[gelöst] Payload Daten in Objekte schreiben

GregorS

@paul53

Alle anderen Scripte laufen einwandfrei.
NSPanel funktioniert auch problemlos.
Meldungen via Telegram auch

GregorS

@homoran said in Payload Daten in Objekte schreiben:

Multihost? und richtigen Host ausgewählt?
sonst starte die javascript Instanz mal neu

Multihost? und richtigen Host ausgewählt? Wo muss man dies einstellen.
Habe ich noch nicht gesehen.

javascript habe ich eben neu gestartet.

paul53

@gregors sagte: Alle anderen Scripte laufen einwandfrei.

Auf welche Protokoll-Stufe ist die Javascript-Instanz eingestellt?

GregorS

@paul53
Logstufe "Error"

GregorS

Hab auf Debug umgestellt.
Jetzt kommt was.

javascript.0
	2023-07-22 18:34:43.750	info	script.js.LoRAWAN_DEV_1: undefined
javascript.0
	2023-07-22 18:34:43.749	info	script.js.LoRAWAN_DEV_1: {"end_device_ids":{"device_id":"eui-a840414601871305","application_ids":{"application_id":"gs-mg-dragino-01"},"dev_eui":"A840414601871305","join_eui":"A840410000000101","dev_addr":"260BE9CF"},"correlation_ids":["as:up:01H5Z784WHCPR9CKQMD6YA61PJ","gs:conn:01H5TF5M58SGAQZTB5B766P6EM","gs:up:host:01H5TF5M5DGPVSKX7RKJ1HPXFF","gs:uplink:01H5Z784NZ778FHQVN8ATABV4B","ns:uplink:01H5Z784P0FCGCHDWHMB7EZSAR","rpc:/ttn.lorawan.v3.GsNs/HandleUplink:01H5Z784P0MKF1ZWAFJ9K7394H","rpc:/ttn.lorawan.v3.NsAs/HandleUplink:01H5Z784WGE4FZ7ETJHPJJQ9DV"],"received_at":"2023-07-22T16:34:43.728419808Z","uplink_message":{"session_key_id":"AYlu5XV3aMaeiMVAq8yISw==","f_port":2,"f_cnt":4350,"frm_payload":"NgUAAAAAAAA0/0E=","decoded_payload":{"ACI1_mA":"0.000", "ACI2_mA":"0.000", "AVI1_V":"13.829", "AVI2_V":"0.000", "Acount_times":null, "Count1_times":null, "Count2_times":null, "DI1_status":"L", "DI2_status":"H", "DI3_status":null, "DO1_status":"H", "DO2_status":"H", "DO3_status":null, "First_status":null, "Hardware_mode":"LT22222", "RO1_status":"OFF", "RO2_status":"OFF", "Work_mode":"2ACI+2AVI"},"rx_metadata":[{"gateway_ids":{"gateway_id":"eui-7076ff0056080b0f","eui":"7076FF0056080B0F"},"time":"2023-07-22T16:34:42.898Z","timestamp":3874550100,"rssi":-113,"channel_rssi":-113,"snr":-9.5,"uplink_token":"CiIKIAoUZXVpLTcwNzZmZjAwNTYwODBiMGYSCHB2/wBWCAsPENTiw7cOGgwIo4rwpQYQluzr9wEgoOC66eH+JSoMCKKK8KUGEIDJmawD","channel_index":1,"gps_time":"2023-07-22T16:34:42.898Z","received_at":"2023-07-22T16:34:42.235671618Z"}],"settings":{"data_rate":{"lora":{"bandwidth":125000, "spreading_factor":12, "coding_rate":"4/5"}}, "frequency":"867300000", "timestamp":3874550100, "time":"2023-07-22T16:34:42.898Z"},"received_at":"2023-07-22T16:34:43.520848844Z","consumed_airtime":"1.482752s","version_ids":{"brand_id":"dragino", "model_id":"lt22222-l", "hardware_version":"_unknown_hw_version_", "firmware_version":"1.5.6", "band_id":"EU_863_870"},"network_ids":{"net_id":"000013","tenant_id":"ttn","cluster_id":"eu1","cluster_address":"eu1.cloud.thethings.network"}}}

paul53

@gregors sagte: Hab auf Debug umgestellt.

Stell auf "info".

@gregors sagte in Payload Daten in Objekte schreiben:

Jetzt kommt was.

Auch alle 2 Minuten aus dem Trigger?

GregorS

@paul53

18:43:37.493	info	javascript.0 (652027) Start javascript script.js.LoRAWAN_DEV_1
18:43:37.496	info	javascript.0 (652027) script.js.LoRAWAN_DEV_1: {"end_device_ids":{"device_id":"eui-a840414601871305","application_ids":{"application_id":"gs-mg-dragino-01"},"dev_eui":"A840414601871305","join_eui":"A840410000000101","dev_addr":"260BE9CF"},"correlation_ids":["as:up:01H5Z7MYH48PRXF13SW1RS6HD4","gs:conn:01H5TF5M58SGAQZTB5B766P6EM","gs:up:host:01H5TF5M5DGPVSKX7RKJ1HPXFF","gs:uplink:01H5Z7MYARW1Q74HXA0T7D5T4S","ns:uplink:01H5Z7MYAR2XJWHT5VS9XVHEZZ","rpc:/ttn.lorawan.v3.GsNs/HandleUplink:01H5Z7MYARMWPFGXW00K1X3WSV","rpc:/ttn.lorawan.v3.NsAs/HandleUplink:01H5Z7MYH4FKD5VX7EZXWGJKHZ"],"received_at":"2023-07-22T16:41:43.204341812Z","uplink_message":{"session_key_id":"AYlu5XV3aMaeiMVAq8yISw==","f_port":2,"f_cnt":4357,"frm_payload":"NgMAAAAAAAA0/0E=","decoded_payload":{"ACI1_mA":"0.000", "ACI2_mA":"0.000", "AVI1_V":"13.827", "AVI2_V":"0.000", "Acount_times":null, "Count1_times":null, "Count2_times":null, "DI1_status":"L", "DI2_status":"H", "DI3_status":null, "DO1_status":"H", "DO2_status":"H", "DO3_status":null, "First_status":null, "Hardware_mode":"LT22222", "RO1_status":"OFF", "RO2_status":"OFF", "Work_mode":"2ACI+2AVI"},"rx_metadata":[{"gateway_ids":{"gateway_id":"eui-7076ff0056080b0f","eui":"7076FF0056080B0F"},"time":"2023-07-22T16:41:42.891Z","timestamp":4294543004,"rssi":-118,"channel_rssi":-118,"snr":-12.2,"uplink_token":"CiIKIAoUZXVpLTcwNzZmZjAwNTYwODBiMGYSCHB2/wBWCAsPEJyN5v8PGgwIxo3wpQYQiODg3AMg4KLXtf6KJioMCMaN8KUGEMCp7qgD","channel_index":3,"gps_time":"2023-07-22T16:41:42.891Z","received_at":"2023-07-22T16:41:42.692566999Z"}],"settings":{"data_rate":{"lora":{"bandwidth":125000, "spreading_factor":12, "coding_rate":"4/5"}}, "frequency":"867700000", "timestamp":4294543004, "time":"2023-07-22T16:41:42.891Z"},"received_at":"2023-07-22T16:41:43.000778353Z","consumed_airtime":"1.482752s","version_ids":{"brand_id":"dragino", "model_id":"lt22222-l", "hardware_version":"_unknown_hw_version_", "firmware_version":"1.5.6", "band_id":"EU_863_870"},"network_ids":{"net_id":"000013","tenant_id":"ttn","cluster_id":"eu1","cluster_address":"eu1.cloud.thethings.network"}}}
18:43:37.496	info	javascript.0 (652027) script.js.LoRAWAN_DEV_1: registered 1 subscription, 0 schedules, 0 messages, 0 logs and 0 file subscriptions
18:43:43.227	info	javascript.0 (652027) script.js.LoRAWAN_DEV_1: {"end_device_ids":{"device_id":"eui-a840414601871305","application_ids":{"application_id":"gs-mg-dragino-01"},"dev_eui":"A840414601871305","join_eui":"A840410000000101","dev_addr":"260BE9CF"},"correlation_ids":["as:up:01H5Z7RKQ7EM4GPTNH3A4ZZQRM","gs:conn:01H5TF5M58SGAQZTB5B766P6EM","gs:up:host:01H5TF5M5DGPVSKX7RKJ1HPXFF","gs:uplink:01H5Z7RKGRA8VCCA5GDJDAJ32G","ns:uplink:01H5Z7RKGSHDHETYPCFKHZ4WB8","rpc:/ttn.lorawan.v3.GsNs/HandleUplink:01H5Z7RKGSTVXAW22XNQWVCPYS","rpc:/ttn.lorawan.v3.NsAs/HandleUplink:01H5Z7RKQ7Q4ASFM7XB599YRYK"],"received_at":"2023-07-22T16:43:43.207301529Z","uplink_message":{"session_key_id":"AYlu5XV3aMaeiMVAq8yISw==","f_port":2,"f_cnt":4359,"frm_payload":"NicAAAAAAAA0/0E=","decoded_payload":{"ACI1_mA":"0.000", "ACI2_mA":"0.000", "AVI1_V":"13.863", "AVI2_V":"0.000", "Acount_times":null, "Count1_times":null, "Count2_times":null, "DI1_status":"L", "DI2_status":"H", "DI3_status":null, "DO1_status":"H", "DO2_status":"H", "DO3_status":null, "First_status":null, "Hardware_mode":"LT22222", "RO1_status":"OFF", "RO2_status":"OFF", "Work_mode":"2ACI+2AVI"},"rx_metadata":[{"gateway_ids":{"gateway_id":"eui-7076ff0056080b0f","eui":"7076FF0056080B0F"},"time":"2023-07-22T16:43:42.882Z","timestamp":119566764,"rssi":-117,"channel_rssi":-117,"snr":-14.5,"uplink_token":"CiIKIAoUZXVpLTcwNzZmZjAwNTYwODBiMGYSCHB2/wBWCAsPEKzjgTkaCgi/jvClBhCVjhYg4I/wtb2OJioMCL6O8KUGEICByaQD","channel_index":7,"gps_time":"2023-07-22T16:43:42.882Z","received_at":"2023-07-22T16:43:42.693099748Z"}],"settings":{"data_rate":{"lora":{"bandwidth":125000, "spreading_factor":12, "coding_rate":"4/5"}}, "frequency":"868500000", "timestamp":119566764, "time":"2023-07-22T16:43:42.882Z"},"received_at":"2023-07-22T16:43:43.001729646Z","consumed_airtime":"1.482752s","version_ids":{"brand_id":"dragino", "model_id":"lt22222-l", "hardware_version":"_unknown_hw_version_", "firmware_version":"1.5.6", "band_id":"EU_863_870"},"network_ids":{"net_id":"000013","tenant_id":"ttn","cluster_id":"eu1","cluster_address":"eu1.cloud.thethings.network"}}}
18:43:43.228	info	javascript.0 (652027) script.js.LoRAWAN_DEV_1: undefined

paul53

@gregors

log(payload);

zeigt offenbar undefined, da "decoded_payload" falsch geschrieben ist (Zeile 5).

Homoran

@gregors sagte in Payload Daten in Objekte schreiben:

Logstufe "Error"

nee, nich?

GregorS

@paul53

Habe ich korrigiert. Der Teufel steckt im Detail

19:01:43.238	info	javascript.0 (652027) script.js.LoRAWAN_DEV_1: {"end_device_ids":{"device_id":"eui-a840414601871305","application_ids":{"application_id":"gs-mg-dragino-01"},"dev_eui":"A840414601871305","join_eui":"A840410000000101","dev_addr":"260BE9CF"},"correlation_ids":["as:up:01H5Z8SJDEQ23SXYZE51TC07BD","gs:conn:01H5TF5M58SGAQZTB5B766P6EM","gs:up:host:01H5TF5M5DGPVSKX7RKJ1HPXFF","gs:uplink:01H5Z8SJ70D6PACPHB0R2GHN04","ns:uplink:01H5Z8SJ712X5TEW0CWDE4CXQM","rpc:/ttn.lorawan.v3.GsNs/HandleUplink:01H5Z8SJ715Z75WJ51BS6ZWF31","rpc:/ttn.lorawan.v3.NsAs/HandleUplink:01H5Z8SJDDM0YCG82TXN5P6Q2T"],"received_at":"2023-07-22T17:01:43.213639158Z","uplink_message":{"session_key_id":"AYlu5XV3aMaeiMVAq8yISw==","f_port":2,"f_cnt":4377,"frm_payload":"NiwAAAAAAAA0/0E=","decoded_payload":{"ACI1_mA":"0.000", "ACI2_mA":"0.000", "AVI1_V":"13.868", "AVI2_V":"0.000", "Acount_times":null, "Count1_times":null, "Count2_times":null, "DI1_status":"L", "DI2_status":"H", "DI3_status":null, "DO1_status":"H", "DO2_status":"H", "DO3_status":null, "First_status":null, "Hardware_mode":"LT22222", "RO1_status":"OFF", "RO2_status":"OFF", "Work_mode":"2ACI+2AVI"},"rx_metadata":[{"gateway_ids":{"gateway_id":"eui-7076ff0056080b0f","eui":"7076FF0056080B0F"},"time":"2023-07-22T17:01:42.871Z","timestamp":1199555188,"rssi":-118,"channel_rssi":-118,"snr":-13.8,"uplink_token":"CiIKIAoUZXVpLTcwNzZmZjAwNTYwODBiMGYSCHB2/wBWCAsPEPSE/7sEGgsI95bwpQYQ0Mb0AyCgqr7Y9K0mKgwI9pbwpQYQwM+pnwM=","channel_index":4,"gps_time":"2023-07-22T17:01:42.871Z","received_at":"2023-07-22T17:01:42.714662309Z"}],"settings":{"data_rate":{"lora":{"bandwidth":125000, "spreading_factor":12, "coding_rate":"4/5"}}, "frequency":"867900000", "timestamp":1199555188, "time":"2023-07-22T17:01:42.871Z"},"received_at":"2023-07-22T17:01:43.009292984Z","consumed_airtime":"1.482752s","version_ids":{"brand_id":"dragino", "model_id":"lt22222-l", "hardware_version":"_unknown_hw_version_", "firmware_version":"1.5.6", "band_id":"EU_863_870"},"network_ids":{"net_id":"000013","tenant_id":"ttn","cluster_id":"eu1","cluster_address":"eu1.cloud.thethings.network"}}}
19:01:43.238	info	javascript.0 (652027) script.js.LoRAWAN_DEV_1: {'ACI1_mA':'0.000','ACI2_mA':'0.000','AVI1_V':'13.868','AVI2_V':'0.000','Acount_times':null,'Count1_times':null,'Count2_times':null,'DI1_status':'L','DI2_status':'H','DI3_status':null,'DO1_status':'H','DO2_status':'H','DO3_status':null,'First_status':null,'Hardware_mode':'LT22222','RO1_status':'OFF','RO2_status':'OFF','Work_mode':'2ACI+2AVI'}

paul53

@gregors sagte: Der Teufel steckt im Detail

... und nun wurde auch der Datenpunkt "AVI1_V" mit dem Wert 13.87 gefüllt?

GregorS

@paul53
@Homoran
@marc-berg

Danke für Eure Geduld und die Hilfe.
Jetzt funktioniert es.

GregorS

Wie kann ich denn
"rssi" und "time"
extrahieren?
Alle anderen Infos haben funktioniert.

paul53

@gregors sagte: "rssi" und "time"

    const msg = JSON.parse(dp.state.val).uplink_message;
    const payload = msg.decoded_payload;
    const rx0 = msg.rx_metadata[0];

    log(rx0.time);
    log(rx0.rssi);

GregorS

Nachdem ich jetzt die Daten in ioBroker habe, ist mir die Nacht eine
zusätzliche Anwendung durch den Kopf gegangen.
Dazu muss ich allerdings RO1 schalten.
Über das Gateway habe ich bereits Erfolg gehabt, und die Rückmeldung im ioBroker aufgenommen.
Messaging / Downlink --> 03 00 11 Relais öffnen
--> 03 01 11 Relais schliessen

Wie kann ich das RO1 aus ioBroker schalten?

Marc Berg

@gregors sagte in [gelöst] Payload Daten in Objekte schreiben:

Nachdem ich jetzt die Daten in ioBroker habe, ist mir die Nacht eine
zusätzliche Anwendung durch den Kopf gegangen.
Dazu muss ich allerdings RO1 schalten.
Über das Gateway habe ich bereits Erfolg gehabt, und die Rückmeldung im ioBroker aufgenommen.
Messaging / Downlink --> 03 00 11 Relais öffnen
--> 03 01 11 Relais schliessen

Wie kann ich das RO1 aus ioBroker schalten?

Ich habe das über Node Red umgesetzt, aber den entscheidenden Teil kannst du vielleicht adaptieren.

So sieht ein einfacher Beispiel-Flow aus:

Der Payload (hier "0501100200") wird in einem Function-Node verarbeitet (Base64 Kodierung + Erzeugung des Downlinks) und dann per MQTT an TTN gesendet.

Der Code im Function-Node sieht so aus (in 'msg.hex' steckt "0501100200"):

var s=msg.hex;
var b=Buffer.from(s, 'hex');            //Buffer erzeugen
s=b.toString("base64");                 //to base64
msg.payload=
{
    "downlinks": [{
      "f_port": 2,
      "frm_payload": s,
      "priority": "NORMAL"
    }]
}
return msg;

Dieser so aufbereitete Payload wird dann per MQTT an folgendes Topic gesendet:

v3/<APPLICATION-ID>@ttn/devices/<DEVICE_ID>/down/replace

GregorS

@marc-berg
Danke für den Denkanstoss.
Habe aber bisher noch keinen Erfolg gehabt.
Bekomme das Payload nicht gesendet.

Bleibe dran

Marc Berg

@gregors sagte in [gelöst] Payload Daten in Objekte schreiben:

Bekomme das Payload nicht gesendet.
Bleibe dran

Das müsste ja dann bei dir zum Einschalten so aussehen:

{
    "downlinks": [{
      "f_port": 2,
      "frm_payload": "AwER",
      "priority": "NORMAL"
    }]
}

und zum Ausschalten so:

{
    "downlinks": [{
      "f_port": 2,
      "frm_payload": "AwAR",
      "priority": "NORMAL"
    }]
}

Auf welche Weise sendest du den Downlink?

GregorS

@marc-berg said in [gelöst] Payload Daten in Objekte schreiben:

Auf welche Weise sendest du den Downlink?

Was meinst du damit?

Ich habe mehrer Versionen probiert, aber es hakt immer am "Doppelpunkt" hinter downlinks.
Ich galube, da fehlt was entscheidendes.

//'mqtt.2.v3.gs-mg-dragino-01@ttn.devices.eui-a840414601871305.down.sent'/*v3/gs-mg-dragino-01@ttn/devices/eui-a840414601871305/down/sent*/

on('mqtt.2.v3.gs-mg-dragino-01@ttn.devices.eui-a840414601871305.down', function (dp) 
{
  "downlinks": [{
    "f_port": 2,
    "frm_payload": "130011=",
    "priority": "NORMAL"
  }]
}

18:26:04.002	error	javascript.0 (681137) script.js.LoRAWAN_DEV_1_senden compile failed: at script.js.LoRAWAN_DEV_1_senden:4

paul53

@gregors
Du willst doch keine Daten erhalten (triggern), sondern Daten senden. Das macht man mit sendTo() oder mit setState() auf den Datenpunkt, der an das Topic "v3/gs-mg-dragino-01@ttn/devices/eui-a840414601871305/down/replace" sendet.

NEWS

[gelöst] Payload Daten in Objekte schreiben

Support us

836
Online

31.9k
Users

80.2k
Topics

1.3m
Posts

NEWS

[gelöst] Payload Daten in Objekte schreiben

Support us

836Online

31.9kUsers

80.2kTopics

1.3mPosts

836
Online

31.9k
Users

80.2k
Topics

1.3m
Posts