NEWS
[gelöst] IOB per https nicht erreichbar / Zertifikat def.
ioBroker Allgemein
39
Beiträge
6
Kommentatoren
3.5k
Aufrufe
5
Watching
-
SSH is enabled and the default password for the 'pi' user has not been changed.
Solltest du dringend ändern.
@thomas-braun hast Recht...
-
@schneidy76 hoffe ich habe das vom Handy richtig gemacht..
Zeitzone richtig setzen. Vermutlich ist London falsch.
2GB RAM sind zu knapp kalkuliert für 34 Instanzen.
[Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): 11 orphan inodes deleted
Byebye, Daten die in diesen inodes gewohnt haben.
-
Dir geht der RAM aus und die Kiste wurde wohl schon lieblos vom Strom getrennt ;)
@djmarc75 habe sie nicht freiwillig hart resetet, hatte heute beim ssl Zugang einen freeze
-
Zeitzone richtig setzen. Vermutlich ist London falsch.
2GB RAM sind zu knapp kalkuliert für 34 Instanzen.
[Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): 11 orphan inodes deleted
Byebye, Daten die in diesen inodes gewohnt haben.
@thomas-braun okay, könnte noch einiges auf dem Slave auslagern. Der hat zwar auch nur 1GB, da läuft im Moment aber nicht viel drauf.
Wie belebe ich den Admin dann aber wieder?Ach Mist, ohne den Admin geht das ja nicht...
Raspberry Matic (RP3), LIVE PV Monitoring mit Smartmeter, Poolsteuerung mit NodeRed, KNX Ausbau (ersetzt stückweise HM & klassische Installation), ioBroker Multihost (RP4 &RP2), Visu mit VIS
-
@thomas-braun okay, könnte noch einiges auf dem Slave auslagern. Der hat zwar auch nur 1GB, da läuft im Moment aber nicht viel drauf.
Wie belebe ich den Admin dann aber wieder?Ach Mist, ohne den Admin geht das ja nicht...
-
Connecting to 192.168.0.115 port 22, please wait... login as: pi pi@192.168.0.115's password: Linux raspberrypi-Master 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Oct 25 16:23:32 2023 from 192.168.0.202 SSH is enabled and the default password for the 'pi' user has not been changed. This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password. Wi-Fi is currently blocked by rfkill. Use raspi-config to set the country before use. pi@raspberrypi-Master:~ $ iob restart admin The adapter "admin.0" was started. pi@raspberrypi-Master:~ $ iob diag The state system.host.raspberrypi-Master.versions.npmNewestNext was not found! The state system.host.raspberrypi-Master.versions.nodeCurrent was not found! *** ioBroker Diagnosis *** Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen The following checks may give hints to potential malconfigurations or errors, please post them in our forum: https://forum.iobroker.net Just copy and paste the Summary Page, including the ``` characters at start and end. It helps us to help you! Press any key to continue ======== Start marking the full check here =========Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi-Master Icon name: computer Operating System: Raspbian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 17:03:17 up 4:20, 3 users, load average: 1.47, 0.78, 0.62 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Wed 2023-10-25 17:03:17 BST Universal time: Wed 2023-10-25 16:03:17 UTC RTC time: n/a Time zone: Europe/London (BST, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.5G 222M 36K 250M 401M Swap: 104M 104M 630K Total: 2.0G 1.6G 222M 1848 M total memory 1464 M used memory 1415 M active memory 31 M inactive memory 212 M free memory 4 M buffer memory 235 M swap cache 99 M total swap 99 M used swap 0 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 118G 13G 101G 11% / devtmpfs devtmpfs 667M 0 667M 0% /dev tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 370M 868K 369M 1% /run tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 255M 51M 205M 20% /boot tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Oct 25 12:42:31 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:37:E1:5C vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=043caf75-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): write access will be enabled during recovery [Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): orphan cleanup on readonly fs [Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): 11 orphan inodes deleted [Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): recovery complete [Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Oct 25 12:42:33 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Wed Oct 25 12:42:35 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 651M /var/log 646M /var/log/journal/55a635084cf04e71bfee02b63eaea0f9 646M /var/log/journal 167M /var/cache Archived and active journals take up 645.4M in the file system. /opt/iobroker/backups: 6.8G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 464M /opt/iobroker/iobroker-data/ 243M /opt/iobroker/iobroker-data/files 97M /opt/iobroker/iobroker-data/backup-objects 92M /opt/iobroker/iobroker-data/node-red/node_modules 92M /opt/iobroker/iobroker-data/node-red The five largest files in iobroker-data are: 30M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0+dfsg1-1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian bookworm/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: 7.1.4 Adapters from github: 5 Adapter State system.adapter.admin.0 : admin : raspberrypi-Master - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi-Master - enabled + system.adapter.backitup.0 : backitup : raspberrypi-Master - enabled + system.adapter.cloud.0 : cloud : raspberrypi-Master - enabled system.adapter.daswetter.0 : daswetter : raspberrypi-Master - enabled + system.adapter.denon.0 : denon : raspberrypi-Master - enabled + system.adapter.discovery.0 : discovery : raspberrypi-Master - enabled system.adapter.dwd.0 : dwd : raspberrypi-Master - enabled + system.adapter.email.0 : email : raspberrypi-Master - enabled + system.adapter.enigma2.0 : enigma2 : raspberrypi-Master - enabled system.adapter.feiertage.0 : feiertage : raspberrypi-Master - enabled + system.adapter.fullybrowser.0 : fullybrowser : raspberrypi-Master - enabled + system.adapter.harmony.0 : harmony : raspberrypi-Master - enabled + system.adapter.history.0 : history : raspberrypi-Master - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi-Master - enabled + system.adapter.hm-rpc.3 : hm-rpc : raspberrypi-Master - enabled, port: 0 + system.adapter.hm-rpc.4 : hm-rpc : raspberrypi-Master - enabled, port: 0 + system.adapter.hm-rpc.5 : hm-rpc : raspberrypi-Master - enabled, port: 0 + system.adapter.hue.0 : hue : raspberrypi-Master - enabled, port: 80 system.adapter.ical.0 : ical : raspberrypi-Master - enabled + system.adapter.iot.0 : iot : raspberrypi-Master - enabled + system.adapter.javascript.0 : javascript : raspberrypi-Master - enabled + system.adapter.javascript.2 : javascript : raspberrypi - enabled + system.adapter.knx.0 : knx : raspberrypi-Master - enabled, bind: 192.168.0.115 system.adapter.labcom.0 : labcom : raspberrypi-Master - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi-Master - enabled, port: 54321 + system.adapter.node-red.0 : node-red : raspberrypi-Master - enabled, port: 1880, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : raspberrypi-Master - enabled + system.adapter.parcel.0 : parcel : raspberrypi-Master - enabled + system.adapter.sayit.0 : sayit : raspberrypi-Master - enabled + system.adapter.scenes.0 : scenes : raspberrypi-Master - enabled + system.adapter.simple-api.0 : simple-api : raspberrypi-Master - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : raspberrypi - enabled + system.adapter.smartmeter.1 : smartmeter : raspberrypi - enabled + system.adapter.socketio.0 : socketio : raspberrypi-Master - enabled, port: 8084, bind: 192.168.0.115, run as: admin + system.adapter.solarlog.0 : solarlog : raspberrypi-Master - enabled, port: 80 system.adapter.sonoff.0 : sonoff : raspberrypi - disabled, port: 1883, bind: 0.0.0.0 system.adapter.sql.0 : sql : raspberrypi-Master - disabled, port: 3306 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi-Master - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi-Master - enabled + system.adapter.tuya.0 : tuya : raspberrypi-Master - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi-Master - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi-Master - enabled system.adapter.vis-weather.0 : vis-weather : raspberrypi-Master - enabled system.adapter.vis.0 : vis : raspberrypi-Master - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi-Master - enabled + system.adapter.web.0 : web : raspberrypi-Master - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.wifilight.0 : wifilight : raspberrypi-Master - disabled + instance is alive Enabled adapters with bindings system.adapter.admin.0 : admin : raspberrypi-Master - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hm-rpc.3 : hm-rpc : raspberrypi-Master - enabled, port: 0 + system.adapter.hm-rpc.4 : hm-rpc : raspberrypi-Master - enabled, port: 0 + system.adapter.hm-rpc.5 : hm-rpc : raspberrypi-Master - enabled, port: 0 + system.adapter.hue.0 : hue : raspberrypi-Master - enabled, port: 80 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi-Master - enabled, port: 54321 + system.adapter.node-red.0 : node-red : raspberrypi-Master - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi-Master - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : raspberrypi-Master - enabled, port: 8084, bind: 192.168.0.115, run as: admin + system.adapter.solarlog.0 : solarlog : raspberrypi-Master - enabled, port: 80 + system.adapter.web.0 : web : raspberrypi-Master - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories sources : conf/sources-dist.json online : https://raw.githubusercontent.com/ioBroker/ioBroker.repositories/master/sources-dist.json stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.10.1 , installed 6.10.1 Adapter "alexa2" : 3.25.2 , installed 3.25.2 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "cec2" : 0.1.1 , installed 0.1.1 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "denon" : 1.15.4 , installed 1.15.4 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "history" : 3.0.1 , installed 2.2.6 [Updatable] Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "hue" : 3.10.1 , installed 3.10.0 [Updatable] Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "knx" : 2.0.22 , installed 2.0.22 Adapter "mihome-vacuum": 4.0.0 , installed 4.0.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "node-red" : 4.0.3 , installed 4.0.3 Adapter "openweathermap": 0.3.9 , installed 0.3.9 Adapter "parcel" : 0.0.27 , installed 0.0.27 Adapter "ph803w" : 1.1.1 , installed 1.1.1 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "solarlog" : 2.2.8 , installed 2.2.6 [Updatable] Adapter "sonos" : 2.3.1 , installed 2.3.1 Adapter "spotify-premium": 1.2.2 , installed 1.2.2 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "ws" : 2.5.5 , installed 2.5.5 Objects and States Please stand by - This may take a while Objects: 14467 States: 10597 *** OS-Repositories and Updates *** W: http://raspbian.raspberrypi.org/raspbian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. Hit:1 http://raspbian.raspberrypi.org/raspbian bookworm InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... W: http://raspbian.raspberrypi.org/raspbian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.0.115:8701 0.0.0.0:* LISTEN 1001 62182 7806/io.hm-rpc.5 tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1001 63203 7739/node-red tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11243 552/sshd: /usr/sbin tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 63194 7739/node-red tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 63916 7595/iobroker.js-co tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 61183 7595/iobroker.js-co tcp 0 0 192.168.0.115:2001 0.0.0.0:* LISTEN 1001 61392 7776/io.hm-rpc.3 tcp 0 0 192.168.0.115:2010 0.0.0.0:* LISTEN 1001 63168 7791/io.hm-rpc.4 tcp 0 0 192.168.0.115:8084 0.0.0.0:* LISTEN 1001 65716 8101/io.socketio.0 tcp6 0 0 :::22 :::* LISTEN 0 11245 552/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 65757 8135/io.simple-api. tcp6 0 0 :::8082 :::* LISTEN 1001 66688 8086/io.web.0 tcp6 0 0 :::61991 :::* LISTEN 1001 65580 8011/io.harmony.0 udp 0 0 192.168.0.115:40058 0.0.0.0:* 1001 80043 8161/io.knx.0 udp 0 0 192.168.0.115:52383 0.0.0.0:* 1001 81433 8161/io.knx.0 udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 62372 7913/io.mihome-vacu udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11059 392/avahi-daemon: r udp 0 0 192.168.0.115:57675 0.0.0.0:* 1001 63229 7739/node-red udp 0 0 192.168.0.115:46558 0.0.0.0:* 1001 66752 8161/io.knx.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 64680 7898/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 64681 7898/io.tuya.0 udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 65581 8011/io.harmony.0 udp 0 0 192.168.0.115:35494 0.0.0.0:* 1001 80850 8161/io.knx.0 udp 0 0 192.168.0.115:43869 0.0.0.0:* 1001 78660 8161/io.knx.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 63202 7739/node-red udp 0 0 0.0.0.0:54151 0.0.0.0:* 108 11061 392/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15451 800/dhcpcd udp6 0 0 :::52333 :::* 108 11062 392/avahi-daemon: r udp6 0 0 :::5353 :::* 108 11060 392/avahi-daemon: r udp6 0 0 :::546 :::* 0 13152 800/dhcpcd *** Log File - Last 25 Lines *** 2023-10-25 17:00:15.764 - info: daswetter.0 (9535) cleaned everything up... 2023-10-25 17:00:15.780 - info: host.raspberrypi-Master instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-10-25 17:00:18.622 - info: ical.0 (9565) Terminated (NO_ERROR): Without reason 2023-10-25 17:00:19.153 - info: host.raspberrypi-Master instance system.adapter.ical.0 terminated with code 0 (NO_ERROR) 2023-10-25 17:01:00.068 - info: host.raspberrypi-Master instance system.adapter.dwd.0 started with pid 9582 2023-10-25 17:01:03.129 - info: dwd.0 (9582) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.18.2, js-controller: 5.0.12 2023-10-25 17:01:04.128 - info: dwd.0 (9582) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-10-25 17:01:04.666 - info: host.raspberrypi-Master instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-10-25 17:02:00.090 - info: host.raspberrypi-Master instance system.adapter.openweathermap.0 started with pid 9597 2023-10-25 17:02:03.010 - info: openweathermap.0 (9597) starting. Version 0.3.9 in /opt/iobroker/node_modules/iobroker.openweathermap, node: v18.18.2, js-controller: 5.0.12 2023-10-25 17:02:20.699 - info: openweathermap.0 (9597) Terminated (NO_ERROR): Without reason 2023-10-25 17:02:21.232 - info: host.raspberrypi-Master instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2023-10-25 17:02:52.970 - info: host.raspberrypi-Master instance system.adapter.admin.0 started with pid 9666 2023-10-25 17:02:57.004 - info: admin.0 (9666) starting. Version 6.10.1 in /opt/iobroker/node_modules/iobroker.admin, node: v18.18.2, js-controller: 5.0.12 2023-10-25 17:02:57.066 - info: admin.0 (9666) requesting all objects 2023-10-25 17:03:00.301 - info: admin.0 (9666) received all objects 2023-10-25 17:03:01.130 - info: admin.0 (9666) Request actual repository... 2023-10-25 17:03:01.178 - error: admin.0 (9666) Cannot create web-server: Error: error:05800074:x509 certificate routines::key values mismatch 2023-10-25 17:03:01.182 - info: admin.0 (9666) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-10-25 17:03:01.551 - error: admin.0 (9666) Cannot update news: TypeError: newNews.forEach is not a function 2023-10-25 17:03:01.772 - warn: admin.0 (9666) Cannot check node.js/npm version 2023-10-25 17:03:02.162 - info: admin.0 (9666) terminating https server on port 8081 2023-10-25 17:03:02.565 - info: host.raspberrypi-Master Updating repository "stable" under "http://download.iobroker.net/sources-dist.json" 2023-10-25 17:03:02.938 - info: host.raspberrypi-Master instance system.adapter.admin.0 terminated by request of the instance itself and will not be restarted, before user restarts it. 2023-10-25 17:03:02.939 - info: host.raspberrypi-Master Do not restart adapter system.adapter.admin.0 because desired by instance============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
Copy text starting here:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: raspberrypi-Master Icon name: computer Operating System: Raspbian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: armhf Timezone: Europe/London (BST, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 3 Nodejs-Installation: /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 Recommended versions are nodejs and npm Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 1.9G 1.5G 112M 36K 348M 389M Swap: 104M 104M 245K Total: 2.0G 1.7G 112M Active iob-Instances: 34 Active repo(s): stable ioBroker Core: js-controller 5.0.12 admin 6.10.1 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: system.adapter.admin.0 : admin : raspberrypi-Master - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.web.0 : web : raspberrypi-Master - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 14467 States: 10597 Size of iob-Database: 30M /opt/iobroker/iobroker-data/objects.jsonl 4.0M /opt/iobroker/iobroker-data/states.jsonl=================== END OF SUMMARY ====================
=== Mark text until here for copying === pi@raspberrypi-Master:~ $ -
Connecting to 192.168.0.115 port 22, please wait... login as: pi pi@192.168.0.115's password: Linux raspberrypi-Master 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Oct 25 16:23:32 2023 from 192.168.0.202 SSH is enabled and the default password for the 'pi' user has not been changed. This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password. Wi-Fi is currently blocked by rfkill. Use raspi-config to set the country before use. pi@raspberrypi-Master:~ $ iob restart admin The adapter "admin.0" was started. pi@raspberrypi-Master:~ $ iob diag The state system.host.raspberrypi-Master.versions.npmNewestNext was not found! The state system.host.raspberrypi-Master.versions.nodeCurrent was not found! *** ioBroker Diagnosis *** Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen The following checks may give hints to potential malconfigurations or errors, please post them in our forum: https://forum.iobroker.net Just copy and paste the Summary Page, including the ``` characters at start and end. It helps us to help you! Press any key to continue ======== Start marking the full check here =========Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi-Master Icon name: computer Operating System: Raspbian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 17:03:17 up 4:20, 3 users, load average: 1.47, 0.78, 0.62 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Wed 2023-10-25 17:03:17 BST Universal time: Wed 2023-10-25 16:03:17 UTC RTC time: n/a Time zone: Europe/London (BST, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 1.5G 222M 36K 250M 401M Swap: 104M 104M 630K Total: 2.0G 1.6G 222M 1848 M total memory 1464 M used memory 1415 M active memory 31 M inactive memory 212 M free memory 4 M buffer memory 235 M swap cache 99 M total swap 99 M used swap 0 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 118G 13G 101G 11% / devtmpfs devtmpfs 667M 0 667M 0% /dev tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 370M 868K 369M 1% /run tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/sda1 vfat 255M 51M 205M 20% /boot tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Oct 25 12:42:31 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:37:E1:5C vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=043caf75-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): write access will be enabled during recovery [Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): orphan cleanup on readonly fs [Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): 11 orphan inodes deleted [Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): recovery complete [Wed Oct 25 12:42:33 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Oct 25 12:42:33 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Wed Oct 25 12:42:35 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.1G /var/ 651M /var/log 646M /var/log/journal/55a635084cf04e71bfee02b63eaea0f9 646M /var/log/journal 167M /var/cache Archived and active journals take up 645.4M in the file system. /opt/iobroker/backups: 6.8G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 464M /opt/iobroker/iobroker-data/ 243M /opt/iobroker/iobroker-data/files 97M /opt/iobroker/iobroker-data/backup-objects 92M /opt/iobroker/iobroker-data/node-red/node_modules 92M /opt/iobroker/iobroker-data/node-red The five largest files in iobroker-data are: 30M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map 8.9M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/2.7de3299d.chunk.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0+dfsg1-1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian bookworm/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: 7.1.4 Adapters from github: 5 Adapter State system.adapter.admin.0 : admin : raspberrypi-Master - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi-Master - enabled + system.adapter.backitup.0 : backitup : raspberrypi-Master - enabled + system.adapter.cloud.0 : cloud : raspberrypi-Master - enabled system.adapter.daswetter.0 : daswetter : raspberrypi-Master - enabled + system.adapter.denon.0 : denon : raspberrypi-Master - enabled + system.adapter.discovery.0 : discovery : raspberrypi-Master - enabled system.adapter.dwd.0 : dwd : raspberrypi-Master - enabled + system.adapter.email.0 : email : raspberrypi-Master - enabled + system.adapter.enigma2.0 : enigma2 : raspberrypi-Master - enabled system.adapter.feiertage.0 : feiertage : raspberrypi-Master - enabled + system.adapter.fullybrowser.0 : fullybrowser : raspberrypi-Master - enabled + system.adapter.harmony.0 : harmony : raspberrypi-Master - enabled + system.adapter.history.0 : history : raspberrypi-Master - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi-Master - enabled + system.adapter.hm-rpc.3 : hm-rpc : raspberrypi-Master - enabled, port: 0 + system.adapter.hm-rpc.4 : hm-rpc : raspberrypi-Master - enabled, port: 0 + system.adapter.hm-rpc.5 : hm-rpc : raspberrypi-Master - enabled, port: 0 + system.adapter.hue.0 : hue : raspberrypi-Master - enabled, port: 80 system.adapter.ical.0 : ical : raspberrypi-Master - enabled + system.adapter.iot.0 : iot : raspberrypi-Master - enabled + system.adapter.javascript.0 : javascript : raspberrypi-Master - enabled + system.adapter.javascript.2 : javascript : raspberrypi - enabled + system.adapter.knx.0 : knx : raspberrypi-Master - enabled, bind: 192.168.0.115 system.adapter.labcom.0 : labcom : raspberrypi-Master - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi-Master - enabled, port: 54321 + system.adapter.node-red.0 : node-red : raspberrypi-Master - enabled, port: 1880, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : raspberrypi-Master - enabled + system.adapter.parcel.0 : parcel : raspberrypi-Master - enabled + system.adapter.sayit.0 : sayit : raspberrypi-Master - enabled + system.adapter.scenes.0 : scenes : raspberrypi-Master - enabled + system.adapter.simple-api.0 : simple-api : raspberrypi-Master - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartmeter.0 : smartmeter : raspberrypi - enabled + system.adapter.smartmeter.1 : smartmeter : raspberrypi - enabled + system.adapter.socketio.0 : socketio : raspberrypi-Master - enabled, port: 8084, bind: 192.168.0.115, run as: admin + system.adapter.solarlog.0 : solarlog : raspberrypi-Master - enabled, port: 80 system.adapter.sonoff.0 : sonoff : raspberrypi - disabled, port: 1883, bind: 0.0.0.0 system.adapter.sql.0 : sql : raspberrypi-Master - disabled, port: 3306 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi-Master - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi-Master - enabled + system.adapter.tuya.0 : tuya : raspberrypi-Master - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi-Master - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi-Master - enabled system.adapter.vis-weather.0 : vis-weather : raspberrypi-Master - enabled system.adapter.vis.0 : vis : raspberrypi-Master - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi-Master - enabled + system.adapter.web.0 : web : raspberrypi-Master - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.wifilight.0 : wifilight : raspberrypi-Master - disabled + instance is alive Enabled adapters with bindings system.adapter.admin.0 : admin : raspberrypi-Master - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hm-rpc.3 : hm-rpc : raspberrypi-Master - enabled, port: 0 + system.adapter.hm-rpc.4 : hm-rpc : raspberrypi-Master - enabled, port: 0 + system.adapter.hm-rpc.5 : hm-rpc : raspberrypi-Master - enabled, port: 0 + system.adapter.hue.0 : hue : raspberrypi-Master - enabled, port: 80 + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi-Master - enabled, port: 54321 + system.adapter.node-red.0 : node-red : raspberrypi-Master - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspberrypi-Master - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : raspberrypi-Master - enabled, port: 8084, bind: 192.168.0.115, run as: admin + system.adapter.solarlog.0 : solarlog : raspberrypi-Master - enabled, port: 80 + system.adapter.web.0 : web : raspberrypi-Master - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories sources : conf/sources-dist.json online : https://raw.githubusercontent.com/ioBroker/ioBroker.repositories/master/sources-dist.json stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.10.1 , installed 6.10.1 Adapter "alexa2" : 3.25.2 , installed 3.25.2 Adapter "backitup" : 2.8.1 , installed 2.8.1 Adapter "cec2" : 0.1.1 , installed 0.1.1 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "denon" : 1.15.4 , installed 1.15.4 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "history" : 3.0.1 , installed 2.2.6 [Updatable] Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "hue" : 3.10.1 , installed 3.10.0 [Updatable] Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "knx" : 2.0.22 , installed 2.0.22 Adapter "mihome-vacuum": 4.0.0 , installed 4.0.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "node-red" : 4.0.3 , installed 4.0.3 Adapter "openweathermap": 0.3.9 , installed 0.3.9 Adapter "parcel" : 0.0.27 , installed 0.0.27 Adapter "ph803w" : 1.1.1 , installed 1.1.1 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "solarlog" : 2.2.8 , installed 2.2.6 [Updatable] Adapter "sonos" : 2.3.1 , installed 2.3.1 Adapter "spotify-premium": 1.2.2 , installed 1.2.2 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "ws" : 2.5.5 , installed 2.5.5 Objects and States Please stand by - This may take a while Objects: 14467 States: 10597 *** OS-Repositories and Updates *** W: http://raspbian.raspberrypi.org/raspbian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. Hit:1 http://raspbian.raspberrypi.org/raspbian bookworm InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... W: http://raspbian.raspberrypi.org/raspbian/dists/bookworm/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.0.115:8701 0.0.0.0:* LISTEN 1001 62182 7806/io.hm-rpc.5 tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1001 63203 7739/node-red tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11243 552/sshd: /usr/sbin tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 63194 7739/node-red tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 63916 7595/iobroker.js-co tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 61183 7595/iobroker.js-co tcp 0 0 192.168.0.115:2001 0.0.0.0:* LISTEN 1001 61392 7776/io.hm-rpc.3 tcp 0 0 192.168.0.115:2010 0.0.0.0:* LISTEN 1001 63168 7791/io.hm-rpc.4 tcp 0 0 192.168.0.115:8084 0.0.0.0:* LISTEN 1001 65716 8101/io.socketio.0 tcp6 0 0 :::22 :::* LISTEN 0 11245 552/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 65757 8135/io.simple-api. tcp6 0 0 :::8082 :::* LISTEN 1001 66688 8086/io.web.0 tcp6 0 0 :::61991 :::* LISTEN 1001 65580 8011/io.harmony.0 udp 0 0 192.168.0.115:40058 0.0.0.0:* 1001 80043 8161/io.knx.0 udp 0 0 192.168.0.115:52383 0.0.0.0:* 1001 81433 8161/io.knx.0 udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 62372 7913/io.mihome-vacu udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11059 392/avahi-daemon: r udp 0 0 192.168.0.115:57675 0.0.0.0:* 1001 63229 7739/node-red udp 0 0 192.168.0.115:46558 0.0.0.0:* 1001 66752 8161/io.knx.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 64680 7898/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 64681 7898/io.tuya.0 udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 65581 8011/io.harmony.0 udp 0 0 192.168.0.115:35494 0.0.0.0:* 1001 80850 8161/io.knx.0 udp 0 0 192.168.0.115:43869 0.0.0.0:* 1001 78660 8161/io.knx.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 63202 7739/node-red udp 0 0 0.0.0.0:54151 0.0.0.0:* 108 11061 392/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15451 800/dhcpcd udp6 0 0 :::52333 :::* 108 11062 392/avahi-daemon: r udp6 0 0 :::5353 :::* 108 11060 392/avahi-daemon: r udp6 0 0 :::546 :::* 0 13152 800/dhcpcd *** Log File - Last 25 Lines *** 2023-10-25 17:00:15.764 - info: daswetter.0 (9535) cleaned everything up... 2023-10-25 17:00:15.780 - info: host.raspberrypi-Master instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-10-25 17:00:18.622 - info: ical.0 (9565) Terminated (NO_ERROR): Without reason 2023-10-25 17:00:19.153 - info: host.raspberrypi-Master instance system.adapter.ical.0 terminated with code 0 (NO_ERROR) 2023-10-25 17:01:00.068 - info: host.raspberrypi-Master instance system.adapter.dwd.0 started with pid 9582 2023-10-25 17:01:03.129 - info: dwd.0 (9582) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.18.2, js-controller: 5.0.12 2023-10-25 17:01:04.128 - info: dwd.0 (9582) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-10-25 17:01:04.666 - info: host.raspberrypi-Master instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-10-25 17:02:00.090 - info: host.raspberrypi-Master instance system.adapter.openweathermap.0 started with pid 9597 2023-10-25 17:02:03.010 - info: openweathermap.0 (9597) starting. Version 0.3.9 in /opt/iobroker/node_modules/iobroker.openweathermap, node: v18.18.2, js-controller: 5.0.12 2023-10-25 17:02:20.699 - info: openweathermap.0 (9597) Terminated (NO_ERROR): Without reason 2023-10-25 17:02:21.232 - info: host.raspberrypi-Master instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2023-10-25 17:02:52.970 - info: host.raspberrypi-Master instance system.adapter.admin.0 started with pid 9666 2023-10-25 17:02:57.004 - info: admin.0 (9666) starting. Version 6.10.1 in /opt/iobroker/node_modules/iobroker.admin, node: v18.18.2, js-controller: 5.0.12 2023-10-25 17:02:57.066 - info: admin.0 (9666) requesting all objects 2023-10-25 17:03:00.301 - info: admin.0 (9666) received all objects 2023-10-25 17:03:01.130 - info: admin.0 (9666) Request actual repository... 2023-10-25 17:03:01.178 - error: admin.0 (9666) Cannot create web-server: Error: error:05800074:x509 certificate routines::key values mismatch 2023-10-25 17:03:01.182 - info: admin.0 (9666) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-10-25 17:03:01.551 - error: admin.0 (9666) Cannot update news: TypeError: newNews.forEach is not a function 2023-10-25 17:03:01.772 - warn: admin.0 (9666) Cannot check node.js/npm version 2023-10-25 17:03:02.162 - info: admin.0 (9666) terminating https server on port 8081 2023-10-25 17:03:02.565 - info: host.raspberrypi-Master Updating repository "stable" under "http://download.iobroker.net/sources-dist.json" 2023-10-25 17:03:02.938 - info: host.raspberrypi-Master instance system.adapter.admin.0 terminated by request of the instance itself and will not be restarted, before user restarts it. 2023-10-25 17:03:02.939 - info: host.raspberrypi-Master Do not restart adapter system.adapter.admin.0 because desired by instance============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
Copy text starting here:
======================= SUMMARY ======================= v.2023-10-10 Static hostname: raspberrypi-Master Icon name: computer Operating System: Raspbian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: armhf Timezone: Europe/London (BST, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 3 Nodejs-Installation: /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 Recommended versions are nodejs and npm Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 1.9G 1.5G 112M 36K 348M 389M Swap: 104M 104M 245K Total: 2.0G 1.7G 112M Active iob-Instances: 34 Active repo(s): stable ioBroker Core: js-controller 5.0.12 admin 6.10.1 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: system.adapter.admin.0 : admin : raspberrypi-Master - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.web.0 : web : raspberrypi-Master - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 14467 States: 10597 Size of iob-Database: 30M /opt/iobroker/iobroker-data/objects.jsonl 4.0M /opt/iobroker/iobroker-data/states.jsonl=================== END OF SUMMARY ====================
=== Mark text until here for copying === pi@raspberrypi-Master:~ $Cannot create web-server: Error: error:05800074:x509 certificate routines::key values mismatchbin den Weg über eine zusätzliche Admin Instance gegangen. Ohne SSL geht es. Sobald ich das aktiviere, bekomme ich den Adapter nicht mehr grün.
Raspberry Matic (RP3), LIVE PV Monitoring mit Smartmeter, Poolsteuerung mit NodeRed, KNX Ausbau (ersetzt stückweise HM & klassische Installation), ioBroker Multihost (RP4 &RP2), Visu mit VIS
-
Cannot create web-server: Error: error:05800074:x509 certificate routines::key values mismatchbin den Weg über eine zusätzliche Admin Instance gegangen. Ohne SSL geht es. Sobald ich das aktiviere, bekomme ich den Adapter nicht mehr grün.
Wenn ich helfen konnte, dann Daumen hoch (Pfeil nach oben)!
Danke.
gute Forenbeiträge: https://forum.iobroker.net/topic/51555/hinweise-f%C3%BCr-gute-forenbeitr%C3%A4ge
ScreenToGif :https://www.screentogif.com/downloads.html -
@bahnuhr sagte in Admin Webseite nicht mehr erreichbar:
@schneidy76 sagte in Admin Webseite nicht mehr erreichbar:
SSL
was haste denn vor mit dem ssl ?
@schneidy76
Eben.
Was willst Du mit SSL im Heimnetz? -
Ich nutze unter anderen den KNX Adapter (habe eine immer steigende Anzahl an KNX Teilnehmer bei uns im Haus). Unter anderen auch KNX-RF Geräte. Eine KNX-RF Linie benötigt eine Domain, ab da muss ich das KNX Projekt verschlüsseln.
Um das Projekt, und damit die Gruppenadressen, korrekt einzulesen, benötige ich ebenfalls eine SSL Verschlüsselung von ioBroker.
Warum, keine Ahnung, aber es ist eben so.... :smirk:
Das Ganze lief ja auch 2 Jahre ohne Probleme.VG Torsten
Raspberry Matic (RP3), LIVE PV Monitoring mit Smartmeter, Poolsteuerung mit NodeRed, KNX Ausbau (ersetzt stückweise HM & klassische Installation), ioBroker Multihost (RP4 &RP2), Visu mit VIS
-
Ich nutze unter anderen den KNX Adapter (habe eine immer steigende Anzahl an KNX Teilnehmer bei uns im Haus). Unter anderen auch KNX-RF Geräte. Eine KNX-RF Linie benötigt eine Domain, ab da muss ich das KNX Projekt verschlüsseln.
Um das Projekt, und damit die Gruppenadressen, korrekt einzulesen, benötige ich ebenfalls eine SSL Verschlüsselung von ioBroker.
Warum, keine Ahnung, aber es ist eben so.... :smirk:
Das Ganze lief ja auch 2 Jahre ohne Probleme.VG Torsten
@schneidy76 sagte in Admin Webseite nicht mehr erreichbar:
aber es ist eben so....
Na, wenns so is, dann isses so.
Ich bin damit aber raus.
Wenn ich helfen konnte, dann Daumen hoch (Pfeil nach oben)!
Danke.
gute Forenbeiträge: https://forum.iobroker.net/topic/51555/hinweise-f%C3%BCr-gute-forenbeitr%C3%A4ge
ScreenToGif :https://www.screentogif.com/downloads.html -
@schneidy76 sagte in Admin Webseite nicht mehr erreichbar:
aber es ist eben so....
Na, wenns so is, dann isses so.
Ich bin damit aber raus.
@bahnuhr sagte in Admin Webseite nicht mehr erreichbar:
Ich bin damit aber raus.
Ich auch.
Security sucks! :-(
-
@schneidy76 sagte in Admin Webseite nicht mehr erreichbar:
aber es ist eben so....
Na, wenns so is, dann isses so.
Ich bin damit aber raus.
@bahnuhr Trotzdem Danke
-
@bahnuhr sagte in Admin Webseite nicht mehr erreichbar:
Ich bin damit aber raus.
Ich auch.
Security sucks! :-(
@codierknecht ich habe den Betreff mal aktualisiert, vielleicht kann ja jemand helfen
-
@schneidy76 sagte in Admin Webseite nicht mehr erreichbar / SSL Keys defekt?:
bin den Weg über eine zusätzliche Admin Instance gegangen. Ohne SSL geht es. Sobald ich das aktiviere, bekomme ich den Adapter nicht mehr grün.
Wenn du jetzt eine weitere Admin-Instanz am Start hast, kannst du doch jetzt mal das Debug Log der Instanz "0" aktivieren, diese Instanz neu starten und das Log (nicht "iob diag"!) hier posten. Eine entsprechende Frage von @Thomas-Braun hattest du noch nicht beantwortet.
-
@schneidy76 sagte in Admin Webseite nicht mehr erreichbar / SSL Keys defekt?:
bin den Weg über eine zusätzliche Admin Instance gegangen. Ohne SSL geht es. Sobald ich das aktiviere, bekomme ich den Adapter nicht mehr grün.
Wenn du jetzt eine weitere Admin-Instanz am Start hast, kannst du doch jetzt mal das Debug Log der Instanz "0" aktivieren, diese Instanz neu starten und das Log (nicht "iob diag"!) hier posten. Eine entsprechende Frage von @Thomas-Braun hattest du noch nicht beantwortet.
@marc-berg said in Admin Webseite nicht mehr erreichbar / SSL Keys defekt?:
Debug Log der Instanz "0" aktivieren
Hallo Marc,
stelle ich den Log auf Debug um und starte die Admin.0 Instance mit SSL Authentifizierung, bekomme ich trotz den nicht startenden Adapter keine Meldung ins Log.
Also zurück auf INFO?Raspberry Matic (RP3), LIVE PV Monitoring mit Smartmeter, Poolsteuerung mit NodeRed, KNX Ausbau (ersetzt stückweise HM & klassische Installation), ioBroker Multihost (RP4 &RP2), Visu mit VIS
-
@marc-berg said in Admin Webseite nicht mehr erreichbar / SSL Keys defekt?:
Debug Log der Instanz "0" aktivieren
Hallo Marc,
stelle ich den Log auf Debug um und starte die Admin.0 Instance mit SSL Authentifizierung, bekomme ich trotz den nicht startenden Adapter keine Meldung ins Log.
Also zurück auf INFO?@schneidy76 sagte in Admin Webseite nicht mehr erreichbar / SSL Keys defekt?:
bekomme ich trotz den nicht startenden Adapter keine Meldung ins Log
Gegenprobe: bekommst du bei der Instanz.1 Meldungen im Log, wenn du auf "debug" schaltest?
-
@schneidy76 sagte in Admin Webseite nicht mehr erreichbar / SSL Keys defekt?:
bekomme ich trotz den nicht startenden Adapter keine Meldung ins Log
Gegenprobe: bekommst du bei der Instanz.1 Meldungen im Log, wenn du auf "debug" schaltest?
@marc-berg
Gegenprobe 1: Admin.0 steht auf "Alles" und nichts kommt an
Gegenprobe 2: Admin.1 steht auf "Debug" Meldungen mit Level Debug kommen- Habe ein Update (Edit: auf Admin 6.12.0) angeboten bekommen und dieses ausgeführt. Augenscheinlich durchgelaufen, aber Fehler:
SyntaxError: Unexpected token '<', "<!doctype "... is not valid JSONim Dialogfenster.
Vg Torsten
-
@marc-berg
Gegenprobe 1: Admin.0 steht auf "Alles" und nichts kommt an
Gegenprobe 2: Admin.1 steht auf "Debug" Meldungen mit Level Debug kommen- Habe ein Update (Edit: auf Admin 6.12.0) angeboten bekommen und dieses ausgeführt. Augenscheinlich durchgelaufen, aber Fehler:
SyntaxError: Unexpected token '<', "<!doctype "... is not valid JSONim Dialogfenster.
Vg Torsten
Zwischenstand:
bin nun auf einen RP4 mit 8GB RAM umgestiegen.
Es gab einige Probleme beim Zurückspielen des Backups, die ich aber lösen konnte.
Jetzt läuft der ioBroker wieder stabil mit genügend Reserven.Ich habe derzeit (zum Testen) 2 Admin Instanzen laufen:
Admin.0 mit https und Authentifizierung Port 8081
Admin.1 ohne SSL Port 8089Instanz Admin.0 konnte ich starten, nachdem ich den Befehl:
iob cert creategefunden habe.
Ich kann aber noch nicht per https zugreifen. Die Browser melden zurück:
192.x.x.x erfüllt die Sicherheitsstandards nicht. ERR_SSL_SERVER_CERT_BAD_FORMATHat jemand ne Idee?
Danke und VG Torsten
Raspberry Matic (RP3), LIVE PV Monitoring mit Smartmeter, Poolsteuerung mit NodeRed, KNX Ausbau (ersetzt stückweise HM & klassische Installation), ioBroker Multihost (RP4 &RP2), Visu mit VIS
-
Zwischenstand:
bin nun auf einen RP4 mit 8GB RAM umgestiegen.
Es gab einige Probleme beim Zurückspielen des Backups, die ich aber lösen konnte.
Jetzt läuft der ioBroker wieder stabil mit genügend Reserven.Ich habe derzeit (zum Testen) 2 Admin Instanzen laufen:
Admin.0 mit https und Authentifizierung Port 8081
Admin.1 ohne SSL Port 8089Instanz Admin.0 konnte ich starten, nachdem ich den Befehl:
iob cert creategefunden habe.
Ich kann aber noch nicht per https zugreifen. Die Browser melden zurück:
192.x.x.x erfüllt die Sicherheitsstandards nicht. ERR_SSL_SERVER_CERT_BAD_FORMATHat jemand ne Idee?
Danke und VG Torsten
@schneidy76 sagte in Admin per https nicht erreichbar / Zertifikatprobleme:
ERR_SSL_SERVER_CERT_BAD_FORMAT
Ich weiß ja nicht, welchen Browser du nutzt, normalerweise muss man ja das Verwenden von selbstsignierten Zertifikaten am Browser explizit bestätigen.
Ein weiterer Klassiker bei solchen Fehlern ist ein falsch eingestellte Zeitzone und/oder Zeit. Prüf das mal.
822
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge