- ioBroker Community Home
- Deutsch
- ioBroker Allgemein
- js-controller 5.0.x jetzt für alle User im STABLE!
NEWS
js-controller 5.0.x jetzt für alle User im STABLE!
Geplant
Angeheftet
Gesperrt
Verschoben
ioBroker Allgemein
509
Beiträge
82
Kommentatoren
139.8k
Aufrufe
65
Watching
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
-
@ofbeqnpolkkl6mby5e13 hm magst du mal innerhalb der 18er Range upgraden um auszuschließen dass es daran liegt - ich vermute wenn nach Vorgaben installiert sollte ein
sudo apt update && sudo apt upgradezur Aktualisierung ausrecihen. Ansonsten bliebe noch das ich probiere es mit deinem Backup nachzustellen, aber aktuell fehlt mir leider jeder Anhaltspunkt. -
@ofbeqnpolkkl6mby5e13 aktuelle LTS wäre 18.18.0
ansonsten wie gesagt, ich kann probieren es mit deinem System nachzustellen, wenn du mir ein Backup zukommen lässt und rein debuggen. Ansonsten keine Idee und wie gesagt eher selten und bei anderen lag es meist an den übergebliebenen Binary States.
Hier könnt ihr mich unterstützen.
-
@ofbeqnpolkkl6mby5e13 aktuelle LTS wäre 18.18.0
ansonsten wie gesagt, ich kann probieren es mit deinem System nachzustellen, wenn du mir ein Backup zukommen lässt und rein debuggen. Ansonsten keine Idee und wie gesagt eher selten und bei anderen lag es meist an den übergebliebenen Binary States.
Ich bringe mein System erst mal auf Stand.
Bin jetzt auf:
Node.js: v18.17.1
NPM: 9.6.7und beobachte.
-
Scheint im MQTT-Adapter selbst auch nicht komplett abgefangen zu werden:
2023-09-15 00:37:44.321 - [31merror[39m: mqtt.0 (456) Client [DVES_990210] Cannot parse "stat/tasmota_990210/STATUS11": {"StatusSTS":{"Time":"2023-09-14T23:37:34","Uptime":"100T16:49:22","UptimeSec":8700562,"Heap":19,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":24,"POWER":"OFF","Wifi":{"AP":1,"SSId":"***","BSSId":"***","Channel":1,"Mode":"11n","RSSI":62,"Signal":-69,"LinkCount":8,"Downtime":"0T00� stat/t@ofbeqnpolkkl6mby5e13 sagte in js-controller 5.0.x jetzt für alle User im STABLE!:
Scheint im MQTT-Adapter selbst auch nicht komplett abgefangen zu werden:
2023-09-15 00:37:44.321 - [31merror[39m: mqtt.0 (456) Client [DVES_990210] Cannot parse "stat/tasmota_990210/STATUS11": {"StatusSTS":{"Time":"2023-09-14T23:37:34","Uptime":"100T16:49:22","UptimeSec":8700562,"Heap":19,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":24,"POWER":"OFF","Wifi":{"AP":1,"SSId":"***","BSSId":"***","Channel":1,"Mode":"11n","RSSI":62,"Signal":-69,"LinkCount":8,"Downtime":"0T00� stat/tUm auch noch mal auf dieses Thema zurückzukommen. Ich erhalte für nahezu jedes Tasmota-Gerät eine solche Meldung beim Subscribe.
-
@ofbeqnpolkkl6mby5e13 sagte in js-controller 5.0.x jetzt für alle User im STABLE!:
Scheint im MQTT-Adapter selbst auch nicht komplett abgefangen zu werden:
2023-09-15 00:37:44.321 - [31merror[39m: mqtt.0 (456) Client [DVES_990210] Cannot parse "stat/tasmota_990210/STATUS11": {"StatusSTS":{"Time":"2023-09-14T23:37:34","Uptime":"100T16:49:22","UptimeSec":8700562,"Heap":19,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":24,"POWER":"OFF","Wifi":{"AP":1,"SSId":"***","BSSId":"***","Channel":1,"Mode":"11n","RSSI":62,"Signal":-69,"LinkCount":8,"Downtime":"0T00� stat/tUm auch noch mal auf dieses Thema zurückzukommen. Ich erhalte für nahezu jedes Tasmota-Gerät eine solche Meldung beim Subscribe.
@ofbeqnpolkkl6mby5e13 Hm was hat das mit Controller zu tun? Er möchte die Message als JSON parsen, aber es scheint kein vollständiges JSON zu sein. Da hat Controller nix mit zu tun
https://github.com/ioBroker/ioBroker.mqtt/blob/4491114d4819ce65d2baf68f063d3eb169390d0d/lib/common.js#L179Hier könnt ihr mich unterstützen.
-
@ofbeqnpolkkl6mby5e13 Hm was hat das mit Controller zu tun? Er möchte die Message als JSON parsen, aber es scheint kein vollständiges JSON zu sein. Da hat Controller nix mit zu tun
https://github.com/ioBroker/ioBroker.mqtt/blob/4491114d4819ce65d2baf68f063d3eb169390d0d/lib/common.js#L179Tritt erst seit JS-Controller 5 auf. So wie auch der Fehler mit dem MQTT-Client.
-
Tritt erst seit JS-Controller 5 auf. So wie auch der Fehler mit dem MQTT-Client.
-
@ofbeqnpolkkl6mby5e13 was ist der Fehler mit dem MQTT client?
-
@ofbeqnpolkkl6mby5e13 das kommt durch Controller v5 - ja.
Aber bei der JSON parse Geschichte sollte das absolut keinen Einfluss haben.
Hier könnt ihr mich unterstützen.
-
@ofbeqnpolkkl6mby5e13 das kommt durch Controller v5 - ja.
Aber bei der JSON parse Geschichte sollte das absolut keinen Einfluss haben.
Okay.
-
also - bei mir lief die Installation nach obiger Anleitung völlig fehlerfrei durch. Es funktioniert im Prinzip auch alles wie vorher - nur kann ich Adapter nicht updaten/instllieren, die den js-controller 5.x voraussetzen - es wird seitens ioBroker gemeckert, dass noch die Version 4.0.24 installiert sei ??
Wenn ich mir die Ausgabe von iob diag ansehe, dann sieht (für mich) auch alles fehlerfrei aus und dort wird auch die js-controller version 5.0.12 reportet. ?? RPi4 wurde bereits mehrfach neu gebootet.
======== Start marking the full check here =========Skript v.2023-06-20 *** BASE SYSTEM *** Static hostname: ioBroker-Pi4 Icon name: computer Machine ID: db4e6210948f4c2fbbfcc8b99fdb2210 Boot ID: a3037da1fe234331bbb0cb1822274c48 Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 6.1.10-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 12:16:17 up 16 min, 2 users, load average: 3.80, 2.03, 1.43 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=51.6'C volt=0.8500V *** Time and Time Zones *** Local time: Thu 2023-09-28 12:16:17 CEST Universal time: Thu 2023-09-28 10:16:17 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 1.4G 5.9G 9.0M 550M 6.2G Swap: 99M 0B 99M Total: 8.0G 1.4G 6.0G 7897 M total memory 1449 M used memory 1576 M active memory 180 M inactive memory 5897 M free memory 86 M buffer memory 464 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 110G 28G 79G 26% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 3.9G 9.5M 3.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sda1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 790M 0 790M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Sep 28 11:59:22 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:EE:B3:A8 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 root=PARTUUID=ffb03b60-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu Sep 28 11:59:24 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Thu Sep 28 11:59:24 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Thu Sep 28 11:59:27 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 329M /var/ 128M /var/lib 93M /var/cache 78M /var/cache/apt 69M /var/lib/apt/lists Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 4.1G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 16G /opt/iobroker/iobroker-data/history 16G /opt/iobroker/iobroker-data/ 389M /opt/iobroker/iobroker-data/files 234M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/objects.json.migrated 24M /opt/iobroker/iobroker-data/objects.json.bak.migrated 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 0 *** ioBroker-Installation *** ioBroker Status Cannot load "custom": Connection is closed. Cannot initialize database scripts: Cannot load "custom" into objects database: Connection is closed. Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"! No configuration change needed. Multihost discovery server: disabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0 Core adapters versions js-controller: 5.0.12 admin: 6.10.4 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : ioBroker-Pi4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : ioBroker-Pi4 - enabled + system.adapter.backitup.0 : backitup : ioBroker-Pi4 - enabled system.adapter.bring.0 : bring : ioBroker-Pi4 - disabled system.adapter.chromecast.0 : chromecast : ioBroker-Pi4 - disabled system.adapter.daswetter.0 : daswetter : ioBroker-Pi4 - enabled system.adapter.denon.0 : denon : ioBroker-Pi4 - disabled + system.adapter.device-reminder.0 : device-reminder : ioBroker-Pi4 - enabled system.adapter.devices.0 : devices : ioBroker-Pi4 - disabled + system.adapter.discovery.0 : discovery : ioBroker-Pi4 - enabled system.adapter.emby.0 : emby : ioBroker-Pi4 - disabled system.adapter.ems-esp.0 : ems-esp : ioBroker-Pi4 - disabled system.adapter.feiertage.0 : feiertage : ioBroker-Pi4 - disabled system.adapter.flot.0 : flot : ioBroker-Pi4 - disabled system.adapter.fritzdect.0 : fritzdect : ioBroker-Pi4 - disabled system.adapter.go-e.0 : go-e : ioBroker-Pi4 - disabled system.adapter.harmony.0 : harmony : ioBroker-Pi4 - disabled + system.adapter.heatingcontrol.0 : heatingcontrol : ioBroker-Pi4 - enabled + system.adapter.history.0 : history : ioBroker-Pi4 - enabled + system.adapter.hm-rega.0 : hm-rega : ioBroker-Pi4 - enabled + system.adapter.hm-rpc.0 : hm-rpc : ioBroker-Pi4 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBroker-Pi4 - enabled, port: 0 system.adapter.hs100.0 : hs100 : ioBroker-Pi4 - disabled system.adapter.ical.0 : ical : ioBroker-Pi4 - enabled system.adapter.icons-icons8.0 : icons-icons8 : ioBroker-Pi4 - disabled system.adapter.icons-material-png.0 : icons-material-png : ioBroker-Pi4 - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ioBroker-Pi4 - disabled system.adapter.info.0 : info : ioBroker-Pi4 - enabled + system.adapter.iot.0 : iot : ioBroker-Pi4 - enabled system.adapter.iqontrol.0 : iqontrol : ioBroker-Pi4 - disabled + system.adapter.javascript.0 : javascript : ioBroker-Pi4 - enabled system.adapter.kodi.0 : kodi : ioBroker-Pi4 - disabled, port: 9090 + system.adapter.lgtv.0 : lgtv : ioBroker-Pi4 - enabled system.adapter.lgtv.1 : lgtv : ioBroker-Pi4 - enabled system.adapter.mercedesme.0 : mercedesme : ioBroker-Pi4 - disabled system.adapter.meross.0 : meross : ioBroker-Pi4 - disabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker-Pi4 - enabled, port: 54321 system.adapter.mobile.0 : mobile : ioBroker-Pi4 - disabled system.adapter.net-tools.0 : net-tools : ioBroker-Pi4 - disabled + system.adapter.onkyo.0 : onkyo : ioBroker-Pi4 - enabled system.adapter.onvif.0 : onvif : ioBroker-Pi4 - disabled + system.adapter.openweathermap.0 : openweathermap : ioBroker-Pi4 - enabled system.adapter.ping.0 : ping : ioBroker-Pi4 - disabled + system.adapter.pushover.0 : pushover : ioBroker-Pi4 - enabled system.adapter.radar2.0 : radar2 : ioBroker-Pi4 - disabled system.adapter.robonect.0 : robonect : ioBroker-Pi4 - disabled + system.adapter.scenes.0 : scenes : ioBroker-Pi4 - enabled + system.adapter.shelly.0 : shelly : ioBroker-Pi4 - enabled, port: 1899, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : ioBroker-Pi4 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.smartgarden.0 : smartgarden : ioBroker-Pi4 - enabled + system.adapter.solax.0 : solax : ioBroker-Pi4 - enabled + system.adapter.sonoff.0 : sonoff : ioBroker-Pi4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : ioBroker-Pi4 - enabled + system.adapter.sourceanalytix.1 : sourceanalytix : ioBroker-Pi4 - enabled system.adapter.telegram.0 : telegram : ioBroker-Pi4 - disabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : ioBroker-Pi4 - enabled + system.adapter.tr-064.0 : tr-064 : ioBroker-Pi4 - enabled system.adapter.tr-064.1 : tr-064 : ioBroker-Pi4 - disabled system.adapter.tr-064.2 : tr-064 : ioBroker-Pi4 - disabled system.adapter.tuya.0 : tuya : ioBroker-Pi4 - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : ioBroker-Pi4 - disabled system.adapter.vis-google-fonts.0 : vis-google-fonts : ioBroker-Pi4 - disabled system.adapter.vis-history.0 : vis-history : ioBroker-Pi4 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBroker-Pi4 - disabled system.adapter.vis-inventwo.0 : vis-inventwo : ioBroker-Pi4 - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker-Pi4 - disabled system.adapter.vis-justgage.0 : vis-justgage : ioBroker-Pi4 - disabled system.adapter.vis-keyboard.0 : vis-keyboard : ioBroker-Pi4 - disabled system.adapter.vis-lcars.0 : vis-lcars : ioBroker-Pi4 - disabled system.adapter.vis-map.0 : vis-map : ioBroker-Pi4 - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : ioBroker-Pi4 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBroker-Pi4 - disabled system.adapter.vis-weather.0 : vis-weather : ioBroker-Pi4 - disabled system.adapter.vis.0 : vis : ioBroker-Pi4 - enabled + system.adapter.vw-connect.0 : vw-connect : ioBroker-Pi4 - enabled + system.adapter.web.0 : web : ioBroker-Pi4 - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : ioBroker-Pi4 - disabled system.adapter.whatsapp-cmb.1 : whatsapp-cmb : ioBroker-Pi4 - disabled + system.adapter.wled.0 : wled : ioBroker-Pi4 - enabled + system.adapter.zigbee.0 : zigbee : ioBroker-Pi4 - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBroker-Pi4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : ioBroker-Pi4 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBroker-Pi4 - enabled, port: 0 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker-Pi4 - enabled, port: 54321 + system.adapter.shelly.0 : shelly : ioBroker-Pi4 - enabled, port: 1899, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : ioBroker-Pi4 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : ioBroker-Pi4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBroker-Pi4 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : ioBroker-Pi4 - enabled, port: /dev/ttyUSB0 ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Beta (latest) Installed ioBroker-Instances Used repository: Beta (latest) Adapter "admin" : 6.10.4 , installed 6.10.4 Adapter "alexa2" : 3.25.2 , installed 3.24.1 [Updatable] Adapter "backitup" : 2.8.1 , installed 2.6.23 [Updatable] Adapter "bring" : 1.8.4 , installed 1.8.1 [Updatable] Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "denon" : 1.15.4 , installed 1.15.4 Adapter "device-reminder": 2.0.1 , installed 1.2.9 [Updatable] Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.1.0 , installed 3.1.0 [Updatable] Adapter "emby" : 1.0.2 , installed 1.0.2 Adapter "ems-esp" : 2.4.1 , installed 2.2.0 [Updatable] Adapter "feiertage" : 1.1.4 , installed 1.1.0 [Updatable] Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.4.1 , installed 2.3.1 [Updatable] Adapter "go-e" : 1.0.27 , installed 1.0.27 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "heatingcontrol": 2.11.1 , installed 2.11.1 Adapter "history" : 3.0.0 , installed 2.2.6 [Updatable] Adapter "hm-rega" : 4.0.0 , installed 3.0.47 [Updatable] Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "hs100" : 2.1.2 , installed 2.1.2 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "info" : 2.0.0 , installed 1.9.26 [Updatable] Adapter "iot" : 2.0.11 , installed 1.14.5 [Updatable] Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "kodi" : 3.0.0 , installed 2.0.9 [Updatable] Adapter "lgtv" : 1.1.12 , installed 1.1.12 Adapter "mercedesme" : 0.1.3 , installed 0.1.3 Adapter "meross" : 1.15.1 , installed 1.15.1 Adapter "mihome-vacuum": 4.0.0 , installed 3.11.0 [Updatable] Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "onkyo" : 2.1.2 , installed 2.1.2 Adapter "onvif" : 1.0.5 , installed 1.0.5 Adapter "openweathermap": 0.4.3 , installed 0.3.9 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.4 , installed 3.0.3 [Updatable] Adapter "radar2" : 2.0.7 , installed 2.0.7 Adapter "robonect" : 1.2.0 , installed 0.1.4 [Updatable] Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.4.5 , installed 6.4.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "solax" : 0.7.7 , installed 0.4.3 [Updatable] Adapter "sonoff" : 3.0.3 , installed 2.5.3 [Updatable] Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "vw-connect" : 0.1.3 , installed 0.1.3 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wled" : 0.7.0 , installed 0.6.7 [Updatable] Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "zigbee" : 1.8.24 , installed 1.8.24 Objects and States Please stand by - This may take a while Objects: 30015 States: 21061 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:3 http://archive.raspberrypi.org/debian buster InRelease Hit:4 https://deb.nodesource.com/node_18.x buster InRelease Reading package lists... Pending Updates: 90 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 16955 542/cupsd tcp 0 0 192.168.1.4:2010 0.0.0.0:* LISTEN 1001 83598 17507/io.hm-rpc.1 tcp 0 0 192.168.1.4:2001 0.0.0.0:* LISTEN 1001 85041 17496/io.hm-rpc.0 tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 18433 639/smbd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 18294 634/sshd tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 16384 639/smbd tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 82646 17367/iobroker.js-c tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 83400 17367/iobroker.js-c tcp 0 0 0.0.0.0:1899 0.0.0.0:* LISTEN 1001 83707 17617/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 83624 17549/io.sonoff.0 tcp6 0 0 :::139 :::* LISTEN 0 16383 639/smbd tcp6 0 0 :::22 :::* LISTEN 0 18296 634/sshd tcp6 0 0 :::445 :::* LISTEN 0 16382 639/smbd tcp6 0 0 :::8081 :::* LISTEN 1001 82724 17386/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 86674 18074/io.web.0 tcp6 0 0 ::1:631 :::* LISTEN 0 16954 542/cupsd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16254 624/cups-browsed udp 0 0 192.168.1.255:137 0.0.0.0:* 0 14171 622/nmbd udp 0 0 192.168.1.4:137 0.0.0.0:* 0 14170 622/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 14160 622/nmbd udp 0 0 192.168.1.255:138 0.0.0.0:* 0 14173 622/nmbd udp 0 0 192.168.1.4:138 0.0.0.0:* 0 14172 622/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 14161 622/nmbd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 86045 17583/io.mihome-vac udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 84635 18095/io.wled.0 udp 0 0 192.168.1.4:5353 0.0.0.0:* 1001 85137 17564/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 16186 538/avahi-daemon: r udp 0 0 0.0.0.0:52157 0.0.0.0:* 108 16188 538/avahi-daemon: r udp 0 0 0.0.0.0:42012 0.0.0.0:* 1001 95341 17639/io.shelly.1 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 86355 17639/io.shelly.1 udp6 0 0 :::5353 :::* 108 16187 538/avahi-daemon: r udp6 0 0 :::56338 :::* 108 16189 538/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-09-28 12:18:50.877 - warn: wled.0 (18095) State attribute definition missing for : m12 with value : 0 2023-09-28 12:18:51.005 - info: wled.0 (18095) Bonjour service started, new devices will be detected automatically 2023-09-28 12:18:51.117 - info: wled.0 (18095) WLED connected 2023-09-28 12:18:51.481 - warn: wled.0 (18095) State attribute definition missing for : liveseg with value : -1 2023-09-28 12:18:51.689 - warn: wled.0 (18095) State attribute definition missing for : cpalcount with value : 0 2023-09-28 12:18:51.746 - warn: wled.0 (18095) State attribute definition missing for : 0 with value : 0 2023-09-28 12:18:52.473 - info: info.0 (17779) Reading process data every 8 seconds. 2023-09-28 12:18:52.704 - warn: wled.0 (18095) State attribute definition missing for : c1 with value : 128 2023-09-28 12:18:52.712 - warn: wled.0 (18095) State attribute definition missing for : c2 with value : 128 2023-09-28 12:18:52.722 - warn: wled.0 (18095) State attribute definition missing for : c3 with value : 16 2023-09-28 12:18:52.754 - warn: wled.0 (18095) State attribute definition missing for : o1 with value : false 2023-09-28 12:18:52.765 - warn: wled.0 (18095) State attribute definition missing for : o2 with value : false 2023-09-28 12:18:52.787 - warn: wled.0 (18095) State attribute definition missing for : o3 with value : false 2023-09-28 12:18:52.801 - warn: wled.0 (18095) State attribute definition missing for : si with value : 0 2023-09-28 12:18:52.813 - warn: wled.0 (18095) State attribute definition missing for : m12 with value : 0 2023-09-28 12:18:53.931 - info: mihome-vacuum.0 (17583) State value to set for "mihome-vacuum.0.info.water_box" has to be type "string" but received type "boolean" 2023-09-28 12:18:55.143 - info: info.0 (17779) State value to set for "info.0.sysinfo.disks.blockDevices.dev1.size" has to be type "string" but received type "number" 2023-09-28 12:18:55.424 - info: info.0 (17779) State value to set for "info.0.sysinfo.disks.blockDevices.dev2.size" has to be type "string" but received type "number" 2023-09-28 12:18:56.149 - info: info.0 (17779) State value to set for "info.0.sysinfo.disks.fsSize.fs0.type" has to be type "undefined" but received type "string" 2023-09-28 12:18:57.015 - info: info.0 (17779) Reading disk data every 8 seconds. 2023-09-28 12:18:57.464 - info: openweathermap.0 (17538) Terminated (NO_ERROR): Without reason 2023-09-28 12:18:58.302 - info: host.ioBroker-Pi4 instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2023-09-28 12:19:00.424 - info: info.0 (17779) State value to set for "info.0.sysinfo.network.interfaces.iface0.dhcp" has to be type "string" but received type "boolean" 2023-09-28 12:19:01.031 - info: wled.0 (18095) WLED initialisation finalized, ready to do my job have fun ! 2023-09-28 12:19:01.939 - info: info.0 (17779) Reading network data every 3 seconds.============ Mark until here for C&P =============
Was mir so als Besonderheit bei mir einfällt - ich hatte mal den RPi4 als Master/Slave zu laufen - aber ich habe schon vor längerer Zeit den Slave von System deinstalliert (aber vielleicht nicht richtig ?). Ob das was mit dem Problem zu tun hat, kann ich aber nicht sagen :-(
Was muss ich tun ?
-
also - bei mir lief die Installation nach obiger Anleitung völlig fehlerfrei durch. Es funktioniert im Prinzip auch alles wie vorher - nur kann ich Adapter nicht updaten/instllieren, die den js-controller 5.x voraussetzen - es wird seitens ioBroker gemeckert, dass noch die Version 4.0.24 installiert sei ??
Wenn ich mir die Ausgabe von iob diag ansehe, dann sieht (für mich) auch alles fehlerfrei aus und dort wird auch die js-controller version 5.0.12 reportet. ?? RPi4 wurde bereits mehrfach neu gebootet.
======== Start marking the full check here =========Skript v.2023-06-20 *** BASE SYSTEM *** Static hostname: ioBroker-Pi4 Icon name: computer Machine ID: db4e6210948f4c2fbbfcc8b99fdb2210 Boot ID: a3037da1fe234331bbb0cb1822274c48 Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 6.1.10-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 12:16:17 up 16 min, 2 users, load average: 3.80, 2.03, 1.43 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=51.6'C volt=0.8500V *** Time and Time Zones *** Local time: Thu 2023-09-28 12:16:17 CEST Universal time: Thu 2023-09-28 10:16:17 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 1.4G 5.9G 9.0M 550M 6.2G Swap: 99M 0B 99M Total: 8.0G 1.4G 6.0G 7897 M total memory 1449 M used memory 1576 M active memory 180 M inactive memory 5897 M free memory 86 M buffer memory 464 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 110G 28G 79G 26% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 3.9G 9.5M 3.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sda1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 790M 0 790M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Sep 28 11:59:22 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:EE:B3:A8 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 root=PARTUUID=ffb03b60-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu Sep 28 11:59:24 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Thu Sep 28 11:59:24 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Thu Sep 28 11:59:27 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 329M /var/ 128M /var/lib 93M /var/cache 78M /var/cache/apt 69M /var/lib/apt/lists Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 4.1G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 16G /opt/iobroker/iobroker-data/history 16G /opt/iobroker/iobroker-data/ 389M /opt/iobroker/iobroker-data/files 234M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/objects.json.migrated 24M /opt/iobroker/iobroker-data/objects.json.bak.migrated 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 0 *** ioBroker-Installation *** ioBroker Status Cannot load "custom": Connection is closed. Cannot initialize database scripts: Cannot load "custom" into objects database: Connection is closed. Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"! No configuration change needed. Multihost discovery server: disabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0 Core adapters versions js-controller: 5.0.12 admin: 6.10.4 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : ioBroker-Pi4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : ioBroker-Pi4 - enabled + system.adapter.backitup.0 : backitup : ioBroker-Pi4 - enabled system.adapter.bring.0 : bring : ioBroker-Pi4 - disabled system.adapter.chromecast.0 : chromecast : ioBroker-Pi4 - disabled system.adapter.daswetter.0 : daswetter : ioBroker-Pi4 - enabled system.adapter.denon.0 : denon : ioBroker-Pi4 - disabled + system.adapter.device-reminder.0 : device-reminder : ioBroker-Pi4 - enabled system.adapter.devices.0 : devices : ioBroker-Pi4 - disabled + system.adapter.discovery.0 : discovery : ioBroker-Pi4 - enabled system.adapter.emby.0 : emby : ioBroker-Pi4 - disabled system.adapter.ems-esp.0 : ems-esp : ioBroker-Pi4 - disabled system.adapter.feiertage.0 : feiertage : ioBroker-Pi4 - disabled system.adapter.flot.0 : flot : ioBroker-Pi4 - disabled system.adapter.fritzdect.0 : fritzdect : ioBroker-Pi4 - disabled system.adapter.go-e.0 : go-e : ioBroker-Pi4 - disabled system.adapter.harmony.0 : harmony : ioBroker-Pi4 - disabled + system.adapter.heatingcontrol.0 : heatingcontrol : ioBroker-Pi4 - enabled + system.adapter.history.0 : history : ioBroker-Pi4 - enabled + system.adapter.hm-rega.0 : hm-rega : ioBroker-Pi4 - enabled + system.adapter.hm-rpc.0 : hm-rpc : ioBroker-Pi4 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBroker-Pi4 - enabled, port: 0 system.adapter.hs100.0 : hs100 : ioBroker-Pi4 - disabled system.adapter.ical.0 : ical : ioBroker-Pi4 - enabled system.adapter.icons-icons8.0 : icons-icons8 : ioBroker-Pi4 - disabled system.adapter.icons-material-png.0 : icons-material-png : ioBroker-Pi4 - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ioBroker-Pi4 - disabled system.adapter.info.0 : info : ioBroker-Pi4 - enabled + system.adapter.iot.0 : iot : ioBroker-Pi4 - enabled system.adapter.iqontrol.0 : iqontrol : ioBroker-Pi4 - disabled + system.adapter.javascript.0 : javascript : ioBroker-Pi4 - enabled system.adapter.kodi.0 : kodi : ioBroker-Pi4 - disabled, port: 9090 + system.adapter.lgtv.0 : lgtv : ioBroker-Pi4 - enabled system.adapter.lgtv.1 : lgtv : ioBroker-Pi4 - enabled system.adapter.mercedesme.0 : mercedesme : ioBroker-Pi4 - disabled system.adapter.meross.0 : meross : ioBroker-Pi4 - disabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker-Pi4 - enabled, port: 54321 system.adapter.mobile.0 : mobile : ioBroker-Pi4 - disabled system.adapter.net-tools.0 : net-tools : ioBroker-Pi4 - disabled + system.adapter.onkyo.0 : onkyo : ioBroker-Pi4 - enabled system.adapter.onvif.0 : onvif : ioBroker-Pi4 - disabled + system.adapter.openweathermap.0 : openweathermap : ioBroker-Pi4 - enabled system.adapter.ping.0 : ping : ioBroker-Pi4 - disabled + system.adapter.pushover.0 : pushover : ioBroker-Pi4 - enabled system.adapter.radar2.0 : radar2 : ioBroker-Pi4 - disabled system.adapter.robonect.0 : robonect : ioBroker-Pi4 - disabled + system.adapter.scenes.0 : scenes : ioBroker-Pi4 - enabled + system.adapter.shelly.0 : shelly : ioBroker-Pi4 - enabled, port: 1899, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : ioBroker-Pi4 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.smartgarden.0 : smartgarden : ioBroker-Pi4 - enabled + system.adapter.solax.0 : solax : ioBroker-Pi4 - enabled + system.adapter.sonoff.0 : sonoff : ioBroker-Pi4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : ioBroker-Pi4 - enabled + system.adapter.sourceanalytix.1 : sourceanalytix : ioBroker-Pi4 - enabled system.adapter.telegram.0 : telegram : ioBroker-Pi4 - disabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : ioBroker-Pi4 - enabled + system.adapter.tr-064.0 : tr-064 : ioBroker-Pi4 - enabled system.adapter.tr-064.1 : tr-064 : ioBroker-Pi4 - disabled system.adapter.tr-064.2 : tr-064 : ioBroker-Pi4 - disabled system.adapter.tuya.0 : tuya : ioBroker-Pi4 - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : ioBroker-Pi4 - disabled system.adapter.vis-google-fonts.0 : vis-google-fonts : ioBroker-Pi4 - disabled system.adapter.vis-history.0 : vis-history : ioBroker-Pi4 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBroker-Pi4 - disabled system.adapter.vis-inventwo.0 : vis-inventwo : ioBroker-Pi4 - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker-Pi4 - disabled system.adapter.vis-justgage.0 : vis-justgage : ioBroker-Pi4 - disabled system.adapter.vis-keyboard.0 : vis-keyboard : ioBroker-Pi4 - disabled system.adapter.vis-lcars.0 : vis-lcars : ioBroker-Pi4 - disabled system.adapter.vis-map.0 : vis-map : ioBroker-Pi4 - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : ioBroker-Pi4 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBroker-Pi4 - disabled system.adapter.vis-weather.0 : vis-weather : ioBroker-Pi4 - disabled system.adapter.vis.0 : vis : ioBroker-Pi4 - enabled + system.adapter.vw-connect.0 : vw-connect : ioBroker-Pi4 - enabled + system.adapter.web.0 : web : ioBroker-Pi4 - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : ioBroker-Pi4 - disabled system.adapter.whatsapp-cmb.1 : whatsapp-cmb : ioBroker-Pi4 - disabled + system.adapter.wled.0 : wled : ioBroker-Pi4 - enabled + system.adapter.zigbee.0 : zigbee : ioBroker-Pi4 - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBroker-Pi4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : ioBroker-Pi4 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBroker-Pi4 - enabled, port: 0 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker-Pi4 - enabled, port: 54321 + system.adapter.shelly.0 : shelly : ioBroker-Pi4 - enabled, port: 1899, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : ioBroker-Pi4 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : ioBroker-Pi4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBroker-Pi4 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : ioBroker-Pi4 - enabled, port: /dev/ttyUSB0 ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Beta (latest) Installed ioBroker-Instances Used repository: Beta (latest) Adapter "admin" : 6.10.4 , installed 6.10.4 Adapter "alexa2" : 3.25.2 , installed 3.24.1 [Updatable] Adapter "backitup" : 2.8.1 , installed 2.6.23 [Updatable] Adapter "bring" : 1.8.4 , installed 1.8.1 [Updatable] Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "denon" : 1.15.4 , installed 1.15.4 Adapter "device-reminder": 2.0.1 , installed 1.2.9 [Updatable] Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.1.0 , installed 3.1.0 [Updatable] Adapter "emby" : 1.0.2 , installed 1.0.2 Adapter "ems-esp" : 2.4.1 , installed 2.2.0 [Updatable] Adapter "feiertage" : 1.1.4 , installed 1.1.0 [Updatable] Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.4.1 , installed 2.3.1 [Updatable] Adapter "go-e" : 1.0.27 , installed 1.0.27 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "heatingcontrol": 2.11.1 , installed 2.11.1 Adapter "history" : 3.0.0 , installed 2.2.6 [Updatable] Adapter "hm-rega" : 4.0.0 , installed 3.0.47 [Updatable] Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "hs100" : 2.1.2 , installed 2.1.2 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "info" : 2.0.0 , installed 1.9.26 [Updatable] Adapter "iot" : 2.0.11 , installed 1.14.5 [Updatable] Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "kodi" : 3.0.0 , installed 2.0.9 [Updatable] Adapter "lgtv" : 1.1.12 , installed 1.1.12 Adapter "mercedesme" : 0.1.3 , installed 0.1.3 Adapter "meross" : 1.15.1 , installed 1.15.1 Adapter "mihome-vacuum": 4.0.0 , installed 3.11.0 [Updatable] Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "onkyo" : 2.1.2 , installed 2.1.2 Adapter "onvif" : 1.0.5 , installed 1.0.5 Adapter "openweathermap": 0.4.3 , installed 0.3.9 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.4 , installed 3.0.3 [Updatable] Adapter "radar2" : 2.0.7 , installed 2.0.7 Adapter "robonect" : 1.2.0 , installed 0.1.4 [Updatable] Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.4.5 , installed 6.4.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "solax" : 0.7.7 , installed 0.4.3 [Updatable] Adapter "sonoff" : 3.0.3 , installed 2.5.3 [Updatable] Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "vw-connect" : 0.1.3 , installed 0.1.3 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wled" : 0.7.0 , installed 0.6.7 [Updatable] Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "zigbee" : 1.8.24 , installed 1.8.24 Objects and States Please stand by - This may take a while Objects: 30015 States: 21061 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:3 http://archive.raspberrypi.org/debian buster InRelease Hit:4 https://deb.nodesource.com/node_18.x buster InRelease Reading package lists... Pending Updates: 90 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 16955 542/cupsd tcp 0 0 192.168.1.4:2010 0.0.0.0:* LISTEN 1001 83598 17507/io.hm-rpc.1 tcp 0 0 192.168.1.4:2001 0.0.0.0:* LISTEN 1001 85041 17496/io.hm-rpc.0 tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 18433 639/smbd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 18294 634/sshd tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 16384 639/smbd tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 82646 17367/iobroker.js-c tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 83400 17367/iobroker.js-c tcp 0 0 0.0.0.0:1899 0.0.0.0:* LISTEN 1001 83707 17617/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 83624 17549/io.sonoff.0 tcp6 0 0 :::139 :::* LISTEN 0 16383 639/smbd tcp6 0 0 :::22 :::* LISTEN 0 18296 634/sshd tcp6 0 0 :::445 :::* LISTEN 0 16382 639/smbd tcp6 0 0 :::8081 :::* LISTEN 1001 82724 17386/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 86674 18074/io.web.0 tcp6 0 0 ::1:631 :::* LISTEN 0 16954 542/cupsd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16254 624/cups-browsed udp 0 0 192.168.1.255:137 0.0.0.0:* 0 14171 622/nmbd udp 0 0 192.168.1.4:137 0.0.0.0:* 0 14170 622/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 14160 622/nmbd udp 0 0 192.168.1.255:138 0.0.0.0:* 0 14173 622/nmbd udp 0 0 192.168.1.4:138 0.0.0.0:* 0 14172 622/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 14161 622/nmbd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 86045 17583/io.mihome-vac udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 84635 18095/io.wled.0 udp 0 0 192.168.1.4:5353 0.0.0.0:* 1001 85137 17564/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 16186 538/avahi-daemon: r udp 0 0 0.0.0.0:52157 0.0.0.0:* 108 16188 538/avahi-daemon: r udp 0 0 0.0.0.0:42012 0.0.0.0:* 1001 95341 17639/io.shelly.1 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 86355 17639/io.shelly.1 udp6 0 0 :::5353 :::* 108 16187 538/avahi-daemon: r udp6 0 0 :::56338 :::* 108 16189 538/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-09-28 12:18:50.877 - warn: wled.0 (18095) State attribute definition missing for : m12 with value : 0 2023-09-28 12:18:51.005 - info: wled.0 (18095) Bonjour service started, new devices will be detected automatically 2023-09-28 12:18:51.117 - info: wled.0 (18095) WLED connected 2023-09-28 12:18:51.481 - warn: wled.0 (18095) State attribute definition missing for : liveseg with value : -1 2023-09-28 12:18:51.689 - warn: wled.0 (18095) State attribute definition missing for : cpalcount with value : 0 2023-09-28 12:18:51.746 - warn: wled.0 (18095) State attribute definition missing for : 0 with value : 0 2023-09-28 12:18:52.473 - info: info.0 (17779) Reading process data every 8 seconds. 2023-09-28 12:18:52.704 - warn: wled.0 (18095) State attribute definition missing for : c1 with value : 128 2023-09-28 12:18:52.712 - warn: wled.0 (18095) State attribute definition missing for : c2 with value : 128 2023-09-28 12:18:52.722 - warn: wled.0 (18095) State attribute definition missing for : c3 with value : 16 2023-09-28 12:18:52.754 - warn: wled.0 (18095) State attribute definition missing for : o1 with value : false 2023-09-28 12:18:52.765 - warn: wled.0 (18095) State attribute definition missing for : o2 with value : false 2023-09-28 12:18:52.787 - warn: wled.0 (18095) State attribute definition missing for : o3 with value : false 2023-09-28 12:18:52.801 - warn: wled.0 (18095) State attribute definition missing for : si with value : 0 2023-09-28 12:18:52.813 - warn: wled.0 (18095) State attribute definition missing for : m12 with value : 0 2023-09-28 12:18:53.931 - info: mihome-vacuum.0 (17583) State value to set for "mihome-vacuum.0.info.water_box" has to be type "string" but received type "boolean" 2023-09-28 12:18:55.143 - info: info.0 (17779) State value to set for "info.0.sysinfo.disks.blockDevices.dev1.size" has to be type "string" but received type "number" 2023-09-28 12:18:55.424 - info: info.0 (17779) State value to set for "info.0.sysinfo.disks.blockDevices.dev2.size" has to be type "string" but received type "number" 2023-09-28 12:18:56.149 - info: info.0 (17779) State value to set for "info.0.sysinfo.disks.fsSize.fs0.type" has to be type "undefined" but received type "string" 2023-09-28 12:18:57.015 - info: info.0 (17779) Reading disk data every 8 seconds. 2023-09-28 12:18:57.464 - info: openweathermap.0 (17538) Terminated (NO_ERROR): Without reason 2023-09-28 12:18:58.302 - info: host.ioBroker-Pi4 instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2023-09-28 12:19:00.424 - info: info.0 (17779) State value to set for "info.0.sysinfo.network.interfaces.iface0.dhcp" has to be type "string" but received type "boolean" 2023-09-28 12:19:01.031 - info: wled.0 (18095) WLED initialisation finalized, ready to do my job have fun ! 2023-09-28 12:19:01.939 - info: info.0 (17779) Reading network data every 3 seconds.============ Mark until here for C&P =============
Was mir so als Besonderheit bei mir einfällt - ich hatte mal den RPi4 als Master/Slave zu laufen - aber ich habe schon vor längerer Zeit den Slave von System deinstalliert (aber vielleicht nicht richtig ?). Ob das was mit dem Problem zu tun hat, kann ich aber nicht sagen :-(
Was muss ich tun ?
@laola sagte in js-controller 5.0.x jetzt für alle User im STABLE!:
Pending Updates: 90
bring die erstmal aufs System - vll hilfts ja
Lehrling seit 1975 !!!
Beitrag geholfen ? dann gerne ein upvote rechts unten im Beitrag klicken ;)
https://forum.iobroker.net/topic/51555/hinweise-f%C3%BCr-gute-forenbeitr%C3%A4ge -
@laola sagte in js-controller 5.0.x jetzt für alle User im STABLE!:
Pending Updates: 90
bring die erstmal aufs System - vll hilfts ja
-
also - bei mir lief die Installation nach obiger Anleitung völlig fehlerfrei durch. Es funktioniert im Prinzip auch alles wie vorher - nur kann ich Adapter nicht updaten/instllieren, die den js-controller 5.x voraussetzen - es wird seitens ioBroker gemeckert, dass noch die Version 4.0.24 installiert sei ??
Wenn ich mir die Ausgabe von iob diag ansehe, dann sieht (für mich) auch alles fehlerfrei aus und dort wird auch die js-controller version 5.0.12 reportet. ?? RPi4 wurde bereits mehrfach neu gebootet.
======== Start marking the full check here =========Skript v.2023-06-20 *** BASE SYSTEM *** Static hostname: ioBroker-Pi4 Icon name: computer Machine ID: db4e6210948f4c2fbbfcc8b99fdb2210 Boot ID: a3037da1fe234331bbb0cb1822274c48 Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 6.1.10-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 12:16:17 up 16 min, 2 users, load average: 3.80, 2.03, 1.43 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=51.6'C volt=0.8500V *** Time and Time Zones *** Local time: Thu 2023-09-28 12:16:17 CEST Universal time: Thu 2023-09-28 10:16:17 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 1.4G 5.9G 9.0M 550M 6.2G Swap: 99M 0B 99M Total: 8.0G 1.4G 6.0G 7897 M total memory 1449 M used memory 1576 M active memory 180 M inactive memory 5897 M free memory 86 M buffer memory 464 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 110G 28G 79G 26% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 3.9G 9.5M 3.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sda1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 790M 0 790M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Sep 28 11:59:22 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:EE:B3:A8 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 root=PARTUUID=ffb03b60-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu Sep 28 11:59:24 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Thu Sep 28 11:59:24 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Thu Sep 28 11:59:27 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 329M /var/ 128M /var/lib 93M /var/cache 78M /var/cache/apt 69M /var/lib/apt/lists Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 4.1G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 16G /opt/iobroker/iobroker-data/history 16G /opt/iobroker/iobroker-data/ 389M /opt/iobroker/iobroker-data/files 234M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 27M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/objects.json.migrated 24M /opt/iobroker/iobroker-data/objects.json.bak.migrated 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: 0 *** ioBroker-Installation *** ioBroker Status Cannot load "custom": Connection is closed. Cannot initialize database scripts: Cannot load "custom" into objects database: Connection is closed. Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"! No configuration change needed. Multihost discovery server: disabled Discovery authentication: enabled Persistent activation: disabled Objects: jsonl on 0.0.0.0 States: jsonl on 0.0.0.0 Core adapters versions js-controller: 5.0.12 admin: 6.10.4 javascript: 7.1.4 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : ioBroker-Pi4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : ioBroker-Pi4 - enabled + system.adapter.backitup.0 : backitup : ioBroker-Pi4 - enabled system.adapter.bring.0 : bring : ioBroker-Pi4 - disabled system.adapter.chromecast.0 : chromecast : ioBroker-Pi4 - disabled system.adapter.daswetter.0 : daswetter : ioBroker-Pi4 - enabled system.adapter.denon.0 : denon : ioBroker-Pi4 - disabled + system.adapter.device-reminder.0 : device-reminder : ioBroker-Pi4 - enabled system.adapter.devices.0 : devices : ioBroker-Pi4 - disabled + system.adapter.discovery.0 : discovery : ioBroker-Pi4 - enabled system.adapter.emby.0 : emby : ioBroker-Pi4 - disabled system.adapter.ems-esp.0 : ems-esp : ioBroker-Pi4 - disabled system.adapter.feiertage.0 : feiertage : ioBroker-Pi4 - disabled system.adapter.flot.0 : flot : ioBroker-Pi4 - disabled system.adapter.fritzdect.0 : fritzdect : ioBroker-Pi4 - disabled system.adapter.go-e.0 : go-e : ioBroker-Pi4 - disabled system.adapter.harmony.0 : harmony : ioBroker-Pi4 - disabled + system.adapter.heatingcontrol.0 : heatingcontrol : ioBroker-Pi4 - enabled + system.adapter.history.0 : history : ioBroker-Pi4 - enabled + system.adapter.hm-rega.0 : hm-rega : ioBroker-Pi4 - enabled + system.adapter.hm-rpc.0 : hm-rpc : ioBroker-Pi4 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBroker-Pi4 - enabled, port: 0 system.adapter.hs100.0 : hs100 : ioBroker-Pi4 - disabled system.adapter.ical.0 : ical : ioBroker-Pi4 - enabled system.adapter.icons-icons8.0 : icons-icons8 : ioBroker-Pi4 - disabled system.adapter.icons-material-png.0 : icons-material-png : ioBroker-Pi4 - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ioBroker-Pi4 - disabled system.adapter.info.0 : info : ioBroker-Pi4 - enabled + system.adapter.iot.0 : iot : ioBroker-Pi4 - enabled system.adapter.iqontrol.0 : iqontrol : ioBroker-Pi4 - disabled + system.adapter.javascript.0 : javascript : ioBroker-Pi4 - enabled system.adapter.kodi.0 : kodi : ioBroker-Pi4 - disabled, port: 9090 + system.adapter.lgtv.0 : lgtv : ioBroker-Pi4 - enabled system.adapter.lgtv.1 : lgtv : ioBroker-Pi4 - enabled system.adapter.mercedesme.0 : mercedesme : ioBroker-Pi4 - disabled system.adapter.meross.0 : meross : ioBroker-Pi4 - disabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker-Pi4 - enabled, port: 54321 system.adapter.mobile.0 : mobile : ioBroker-Pi4 - disabled system.adapter.net-tools.0 : net-tools : ioBroker-Pi4 - disabled + system.adapter.onkyo.0 : onkyo : ioBroker-Pi4 - enabled system.adapter.onvif.0 : onvif : ioBroker-Pi4 - disabled + system.adapter.openweathermap.0 : openweathermap : ioBroker-Pi4 - enabled system.adapter.ping.0 : ping : ioBroker-Pi4 - disabled + system.adapter.pushover.0 : pushover : ioBroker-Pi4 - enabled system.adapter.radar2.0 : radar2 : ioBroker-Pi4 - disabled system.adapter.robonect.0 : robonect : ioBroker-Pi4 - disabled + system.adapter.scenes.0 : scenes : ioBroker-Pi4 - enabled + system.adapter.shelly.0 : shelly : ioBroker-Pi4 - enabled, port: 1899, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : ioBroker-Pi4 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.smartgarden.0 : smartgarden : ioBroker-Pi4 - enabled + system.adapter.solax.0 : solax : ioBroker-Pi4 - enabled + system.adapter.sonoff.0 : sonoff : ioBroker-Pi4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : ioBroker-Pi4 - enabled + system.adapter.sourceanalytix.1 : sourceanalytix : ioBroker-Pi4 - enabled system.adapter.telegram.0 : telegram : ioBroker-Pi4 - disabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : ioBroker-Pi4 - enabled + system.adapter.tr-064.0 : tr-064 : ioBroker-Pi4 - enabled system.adapter.tr-064.1 : tr-064 : ioBroker-Pi4 - disabled system.adapter.tr-064.2 : tr-064 : ioBroker-Pi4 - disabled system.adapter.tuya.0 : tuya : ioBroker-Pi4 - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : ioBroker-Pi4 - disabled system.adapter.vis-google-fonts.0 : vis-google-fonts : ioBroker-Pi4 - disabled system.adapter.vis-history.0 : vis-history : ioBroker-Pi4 - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBroker-Pi4 - disabled system.adapter.vis-inventwo.0 : vis-inventwo : ioBroker-Pi4 - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBroker-Pi4 - disabled system.adapter.vis-justgage.0 : vis-justgage : ioBroker-Pi4 - disabled system.adapter.vis-keyboard.0 : vis-keyboard : ioBroker-Pi4 - disabled system.adapter.vis-lcars.0 : vis-lcars : ioBroker-Pi4 - disabled system.adapter.vis-map.0 : vis-map : ioBroker-Pi4 - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : ioBroker-Pi4 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBroker-Pi4 - disabled system.adapter.vis-weather.0 : vis-weather : ioBroker-Pi4 - disabled system.adapter.vis.0 : vis : ioBroker-Pi4 - enabled + system.adapter.vw-connect.0 : vw-connect : ioBroker-Pi4 - enabled + system.adapter.web.0 : web : ioBroker-Pi4 - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : ioBroker-Pi4 - disabled system.adapter.whatsapp-cmb.1 : whatsapp-cmb : ioBroker-Pi4 - disabled + system.adapter.wled.0 : wled : ioBroker-Pi4 - enabled + system.adapter.zigbee.0 : zigbee : ioBroker-Pi4 - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBroker-Pi4 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : ioBroker-Pi4 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBroker-Pi4 - enabled, port: 0 + system.adapter.mihome-vacuum.0 : mihome-vacuum : ioBroker-Pi4 - enabled, port: 54321 + system.adapter.shelly.0 : shelly : ioBroker-Pi4 - enabled, port: 1899, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : ioBroker-Pi4 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : ioBroker-Pi4 - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBroker-Pi4 - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : ioBroker-Pi4 - enabled, port: /dev/ttyUSB0 ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Beta (latest) Installed ioBroker-Instances Used repository: Beta (latest) Adapter "admin" : 6.10.4 , installed 6.10.4 Adapter "alexa2" : 3.25.2 , installed 3.24.1 [Updatable] Adapter "backitup" : 2.8.1 , installed 2.6.23 [Updatable] Adapter "bring" : 1.8.4 , installed 1.8.1 [Updatable] Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "denon" : 1.15.4 , installed 1.15.4 Adapter "device-reminder": 2.0.1 , installed 1.2.9 [Updatable] Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.1.0 , installed 3.1.0 [Updatable] Adapter "emby" : 1.0.2 , installed 1.0.2 Adapter "ems-esp" : 2.4.1 , installed 2.2.0 [Updatable] Adapter "feiertage" : 1.1.4 , installed 1.1.0 [Updatable] Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.4.1 , installed 2.3.1 [Updatable] Adapter "go-e" : 1.0.27 , installed 1.0.27 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "heatingcontrol": 2.11.1 , installed 2.11.1 Adapter "history" : 3.0.0 , installed 2.2.6 [Updatable] Adapter "hm-rega" : 4.0.0 , installed 3.0.47 [Updatable] Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "hs100" : 2.1.2 , installed 2.1.2 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "info" : 2.0.0 , installed 1.9.26 [Updatable] Adapter "iot" : 2.0.11 , installed 1.14.5 [Updatable] Adapter "iqontrol" : 2.3.0 , installed 2.3.0 Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "kodi" : 3.0.0 , installed 2.0.9 [Updatable] Adapter "lgtv" : 1.1.12 , installed 1.1.12 Adapter "mercedesme" : 0.1.3 , installed 0.1.3 Adapter "meross" : 1.15.1 , installed 1.15.1 Adapter "mihome-vacuum": 4.0.0 , installed 3.11.0 [Updatable] Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "onkyo" : 2.1.2 , installed 2.1.2 Adapter "onvif" : 1.0.5 , installed 1.0.5 Adapter "openweathermap": 0.4.3 , installed 0.3.9 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.4 , installed 3.0.3 [Updatable] Adapter "radar2" : 2.0.7 , installed 2.0.7 Adapter "robonect" : 1.2.0 , installed 0.1.4 [Updatable] Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.4.5 , installed 6.4.1 [Updatable] Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "socketio" : 6.5.5 , installed 6.5.5 Adapter "solax" : 0.7.7 , installed 0.4.3 [Updatable] Adapter "sonoff" : 3.0.3 , installed 2.5.3 [Updatable] Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "vw-connect" : 0.1.3 , installed 0.1.3 Adapter "web" : 6.1.2 , installed 6.1.2 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wled" : 0.7.0 , installed 0.6.7 [Updatable] Adapter "ws" : 2.5.5 , installed 2.5.5 Adapter "zigbee" : 1.8.24 , installed 1.8.24 Objects and States Please stand by - This may take a while Objects: 30015 States: 21061 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:3 http://archive.raspberrypi.org/debian buster InRelease Hit:4 https://deb.nodesource.com/node_18.x buster InRelease Reading package lists... Pending Updates: 90 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 16955 542/cupsd tcp 0 0 192.168.1.4:2010 0.0.0.0:* LISTEN 1001 83598 17507/io.hm-rpc.1 tcp 0 0 192.168.1.4:2001 0.0.0.0:* LISTEN 1001 85041 17496/io.hm-rpc.0 tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 18433 639/smbd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 18294 634/sshd tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 16384 639/smbd tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 82646 17367/iobroker.js-c tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 83400 17367/iobroker.js-c tcp 0 0 0.0.0.0:1899 0.0.0.0:* LISTEN 1001 83707 17617/io.shelly.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 83624 17549/io.sonoff.0 tcp6 0 0 :::139 :::* LISTEN 0 16383 639/smbd tcp6 0 0 :::22 :::* LISTEN 0 18296 634/sshd tcp6 0 0 :::445 :::* LISTEN 0 16382 639/smbd tcp6 0 0 :::8081 :::* LISTEN 1001 82724 17386/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 86674 18074/io.web.0 tcp6 0 0 ::1:631 :::* LISTEN 0 16954 542/cupsd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16254 624/cups-browsed udp 0 0 192.168.1.255:137 0.0.0.0:* 0 14171 622/nmbd udp 0 0 192.168.1.4:137 0.0.0.0:* 0 14170 622/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 14160 622/nmbd udp 0 0 192.168.1.255:138 0.0.0.0:* 0 14173 622/nmbd udp 0 0 192.168.1.4:138 0.0.0.0:* 0 14172 622/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 14161 622/nmbd udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 86045 17583/io.mihome-vac udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 84635 18095/io.wled.0 udp 0 0 192.168.1.4:5353 0.0.0.0:* 1001 85137 17564/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 16186 538/avahi-daemon: r udp 0 0 0.0.0.0:52157 0.0.0.0:* 108 16188 538/avahi-daemon: r udp 0 0 0.0.0.0:42012 0.0.0.0:* 1001 95341 17639/io.shelly.1 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 86355 17639/io.shelly.1 udp6 0 0 :::5353 :::* 108 16187 538/avahi-daemon: r udp6 0 0 :::56338 :::* 108 16189 538/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-09-28 12:18:50.877 - warn: wled.0 (18095) State attribute definition missing for : m12 with value : 0 2023-09-28 12:18:51.005 - info: wled.0 (18095) Bonjour service started, new devices will be detected automatically 2023-09-28 12:18:51.117 - info: wled.0 (18095) WLED connected 2023-09-28 12:18:51.481 - warn: wled.0 (18095) State attribute definition missing for : liveseg with value : -1 2023-09-28 12:18:51.689 - warn: wled.0 (18095) State attribute definition missing for : cpalcount with value : 0 2023-09-28 12:18:51.746 - warn: wled.0 (18095) State attribute definition missing for : 0 with value : 0 2023-09-28 12:18:52.473 - info: info.0 (17779) Reading process data every 8 seconds. 2023-09-28 12:18:52.704 - warn: wled.0 (18095) State attribute definition missing for : c1 with value : 128 2023-09-28 12:18:52.712 - warn: wled.0 (18095) State attribute definition missing for : c2 with value : 128 2023-09-28 12:18:52.722 - warn: wled.0 (18095) State attribute definition missing for : c3 with value : 16 2023-09-28 12:18:52.754 - warn: wled.0 (18095) State attribute definition missing for : o1 with value : false 2023-09-28 12:18:52.765 - warn: wled.0 (18095) State attribute definition missing for : o2 with value : false 2023-09-28 12:18:52.787 - warn: wled.0 (18095) State attribute definition missing for : o3 with value : false 2023-09-28 12:18:52.801 - warn: wled.0 (18095) State attribute definition missing for : si with value : 0 2023-09-28 12:18:52.813 - warn: wled.0 (18095) State attribute definition missing for : m12 with value : 0 2023-09-28 12:18:53.931 - info: mihome-vacuum.0 (17583) State value to set for "mihome-vacuum.0.info.water_box" has to be type "string" but received type "boolean" 2023-09-28 12:18:55.143 - info: info.0 (17779) State value to set for "info.0.sysinfo.disks.blockDevices.dev1.size" has to be type "string" but received type "number" 2023-09-28 12:18:55.424 - info: info.0 (17779) State value to set for "info.0.sysinfo.disks.blockDevices.dev2.size" has to be type "string" but received type "number" 2023-09-28 12:18:56.149 - info: info.0 (17779) State value to set for "info.0.sysinfo.disks.fsSize.fs0.type" has to be type "undefined" but received type "string" 2023-09-28 12:18:57.015 - info: info.0 (17779) Reading disk data every 8 seconds. 2023-09-28 12:18:57.464 - info: openweathermap.0 (17538) Terminated (NO_ERROR): Without reason 2023-09-28 12:18:58.302 - info: host.ioBroker-Pi4 instance system.adapter.openweathermap.0 terminated with code 0 (NO_ERROR) 2023-09-28 12:19:00.424 - info: info.0 (17779) State value to set for "info.0.sysinfo.network.interfaces.iface0.dhcp" has to be type "string" but received type "boolean" 2023-09-28 12:19:01.031 - info: wled.0 (18095) WLED initialisation finalized, ready to do my job have fun ! 2023-09-28 12:19:01.939 - info: info.0 (17779) Reading network data every 3 seconds.============ Mark until here for C&P =============
Was mir so als Besonderheit bei mir einfällt - ich hatte mal den RPi4 als Master/Slave zu laufen - aber ich habe schon vor längerer Zeit den Slave von System deinstalliert (aber vielleicht nicht richtig ?). Ob das was mit dem Problem zu tun hat, kann ich aber nicht sagen :-(
Was muss ich tun ?
@laola sagte in js-controller 5.0.x jetzt für alle User im STABLE!:
Operating System: Raspbian GNU/Linux 10 (buster)
Da wird es ohnehin bald Zeit für 'Großreinemachen.
Ich würde die Gelegenheit nutzen und geich die 64Bit-Version vom Bullseye installieren.ioBroker Status
Cannot load "custom": Connection is closed.Dürfte aber vom Master/Slave-Setup kommen.
-
@djmarc75 verstehe ich nicht - das sind doch die Adapter updates - die haben doch gar nichts mit dem System zu tun. Oder sind das andere Updates ? Wenn ja welche und wie werden die gemacht ?
@laola sagte in js-controller 5.0.x jetzt für alle User im STABLE!:
Oder sind das andere Updates
Systemupdates
sudo apt update sudo apt full-upgradeLehrling seit 1975 !!!
Beitrag geholfen ? dann gerne ein upvote rechts unten im Beitrag klicken ;)
https://forum.iobroker.net/topic/51555/hinweise-f%C3%BCr-gute-forenbeitr%C3%A4ge -
Update gemacht - Rpi4 neu gebootet... Keine Änderung.
Ich habe echt wenig Lust, das gesamte System neu zu installieren - mit der Übernahme von z.B. den Zigbees (und davon habe ich sehr viel) beim Systemwechsel hatte ich ganz, ganz schlechte Erfahrungen gemacht (letztendlich musste ich bisher fast alles Geräte neu anlernen - trotz vorhanden Backup (über den Back-up Adapter)....
-
Update gemacht - Rpi4 neu gebootet... Keine Änderung.
Ich habe echt wenig Lust, das gesamte System neu zu installieren - mit der Übernahme von z.B. den Zigbees (und davon habe ich sehr viel) beim Systemwechsel hatte ich ganz, ganz schlechte Erfahrungen gemacht (letztendlich musste ich bisher fast alles Geräte neu anlernen - trotz vorhanden Backup (über den Back-up Adapter)....
Zigbee hat aber mit dem OS nichts zu schaffen, das spielt in einer eigenen Welt.
Du kommst halt nicht drumherum, früher oder später. Und je früher du den Absprung von einem auslaufenden Sysytem angehst desto einfacher ist das. -
Zigbee hat aber mit dem OS nichts zu schaffen, das spielt in einer eigenen Welt.
Du kommst halt nicht drumherum, früher oder später. Und je früher du den Absprung von einem auslaufenden Sysytem angehst desto einfacher ist das.@thomas-braun dann wohl eher später - wenn ich mal wieder Urlaub habe - so nebenbei wird das nichts... :-(
Hat keiner eine Idee, wie man ioBroker davon überzeugen kann, dass es schon die richtige Version installiert hat ? -
@thomas-braun dann wohl eher später - wenn ich mal wieder Urlaub habe - so nebenbei wird das nichts... :-(
Hat keiner eine Idee, wie man ioBroker davon überzeugen kann, dass es schon die richtige Version installiert hat ? -
@laola wahrscheinlich geistert noch ein
system.host.xyObjekt von deinem alten Host rum+@foxriver76 einfach löschen oder wie werde ich das los ? Wo bzw. wie finde ich das ?
868
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge
ioBroker Community 2014-2025
