[gelöst] Hilfe bei Multihost

FredF

@pjo123456
Ist das sicher dein Master:

pi@ioBroker-Slave2

pjo123456

@fredf Das soll der 2. Slave werden aber zum Testen habe ich den jetzt erstmal neu aufgesetzt. Im Moment ist der noch stand alone. Aber wenn ich hier versuche "iobroker multihost enable" bleibt der auch so hängen wie oben beschrieben. Das komische ist ja, dass das ja mal alles ohne Probleme vor 5 Monaten bei meinem anderen beiden Raspis mit iobroker funktioniert hat. Aber wenn ich das jetzt an meinem Master probiere zeigt sich das gleiche Bild. Bleibt auch hängen. Ich habe keine Ahnung wie es weitergehen kann.

Homoran

@pjo123456 sagte in Hilfe bei Multihost:

neu aufgesetzt. Im Moment ist der noch stand alone

Auf dem Slave sollten vor der Kopplung keine Adapter installiert sein.

@pjo123456 sagte in Hilfe bei Multihost:

Ich habe keine Ahnung wie es weitergehen kann.

u.a. mit iob setup custom

@pjo123456 sagte in Hilfe bei Multihost:

Please check the binding of the configured jsonl server to allow remote connections.

ich hab noch nicht mit jsonl gearbeitet, diese Meldung kenne ich von redis.
Da muss die config angepasst werden.

Ob und wie das bei jsonl geht, weiß ich nicht

pjo123456

Also Adapter sind nur die Standardsachen drauf. Admin, Backitup und Discovery.
War sonst auch so. Habe dann einfach iobroker multihost enable am Master eingegeben und am Slave iobroker multihost Connect und fertig war die Sache. Jetzt kommt ich am Master ja schon nicht mehr mal wieder zum Prompt zurück nach iobroker multihost enable. Der steht da bis ich mit Strg+C abbreche.

Homoran

@pjo123456 sagte in Hilfe bei Multihost:

Also Adapter sind nur die Standardsachen drauf. Admin, Backitup und Discovery.

kannst du alle löschen.

@pjo123456 sagte in Hilfe bei Multihost:

Habe dann einfach iobroker multihost enable am Master eingegeben und am Slave iobroker multihost Connect und fertig war die Sache. Jetzt kommt ich am Master ja schon nicht mehr mal wieder zum Prompt zurück nach iobroker multihost enable. Der steht da bis ich mit Strg+C abbreche.

das wissen wir.
Die Doku kennst du sicherlich
https://www.iobroker.net/#de/documentation/config/multihost.md

pjo123456

@homoran Ja diese Anleitung kenne ich. Habe auch alles gemacht aber es ändert nichts. Bleibt trotzdem hängen.

Homoran

@pjo123456 sagte in Hilfe bei Multihost:

Habe auch alles gemacht

wo ist dann der output zu

@homoran sagte in Hilfe bei Multihost:

u.a. mit iob setup custom

und bitte in code-tags!
keine Screenshots von Konsolentext

wenn ich das trotzdem richtig entziffere stehen da mindestens 2 Anweisungen.
hast du diese befolgt?

pjo123456

@homoran

pi@ioBroker-Master-neu:~ $ iobroker setup custom
Current configuration:
- Objects database:
  - Type: file
  - Host/Unix Socket: 0.0.0.0
  - Port: 9001
- States database:
  - Type: file
  - Host/Unix Socket: 0.0.0.0
  - Port: 9000
- Data Directory: ../../iobroker-data/

Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [file]: j
Host / Unix Socket of objects DB(jsonl), default[127.0.0.1]: 0.0.0.0
Port of objects DB(jsonl), default[9001]:
Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [jsonl]: j
Host / Unix Socket of states DB (jsonl), default[0.0.0.0]: 0.0.0.0
Port of states DB (jsonl), default[9000]:
Data directory (file), default[../../iobroker-data/]:
Host name of this machine [ioBroker-Master-neu]:
This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y
Explicit migration from file to jsonl is not necessary, skipping...
updating conf/iobroker.json
pi@ioBroker-Master-neu:~ $ iobroker multihost enable
Please check the binding of the configured jsonl server to allow remote connections.
No configuration change needed.


Multihost discovery server: enabled
Discovery authentication:   enabled
Persistent activation:      disabled
Objects:                    jsonl on 0.0.0.0
States:                     jsonl on 0.0.0.0

Mit (j)son und (f)ile probiert. Bei beiden das gleiche Ergebnis.

pi@ioBroker-Master-neu:~ $ iobroker setup custom
Current configuration:
- Objects database:
  - Type: file
  - Host/Unix Socket: 127.0.0.1
  - Port: 9001
- States database:
  - Type: file
  - Host/Unix Socket: 127.0.0.1
  - Port: 9000
- Data Directory: ../../iobroker-data/

Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [file]: f
Host / Unix Socket of objects DB(file), default[127.0.0.1]: 0.0.0.0
Port of objects DB(file), default[9001]:
Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [file]: f
Host / Unix Socket of states DB (file), default[0.0.0.0]:
Port of states DB (file), default[9000]:
Data directory (file), default[../../iobroker-data/]:
Host name of this machine [ioBroker-Master-neu]:
updating conf/iobroker.json
pi@ioBroker-Master-neu:~ $ iobroker restart
pi@ioBroker-Master-neu:~ $ iobroker multihost enable
 Cannot read system.config: null (OK when migrating or restoring)
Please check the binding of the configured file server to allow remote connections.
No configuration change needed.


Multihost discovery server: enabled
Discovery authentication:   enabled
Persistent activation:      disabled
Objects:                    file on 0.0.0.0
States:                     file on 0.0.0.0

Homoran

@pjo123456 sagte in Hilfe bei Multihost:

Please check the binding of the configured jsonl server to allow remote connections.

@pjo123456 sagte in Hilfe bei Multihost:

Host / Unix Socket of objects DB(file), default[127.0.0.1]: 0.0.0.0

falsch! da muss der Master rein.

@pjo123456 sagte in Hilfe bei Multihost:

Host / Unix Socket of states DB (file), default[0.0.0.0]:

da auch

Blödsinn!!

wo ist der slave???

pjo123456

@homoran Ich bin erstmal auf dem Master. Wenn es da nicht weitergeht brauche ich ja noch nicht mit dem Slave anfangen.

pjo123456

So wie hier hat es bei mir immer funktioniert. Auch auf dem jetzt laufenden System. Aber eben jetzt nicht mehr.
https://www.youtube.com/watch?v=o2AT1E0FDD0&ab_channel=haus-automatisierung.com

bahnuhr

@pjo123456

Es gibt ne offizielle Anleitung. Und diese hat @Homoran dir gepostet.
Warum nimmst du diese nicht ?

Klappt einwandfrei damit.

pjo123456

@bahnuhr Bei mir aber irgendwie nicht. OK. Alles noch einmal. Ich bin erst einmal nur auf dem Master.

Ich fange noch einmal ganz von vorne an. Image und ioBroker installiert. Also den Master neu aufgesetzt. Alles jungfräulich. Adapter sind nur Admin, Backitup und Discovery installiert, keine anderen zusätzlich installiert. Backitup und Discovery habe ich deinstalliert.

Hier die Ausgabe falls es interessiert:

login as: pi
pi@192.168.1.57's password:
Linux ioBrokerMasterNeu 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr  3 17:24:16 BST 2023 aarch64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed May  3 02:36:53 2023
pi@ioBrokerMasterNeu:~ $ curl -sLf https://iobroker.net/install.sh | bash -
library: loaded
Library version=2022-12-09

==========================================================================

   Welcome to the ioBroker installer!
   Installer version: 2023-09-13

   You might need to enter your password a couple of times.

==========================================================================


==========================================================================
   Installing prerequisites (1/4)
==========================================================================

Get:1 http://archive.raspberrypi.org/debian bullseye InRelease [23.6 kB]
Get:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease [15.0 kB]
Get:3 http://archive.raspberrypi.org/debian bullseye/main armhf Packages [314 kB]
Get:4 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages [13.2 MB]
Fetched 13.6 MB in 1min 25s (160 kB/s)
Reading package lists... Done
N: Repository 'http://raspbian.raspberrypi.org/raspbian bullseye InRelease' changed its 'Suite' value from 'stable' to 'oldstable'

==========================================================================

   Node.js not found. Installing...

==========================================================================


================================================================================
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
================================================================================

                          SCRIPT DEPRECATION WARNING


 This script, located at https://deb.nodesource.com/setup_X, used to
 install Node.js is deprecated now and will eventually be made inactive.

 Please visit the NodeSource distributions Github and follow the
 instructions to migrate your repo.
 https://github.com/nodesource/distributions

 The NodeSource Node.js Linux distributions GitHub repository contains
 information about which versions of Node.js and which Linux distributions
 are supported and how to install it.
 https://github.com/nodesource/distributions


                         SCRIPT DEPRECATION WARNING

================================================================================
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
================================================================================

TO AVOID THIS WAIT MIGRATE THE SCRIPT
Continuing in 60 seconds (press Ctrl-C to abort) ...


## Installing the NodeSource Node.js 18.x repo...


## Populating apt-get cache...

+ apt-get update
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Reading package lists... Done

## Confirming "bullseye" is supported...

+ curl -sLf -o /dev/null 'https://deb.nodesource.com/node_18.x/dists/bullseye/Release'

## Adding the NodeSource signing key to your keyring...

+ curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | gpg --dearmor | tee /usr/share/keyrings/nodesource.gpg >/dev/null

## Creating apt sources list file for the NodeSource Node.js 18.x repo...

+ echo 'deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x bullseye main' > /etc/apt/sources.list.d/nodesource.list
+ echo 'deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x bullseye main' >> /etc/apt/sources.list.d/nodesource.list

## Running `apt-get update` for you...

+ apt-get update
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Get:3 https://deb.nodesource.com/node_18.x bullseye InRelease [4,586 B]
Get:4 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages [787 B]
Fetched 5,373 B in 1s (5,543 B/s)
Reading package lists... Done

## Run `sudo apt-get install -y nodejs` to install Node.js 18.x and npm
## You may also need development tools to build native addons:
    sudo apt-get install gcc g++ make
## To install the Yarn package manager, run:
    curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | gpg --dearmor | sudo tee /usr/share/keyrings/yarnkey.gpg >/dev/null
    echo "deb [signed-by=/usr/share/keyrings/yarnkey.gpg] https://dl.yarnpkg.com/debian stable main" | sudo tee /etc/apt/sources.list.d/yarn.list
    sudo apt-get update && sudo apt-get install yarn


Installed nodejs
Node.js Installed successfully!
Changing npm registry to https://registry.npmjs.org
Installed gcc-c++
Installed libavahi-compat-libdnssd-dev
Installed libudev-dev
Installed libpam0g-dev
Installed libcairo2-dev
Installed libpango1.0-dev
Installed libjpeg-dev
Installed libgif-dev
Installed librsvg2-dev
Installed cmake

==========================================================================
   Creating ioBroker user and directory (2/4)
==========================================================================

User iobroker created
Created /etc/sudoers.d/iobroker
Directory /opt/iobroker created

==========================================================================
   Installing ioBroker (3/4)
==========================================================================


==========================================================================
   Finalizing installation (4/4)
==========================================================================

Enabling autostart...
Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → /lib/systemd/system/iobroker.service.
Autostart enabled!
Fixing directory permissions...

==========================================================================

   ioBroker was installed successfully
   Open http://192.168.1.57:8081 in a browser and start configuring!

==========================================================================


You need to re-login before doing anything else on the console!

pi@ioBrokerMasterNeu:~ $

Inder Anleitung steht: Auf dem Master folgendes Kommando ausführen:

Dieser Schritt ist unbedingt nötig, falls Redis DB im Einsatz ist. In anderen Fällen kann man Ihn nutzen, wenn die automatische Methode (s.u.) fehlschlägt. Dann aber bitte f(ile) statt r(edis) auswählen! Heißt für mich also bei:
Typ of objects DB: f
und bei
Typ of states DB: f

Richtig?

Weiter gehts mit iobroker setup custom

login as: pi
pi@192.168.1.57's password:
Linux ioBrokerMasterNeu 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr  3 17:24:16 BST 2023 aarch64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Oct  4 16:26:13 2023 from 192.168.1.33
pi@ioBrokerMasterNeu:~ $ iobroker setup custom
Current configuration:
- Objects database:
  - Type: jsonl
  - Host/Unix Socket: 0.0.0.0
  - Port: 9001
- States database:
  - Type: jsonl
  - Host/Unix Socket: 0.0.0.0
  - Port: 9000
- Data Directory: ../../iobroker-data/

Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [jsonl]: f
Host / Unix Socket of objects DB(file), default[127.0.0.1]: 0.0.0.0
Port of objects DB(file), default[9001]:
Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [file]: f
Host / Unix Socket of states DB (file), default[0.0.0.0]:
Port of states DB (file), default[9000]:
Data directory (file), default[../../iobroker-data/]:
Host name of this machine [ioBrokerMasterNeu]:
This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y

Do you want to migrate objects and states from "jsonl/jsonl" to "file/file" [y/N]: y

Migrating the objects database will overwrite all objects! Are you sure that this is not a slave host and you want to migrate the data? [y/N]: y

Connecting to previous DB "jsonl/jsonl"...

Cannot migrate DB while js-controller is still running!
Please stop ioBroker and try again. No settings have been changed.
pi@ioBrokerMasterNeu:~ $ iobroker stop
pi@ioBrokerMasterNeu:~ $ iobroker setup custom
Current configuration:
- Objects database:
  - Type: jsonl
  - Host/Unix Socket: 0.0.0.0
  - Port: 9001
- States database:
  - Type: jsonl
  - Host/Unix Socket: 0.0.0.0
  - Port: 9000
- Data Directory: ../../iobroker-data/

Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [jsonl]: f
Host / Unix Socket of objects DB(file), default[127.0.0.1]: 0.0.0.0
Port of objects DB(file), default[9001]:
Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [file]: f
Host / Unix Socket of states DB (file), default[0.0.0.0]:
Port of states DB (file), default[9000]:
Data directory (file), default[../../iobroker-data/]:
Host name of this machine [ioBrokerMasterNeu]:
This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y

Do you want to migrate objects and states from "jsonl/jsonl" to "file/file" [y/N]: y

Migrating the objects database will overwrite all objects! Are you sure that this is not a slave host and you want to migrate the data? [y/N]: y

Connecting to previous DB "jsonl/jsonl"...
Creating backup ...
This can take some time ... please be patient!
host.ioBrokerMasterNeu 62 states saved
host.ioBrokerMasterNeu 85 objects saved
Backup created: /opt/iobroker/backups/2023_10_04-16_32_04_backupiobroker-migration.tar.gz
updating conf/iobroker.json

Connecting to new DB "file/file" (can take up to 20s) ...
Server Cannot load /opt/iobroker/iobroker-data/objects.json: Database file /opt/iobroker/iobroker-data/objects.json does not exists.. We try last Backup!
Server Cannot load /opt/iobroker/iobroker-data/states.json: Database file /opt/iobroker/iobroker-data/states.json does not exists.. We try last Backup!
Server Cannot load /opt/iobroker/iobroker-data/objects.json.bak: Database file /opt/iobroker/iobroker-data/objects.json.bak does not exists.. Continue with empty dataset!
Server If this is no Migration or initial start please restore the last backup from /opt/iobroker/iobroker-data/backup-objects
Server Cannot load /opt/iobroker/iobroker-data/states.json.bak: Database file /opt/iobroker/iobroker-data/states.json.bak does not exists.. Continue with empty dataset!
Server If this is no Migration or initial start please restore the last backup from /opt/iobroker/iobroker-data/backup-objects
 Cannot read system.config: null (OK when migrating or restoring)
Restore backup ...
This can take some time ... please be patient!
iobroker controller daemon is not running
host.ioBrokerMasterNeu OK.
host.ioBrokerMasterNeu Clear all objects and states...
clean 2 objects...
clean 2 states...
host.ioBrokerMasterNeu done.
host.ioBrokerMasterNeu Processed 0/85 objects
85 objects restored.
host.ioBrokerMasterNeu Processed 0/62 states
62 states restored.
upload [52] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/admin.png admin.png image/png
upload [50] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/customComponents.js.map custom/customComponents.js.map application/json
upload [40] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/i18n/zh-cn.json custom/i18n/zh-cn.json application/json
upload [30] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/node_modules_prop-types_index_js.512eddf9.chunk.js.map custom/static/js/node_modules_prop-types_index_js.512eddf9.chunk.js.map application/json
upload [20] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map application/json
upload [19] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js application/javascript
upload [18] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map application/json
upload [17] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_styles_index_js-node_modules_mui_utils_esm_capitalize_js-node_module-19fe07.82575832.chunk.js custom/static/js/vendors-node_modules_mui_styles_index_js-node_modules_mui_utils_esm_capitalize_js-node_module-19fe07.82575832.chunk.js application/javascript
upload [16] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_styles_index_js-node_modules_mui_utils_esm_capitalize_js-node_module-19fe07.82575832.chunk.js.map custom/static/js/vendors-node_modules_mui_styles_index_js-node_modules_mui_utils_esm_capitalize_js-node_module-19fe07.82575832.chunk.js.map application/json
upload [15] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_styles_withStyles_withStyles_js.6d998ff2.chunk.js custom/static/js/vendors-node_modules_mui_styles_withStyles_withStyles_js.6d998ff2.chunk.js application/javascript
upload [14] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_mui_styles_withStyles_withStyles_js.6d998ff2.chunk.js.map custom/static/js/vendors-node_modules_mui_styles_withStyles_withStyles_js.6d998ff2.chunk.js.map application/json
upload [13] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dom_index_js.51544235.chunk.js custom/static/js/vendors-node_modules_react-dom_index_js.51544235.chunk.js application/javascript
upload [12] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/custom/static/js/vendors-node_modules_react-dom_index_js.51544235.chunk.js.map custom/static/js/vendors-node_modules_react-dom_index_js.51544235.chunk.js.map application/json
upload [11] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/de/translations.json i18n/de/translations.json application/json
upload [10] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/en/translations.json i18n/en/translations.json application/json
upload [9] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/es/translations.json i18n/es/translations.json application/json
upload [8] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/fr/translations.json i18n/fr/translations.json application/json
upload [7] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/it/translations.json i18n/it/translations.json application/json
upload [6] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/nl/translations.json i18n/nl/translations.json application/json
upload [5] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/pl/translations.json i18n/pl/translations.json application/json
upload [4] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/pt/translations.json i18n/pt/translations.json application/json
upload [3] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/ru/translations.json i18n/ru/translations.json application/json
upload [2] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/uk/translations.json i18n/uk/translations.json application/json
upload [1] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json
upload [0] admin.admin /opt/iobroker/node_modules/iobroker.admin/admin/jsonConfig.json5 jsonConfig.json5 application/json5
Reinstalling adapter "admin" from "iobroker.admin@6.10.1"

up to date in 4s

22 packages are looking for funding
  run `npm fund` for details
Successfully migrated 84 objects to Redis Sets
Backup restored - Migration successful

Important: If your system consists of multiple hosts please execute
"iobroker upload all" on the master AFTER all other hosts/slaves have
also been updated to this states/objects database configuration AND are
running!
pi@ioBrokerMasterNeu:~ $ iobroker multihost enable
Please check the binding of the configured file server to allow remote connections.
No configuration change needed.


Multihost discovery server: enabled
Discovery authentication:   enabled
Persistent activation:      disabled
Objects:                    file on 0.0.0.0
States:                     file on 0.0.0.0

Jetzt soll ich ja iobroker restart eingeben. Aber wie? Kein Prompt! Das ist mein Problem wo ich nicht weiterkomme. Bin für alle Vorschläge/Ratschläge offen.

Homoran

@pjo123456 sagte in Hilfe bei Multihost:

Richtig?

nein!
kannst du zwar machen, sollte auch gehen.
Der Knackpunkt ist, dass es jetzt noch zusätzlich jsonl gibt, das in neueren Installationen Standard anstelle von file ist.

pjo123456

@homoran OK, also json nutzen. Hatte ich auch probiert aber mache ich gerne noch einmal.

Dann sieht es so aus:


pi@ioBrokerMasterNeu:~ $ iobroker setup custom
Current configuration:
- Objects database:
  - Type: file
  - Host/Unix Socket: 0.0.0.0
  - Port: 9001
- States database:
  - Type: file
  - Host/Unix Socket: 0.0.0.0
  - Port: 9000
- Data Directory: ../../iobroker-data/

Type of objects DB [(j)sonl, (f)ile, (r)edis, ...], default [file]: j
Host / Unix Socket of objects DB(jsonl), default[127.0.0.1]: 0.0.0.0
Port of objects DB(jsonl), default[9001]:
Type of states DB [(j)sonl, (f)file, (r)edis, ...], default [jsonl]: j
Host / Unix Socket of states DB (jsonl), default[0.0.0.0]:
Port of states DB (jsonl), default[9000]:
Data directory (file), default[../../iobroker-data/]:
Host name of this machine [ioBrokerMasterNeu]:
This host appears to be a Master or a Single host system. Is this correct? [Y/n]: y
Explicit migration from file to jsonl is not necessary, skipping...
updating conf/iobroker.json
pi@ioBrokerMasterNeu:~ $ iobroker multihost enable
Please check the binding of the configured jsonl server to allow remote connections.
No configuration change needed.


Multihost discovery server: enabled
Discovery authentication:   enabled
Persistent activation:      disabled
Objects:                    jsonl on 0.0.0.0
States:                     jsonl on 0.0.0.0

keine Änderung am Problem.

Homoran

@pjo123456 sagte in Hilfe bei Multihost:

keine Änderung am Problem.

bitte iob diag in der Langfassung!

@splatterjoe
von dir bitte auch

bahnuhr

@pjo123456
so, du zeigst den 1. Teil auf dem Master. Dieser sieht doch ok aus.

Und jetzt zeigst du uns den 2. Teil; der auf dem Slave.

Nachtrag:
Ich bin immer nach dieser Anleitung (war die alte Doku von iob) vorgegangen.
Entspricht der neuen Doku (fast).

Iobroker multihost einrichten_2.pdf

pjo123456

@bahnuhr eben nicht. Normalerweise müsste sich nach iobroker multihost enable das Terminal wieder mit dem Prompt melden. Macht es aber nicht. Ich kann ab diesem Punkt außer abbrechen nichts mehr machen. Das war sonst nicht so.

@Homoran


======== Start marking the full check here =========


Skript v.2023-06-20

*** BASE SYSTEM ***
   Static hostname: ioBrokerMasterNeu
         Icon name: computer
        Machine ID: 4236e4b937704469b720130c5fb87437
           Boot ID: 0658e2b6522445589c9030e8daf81d71
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : armhf

Systemuptime and Load:
 18:00:50 up  1:34,  3 users,  load average: 0.03, 0.13, 0.06
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=44.3'C
volt=0.9260V

*** Time and Time Zones ***
               Local time: Wed 2023-10-04 18:00:50 CEST
           Universal time: Wed 2023-10-04 16:00:50 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       true
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        297M        6.9G         35M        597M        7.4G
Swap:            99M          0B         99M
Total:          7.9G        297M        7.0G

         7812 M total memory
          298 M used memory
          442 M active memory
          292 M inactive memory
         6916 M free memory
           43 M buffer memory
          554 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       15G  3.9G  9.9G  29% /
devtmpfs       devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  1.2M  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   51M  205M  20% /boot
tmpfs          tmpfs     782M   24K  782M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Oct  4 16:26:00 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:5D:E5:15 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=29c5ba51-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Wed Oct  4 16:26:01 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Oct  4 16:26:01 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Oct  4 16:26:04 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
407M    /var/
127M    /var/cache
123M    /var/lib
120M    /var/cache/apt
68M     /var/lib/apt/lists

Archived and active journals take up 56.0M in the file system.

/opt/iobroker/backups:
1.3M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
27M     /opt/iobroker/iobroker-data/
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom/static
13M     /opt/iobroker/iobroker-data/files/admin.admin/custom
13M     /opt/iobroker/iobroker-data/files/admin.admin

The five largest files in iobroker-data are:
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
3.7M    /opt/iobroker/iobroker-data/objects.jsonl
3.7M    /opt/iobroker/iobroker-data/objects.json.migrated
3.7M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
2.8M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.17.1
/usr/bin/node           v18.17.1
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7


nodejs:
  Installed: 18.17.1-deb-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree: 0

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

No configuration change needed.


Multihost discovery server: disabled
Discovery authentication:   enabled
Persistent activation:      disabled
Objects:                    jsonl on 0.0.0.0
States:                     jsonl on 0.0.0.0

Core adapters versions
js-controller:  5.0.12
admin:          6.10.1
javascript:     "javascript" not found

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : ioBrokerMasterNeu                        -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : ioBrokerMasterNeu                        -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.10.1   , installed 6.10.1
Controller "js-controller": 5.0.12   , installed 5.0.12

Objects and States
Please stand by - This may take a while
Objects:        84
States:         64

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 99

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       23634      2193/iobroker.js-co
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       23627      2193/iobroker.js-co
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          15672      575/sshd: /usr/sbin
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          15692      539/cupsd
tcp6       0      0 :::22                   :::*                    LISTEN      0          15682      575/sshd: /usr/sbin
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          15691      539/cupsd
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       21216      2211/io.admin.0
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          15092      585/cups-browsed
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        15500      400/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          16530      470/dhcpcd
udp        0      0 0.0.0.0:33120           0.0.0.0:*                           108        15502      400/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        15501      400/avahi-daemon: r
udp6       0      0 :::43899                :::*                                108        15503      400/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          19342      470/dhcpcd

*** Log File - Last 25 Lines ***

2023-10-04 17:23:55.859  - info: host.ioBrokerMasterNeu ip addresses: 192.168.1.57 2a02:8108:1380:68fc:67ae:2430:12be:c07d fe80::8d7:83f7:8a85:e666
2023-10-04 17:23:56.490  - info: host.ioBrokerMasterNeu connected to Objects and States
2023-10-04 17:23:56.517  - info: host.ioBrokerMasterNeu added notifications configuration of host
2023-10-04 17:23:56.934  - info: host.ioBrokerMasterNeu Delete host system.host.ioBrokerMasterNeu
2023-10-04 17:23:56.963  - info: host.ioBrokerMasterNeu Multi-host discovery server: service started on 0.0.0.0:50005
2023-10-04 17:23:57.008  - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.nodeCurrent"
2023-10-04 17:23:57.015  - info: host.ioBrokerMasterNeu 1 instance found
2023-10-04 17:23:57.022  - info: host.ioBrokerMasterNeu starting 1 instance
2023-10-04 17:23:57.046  - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.nodeNewest"
2023-10-04 17:23:57.067  - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.nodeNewestNext"
2023-10-04 17:23:57.086  - info: host.ioBrokerMasterNeu instance system.adapter.admin.0 started with pid 2211
2023-10-04 17:23:57.138  - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.npmCurrent"
2023-10-04 17:23:57.147  - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.npmNewest"
2023-10-04 17:23:57.155  - info: host.ioBrokerMasterNeu Delete state "system.host.ioBrokerMasterNeu.versions.npmNewestNext"
2023-10-04 17:23:57.164  - info: host.ioBrokerMasterNeu Some obsolete host states deleted.
2023-10-04 17:23:59.661  - info: admin.0 (2211) starting. Version 6.10.1 in /opt/iobroker/node_modules/iobroker.admin, node: v18.17.1, js-controller: 5.0.12
2023-10-04 17:23:59.720  - info: admin.0 (2211) requesting all objects
2023-10-04 17:24:00.345  - info: admin.0 (2211) received all objects
2023-10-04 17:24:00.766  - info: admin.0 (2211) socket.io server listening on port 8081
2023-10-04 17:24:00.771  - info: admin.0 (2211) http server listening on port 8081
2023-10-04 17:24:00.772  - info: admin.0 (2211) Use link "http://127.0.0.1:8081" to configure.
2023-10-04 17:24:11.859  - info: admin.0 (2211) ==> Connected system.user.admin from ::ffff:192.168.1.33
2023-10-04 17:24:30.602  - info: host.ioBrokerMasterNeu Multi-host discovery server: service started on 0.0.0.0:50005
2023-10-04 17:25:34.206  - info: admin.0 (2211) <== Disconnect system.user.admin from ::ffff:192.168.1.33 admin
2023-10-04 17:39:30.602  - info: host.ioBrokerMasterNeu Multihost discovery server stopped after 15 minutes, because only temporarily activated

Thomas Braun

@pjo123456 sagte in Hilfe bei Multihost:

Pending Updates: 99

Und schalt den Desktop aus.

pjo123456

@thomas-braun OK, mache ich. Aber ich denek jetzt fast, dass das Problem woanders liegt. Denn auf meinem laufenden System sieht es genau so aus:

Edit: Habe die Updates gemacht und Desktop ausgeschaltet. Keine Änderung.

NEWS

[gelöst] Hilfe bei Multihost

Support us

386

32.4k

81.4k

1.3m