 108 15690 418/avahi-daemon: r udp6 0 0 :::58643 :::* 108 15692 418/avahi-daemon: r udp6 0 0 :::8555 :::* 1001 29127 2768/go2rtc *** Log File - Last 25 Lines *** 2024-06-20 14:51:58.764 - info: host.raspberrypi instance system.adapter.vis-google-fonts.0 terminated while should be started once 2024-06-20 14:52:00.990 - info: iot.0 (1244) Connection changed: connect "pascal_pbennoit_de" 2024-06-20 14:52:01.369 - info: host.raspberrypi instance system.adapter.pvforecast.0 started with pid 2067 2024-06-20 14:52:01.733 - info: tado.0 (1508) starting. Version 0.5.4 in /opt/iobroker/node_modules/iobroker.tado, node: v18.20.3, js-controller: 6.0.5 2024-06-20 14:52:01.867 - info: tado.0 (1508) Started with JSON-Explorer version 0.1.15 2024-06-20 14:52:04.148 - info: tado.0 (1508) Connected to Tado cloud, initialyzing... 2024-06-20 14:52:05.940 - info: host.raspberrypi instance system.adapter.enocean.0 started with pid 2313 2024-06-20 14:52:07.712 - info: vis-inventwo.0 (1769) starting. Version 3.3.3 in /opt/iobroker/node_modules/iobroker.vis-inventwo, node: v18.20.3, js-controller: 6.0.5 2024-06-20 14:52:08.078 - info: opendtu.0 (1794) starting. Version 1.0.1 in /opt/iobroker/node_modules/iobroker.opendtu, node: v18.20.3, js-controller: 6.0.5 2024-06-20 14:52:08.596 - info: eusec.0 (1791) starting. Version 1.2.1 in /opt/iobroker/node_modules/iobroker.eusec, node: v18.20.3, js-controller: 6.0.5 2024-06-20 14:52:09.044 - info: info.0 (1031) Reading network data every 3 seconds. 2024-06-20 14:52:09.147 - info: opendtu.0 (1794) Connect to OpenDTU over websocket connection. 2024-06-20 14:52:18.398 - info: eusec.0 (1791) Connected to station T8010P2322101A9A on host 192.168.0.24 and port 16267 2024-06-20 14:52:19.340 - info: enocean.0 (2313) starting. Version 0.9.3 in /opt/iobroker/node_modules/iobroker.enocean, node: v18.20.3, js-controller: 6.0.5 2024-06-20 14:52:19.429 - info: pvforecast.0 (2067) starting. Version 2.9.1 in /opt/iobroker/node_modules/iobroker.pvforecast, node: v18.20.3, js-controller: 6.0.5 2024-06-20 14:52:19.417 - error: eusec.0 (1791) Station: T8010P2322101A9A command CMD_SDINFO_EX failed with error: undefined (-148) 2024-06-20 14:52:20.116 - warn: enocean.0 (2313) An error occured at serial port: Error: Error Resource temporarily unavailable Cannot lock port 2024-06-20 14:52:20.358 - info: eusec.0 (1791) go2rtc started: 14:52:19.735 INF go2rtc version 1.8.5 linux/arm 14:52:19.738 INF [rtsp] listen addr=:8554 14:52:19.739 INF [api] listen addr=:1984 14:52:19.741 INF [webrtc] listen addr=:8555 2024-06-20 14:52:25.111 - info: tado.0 (1508) Initialisation finished, connected to Tado cloud service refreshing every 30 seconds 2024-06-20 14:52:28.793 - info: pvforecast.0 (2067) Starting internal update cron (every 15 Minutes) for timezone: Europe/Berlin 2024-06-20 14:52:32.628 - info: eusec.0 (1791) Push notification connection successfully established============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
-
@mooly sagte in NPM komplettes Update machen?:
*** NodeJS-Installation ***
/usr/bin/nodejs v18.20.3
/usr/bin/node v18.20.3
/usr/bin/npm 10.7.0
/usr/bin/npx 10.7.0
/usr/bin/corepack 0.28.0Ist doch drin...
-
Das stellt mich vor ein großes Problem. Das habe ich so noch nie gemacht. Hätte ich das vorher gewusst...
Ich versuche es weiter.
-
Ich weiß gar nicht wo dein Problem liegt...
*** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl -
Ich kann aktuell nicht auf meine VIS bzw. Admin zugreifen. Ich vermute gerade ein anderes Problem...
Ich werde mich auf jeden Fall mal mit dem OS Update beschäftigen. Sorry für die Noob-Fragen. Ich danke euch sehr für eure Unterstützung.
-
@mooly sagte in NPM komplettes Update machen?:
Ich vermute gerade ein anderes Problem...
In dem
iob diagsehe ich auch noch andere Probleme. -
@mooly sagte in NPM komplettes Update machen?:
Ich werde mich auf jeden Fall mal mit dem OS Update beschäftigen.
Wirst du machen müssen. Der Buster wird nicht lebendiger. Steig von dem toten Pferd runter.
https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht
-
Klasse... vielen Dank!
-
@mooly sagte in ioBroker komplett neu installieren (Argon ONE mit SSD):
dennoch ihr System aktuell halten wollen
@mooly sagte in NPM komplettes Update machen?:
Ich werde mich auf jeden Fall mal mit dem OS Update beschäftigen.
das ist allerdings ein Zitat aus Juni/2024
-
Was genau ist denn jetzt das Problem? Was willst du mir mitteilen?
Wenn du nichts konstruktives zum Thema beitragen kannst, sind auch diese Posts unnötig.
-
@mooly was soll denn das jetzt?
Dieser Post von @crunchip wird aufgrund deines crosspostings mit https://forum.iobroker.net/topic/79539/iobroker-komplett-neu-installieren-argon-one-mit-ssd/1 entstanden sein und eine Frage nach der Aktualität der hier genannten Informationen.Oder willst du keine Hilfe mehr?
-
@mooly sagte in NPM komplettes Update machen?:
willst du mir mitteilen?
Wollte eigentlich im anderen Thread zitieren um die Informationen zu verbinden.
@mooly sagte in NPM komplettes Update machen?:
konstruktives zum Thema beitragen kannst
Hattest du bereits bekommen und nicht nachgegangen, somit nicht mein, sondern dein Problem
@mooly sagte in NPM komplettes Update machen?:
sind auch diese Posts unnötig.
Gut zu wissen und für solche Aussagen ist mir die Zeit zu schade.
Schöne Abend noch -
Sah für mich eher danach aus, dass man sich daran belustigt, dass seit Juni nix passiert ist und ich erneut nach Unterstützung frage. Bin aber erleichtert, dass das anscheinend nicht der Fall ist.
