@rewell

Hab die Lösung.... habe eine eigene Tasmota Firmware kompiliert in dieser wird der Sensor von IKEA Vindriktining unterstützt.

Die Tasmota Version ist die 9.5.0.7 und ist aus dem development tree.

Einfach die Firmware auf den WEMOS Mini D1 uploaden und als Generic konfigurieren und unter GPIO 2 wählst du den Vindriktining Sensor aus.

im iobroker installierst du den SONOFF Adapter der hat einen MQTT Server integriert, den muss du nach deiner Vorliebe konfigurieren, diese Daten gibst du dann in TAsmosa unter den MQTT Einstellungen ein. Somit landen die Daten im iobroker

zur info Tasmota beinhaltet seit paar Tagen die Unterstützung für den Sensor, diesen muss man aber bei kompilieren aktivieren. das habe ich in dieser angehängten Firmware gemacht.

Viel Spass beim umsetzen, solltest du noch fragen haben melde dich einfach

firmware_ikea_ Vindriktining.bin

@a200:

2. Der Lesekopf ist ein HAGER EHZ001K https://www.hager.de/zaehlerplatzsystem … #Downloads Der rückseitig verbaut ist. Mit dem Udo-Kopf hatte ich auf der Vorderseite die standard OBIS Informationen ausgelesen. `

Hallo a200

Wie hast du denn die Schnittstelle an iobroker angeschlossen? Ich habe nämlich einen EMH Zähler und bei mir ist die Schnittstelle auch verbaut, würde die auch gern abgreifen, kannst du mir ein Tip geben

Vielen dank in voraus

Gruß

Adrian

@rewell

Hab die Lösung.... habe eine eigene Tasmota Firmware kompiliert in dieser wird der Sensor von IKEA Vindriktining unterstützt.

Die Tasmota Version ist die 9.5.0.7 und ist aus dem development tree.

Einfach die Firmware auf den WEMOS Mini D1 uploaden und als Generic konfigurieren und unter GPIO 2 wählst du den Vindriktining Sensor aus.

im iobroker installierst du den SONOFF Adapter der hat einen MQTT Server integriert, den muss du nach deiner Vorliebe konfigurieren, diese Daten gibst du dann in TAsmosa unter den MQTT Einstellungen ein. Somit landen die Daten im iobroker

zur info Tasmota beinhaltet seit paar Tagen die Unterstützung für den Sensor, diesen muss man aber bei kompilieren aktivieren. das habe ich in dieser angehängten Firmware gemacht.

Viel Spass beim umsetzen, solltest du noch fragen haben melde dich einfach

firmware_ikea_ Vindriktining.bin

kann man die irgendwo bestellten?

Alles schon probiert

das Debuglog sieht wie folgt aus

2020-06-27 21:41:20.727 - debug: shelly.0 (15228) CoAP data ignored: {"3332":"SHSW-25#BCDDC277671C#1","3412":38400,"3420":15105,"Uri-Path":"cit/s"} / {"G":[[0,112,0],[0,122,0],[0,111,0.000000],[0,121,0.000000],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0.000],[0,212,0.000],[0,213,0.000],[0,214,0],[0,221,0.000],[0,222,0.000],[0,223,0.000],[0,224,0]]}
2020-06-27 21:41:21.017 - debug: shelly.0 (15228) CoAP status package received: {"3332":"SHSW-PM#BA1CB0#1","3412":38400,"3420":58369,"Uri-Path":"cit/s"} / {"G":[[0,111,1839.87],[0,112,1],[0,113,63.13],[0,114,145.63],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]}
2020-06-27 21:41:21.018 - debug: shelly.0 (15228) Status update received for SHSW-PM#BA1CB0#1: {"G":[[0,111,1839.87],[0,112,1],[0,113,63.13],[0,114,145.63],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]}
2020-06-27 21:41:21.018 - debug: shelly.0 (15228) CoAP device description request for SHSW-PM#BA1CB0#1 to 10.0.0.31(0)
2020-06-27 21:41:21.018 - debug: shelly.0 (15228) CoAP Message for SHSW-PM#BA1CB0#1 : {"G":[[0,111,1839.87],[0,112,1],[0,113,63.13],[0,114,145.63],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]}
2020-06-27 21:41:21.018 - debug: shelly.0 (15228) Create State : SHSW-PM#BA1CB0#1.Relay0.Switch, Payload: {"G":[[0,111,1839.87],[0,112,1],[0,113,63.13],[0,114,145.63],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]} for SHSW-PM#BA1CB0#1
2020-06-27 21:41:21.018 - debug: shelly.0 (15228) Create State : SHSW-PM#BA1CB0#1.Relay0.Switch, Payload: [object Object] for SHSW-PM#BA1CB0#1
2020-06-27 21:41:21.034 - debug: shelly.0 (15228) CoAP response: {"3332":"SHSW-PM#BA1CB0#1"}
2020-06-27 21:41:21.034 - debug: shelly.0 (15228) Device description received: {"3332":"SHSW-PM#BA1CB0#1"} / {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Sensors"}],"sen":[{"I":111,"T":"P","D":"Power","R":"0/3500","L":0},{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":113,"T":"T","D":"Temperature C","R":"-40/300","L":0},{"I":114,"T":"T","D":"Temperature F","R":"-40/300","L":0},{"I":115,"T":"S","D":"Overtemp","R":"0/1","L":0},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0}]}
2020-06-27 21:41:21.922 - info: host.iobroker stopInstance system.adapter.shelly.0 (force=false, process=true)
2020-06-27 21:41:21.924 - info: host.iobroker stopInstance system.adapter.shelly.0 send kill signal
2020-06-27 21:41:21.926 - info: shelly.0 (15228) Got terminate signal TERMINATE_YOURSELF
2020-06-27 21:41:21.926 - info: shelly.0 (15228) Closing Adapter
2020-06-27 21:41:21.927 - info: shelly.0 (15228) terminating
2020-06-27 21:41:21.927 - debug: shelly.0 (15228) Plugin sentry destroyed
2020-06-27 21:41:21.927 - info: shelly.0 (15228) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2020-06-27 21:41:22.451 - info: host.iobroker instance system.adapter.shelly.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2020-06-27 21:41:24.960 - info: host.iobroker instance system.adapter.shelly.0 started with pid 6740
2020-06-27 21:41:25.250 - debug: shelly.0 (6740) Redis Objects: Use Redis connection: 127.0.0.1:9001
2020-06-27 21:41:25.262 - debug: shelly.0 (6740) Objects client ready ... initialize now
2020-06-27 21:41:25.263 - debug: shelly.0 (6740) Objects create System PubSub Client
2020-06-27 21:41:25.263 - debug: shelly.0 (6740) Objects create User PubSub Client
2020-06-27 21:41:25.266 - debug: shelly.0 (6740) Objects client initialize lua scripts
2020-06-27 21:41:25.277 - debug: shelly.0 (6740) Objects connected to redis: 127.0.0.1:9001
2020-06-27 21:41:25.278 - debug: shelly.0 (6740) objectDB connected
2020-06-27 21:41:25.279 - debug: shelly.0 (6740) Redis States: Use Redis connection: 127.0.0.1:9000
2020-06-27 21:41:25.285 - debug: shelly.0 (6740) States create User PubSub Client
2020-06-27 21:41:25.286 - debug: shelly.0 (6740) States create System PubSub Client
2020-06-27 21:41:25.295 - debug: shelly.0 (6740) States connected to redis: 127.0.0.1:9000
2020-06-27 21:41:25.296 - debug: shelly.0 (6740) statesDB connected
2020-06-27 21:41:25.567 - debug: shelly.0 (6740) Plugin sentry Initialize Plugin (enabled=true)
2020-06-27 21:41:25.648 - info: shelly.0 (6740) starting. Version 3.3.4 in /opt/iobroker/node_modules/iobroker.shelly, node: v12.18.1, js-controller: 3.1.6
2020-06-27 21:41:25.656 - info: shelly.0 (6740) Starting Adapter shelly.0 in version 3.3.4
2020-06-27 21:41:25.656 - info: shelly.0 (6740) Polltime of the shelly devices: 10 sec.
2020-06-27 21:41:25.663 - info: shelly.0 (6740) Starting Shelly adapter in CoAP modus.
2020-06-27 21:41:25.678 - info: shelly.0 (6740) Listening for Shelly packets in the network
2020-06-27 21:41:30.393 - debug: shelly.0 (6740) CoAP status package received: {"3332":"SHSW-25#68C63AF908FF#1","3412":38400,"3420":26113,"Uri-Path":"cit/s"} / {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]}
2020-06-27 21:41:30.394 - debug: shelly.0 (6740) Status update received for SHSW-25#68C63AF908FF#1: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]}
2020-06-27 21:41:30.394 - debug: shelly.0 (6740) CoAP device description request for SHSW-25#68C63AF908FF#1 to 10.0.0.30(0)
2020-06-27 21:41:30.421 - debug: shelly.0 (6740) CoAP response: {"3332":"SHSW-25#68C63AF908FF#1"}
2020-06-27 21:41:30.422 - debug: shelly.0 (6740) Device description received: {"3332":"SHSW-25#68C63AF908FF#1"} / {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Relay1"},{"I":2,"D":"Device"}],"sen":[{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":122,"T":"S","D":"State","R":"0/1","L":1},{"I":111,"T":"P","D":"Power","R":"0/2300","L":0},{"I":121,"T":"P","D":"Power","R":"0/2300","L":1},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":128,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":1},{"I":115,"T":"T","D":"Temperature C","R":"-40/300","L":2},{"I":116,"T":"T","D":"Temperature F","R":"-40/300","L":2},{"I":117,"T":"S","D":"Overtemp","R":"0/1","L":2},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0},{"I":221,"T":"S","D":"Energy counter 0 [W-min]","L":1},{"I":222,"T":"S","D":"Energy counter 1 [W-min]","L":1},{"I":223,"T":"S","D":"Energy counter 2 [W-min]","L":1},{"I":224,"T":"S","D":"Energy counter total [W-min]","L":1}]}
2020-06-27 21:41:30.422 - info: shelly.0 (6740) Shelly device 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1) with CoAP connected!
2020-06-27 21:41:30.422 - debug: shelly.0 (6740) 1. Shelly device Info: SHSW-25#68C63AF908FF#1 : {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Relay1"},{"I":2,"D":"Device"}],"sen":[{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":122,"T":"S","D":"State","R":"0/1","L":1},{"I":111,"T":"P","D":"Power","R":"0/2300","L":0},{"I":121,"T":"P","D":"Power","R":"0/2300","L":1},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":128,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":1},{"I":115,"T":"T","D":"Temperature C","R":"-40/300","L":2},{"I":116,"T":"T","D":"Temperature F","R":"-40/300","L":2},{"I":117,"T":"S","D":"Overtemp","R":"0/1","L":2},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0},{"I":221,"T":"S","D":"Energy counter 0 [W-min]","L":1},{"I":222,"T":"S","D":"Energy counter 1 [W-min]","L":1},{"I":223,"T":"S","D":"Energy counter 2 [W-min]","L":1},{"I":224,"T":"S","D":"Energy counter total [W-min]","L":1}]}
2020-06-27 21:41:30.423 - debug: shelly.0 (6740) 2. Shelly device Info: SHSW-25#68C63AF908FF#1 : {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]}
2020-06-27 21:41:30.428 - debug: shelly.0 (6740) CoAP Message for SHSW-25#68C63AF908FF#1 : {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]}
2020-06-27 21:41:30.429 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Switch, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:30.429 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Switch, Payload: [object Object] for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:30.429 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Relay0.Switch, Value: true for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1)
2020-06-27 21:41:30.429 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Power, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:30.430 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Power, Payload: [object Object] for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:30.430 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Relay0.Power, Value: 8.08 for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1)
2020-06-27 21:41:30.430 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Switch, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:30.430 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Switch, Payload: [object Object] for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:30.430 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Relay1.Switch, Value: true for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1)
2020-06-27 21:41:30.430 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Power, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:30.430 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Power, Payload: [object Object] for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:30.430 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Relay1.Power, Value: 175.62 for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1)
2020-06-27 21:41:30.431 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.state, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:30.431 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.state, Payload: [object Object] for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:30.431 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Shutter.state, Value: "open" for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1)
2020-06-27 21:41:30.431 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.Position, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:30.431 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.Position, Payload: [object Object] for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:30.431 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Shutter.Position, Value: null for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1)
2020-06-27 21:41:35.734 - debug: shelly.0 (6740) CoAP status package received: {"3332":"SHSW-25#BCDDC277671C#1","3412":38400,"3420":15105,"Uri-Path":"cit/s"} / {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]}
2020-06-27 21:41:35.735 - debug: shelly.0 (6740) Status update received for SHSW-25#BCDDC277671C#1: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]}
2020-06-27 21:41:35.735 - debug: shelly.0 (6740) CoAP device description request for SHSW-25#BCDDC277671C#1 to 10.0.0.29(0)
2020-06-27 21:41:35.736 - debug: shelly.0 (6740) Connection update received for SHSW-25#BCDDC277671C#1: true
2020-06-27 21:41:35.768 - debug: shelly.0 (6740) CoAP response: {"3332":"SHSW-25#BCDDC277671C#1"}
2020-06-27 21:41:35.768 - debug: shelly.0 (6740) Device description received: {"3332":"SHSW-25#BCDDC277671C#1"} / {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Relay1"},{"I":2,"D":"Device"}],"sen":[{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":122,"T":"S","D":"State","R":"0/1","L":1},{"I":111,"T":"P","D":"Power","R":"0/2300","L":0},{"I":121,"T":"P","D":"Power","R":"0/2300","L":1},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":128,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":1},{"I":115,"T":"T","D":"Temperature C","R":"-40/300","L":2},{"I":116,"T":"T","D":"Temperature F","R":"-40/300","L":2},{"I":117,"T":"S","D":"Overtemp","R":"0/1","L":2},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0},{"I":221,"T":"S","D":"Energy counter 0 [W-min]","L":1},{"I":222,"T":"S","D":"Energy counter 1 [W-min]","L":1},{"I":223,"T":"S","D":"Energy counter 2 [W-min]","L":1},{"I":224,"T":"S","D":"Energy counter total [W-min]","L":1}]}
2020-06-27 21:41:35.769 - info: shelly.0 (6740) Shelly device 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1) with CoAP connected!
2020-06-27 21:41:35.769 - debug: shelly.0 (6740) 1. Shelly device Info: SHSW-25#BCDDC277671C#1 : {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Relay1"},{"I":2,"D":"Device"}],"sen":[{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":122,"T":"S","D":"State","R":"0/1","L":1},{"I":111,"T":"P","D":"Power","R":"0/2300","L":0},{"I":121,"T":"P","D":"Power","R":"0/2300","L":1},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":128,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":1},{"I":115,"T":"T","D":"Temperature C","R":"-40/300","L":2},{"I":116,"T":"T","D":"Temperature F","R":"-40/300","L":2},{"I":117,"T":"S","D":"Overtemp","R":"0/1","L":2},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0},{"I":221,"T":"S","D":"Energy counter 0 [W-min]","L":1},{"I":222,"T":"S","D":"Energy counter 1 [W-min]","L":1},{"I":223,"T":"S","D":"Energy counter 2 [W-min]","L":1},{"I":224,"T":"S","D":"Energy counter total [W-min]","L":1}]}
2020-06-27 21:41:35.769 - debug: shelly.0 (6740) 2. Shelly device Info: SHSW-25#BCDDC277671C#1 : {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]}
2020-06-27 21:41:35.772 - debug: shelly.0 (6740) CoAP Message for SHSW-25#BCDDC277671C#1 : {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]}
2020-06-27 21:41:35.773 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay0.Switch, Payload: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} for SHSW-25#BCDDC277671C#1
2020-06-27 21:41:35.773 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay0.Switch, Payload: [object Object] for SHSW-25#BCDDC277671C#1
2020-06-27 21:41:35.773 - debug: shelly.0 (6740) State change : SHSW-25#BCDDC277671C#1.Relay0.Switch, Value: false for 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1)
2020-06-27 21:41:35.773 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay0.Power, Payload: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} for SHSW-25#BCDDC277671C#1
2020-06-27 21:41:35.773 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay0.Power, Payload: [object Object] for SHSW-25#BCDDC277671C#1
2020-06-27 21:41:35.773 - debug: shelly.0 (6740) State change : SHSW-25#BCDDC277671C#1.Relay0.Power, Value: 0 for 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1)
2020-06-27 21:41:35.773 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay1.Switch, Payload: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} for SHSW-25#BCDDC277671C#1
2020-06-27 21:41:35.774 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay1.Switch, Payload: [object Object] for SHSW-25#BCDDC277671C#1
2020-06-27 21:41:35.774 - debug: shelly.0 (6740) State change : SHSW-25#BCDDC277671C#1.Relay1.Switch, Value: false for 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1)
2020-06-27 21:41:35.774 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay1.Power, Payload: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} for SHSW-25#BCDDC277671C#1
2020-06-27 21:41:35.774 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay1.Power, Payload: [object Object] for SHSW-25#BCDDC277671C#1
2020-06-27 21:41:35.774 - debug: shelly.0 (6740) State change : SHSW-25#BCDDC277671C#1.Relay1.Power, Value: 0 for 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1)
2020-06-27 21:41:35.774 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Shutter.state, Payload: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} for SHSW-25#BCDDC277671C#1
2020-06-27 21:41:35.774 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Shutter.state, Payload: [object Object] for SHSW-25#BCDDC277671C#1
2020-06-27 21:41:35.774 - debug: shelly.0 (6740) State change : SHSW-25#BCDDC277671C#1.Shutter.state, Value: "stop" for 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1)
2020-06-27 21:41:35.774 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Shutter.Position, Payload: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} for SHSW-25#BCDDC277671C#1
2020-06-27 21:41:35.775 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Shutter.Position, Payload: [object Object] for SHSW-25#BCDDC277671C#1
2020-06-27 21:41:35.775 - debug: shelly.0 (6740) State change : SHSW-25#BCDDC277671C#1.Shutter.Position, Value: null for 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1)
2020-06-27 21:41:36.019 - debug: shelly.0 (6740) CoAP status package received: {"3332":"SHSW-PM#BA1CB0#1","3412":38400,"3420":58625,"Uri-Path":"cit/s"} / {"G":[[0,111,1834.04],[0,112,1],[0,113,63.07],[0,114,145.52],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]}
2020-06-27 21:41:36.019 - debug: shelly.0 (6740) Status update received for SHSW-PM#BA1CB0#1: {"G":[[0,111,1834.04],[0,112,1],[0,113,63.07],[0,114,145.52],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]}
2020-06-27 21:41:36.019 - debug: shelly.0 (6740) CoAP device description request for SHSW-PM#BA1CB0#1 to 10.0.0.31(0)
2020-06-27 21:41:36.020 - debug: shelly.0 (6740) Connection update received for SHSW-PM#BA1CB0#1: true
2020-06-27 21:41:36.020 - debug: shelly.0 (6740) Connection update received for SHSW-PM#BA1CB0#1: true
2020-06-27 21:41:36.112 - debug: shelly.0 (6740) CoAP response: {"3332":"SHSW-PM#BA1CB0#1"}
2020-06-27 21:41:36.112 - debug: shelly.0 (6740) Device description received: {"3332":"SHSW-PM#BA1CB0#1"} / {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Sensors"}],"sen":[{"I":111,"T":"P","D":"Power","R":"0/3500","L":0},{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":113,"T":"T","D":"Temperature C","R":"-40/300","L":0},{"I":114,"T":"T","D":"Temperature F","R":"-40/300","L":0},{"I":115,"T":"S","D":"Overtemp","R":"0/1","L":0},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0}]}
2020-06-27 21:41:36.112 - info: shelly.0 (6740) Shelly device 10.0.0.31 (shelly1pm / shelly1pm-BA1CB0 / SHSW-PM#BA1CB0#1) with CoAP connected!
2020-06-27 21:41:36.112 - debug: shelly.0 (6740) 1. Shelly device Info: SHSW-PM#BA1CB0#1 : {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Sensors"}],"sen":[{"I":111,"T":"P","D":"Power","R":"0/3500","L":0},{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":113,"T":"T","D":"Temperature C","R":"-40/300","L":0},{"I":114,"T":"T","D":"Temperature F","R":"-40/300","L":0},{"I":115,"T":"S","D":"Overtemp","R":"0/1","L":0},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0}]}
2020-06-27 21:41:36.112 - debug: shelly.0 (6740) 2. Shelly device Info: SHSW-PM#BA1CB0#1 : {"G":[[0,111,1834.04],[0,112,1],[0,113,63.07],[0,114,145.52],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]}
2020-06-27 21:41:36.116 - debug: shelly.0 (6740) CoAP Message for SHSW-PM#BA1CB0#1 : {"G":[[0,111,1834.04],[0,112,1],[0,113,63.07],[0,114,145.52],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]}
2020-06-27 21:41:36.116 - debug: shelly.0 (6740) Create State : SHSW-PM#BA1CB0#1.Relay0.Switch, Payload: {"G":[[0,111,1834.04],[0,112,1],[0,113,63.07],[0,114,145.52],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]} for SHSW-PM#BA1CB0#1
2020-06-27 21:41:36.116 - debug: shelly.0 (6740) Create State : SHSW-PM#BA1CB0#1.Relay0.Switch, Payload: [object Object] for SHSW-PM#BA1CB0#1
2020-06-27 21:41:36.116 - debug: shelly.0 (6740) State change : SHSW-PM#BA1CB0#1.Relay0.Switch, Value: true for 10.0.0.31 (shelly1pm / shelly1pm-BA1CB0 / SHSW-PM#BA1CB0#1)
2020-06-27 21:41:45.403 - debug: shelly.0 (6740) CoAP status package received: {"3332":"SHSW-25#68C63AF908FF#1","3412":38400,"3420":26369,"Uri-Path":"cit/s"} / {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]}
2020-06-27 21:41:45.403 - debug: shelly.0 (6740) Status update received for SHSW-25#68C63AF908FF#1: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]}
2020-06-27 21:41:45.403 - debug: shelly.0 (6740) CoAP device description request for SHSW-25#68C63AF908FF#1 to 10.0.0.30(0)
2020-06-27 21:41:45.404 - debug: shelly.0 (6740) CoAP Message for SHSW-25#68C63AF908FF#1 : {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]}
2020-06-27 21:41:45.404 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Switch, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:45.404 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Switch, Payload: [object Object] for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Power, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Power, Payload: [object Object] for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:45.405 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Relay0.Power, Value: 8.23 for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1)
2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Switch, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Switch, Payload: [object Object] for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Power, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Power, Payload: [object Object] for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:45.405 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Relay1.Power, Value: 176.19 for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1)
2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.state, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:45.406 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.state, Payload: [object Object] for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:45.406 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.Position, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:45.406 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.Position, Payload: [object Object] for SHSW-25#68C63AF908FF#1
2020-06-27 21:41:45.406 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Shutter.Position, Value: null for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1)
2020-06-27 21:41:45.466 - debug: shelly.0 (6740) CoAP response: {"3332":"SHSW-25#68C63AF908FF#1"}
2020-06-27 21:41:45.467 - debug: shelly.0 (6740) Device description received: {"3332":"SHSW-25#68C63AF908FF#1"} / {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Relay1"},{"I":2,"D":"Device"}],"sen":[{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":122,"T":"S","D":"State","R":"0/1","L":1},{"I":111,"T":"P","D":"Power","R":"0/2300","L":0},{"I":121,"T":"P","D":"Power","R":"0/2300","L":1},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":128,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":1},{"I":115,"T":"T","D":"Temperature C","R":"-40/300","L":2},{"I":116,"T":"T","D":"Temperature F","R":"-40/300","L":2},{"I":117,"T":"S","D":"Overtemp","R":"0/1","L":2},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0},{"I":221,"T":"S","D":"Energy counter 0 [W-min]","L":1},{"I":222,"T":"S","D":"Energy counter 1 [W-min]","L":1},{"I":223,"T":"S","D":"Energy counter 2 [W-min]","L":1},{"I":224,"T":"S","D":"Energy counter total [W-min]","L":1}]}

@harrym sagte in Shelly und die Energieanzeige:

http://10.0.0.31/status

Also hier tauchen die Werte auf, warum aber nicht in den Datenpunkten?

{"wifi_sta":{"connected":true,"ssid":"home.iot","ip":"10.0.0.31","rssi":-78},"cloud":{"enabled":true,"connected":true},"mqtt":{"connected":false},"time":"21:26","unixtime":1593293160,"serial":127,"has_update":false,"mac":"xxxxxxxxxxxx","relays" :[{"ison":true, "has_timer":false, "timer_started":0, "timer_duration":0, "timer_remaining":0, "overpower":false}],"meters":[{"power":1853.63,"is_valid":true,"timestamp":1593293160,"counters":[1845.457, 1849.325, 1841.731],"total":180600}],"inputs":[{"input":0,"event":"","event_cnt":0}],"ext_sensors":{},"ext_temperature":{},"ext_humidity":{},"temperature":63.19,"overtemperature":false,"tmp":{"tC":63.19,"tF":145.74, "is_valid":true},"update":{"status":"idle","has_update":false,"new_version":"20200601-123334/v1.7.0@d7961837","old_version":"20200601-123334/v1.7.0@d7961837"},"ram_total":49920,"ram_free":37916,"ram_lwm":32448,"fs_size":233681,"fs_free":152357,"uptime":6475}

Servus

meine Shelly's sind in einem separaten vlan -> 10.0.0.x/24
der iobroker befindet sich aber im selben Netz

Also ich habe inzwischen die Version von GIT installiert, brachte keine Verbesserung.

Adapter Version: 3.3.4
Firmware Shelly 1PM: 1.7.0

folgende Datenpunkte wurden angelegt

Ich schalte damit eine Steckdose (Pool) und die Pumpe läuft und verbraucht momentan 43 Watt in der App sehe ich das auch nur in iobroker wird nichts angezeigt

Danke

Gruß
Adrian

Es ist die aktuelle Firmware drauf und hängt an 230v also sollten die befüllt werden, werden aber nicht,

Hab den Developer des Adapters mal angeschrieben

Hallo zusammen

ich habe den neusten Shelly Adapter installiert und jetzt auch paar Shelly's im Garten verbaut, leider werden bei mir in iobroker die Energiedatenpunkte nicht befüllt. muss ich bei den Shelly's was einstellen damit das passiert?

Danke

Update: das ist nur bei dem Shelly 1PM, die anderen funktionieren.

Gruß
Adrian

Das gleiche Problem hatte ich auch. Dein Tip hat geholfen

Gruss
Adrian

GEILOMAT!!! Endlich eine VIS die mir super gefällt

Update: Zu früh gefreut die VIS funktioniert nicht richtig, sieht nur auf den ersten Blick gut aus kommt da noch was?

Gruß
Adrian