NEWS
[gelöst] Hilfe bei Multihost
ioBroker Allgemein
80
Beiträge
9
Kommentatoren
11.6k
Aufrufe
7
Watching
-
@fredf Das soll der 2. Slave werden aber zum Testen habe ich den jetzt erstmal neu aufgesetzt. Im Moment ist der noch stand alone. Aber wenn ich hier versuche "iobroker multihost enable" bleibt der auch so hängen wie oben beschrieben. Das komische ist ja, dass das ja mal alles ohne Probleme vor 5 Monaten bei meinem anderen beiden Raspis mit iobroker funktioniert hat. Aber wenn ich das jetzt an meinem Master probiere zeigt sich das gleiche Bild. Bleibt auch hängen. Ich habe keine Ahnung wie es weitergehen kann.
@pjo123456 sagte in Hilfe bei Multihost:
neu aufgesetzt. Im Moment ist der noch stand alone
Auf dem Slave sollten vor der Kopplung keine Adapter installiert sein.
@pjo123456 sagte in Hilfe bei Multihost:
Ich habe keine Ahnung wie es weitergehen kann.
u.a. mit
iob setup custom@pjo123456 sagte in Hilfe bei Multihost:
Please check the binding of the configured jsonl server to allow remote connections.
ich hab noch nicht mit jsonl gearbeitet, diese Meldung kenne ich von redis.
Da muss die config angepasst werden.Ob und wie das bei jsonl geht, weiß ich nicht
-
@pjo123456 sagte in Hilfe bei Multihost:
neu aufgesetzt. Im Moment ist der noch stand alone
Auf dem Slave sollten vor der Kopplung keine Adapter installiert sein.
@pjo123456 sagte in Hilfe bei Multihost:
Ich habe keine Ahnung wie es weitergehen kann.
u.a. mit
iob setup custom@pjo123456 sagte in Hilfe bei Multihost:
Please check the binding of the configured jsonl server to allow remote connections.
ich hab noch nicht mit jsonl gearbeitet, diese Meldung kenne ich von redis.
Da muss die config angepasst werden.Ob und wie das bei jsonl geht, weiß ich nicht
Also Adapter sind nur die Standardsachen drauf. Admin, Backitup und Discovery.
War sonst auch so. Habe dann einfach iobroker multihost enable am Master eingegeben und am Slave iobroker multihost Connect und fertig war die Sache. Jetzt kommt ich am Master ja schon nicht mehr mal wieder zum Prompt zurück nach iobroker multihost enable. Der steht da bis ich mit Strg+C abbreche.Moin aus dem Norden…
-
Also Adapter sind nur die Standardsachen drauf. Admin, Backitup und Discovery.
War sonst auch so. Habe dann einfach iobroker multihost enable am Master eingegeben und am Slave iobroker multihost Connect und fertig war die Sache. Jetzt kommt ich am Master ja schon nicht mehr mal wieder zum Prompt zurück nach iobroker multihost enable. Der steht da bis ich mit Strg+C abbreche.@pjo123456 sagte in Hilfe bei Multihost:
Also Adapter sind nur die Standardsachen drauf. Admin, Backitup und Discovery.
kannst du alle löschen.
@pjo123456 sagte in Hilfe bei Multihost:
Habe dann einfach iobroker multihost enable am Master eingegeben und am Slave iobroker multihost Connect und fertig war die Sache. Jetzt kommt ich am Master ja schon nicht mehr mal wieder zum Prompt zurück nach iobroker multihost enable. Der steht da bis ich mit Strg+C abbreche.
das wissen wir.
Die Doku kennst du sicherlich
https://www.iobroker.net/#de/documentation/config/multihost.md -
@pjo123456 sagte in Hilfe bei Multihost:
Also Adapter sind nur die Standardsachen drauf. Admin, Backitup und Discovery.
kannst du alle löschen.
@pjo123456 sagte in Hilfe bei Multihost:
Habe dann einfach iobroker multihost enable am Master eingegeben und am Slave iobroker multihost Connect und fertig war die Sache. Jetzt kommt ich am Master ja schon nicht mehr mal wieder zum Prompt zurück nach iobroker multihost enable. Der steht da bis ich mit Strg+C abbreche.
das wissen wir.
Die Doku kennst du sicherlich
https://www.iobroker.net/#de/documentation/config/multihost.md -
@homoran Ja diese Anleitung kenne ich. Habe auch alles gemacht aber es ändert nichts. Bleibt trotzdem hängen.
@pjo123456 sagte in Hilfe bei Multihost:
Habe auch alles gemacht
wo ist dann der output zu
@homoran sagte in Hilfe bei Multihost:
u.a. mit
iob setup customund bitte in code-tags!
keine Screenshots von Konsolentextwenn ich das trotzdem richtig entziffere stehen da mindestens 2 Anweisungen.
hast du diese befolgt? -
@pjo123456 sagte in Hilfe bei Multihost:
Habe auch alles gemacht
wo ist dann der output zu
@homoran sagte in Hilfe bei Multihost:
u.a. mit
iob setup customund bitte in code-tags!
keine Screenshots von Konsolentextwenn ich das trotzdem richtig entziffere stehen da mindestens 2 Anweisungen.
hast du diese befolgt?pi@ioBroker-Master-neu:~ $ iobroker setup custom Current configuration: - Objects database: - Type: file - Host/Unix Socket: 0.0.0.0 - Port: 9001 - States database: - Type: file - Host/Unix Socket: 0.0.0.0 - Port: 9000 - Data Directory: ../../iobroker-data/ Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [file]: j Host / Unix Socket of objects DB(jsonl), default[127.0.0.1]: 0.0.0.0 Port of objects DB(jsonl), default[9001]: Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [jsonl]: j Host / Unix Socket of states DB (jsonl), default[0.0.0.0]: 0.0.0.0 Port of states DB (jsonl), default[9000]: Data directory (file), default[../../iobroker-data/]: Host name of this machine [ioBroker-Master-neu]: This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y Explicit migration from file to jsonl is not necessary, skipping... updating conf/iobroker.json pi@ioBroker-Master-neu:~ $ iobroker multihost enable Please check the binding of the configured jsonl server to allow remote connections. No configuration change needed. Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0Mit (j)son und (f)ile probiert. Bei beiden das gleiche Ergebnis.
pi@ioBroker-Master-neu:~ $ iobroker setup custom Current configuration: - Objects database: - Type: file - Host/Unix Socket: 127.0.0.1 - Port: 9001 - States database: - Type: file - Host/Unix Socket: 127.0.0.1 - Port: 9000 - Data Directory: ../../iobroker-data/ Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [file]: f Host / Unix Socket of objects DB(file), default[127.0.0.1]: 0.0.0.0 Port of objects DB(file), default[9001]: Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [file]: f Host / Unix Socket of states DB (file), default[0.0.0.0]: Port of states DB (file), default[9000]: Data directory (file), default[../../iobroker-data/]: Host name of this machine [ioBroker-Master-neu]: updating conf/iobroker.json pi@ioBroker-Master-neu:~ $ iobroker restart pi@ioBroker-Master-neu:~ $ iobroker multihost enable Cannot read system.config: null (OK when migrating or restoring) Please check the binding of the configured file server to allow remote connections. No configuration change needed. Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: file on 0.0.0.0 States: file on 0.0.0.0Moin aus dem Norden…
-
pi@ioBroker-Master-neu:~ $ iobroker setup custom Current configuration: - Objects database: - Type: file - Host/Unix Socket: 0.0.0.0 - Port: 9001 - States database: - Type: file - Host/Unix Socket: 0.0.0.0 - Port: 9000 - Data Directory: ../../iobroker-data/ Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [file]: j Host / Unix Socket of objects DB(jsonl), default[127.0.0.1]: 0.0.0.0 Port of objects DB(jsonl), default[9001]: Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [jsonl]: j Host / Unix Socket of states DB (jsonl), default[0.0.0.0]: 0.0.0.0 Port of states DB (jsonl), default[9000]: Data directory (file), default[../../iobroker-data/]: Host name of this machine [ioBroker-Master-neu]: This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y Explicit migration from file to jsonl is not necessary, skipping... updating conf/iobroker.json pi@ioBroker-Master-neu:~ $ iobroker multihost enable Please check the binding of the configured jsonl server to allow remote connections. No configuration change needed. Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0Mit (j)son und (f)ile probiert. Bei beiden das gleiche Ergebnis.
pi@ioBroker-Master-neu:~ $ iobroker setup custom Current configuration: - Objects database: - Type: file - Host/Unix Socket: 127.0.0.1 - Port: 9001 - States database: - Type: file - Host/Unix Socket: 127.0.0.1 - Port: 9000 - Data Directory: ../../iobroker-data/ Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [file]: f Host / Unix Socket of objects DB(file), default[127.0.0.1]: 0.0.0.0 Port of objects DB(file), default[9001]: Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [file]: f Host / Unix Socket of states DB (file), default[0.0.0.0]: Port of states DB (file), default[9000]: Data directory (file), default[../../iobroker-data/]: Host name of this machine [ioBroker-Master-neu]: updating conf/iobroker.json pi@ioBroker-Master-neu:~ $ iobroker restart pi@ioBroker-Master-neu:~ $ iobroker multihost enable Cannot read system.config: null (OK when migrating or restoring) Please check the binding of the configured file server to allow remote connections. No configuration change needed. Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: file on 0.0.0.0 States: file on 0.0.0.0@pjo123456 sagte in Hilfe bei Multihost:
Please check the binding of the configured jsonl server to allow remote connections.
@pjo123456 sagte in Hilfe bei Multihost:
Host / Unix Socket of objects DB(file), default[127.0.0.1]: 0.0.0.0
falsch! da muss der Master rein.
@pjo123456 sagte in Hilfe bei Multihost:
Host / Unix Socket of states DB (file), default[0.0.0.0]:
da auch
Blödsinn!!
wo ist der slave???
-
@pjo123456 sagte in Hilfe bei Multihost:
Please check the binding of the configured jsonl server to allow remote connections.
@pjo123456 sagte in Hilfe bei Multihost:
Host / Unix Socket of objects DB(file), default[127.0.0.1]: 0.0.0.0
falsch! da muss der Master rein.
@pjo123456 sagte in Hilfe bei Multihost:
Host / Unix Socket of states DB (file), default[0.0.0.0]:
da auch
Blödsinn!!
wo ist der slave???
-
@homoran Ich bin erstmal auf dem Master. Wenn es da nicht weitergeht brauche ich ja noch nicht mit dem Slave anfangen.
-
So wie hier hat es bei mir immer funktioniert. Auch auf dem jetzt laufenden System. Aber eben jetzt nicht mehr.
https://www.youtube.com/watch?v=o2AT1E0FDD0&ab_channel=haus-automatisierung.comEs gibt ne offizielle Anleitung. Und diese hat @Homoran dir gepostet.
Warum nimmst du diese nicht ?Klappt einwandfrei damit.
-
Es gibt ne offizielle Anleitung. Und diese hat @Homoran dir gepostet.
Warum nimmst du diese nicht ?Klappt einwandfrei damit.
@bahnuhr Bei mir aber irgendwie nicht. OK. Alles noch einmal. Ich bin erst einmal nur auf dem Master.
Ich fange noch einmal ganz von vorne an. Image und ioBroker installiert. Also den Master neu aufgesetzt. Alles jungfräulich. Adapter sind nur Admin, Backitup und Discovery installiert, keine anderen zusätzlich installiert. Backitup und Discovery habe ich deinstalliert.
Hier die Ausgabe falls es interessiert:
Inder Anleitung steht: Auf dem Master folgendes Kommando ausführen:
Dieser Schritt ist unbedingt nötig, falls Redis DB im Einsatz ist. In anderen Fällen kann man Ihn nutzen, wenn die automatische Methode (s.u.) fehlschlägt. Dann aber bitte f(ile) statt r(edis) auswählen! Heißt für mich also bei:
Typ of objects DB: f
und bei
Typ of states DB: fRichtig?
Weiter gehts mit iobroker setup custom
login as: pi pi@192.168.1.57's password: Linux ioBrokerMasterNeu 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Oct 4 16:26:13 2023 from 192.168.1.33 pi@ioBrokerMasterNeu:~ $ iobroker setup custom Current configuration: - Objects database: - Type: jsonl - Host/Unix Socket: 0.0.0.0 - Port: 9001 - States database: - Type: jsonl - Host/Unix Socket: 0.0.0.0 - Port: 9000 - Data Directory: ../../iobroker-data/ Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [jsonl]: f Host / Unix Socket of objects DB(file), default[127.0.0.1]: 0.0.0.0 Port of objects DB(file), default[9001]: Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [file]: f Host / Unix Socket of states DB (file), default[0.0.0.0]: Port of states DB (file), default[9000]: Data directory (file), default[../../iobroker-data/]: Host name of this machine [ioBrokerMasterNeu]: This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y Do you want to migrate objects and states from "jsonl/jsonl" to "file/file" [y/N]: y Migrating the objects database will overwrite all objects! Are you sure that this is not a slave host and you want to migrate the data? [y/N]: y Connecting to previous DB "jsonl/jsonl"... Cannot migrate DB while js-controller is still running! Please stop ioBroker and try again. No settings have been changed. pi@ioBrokerMasterNeu:~ $ iobroker stop pi@ioBrokerMasterNeu:~ $ iobroker setup custom Current configuration: - Objects database: - Type: jsonl - Host/Unix Socket: 0.0.0.0 - Port: 9001 - States database: - Type: jsonl - Host/Unix Socket: 0.0.0.0 - Port: 9000 - Data Directory: ../../iobroker-data/ Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [jsonl]: f Host / Unix Socket of objects DB(file), default[127.0.0.1]: 0.0.0.0 Port of objects DB(file), default[9001]: Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [file]: f Host / Unix Socket of states DB (file), default[0.0.0.0]: Port of states DB (file), default[9000]: Data directory (file), default[../../iobroker-data/]: Host name of this machine [ioBrokerMasterNeu]: This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y Do you want to migrate objects and states from "jsonl/jsonl" to "file/file" [y/N]: y Migrating the objects database will overwrite all objects! Are you sure that this is not a slave host and you want to migrate the data? [y/N]: y Connecting to previous DB "jsonl/jsonl"... Creating backup ... This can take some time ... please be patient! host.ioBrokerMasterNeu 62 states saved host.ioBrokerMasterNeu 85 objects saved Backup created: /opt/iobroker/backups/2023_10_04-16_32_04_backupiobroker-migration.tar.gz updating conf/iobroker.json Connecting to new DB "file/file" (can take up to 20s) ... Server Cannot load /opt/iobroker/iobroker-data/objects.json: Database file /opt/iobroker/iobroker-data/objects.json does not exists.. We try last Backup! Server Cannot load /opt/iobroker/iobroker-data/states.json: Database file /opt/iobroker/iobroker-data/states.json does not exists.. We try last Backup! Server Cannot load /opt/iobroker/iobroker-data/objects.json.bak: Database file /opt/iobroker/iobroker-data/objects.json.bak does not exists.. Continue with empty dataset! Server If this is no Migration or initial start please restore the last backup from /opt/iobroker/iobroker-data/backup-objects Server Cannot load /opt/iobroker/iobroker-data/states.json.bak: Database file /opt/iobroker/iobroker-data/states.json.bak does not exists.. Continue with empty dataset! Server If this is no Migration or initial start please restore the last backup from /opt/iobroker/iobroker-data/backup-objects Cannot read system.config: null (OK when migrating or restoring) Restore backup ... This can take some time ... please be patient! iobroker controller daemon is not running host.ioBrokerMasterNeu OK. host.ioBrokerMasterNeu Clear all objects and states... clean 2 objects... clean 2 states... host.ioBrokerMasterNeu done. host.ioBrokerMasterNeu Processed 0/85 objects 85 objects restored. host.ioBrokerMasterNeu Processed 0/62 states 62 states restored. upload [52] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/admin.png admin.png image/png upload [50] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/customComponents.js.map custom/customComponents.js.map application/json upload [40] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/i18n/zh-cn.json custom/i18n/zh-cn.json application/json upload [30] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/node_modules_prop-types_index_js.512eddf9.chunk.js.map custom/static/js/node_modules_prop-types_index_js.512eddf9.chunk.js.map application/json upload [20] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map application/json upload [19] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js application/javascript upload [18] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map application/json upload [17] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_styles_index_js-node_modules_mui_utils_esm_capitalize_js-node_module-19fe07.82575832.chunk.js custom/static/js/vendors-node_modules_mui_styles_index_js-node_modules_mui_utils_esm_capitalize_js-node_module-19fe07.82575832.chunk.js application/javascript upload [16] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_styles_index_js-node_modules_mui_utils_esm_capitalize_js-node_module-19fe07.82575832.chunk.js.map custom/static/js/vendors-node_modules_mui_styles_index_js-node_modules_mui_utils_esm_capitalize_js-node_module-19fe07.82575832.chunk.js.map application/json upload [15] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_styles_withStyles_withStyles_js.6d998ff2.chunk.js custom/static/js/vendors-node_modules_mui_styles_withStyles_withStyles_js.6d998ff2.chunk.js application/javascript upload [14] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_styles_withStyles_withStyles_js.6d998ff2.chunk.js.map custom/static/js/vendors-node_modules_mui_styles_withStyles_withStyles_js.6d998ff2.chunk.js.map application/json upload [13] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dom_index_js.51544235.chunk.js custom/static/js/vendors-node_modules_react-dom_index_js.51544235.chunk.js application/javascript upload [12] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dom_index_js.51544235.chunk.js.map custom/static/js/vendors-node_modules_react-dom_index_js.51544235.chunk.js.map application/json upload [11] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [10] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [9] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [8] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [7] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [6] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [5] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [4] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [3] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [2] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/uk/translations.json i18n/uk/translations.json application/json upload [1] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [0] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/jsonConfig.json5 jsonConfig.json5 application/json5 Reinstalling adapter "admin" from "iobroker.admin@6.10.1" up to date in 4s 22 packages are looking for funding run `npm fund` for details Successfully migrated 84 objects to Redis Sets Backup restored - Migration successful Important: If your system consists of multiple hosts please execute "iobroker upload all" on the master AFTER all other hosts/slaves have also been updated to this states/objects database configuration AND are running! pi@ioBrokerMasterNeu:~ $ iobroker multihost enable Please check the binding of the configured file server to allow remote connections. No configuration change needed. Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: file on 0.0.0.0 States: file on 0.0.0.0Jetzt soll ich ja iobroker restart eingeben. Aber wie? Kein Prompt! Das ist mein Problem wo ich nicht weiterkomme. Bin für alle Vorschläge/Ratschläge offen.
Moin aus dem Norden…
-
@bahnuhr Bei mir aber irgendwie nicht. OK. Alles noch einmal. Ich bin erst einmal nur auf dem Master.
Ich fange noch einmal ganz von vorne an. Image und ioBroker installiert. Also den Master neu aufgesetzt. Alles jungfräulich. Adapter sind nur Admin, Backitup und Discovery installiert, keine anderen zusätzlich installiert. Backitup und Discovery habe ich deinstalliert.
Hier die Ausgabe falls es interessiert:
Inder Anleitung steht: Auf dem Master folgendes Kommando ausführen:
Dieser Schritt ist unbedingt nötig, falls Redis DB im Einsatz ist. In anderen Fällen kann man Ihn nutzen, wenn die automatische Methode (s.u.) fehlschlägt. Dann aber bitte f(ile) statt r(edis) auswählen! Heißt für mich also bei:
Typ of objects DB: f
und bei
Typ of states DB: fRichtig?
Weiter gehts mit iobroker setup custom
login as: pi pi@192.168.1.57's password: Linux ioBrokerMasterNeu 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Oct 4 16:26:13 2023 from 192.168.1.33 pi@ioBrokerMasterNeu:~ $ iobroker setup custom Current configuration: - Objects database: - Type: jsonl - Host/Unix Socket: 0.0.0.0 - Port: 9001 - States database: - Type: jsonl - Host/Unix Socket: 0.0.0.0 - Port: 9000 - Data Directory: ../../iobroker-data/ Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [jsonl]: f Host / Unix Socket of objects DB(file), default[127.0.0.1]: 0.0.0.0 Port of objects DB(file), default[9001]: Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [file]: f Host / Unix Socket of states DB (file), default[0.0.0.0]: Port of states DB (file), default[9000]: Data directory (file), default[../../iobroker-data/]: Host name of this machine [ioBrokerMasterNeu]: This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y Do you want to migrate objects and states from "jsonl/jsonl" to "file/file" [y/N]: y Migrating the objects database will overwrite all objects! Are you sure that this is not a slave host and you want to migrate the data? [y/N]: y Connecting to previous DB "jsonl/jsonl"... Cannot migrate DB while js-controller is still running! Please stop ioBroker and try again. No settings have been changed. pi@ioBrokerMasterNeu:~ $ iobroker stop pi@ioBrokerMasterNeu:~ $ iobroker setup custom Current configuration: - Objects database: - Type: jsonl - Host/Unix Socket: 0.0.0.0 - Port: 9001 - States database: - Type: jsonl - Host/Unix Socket: 0.0.0.0 - Port: 9000 - Data Directory: ../../iobroker-data/ Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [jsonl]: f Host / Unix Socket of objects DB(file), default[127.0.0.1]: 0.0.0.0 Port of objects DB(file), default[9001]: Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [file]: f Host / Unix Socket of states DB (file), default[0.0.0.0]: Port of states DB (file), default[9000]: Data directory (file), default[../../iobroker-data/]: Host name of this machine [ioBrokerMasterNeu]: This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y Do you want to migrate objects and states from "jsonl/jsonl" to "file/file" [y/N]: y Migrating the objects database will overwrite all objects! Are you sure that this is not a slave host and you want to migrate the data? [y/N]: y Connecting to previous DB "jsonl/jsonl"... Creating backup ... This can take some time ... please be patient! host.ioBrokerMasterNeu 62 states saved host.ioBrokerMasterNeu 85 objects saved Backup created: /opt/iobroker/backups/2023_10_04-16_32_04_backupiobroker-migration.tar.gz updating conf/iobroker.json Connecting to new DB "file/file" (can take up to 20s) ... Server Cannot load /opt/iobroker/iobroker-data/objects.json: Database file /opt/iobroker/iobroker-data/objects.json does not exists.. We try last Backup! Server Cannot load /opt/iobroker/iobroker-data/states.json: Database file /opt/iobroker/iobroker-data/states.json does not exists.. We try last Backup! Server Cannot load /opt/iobroker/iobroker-data/objects.json.bak: Database file /opt/iobroker/iobroker-data/objects.json.bak does not exists.. Continue with empty dataset! Server If this is no Migration or initial start please restore the last backup from /opt/iobroker/iobroker-data/backup-objects Server Cannot load /opt/iobroker/iobroker-data/states.json.bak: Database file /opt/iobroker/iobroker-data/states.json.bak does not exists.. Continue with empty dataset! Server If this is no Migration or initial start please restore the last backup from /opt/iobroker/iobroker-data/backup-objects Cannot read system.config: null (OK when migrating or restoring) Restore backup ... This can take some time ... please be patient! iobroker controller daemon is not running host.ioBrokerMasterNeu OK. host.ioBrokerMasterNeu Clear all objects and states... clean 2 objects... clean 2 states... host.ioBrokerMasterNeu done. host.ioBrokerMasterNeu Processed 0/85 objects 85 objects restored. host.ioBrokerMasterNeu Processed 0/62 states 62 states restored. upload [52] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/admin.png admin.png image/png upload [50] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/customComponents.js.map custom/customComponents.js.map application/json upload [40] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/i18n/zh-cn.json custom/i18n/zh-cn.json application/json upload [30] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/node_modules_prop-types_index_js.512eddf9.chunk.js.map custom/static/js/node_modules_prop-types_index_js.512eddf9.chunk.js.map application/json upload [20] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map application/json upload [19] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js application/javascript upload [18] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map application/json upload [17] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_styles_index_js-node_modules_mui_utils_esm_capitalize_js-node_module-19fe07.82575832.chunk.js custom/static/js/vendors-node_modules_mui_styles_index_js-node_modules_mui_utils_esm_capitalize_js-node_module-19fe07.82575832.chunk.js application/javascript upload [16] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_styles_index_js-node_modules_mui_utils_esm_capitalize_js-node_module-19fe07.82575832.chunk.js.map custom/static/js/vendors-node_modules_mui_styles_index_js-node_modules_mui_utils_esm_capitalize_js-node_module-19fe07.82575832.chunk.js.map application/json upload [15] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_styles_withStyles_withStyles_js.6d998ff2.chunk.js custom/static/js/vendors-node_modules_mui_styles_withStyles_withStyles_js.6d998ff2.chunk.js application/javascript upload [14] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_styles_withStyles_withStyles_js.6d998ff2.chunk.js.map custom/static/js/vendors-node_modules_mui_styles_withStyles_withStyles_js.6d998ff2.chunk.js.map application/json upload [13] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dom_index_js.51544235.chunk.js custom/static/js/vendors-node_modules_react-dom_index_js.51544235.chunk.js application/javascript upload [12] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dom_index_js.51544235.chunk.js.map custom/static/js/vendors-node_modules_react-dom_index_js.51544235.chunk.js.map application/json upload [11] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [10] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [9] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [8] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [7] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [6] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [5] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [4] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [3] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [2] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/uk/translations.json i18n/uk/translations.json application/json upload [1] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [0] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/jsonConfig.json5 jsonConfig.json5 application/json5 Reinstalling adapter "admin" from "iobroker.admin@6.10.1" up to date in 4s 22 packages are looking for funding run `npm fund` for details Successfully migrated 84 objects to Redis Sets Backup restored - Migration successful Important: If your system consists of multiple hosts please execute "iobroker upload all" on the master AFTER all other hosts/slaves have also been updated to this states/objects database configuration AND are running! pi@ioBrokerMasterNeu:~ $ iobroker multihost enable Please check the binding of the configured file server to allow remote connections. No configuration change needed. Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: file on 0.0.0.0 States: file on 0.0.0.0Jetzt soll ich ja iobroker restart eingeben. Aber wie? Kein Prompt! Das ist mein Problem wo ich nicht weiterkomme. Bin für alle Vorschläge/Ratschläge offen.
@pjo123456 sagte in Hilfe bei Multihost:
Richtig?
nein!
kannst du zwar machen, sollte auch gehen.
Der Knackpunkt ist, dass es jetzt noch zusätzlich jsonl gibt, das in neueren Installationen Standard anstelle von file ist. -
@pjo123456 sagte in Hilfe bei Multihost:
Richtig?
nein!
kannst du zwar machen, sollte auch gehen.
Der Knackpunkt ist, dass es jetzt noch zusätzlich jsonl gibt, das in neueren Installationen Standard anstelle von file ist.@homoran OK, also json nutzen. Hatte ich auch probiert aber mache ich gerne noch einmal.
Dann sieht es so aus:
pi@ioBrokerMasterNeu:~ $ iobroker setup custom Current configuration: - Objects database: - Type: file - Host/Unix Socket: 0.0.0.0 - Port: 9001 - States database: - Type: file - Host/Unix Socket: 0.0.0.0 - Port: 9000 - Data Directory: ../../iobroker-data/ Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [file]: j Host / Unix Socket of objects DB(jsonl), default[127.0.0.1]: 0.0.0.0 Port of objects DB(jsonl), default[9001]: Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [jsonl]: j Host / Unix Socket of states DB (jsonl), default[0.0.0.0]: Port of states DB (jsonl), default[9000]: Data directory (file), default[../../iobroker-data/]: Host name of this machine [ioBrokerMasterNeu]: This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y Explicit migration from file to jsonl is not necessary, skipping... updating conf/iobroker.json pi@ioBrokerMasterNeu:~ $ iobroker multihost enable Please check the binding of the configured jsonl server to allow remote connections. No configuration change needed. Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0keine Änderung am Problem.
Moin aus dem Norden…
-
@homoran OK, also json nutzen. Hatte ich auch probiert aber mache ich gerne noch einmal.
Dann sieht es so aus:
pi@ioBrokerMasterNeu:~ $ iobroker setup custom Current configuration: - Objects database: - Type: file - Host/Unix Socket: 0.0.0.0 - Port: 9001 - States database: - Type: file - Host/Unix Socket: 0.0.0.0 - Port: 9000 - Data Directory: ../../iobroker-data/ Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [file]: j Host / Unix Socket of objects DB(jsonl), default[127.0.0.1]: 0.0.0.0 Port of objects DB(jsonl), default[9001]: Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [jsonl]: j Host / Unix Socket of states DB (jsonl), default[0.0.0.0]: Port of states DB (jsonl), default[9000]: Data directory (file), default[../../iobroker-data/]: Host name of this machine [ioBrokerMasterNeu]: This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y Explicit migration from file to jsonl is not necessary, skipping... updating conf/iobroker.json pi@ioBrokerMasterNeu:~ $ iobroker multihost enable Please check the binding of the configured jsonl server to allow remote connections. No configuration change needed. Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0keine Änderung am Problem.
@pjo123456 sagte in Hilfe bei Multihost:
keine Änderung am Problem.
bitte
iob diagin der Langfassung!@splatterjoe
von dir bitte auch -
@homoran OK, also json nutzen. Hatte ich auch probiert aber mache ich gerne noch einmal.
Dann sieht es so aus:
pi@ioBrokerMasterNeu:~ $ iobroker setup custom Current configuration: - Objects database: - Type: file - Host/Unix Socket: 0.0.0.0 - Port: 9001 - States database: - Type: file - Host/Unix Socket: 0.0.0.0 - Port: 9000 - Data Directory: ../../iobroker-data/ Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [file]: j Host / Unix Socket of objects DB(jsonl), default[127.0.0.1]: 0.0.0.0 Port of objects DB(jsonl), default[9001]: Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [jsonl]: j Host / Unix Socket of states DB (jsonl), default[0.0.0.0]: Port of states DB (jsonl), default[9000]: Data directory (file), default[../../iobroker-data/]: Host name of this machine [ioBrokerMasterNeu]: This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y Explicit migration from file to jsonl is not necessary, skipping... updating conf/iobroker.json pi@ioBrokerMasterNeu:~ $ iobroker multihost enable Please check the binding of the configured jsonl server to allow remote connections. No configuration change needed. Multihost discovery server: enabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0keine Änderung am Problem.
@pjo123456
so, du zeigst den 1. Teil auf dem Master. Dieser sieht doch ok aus.Und jetzt zeigst du uns den 2. Teil; der auf dem Slave.
Nachtrag:
Ich bin immer nach dieser Anleitung (war die alte Doku von iob) vorgegangen.
Entspricht der neuen Doku (fast). -
@bahnuhr eben nicht. Normalerweise müsste sich nach iobroker multihost enable das Terminal wieder mit dem Prompt melden. Macht es aber nicht. Ich kann ab diesem Punkt außer abbrechen nichts mehr machen. Das war sonst nicht so.
======== Start marking the full check here ========= Skript v.2023-06-20 *** BASE SYSTEM *** Static hostname: ioBrokerMasterNeu Icon name: computer Machine ID: 4236e4b937704469b720130c5fb87437 Boot ID: 0658e2b6522445589c9030e8daf81d71 Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 18:00:50 up 1:34, 3 users, load average: 0.03, 0.13, 0.06 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=44.3'C volt=0.9260V *** Time and Time Zones *** Local time: Wed 2023-10-04 18:00:50 CEST Universal time: Wed 2023-10-04 16:00:50 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 297M 6.9G 35M 597M 7.4G Swap: 99M 0B 99M Total: 7.9G 297M 7.0G 7812 M total memory 298 M used memory 442 M active memory 292 M inactive memory 6916 M free memory 43 M buffer memory 554 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 15G 3.9G 9.9G 29% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 51M 205M 20% /boot tmpfs tmpfs 782M 24K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Oct 4 16:26:00 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:5D:E5:15 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=29c5ba51-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Wed Oct 4 16:26:01 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Oct 4 16:26:01 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Oct 4 16:26:04 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 407M /var/ 127M /var/cache 123M /var/lib 120M /var/cache/apt 68M /var/lib/apt/lists Archived and active journals take up 56.0M in the file system. /opt/iobroker/backups: 1.3M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 27M /opt/iobroker/iobroker-data/ 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static 13M /opt/iobroker/iobroker-data/files/admin.admin/custom 13M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 3.7M /opt/iobroker/iobroker-data/objects.jsonl 3.7M /opt/iobroker/iobroker-data/objects.json.migrated 3.7M /opt/iobroker/iobroker-data/objects.json.bak.migrated 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl No configuration change needed. Multihost discovery server: disabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0 Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: "javascript" not found Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBrokerMasterNeu - enabled, port: 8081, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerMasterNeu - enabled, port: 8081, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.10.1 , installed 6.10.1 Controller "js-controller": 5.0.12 , installed 5.0.12 Objects and States Please stand by - This may take a while Objects: 84 States: 64 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 99 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 23634 2193/iobroker.js-co tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 23627 2193/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15672 575/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15692 539/cupsd tcp6 0 0 :::22 :::* LISTEN 0 15682 575/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 15691 539/cupsd tcp6 0 0 :::8081 :::* LISTEN 1001 21216 2211/io.admin.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 15092 585/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 15500 400/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16530 470/dhcpcd udp 0 0 0.0.0.0:33120 0.0.0.0:* 108 15502 400/avahi-daemon: r udp6 0 0 :::5353 :::* 108 15501 400/avahi-daemon: r udp6 0 0 :::43899 :::* 108 15503 400/avahi-daemon: r udp6 0 0 :::546 :::* 0 19342 470/dhcpcd *** Log File - Last 25 Lines *** 2023-10-04 17:23:55.859 - info: host.ioBrokerMasterNeu ip addresses: 192.168.1.57 2a02:8108:1380:68fc:67ae:2430:12be:c07d fe80::8d7:83f7:8a85:e666 2023-10-04 17:23:56.490 - info: host.ioBrokerMasterNeu connected to Objects and States 2023-10-04 17:23:56.517 - info: host.ioBrokerMasterNeu added notifications configuration of host 2023-10-04 17:23:56.934 - info: host.ioBrokerMasterNeu Delete host system.host.ioBrokerMasterNeu 2023-10-04 17:23:56.963 - info: host.ioBrokerMasterNeu Multi-host discovery server: service started on 0.0.0.0:50005 2023-10-04 17:23:57.008 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.nodeCurrent" 2023-10-04 17:23:57.015 - info: host.ioBrokerMasterNeu 1 instance found 2023-10-04 17:23:57.022 - info: host.ioBrokerMasterNeu starting 1 instance 2023-10-04 17:23:57.046 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.nodeNewest" 2023-10-04 17:23:57.067 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.nodeNewestNext" 2023-10-04 17:23:57.086 - info: host.ioBrokerMasterNeu instance system.adapter.admin.0 started with pid 2211 2023-10-04 17:23:57.138 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.npmCurrent" 2023-10-04 17:23:57.147 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.npmNewest" 2023-10-04 17:23:57.155 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.npmNewestNext" 2023-10-04 17:23:57.164 - info: host.ioBrokerMasterNeu Some obsolete host states deleted. 2023-10-04 17:23:59.661 - info: admin.0 (2211) starting. Version 6.10.1 in /opt/iobroker/node_modules/iobroker.admin, node: v18.17.1, js-controller: 5.0.12 2023-10-04 17:23:59.720 - info: admin.0 (2211) requesting all objects 2023-10-04 17:24:00.345 - info: admin.0 (2211) received all objects 2023-10-04 17:24:00.766 - info: admin.0 (2211) socket.io server listening on port 8081 2023-10-04 17:24:00.771 - info: admin.0 (2211) http server listening on port 8081 2023-10-04 17:24:00.772 - info: admin.0 (2211) Use link "http://127.0.0.1:8081" to configure. 2023-10-04 17:24:11.859 - info: admin.0 (2211) ==> Connected system.user.admin from ::ffff:192.168.1.33 2023-10-04 17:24:30.602 - info: host.ioBrokerMasterNeu Multi-host discovery server: service started on 0.0.0.0:50005 2023-10-04 17:25:34.206 - info: admin.0 (2211) <== Disconnect system.user.admin from ::ffff:192.168.1.33 admin 2023-10-04 17:39:30.602 - info: host.ioBrokerMasterNeu Multihost discovery server stopped after 15 minutes, because only temporarily activatedMoin aus dem Norden…
-
@bahnuhr eben nicht. Normalerweise müsste sich nach iobroker multihost enable das Terminal wieder mit dem Prompt melden. Macht es aber nicht. Ich kann ab diesem Punkt außer abbrechen nichts mehr machen. Das war sonst nicht so.
======== Start marking the full check here ========= Skript v.2023-06-20 *** BASE SYSTEM *** Static hostname: ioBrokerMasterNeu Icon name: computer Machine ID: 4236e4b937704469b720130c5fb87437 Boot ID: 0658e2b6522445589c9030e8daf81d71 Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 18:00:50 up 1:34, 3 users, load average: 0.03, 0.13, 0.06 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=44.3'C volt=0.9260V *** Time and Time Zones *** Local time: Wed 2023-10-04 18:00:50 CEST Universal time: Wed 2023-10-04 16:00:50 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 297M 6.9G 35M 597M 7.4G Swap: 99M 0B 99M Total: 7.9G 297M 7.0G 7812 M total memory 298 M used memory 442 M active memory 292 M inactive memory 6916 M free memory 43 M buffer memory 554 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 15G 3.9G 9.9G 29% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 51M 205M 20% /boot tmpfs tmpfs 782M 24K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Oct 4 16:26:00 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:5D:E5:15 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=29c5ba51-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Wed Oct 4 16:26:01 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Oct 4 16:26:01 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Oct 4 16:26:04 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 407M /var/ 127M /var/cache 123M /var/lib 120M /var/cache/apt 68M /var/lib/apt/lists Archived and active journals take up 56.0M in the file system. /opt/iobroker/backups: 1.3M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 27M /opt/iobroker/iobroker-data/ 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static 13M /opt/iobroker/iobroker-data/files/admin.admin/custom 13M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 3.7M /opt/iobroker/iobroker-data/objects.jsonl 3.7M /opt/iobroker/iobroker-data/objects.json.migrated 3.7M /opt/iobroker/iobroker-data/objects.json.bak.migrated 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl No configuration change needed. Multihost discovery server: disabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0 Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: "javascript" not found Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBrokerMasterNeu - enabled, port: 8081, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerMasterNeu - enabled, port: 8081, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.10.1 , installed 6.10.1 Controller "js-controller": 5.0.12 , installed 5.0.12 Objects and States Please stand by - This may take a while Objects: 84 States: 64 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 99 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 23634 2193/iobroker.js-co tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 23627 2193/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15672 575/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15692 539/cupsd tcp6 0 0 :::22 :::* LISTEN 0 15682 575/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 15691 539/cupsd tcp6 0 0 :::8081 :::* LISTEN 1001 21216 2211/io.admin.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 15092 585/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 15500 400/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16530 470/dhcpcd udp 0 0 0.0.0.0:33120 0.0.0.0:* 108 15502 400/avahi-daemon: r udp6 0 0 :::5353 :::* 108 15501 400/avahi-daemon: r udp6 0 0 :::43899 :::* 108 15503 400/avahi-daemon: r udp6 0 0 :::546 :::* 0 19342 470/dhcpcd *** Log File - Last 25 Lines *** 2023-10-04 17:23:55.859 - info: host.ioBrokerMasterNeu ip addresses: 192.168.1.57 2a02:8108:1380:68fc:67ae:2430:12be:c07d fe80::8d7:83f7:8a85:e666 2023-10-04 17:23:56.490 - info: host.ioBrokerMasterNeu connected to Objects and States 2023-10-04 17:23:56.517 - info: host.ioBrokerMasterNeu added notifications configuration of host 2023-10-04 17:23:56.934 - info: host.ioBrokerMasterNeu Delete host system.host.ioBrokerMasterNeu 2023-10-04 17:23:56.963 - info: host.ioBrokerMasterNeu Multi-host discovery server: service started on 0.0.0.0:50005 2023-10-04 17:23:57.008 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.nodeCurrent" 2023-10-04 17:23:57.015 - info: host.ioBrokerMasterNeu 1 instance found 2023-10-04 17:23:57.022 - info: host.ioBrokerMasterNeu starting 1 instance 2023-10-04 17:23:57.046 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.nodeNewest" 2023-10-04 17:23:57.067 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.nodeNewestNext" 2023-10-04 17:23:57.086 - info: host.ioBrokerMasterNeu instance system.adapter.admin.0 started with pid 2211 2023-10-04 17:23:57.138 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.npmCurrent" 2023-10-04 17:23:57.147 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.npmNewest" 2023-10-04 17:23:57.155 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.npmNewestNext" 2023-10-04 17:23:57.164 - info: host.ioBrokerMasterNeu Some obsolete host states deleted. 2023-10-04 17:23:59.661 - info: admin.0 (2211) starting. Version 6.10.1 in /opt/iobroker/node_modules/iobroker.admin, node: v18.17.1, js-controller: 5.0.12 2023-10-04 17:23:59.720 - info: admin.0 (2211) requesting all objects 2023-10-04 17:24:00.345 - info: admin.0 (2211) received all objects 2023-10-04 17:24:00.766 - info: admin.0 (2211) socket.io server listening on port 8081 2023-10-04 17:24:00.771 - info: admin.0 (2211) http server listening on port 8081 2023-10-04 17:24:00.772 - info: admin.0 (2211) Use link "http://127.0.0.1:8081" to configure. 2023-10-04 17:24:11.859 - info: admin.0 (2211) ==> Connected system.user.admin from ::ffff:192.168.1.33 2023-10-04 17:24:30.602 - info: host.ioBrokerMasterNeu Multi-host discovery server: service started on 0.0.0.0:50005 2023-10-04 17:25:34.206 - info: admin.0 (2211) <== Disconnect system.user.admin from ::ffff:192.168.1.33 admin 2023-10-04 17:39:30.602 - info: host.ioBrokerMasterNeu Multihost discovery server stopped after 15 minutes, because only temporarily activated -
@thomas-braun OK, mache ich. Aber ich denek jetzt fast, dass das Problem woanders liegt. Denn auf meinem laufenden System sieht es genau so aus:
Edit: Habe die Updates gemacht und Desktop ausgeschaltet. Keine Änderung.
Moin aus dem Norden…
-
@bahnuhr eben nicht. Normalerweise müsste sich nach iobroker multihost enable das Terminal wieder mit dem Prompt melden. Macht es aber nicht. Ich kann ab diesem Punkt außer abbrechen nichts mehr machen. Das war sonst nicht so.
======== Start marking the full check here ========= Skript v.2023-06-20 *** BASE SYSTEM *** Static hostname: ioBrokerMasterNeu Icon name: computer Machine ID: 4236e4b937704469b720130c5fb87437 Boot ID: 0658e2b6522445589c9030e8daf81d71 Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 18:00:50 up 1:34, 3 users, load average: 0.03, 0.13, 0.06 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=44.3'C volt=0.9260V *** Time and Time Zones *** Local time: Wed 2023-10-04 18:00:50 CEST Universal time: Wed 2023-10-04 16:00:50 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 297M 6.9G 35M 597M 7.4G Swap: 99M 0B 99M Total: 7.9G 297M 7.0G 7812 M total memory 298 M used memory 442 M active memory 292 M inactive memory 6916 M free memory 43 M buffer memory 554 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 15G 3.9G 9.9G 29% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 51M 205M 20% /boot tmpfs tmpfs 782M 24K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Oct 4 16:26:00 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:5D:E5:15 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=29c5ba51-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Wed Oct 4 16:26:01 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Oct 4 16:26:01 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Oct 4 16:26:04 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 407M /var/ 127M /var/cache 123M /var/lib 120M /var/cache/apt 68M /var/lib/apt/lists Archived and active journals take up 56.0M in the file system. /opt/iobroker/backups: 1.3M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 27M /opt/iobroker/iobroker-data/ 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static 13M /opt/iobroker/iobroker-data/files/admin.admin/custom 13M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 3.7M /opt/iobroker/iobroker-data/objects.jsonl 3.7M /opt/iobroker/iobroker-data/objects.json.migrated 3.7M /opt/iobroker/iobroker-data/objects.json.bak.migrated 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl No configuration change needed. Multihost discovery server: disabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0 Core adapters versions js-controller: 5.0.12 admin: 6.10.1 javascript: "javascript" not found Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBrokerMasterNeu - enabled, port: 8081, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerMasterNeu - enabled, port: 8081, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.10.1 , installed 6.10.1 Controller "js-controller": 5.0.12 , installed 5.0.12 Objects and States Please stand by - This may take a while Objects: 84 States: 64 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 99 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 23634 2193/iobroker.js-co tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 23627 2193/iobroker.js-co tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15672 575/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15692 539/cupsd tcp6 0 0 :::22 :::* LISTEN 0 15682 575/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 15691 539/cupsd tcp6 0 0 :::8081 :::* LISTEN 1001 21216 2211/io.admin.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 15092 585/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 15500 400/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16530 470/dhcpcd udp 0 0 0.0.0.0:33120 0.0.0.0:* 108 15502 400/avahi-daemon: r udp6 0 0 :::5353 :::* 108 15501 400/avahi-daemon: r udp6 0 0 :::43899 :::* 108 15503 400/avahi-daemon: r udp6 0 0 :::546 :::* 0 19342 470/dhcpcd *** Log File - Last 25 Lines *** 2023-10-04 17:23:55.859 - info: host.ioBrokerMasterNeu ip addresses: 192.168.1.57 2a02:8108:1380:68fc:67ae:2430:12be:c07d fe80::8d7:83f7:8a85:e666 2023-10-04 17:23:56.490 - info: host.ioBrokerMasterNeu connected to Objects and States 2023-10-04 17:23:56.517 - info: host.ioBrokerMasterNeu added notifications configuration of host 2023-10-04 17:23:56.934 - info: host.ioBrokerMasterNeu Delete host system.host.ioBrokerMasterNeu 2023-10-04 17:23:56.963 - info: host.ioBrokerMasterNeu Multi-host discovery server: service started on 0.0.0.0:50005 2023-10-04 17:23:57.008 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.nodeCurrent" 2023-10-04 17:23:57.015 - info: host.ioBrokerMasterNeu 1 instance found 2023-10-04 17:23:57.022 - info: host.ioBrokerMasterNeu starting 1 instance 2023-10-04 17:23:57.046 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.nodeNewest" 2023-10-04 17:23:57.067 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.nodeNewestNext" 2023-10-04 17:23:57.086 - info: host.ioBrokerMasterNeu instance system.adapter.admin.0 started with pid 2211 2023-10-04 17:23:57.138 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.npmCurrent" 2023-10-04 17:23:57.147 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.npmNewest" 2023-10-04 17:23:57.155 - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.npmNewestNext" 2023-10-04 17:23:57.164 - info: host.ioBrokerMasterNeu Some obsolete host states deleted. 2023-10-04 17:23:59.661 - info: admin.0 (2211) starting. Version 6.10.1 in /opt/iobroker/node_modules/iobroker.admin, node: v18.17.1, js-controller: 5.0.12 2023-10-04 17:23:59.720 - info: admin.0 (2211) requesting all objects 2023-10-04 17:24:00.345 - info: admin.0 (2211) received all objects 2023-10-04 17:24:00.766 - info: admin.0 (2211) socket.io server listening on port 8081 2023-10-04 17:24:00.771 - info: admin.0 (2211) http server listening on port 8081 2023-10-04 17:24:00.772 - info: admin.0 (2211) Use link "http://127.0.0.1:8081" to configure. 2023-10-04 17:24:11.859 - info: admin.0 (2211) ==> Connected system.user.admin from ::ffff:192.168.1.33 2023-10-04 17:24:30.602 - info: host.ioBrokerMasterNeu Multi-host discovery server: service started on 0.0.0.0:50005 2023-10-04 17:25:34.206 - info: admin.0 (2211) <== Disconnect system.user.admin from ::ffff:192.168.1.33 admin 2023-10-04 17:39:30.602 - info: host.ioBrokerMasterNeu Multihost discovery server stopped after 15 minutes, because only temporarily activatedNa, dann bin ich jetzt raus.
Weiß nicht wie du dies hinbekommen hast, dass der prompt nicht mehr kommt.
Wenn ich helfen konnte, dann Daumen hoch (Pfeil nach oben)!
Danke.
gute Forenbeiträge: https://forum.iobroker.net/topic/51555/hinweise-f%C3%BCr-gute-forenbeitr%C3%A4ge
ScreenToGif :https://www.screentogif.com/downloads.html -
Na, dann bin ich jetzt raus.
Weiß nicht wie du dies hinbekommen hast, dass der prompt nicht mehr kommt.@bahnuhr sagte in Hilfe bei Multihost:
Na, dann bin ich jetzt raus.
Weiß nicht wie du dies hinbekommen hast, dass der prompt nicht mehr kommt.mit dem Phänomen hat sich heute auch @splatterjoe in e7nem eigenen Thread gemeldet. Habe ihn gebeten hier weiter zu machen.
Deswegen auch die iob diag von beiden um nach Gemeinsamkeiten zu suchenkein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
409
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge