NEWS
ioBroker aktualisiert Homematic Datenpunkte nicht mehr
-
@homoran said in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
@menuchim sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
Dieser frische ioBroker kann zwar die Homematic-Geräte einlesen, aber er bekommt nicht zu jedem Gerät die Datenpunkte. Warum, habe ich ehrlich gesagt noch nicht herausgefunden. Bin strikt nach Doku vorgegangen beim einrichten der Adapter.
schalt mal in den Instanzen sentry ab.
wenn das nicht hilft, bitte neuen Threadhabs gefunden, hat nur leider nichts gebracht. Oder muss das für hm-rega auch abgeschaltet werden?
-
@homoran said in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
@menuchim sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
Dieser frische ioBroker kann zwar die Homematic-Geräte einlesen, aber er bekommt nicht zu jedem Gerät die Datenpunkte. Warum, habe ich ehrlich gesagt noch nicht herausgefunden. Bin strikt nach Doku vorgegangen beim einrichten der Adapter.
schalt mal in den Instanzen sentry ab.
wenn das nicht hilft, bitte neuen Threadhabs gefunden, hat nur leider nichts gebracht. Oder muss das für hm-rega auch abgeschaltet werden?
@menuchim sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
hat nur leider nichts gebrach
@homoran sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
wenn das nicht hilft, bitte neuen Thread
-
@ofbeqnpolkkl6mby5e13 @Homoran
habe nun bei beiden genau das gemacht - fixe IP zugewiesen. :-)
@menuchim sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
@ofbeqnpolkkl6mby5e13 @Homoran
habe nun bei beiden genau das gemacht - fixe IP zugewiesen. :-)
Übliche Praxis ist es, nicht den gesamten IP-Adressbereich für DHCP zu verwenden, sondern z. B. von vorne oder hinten 20-30 Adressen für fest zugewiesene IPs freizulassen. Dann braucht man auch in DHCP keine Zuweisungen in der Form machen, dass bestimmten MAC-Adressen immer dieselben IP-Adressen zugewiesen werden.
-
Auch von mir ein Hallo in die Runde,
ich habe ein änliches problem, es wird alles synchronisiert bis auf die Objekt-Namen. Ich habe schon mehrere Neuinstallationen von ioBroker, CCU, hm-rpc, hm-rega.
Das Problem tauchte aber erst nach einem Backup auf ein neu installiertes 64Bit System und das iobroker Backup war von dem 32Bit System.
Bekomme immer diese Fehlermeldung.
Kann mir bitte jemand weiter helfen, ich habe keine Idee mehr?
ioBroker:
Plattform: linux
Betriebssystem: linux
Architektur: arm64
CPUs: 4
Geschwindigkeit: 1800 MHz
Modell: Cortex-A72
RAM: 7.6 GB
System-Betriebszeit: 00:04:18
Node.js: v18.17.0
time: 1690967161861
Adapter-Anzahl: 485
NPM: 9.6.7
Datenträgergröße: 1833.6 GB
Freier Festplattenspeicher: 1827.3 GB
Betriebszeit: 00:03:15iob diag
[Link Text](======== Start marking the full check here =========
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 12:49:32 up 43 min, 3 users, load average: 1.04, 0.72, 0.66 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=53.5'C volt=0.9060V *** Time and Time Zones *** Local time: Wed 2023-08-02 12:49:32 CEST Universal time: Wed 2023-08-02 10:49:32 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** iobroker /home/iobroker iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 2.3G 4.6G 35M 945M 5.4G Swap: 99M 0B 99M Total: 7.9G 2.3G 4.7G 7811 M total memory 2252 M used memory 2492 M active memory 486 M inactive memory 4613 M free memory 93 M buffer memory 852 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 1.8T 6.3G 1.8T 1% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 782M 20K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Aug 2 12:05:54 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B4:7F:C6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=85dbb105-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Wed Aug 2 12:05:58 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Aug 2 12:05:58 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Wed Aug 2 12:06:04 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 766M /var/ 392M /var/lib 209M /var/lib/influxdb/engine 209M /var/lib/influxdb 186M /var/lib/influxdb/engine/data Archived and active journals take up 96.0M in the file system. /opt/iobroker/backups: 117M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 531M /opt/iobroker/iobroker-data/ 360M /opt/iobroker/iobroker-data/files 138M /opt/iobroker/iobroker-data/backup-objects 88M /opt/iobroker/iobroker-data/files/echarts.admin 57M /opt/iobroker/iobroker-data/files/echarts The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 23M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.0 /usr/bin/node v18.17.0 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.0-deb-1nodesource1 Candidate: 18.17.0-deb-1nodesource1 Version table: *** 18.17.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.6.1 javascript: 7.0.3 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10 (SSL), run as: admin + system.adapter.alarm.0 : alarm : ioBrokerMaster - enabled system.adapter.alias-manager.0 : alias-manager : ioBrokerMaster - disabled + system.adapter.backitup.0 : backitup : ioBrokerMaster - enabled + system.adapter.backitup.1 : backitup : iob-slave1-Nowak-Automatisierung - enabled system.adapter.bshb.0 : bshb : ioBrokerMaster - disabled system.adapter.device-reminder.0 : device-reminder : ioBrokerMaster - disabled system.adapter.devices.0 : devices : ioBrokerMaster - disabled + system.adapter.discovery.0 : discovery : ioBrokerMaster - enabled + system.adapter.doorbird.0 : doorbird : ioBrokerMaster - enabled system.adapter.dwd.0 : dwd : ioBrokerMaster - enabled + system.adapter.echarts.0 : echarts : ioBrokerMaster - enabled system.adapter.feiertage.0 : feiertage : ioBrokerMaster - enabled system.adapter.geofency.0 : geofency : ioBrokerMaster - disabled, port: 7999, bind: 0.0.0.0 + system.adapter.growatt.0 : growatt : ioBrokerMaster - enabled + system.adapter.harmony.0 : harmony : ioBrokerMaster - enabled system.adapter.heatingcontrol.0 : heatingcontrol : ioBrokerMaster - disabled system.adapter.hm-rega.0 : hm-rega : ioBrokerMaster - disabled system.adapter.hm-rpc.0 : hm-rpc : ioBrokerMaster - disabled, port: 0 system.adapter.hm-rpc.1 : hm-rpc : ioBrokerMaster - disabled, port: 0 + system.adapter.hue.0 : hue : ioBrokerMaster - enabled, port: 443 system.adapter.ical.0 : ical : ioBrokerMaster - disabled + system.adapter.influxdb.0 : influxdb : ioBrokerMaster - enabled, port: 8086 + system.adapter.info.0 : info : ioBrokerMaster - enabled + system.adapter.iot.0 : iot : ioBrokerMaster - enabled + system.adapter.jarvis.0 : jarvis : ioBrokerMaster - enabled + system.adapter.javascript.0 : javascript : ioBrokerMaster - enabled + system.adapter.linkeddevices.0 : linkeddevices : ioBrokerMaster - enabled system.adapter.luftdaten.0 : luftdaten : ioBrokerMaster - enabled system.adapter.netatmo.0 : netatmo : ioBrokerMaster - disabled + system.adapter.nina.0 : nina : ioBrokerMaster - enabled system.adapter.odl.0 : odl : ioBrokerMaster - enabled system.adapter.owfs.0 : owfs : ioBrokerMaster - disabled, port: 4304 + system.adapter.pollenflug.0 : pollenflug : ioBrokerMaster - enabled system.adapter.pvforecast.0 : pvforecast : ioBrokerMaster - disabled + system.adapter.rpi2.0 : rpi2 : ioBrokerMaster - enabled + system.adapter.rpi2.1 : rpi2 : iob-slave1-Nowak-Automatisierung - enabled system.adapter.sayit.0 : sayit : ioBrokerMaster - disabled + system.adapter.scenes.0 : scenes : ioBrokerMaster - enabled + system.adapter.shuttercontrol.0 : shuttercontrol : ioBrokerMaster - enabled + system.adapter.smartmeter.0 : smartmeter : iob-slave1-Nowak-Automatisierung - enabled + system.adapter.sonos.0 : sonos : ioBrokerMaster - enabled + system.adapter.sony-bravia.0 : sony-bravia : ioBrokerMaster - enabled + system.adapter.sprinklecontrol.0 : sprinklecontrol : ioBrokerMaster - enabled + system.adapter.statistics.0 : statistics : ioBrokerMaster - enabled system.adapter.synology.0 : synology : ioBrokerMaster - disabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : ioBrokerMaster - enabled + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tr-064.0 : tr-064 : ioBrokerMaster - disabled + system.adapter.unifi.0 : unifi : ioBrokerMaster - enabled + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : ioBrokerMaster - enabled system.adapter.yr.0 : yr : ioBrokerMaster - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10 (SSL), run as: admin + system.adapter.hue.0 : hue : ioBrokerMaster - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : ioBrokerMaster - enabled, port: 8086 + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.6.1 Adapter "alarm" : 3.3.12 , installed 3.3.12 Adapter "alias-manager": 1.2.4 , installed 1.2.4 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "bshb" : 0.2.4 , installed 0.2.4 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "doorbird" : 1.0.5 , installed 1.0.5 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "growatt" : 3.0.2 , installed 3.0.2 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "heatingcontrol": 2.10.6 , installed 2.10.6 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.18 , installed 1.15.18 Adapter "hue" : 3.9.3 , installed 3.9.3 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "jarvis" : 3.1.2 , installed 3.1.2 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "linkeddevices": 1.5.5 , installed 1.5.5 Adapter "luftdaten" : 3.0.0 , installed 3.0.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "odl" : 2.0.5 , installed 2.0.5 Adapter "owfs" : 0.7.0 , installed 0.7.0 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "pvforecast" : 2.7.1 , installed 2.7.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shuttercontrol": 1.5.0 , installed 1.5.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sonos" : 2.3.1 , installed 2.3.1 Adapter "sony-bravia" : 1.0.9 , installed 1.0.9 Adapter "sprinklecontrol": 0.2.13 , installed 0.2.13 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "unifi" : 0.6.6 , installed 0.6.6 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yahka" : 0.17.0 , installed 0.17.0 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 13437 States: 11537 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye-updates InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://repos.influxdata.com/debian bullseye InRelease Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 172.36.0.10:9001 0.0.0.0:* LISTEN 1000 19620 1301/iobroker.js-co tcp 0 0 172.36.0.10:9000 0.0.0.0:* LISTEN 1000 19627 1301/iobroker.js-co tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1000 20148 2402/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14587 583/sshd: /usr/sbin tcp 0 0 127.0.0.1:33917 0.0.0.0:* LISTEN 1000 22669 3113/io.yahka.0 tcp 0 0 172.36.0.10:8100 0.0.0.0:* LISTEN 1000 18939 2211/io.doorbird.0 tcp 0 0 172.36.0.10:8081 0.0.0.0:* LISTEN 1000 20598 1901/io.admin.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 14605 572/cupsd tcp6 0 0 :::61991 :::* LISTEN 1000 19027 2288/io.harmony.0 tcp6 0 0 :::22 :::* LISTEN 0 14589 583/sshd: /usr/sbin tcp6 0 0 :::32841 :::* LISTEN 1000 21472 3113/io.yahka.0 tcp6 0 0 ::1:631 :::* LISTEN 0 14604 572/cupsd tcp6 0 0 :::8082 :::* LISTEN 1000 22647 3098/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 17164 462/influxd tcp6 0 0 :::3500 :::* LISTEN 1000 20891 2092/io.sonos.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13790 456/dhcpcd udp 0 0 0.0.0.0:61991 0.0.0.0:* 1000 19028 2288/io.harmony.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 15687 607/cups-browsed udp 0 0 0.0.0.0:50295 0.0.0.0:* 108 13757 380/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13755 380/avahi-daemon: r udp6 0 0 :::40019 :::* 108 13758 380/avahi-daemon: r udp6 0 0 :::546 :::* 0 16422 456/dhcpcd udp6 0 0 :::5353 :::* 108 13756 380/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-08-02 12:09:17.111 - warn: tankerkoenig.0 (3071) Overrides is missing in config from station Esso Tankstelle. Please check your configuration or reconfigure the stations => edit station => save 2023-08-02 12:09:20.444 - info: host.ioBrokerMaster instance system.adapter.yahka.0 started with pid 3113 2023-08-02 12:10:00.306 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 3181 2023-08-02 12:10:06.743 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 12:15:00.275 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 3536 2023-08-02 12:15:06.898 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 12:20:00.313 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 3908 2023-08-02 12:20:06.935 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 12:25:00.261 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 4263 2023-08-02 12:25:06.797 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 12:30:00.250 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 4618 2023-08-02 12:30:04.309 - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 started with pid 4633 2023-08-02 12:30:07.519 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 12:30:14.279 - warn: luftdaten.0 (4633) State "luftdaten.0.38240.timestamp" has no existing object, this might lead to an error in future versions 2023-08-02 12:30:14.869 - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR) 2023-08-02 12:35:00.229 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 5007 2023-08-02 12:35:06.628 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 12:40:00.194 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 5351 2023-08-02 12:40:06.759 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 12:40:34.074 - info: host.ioBrokerMaster instance system.adapter.odl.0 started with pid 5369 2023-08-02 12:40:40.108 - info: host.ioBrokerMaster instance system.adapter.odl.0 terminated with code 0 (NO_ERROR) 2023-08-02 12:45:00.232 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 5729 2023-08-02 12:45:07.300 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 12:50:00.068 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 7529 2023-08-02 12:50:07.158 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)============ Mark until here for C&P =============
iob diag has finished.)
[Link Text](Copy text starting here:
======================= SUMMARY ======================= v.2023-04-16 Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 12:49:32 up 43 min, 3 users, load average: 1.04, 0.72, 0.66 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=53.5'C volt=0.9060V *** Time and Time Zones *** Local time: Wed 2023-08-02 12:49:32 CEST Universal time: Wed 2023-08-02 10:49:32 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** iobroker /home/iobroker iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 2.3G 4.6G 35M 945M 5.4G Swap: 99M 0B 99M Total: 7.9G 2.3G 4.7G 7811 M total memory 2252 M used memory 2492 M active memory 486 M inactive memory 4613 M free memory 93 M buffer memory 852 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 1.8T 6.3G 1.8T 1% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 782M 20K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Aug 2 12:05:54 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B4:7F:C6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=85dbb105-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Wed Aug 2 12:05:58 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Aug 2 12:05:58 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Wed Aug 2 12:06:04 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 766M /var/ 392M /var/lib 209M /var/lib/influxdb/engine 209M /var/lib/influxdb 186M /var/lib/influxdb/engine/data Archived and active journals take up 96.0M in the file system. /opt/iobroker/backups: 117M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 531M /opt/iobroker/iobroker-data/ 360M /opt/iobroker/iobroker-data/files 138M /opt/iobroker/iobroker-data/backup-objects 88M /opt/iobroker/iobroker-data/files/echarts.admin 57M /opt/iobroker/iobroker-data/files/echarts The Operatingsystem: Debian GNU/Linux 11 (bullseye) Kernel: 6.1.21-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: 1 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.17.0 /usr/bin/node v18.17.0 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 7.8G 2.4G 4.5G 35M 949M 5.3G Swap: 99M 0B 99M Total: 7.9G 2.4G 4.6G Active iob-Instances: 34 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.6.1 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10 (SSL), run as: admin + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 13437 States: 11537 Size of iob-Database: 23M /opt/iobroker/iobroker-data/objects.jsonl 13M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================iobroker@ioBrokerMaster:~ $ ======= Start marking the full check here =========
-bash: =======: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ ```Skript v.2023-04-16
*** BASE SYSTEM ***
Model : Raspberry Pi 4 Model B Rev 1.4
Architecture : aarch64
Docker : false
Virtualization : none
Distributor ID: Debian
Description: Debian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseyePRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"Systemuptime and Load:
12:49:32 up 43 min, 3 users, load average: 1.04, 0.72, 0.66
CPU threads: 4Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=53.5'C
volt=0.9060V*** Time and Time Zones ***
Local time: Wed 2023-08-02 12:49:32 CEST
Universal time: Wed 2023-08-02 10:49:32 UTC
RTC time: n/a
Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no*** User and Groups ***
iobroker
/home/iobroker
iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi*** X-Server-Setup ***
X-Server: true
Desktop:
Terminal: tty
Boot Target: graphical.target*** MEMORY ***
total used free shared buff/cache available
Mem: 7.8G 2.3G 4.6G 35M 945M 5.4G
Swap: 99M 0B 99M
Total: 7.9G 2.3G 4.7G7811 M total memory 2252 M used memory 2492 M active memory 486 M inactive memory 4613 M free memory 93 M buffer memory 852 M swap cache 99 M total swap 0 M used swap 99 M free swapRaspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 1.8T 6.3G 1.8T 1% /
devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev
tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
/dev/sda1 vfat 255M 31M 225M 13% /boot
tmpfs tmpfs 782M 20K 782M 1% /run/user/1000Messages concerning ext4 filesystem in dmesg:
[Wed Aug 2 12:05:54 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B4:7F:C6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=85dbb105-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Wed Aug 2 12:05:58 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Aug 2 12:05:58 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Wed Aug 2 12:06:04 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.Show mounted filesystems (real ones only):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/sda2 ext4 rw,noatime
-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro -bash: Skript: Kommando nicht gefunden. -bash: Bookshelf: Kommando nicht gefunden. -bash: Model: Kommando nicht gefunden. -bash: Architecture: Kommando nicht gefunden. -bash: Docker: Kommando nicht gefunden. -bash: Virtualization: Kommando nicht gefunden. -bash: Distributor: Kommando nicht gefunden. -bash: command substitution: Zeile 10: Syntaxfehler beim unerwarteten Symbol »(« -bash: command substitution: Zeile 10:Description: Debian GNU/Linux 11 (bullseye)'
-bash: -/boot: Datei oder Verzeichnis nicht gefunden
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Files in neuralgic directories:
-bash: Files: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ /var:
-bash: /var:: Datei oder Verzeichnis nicht gefunden
iobroker@ioBrokerMaster:~ $ 766M /var/
-bash: 766M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 392M /var/lib
-bash: 392M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 209M /var/lib/influxdb/engine
-bash: 209M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 209M /var/lib/influxdb
-bash: 209M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 186M /var/lib/influxdb/engine/data
-bash: 186M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Archived and active journals take up 96.0M in the file system.
-bash: Archived: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ /opt/iobroker/backups:
-bash: /opt/iobroker/backups:: Datei oder Verzeichnis nicht gefunden
iobroker@ioBrokerMaster:~ $ 117M /opt/iobroker/backups/
-bash: 117M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ /opt/iobroker/iobroker-data:
-bash: /opt/iobroker/iobroker-data:: Datei oder Verzeichnis nicht gefunden
iobroker@ioBrokerMaster:~ $ 531M /opt/iobroker/iobroker-data/
-bash: 531M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 360M /opt/iobroker/iobroker-data/files
-bash: 360M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 138M /opt/iobroker/iobroker-data/backup-objects
-bash: 138M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 88M /opt/iobroker/iobroker-data/files/echarts.admin
-bash: 88M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 57M /opt/iobroker/iobroker-data/files/echarts
-bash: 57M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ The five largest files in iobroker-data are:
-bash: The: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
-bash: 35M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 23M /opt/iobroker/iobroker-data/objects.jsonl
-bash: 23M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map
-bash: 23M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map
-bash: 23M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map
-bash: 23M: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ *** NodeJS-Installation ***
-bash: Bookshelf: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ /usr/bin/nodejs v18.17.0
node:internal/modules/cjs/loader:1080
throw err;
^Error: Cannot find module '/home/iobroker/v18.17.0'
at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
at Module._load (node:internal/modules/cjs/loader:922:27)
at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
at node:internal/main/run_main_module:23:47 {
code: 'MODULE_NOT_FOUND',
requireStack: []
}Node.js v18.17.0
iobroker@ioBrokerMaster:~ $ /usr/bin/node v18.17.0
node:internal/modules/cjs/loader:1080
throw err;
^Error: Cannot find module '/home/iobroker/v18.17.0'
at Module._resolveFilename (node:internal/modules/cjs/loader:1077:15)
at Module._load (node:internal/modules/cjs/loader:922:27)
at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:81:12)
at node:internal/main/run_main_module:23:47 {
code: 'MODULE_NOT_FOUND',
requireStack: []
}Node.js v18.17.0
iobroker@ioBrokerMaster:~ $ /usr/bin/npm 9.6.7
Unknown command: "9.6.7"To see a list of supported npm commands, run:
npm help
iobroker@ioBrokerMaster:~ $ /usr/bin/npx 9.6.7
npm ERR! code E404
npm ERR! 404 Not Found - GET https://registry.npmjs.org/9.6.7 - Not found
npm ERR! 404
npm ERR! 404 '9.6.7@*' is not in this registry.
npm ERR! 404
npm ERR! 404 Note that you can also install from a
npm ERR! 404 tarball, folder, http url, or git url.npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-08-02T10_57_53_210Z-debug-0.log
iobroker@ioBrokerMaster:~ $
piobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ nodejs:
-bash: nodejs:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Installed: 18.17.0-deb-1nodesource1
-bash: Installed:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Candidate: 18.17.0-deb-1nodesource1
-bash: Candidate:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Version table:
-bash: Version: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ *** 18.17.0-deb-1nodesource1 500
-bash: Bookshelf: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
-bash: 500: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 100 /var/lib/dpkg/status
-bash: 100: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 12.22.12~dfsg-1~deb11u4 500
-bash: 12.22.12~dfsg-1~deb11u4: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
-bash: 500: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 12.22.12~dfsg-1~deb11u3 500
-bash: 12.22.12~dfsg-1~deb11u3: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 500 http://deb.debian.org/debian bullseye/main arm64 Packages
-bash: 500: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
0iobroker@ioBrokerMaster:~ $ Temp directories causing npm8 problem: 0
-bash: Temp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ No problems detected
-bash: No: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ *** ioBroker-Installation ***
-bash: Bookshelf: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
liobroker@ioBrokerMaster:~ $ ioBroker Status
-bash: ioBroker: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ iobroker is running on this host.
iobroker [command]Commands:
iobroker setup Setup ioBroker
iobroker start [all|<adapter>.<instance>] Starts the js-controller or a specified adapter instance
iobroker stop [<adapter>.<instance>] stops the js-controller or a specified adapter instance
iobroker restart [<adapter>.<instance>] Restarts js-controller or a specified adapter instance [aliases: r]
iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance
iobroker info Shows the host info
iobroker logs [<adapter>] Monitor log
iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a]
iobroker install <adapter> Installs a specified adapter [aliases: i]
iobroker rebuild [<module>] Rebuild all native modules or path
iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub
iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete]
iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete]
iobroker update [<repositoryUrl>] Update repository and list adapters
iobroker upgrade Upgrade management
iobroker upload [all|<adapter>] Upload management [aliases: u]
iobroker object Object management [aliases: o]
iobroker state State management [aliases: s]
iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s
iobroker list <type> [<filter>] List all entries, like objects
iobroker chmod <mode> <file> Change file rights
iobroker chown <user> <group> <file> Change file ownership
iobroker touch <file> Touch file
iobroker rm <file> Remove file
iobroker file File management
iobroker user User commands
iobroker group group management
iobroker host <hostname> Set host to given hostname
iobroker set <adapter>.<instance> Change settings of adapter config
iobroker license <license.file or license.text> Update license by given file
iobroker cert Certificate management
iobroker clean <yes> Clears all objects and states
iobroker backup Create backup
iobroker restore <backup name or path> Restore a specified backup
iobroker validate <backup name or path> Validate a specified backup
iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun]
iobroker repo [<name>] Show repo information
iobroker uuid Show uuid of the installation [aliases: id]
iobroker unsetup Reset license, installation secret and language
iobroker fix Execute the installation fixer script, this updates your ioBroker installation
iobroker multihost Multihost management
iobroker compact compact group management
iobroker plugin Plugin management
iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v]Options:
--help Show help [boolean]
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Objects type: jsonl
-bash: Objects: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ States type: jsonl
-bash: States: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ MULTIHOSTSERVICE/enabled: false
-bash: MULTIHOSTSERVICE/enabled:: Datei oder Verzeichnis nicht gefunden
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Core adapters versions
-bash: Core: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ js-controller: 4.0.24
-bash: js-controller:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ admin: 6.6.1
-bash: admin:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ javascript: 7.0.3
-bash: javascript:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Adapters from github: 0
-bash: Adapters: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Adapter State
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10 (SSL), run as: admin
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ + system.adapter.alarm.0 : alarm : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.alias-manager.0 : alias-manager : ioBrokerMaster - disabled
-bash: system.adapter.alias-manager.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.backitup.0 : backitup : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.backitup.1 : backitup : iob-slave1-Nowak-Automatisierung - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.bshb.0 : bshb : ioBrokerMaster - disabled
-bash: system.adapter.bshb.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.device-reminder.0 : device-reminder : ioBrokerMaster - disabled
-bash: system.adapter.device-reminder.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.devices.0 : devices : ioBrokerMaster - disabled
-bash: system.adapter.devices.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.discovery.0 : discovery : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.doorbird.0 : doorbird : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.dwd.0 : dwd : ioBrokerMaster - enabled
-bash: system.adapter.dwd.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.echarts.0 : echarts : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.feiertage.0 : feiertage : ioBrokerMaster - enabled
-bash: system.adapter.feiertage.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.geofency.0 : geofency : ioBrokerMaster - disabled, port: 7999, bind: 0.0.0.0
-bash: system.adapter.geofency.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.growatt.0 : growatt : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.harmony.0 : harmony : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.heatingcontrol.0 : heatingcontrol : ioBrokerMaster - disabled
-bash: system.adapter.heatingcontrol.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.hm-rega.0 : hm-rega : ioBrokerMaster - disabled
-bash: system.adapter.hm-rega.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.hm-rpc.0 : hm-rpc : ioBrokerMaster - disabled, port: 0
-bash: system.adapter.hm-rpc.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.hm-rpc.1 : hm-rpc : ioBrokerMaster - disabled, port: 0
-bash: system.adapter.hm-rpc.1: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.hue.0 : hue : ioBrokerMaster - enabled, port: 443
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.ical.0 : ical : ioBrokerMaster - disabled
-bash: system.adapter.ical.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.influxdb.0 : influxdb : ioBrokerMaster - enabled, port: 8086
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.info.0 : info : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.iot.0 : iot : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.jarvis.0 : jarvis : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.javascript.0 : javascript : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.linkeddevices.0 : linkeddevices : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.luftdaten.0 : luftdaten : ioBrokerMaster - enabled
-bash: system.adapter.luftdaten.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.netatmo.0 : netatmo : ioBrokerMaster - disabled
-bash: system.adapter.netatmo.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.nina.0 : nina : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.odl.0 : odl : ioBrokerMaster - enabled
-bash: system.adapter.odl.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.owfs.0 : owfs : ioBrokerMaster - disabled, port: 4304
-bash: system.adapter.owfs.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.pollenflug.0 : pollenflug : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.pvforecast.0 : pvforecast : ioBrokerMaster - disabled
-bash: system.adapter.pvforecast.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.rpi2.0 : rpi2 : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.rpi2.1 : rpi2 : iob-slave1-Nowak-Automatisierung - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.sayit.0 : sayit : ioBrokerMaster - disabled
-bash: system.adapter.sayit.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.scenes.0 : scenes : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.shuttercontrol.0 : shuttercontrol : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.smartmeter.0 : smartmeter : iob-slave1-Nowak-Automatisierung - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.sonos.0 : sonos : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.sony-bravia.0 : sony-bravia : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.sprinklecontrol.0 : sprinklecontrol : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.statistics.0 : statistics : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.synology.0 : synology : ioBrokerMaster - disabled, port: 5000
-bash: system.adapter.synology.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.tankerkoenig.0 : tankerkoenig : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.tr-064.0 : tr-064 : ioBrokerMaster - disabled
-bash: system.adapter.tr-064.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.unifi.0 : unifi : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.yahka.0 : yahka : ioBrokerMaster - enabled
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ system.adapter.yr.0 : yr : ioBrokerMaster - enabled
-bash: system.adapter.yr.0: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ + instance is alive
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Enabled adapters with bindings
-bash: Enabled: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10 (SSL), run as: admin
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ + system.adapter.hue.0 : hue : ioBrokerMaster - enabled, port: 443
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.influxdb.0 : influxdb : ioBrokerMaster - enabled, port: 8086
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin
-bash: +: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ ioBroker-Repositories
-bash: ioBroker-Repositories: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ stable : http://download.iobroker.net/sources-dist.json
-bash: stable: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ beta : http://download.iobroker.net/sources-dist-latest.json
-bash: beta: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Active repo(s): stable
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ Installed ioBroker-Instances
-bash: Installed: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Used repository: stable
-bash: Used: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "admin" : 6.3.5 , installed 6.6.1
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "alarm" : 3.3.12 , installed 3.3.12
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "alias-manager": 1.2.4 , installed 1.2.4
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "backitup" : 2.6.23 , installed 2.6.23
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "bshb" : 0.2.4 , installed 0.2.4
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "device-reminder": 1.2.9 , installed 1.2.9
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "devices" : 1.1.5 , installed 1.1.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "discovery" : 3.1.0 , installed 3.1.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "doorbird" : 1.0.5 , installed 1.0.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "dwd" : 2.8.5 , installed 2.8.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "echarts" : 1.5.1 , installed 1.5.1
LISTEN 0 14605 572/cupsd
tcp6 -bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "feiertage" : 1.1.0 , installed 1.1.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "geofency" : 1.2.4 , installed 1.2.4
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "growatt" : 3.0.2 , installed 3.0.2
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "harmony" : 1.2.2 , installed 1.2.2
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "heatingcontrol": 2.10.6 , installed 2.10.6
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "hm-rega" : 3.0.46 , installed 3.0.46
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "hm-rpc" : 1.15.18 , installed 1.15.18
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "hue" : 3.9.3 , installed 3.9.3
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "ical" : 1.13.3 , installed 1.13.3
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "influxdb" : 3.2.0 , installed 3.2.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "info" : 1.9.26 , installed 1.9.26
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "iot" : 1.14.5 , installed 1.14.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "jarvis" : 3.1.2 , installed 3.1.2
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "javascript" : 7.0.3 , installed 7.0.3
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Controller "js-controller": 4.0.24 , installed 4.0.24
-bash: Controller: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "linkeddevices": 1.5.5 , installed 1.5.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "luftdaten" : 3.0.0 , installed 3.0.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "netatmo" : 3.1.0 , installed 3.1.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "nina" : 0.0.25 , installed 0.0.25
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "odl" : 2.0.5 , installed 2.0.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "owfs" : 0.7.0 , installed 0.7.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "pollenflug" : 1.0.6 , installed 1.0.6
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "pvforecast" : 2.7.1 , installed 2.7.1
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "rpi2" : 1.3.2 , installed 1.3.2
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "sayit" : 3.0.5 , installed 3.0.5
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "scenes" : 2.3.9 , installed 2.3.9
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "shuttercontrol": 1.5.0 , installed 1.5.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "simple-api" : 2.7.2 , installed 2.7.2
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "smartmeter" : 3.3.4 , installed 3.3.4
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "socketio" : 4.2.0 , installed 4.2.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "sonos" : 2.3.1 , installed 2.3.1
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "sony-bravia" : 1.0.9 , installed 1.0.9
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "sprinklecontrol": 0.2.13 , installed 0.2.13
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "statistics" : 2.3.0 , installed 2.3.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "synology" : 2.1.13 , installed 2.1.13
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "telegram" : 1.16.0 , installed 1.16.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "tr-064" : 4.2.18 , installed 4.2.18
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "unifi" : 0.6.6 , installed 0.6.6
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "web" : 4.3.0 , installed 4.3.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "ws" : 1.3.0 , installed 1.3.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "yahka" : 0.17.0 , installed 0.17.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Adapter "yr" : 5.3.0 , installed 5.3.0
-bash: Adapter: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
:iobroker@ioBrokerMaster:~ $ Objects and States
-bash: Objects: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Please stand by - This may take a while
-bash: Please: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Objects: 13437
-bash: Objects:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ States: 11537
-bash: States:: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ *** OS-Repositories and Updates ***
-bash: Bookshelf: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Hit:1 http://deb.debian.org/debian bullseye InRelease
-bash: Hit:1: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
-bash: Hit:2: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
-bash: Hit:3: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
-bash: Hit:4: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Hit:5 https://repos.influxdata.com/debian bullseye InRelease
-bash: Hit:5: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease
-bash: Hit:6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Reading package lists...
-bash: Reading: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Pending Updates: 1
-bash: Pending: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ *** Listening Ports ***
-bash: Bookshelf: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ Active Internet connections (only servers)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
-bash: Proto: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 172.36.0.10:9001 0.0.0.0:* LISTEN 1000 19620 1301/iobroker.js-co
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 172.36.0.10:9000 0.0.0.0:* LISTEN 1000 19627 1301/iobroker.js-co
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1000 20148 2402/io.jarvis.0
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14587 583/sshd: /usr/sbin
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 127.0.0.1:33917 0.0.0.0:* LISTEN 1000 22669 3113/io.yahka.0
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 172.36.0.10:8100 0.0.0.0:* LISTEN 1000 18939 2211/io.doorbird.0
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 172.36.0.10:8081 0.0.0.0:* LISTEN 1000 20598 1901/io.admin.0
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 14605 572/cupsd
-bash: tcp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 :::61991 :::* LISTEN 1000 19027 2288/io.harmony.0
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 :::22 :::* LISTEN 0 14589 583/sshd: /usr/sbin
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 :::32841 :::* LISTEN 1000 21472 3113/io.yahka.0
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 ::1:631 :::* LISTEN 0 14604 572/cupsd
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 :::8082 :::* LISTEN 1000 22647 3098/io.web.0
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 :::8086 :::* LISTEN 999 17164 462/influxd
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ tcp6 0 0 :::3500 :::* LISTEN 1000 20891 2092/io.sonos.0
-bash: tcp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13790 456/dhcpcd
-bash: udp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp 0 0 0.0.0.0:61991 0.0.0.0:* 1000 19028 2288/io.harmony.0
-bash: udp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp 0 0 0.0.0.0:631 0.0.0.0:* 0 15687 607/cups-browsed
-bash: udp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp 0 0 0.0.0.0:50295 0.0.0.0:* 108 13757 380/avahi-daemon: r
-bash: udp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13755 380/avahi-daemon: r
-bash: udp: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp6 0 0 :::40019 :::* 108 13758 380/avahi-daemon: r
-bash: udp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp6 0 0 :::546 :::* 0 16422 456/dhcpcd
-bash: udp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ udp6 0 0 :::5353 :::* 108 13756 380/avahi-daemon: r
-bash: udp6: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ *** Log File - Last 25 Lines ***
-bash: Bookshelf: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:09:17.111 - warn: tankerkoenig.0 (3071) Overrides is missing in config from station Esso Tankstelle. Please check your configuration or reconfigure the stations => edit station => save
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:09:20.444 - info: host.ioBrokerMaster instance system.adapter.yahka.0 started with pid 3113
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:10:00.306 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 3181
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:10:06.743 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:15:00.275 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 3536
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:15:06.898 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:20:00.313 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 3908
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:20:06.935 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:25:00.261 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 4263
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:25:06.797 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:30:00.250 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 4618
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:30:04.309 - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 started with pid 4633
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:30:07.519 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:30:14.279 - warn: luftdaten.0 (4633) State "luftdaten.0.38240.timestamp" has no existing object, this might lead to an error in future versions
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:30:14.869 - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:35:00.229 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 5007
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:35:06.628 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:40:00.194 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 5351
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:40:06.759 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:40:34.074 - info: host.ioBrokerMaster instance system.adapter.odl.0 started with pid 5369
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:40:40.108 - info: host.ioBrokerMaster instance system.adapter.odl.0 terminated with code 0 (NO_ERROR)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:45:00.232 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 5729
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:45:07.300 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:50:00.068 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 7529
-bash: 2023-08-02: Kommando nicht gefunden.
iobroker@ioBrokerMaster:~ $ 2023-08-02 12:50:07.158 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
-bash: Syntaxfehler beim unerwarteten Symbol »(«
iobroker@ioBrokerMaster:~ $
iobroker@ioBrokerMaster:~ $ ```============ Mark until here for C&P =============
iob diag has finished.
)viele Grüße
Markus -
Hallo,
keiner eine Idee.
Bin mal von RaspberryMatic auf PIVCCU aber das brach auch kein Erfolg.Grüße
Markus -
Hallo,
keiner eine Idee.
Bin mal von RaspberryMatic auf PIVCCU aber das brach auch kein Erfolg.Grüße
Markus@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
keiner eine Idee
Wie soll man denn diesen Kauderwelsch vernünftig lesen ?
Texte kommen hier in Codetags rein siehe:
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge
-
@djmarc75 Super vielen lieben Dank für den Hinweis.
-
@djmarc75 Super vielen lieben Dank für den Hinweis.
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
vielen lieben Dank für den Hinweis
Dann setz das Ganze bitte nochmals hier in Codetags ein ;)
Dann bekommst Du sicher schneller Hilfe -
@djmarc75 Super vielen lieben Dank für den Hinweis.
iobroker status //nicht Status -
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
vielen lieben Dank für den Hinweis
Dann setz das Ganze bitte nochmals hier in Codetags ein ;)
Dann bekommst Du sicher schneller Hilfe@djmarc75 Hallo DJMarc75 hier in Codetags :+1:
Auch von mir ein Hallo in die Runde,
ich habe ein änliches problem, es wird alles synchronisiert bis auf die Objekt-Namen. Ich habe schon mehrere Neuinstallationen von ioBroker, CCU, hm-rpc, hm-rega.
Das Problem tauchte aber erst nach einem Backup auf ein neu installiertes 64Bit System und das iobroker Backup war von dem 32Bit System.
Bekomme immer diese Fehlermeldung.
Kann mir bitte jemand weiter helfen, ich habe keine Idee mehr?
ioBroker:
Plattform: linux
Betriebssystem: linux
Architektur: arm64
CPUs: 4
Geschwindigkeit: 1800 MHz
Modell: Cortex-A72
RAM: 7.6 GB
System-Betriebszeit: 00:04:18
Node.js: v18.17.0
time: 1690967161861
Adapter-Anzahl: 485
NPM: 9.6.7
Datenträgergröße: 1833.6 GB
Freier Festplattenspeicher: 1827.3 GB
Betriebszeit: 00:03:15iob diag
======== Start marking the full check here ========= Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 17:35:31 up 1:14, 3 users, load average: 0.54, 0.72, 0.64 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=53.0'C volt=0.9060V *** Time and Time Zones *** Local time: Wed 2023-08-02 17:35:31 CEST Universal time: Wed 2023-08-02 15:35:31 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** iobroker /home/iobroker iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 2.5G 4.3G 35M 968M 5.1G Swap: 99M 0B 99M Total: 7.9G 2.5G 4.4G 7811 M total memory 2522 M used memory 2759 M active memory 507 M inactive memory 4320 M free memory 97 M buffer memory 871 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 1.8T 6.3G 1.8T 1% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 782M 20K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Aug 2 16:20:58 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B4:7F:C6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=85dbb105-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Wed Aug 2 16:21:02 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Aug 2 16:21:02 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Wed Aug 2 16:21:08 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 766M /var/ 392M /var/lib 208M /var/lib/influxdb/engine 208M /var/lib/influxdb 199M /var/lib/influxdb/engine/data/2d0dd83dd19d7bdf/autogen Archived and active journals take up 96.0M in the file system. /opt/iobroker/backups: 128M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 546M /opt/iobroker/iobroker-data/ 360M /opt/iobroker/iobroker-data/files 138M /opt/iobroker/iobroker-data/backup-objects 88M /opt/iobroker/iobroker-data/files/echarts.admin 57M /opt/iobroker/iobroker-data/files/echarts The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 32M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.0 /usr/bin/node v18.17.0 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.0-deb-1nodesource1 Candidate: 18.17.0-deb-1nodesource1 Version table: *** 18.17.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.6.1 javascript: 7.0.3 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10, run as: admin + system.adapter.alarm.0 : alarm : ioBrokerMaster - enabled system.adapter.alias-manager.0 : alias-manager : ioBrokerMaster - disabled + system.adapter.backitup.0 : backitup : ioBrokerMaster - enabled + system.adapter.backitup.1 : backitup : iob-slave1-Nowak-Automatisierung - enabled system.adapter.bshb.0 : bshb : ioBrokerMaster - disabled system.adapter.device-reminder.0 : device-reminder : ioBrokerMaster - disabled system.adapter.devices.0 : devices : ioBrokerMaster - disabled + system.adapter.discovery.0 : discovery : ioBrokerMaster - enabled + system.adapter.doorbird.0 : doorbird : ioBrokerMaster - enabled system.adapter.dwd.0 : dwd : ioBrokerMaster - enabled + system.adapter.echarts.0 : echarts : ioBrokerMaster - enabled system.adapter.feiertage.0 : feiertage : ioBrokerMaster - enabled system.adapter.geofency.0 : geofency : ioBrokerMaster - disabled, port: 7999, bind: 0.0.0.0 + system.adapter.growatt.0 : growatt : ioBrokerMaster - enabled + system.adapter.harmony.0 : harmony : ioBrokerMaster - enabled system.adapter.heatingcontrol.0 : heatingcontrol : ioBrokerMaster - disabled + system.adapter.hm-rega.0 : hm-rega : ioBrokerMaster - enabled + system.adapter.hm-rpc.0 : hm-rpc : ioBrokerMaster - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBrokerMaster - enabled, port: 0 + system.adapter.hue.0 : hue : ioBrokerMaster - enabled, port: 443 system.adapter.ical.0 : ical : ioBrokerMaster - disabled + system.adapter.influxdb.0 : influxdb : ioBrokerMaster - enabled, port: 8086 + system.adapter.info.0 : info : ioBrokerMaster - enabled + system.adapter.iot.0 : iot : ioBrokerMaster - enabled + system.adapter.jarvis.0 : jarvis : ioBrokerMaster - enabled + system.adapter.javascript.0 : javascript : ioBrokerMaster - enabled + system.adapter.linkeddevices.0 : linkeddevices : ioBrokerMaster - enabled system.adapter.luftdaten.0 : luftdaten : ioBrokerMaster - enabled system.adapter.netatmo.0 : netatmo : ioBrokerMaster - disabled + system.adapter.nina.0 : nina : ioBrokerMaster - enabled system.adapter.odl.0 : odl : ioBrokerMaster - enabled system.adapter.owfs.0 : owfs : ioBrokerMaster - disabled, port: 4304 + system.adapter.pollenflug.0 : pollenflug : ioBrokerMaster - enabled system.adapter.pvforecast.0 : pvforecast : ioBrokerMaster - disabled + system.adapter.rpi2.0 : rpi2 : ioBrokerMaster - enabled + system.adapter.rpi2.1 : rpi2 : iob-slave1-Nowak-Automatisierung - enabled system.adapter.sayit.0 : sayit : ioBrokerMaster - disabled + system.adapter.scenes.0 : scenes : ioBrokerMaster - enabled + system.adapter.shuttercontrol.0 : shuttercontrol : ioBrokerMaster - enabled + system.adapter.smartmeter.0 : smartmeter : iob-slave1-Nowak-Automatisierung - enabled + system.adapter.sonos.0 : sonos : ioBrokerMaster - enabled + system.adapter.sony-bravia.0 : sony-bravia : ioBrokerMaster - enabled + system.adapter.sprinklecontrol.0 : sprinklecontrol : ioBrokerMaster - enabled + system.adapter.statistics.0 : statistics : ioBrokerMaster - enabled system.adapter.synology.0 : synology : ioBrokerMaster - disabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : ioBrokerMaster - enabled + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tr-064.0 : tr-064 : ioBrokerMaster - disabled + system.adapter.unifi.0 : unifi : ioBrokerMaster - enabled + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : ioBrokerMaster - enabled system.adapter.yr.0 : yr : ioBrokerMaster - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : ioBrokerMaster - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBrokerMaster - enabled, port: 0 + system.adapter.hue.0 : hue : ioBrokerMaster - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : ioBrokerMaster - enabled, port: 8086 + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.6.1 Adapter "alarm" : 3.3.12 , installed 3.3.12 Adapter "alias-manager": 1.2.4 , installed 1.2.4 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "bshb" : 0.2.4 , installed 0.2.4 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "doorbird" : 1.0.5 , installed 1.0.5 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "growatt" : 3.0.2 , installed 3.0.2 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "heatingcontrol": 2.10.6 , installed 2.10.6 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.18 , installed 1.15.18 Adapter "hue" : 3.9.3 , installed 3.9.3 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "jarvis" : 3.1.2 , installed 3.1.2 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "linkeddevices": 1.5.5 , installed 1.5.5 Adapter "luftdaten" : 3.0.0 , installed 3.0.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "odl" : 2.0.5 , installed 2.0.5 Adapter "owfs" : 0.7.0 , installed 0.7.0 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "pvforecast" : 2.7.1 , installed 2.7.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shuttercontrol": 1.5.0 , installed 1.5.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sonos" : 2.3.1 , installed 2.3.1 Adapter "sony-bravia" : 1.0.9 , installed 1.0.9 Adapter "sprinklecontrol": 0.2.13 , installed 0.2.13 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "unifi" : 0.6.6 , installed 0.6.6 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yahka" : 0.17.0 , installed 0.17.0 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 21538 States: 18501 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://security.debian.org/debian-security bullseye-security InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Hit:6 https://repos.influxdata.com/debian bullseye InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 172.36.0.10:8081 0.0.0.0:* LISTEN 1000 17099 1873/io.admin.0 tcp 0 0 172.36.0.10:8100 0.0.0.0:* LISTEN 1000 19677 2222/io.doorbird.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15410 553/cupsd tcp 0 0 127.0.0.1:33633 0.0.0.0:* LISTEN 1000 22964 2974/io.yahka.0 tcp 0 0 172.36.0.10:9000 0.0.0.0:* LISTEN 1000 18846 680/iobroker.js-con tcp 0 0 172.36.0.10:9001 0.0.0.0:* LISTEN 1000 18725 680/iobroker.js-con tcp 0 0 0.0.0.0:42001 0.0.0.0:* LISTEN 1000 18222 2149/io.hm-rpc.1 tcp 0 0 0.0.0.0:42010 0.0.0.0:* LISTEN 1000 19586 2133/io.hm-rpc.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11878 585/sshd: /usr/sbin tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1000 20703 2409/io.jarvis.0 tcp6 0 0 :::8086 :::* LISTEN 999 13075 462/influxd tcp6 0 0 :::8082 :::* LISTEN 1000 22845 2967/io.web.0 tcp6 0 0 :::3500 :::* LISTEN 1000 19181 2072/io.sonos.0 tcp6 0 0 ::1:631 :::* LISTEN 0 15409 553/cupsd tcp6 0 0 :::61991 :::* LISTEN 1000 20583 2355/io.harmony.0 tcp6 0 0 :::22 :::* LISTEN 0 11880 585/sshd: /usr/sbin tcp6 0 0 :::41159 :::* LISTEN 1000 20441 2974/io.yahka.0 udp 0 0 0.0.0.0:43281 0.0.0.0:* 108 2032 403/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 11930 475/dhcpcd udp 0 0 0.0.0.0:61991 0.0.0.0:* 1000 20584 2355/io.harmony.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 14949 609/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 2030 403/avahi-daemon: r udp6 0 0 :::546 :::* 0 12024 475/dhcpcd udp6 0 0 :::58029 :::* 108 2033 403/avahi-daemon: r udp6 0 0 :::5353 :::* 108 2031 403/avahi-daemon: r *** Log File - Last 25 Lines *** "000A9D89B93E49:1":{"Name":"Buero_Wandthermostat%3A1","Interface":"HmIP-RF"}, "000A9D89B93E49:2":{"Name":"Buero_Wandthermostat%3A2","Interface":"HmIP-RF"}, "000A9D89B93E49:3":{"Name":"Buero_Wandthermostat%3A3","Interface":"HmIP-RF"}, "000A9D89B93E49:4":{"Name":"Buero_Wandthermostat%3A4","Interface":"HmIP-RF"}, "000A9D89B93E49:5":{"Name":"Buero_Wandthermostat%3A5","Interface":"HmIP-RF"}, "000A9D89B93E49:6":{"Name":"Buero_Wandthermostat%3A6","Interface":"HmIP-RF"}, "000A9D89B93E49:7":{"Name":"Buero_Wandthermostat%3A7","Interface":"HmIP-RF"}, "OEQ1019551":{"Name":"Carport_Bewegungsmelder","Interface":"BidCos-RF"}, "OEQ1019551:0":{"Name":"Carport_Bewegungsmelder%3A0","Interface":"BidCos-RF"}, "OEQ1019551:1":{"Name":"10_Carport_Bewegungsmelder_Einfahrt%3A1","Interface":"BidCos-RF"}, "OEQ1019551:2":{"Name":"10_Carport_Bewegungsmelder_Hof%3A2","Interface":"BidCos-RF"}, "OEQ1019551:3":{"Name":"10_Carport_frei%3A3","Interface":"BidCos-RF"}, "OEQ2264080":{"Name":"Carport_Licht_SD","Interface":"BidCos-RF"}, "OEQ2264080:0":{"Name":"Carport_Licht_SD%3A0","Interface":"BidCos-RF"}, "OEQ2264080:1":{"Name":"20_Carport_Beleuchtung%3A1","Interface":"BidCos-RF"}, "OEQ2264080:2":{"Name":"20_Carport_SD%3A2","Interface":"BidCos-RF"} 2023-08-02 17:25:00.335 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 8749 2023-08-02 17:25:07.379 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 17:30:00.313 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 10675 2023-08-02 17:30:04.363 - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 started with pid 10690 2023-08-02 17:30:09.045 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 17:30:15.019 - warn: luftdaten.0 (10690) State "luftdaten.0.38240.timestamp" has no existing object, this might lead to an error in future versions 2023-08-02 17:30:15.654 - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR) 2023-08-02 17:35:00.359 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 11975 2023-08-02 17:35:07.726 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) ============ Mark until here for C&P ============= iob diag has finished. Press any key for a summary Copy text starting here: ======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Debian GNU/Linux 11 (bullseye) Kernel: 6.1.21-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: 1 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.17.0 /usr/bin/node v18.17.0 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 7.8G 2.5G 4.3G 35M 972M 5.1G Swap: 99M 0B 99M Total: 7.9G 2.5G 4.4G Active iob-Instances: 37 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.6.1 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10, run as: admin + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 21538 States: 18502 Size of iob-Database: 32M /opt/iobroker/iobroker-data/objects.jsonl 20M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================Grüße
Markus -
@djmarc75 Hallo DJMarc75 hier in Codetags :+1:
Auch von mir ein Hallo in die Runde,
ich habe ein änliches problem, es wird alles synchronisiert bis auf die Objekt-Namen. Ich habe schon mehrere Neuinstallationen von ioBroker, CCU, hm-rpc, hm-rega.Das Problem tauchte aber erst nach einem Backup auf ein neu installiertes 64Bit System und das iobroker Backup war von dem 32Bit System.
Bekomme immer diese Fehlermeldung.
Kann mir bitte jemand weiter helfen, ich habe keine Idee mehr?
ioBroker:
Plattform: linux
Betriebssystem: linux
Architektur: arm64
CPUs: 4
Geschwindigkeit: 1800 MHz
Modell: Cortex-A72
RAM: 7.6 GB
System-Betriebszeit: 00:04:18
Node.js: v18.17.0
time: 1690967161861
Adapter-Anzahl: 485
NPM: 9.6.7
Datenträgergröße: 1833.6 GB
Freier Festplattenspeicher: 1827.3 GB
Betriebszeit: 00:03:15iob diag
======== Start marking the full check here ========= Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 17:35:31 up 1:14, 3 users, load average: 0.54, 0.72, 0.64 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=53.0'C volt=0.9060V *** Time and Time Zones *** Local time: Wed 2023-08-02 17:35:31 CEST Universal time: Wed 2023-08-02 15:35:31 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** iobroker /home/iobroker iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 2.5G 4.3G 35M 968M 5.1G Swap: 99M 0B 99M Total: 7.9G 2.5G 4.4G 7811 M total memory 2522 M used memory 2759 M active memory 507 M inactive memory 4320 M free memory 97 M buffer memory 871 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 1.8T 6.3G 1.8T 1% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 782M 20K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Aug 2 16:20:58 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B4:7F:C6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=85dbb105-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Wed Aug 2 16:21:02 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Aug 2 16:21:02 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Wed Aug 2 16:21:08 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 766M /var/ 392M /var/lib 208M /var/lib/influxdb/engine 208M /var/lib/influxdb 199M /var/lib/influxdb/engine/data/2d0dd83dd19d7bdf/autogen Archived and active journals take up 96.0M in the file system. /opt/iobroker/backups: 128M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 546M /opt/iobroker/iobroker-data/ 360M /opt/iobroker/iobroker-data/files 138M /opt/iobroker/iobroker-data/backup-objects 88M /opt/iobroker/iobroker-data/files/echarts.admin 57M /opt/iobroker/iobroker-data/files/echarts The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 32M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.0 /usr/bin/node v18.17.0 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.0-deb-1nodesource1 Candidate: 18.17.0-deb-1nodesource1 Version table: *** 18.17.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.6.1 javascript: 7.0.3 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10, run as: admin + system.adapter.alarm.0 : alarm : ioBrokerMaster - enabled system.adapter.alias-manager.0 : alias-manager : ioBrokerMaster - disabled + system.adapter.backitup.0 : backitup : ioBrokerMaster - enabled + system.adapter.backitup.1 : backitup : iob-slave1-Nowak-Automatisierung - enabled system.adapter.bshb.0 : bshb : ioBrokerMaster - disabled system.adapter.device-reminder.0 : device-reminder : ioBrokerMaster - disabled system.adapter.devices.0 : devices : ioBrokerMaster - disabled + system.adapter.discovery.0 : discovery : ioBrokerMaster - enabled + system.adapter.doorbird.0 : doorbird : ioBrokerMaster - enabled system.adapter.dwd.0 : dwd : ioBrokerMaster - enabled + system.adapter.echarts.0 : echarts : ioBrokerMaster - enabled system.adapter.feiertage.0 : feiertage : ioBrokerMaster - enabled system.adapter.geofency.0 : geofency : ioBrokerMaster - disabled, port: 7999, bind: 0.0.0.0 + system.adapter.growatt.0 : growatt : ioBrokerMaster - enabled + system.adapter.harmony.0 : harmony : ioBrokerMaster - enabled system.adapter.heatingcontrol.0 : heatingcontrol : ioBrokerMaster - disabled + system.adapter.hm-rega.0 : hm-rega : ioBrokerMaster - enabled + system.adapter.hm-rpc.0 : hm-rpc : ioBrokerMaster - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBrokerMaster - enabled, port: 0 + system.adapter.hue.0 : hue : ioBrokerMaster - enabled, port: 443 system.adapter.ical.0 : ical : ioBrokerMaster - disabled + system.adapter.influxdb.0 : influxdb : ioBrokerMaster - enabled, port: 8086 + system.adapter.info.0 : info : ioBrokerMaster - enabled + system.adapter.iot.0 : iot : ioBrokerMaster - enabled + system.adapter.jarvis.0 : jarvis : ioBrokerMaster - enabled + system.adapter.javascript.0 : javascript : ioBrokerMaster - enabled + system.adapter.linkeddevices.0 : linkeddevices : ioBrokerMaster - enabled system.adapter.luftdaten.0 : luftdaten : ioBrokerMaster - enabled system.adapter.netatmo.0 : netatmo : ioBrokerMaster - disabled + system.adapter.nina.0 : nina : ioBrokerMaster - enabled system.adapter.odl.0 : odl : ioBrokerMaster - enabled system.adapter.owfs.0 : owfs : ioBrokerMaster - disabled, port: 4304 + system.adapter.pollenflug.0 : pollenflug : ioBrokerMaster - enabled system.adapter.pvforecast.0 : pvforecast : ioBrokerMaster - disabled + system.adapter.rpi2.0 : rpi2 : ioBrokerMaster - enabled + system.adapter.rpi2.1 : rpi2 : iob-slave1-Nowak-Automatisierung - enabled system.adapter.sayit.0 : sayit : ioBrokerMaster - disabled + system.adapter.scenes.0 : scenes : ioBrokerMaster - enabled + system.adapter.shuttercontrol.0 : shuttercontrol : ioBrokerMaster - enabled + system.adapter.smartmeter.0 : smartmeter : iob-slave1-Nowak-Automatisierung - enabled + system.adapter.sonos.0 : sonos : ioBrokerMaster - enabled + system.adapter.sony-bravia.0 : sony-bravia : ioBrokerMaster - enabled + system.adapter.sprinklecontrol.0 : sprinklecontrol : ioBrokerMaster - enabled + system.adapter.statistics.0 : statistics : ioBrokerMaster - enabled system.adapter.synology.0 : synology : ioBrokerMaster - disabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : ioBrokerMaster - enabled + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tr-064.0 : tr-064 : ioBrokerMaster - disabled + system.adapter.unifi.0 : unifi : ioBrokerMaster - enabled + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : ioBrokerMaster - enabled system.adapter.yr.0 : yr : ioBrokerMaster - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : ioBrokerMaster - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBrokerMaster - enabled, port: 0 + system.adapter.hue.0 : hue : ioBrokerMaster - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : ioBrokerMaster - enabled, port: 8086 + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.6.1 Adapter "alarm" : 3.3.12 , installed 3.3.12 Adapter "alias-manager": 1.2.4 , installed 1.2.4 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "bshb" : 0.2.4 , installed 0.2.4 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "doorbird" : 1.0.5 , installed 1.0.5 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "growatt" : 3.0.2 , installed 3.0.2 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "heatingcontrol": 2.10.6 , installed 2.10.6 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.18 , installed 1.15.18 Adapter "hue" : 3.9.3 , installed 3.9.3 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "jarvis" : 3.1.2 , installed 3.1.2 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "linkeddevices": 1.5.5 , installed 1.5.5 Adapter "luftdaten" : 3.0.0 , installed 3.0.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "odl" : 2.0.5 , installed 2.0.5 Adapter "owfs" : 0.7.0 , installed 0.7.0 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "pvforecast" : 2.7.1 , installed 2.7.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shuttercontrol": 1.5.0 , installed 1.5.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sonos" : 2.3.1 , installed 2.3.1 Adapter "sony-bravia" : 1.0.9 , installed 1.0.9 Adapter "sprinklecontrol": 0.2.13 , installed 0.2.13 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "unifi" : 0.6.6 , installed 0.6.6 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yahka" : 0.17.0 , installed 0.17.0 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 21538 States: 18501 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://security.debian.org/debian-security bullseye-security InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Hit:6 https://repos.influxdata.com/debian bullseye InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 172.36.0.10:8081 0.0.0.0:* LISTEN 1000 17099 1873/io.admin.0 tcp 0 0 172.36.0.10:8100 0.0.0.0:* LISTEN 1000 19677 2222/io.doorbird.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15410 553/cupsd tcp 0 0 127.0.0.1:33633 0.0.0.0:* LISTEN 1000 22964 2974/io.yahka.0 tcp 0 0 172.36.0.10:9000 0.0.0.0:* LISTEN 1000 18846 680/iobroker.js-con tcp 0 0 172.36.0.10:9001 0.0.0.0:* LISTEN 1000 18725 680/iobroker.js-con tcp 0 0 0.0.0.0:42001 0.0.0.0:* LISTEN 1000 18222 2149/io.hm-rpc.1 tcp 0 0 0.0.0.0:42010 0.0.0.0:* LISTEN 1000 19586 2133/io.hm-rpc.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11878 585/sshd: /usr/sbin tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1000 20703 2409/io.jarvis.0 tcp6 0 0 :::8086 :::* LISTEN 999 13075 462/influxd tcp6 0 0 :::8082 :::* LISTEN 1000 22845 2967/io.web.0 tcp6 0 0 :::3500 :::* LISTEN 1000 19181 2072/io.sonos.0 tcp6 0 0 ::1:631 :::* LISTEN 0 15409 553/cupsd tcp6 0 0 :::61991 :::* LISTEN 1000 20583 2355/io.harmony.0 tcp6 0 0 :::22 :::* LISTEN 0 11880 585/sshd: /usr/sbin tcp6 0 0 :::41159 :::* LISTEN 1000 20441 2974/io.yahka.0 udp 0 0 0.0.0.0:43281 0.0.0.0:* 108 2032 403/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 11930 475/dhcpcd udp 0 0 0.0.0.0:61991 0.0.0.0:* 1000 20584 2355/io.harmony.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 14949 609/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 2030 403/avahi-daemon: r udp6 0 0 :::546 :::* 0 12024 475/dhcpcd udp6 0 0 :::58029 :::* 108 2033 403/avahi-daemon: r udp6 0 0 :::5353 :::* 108 2031 403/avahi-daemon: r *** Log File - Last 25 Lines *** "000A9D89B93E49:1":{"Name":"Buero_Wandthermostat%3A1","Interface":"HmIP-RF"}, "000A9D89B93E49:2":{"Name":"Buero_Wandthermostat%3A2","Interface":"HmIP-RF"}, "000A9D89B93E49:3":{"Name":"Buero_Wandthermostat%3A3","Interface":"HmIP-RF"}, "000A9D89B93E49:4":{"Name":"Buero_Wandthermostat%3A4","Interface":"HmIP-RF"}, "000A9D89B93E49:5":{"Name":"Buero_Wandthermostat%3A5","Interface":"HmIP-RF"}, "000A9D89B93E49:6":{"Name":"Buero_Wandthermostat%3A6","Interface":"HmIP-RF"}, "000A9D89B93E49:7":{"Name":"Buero_Wandthermostat%3A7","Interface":"HmIP-RF"}, "OEQ1019551":{"Name":"Carport_Bewegungsmelder","Interface":"BidCos-RF"}, "OEQ1019551:0":{"Name":"Carport_Bewegungsmelder%3A0","Interface":"BidCos-RF"}, "OEQ1019551:1":{"Name":"10_Carport_Bewegungsmelder_Einfahrt%3A1","Interface":"BidCos-RF"}, "OEQ1019551:2":{"Name":"10_Carport_Bewegungsmelder_Hof%3A2","Interface":"BidCos-RF"}, "OEQ1019551:3":{"Name":"10_Carport_frei%3A3","Interface":"BidCos-RF"}, "OEQ2264080":{"Name":"Carport_Licht_SD","Interface":"BidCos-RF"}, "OEQ2264080:0":{"Name":"Carport_Licht_SD%3A0","Interface":"BidCos-RF"}, "OEQ2264080:1":{"Name":"20_Carport_Beleuchtung%3A1","Interface":"BidCos-RF"}, "OEQ2264080:2":{"Name":"20_Carport_SD%3A2","Interface":"BidCos-RF"} 2023-08-02 17:25:00.335 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 8749 2023-08-02 17:25:07.379 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 17:30:00.313 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 10675 2023-08-02 17:30:04.363 - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 started with pid 10690 2023-08-02 17:30:09.045 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 17:30:15.019 - warn: luftdaten.0 (10690) State "luftdaten.0.38240.timestamp" has no existing object, this might lead to an error in future versions 2023-08-02 17:30:15.654 - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR) 2023-08-02 17:35:00.359 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 11975 2023-08-02 17:35:07.726 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) ============ Mark until here for C&P ============= iob diag has finished. Press any key for a summary Copy text starting here: ======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Debian GNU/Linux 11 (bullseye) Kernel: 6.1.21-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: 1 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.17.0 /usr/bin/node v18.17.0 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 7.8G 2.5G 4.3G 35M 972M 5.1G Swap: 99M 0B 99M Total: 7.9G 2.5G 4.4G Active iob-Instances: 37 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.6.1 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10, run as: admin + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 21538 States: 18502 Size of iob-Database: 32M /opt/iobroker/iobroker-data/objects.jsonl 20M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================Grüße
Markus@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
hier in Codetags
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
Bekomme immer diese Fehlermeldung.
wo sind da code-tags?
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1Außerdem kommt es mir vor als hätte ich das alles schon irgendwo gesehen.
-
@djmarc75 Hallo DJMarc75 hier in Codetags :+1:
Auch von mir ein Hallo in die Runde,
ich habe ein änliches problem, es wird alles synchronisiert bis auf die Objekt-Namen. Ich habe schon mehrere Neuinstallationen von ioBroker, CCU, hm-rpc, hm-rega.Das Problem tauchte aber erst nach einem Backup auf ein neu installiertes 64Bit System und das iobroker Backup war von dem 32Bit System.
Bekomme immer diese Fehlermeldung.
Kann mir bitte jemand weiter helfen, ich habe keine Idee mehr?
ioBroker:
Plattform: linux
Betriebssystem: linux
Architektur: arm64
CPUs: 4
Geschwindigkeit: 1800 MHz
Modell: Cortex-A72
RAM: 7.6 GB
System-Betriebszeit: 00:04:18
Node.js: v18.17.0
time: 1690967161861
Adapter-Anzahl: 485
NPM: 9.6.7
Datenträgergröße: 1833.6 GB
Freier Festplattenspeicher: 1827.3 GB
Betriebszeit: 00:03:15iob diag
======== Start marking the full check here ========= Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 17:35:31 up 1:14, 3 users, load average: 0.54, 0.72, 0.64 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=53.0'C volt=0.9060V *** Time and Time Zones *** Local time: Wed 2023-08-02 17:35:31 CEST Universal time: Wed 2023-08-02 15:35:31 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** iobroker /home/iobroker iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi *** X-Server-Setup *** X-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 2.5G 4.3G 35M 968M 5.1G Swap: 99M 0B 99M Total: 7.9G 2.5G 4.4G 7811 M total memory 2522 M used memory 2759 M active memory 507 M inactive memory 4320 M free memory 97 M buffer memory 871 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 1.8T 6.3G 1.8T 1% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 782M 20K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Aug 2 16:20:58 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:B4:7F:C6 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=85dbb105-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Wed Aug 2 16:21:02 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Aug 2 16:21:02 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Wed Aug 2 16:21:08 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 766M /var/ 392M /var/lib 208M /var/lib/influxdb/engine 208M /var/lib/influxdb 199M /var/lib/influxdb/engine/data/2d0dd83dd19d7bdf/autogen Archived and active journals take up 96.0M in the file system. /opt/iobroker/backups: 128M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 546M /opt/iobroker/iobroker-data/ 360M /opt/iobroker/iobroker-data/files 138M /opt/iobroker/iobroker-data/backup-objects 88M /opt/iobroker/iobroker-data/files/echarts.admin 57M /opt/iobroker/iobroker-data/files/echarts The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 32M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.eb0afecd.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.0 /usr/bin/node v18.17.0 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.0-deb-1nodesource1 Candidate: 18.17.0-deb-1nodesource1 Version table: *** 18.17.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.6.1 javascript: 7.0.3 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10, run as: admin + system.adapter.alarm.0 : alarm : ioBrokerMaster - enabled system.adapter.alias-manager.0 : alias-manager : ioBrokerMaster - disabled + system.adapter.backitup.0 : backitup : ioBrokerMaster - enabled + system.adapter.backitup.1 : backitup : iob-slave1-Nowak-Automatisierung - enabled system.adapter.bshb.0 : bshb : ioBrokerMaster - disabled system.adapter.device-reminder.0 : device-reminder : ioBrokerMaster - disabled system.adapter.devices.0 : devices : ioBrokerMaster - disabled + system.adapter.discovery.0 : discovery : ioBrokerMaster - enabled + system.adapter.doorbird.0 : doorbird : ioBrokerMaster - enabled system.adapter.dwd.0 : dwd : ioBrokerMaster - enabled + system.adapter.echarts.0 : echarts : ioBrokerMaster - enabled system.adapter.feiertage.0 : feiertage : ioBrokerMaster - enabled system.adapter.geofency.0 : geofency : ioBrokerMaster - disabled, port: 7999, bind: 0.0.0.0 + system.adapter.growatt.0 : growatt : ioBrokerMaster - enabled + system.adapter.harmony.0 : harmony : ioBrokerMaster - enabled system.adapter.heatingcontrol.0 : heatingcontrol : ioBrokerMaster - disabled + system.adapter.hm-rega.0 : hm-rega : ioBrokerMaster - enabled + system.adapter.hm-rpc.0 : hm-rpc : ioBrokerMaster - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBrokerMaster - enabled, port: 0 + system.adapter.hue.0 : hue : ioBrokerMaster - enabled, port: 443 system.adapter.ical.0 : ical : ioBrokerMaster - disabled + system.adapter.influxdb.0 : influxdb : ioBrokerMaster - enabled, port: 8086 + system.adapter.info.0 : info : ioBrokerMaster - enabled + system.adapter.iot.0 : iot : ioBrokerMaster - enabled + system.adapter.jarvis.0 : jarvis : ioBrokerMaster - enabled + system.adapter.javascript.0 : javascript : ioBrokerMaster - enabled + system.adapter.linkeddevices.0 : linkeddevices : ioBrokerMaster - enabled system.adapter.luftdaten.0 : luftdaten : ioBrokerMaster - enabled system.adapter.netatmo.0 : netatmo : ioBrokerMaster - disabled + system.adapter.nina.0 : nina : ioBrokerMaster - enabled system.adapter.odl.0 : odl : ioBrokerMaster - enabled system.adapter.owfs.0 : owfs : ioBrokerMaster - disabled, port: 4304 + system.adapter.pollenflug.0 : pollenflug : ioBrokerMaster - enabled system.adapter.pvforecast.0 : pvforecast : ioBrokerMaster - disabled + system.adapter.rpi2.0 : rpi2 : ioBrokerMaster - enabled + system.adapter.rpi2.1 : rpi2 : iob-slave1-Nowak-Automatisierung - enabled system.adapter.sayit.0 : sayit : ioBrokerMaster - disabled + system.adapter.scenes.0 : scenes : ioBrokerMaster - enabled + system.adapter.shuttercontrol.0 : shuttercontrol : ioBrokerMaster - enabled + system.adapter.smartmeter.0 : smartmeter : iob-slave1-Nowak-Automatisierung - enabled + system.adapter.sonos.0 : sonos : ioBrokerMaster - enabled + system.adapter.sony-bravia.0 : sony-bravia : ioBrokerMaster - enabled + system.adapter.sprinklecontrol.0 : sprinklecontrol : ioBrokerMaster - enabled + system.adapter.statistics.0 : statistics : ioBrokerMaster - enabled system.adapter.synology.0 : synology : ioBrokerMaster - disabled, port: 5000 + system.adapter.tankerkoenig.0 : tankerkoenig : ioBrokerMaster - enabled + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tr-064.0 : tr-064 : ioBrokerMaster - disabled + system.adapter.unifi.0 : unifi : ioBrokerMaster - enabled + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : ioBrokerMaster - enabled system.adapter.yr.0 : yr : ioBrokerMaster - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : ioBrokerMaster - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : ioBrokerMaster - enabled, port: 0 + system.adapter.hue.0 : hue : ioBrokerMaster - enabled, port: 443 + system.adapter.influxdb.0 : influxdb : ioBrokerMaster - enabled, port: 8086 + system.adapter.telegram.0 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : ioBrokerMaster - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.6.1 Adapter "alarm" : 3.3.12 , installed 3.3.12 Adapter "alias-manager": 1.2.4 , installed 1.2.4 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "bshb" : 0.2.4 , installed 0.2.4 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "doorbird" : 1.0.5 , installed 1.0.5 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "geofency" : 1.2.4 , installed 1.2.4 Adapter "growatt" : 3.0.2 , installed 3.0.2 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "heatingcontrol": 2.10.6 , installed 2.10.6 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.18 , installed 1.15.18 Adapter "hue" : 3.9.3 , installed 3.9.3 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "jarvis" : 3.1.2 , installed 3.1.2 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "linkeddevices": 1.5.5 , installed 1.5.5 Adapter "luftdaten" : 3.0.0 , installed 3.0.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "odl" : 2.0.5 , installed 2.0.5 Adapter "owfs" : 0.7.0 , installed 0.7.0 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "pvforecast" : 2.7.1 , installed 2.7.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shuttercontrol": 1.5.0 , installed 1.5.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartmeter" : 3.3.4 , installed 3.3.4 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sonos" : 2.3.1 , installed 2.3.1 Adapter "sony-bravia" : 1.0.9 , installed 1.0.9 Adapter "sprinklecontrol": 0.2.13 , installed 0.2.13 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "unifi" : 0.6.6 , installed 0.6.6 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yahka" : 0.17.0 , installed 0.17.0 Adapter "yr" : 5.3.0 , installed 5.3.0 Objects and States Please stand by - This may take a while Objects: 21538 States: 18501 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://security.debian.org/debian-security bullseye-security InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Hit:6 https://repos.influxdata.com/debian bullseye InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 172.36.0.10:8081 0.0.0.0:* LISTEN 1000 17099 1873/io.admin.0 tcp 0 0 172.36.0.10:8100 0.0.0.0:* LISTEN 1000 19677 2222/io.doorbird.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15410 553/cupsd tcp 0 0 127.0.0.1:33633 0.0.0.0:* LISTEN 1000 22964 2974/io.yahka.0 tcp 0 0 172.36.0.10:9000 0.0.0.0:* LISTEN 1000 18846 680/iobroker.js-con tcp 0 0 172.36.0.10:9001 0.0.0.0:* LISTEN 1000 18725 680/iobroker.js-con tcp 0 0 0.0.0.0:42001 0.0.0.0:* LISTEN 1000 18222 2149/io.hm-rpc.1 tcp 0 0 0.0.0.0:42010 0.0.0.0:* LISTEN 1000 19586 2133/io.hm-rpc.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11878 585/sshd: /usr/sbin tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1000 20703 2409/io.jarvis.0 tcp6 0 0 :::8086 :::* LISTEN 999 13075 462/influxd tcp6 0 0 :::8082 :::* LISTEN 1000 22845 2967/io.web.0 tcp6 0 0 :::3500 :::* LISTEN 1000 19181 2072/io.sonos.0 tcp6 0 0 ::1:631 :::* LISTEN 0 15409 553/cupsd tcp6 0 0 :::61991 :::* LISTEN 1000 20583 2355/io.harmony.0 tcp6 0 0 :::22 :::* LISTEN 0 11880 585/sshd: /usr/sbin tcp6 0 0 :::41159 :::* LISTEN 1000 20441 2974/io.yahka.0 udp 0 0 0.0.0.0:43281 0.0.0.0:* 108 2032 403/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 11930 475/dhcpcd udp 0 0 0.0.0.0:61991 0.0.0.0:* 1000 20584 2355/io.harmony.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 14949 609/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 2030 403/avahi-daemon: r udp6 0 0 :::546 :::* 0 12024 475/dhcpcd udp6 0 0 :::58029 :::* 108 2033 403/avahi-daemon: r udp6 0 0 :::5353 :::* 108 2031 403/avahi-daemon: r *** Log File - Last 25 Lines *** "000A9D89B93E49:1":{"Name":"Buero_Wandthermostat%3A1","Interface":"HmIP-RF"}, "000A9D89B93E49:2":{"Name":"Buero_Wandthermostat%3A2","Interface":"HmIP-RF"}, "000A9D89B93E49:3":{"Name":"Buero_Wandthermostat%3A3","Interface":"HmIP-RF"}, "000A9D89B93E49:4":{"Name":"Buero_Wandthermostat%3A4","Interface":"HmIP-RF"}, "000A9D89B93E49:5":{"Name":"Buero_Wandthermostat%3A5","Interface":"HmIP-RF"}, "000A9D89B93E49:6":{"Name":"Buero_Wandthermostat%3A6","Interface":"HmIP-RF"}, "000A9D89B93E49:7":{"Name":"Buero_Wandthermostat%3A7","Interface":"HmIP-RF"}, "OEQ1019551":{"Name":"Carport_Bewegungsmelder","Interface":"BidCos-RF"}, "OEQ1019551:0":{"Name":"Carport_Bewegungsmelder%3A0","Interface":"BidCos-RF"}, "OEQ1019551:1":{"Name":"10_Carport_Bewegungsmelder_Einfahrt%3A1","Interface":"BidCos-RF"}, "OEQ1019551:2":{"Name":"10_Carport_Bewegungsmelder_Hof%3A2","Interface":"BidCos-RF"}, "OEQ1019551:3":{"Name":"10_Carport_frei%3A3","Interface":"BidCos-RF"}, "OEQ2264080":{"Name":"Carport_Licht_SD","Interface":"BidCos-RF"}, "OEQ2264080:0":{"Name":"Carport_Licht_SD%3A0","Interface":"BidCos-RF"}, "OEQ2264080:1":{"Name":"20_Carport_Beleuchtung%3A1","Interface":"BidCos-RF"}, "OEQ2264080:2":{"Name":"20_Carport_SD%3A2","Interface":"BidCos-RF"} 2023-08-02 17:25:00.335 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 8749 2023-08-02 17:25:07.379 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 17:30:00.313 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 10675 2023-08-02 17:30:04.363 - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 started with pid 10690 2023-08-02 17:30:09.045 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-02 17:30:15.019 - warn: luftdaten.0 (10690) State "luftdaten.0.38240.timestamp" has no existing object, this might lead to an error in future versions 2023-08-02 17:30:15.654 - info: host.ioBrokerMaster instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR) 2023-08-02 17:35:00.359 - info: host.ioBrokerMaster instance system.adapter.dwd.0 started with pid 11975 2023-08-02 17:35:07.726 - info: host.ioBrokerMaster instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) ============ Mark until here for C&P ============= iob diag has finished. Press any key for a summary Copy text starting here: ======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Debian GNU/Linux 11 (bullseye) Kernel: 6.1.21-v8+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: true Boot Target: graphical.target Pending OS-Updates: 1 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v18.17.0 /usr/bin/node v18.17.0 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 7.8G 2.5G 4.3G 35M 972M 5.1G Swap: 99M 0B 99M Total: 7.9G 2.5G 4.4G Active iob-Instances: 37 Active repo(s): stable ioBroker Core: js-controller 4.0.24 admin 6.6.1 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : ioBrokerMaster - enabled, port: 8081, bind: 172.36.0.10, run as: admin + system.adapter.web.0 : web : ioBrokerMaster - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 21538 States: 18502 Size of iob-Database: 32M /opt/iobroker/iobroker-data/objects.jsonl 20M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================Grüße
Markus@markus-now
-User "iobroker" ist ungünstig da der iobroker eben diesen User selbst anlegt ... nur für sich selbst
-Desktop ausknipsen
-Sentry im HM-Adapter deaktivieren -
@markus-now
-User "iobroker" ist ungünstig da der iobroker eben diesen User selbst anlegt ... nur für sich selbst
-Desktop ausknipsen
-Sentry im HM-Adapter deaktivieren -
@djmarc75 Sentry war schon deaktiviert, was meinst du mit Desktop ausknipsen.
Soll ich den user ändern?@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
Sentry war schon deaktiviert
wo genau ?
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
was meinst du mit Desktop ausknipsen
auf einem Server läuft kein Desktop (grafische Oberfläche)
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
Soll ich den user ändern?
Eine Empfehlung :)
-
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
Sentry war schon deaktiviert
wo genau ?
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
was meinst du mit Desktop ausknipsen
auf einem Server läuft kein Desktop (grafische Oberfläche)
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
Soll ich den user ändern?
Eine Empfehlung :)
@djmarc75 sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
Soll ich den user ändern?
Eine Empfehlung :)
// als root oder mit sudo adduser xxx //nicht am stück kopieren usermod -aG sudo xxx -
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
Sentry war schon deaktiviert
wo genau ?
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
was meinst du mit Desktop ausknipsen
auf einem Server läuft kein Desktop (grafische Oberfläche)
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
Soll ich den user ändern?
Eine Empfehlung :)
@djmarc75
hier hab ich das gemacht
Habe eigentlich kein Desktop installiert, kann ich das prüfen
ich habe noch einen iobroker slave im netzwerk
-
@djmarc75
hier hab ich das gemacht
Habe eigentlich kein Desktop installiert, kann ich das prüfen
ich habe noch einen iobroker slave im netzwerk
-
@djmarc75
Sorry, aber ich habe auch schon fast keine Lust mehr. Über eine Woche beschäftige ich mich schon mit dem Problem, bevor ich mich hier gemeldet hab.
Bin nicht so ein Profi wie ihr. -
@djmarc75
hier hab ich das gemacht
Habe eigentlich kein Desktop installiert, kann ich das prüfen
ich habe noch einen iobroker slave im netzwerk
@markus-now sagte in ioBroker aktualisiert Homematic Datenpunkte nicht mehr:
Habe eigentlich kein Desktop installiert, kann ich das prüfen
Stell es z. B. in
sudo raspi-configein. Dort dann
1 System Options S5 Boot / Auto Login B1 Console -
@djmarc75
Sorry, aber ich habe auch schon fast keine Lust mehr. Über eine Woche beschäftige ich mich schon mit dem Problem, bevor ich mich hier gemeldet hab.
Bin nicht so ein Profi wie ihr.@markus-now
Mache bitte mal Bilder von der Konfigurationsseite jedes hm adapters.btw. man fragt immer 12 stunden bevor man total genervt ist :) da ist die zündschnur noch länger.
Support us
735
Online32.5k
Benutzer81.7k
Themen1.3m
Beiträge