NEWS

crepp1967

@ilovegym
Ok, ich hab nun die yaml nochmal nach Vorlage erstellt (mit meinen anpassungen)
Jetzt läuft alles wie es soll...

Vielen Dank an Euch für die Tipps!

Gruß
Torsten

crepp1967

Ja das habe ich jetzt auch gemerkt. Der Fork tasmota für ESP32 wird wohl nicht weiter entwickelt. Wäre interessant gewesen ...

Trotzdem Danke für Eure Hilfe
Gruß
crepp

crepp1967

@66er
Nein, ich lass das jetzt so - es ist alles so wie gewünscht.
Danke

crepp1967

Hallo,

danke an alle. Die drei letzten Antworten waren besonders wichtig.
ESPEasy hatte ich vor Jahren schon mal getestet. Das ist jetzt ne gute Gelegenheit das mal aufzufrischen.

Gruß
crepp

crepp1967

@glasfaser
Also mein Grundproblem (nicht startende Javascript Adapter) ist nun zum Glück behoben, vielen Dank für die schnelle Hilfe und die Tips zum fixen.
Die hier im Thread noch so erwähnten Probleme werde ich im Anschluss beheben.
Damit kann ich den Thread auf "Gelöst" setzen.

Gruß
Torsten

crepp1967

@alk
Das klingt sehr interessant u Du hast sicher schon etwas Zeit in die Konfig gesteckt - kommt auf jeden Fall in die engere Auswahl.
Gruß
Torsten

crepp1967

@ilovegym
Ok, ich hab nun die yaml nochmal nach Vorlage erstellt (mit meinen anpassungen)
Jetzt läuft alles wie es soll...

Vielen Dank an Euch für die Tipps!

Gruß
Torsten

crepp1967

@arteck
Ich muss gestehen dass ich einen Fehler gemacht habe:
Ich habe lt. Anleitung zigbee2mqtt immer die configuration.example.yaml geändert und dann per cp-Befehl auf configuration.yaml kopiert.
Ich habe also nicht die configuration.yaml direkt geändert...
In der configuration.example.yaml stand der Eintrag availibity:true drinnen - aber in der yaml nicht!

Dies habe ich nun geändert:
Hier meine aktuelle configuration.yaml:

root@proxmox-z2m:~# nano /opt/zigbee2mqtt/data/configuration.yaml
  GNU nano 7.2                                                               /opt/zigbee2mqtt/data/configuration.yaml
frontend:
  enabled: true
mqtt:
  base_topic: zigbee2mqtt
  server: mqtt://127.0.0.1:1887
serial:
  port: tcp://192.168.1.104:6638
  baudrate: 115200
  adapter: zstack
  disable_led: false
advanced:
  network_key:
    - 111
    - 245
    - 137
    - 132
    - 35
    - 238
    - 122
    - 209
    - 25
    - 97
    - 4
    - 38
    - 181
    - 192
    - 202
    - 227
  pan_id: 3293
  ext_pan_id:
    - 128
    - 147
    - 219
    - 58
    - 51
    - 233
    - 173
    - 223
  transmit_power: 20
  log_level: debug
  availability: true
devices:
  '0xa4c138fe48a0f93a':
    friendly_name: tuya_temp_hum_1

Habe zigbee2mqtt Server und auch den iobroker neu gestartet - alles startet sauber.

Allerdings ist das Gerät immer noch deaktiviert...

Hier noch einen Protokollauszug vom zigbee2mqtt Adapter:

zigbee2mqtt.0
2025-02-18 13:52:09.136	info	==================================================================================

zigbee2mqtt.0
2025-02-18 13:52:09.135	info	|| Network panid 3293 channel: 11 ext_pan_id: 0x8093db3a33e9addf

zigbee2mqtt.0
2025-02-18 13:52:09.135	info	|| Coordinator type: zStack3x0 Version: 20221226 Serial: tcp://192.168.1.104:6638

zigbee2mqtt.0
2025-02-18 13:52:09.135	info	|| Zigbee2MQTT Version: 2.1.1

zigbee2mqtt.0
2025-02-18 13:52:09.135	info	============================ Zigbee2MQTT Information =============================

zigbee2mqtt.0
2025-02-18 13:52:09.126	info	Connect to Zigbee2MQTT over external mqtt connection.

zigbee2mqtt.0
2025-02-18 13:52:09.034	info	==================================================================================

zigbee2mqtt.0
2025-02-18 13:52:09.034	info	|| Coordinator Check Cron : 0 3 * * *

zigbee2mqtt.0
2025-02-18 13:52:09.033	info	|| Coordinator Check Loglevel: info

zigbee2mqtt.0
2025-02-18 13:52:09.033	info	|| Use Automatic Coordinator Check: no

zigbee2mqtt.0
2025-02-18 13:52:09.033	info	|| Use Simple Press/Release State: no

zigbee2mqtt.0
2025-02-18 13:52:09.033	info	|| Use Simple Move/Stop State: no

zigbee2mqtt.0
2025-02-18 13:52:09.033	info	|| Use Simple Hold/Release State: yes

zigbee2mqtt.0
2025-02-18 13:52:09.032	info	|| Use Device Icons: no

zigbee2mqtt.0
2025-02-18 13:52:09.032	info	|| Use Event In Desc: yes

zigbee2mqtt.0
2025-02-18 13:52:09.032	info	|| Use BrightnessStep OnOff: no

zigbee2mqtt.0
2025-02-18 13:52:09.031	info	|| Use BrightnessMove OnOff: no

zigbee2mqtt.0
2025-02-18 13:52:09.031	info	|| Use ColorTemperature ColorSync: no

zigbee2mqtt.0
2025-02-18 13:52:09.030	info	|| Use Kelvin: no

zigbee2mqtt.0
2025-02-18 13:52:09.030	info	|| Proxy Zigbee2MQTT Logs to ioBroker Logs: activated

zigbee2mqtt.0
2025-02-18 13:52:09.030	info	|| Zigbee2MQTT Debug Log: deactivated

zigbee2mqtt.0
2025-02-18 13:52:09.029	info	|| Zigbee2MQTT Externanl MQTT Credentials: use

zigbee2mqtt.0
2025-02-18 13:52:09.029	info	|| Zigbee2MQTT Externanl MQTT Port: 1887

zigbee2mqtt.0
2025-02-18 13:52:09.029	info	|| Zigbee2MQTT Externanl MQTT Server: 192.168.1.206

zigbee2mqtt.0
2025-02-18 13:52:09.029	info	|| Zigbee2MQTT Connection Type: exmqtt

zigbee2mqtt.0
2025-02-18 13:52:09.029	info	|| Zigbee2MQTT Frontend Port: 8080

zigbee2mqtt.0
2025-02-18 13:52:09.029	info	|| Zigbee2MQTT Frontend Server: 192.168.1.206

zigbee2mqtt.0
2025-02-18 13:52:09.028	info	|| Zigbee2MQTT Frontend Scheme: http

zigbee2mqtt.0
2025-02-18 13:52:09.028	info	================================= Adapter Config =================================

zigbee2mqtt.0
2025-02-18 13:52:09.004	info	starting. Version 3.0.2 in /opt/iobroker/node_modules/iobroker.zigbee2mqtt, node: v20.18.3, js-controller: 7.0.6

zigbee2mqtt.0
2025-02-18 13:51:49.289	info	Terminated (NO_ERROR): Without reason

zigbee2mqtt.0
2025-02-18 13:51:49.288	info	terminating

crepp1967

@crunchip
ich hab die Doku schon mehrfach durchgearbeitet - ich finde leider keinen Anhaltspunkt was noch fehlt...
availibilty steht auf true und der Port passt auch
Der zigbee2mqtt Server selber läuft ja...

crepp1967

@ilovegym
Ich steh leider im Regen...

crepp1967

@ilovegym
Ich habe nun den Port des mosquitto auf 1887 umgestellt.
zigbee2mqtt läuft (availibilty steht auf true)
Ich hab den iob-Adapter komplett neu installiert/konfiguriert.
Ein Gerät angelernt, ich hab aber das selbe Problem: es ist deaktiviert.

Hier noch meine yaml-Datei:

version: 4
homeassistant:
  enabled: false
frontend:
  enabled: true
mqtt:
  base_topic: zigbee2mqtt
  server: mqtt://127.0.0.1:1887
serial:
  port: tcp://192.168.1.104:6638
  baudrate: 115200
  adapter: zstack
  disable_led: false
advanced:
  network_key:
    - 111
    - 245
    - 137
    - 132
    - 35
    - 238
    - 122
    - 209
    - 25
    - 97
    - 4
    - 38
    - 181
    - 192
    - 202
    - 227
  pan_id: 3293
  ext_pan_id:
    - 128
    - 147
    - 219
    - 58
    - 51
    - 233
    - 173
    - 223
  transmit_power: 20
devices:
  '0xa4c138fe48a0f93a':
    friendly_name: tuya_temp_hum_1

crepp1967

@arteck
hab ich ngelesen

crepp1967

@crunchip sagte in zigbee2mqtt - keine aktiven Geräte:

availability: true

hab ich leider in der anleitung überlesen - ich habs in der yaml eingefügt, allerding evtl. noch ein Tab-Fehler gemacht.
Jetzt startet mein mqtt-Service nicht mehr.
Aber ich fummel das noch hin...

crepp1967

Hallo community,
Ich bin gerade am Umziehen meines Produktivsystems von Proxmox VM in einen Container.
Dabei läuft zur Zeit nur der Admin und ich habe mit zigbee angefangen zu konfigurieren -.
Ich möchte zukünftig auf zigbee2mqtt setzen (inklusive eines LAN-Coordinators)
Die Installation des Coordinators unter zigbee2mqtt ist abgeschlossen und ich habe auch 3 Geräte am Coordinatror angemeldet.
Die WebGui von zigbee2mqtt läuft und auch der zigbee2mqtt Adapter im iobroker läuft.
Es werden auch states published (kann ich im logfile des zigbee Servers sehen)
Allerdings sind alle meine drei Geräte nicht aktiv.

Adaptername: zigbee2mqtt
Link zu Adapterrepository: https://github.com/arteck/ioBroker.zigbee2mqtt
Adapterversion: 3.0.2
js-controller Version: 7.0.6
Admin Version: 7.4.10
Hardwaresystem: Proxmox AMD Ryzen 5
Arbeitsspeicher: 12GB
Festplattenart: 100GbB SSD
Betriebssystem: Linux Debian
Nodejs-Version: 20.18.3
NPM-Version: 10.8.2
Installationsart: Skript
Image, Docker genutzt: Nein
Ort, Name der Imagedatei: -

Script v.2025-02-02

*** BASE SYSTEM ***
 Static hostname: proxmox-iob-cont
       Icon name: computer-container
         Chassis: container ☐
  Virtualization: lxc
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.8.12-8-pve
    Architecture: x86-64
OS is similar to:

model name      : AMD Ryzen 5 PRO 2500U w/ Radeon Vega Mobile Gfx
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 17:57:01 up  6:03,  2 users,  load average: 4.34, 4.94, 5.02
CPU threads: 4


*** LIFE CYCLE STATUS ***
Unknown release codenamed ''. Please check yourself if the Operating System is actively maintained.

*** TIME AND TIMEZONES ***
               Local time: Sun 2025-02-16 17:57:01 CET
           Universal time: Sun 2025-02-16 16:57:01 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: inactive
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi users iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:             12G        596M         11G        131K        444M         11G
Swap:           4.2G          0B        4.2G
Total:           16G        596M         15G

Active iob-Instances:   8

        12000 M total memory
          569 M used memory
          687 M active memory
          262 M inactive memory
        11005 M free memory
            0 M buffer memory
          424 M swap cache
         4000 M total swap
            0 M used swap
         4000 M free swap

*** top - Table Of Processes  ***
top - 17:57:02 up  6:03,  2 users,  load average: 4.34, 4.94, 5.02
Tasks:  36 total,   1 running,  35 sleeping,   0 stopped,   0 zombie
%Cpu(s): 33.3 us, 16.7 sy,  0.0 ni, 33.3 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :  12000.0 total,  11003.6 free,    571.8 used,    424.8 buff/cache
MiB Swap:   4000.0 total,   4000.0 free,      0.0 used.  11428.2 avail Mem

*** FAILED SERVICES ***

  UNIT                 LOAD   ACTIVE SUB    DESCRIPTION
* run-rpc_pipefs.mount loaded failed failed RPC Pipe File System

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.


*** DMESG CRITICAL ERRORS ***
dmesg: read kernel buffer failed: Operation not permitted
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/loop1     ext4       98G  5.3G   88G   6% /
none           tmpfs     492K  4.0K  488K   1% /dev
udev           devtmpfs   32G     0   32G   0% /dev/tty
tmpfs          tmpfs      32G     0   32G   0% /dev/shm
tmpfs          tmpfs      13G  124K   13G   1% /run
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs     6.3G     0  6.3G   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET SOURCE     FSTYPE OPTIONS
/      /dev/loop1 ext4   rw,relatime

Files in neuralgic directories:

/var:
450M    /var/
249M    /var/cache
245M    /var/cache/apt
170M    /var/cache/apt/archives
147M    /var/lib

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 11.9M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.2G    /opt/iobroker/iobroker-data/
1.1G    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.3
/usr/bin/node           v20.18.3
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.30.0

nodejs:
  Installed: 20.18.3-1nodesource1
  Candidate: 20.18.3-1nodesource1
  Version table:
 *** 20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main amd64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://security.debian.org bookworm-security/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
proxmox-iob-cont    proxmox-iob-cont (version: 7.0.6, hostname: proxmox-iob-cont, alive, uptime: 21783)

Core adapters versions
js-controller:  7.0.6
admin:          7.4.10
javascript:     8.8.3

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : proxmox-iob-cont                         -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.awtrix-light.0           : awtrix-light          : proxmox-iob-cont                         - disabled
  system.adapter.backitup.0               : backitup              : proxmox-iob-cont                         - disabled
  system.adapter.hm-rpc.0                 : hm-rpc                : proxmox-iob-cont                         - disabled, port: 0
  system.adapter.hue.0                    : hue                   : proxmox-iob-cont                         - disabled, port: 443
  system.adapter.ical.0                   : ical                  : proxmox-iob-cont                         - disabled
  system.adapter.ical.1                   : ical                  : proxmox-iob-cont                         - disabled
  system.adapter.influxdb.0               : influxdb              : proxmox-iob-cont                         - disabled, port: 8086
  system.adapter.iot.0                    : iot                   : proxmox-iob-cont                         - disabled
  system.adapter.jarvis.0                 : jarvis                : proxmox-iob-cont                         - disabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.javascript.0             : javascript            : proxmox-iob-cont                         - disabled
  system.adapter.kecontact.0              : kecontact             : proxmox-iob-cont                         - disabled
  system.adapter.lgtv.0                   : lgtv                  : proxmox-iob-cont                         - disabled
  system.adapter.luftdaten.0              : luftdaten             : proxmox-iob-cont                         - disabled
  system.adapter.mqtt.0                   : mqtt                  : proxmox-iob-cont                         - disabled, port: 1883, bind: 192.168.1.204
  system.adapter.nina.0                   : nina                  : proxmox-iob-cont                         - disabled
  system.adapter.node-red.0               : node-red              : proxmox-iob-cont                         - disabled, port: 1880, bind: 0.0.0.0
  system.adapter.notification-manager.0   : notification-manager  : proxmox-iob-cont                         - disabled
  system.adapter.pi-hole.0                : pi-hole               : proxmox-iob-cont                         - disabled
  system.adapter.proxmox.0                : proxmox               : proxmox-iob-cont                         - disabled, port: 8006
  system.adapter.pushover.0               : pushover              : proxmox-iob-cont                         - disabled
  system.adapter.radar2.0                 : radar2                : proxmox-iob-cont                         - disabled
  system.adapter.senec.0                  : senec                 : proxmox-iob-cont                         - disabled
+ system.adapter.shelly.0                 : shelly                : proxmox-iob-cont                         -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : proxmox-iob-cont                         -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.sonoff.0                 : sonoff                : proxmox-iob-cont                         - disabled, port: 1883, bind: 0.0.0.0
  system.adapter.statistics.0             : statistics            : proxmox-iob-cont                         - disabled
  system.adapter.telegram.0               : telegram              : proxmox-iob-cont                         - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.tr-064.0                 : tr-064                : proxmox-iob-cont                         - disabled
  system.adapter.trashschedule.0          : trashschedule         : proxmox-iob-cont                         - disabled
+ system.adapter.vis-2.0                  : vis-2                 : proxmox-iob-cont                         -  enabled
  system.adapter.vis.0                    : vis                   : proxmox-iob-cont                         -  enabled
+ system.adapter.web.0                    : web                   : proxmox-iob-cont                         -  enabled, port: 8082, bind: 192.168.1.204, run as: admin
+ system.adapter.wled.0                   : wled                  : proxmox-iob-cont                         -  enabled
  system.adapter.worx.0                   : worx                  : proxmox-iob-cont                         - disabled
+ system.adapter.zigbee2mqtt.0            : zigbee2mqtt           : proxmox-iob-cont                         -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : proxmox-iob-cont                         -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.shelly.0                 : shelly                : proxmox-iob-cont                         -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : proxmox-iob-cont                         -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : proxmox-iob-cont                         -  enabled, port: 8082, bind: 192.168.1.204, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 7.4.10   , installed 7.4.10
Adapter    "awtrix-light" : 1.4.1    , installed 1.4.1
Adapter    "backitup"     : 3.0.31   , installed 3.0.31
Adapter    "hm-rpc"       : 2.0.2    , installed 2.0.2
Adapter    "hue"          : 3.13.1   , installed 3.13.1
Adapter    "ical"         : 1.16.1   , installed 1.16.1
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "kecontact"    : 2.3.0    , installed 2.3.0
Adapter    "lgtv"         : 2.4.0    , installed 2.4.0
Adapter    "luftdaten"    : 4.0.0    , installed 4.0.0
Adapter    "mqtt"         : 6.1.2    , installed 6.1.2
Adapter    "nina"         : 0.0.25   , installed 0.0.25
Adapter    "node-red"     : 5.2.1    , installed 5.2.1
Adapter    "notification-manager": 1.2.1, installed 1.2.1
Adapter    "pi-hole"      : 1.3.6    , installed 1.3.6
Adapter    "proxmox"      : 2.3.0    , installed 2.3.0
Adapter    "pushover"     : 4.1.0    , installed 4.1.0
Adapter    "radar2"       : 2.2.0    , installed 2.2.0
Adapter    "senec"        : 1.6.17   , installed 1.6.17
Adapter    "shelly"       : 8.5.1    , installed 8.5.1
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "sonoff"       : 3.1.2    , installed 3.1.2
Adapter    "statistics"   : 2.4.0    , installed 2.4.0
Adapter    "telegram"     : 4.0.0    , installed 4.0.0
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "trashschedule": 3.3.0    , installed 3.3.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.9.64   , installed 2.9.64
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "wled"         : 0.7.2    , installed 0.7.2
Adapter    "worx"         : 3.1.1    , installed 3.1.1
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "zigbee2mqtt"  : 3.0.2    , installed 3.0.2

Objects and States
Please stand by - This may take a while
Objects:        1627
States:         788

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org bookworm-security InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          33818891   294/master
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       33819160   368/io.shelly.1
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          33818664   1/init
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       33813406   130/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       33814273   130/iobroker.js-con
tcp        0      0 192.168.1.204:8082      0.0.0.0:*               LISTEN      1001       33822791   402/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       33815300   308/io.admin.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          33813257   1/init
tcp6       0      0 :::111                  :::*                    LISTEN      0          33818666   1/init
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          33818892   294/master
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          33818665   1/init
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       33822947   449/io.wled.0
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       33819688   349/io.shelly.0
udp6       0      0 :::111                  :::*                                0          33818667   1/init

*** Log File - Last 25 Lines ***

2025-02-16 16:09:14.131  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 16:13:00.066  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24,"linkquality":102,"temperature":27,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:14:36.771  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/zigbee_door1', payload '{"battery":100,"contact":false,"device_temperature":24,"linkquality":102,"power_outage_count":2593,"trigger_count":11,"voltage":3145}'
2025-02-16 16:14:40.234  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/zigbee_door1', payload '{"battery":100,"contact":true,"device_temperature":24,"linkquality":76,"power_outage_count":2593,"trigger_count":11,"voltage":3145}'
2025-02-16 16:15:33.665  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/zigbee_door1', payload '{"battery":100,"contact":false,"device_temperature":24,"linkquality":61,"power_outage_count":2593,"trigger_count":11,"voltage":3145}'
2025-02-16 16:15:38.771  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/zigbee_door1', payload '{"battery":100,"contact":true,"device_temperature":24,"linkquality":65,"power_outage_count":2593,"trigger_count":11,"voltage":3145}'
2025-02-16 16:20:31.749  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24,"linkquality":105,"temperature":26.8,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:20:31.751  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.6,"linkquality":105,"temperature":26.8,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:24:14.136  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 16:39:14.143  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 16:46:04.944  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.6,"linkquality":105,"temperature":26.2,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:47:23.711  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/zigbee_door1', payload '{"battery":100,"contact":false,"device_temperature":24,"linkquality":61,"power_outage_count":2593,"trigger_count":11,"voltage":3145}'
2025-02-16 16:50:36.147  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.6,"linkquality":105,"temperature":26.1,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:50:36.151  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.5,"linkquality":102,"temperature":26.1,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:50:36.153  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.5,"linkquality":105,"temperature":26.1,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:54:14.150  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 17:07:08.170  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.5,"linkquality":120,"temperature":25.4,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 17:09:14.155  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 17:20:39.869  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.5,"linkquality":120,"temperature":25,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 17:20:39.870  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":25.5,"linkquality":120,"temperature":25,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 17:24:14.160  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 17:37:35.592  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/zigbee_door1', payload '{"battery":100,"contact":false,"device_temperature":23,"linkquality":94,"power_outage_count":2593,"trigger_count":10,"voltage":3145}'
2025-02-16 17:39:14.168  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 17:50:42.352  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":28.7,"linkquality":123,"temperature":25,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 17:54:14.173  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device

```**Bitte in der nachfolgenden Übersicht die mit ... bzw x gekennzeichneten Felder ausfüllen und im Anschluss an die Tabelle auf Linux Systemen den Output des Commands *iob diag* einfügen.**

**Hinweis:** Das Eröffnen eines Issues hier ersetzt NICHT das Anlegen eine Issues im Repository des Adapters. Fehlerbehebungen werden ausschließlich über Issues getrackt.

**DANKE**

**Bitte ausfüllen:**

- Adaptername: ...
- Link zu Adapterrepository: www.github.com...
- Adapterversion:  ...
- js-controller Version:  ...
- Admin Version:  ...
- Hardwaresystem: NUC,  Pi4 ...
- Arbeitsspeicher:  ...xGB
- Festplattenart: SD-Karte, SSD, HDD, ...
- Betriebssystem:  ...
- Nodejs-Version:  ...
- NPM-Version:  ...
- Installationsart: Skript oder Manuell ?
- Image,  Docker genutzt: Ja - Nein
- Ort, Name der Imagedatei: ...

Linux User bitte hier den Output von *iob diag* einfügen.Hallo community,
Ich bin gerade am Umziehen meines Produktivsystems von Proxmox VM in einen Container.
Dabei läuft zur Zeit nur der Admin und ich habe mit zigbee angefangen zu konfigurieren -.
Ich möchte zukünftig auf zigbee2mqtt setzen (inklusive eines LAN-Coordinators)
Die Installation des Coordinators unter zigbee2mqtt ist abgeschlossen und ich habe auch 3 Geräte am Coordinatror angemeldet.
Die WebGui von zigbee2mqtt läuft und auch der zigbee2mqtt Adapter im iobroker läuft.
Es werden auch states published (kann ich im logfile des zigbee Servers sehen)
Allerdings sind alle meine drei Geräte nicht aktiv.
![0_1739725623178_z2m.jpg](Lade 100% hoch) 

- Adaptername: zigbee2mqtt
- Link zu Adapterrepository: https://github.com/arteck/ioBroker.zigbee2mqtt
- Adapterversion:  3.0.2
- js-controller Version:  7.0.6
- Admin Version:  7.4.10
- Hardwaresystem: Proxmox  AMD Ryzen 5
- Arbeitsspeicher:  12GB
- Festplattenart: 100GbB SSD
- Betriebssystem:  Linux Debian
- Nodejs-Version:  20.18.3
- NPM-Version:  10.8.2
- Installationsart: Skript 
- Image,  Docker genutzt: Nein
- Ort, Name der Imagedatei: -

```bash
Script v.2025-02-02

*** BASE SYSTEM ***
 Static hostname: proxmox-iob-cont
       Icon name: computer-container
         Chassis: container ☐
  Virtualization: lxc
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.8.12-8-pve
    Architecture: x86-64
OS is similar to:

model name      : AMD Ryzen 5 PRO 2500U w/ Radeon Vega Mobile Gfx
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 17:57:01 up  6:03,  2 users,  load average: 4.34, 4.94, 5.02
CPU threads: 4


*** LIFE CYCLE STATUS ***
Unknown release codenamed ''. Please check yourself if the Operating System is actively maintained.

*** TIME AND TIMEZONES ***
               Local time: Sun 2025-02-16 17:57:01 CET
           Universal time: Sun 2025-02-16 16:57:01 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: inactive
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi users iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:             12G        596M         11G        131K        444M         11G
Swap:           4.2G          0B        4.2G
Total:           16G        596M         15G

Active iob-Instances:   8

        12000 M total memory
          569 M used memory
          687 M active memory
          262 M inactive memory
        11005 M free memory
            0 M buffer memory
          424 M swap cache
         4000 M total swap
            0 M used swap
         4000 M free swap

*** top - Table Of Processes  ***
top - 17:57:02 up  6:03,  2 users,  load average: 4.34, 4.94, 5.02
Tasks:  36 total,   1 running,  35 sleeping,   0 stopped,   0 zombie
%Cpu(s): 33.3 us, 16.7 sy,  0.0 ni, 33.3 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :  12000.0 total,  11003.6 free,    571.8 used,    424.8 buff/cache
MiB Swap:   4000.0 total,   4000.0 free,      0.0 used.  11428.2 avail Mem

*** FAILED SERVICES ***

  UNIT                 LOAD   ACTIVE SUB    DESCRIPTION
* run-rpc_pipefs.mount loaded failed failed RPC Pipe File System

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.


*** DMESG CRITICAL ERRORS ***
dmesg: read kernel buffer failed: Operation not permitted
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/loop1     ext4       98G  5.3G   88G   6% /
none           tmpfs     492K  4.0K  488K   1% /dev
udev           devtmpfs   32G     0   32G   0% /dev/tty
tmpfs          tmpfs      32G     0   32G   0% /dev/shm
tmpfs          tmpfs      13G  124K   13G   1% /run
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs     6.3G     0  6.3G   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET SOURCE     FSTYPE OPTIONS
/      /dev/loop1 ext4   rw,relatime

Files in neuralgic directories:

/var:
450M    /var/
249M    /var/cache
245M    /var/cache/apt
170M    /var/cache/apt/archives
147M    /var/lib

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 11.9M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.2G    /opt/iobroker/iobroker-data/
1.1G    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.3
/usr/bin/node           v20.18.3
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.30.0

nodejs:
  Installed: 20.18.3-1nodesource1
  Candidate: 20.18.3-1nodesource1
  Version table:
 *** 20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main amd64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://security.debian.org bookworm-security/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
proxmox-iob-cont    proxmox-iob-cont (version: 7.0.6, hostname: proxmox-iob-cont, alive, uptime: 21783)

Core adapters versions
js-controller:  7.0.6
admin:          7.4.10
javascript:     8.8.3

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : proxmox-iob-cont                         -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.awtrix-light.0           : awtrix-light          : proxmox-iob-cont                         - disabled
  system.adapter.backitup.0               : backitup              : proxmox-iob-cont                         - disabled
  system.adapter.hm-rpc.0                 : hm-rpc                : proxmox-iob-cont                         - disabled, port: 0
  system.adapter.hue.0                    : hue                   : proxmox-iob-cont                         - disabled, port: 443
  system.adapter.ical.0                   : ical                  : proxmox-iob-cont                         - disabled
  system.adapter.ical.1                   : ical                  : proxmox-iob-cont                         - disabled
  system.adapter.influxdb.0               : influxdb              : proxmox-iob-cont                         - disabled, port: 8086
  system.adapter.iot.0                    : iot                   : proxmox-iob-cont                         - disabled
  system.adapter.jarvis.0                 : jarvis                : proxmox-iob-cont                         - disabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.javascript.0             : javascript            : proxmox-iob-cont                         - disabled
  system.adapter.kecontact.0              : kecontact             : proxmox-iob-cont                         - disabled
  system.adapter.lgtv.0                   : lgtv                  : proxmox-iob-cont                         - disabled
  system.adapter.luftdaten.0              : luftdaten             : proxmox-iob-cont                         - disabled
  system.adapter.mqtt.0                   : mqtt                  : proxmox-iob-cont                         - disabled, port: 1883, bind: 192.168.1.204
  system.adapter.nina.0                   : nina                  : proxmox-iob-cont                         - disabled
  system.adapter.node-red.0               : node-red              : proxmox-iob-cont                         - disabled, port: 1880, bind: 0.0.0.0
  system.adapter.notification-manager.0   : notification-manager  : proxmox-iob-cont                         - disabled
  system.adapter.pi-hole.0                : pi-hole               : proxmox-iob-cont                         - disabled
  system.adapter.proxmox.0                : proxmox               : proxmox-iob-cont                         - disabled, port: 8006
  system.adapter.pushover.0               : pushover              : proxmox-iob-cont                         - disabled
  system.adapter.radar2.0                 : radar2                : proxmox-iob-cont                         - disabled
  system.adapter.senec.0                  : senec                 : proxmox-iob-cont                         - disabled
+ system.adapter.shelly.0                 : shelly                : proxmox-iob-cont                         -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : proxmox-iob-cont                         -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.sonoff.0                 : sonoff                : proxmox-iob-cont                         - disabled, port: 1883, bind: 0.0.0.0
  system.adapter.statistics.0             : statistics            : proxmox-iob-cont                         - disabled
  system.adapter.telegram.0               : telegram              : proxmox-iob-cont                         - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.tr-064.0                 : tr-064                : proxmox-iob-cont                         - disabled
  system.adapter.trashschedule.0          : trashschedule         : proxmox-iob-cont                         - disabled
+ system.adapter.vis-2.0                  : vis-2                 : proxmox-iob-cont                         -  enabled
  system.adapter.vis.0                    : vis                   : proxmox-iob-cont                         -  enabled
+ system.adapter.web.0                    : web                   : proxmox-iob-cont                         -  enabled, port: 8082, bind: 192.168.1.204, run as: admin
+ system.adapter.wled.0                   : wled                  : proxmox-iob-cont                         -  enabled
  system.adapter.worx.0                   : worx                  : proxmox-iob-cont                         - disabled
+ system.adapter.zigbee2mqtt.0            : zigbee2mqtt           : proxmox-iob-cont                         -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : proxmox-iob-cont                         -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.shelly.0                 : shelly                : proxmox-iob-cont                         -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : proxmox-iob-cont                         -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : proxmox-iob-cont                         -  enabled, port: 8082, bind: 192.168.1.204, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 7.4.10   , installed 7.4.10
Adapter    "awtrix-light" : 1.4.1    , installed 1.4.1
Adapter    "backitup"     : 3.0.31   , installed 3.0.31
Adapter    "hm-rpc"       : 2.0.2    , installed 2.0.2
Adapter    "hue"          : 3.13.1   , installed 3.13.1
Adapter    "ical"         : 1.16.1   , installed 1.16.1
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "jarvis"       : 3.1.8    , installed 3.1.8
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "kecontact"    : 2.3.0    , installed 2.3.0
Adapter    "lgtv"         : 2.4.0    , installed 2.4.0
Adapter    "luftdaten"    : 4.0.0    , installed 4.0.0
Adapter    "mqtt"         : 6.1.2    , installed 6.1.2
Adapter    "nina"         : 0.0.25   , installed 0.0.25
Adapter    "node-red"     : 5.2.1    , installed 5.2.1
Adapter    "notification-manager": 1.2.1, installed 1.2.1
Adapter    "pi-hole"      : 1.3.6    , installed 1.3.6
Adapter    "proxmox"      : 2.3.0    , installed 2.3.0
Adapter    "pushover"     : 4.1.0    , installed 4.1.0
Adapter    "radar2"       : 2.2.0    , installed 2.2.0
Adapter    "senec"        : 1.6.17   , installed 1.6.17
Adapter    "shelly"       : 8.5.1    , installed 8.5.1
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "sonoff"       : 3.1.2    , installed 3.1.2
Adapter    "statistics"   : 2.4.0    , installed 2.4.0
Adapter    "telegram"     : 4.0.0    , installed 4.0.0
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "trashschedule": 3.3.0    , installed 3.3.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.9.64   , installed 2.9.64
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "wled"         : 0.7.2    , installed 0.7.2
Adapter    "worx"         : 3.1.1    , installed 3.1.1
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "zigbee2mqtt"  : 3.0.2    , installed 3.0.2

Objects and States
Please stand by - This may take a while
Objects:        1627
States:         788

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org bookworm-security InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          33818891   294/master
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       33819160   368/io.shelly.1
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          33818664   1/init
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       33813406   130/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       33814273   130/iobroker.js-con
tcp        0      0 192.168.1.204:8082      0.0.0.0:*               LISTEN      1001       33822791   402/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       33815300   308/io.admin.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          33813257   1/init
tcp6       0      0 :::111                  :::*                    LISTEN      0          33818666   1/init
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          33818892   294/master
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          33818665   1/init
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       33822947   449/io.wled.0
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       33819688   349/io.shelly.0
udp6       0      0 :::111                  :::*                                0          33818667   1/init

*** Log File - Last 25 Lines ***

2025-02-16 16:09:14.131  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 16:13:00.066  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24,"linkquality":102,"temperature":27,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:14:36.771  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/zigbee_door1', payload '{"battery":100,"contact":false,"device_temperature":24,"linkquality":102,"power_outage_count":2593,"trigger_count":11,"voltage":3145}'
2025-02-16 16:14:40.234  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/zigbee_door1', payload '{"battery":100,"contact":true,"device_temperature":24,"linkquality":76,"power_outage_count":2593,"trigger_count":11,"voltage":3145}'
2025-02-16 16:15:33.665  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/zigbee_door1', payload '{"battery":100,"contact":false,"device_temperature":24,"linkquality":61,"power_outage_count":2593,"trigger_count":11,"voltage":3145}'
2025-02-16 16:15:38.771  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/zigbee_door1', payload '{"battery":100,"contact":true,"device_temperature":24,"linkquality":65,"power_outage_count":2593,"trigger_count":11,"voltage":3145}'
2025-02-16 16:20:31.749  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24,"linkquality":105,"temperature":26.8,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:20:31.751  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.6,"linkquality":105,"temperature":26.8,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:24:14.136  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 16:39:14.143  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 16:46:04.944  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.6,"linkquality":105,"temperature":26.2,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:47:23.711  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/zigbee_door1', payload '{"battery":100,"contact":false,"device_temperature":24,"linkquality":61,"power_outage_count":2593,"trigger_count":11,"voltage":3145}'
2025-02-16 16:50:36.147  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.6,"linkquality":105,"temperature":26.1,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:50:36.151  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.5,"linkquality":102,"temperature":26.1,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:50:36.153  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.5,"linkquality":105,"temperature":26.1,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 16:54:14.150  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 17:07:08.170  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.5,"linkquality":120,"temperature":25.4,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 17:09:14.155  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 17:20:39.869  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":24.5,"linkquality":120,"temperature":25,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 17:20:39.870  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":25.5,"linkquality":120,"temperature":25,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 17:24:14.160  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 17:37:35.592  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/zigbee_door1', payload '{"battery":100,"contact":false,"device_temperature":23,"linkquality":94,"power_outage_count":2593,"trigger_count":10,"voltage":3145}'
2025-02-16 17:39:14.168  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device
2025-02-16 17:50:42.352  - info: zigbee2mqtt.0 (622) z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/tuya_temp_hum_1', payload '{"battery":100,"humidity":28.7,"linkquality":123,"temperature":25,"update":{"installed_version":268513281,"latest_version":268513281,"state":"idle"}}'
2025-02-16 17:54:14.173  - debug: shelly.1 (368) [firmwareNotify] Starting firmware check on every device

crepp1967

@asgothian
Danke schon mal für den Denkansatz, ich schau jetzt erst mal Olympia u werde es morgen testen.

Gruß
Torsten

crepp1967

Hallo Gemeinde,

Ich habe einen Anwendungsfall den ich wohl nicht ohne Hilfe lösen kann:
Ich möchte eine Pumpe steuern (Laufzeit 10min) aber auch manuell abbrechen können.
Das klingt einfach, ich habe es aber durch stundenlanges Versuchen bis jetzt nicht hinbekommen.
Es wäre toll wenn ich den entscheidenden Hinweis hier bekommen könnte.
Die Pumpe wird durch einen manuell angelegten userdata Punkt gesteuert. (Pumpe IBC)
Der Zeit-Teil (10min) funktioniert. Das manuelle Abbrechen jedoch nicht...
Gruß
Torsten

NEWS

crepp1967

@crepp1967

Best posts made by crepp1967

Latest posts made by crepp1967