NEWS
Problem Deconz Bookworm
ioBroker Allgemein
73
Beiträge
7
Kommentatoren
7.8k
Aufrufe
6
Watching
-
Hallo, nach Update auf Bookworm, musste ich alle Deconz/Zigbee Sensoren neu anlernen. Nachdem ich alles gemacht habe und den Raspi mit reboot neu gestartet habe, sind alle Sensoren zwar da, aber sie reagieren nicht mehr und sind alle auf geöffnet/ open true....rechable sind sie laut Azeige auch alle.....ich verzweifel hier bald nach wieder 3 Tagen fummelei
-
@thomas-braun ```
======== Start marking the full check here =========Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 13:33:43 up 35 min, 2 users, load average: 0.66, 0.60, 0.74 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sat 2023-10-28 13:33:43 CEST Universal time: Sat 2023-10-28 11:33:43 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 2.3G 5.4G 1.2M 609M 5.9G Swap: 104M 0B 104M Total: 8.3G 2.3G 5.5G 7810 M total memory 2182 M used memory 2184 M active memory 319 M inactive memory 5169 M free memory 50 M buffer memory 530 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 782M 1.2M 780M 1% /run /dev/sda2 ext4 459G 5.7G 430G 2% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat Oct 28 12:58:19 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:E2:12:0E vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 115200 console=tty1 root=PARTUUID=02486d08-02 rootfstype=ext4 fsck.repair=yes rootwait [Sat Oct 28 12:58:25 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Sat Oct 28 12:58:28 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 649M /var/ 201M /var/cache 195M /var/cache/apt 183M /var/log 182M /var/log/journal/7942b99bd7f64894befa33dc4a620fca Archived and active journals take up 181.7M in the file system. /opt/iobroker/backups: 77M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 995M /opt/iobroker/iobroker-data/ 519M /opt/iobroker/iobroker-data/files 219M /opt/iobroker/iobroker-data/backup-objects 133M /opt/iobroker/iobroker-data/history 62M /opt/iobroker/iobroker-data/files/vis.0 The five largest files in iobroker-data are: 42M /opt/iobroker/iobroker-data/states.jsonl 41M /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 23M /opt/iobroker/iobroker-data/history/20201011/history.mihome-vacuum.0.history.allTableHTML.json 21M /opt/iobroker/iobroker-data/objects.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218695-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 system.adapter.devices.0 : devices : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.eventlist.0 : eventlist : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hs100.0 : hs100 : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: raspberrypi - enabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : raspberrypi - enabled system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - enabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - enabled system.adapter.icons-material-svg.0 : icons-material-svg : raspberrypi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspberrypi - enabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.kodi.0 : kodi : raspberrypi - disabled, port: 9999 system.adapter.material.0 : material : raspberrypi - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.mihome.0 : mihome : raspberrypi - enabled, port: 9898, bind: 0.0.0.0 system.adapter.mobile.0 : mobile : raspberrypi - enabled + system.adapter.musiccast.0 : musiccast : raspberrypi - enabled + system.adapter.octoprint.0 : octoprint : raspberrypi - enabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled system.adapter.parcel.0 : parcel : raspberrypi - disabled system.adapter.parcel.1 : parcel : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.radar2.0 : radar2 : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sql.0 : sql : raspberrypi - enabled, port: 0 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tr-064.2 : tr-064 : raspberrypi - disabled + system.adapter.tr-064.3 : tr-064 : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : raspberrypi - enabled system.adapter.vis-history.0 : vis-history : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - enabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi - enabled system.adapter.vis-keyboard.0 : vis-keyboard : raspberrypi - enabled system.adapter.vis-lcars.0 : vis-lcars : raspberrypi - enabled system.adapter.vis-map.0 : vis-map : raspberrypi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - enabled system.adapter.vis-material-webfont.0 : vis-material-webfont : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - enabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - enabled system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : raspberrypi - enabled + system.adapter.yamaha.0 : yamaha : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.mihome.0 : mihome : raspberrypi - enabled, port: 9898, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sql.0 : sql : raspberrypi - enabled, port: 0 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.25.2 , installed 3.25.2 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "deconz" : 1.3.21 , installed 1.3.21 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "eventlist" : 1.2.3 , installed 1.2.3 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hs100" : 2.1.2 , installed 2.1.2 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "kodi" : 3.0.0 , installed 3.0.0 Adapter "material" : 1.3.1 , installed 1.3.1 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.0.0 , installed 4.0.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "musiccast" : 1.1.3 , installed 1.1.3 Adapter "octoprint" : 4.0.0 , installed 4.0.0 Adapter "openweathermap": 0.3.9 , installed 0.3.9 Adapter "parcel" : 0.0.27 , installed 0.1.6 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "radar2" : 2.0.7 , installed 2.0.7 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.4.5 , installed 6.4.5 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.96.0 , installed 0.96.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "worx" : 2.3.2 , installed 2.3.2 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yamaha" : 0.5.3 , installed 0.5.3 Objects and States Please stand by - This may take a while Objects: 12744 States: 11357 *** OS-Repositories and Updates *** W: http://phoscon.de/apt/deconz/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://phoscon.de/apt/deconz bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... W: http://phoscon.de/apt/deconz/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 18792 1504/io.sonoff.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 18901 1624/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 631 744/sshd: /usr/sbin tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 15838 552/deCONZ tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 16544 552/deCONZ tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 15976 735/iobroker.js-con tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 16593 735/iobroker.js-con tcp6 0 0 :::8082 :::* LISTEN 1001 19113 1880/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 979 1116/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 633 744/sshd: /usr/sbin udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 19690 1535/io.mihome.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 24597 2526/io.deconz.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 17714 552/deCONZ udp 0 0 0.0.0.0:48194 0.0.0.0:* 104 15754 547/avahi-daemon: r udp 0 0 0.0.0.0:67 0.0.0.0:* 1001 17334 1729/io.radar2.0 udp 0 0 0.0.0.0:41100 0.0.0.0:* 1001 22808 2650/io.musiccast.0 udp 0 0 0.0.0.0:54321 0.0.0.0:* 1001 18940 1699/io.mihome-vacu udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 15752 547/avahi-daemon: r udp6 0 0 :::1900 :::* 1001 24599 2526/io.deconz.0 udp6 0 0 :::1900 :::* 1001 24598 2526/io.deconz.0 udp6 0 0 fe80::4cb3:1e25:d26:546 :::* 0 15854 724/NetworkManager udp6 0 0 :::38081 :::* 104 15755 547/avahi-daemon: r udp6 0 0 :::5353 :::* 104 15753 547/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-10-26 12:19:34.639 - info: host.raspberrypi received SIGTERM 2023-10-26 12:19:34.640 - info: admin.0 (897) terminating http server on port 8081 2023-10-26 12:19:34.645 - info: host.raspberrypi stopInstance system.adapter.admin.0 (force=false, process=true) 2023-10-26 12:19:34.646 - info: host.raspberrypi stopInstance system.adapter.discovery.0 (force=false, process=true) 2023-10-26 12:19:34.646 - info: host.raspberrypi stopInstance system.adapter.backitup.0 (force=false, process=true) 2023-10-26 12:19:34.662 - info: admin.0 (897) Got terminate signal TERMINATE_YOURSELF 2023-10-26 12:19:34.664 - info: discovery.0 (904) Got terminate signal TERMINATE_YOURSELF 2023-10-26 12:19:34.665 - info: backitup.0 (974) Got terminate signal TERMINATE_YOURSELF 2023-10-26 12:19:34.668 - info: backitup.0 (974) terminating 2023-10-26 12:19:34.668 - info: discovery.0 (904) terminating 2023-10-26 12:19:34.668 - info: admin.0 (897) terminating 2023-10-26 12:19:34.671 - info: host.raspberrypi stopInstance system.adapter.admin.0 send kill signal 2023-10-26 12:19:34.671 - info: backitup.0 (974) Terminated (NO_ERROR): Without reason 2023-10-26 12:19:34.671 - info: discovery.0 (904) Terminated (NO_ERROR): Without reason 2023-10-26 12:19:34.672 - info: admin.0 (897) Terminated (NO_ERROR): Without reason 2023-10-26 12:19:34.673 - info: host.raspberrypi stopInstance system.adapter.discovery.0 send kill signal 2023-10-26 12:19:34.674 - info: host.raspberrypi stopInstance system.adapter.backitup.0 send kill signal 2023-10-26 12:19:35.150 - info: backitup.0 (974) terminating 2023-10-26 12:19:35.150 - info: discovery.0 (904) terminating 2023-10-26 12:19:35.151 - info: admin.0 (897) terminating 2023-10-26 12:19:35.362 - info: host.raspberrypi instance system.adapter.admin.0 terminated with code 0 (NO_ERROR) 2023-10-26 12:19:35.401 - info: host.raspberrypi instance system.adapter.discovery.0 terminated with code 0 (NO_ERROR) 2023-10-26 12:19:35.402 - info: host.raspberrypi instance system.adapter.backitup.0 terminated with code 0 (NO_ERROR) 2023-10-26 12:19:35.402 - info: host.raspberrypi All instances are stopped. 2023-10-26 12:19:35.503 - info: host.raspberrypi terminated============ Mark until here for C&P =============
Raspberry 4 - 8GB / 500 GB Festplatte mit IoBroker! 1xConbee 2, 15xAQARA Door Sensoren,2xSonoff Door Sensor, 2xSonoff Pov2, 2xAQARA Watersensoren, 3xIKEA TRÅDFRI Bewegungsmelder, 5xIKEA TRÅDFRI Repeater, 1x IKEA TRÅDFRI Treiber 10w, 10xTeckin Steckdosen mit Tasmota-Flash, 1xShelly SHSW-1, 2xAQARA Taster, 4xAlexa...usw.
-
@thomas-braun ```
======== Start marking the full check here =========Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 13:33:43 up 35 min, 2 users, load average: 0.66, 0.60, 0.74 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sat 2023-10-28 13:33:43 CEST Universal time: Sat 2023-10-28 11:33:43 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 2.3G 5.4G 1.2M 609M 5.9G Swap: 104M 0B 104M Total: 8.3G 2.3G 5.5G 7810 M total memory 2182 M used memory 2184 M active memory 319 M inactive memory 5169 M free memory 50 M buffer memory 530 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 782M 1.2M 780M 1% /run /dev/sda2 ext4 459G 5.7G 430G 2% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sat Oct 28 12:58:19 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:E2:12:0E vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 115200 console=tty1 root=PARTUUID=02486d08-02 rootfstype=ext4 fsck.repair=yes rootwait [Sat Oct 28 12:58:25 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Sat Oct 28 12:58:28 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 649M /var/ 201M /var/cache 195M /var/cache/apt 183M /var/log 182M /var/log/journal/7942b99bd7f64894befa33dc4a620fca Archived and active journals take up 181.7M in the file system. /opt/iobroker/backups: 77M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 995M /opt/iobroker/iobroker-data/ 519M /opt/iobroker/iobroker-data/files 219M /opt/iobroker/iobroker-data/backup-objects 133M /opt/iobroker/iobroker-data/history 62M /opt/iobroker/iobroker-data/files/vis.0 The five largest files in iobroker-data are: 42M /opt/iobroker/iobroker-data/states.jsonl 41M /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 23M /opt/iobroker/iobroker-data/history/20201011/history.mihome-vacuum.0.history.allTableHTML.json 21M /opt/iobroker/iobroker-data/objects.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2218695-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 system.adapter.devices.0 : devices : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.eventlist.0 : eventlist : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hs100.0 : hs100 : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: raspberrypi - enabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : raspberrypi - enabled system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - enabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - enabled system.adapter.icons-material-svg.0 : icons-material-svg : raspberrypi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspberrypi - enabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.kodi.0 : kodi : raspberrypi - disabled, port: 9999 system.adapter.material.0 : material : raspberrypi - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.mihome.0 : mihome : raspberrypi - enabled, port: 9898, bind: 0.0.0.0 system.adapter.mobile.0 : mobile : raspberrypi - enabled + system.adapter.musiccast.0 : musiccast : raspberrypi - enabled + system.adapter.octoprint.0 : octoprint : raspberrypi - enabled system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled system.adapter.parcel.0 : parcel : raspberrypi - disabled system.adapter.parcel.1 : parcel : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.radar2.0 : radar2 : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sql.0 : sql : raspberrypi - enabled, port: 0 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tr-064.2 : tr-064 : raspberrypi - disabled + system.adapter.tr-064.3 : tr-064 : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : raspberrypi - enabled system.adapter.vis-history.0 : vis-history : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - enabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi - enabled system.adapter.vis-keyboard.0 : vis-keyboard : raspberrypi - enabled system.adapter.vis-lcars.0 : vis-lcars : raspberrypi - enabled system.adapter.vis-map.0 : vis-map : raspberrypi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - enabled system.adapter.vis-material-webfont.0 : vis-material-webfont : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - enabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - enabled system.adapter.vis-rgraph.0 : vis-rgraph : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.worx.0 : worx : raspberrypi - enabled + system.adapter.yamaha.0 : yamaha : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.mihome.0 : mihome : raspberrypi - enabled, port: 9898, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sql.0 : sql : raspberrypi - enabled, port: 0 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.25.2 , installed 3.25.2 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "deconz" : 1.3.21 , installed 1.3.21 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "eventlist" : 1.2.3 , installed 1.2.3 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hs100" : 2.1.2 , installed 2.1.2 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "kodi" : 3.0.0 , installed 3.0.0 Adapter "material" : 1.3.1 , installed 1.3.1 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.0.0 , installed 4.0.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "musiccast" : 1.1.3 , installed 1.1.3 Adapter "octoprint" : 4.0.0 , installed 4.0.0 Adapter "openweathermap": 0.3.9 , installed 0.3.9 Adapter "parcel" : 0.0.27 , installed 0.1.6 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "radar2" : 2.0.7 , installed 2.0.7 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.4.5 , installed 6.4.5 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "sonoff" : 2.5.3 , installed 2.5.3 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.96.0 , installed 0.96.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "worx" : 2.3.2 , installed 2.3.2 Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "yamaha" : 0.5.3 , installed 0.5.3 Objects and States Please stand by - This may take a while Objects: 12744 States: 11357 *** OS-Repositories and Updates *** W: http://phoscon.de/apt/deconz/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://phoscon.de/apt/deconz bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... W: http://phoscon.de/apt/deconz/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 18792 1504/io.sonoff.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 18901 1624/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 631 744/sshd: /usr/sbin tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 15838 552/deCONZ tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 16544 552/deCONZ tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 15976 735/iobroker.js-con tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 16593 735/iobroker.js-con tcp6 0 0 :::8082 :::* LISTEN 1001 19113 1880/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 979 1116/io.admin.0 tcp6 0 0 :::22 :::* LISTEN 0 633 744/sshd: /usr/sbin udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 19690 1535/io.mihome.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 24597 2526/io.deconz.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 17714 552/deCONZ udp 0 0 0.0.0.0:48194 0.0.0.0:* 104 15754 547/avahi-daemon: r udp 0 0 0.0.0.0:67 0.0.0.0:* 1001 17334 1729/io.radar2.0 udp 0 0 0.0.0.0:41100 0.0.0.0:* 1001 22808 2650/io.musiccast.0 udp 0 0 0.0.0.0:54321 0.0.0.0:* 1001 18940 1699/io.mihome-vacu udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 15752 547/avahi-daemon: r udp6 0 0 :::1900 :::* 1001 24599 2526/io.deconz.0 udp6 0 0 :::1900 :::* 1001 24598 2526/io.deconz.0 udp6 0 0 fe80::4cb3:1e25:d26:546 :::* 0 15854 724/NetworkManager udp6 0 0 :::38081 :::* 104 15755 547/avahi-daemon: r udp6 0 0 :::5353 :::* 104 15753 547/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-10-26 12:19:34.639 - info: host.raspberrypi received SIGTERM 2023-10-26 12:19:34.640 - info: admin.0 (897) terminating http server on port 8081 2023-10-26 12:19:34.645 - info: host.raspberrypi stopInstance system.adapter.admin.0 (force=false, process=true) 2023-10-26 12:19:34.646 - info: host.raspberrypi stopInstance system.adapter.discovery.0 (force=false, process=true) 2023-10-26 12:19:34.646 - info: host.raspberrypi stopInstance system.adapter.backitup.0 (force=false, process=true) 2023-10-26 12:19:34.662 - info: admin.0 (897) Got terminate signal TERMINATE_YOURSELF 2023-10-26 12:19:34.664 - info: discovery.0 (904) Got terminate signal TERMINATE_YOURSELF 2023-10-26 12:19:34.665 - info: backitup.0 (974) Got terminate signal TERMINATE_YOURSELF 2023-10-26 12:19:34.668 - info: backitup.0 (974) terminating 2023-10-26 12:19:34.668 - info: discovery.0 (904) terminating 2023-10-26 12:19:34.668 - info: admin.0 (897) terminating 2023-10-26 12:19:34.671 - info: host.raspberrypi stopInstance system.adapter.admin.0 send kill signal 2023-10-26 12:19:34.671 - info: backitup.0 (974) Terminated (NO_ERROR): Without reason 2023-10-26 12:19:34.671 - info: discovery.0 (904) Terminated (NO_ERROR): Without reason 2023-10-26 12:19:34.672 - info: admin.0 (897) Terminated (NO_ERROR): Without reason 2023-10-26 12:19:34.673 - info: host.raspberrypi stopInstance system.adapter.discovery.0 send kill signal 2023-10-26 12:19:34.674 - info: host.raspberrypi stopInstance system.adapter.backitup.0 send kill signal 2023-10-26 12:19:35.150 - info: backitup.0 (974) terminating 2023-10-26 12:19:35.150 - info: discovery.0 (904) terminating 2023-10-26 12:19:35.151 - info: admin.0 (897) terminating 2023-10-26 12:19:35.362 - info: host.raspberrypi instance system.adapter.admin.0 terminated with code 0 (NO_ERROR) 2023-10-26 12:19:35.401 - info: host.raspberrypi instance system.adapter.discovery.0 terminated with code 0 (NO_ERROR) 2023-10-26 12:19:35.402 - info: host.raspberrypi instance system.adapter.backitup.0 terminated with code 0 (NO_ERROR) 2023-10-26 12:19:35.402 - info: host.raspberrypi All instances are stopped. 2023-10-26 12:19:35.503 - info: host.raspberrypi terminated============ Mark until here for C&P =============
Schaut, abgesehen vom veralteten Setup des Phoscon-Repos, soweit okay aus.
Welchen Adapter verwendest du? Deconz oder zigbee?
Start sieht wie im LogFile aus? -
Schaut, abgesehen vom veralteten Setup des Phoscon-Repos, soweit okay aus.
Welchen Adapter verwendest du? Deconz oder zigbee?
Start sieht wie im LogFile aus?@thomas-braun Deconz Adapter und das System ist so wie im diag
Raspberry 4 - 8GB / 500 GB Festplatte mit IoBroker! 1xConbee 2, 15xAQARA Door Sensoren,2xSonoff Door Sensor, 2xSonoff Pov2, 2xAQARA Watersensoren, 3xIKEA TRÅDFRI Bewegungsmelder, 5xIKEA TRÅDFRI Repeater, 1x IKEA TRÅDFRI Treiber 10w, 10xTeckin Steckdosen mit Tasmota-Flash, 1xShelly SHSW-1, 2xAQARA Taster, 4xAlexa...usw.
-
@thomas-braun Deconz Adapter und das System ist so wie im diag
@vandura sagte in Problem Deconz Bookworm:
das System ist so wie im diag
Joh, deswegen schaut man sich das ja an. Um zu sehen wie das Setup des Systems ist.
-
@vandura sagte in Problem Deconz Bookworm:
das System ist so wie im diag
Joh, deswegen schaut man sich das ja an. Um zu sehen wie das Setup des Systems ist.
@thomas-braun Was meinst du mit " Schaut, abgesehen vom veralteten Setup des Phoscon-Repos" muß ich da was ändern?
Raspberry 4 - 8GB / 500 GB Festplatte mit IoBroker! 1xConbee 2, 15xAQARA Door Sensoren,2xSonoff Door Sensor, 2xSonoff Pov2, 2xAQARA Watersensoren, 3xIKEA TRÅDFRI Bewegungsmelder, 5xIKEA TRÅDFRI Repeater, 1x IKEA TRÅDFRI Treiber 10w, 10xTeckin Steckdosen mit Tasmota-Flash, 1xShelly SHSW-1, 2xAQARA Taster, 4xAlexa...usw.
-
@thomas-braun Was meinst du mit " Schaut, abgesehen vom veralteten Setup des Phoscon-Repos" muß ich da was ändern?
@vandura sagte in Problem Deconz Bookworm:
muß ich da was ändern?
Im Moment nicht zwingend. Das wird aber in künftigen Versionen zu einem Fehler werden.
Hier steht der aktuelle Weg drin:
https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind
-
@vandura sagte in Problem Deconz Bookworm:
muß ich da was ändern?
Im Moment nicht zwingend. Das wird aber in künftigen Versionen zu einem Fehler werden.
Hier steht der aktuelle Weg drin:
https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind
@thomas-braun ok, schau ich mal.....ich bin jetzt Sensor für Sensor einmal im deconz unter neuen Sensor hinzufügen einmal anpingen, ( obwohl sie da sind )dann geht er wieder....aber kann ja nicht sein, das ich keinen reboot mehr machen kann......
Raspberry 4 - 8GB / 500 GB Festplatte mit IoBroker! 1xConbee 2, 15xAQARA Door Sensoren,2xSonoff Door Sensor, 2xSonoff Pov2, 2xAQARA Watersensoren, 3xIKEA TRÅDFRI Bewegungsmelder, 5xIKEA TRÅDFRI Repeater, 1x IKEA TRÅDFRI Treiber 10w, 10xTeckin Steckdosen mit Tasmota-Flash, 1xShelly SHSW-1, 2xAQARA Taster, 4xAlexa...usw.
-
@thomas-braun ok, schau ich mal.....ich bin jetzt Sensor für Sensor einmal im deconz unter neuen Sensor hinzufügen einmal anpingen, ( obwohl sie da sind )dann geht er wieder....aber kann ja nicht sein, das ich keinen reboot mehr machen kann......
@vandura sagte in Problem Deconz Bookworm:
aber kann ja nicht sein, das ich keinen reboot mehr machen kann......
Nö, das sollte aber auch damit nix zu tun haben.
systemctl status deconz*
sagt?
-
@vandura sagte in Problem Deconz Bookworm:
aber kann ja nicht sein, das ich keinen reboot mehr machen kann......
Nö, das sollte aber auch damit nix zu tun haben.
systemctl status deconz*
sagt?
@thomas-braun sagte in Problem Deconz Bookworm:
systemctl status deconz
● deconz.service - deCONZ: ZigBee gateway -- REST API Loaded: loaded (/lib/systemd/system/deconz.service; enabled; preset: enabl> Active: active (running) since Sat 2023-10-28 12:57:19 CEST; 2h 7min ago Main PID: 552 (deCONZ) Tasks: 5 (limit: 8740) CPU: 4min 40.254s CGroup: /system.slice/deconz.service └─552 /usr/bin/deCONZ -platform minimal --http-port=80 Oct 28 12:57:19 raspberrypi systemd[1]: Started deconz.service - deCONZ: ZigBee> Oct 28 12:57:23 raspberrypi deCONZ[552]: QStandardPaths: XDG_RUNTIME_DIR not se> Oct 28 12:57:25 raspberrypi deCONZ[552]: libpng warning: iCCP: known incorrect > Oct 28 12:57:31 raspberrypi deCONZ[552]: This plugin does not support propagate> Oct 28 12:57:31 raspberrypi deCONZ[552]: This plugin does not support propagate> Oct 28 12:57:33 raspberrypi deCONZ[552]: This plugin does not support propagate> lines 1-15/15 (END)...skipping... ● deconz.service - deCONZ: ZigBee gateway -- REST API Loaded: loaded (/lib/systemd/system/deconz.service; enabled; preset: enabled) Active: active (running) since Sat 2023-10-28 12:57:19 CEST; 2h 7min ago Main PID: 552 (deCONZ) Tasks: 5 (limit: 8740) CPU: 4min 40.254s CGroup: /system.slice/deconz.service └─552 /usr/bin/deCONZ -platform minimal --http-port=80 Oct 28 12:57:19 raspberrypi systemd[1]: Started deconz.service - deCONZ: ZigBee gateway -- REST API. Oct 28 12:57:23 raspberrypi deCONZ[552]: QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-pi' Oct 28 12:57:25 raspberrypi deCONZ[552]: libpng warning: iCCP: known incorrect sRGB profile Oct 28 12:57:31 raspberrypi deCONZ[552]: This plugin does not support propagateSizeHints() Oct 28 12:57:31 raspberrypi deCONZ[552]: This plugin does not support propagateSizeHints() Oct 28 12:57:33 raspberrypi deCONZ[552]: This plugin does not support propagateSizeHints() ~Raspberry 4 - 8GB / 500 GB Festplatte mit IoBroker! 1xConbee 2, 15xAQARA Door Sensoren,2xSonoff Door Sensor, 2xSonoff Pov2, 2xAQARA Watersensoren, 3xIKEA TRÅDFRI Bewegungsmelder, 5xIKEA TRÅDFRI Repeater, 1x IKEA TRÅDFRI Treiber 10w, 10xTeckin Steckdosen mit Tasmota-Flash, 1xShelly SHSW-1, 2xAQARA Taster, 4xAlexa...usw.
-
@thomas-braun sagte in Problem Deconz Bookworm:
systemctl status deconz
● deconz.service - deCONZ: ZigBee gateway -- REST API Loaded: loaded (/lib/systemd/system/deconz.service; enabled; preset: enabl> Active: active (running) since Sat 2023-10-28 12:57:19 CEST; 2h 7min ago Main PID: 552 (deCONZ) Tasks: 5 (limit: 8740) CPU: 4min 40.254s CGroup: /system.slice/deconz.service └─552 /usr/bin/deCONZ -platform minimal --http-port=80 Oct 28 12:57:19 raspberrypi systemd[1]: Started deconz.service - deCONZ: ZigBee> Oct 28 12:57:23 raspberrypi deCONZ[552]: QStandardPaths: XDG_RUNTIME_DIR not se> Oct 28 12:57:25 raspberrypi deCONZ[552]: libpng warning: iCCP: known incorrect > Oct 28 12:57:31 raspberrypi deCONZ[552]: This plugin does not support propagate> Oct 28 12:57:31 raspberrypi deCONZ[552]: This plugin does not support propagate> Oct 28 12:57:33 raspberrypi deCONZ[552]: This plugin does not support propagate> lines 1-15/15 (END)...skipping... ● deconz.service - deCONZ: ZigBee gateway -- REST API Loaded: loaded (/lib/systemd/system/deconz.service; enabled; preset: enabled) Active: active (running) since Sat 2023-10-28 12:57:19 CEST; 2h 7min ago Main PID: 552 (deCONZ) Tasks: 5 (limit: 8740) CPU: 4min 40.254s CGroup: /system.slice/deconz.service └─552 /usr/bin/deCONZ -platform minimal --http-port=80 Oct 28 12:57:19 raspberrypi systemd[1]: Started deconz.service - deCONZ: ZigBee gateway -- REST API. Oct 28 12:57:23 raspberrypi deCONZ[552]: QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-pi' Oct 28 12:57:25 raspberrypi deCONZ[552]: libpng warning: iCCP: known incorrect sRGB profile Oct 28 12:57:31 raspberrypi deCONZ[552]: This plugin does not support propagateSizeHints() Oct 28 12:57:31 raspberrypi deCONZ[552]: This plugin does not support propagateSizeHints() Oct 28 12:57:33 raspberrypi deCONZ[552]: This plugin does not support propagateSizeHints() ~ -
@thomas-braun Nein, sie sind alle noch vorhanden, aber reagieren nicht mehr und gehen alle auf open / true.....rechable sind alle aber müssen dur knöpfendrücken neu registriert werden behalten aber zum Glück die alte Bezeichnung und Adresse
Raspberry 4 - 8GB / 500 GB Festplatte mit IoBroker! 1xConbee 2, 15xAQARA Door Sensoren,2xSonoff Door Sensor, 2xSonoff Pov2, 2xAQARA Watersensoren, 3xIKEA TRÅDFRI Bewegungsmelder, 5xIKEA TRÅDFRI Repeater, 1x IKEA TRÅDFRI Treiber 10w, 10xTeckin Steckdosen mit Tasmota-Flash, 1xShelly SHSW-1, 2xAQARA Taster, 4xAlexa...usw.
-
@thomas-braun Nein, sie sind alle noch vorhanden, aber reagieren nicht mehr und gehen alle auf open / true.....rechable sind alle aber müssen dur knöpfendrücken neu registriert werden behalten aber zum Glück die alte Bezeichnung und Adresse
Und wie sieht das in der Phoscon App aus?
-
Und wie sieht das in der Phoscon App aus?
@thomas-braun Auch alle vorhanden und nicht augegraut, also das sie nicht erreichbar wäre......alles wie es sein muß
Raspberry 4 - 8GB / 500 GB Festplatte mit IoBroker! 1xConbee 2, 15xAQARA Door Sensoren,2xSonoff Door Sensor, 2xSonoff Pov2, 2xAQARA Watersensoren, 3xIKEA TRÅDFRI Bewegungsmelder, 5xIKEA TRÅDFRI Repeater, 1x IKEA TRÅDFRI Treiber 10w, 10xTeckin Steckdosen mit Tasmota-Flash, 1xShelly SHSW-1, 2xAQARA Taster, 4xAlexa...usw.
-
@thomas-braun Auch alle vorhanden und nicht augegraut, also das sie nicht erreichbar wäre......alles wie es sein muß
@vandura sagte in Problem Deconz Bookworm:
Auch alle vorhanden und nicht augegraut, also das sie nicht erreichbar wäre......alles wie es sein muß
Den Satz verstehe ich nicht.
-
@vandura sagte in Problem Deconz Bookworm:
Auch alle vorhanden und nicht augegraut, also das sie nicht erreichbar wäre......alles wie es sein muß
Den Satz verstehe ich nicht.
@thomas-braun
Beispiel.......sollten sie nicht erreichbar sein, werden sie schwach grau.....Raspberry 4 - 8GB / 500 GB Festplatte mit IoBroker! 1xConbee 2, 15xAQARA Door Sensoren,2xSonoff Door Sensor, 2xSonoff Pov2, 2xAQARA Watersensoren, 3xIKEA TRÅDFRI Bewegungsmelder, 5xIKEA TRÅDFRI Repeater, 1x IKEA TRÅDFRI Treiber 10w, 10xTeckin Steckdosen mit Tasmota-Flash, 1xShelly SHSW-1, 2xAQARA Taster, 4xAlexa...usw.
-
@thomas-braun
Beispiel.......sollten sie nicht erreichbar sein, werden sie schwach grau.....Und die Sensoren, die hier als 'geschlossen' geführt werden tauchen im Adapter als 'geöffnet' auf?
-
Und die Sensoren, die hier als 'geschlossen' geführt werden tauchen im Adapter als 'geöffnet' auf?
@thomas-braun nein, sie tauchen überall als geöffnet auf, ist ein Bild, wo ich sie schon wieder angelernt habe
Raspberry 4 - 8GB / 500 GB Festplatte mit IoBroker! 1xConbee 2, 15xAQARA Door Sensoren,2xSonoff Door Sensor, 2xSonoff Pov2, 2xAQARA Watersensoren, 3xIKEA TRÅDFRI Bewegungsmelder, 5xIKEA TRÅDFRI Repeater, 1x IKEA TRÅDFRI Treiber 10w, 10xTeckin Steckdosen mit Tasmota-Flash, 1xShelly SHSW-1, 2xAQARA Taster, 4xAlexa...usw.
-
@thomas-braun nein, sie tauchen überall als geöffnet auf, ist ein Bild, wo ich sie schon wieder angelernt habe
@vandura sagte in Problem Deconz Bookworm:
sie tauchen überall als geöffnet auf
Dann ist es ein Ding für Phoscon/Deconz. Der Adapter verarbeitet ja nur das was da vom Stick angeliefert wird. Wenn das nicht stimmt...
-
@vandura sagte in Problem Deconz Bookworm:
sie tauchen überall als geöffnet auf
Dann ist es ein Ding für Phoscon/Deconz. Der Adapter verarbeitet ja nur das was da vom Stick angeliefert wird. Wenn das nicht stimmt...
@thomas-braun ok, dann werde ich mal dort den Kundendienst kontaktieren.....hätte ja sein können das in der Konfiguration irgend etwas krumm ist....Danke trotzdem für deine Geduld und Hilfe.....:+1:
Raspberry 4 - 8GB / 500 GB Festplatte mit IoBroker! 1xConbee 2, 15xAQARA Door Sensoren,2xSonoff Door Sensor, 2xSonoff Pov2, 2xAQARA Watersensoren, 3xIKEA TRÅDFRI Bewegungsmelder, 5xIKEA TRÅDFRI Repeater, 1x IKEA TRÅDFRI Treiber 10w, 10xTeckin Steckdosen mit Tasmota-Flash, 1xShelly SHSW-1, 2xAQARA Taster, 4xAlexa...usw.
780
Online32.5k
Benutzer81.7k
Themen1.3m
Beiträge