Shelly und die Energieanzeige
-
@simpixo Sorry, hatte ich niht dazu geschrieben. Ich nutze Adapter version 3.2.8
-
@klassisch dann mach mal ein update auf die 3.3.4 via git .....
-
@harrym Wird bei mir nicht angeboten. Bin konservativ auf default. Habe aber auch kein Problem, bei mir wird Energie angelegt und befüllt. @simpixo hat das Problem.
-
@klassisch eigentlich sollte die 3.3.3 auch schon via stable angeboten werden ... @Stuebi
-
@harrym 3.3.3 sehe ich in latest. Kann ich aber mal installieren
-
Also ich habe inzwischen die Version von GIT installiert, brachte keine Verbesserung.
Adapter Version: 3.3.4
Firmware Shelly 1PM: 1.7.0folgende Datenpunkte wurden angelegt
Ich schalte damit eine Steckdose (Pool) und die Pumpe läuft und verbraucht momentan 43 Watt in der App sehe ich das auch nur in iobroker wird nichts angezeigt
Danke
Gruß
Adrian -
@simpixo Bei mir ist folgende Firmware drauf: 20200309-104533/v1.6.0@43056d58
Hast Du vielleicht mit der App auf MQTT umgestellt?
Die Datenpunkte wurden offensichtlich richtig angelegt.
Aber dder PM scheint nicht mehr erreichtbar. Es wird keine uptime angezeigt und nichts unter online. Die IP Adresse (Hostname) ist seltsam. Klingt nach VPN, Privatem Netz oder sowas.
Kannst Du vom ioBroker aus schalten?
Was sagt das Log, wenn Du den Adapter auf debug stellst und dann versuchst zu schalten? -
Servus
meine Shelly's sind in einem separaten vlan -> 10.0.0.x/24
der iobroker befindet sich aber im selben Netz
-
@simpixo was sagt http://10.0.0.31/status ? was zeigt er in der WebUI an ?
-
@harrym sagte in Shelly und die Energieanzeige:
Also hier tauchen die Werte auf, warum aber nicht in den Datenpunkten?
{"wifi_sta":{"connected":true,"ssid":"home.iot","ip":"10.0.0.31","rssi":-78},"cloud":{"enabled":true,"connected":true},"mqtt":{"connected":false},"time":"21:26","unixtime":1593293160,"serial":127,"has_update":false,"mac":"xxxxxxxxxxxx","relays" :[{"ison":true, "has_timer":false, "timer_started":0, "timer_duration":0, "timer_remaining":0, "overpower":false}],"meters":[{"power":1853.63,"is_valid":true,"timestamp":1593293160,"counters":[1845.457, 1849.325, 1841.731],"total":180600}],"inputs":[{"input":0,"event":"","event_cnt":0}],"ext_sensors":{},"ext_temperature":{},"ext_humidity":{},"temperature":63.19,"overtemperature":false,"tmp":{"tC":63.19,"tF":145.74, "is_valid":true},"update":{"status":"idle","has_update":false,"new_version":"20200601-123334/v1.7.0@d7961837","old_version":"20200601-123334/v1.7.0@d7961837"},"ram_total":49920,"ram_free":37916,"ram_lwm":32448,"fs_size":233681,"fs_free":152357,"uptime":6475} -
@simpixo bei dir taucht mehr nicht in den Datenpunkten auf ....
-
@simpixo blöde idee ... aber versuch mal unter den objekten nen browser refresh ....
-
Alles schon probiert
das Debuglog sieht wie folgt aus
2020-06-27 21:41:20.727 - debug: shelly.0 (15228) CoAP data ignored: {"3332":"SHSW-25#BCDDC277671C#1","3412":38400,"3420":15105,"Uri-Path":"cit/s"} / {"G":[[0,112,0],[0,122,0],[0,111,0.000000],[0,121,0.000000],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0.000],[0,212,0.000],[0,213,0.000],[0,214,0],[0,221,0.000],[0,222,0.000],[0,223,0.000],[0,224,0]]} 2020-06-27 21:41:21.017 - debug: shelly.0 (15228) CoAP status package received: {"3332":"SHSW-PM#BA1CB0#1","3412":38400,"3420":58369,"Uri-Path":"cit/s"} / {"G":[[0,111,1839.87],[0,112,1],[0,113,63.13],[0,114,145.63],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]} 2020-06-27 21:41:21.018 - debug: shelly.0 (15228) Status update received for SHSW-PM#BA1CB0#1: {"G":[[0,111,1839.87],[0,112,1],[0,113,63.13],[0,114,145.63],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]} 2020-06-27 21:41:21.018 - debug: shelly.0 (15228) CoAP device description request for SHSW-PM#BA1CB0#1 to 10.0.0.31(0) 2020-06-27 21:41:21.018 - debug: shelly.0 (15228) CoAP Message for SHSW-PM#BA1CB0#1 : {"G":[[0,111,1839.87],[0,112,1],[0,113,63.13],[0,114,145.63],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]} 2020-06-27 21:41:21.018 - debug: shelly.0 (15228) Create State : SHSW-PM#BA1CB0#1.Relay0.Switch, Payload: {"G":[[0,111,1839.87],[0,112,1],[0,113,63.13],[0,114,145.63],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]} for SHSW-PM#BA1CB0#1 2020-06-27 21:41:21.018 - debug: shelly.0 (15228) Create State : SHSW-PM#BA1CB0#1.Relay0.Switch, Payload: [object Object] for SHSW-PM#BA1CB0#1 2020-06-27 21:41:21.034 - debug: shelly.0 (15228) CoAP response: {"3332":"SHSW-PM#BA1CB0#1"} 2020-06-27 21:41:21.034 - debug: shelly.0 (15228) Device description received: {"3332":"SHSW-PM#BA1CB0#1"} / {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Sensors"}],"sen":[{"I":111,"T":"P","D":"Power","R":"0/3500","L":0},{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":113,"T":"T","D":"Temperature C","R":"-40/300","L":0},{"I":114,"T":"T","D":"Temperature F","R":"-40/300","L":0},{"I":115,"T":"S","D":"Overtemp","R":"0/1","L":0},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0}]} 2020-06-27 21:41:21.922 - info: host.iobroker stopInstance system.adapter.shelly.0 (force=false, process=true) 2020-06-27 21:41:21.924 - info: host.iobroker stopInstance system.adapter.shelly.0 send kill signal 2020-06-27 21:41:21.926 - info: shelly.0 (15228) Got terminate signal TERMINATE_YOURSELF 2020-06-27 21:41:21.926 - info: shelly.0 (15228) Closing Adapter 2020-06-27 21:41:21.927 - info: shelly.0 (15228) terminating 2020-06-27 21:41:21.927 - debug: shelly.0 (15228) Plugin sentry destroyed 2020-06-27 21:41:21.927 - info: shelly.0 (15228) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2020-06-27 21:41:22.451 - info: host.iobroker instance system.adapter.shelly.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2020-06-27 21:41:24.960 - info: host.iobroker instance system.adapter.shelly.0 started with pid 6740 2020-06-27 21:41:25.250 - debug: shelly.0 (6740) Redis Objects: Use Redis connection: 127.0.0.1:9001 2020-06-27 21:41:25.262 - debug: shelly.0 (6740) Objects client ready ... initialize now 2020-06-27 21:41:25.263 - debug: shelly.0 (6740) Objects create System PubSub Client 2020-06-27 21:41:25.263 - debug: shelly.0 (6740) Objects create User PubSub Client 2020-06-27 21:41:25.266 - debug: shelly.0 (6740) Objects client initialize lua scripts 2020-06-27 21:41:25.277 - debug: shelly.0 (6740) Objects connected to redis: 127.0.0.1:9001 2020-06-27 21:41:25.278 - debug: shelly.0 (6740) objectDB connected 2020-06-27 21:41:25.279 - debug: shelly.0 (6740) Redis States: Use Redis connection: 127.0.0.1:9000 2020-06-27 21:41:25.285 - debug: shelly.0 (6740) States create User PubSub Client 2020-06-27 21:41:25.286 - debug: shelly.0 (6740) States create System PubSub Client 2020-06-27 21:41:25.295 - debug: shelly.0 (6740) States connected to redis: 127.0.0.1:9000 2020-06-27 21:41:25.296 - debug: shelly.0 (6740) statesDB connected 2020-06-27 21:41:25.567 - debug: shelly.0 (6740) Plugin sentry Initialize Plugin (enabled=true) 2020-06-27 21:41:25.648 - info: shelly.0 (6740) starting. Version 3.3.4 in /opt/iobroker/node_modules/iobroker.shelly, node: v12.18.1, js-controller: 3.1.6 2020-06-27 21:41:25.656 - info: shelly.0 (6740) Starting Adapter shelly.0 in version 3.3.4 2020-06-27 21:41:25.656 - info: shelly.0 (6740) Polltime of the shelly devices: 10 sec. 2020-06-27 21:41:25.663 - info: shelly.0 (6740) Starting Shelly adapter in CoAP modus. 2020-06-27 21:41:25.678 - info: shelly.0 (6740) Listening for Shelly packets in the network 2020-06-27 21:41:30.393 - debug: shelly.0 (6740) CoAP status package received: {"3332":"SHSW-25#68C63AF908FF#1","3412":38400,"3420":26113,"Uri-Path":"cit/s"} / {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} 2020-06-27 21:41:30.394 - debug: shelly.0 (6740) Status update received for SHSW-25#68C63AF908FF#1: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} 2020-06-27 21:41:30.394 - debug: shelly.0 (6740) CoAP device description request for SHSW-25#68C63AF908FF#1 to 10.0.0.30(0) 2020-06-27 21:41:30.421 - debug: shelly.0 (6740) CoAP response: {"3332":"SHSW-25#68C63AF908FF#1"} 2020-06-27 21:41:30.422 - debug: shelly.0 (6740) Device description received: {"3332":"SHSW-25#68C63AF908FF#1"} / {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Relay1"},{"I":2,"D":"Device"}],"sen":[{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":122,"T":"S","D":"State","R":"0/1","L":1},{"I":111,"T":"P","D":"Power","R":"0/2300","L":0},{"I":121,"T":"P","D":"Power","R":"0/2300","L":1},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":128,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":1},{"I":115,"T":"T","D":"Temperature C","R":"-40/300","L":2},{"I":116,"T":"T","D":"Temperature F","R":"-40/300","L":2},{"I":117,"T":"S","D":"Overtemp","R":"0/1","L":2},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0},{"I":221,"T":"S","D":"Energy counter 0 [W-min]","L":1},{"I":222,"T":"S","D":"Energy counter 1 [W-min]","L":1},{"I":223,"T":"S","D":"Energy counter 2 [W-min]","L":1},{"I":224,"T":"S","D":"Energy counter total [W-min]","L":1}]} 2020-06-27 21:41:30.422 - info: shelly.0 (6740) Shelly device 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1) with CoAP connected! 2020-06-27 21:41:30.422 - debug: shelly.0 (6740) 1. Shelly device Info: SHSW-25#68C63AF908FF#1 : {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Relay1"},{"I":2,"D":"Device"}],"sen":[{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":122,"T":"S","D":"State","R":"0/1","L":1},{"I":111,"T":"P","D":"Power","R":"0/2300","L":0},{"I":121,"T":"P","D":"Power","R":"0/2300","L":1},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":128,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":1},{"I":115,"T":"T","D":"Temperature C","R":"-40/300","L":2},{"I":116,"T":"T","D":"Temperature F","R":"-40/300","L":2},{"I":117,"T":"S","D":"Overtemp","R":"0/1","L":2},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0},{"I":221,"T":"S","D":"Energy counter 0 [W-min]","L":1},{"I":222,"T":"S","D":"Energy counter 1 [W-min]","L":1},{"I":223,"T":"S","D":"Energy counter 2 [W-min]","L":1},{"I":224,"T":"S","D":"Energy counter total [W-min]","L":1}]} 2020-06-27 21:41:30.423 - debug: shelly.0 (6740) 2. Shelly device Info: SHSW-25#68C63AF908FF#1 : {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} 2020-06-27 21:41:30.428 - debug: shelly.0 (6740) CoAP Message for SHSW-25#68C63AF908FF#1 : {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} 2020-06-27 21:41:30.429 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Switch, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:30.429 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Switch, Payload: [object Object] for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:30.429 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Relay0.Switch, Value: true for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1) 2020-06-27 21:41:30.429 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Power, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:30.430 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Power, Payload: [object Object] for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:30.430 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Relay0.Power, Value: 8.08 for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1) 2020-06-27 21:41:30.430 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Switch, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:30.430 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Switch, Payload: [object Object] for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:30.430 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Relay1.Switch, Value: true for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1) 2020-06-27 21:41:30.430 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Power, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:30.430 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Power, Payload: [object Object] for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:30.430 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Relay1.Power, Value: 175.62 for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1) 2020-06-27 21:41:30.431 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.state, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:30.431 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.state, Payload: [object Object] for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:30.431 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Shutter.state, Value: "open" for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1) 2020-06-27 21:41:30.431 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.Position, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.075501],[0,121,175.619339],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:30.431 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.Position, Payload: [object Object] for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:30.431 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Shutter.Position, Value: null for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1) 2020-06-27 21:41:35.734 - debug: shelly.0 (6740) CoAP status package received: {"3332":"SHSW-25#BCDDC277671C#1","3412":38400,"3420":15105,"Uri-Path":"cit/s"} / {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} 2020-06-27 21:41:35.735 - debug: shelly.0 (6740) Status update received for SHSW-25#BCDDC277671C#1: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} 2020-06-27 21:41:35.735 - debug: shelly.0 (6740) CoAP device description request for SHSW-25#BCDDC277671C#1 to 10.0.0.29(0) 2020-06-27 21:41:35.736 - debug: shelly.0 (6740) Connection update received for SHSW-25#BCDDC277671C#1: true 2020-06-27 21:41:35.768 - debug: shelly.0 (6740) CoAP response: {"3332":"SHSW-25#BCDDC277671C#1"} 2020-06-27 21:41:35.768 - debug: shelly.0 (6740) Device description received: {"3332":"SHSW-25#BCDDC277671C#1"} / {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Relay1"},{"I":2,"D":"Device"}],"sen":[{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":122,"T":"S","D":"State","R":"0/1","L":1},{"I":111,"T":"P","D":"Power","R":"0/2300","L":0},{"I":121,"T":"P","D":"Power","R":"0/2300","L":1},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":128,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":1},{"I":115,"T":"T","D":"Temperature C","R":"-40/300","L":2},{"I":116,"T":"T","D":"Temperature F","R":"-40/300","L":2},{"I":117,"T":"S","D":"Overtemp","R":"0/1","L":2},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0},{"I":221,"T":"S","D":"Energy counter 0 [W-min]","L":1},{"I":222,"T":"S","D":"Energy counter 1 [W-min]","L":1},{"I":223,"T":"S","D":"Energy counter 2 [W-min]","L":1},{"I":224,"T":"S","D":"Energy counter total [W-min]","L":1}]} 2020-06-27 21:41:35.769 - info: shelly.0 (6740) Shelly device 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1) with CoAP connected! 2020-06-27 21:41:35.769 - debug: shelly.0 (6740) 1. Shelly device Info: SHSW-25#BCDDC277671C#1 : {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Relay1"},{"I":2,"D":"Device"}],"sen":[{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":122,"T":"S","D":"State","R":"0/1","L":1},{"I":111,"T":"P","D":"Power","R":"0/2300","L":0},{"I":121,"T":"P","D":"Power","R":"0/2300","L":1},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":128,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":1},{"I":115,"T":"T","D":"Temperature C","R":"-40/300","L":2},{"I":116,"T":"T","D":"Temperature F","R":"-40/300","L":2},{"I":117,"T":"S","D":"Overtemp","R":"0/1","L":2},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0},{"I":221,"T":"S","D":"Energy counter 0 [W-min]","L":1},{"I":222,"T":"S","D":"Energy counter 1 [W-min]","L":1},{"I":223,"T":"S","D":"Energy counter 2 [W-min]","L":1},{"I":224,"T":"S","D":"Energy counter total [W-min]","L":1}]} 2020-06-27 21:41:35.769 - debug: shelly.0 (6740) 2. Shelly device Info: SHSW-25#BCDDC277671C#1 : {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} 2020-06-27 21:41:35.772 - debug: shelly.0 (6740) CoAP Message for SHSW-25#BCDDC277671C#1 : {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} 2020-06-27 21:41:35.773 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay0.Switch, Payload: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} for SHSW-25#BCDDC277671C#1 2020-06-27 21:41:35.773 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay0.Switch, Payload: [object Object] for SHSW-25#BCDDC277671C#1 2020-06-27 21:41:35.773 - debug: shelly.0 (6740) State change : SHSW-25#BCDDC277671C#1.Relay0.Switch, Value: false for 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1) 2020-06-27 21:41:35.773 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay0.Power, Payload: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} for SHSW-25#BCDDC277671C#1 2020-06-27 21:41:35.773 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay0.Power, Payload: [object Object] for SHSW-25#BCDDC277671C#1 2020-06-27 21:41:35.773 - debug: shelly.0 (6740) State change : SHSW-25#BCDDC277671C#1.Relay0.Power, Value: 0 for 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1) 2020-06-27 21:41:35.773 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay1.Switch, Payload: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} for SHSW-25#BCDDC277671C#1 2020-06-27 21:41:35.774 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay1.Switch, Payload: [object Object] for SHSW-25#BCDDC277671C#1 2020-06-27 21:41:35.774 - debug: shelly.0 (6740) State change : SHSW-25#BCDDC277671C#1.Relay1.Switch, Value: false for 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1) 2020-06-27 21:41:35.774 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay1.Power, Payload: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} for SHSW-25#BCDDC277671C#1 2020-06-27 21:41:35.774 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Relay1.Power, Payload: [object Object] for SHSW-25#BCDDC277671C#1 2020-06-27 21:41:35.774 - debug: shelly.0 (6740) State change : SHSW-25#BCDDC277671C#1.Relay1.Power, Value: 0 for 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1) 2020-06-27 21:41:35.774 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Shutter.state, Payload: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} for SHSW-25#BCDDC277671C#1 2020-06-27 21:41:35.774 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Shutter.state, Payload: [object Object] for SHSW-25#BCDDC277671C#1 2020-06-27 21:41:35.774 - debug: shelly.0 (6740) State change : SHSW-25#BCDDC277671C#1.Shutter.state, Value: "stop" for 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1) 2020-06-27 21:41:35.774 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Shutter.Position, Payload: {"G":[[0,112,0],[0,122,0],[0,111,0],[0,121,0],[0,118,0],[0,128,0],[0,115,59.99],[0,116,139.99],[0,117,0],[0,211,0],[0,212,0],[0,213,0],[0,214,0],[0,221,0],[0,222,0],[0,223,0],[0,224,0]]} for SHSW-25#BCDDC277671C#1 2020-06-27 21:41:35.775 - debug: shelly.0 (6740) Create State : SHSW-25#BCDDC277671C#1.Shutter.Position, Payload: [object Object] for SHSW-25#BCDDC277671C#1 2020-06-27 21:41:35.775 - debug: shelly.0 (6740) State change : SHSW-25#BCDDC277671C#1.Shutter.Position, Value: null for 10.0.0.29 (shellyswitch25 / shellyswitch25-BCDDC277671C / SHSW-25#BCDDC277671C#1) 2020-06-27 21:41:36.019 - debug: shelly.0 (6740) CoAP status package received: {"3332":"SHSW-PM#BA1CB0#1","3412":38400,"3420":58625,"Uri-Path":"cit/s"} / {"G":[[0,111,1834.04],[0,112,1],[0,113,63.07],[0,114,145.52],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]} 2020-06-27 21:41:36.019 - debug: shelly.0 (6740) Status update received for SHSW-PM#BA1CB0#1: {"G":[[0,111,1834.04],[0,112,1],[0,113,63.07],[0,114,145.52],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]} 2020-06-27 21:41:36.019 - debug: shelly.0 (6740) CoAP device description request for SHSW-PM#BA1CB0#1 to 10.0.0.31(0) 2020-06-27 21:41:36.020 - debug: shelly.0 (6740) Connection update received for SHSW-PM#BA1CB0#1: true 2020-06-27 21:41:36.020 - debug: shelly.0 (6740) Connection update received for SHSW-PM#BA1CB0#1: true 2020-06-27 21:41:36.112 - debug: shelly.0 (6740) CoAP response: {"3332":"SHSW-PM#BA1CB0#1"} 2020-06-27 21:41:36.112 - debug: shelly.0 (6740) Device description received: {"3332":"SHSW-PM#BA1CB0#1"} / {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Sensors"}],"sen":[{"I":111,"T":"P","D":"Power","R":"0/3500","L":0},{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":113,"T":"T","D":"Temperature C","R":"-40/300","L":0},{"I":114,"T":"T","D":"Temperature F","R":"-40/300","L":0},{"I":115,"T":"S","D":"Overtemp","R":"0/1","L":0},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0}]} 2020-06-27 21:41:36.112 - info: shelly.0 (6740) Shelly device 10.0.0.31 (shelly1pm / shelly1pm-BA1CB0 / SHSW-PM#BA1CB0#1) with CoAP connected! 2020-06-27 21:41:36.112 - debug: shelly.0 (6740) 1. Shelly device Info: SHSW-PM#BA1CB0#1 : {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Sensors"}],"sen":[{"I":111,"T":"P","D":"Power","R":"0/3500","L":0},{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":113,"T":"T","D":"Temperature C","R":"-40/300","L":0},{"I":114,"T":"T","D":"Temperature F","R":"-40/300","L":0},{"I":115,"T":"S","D":"Overtemp","R":"0/1","L":0},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0}]} 2020-06-27 21:41:36.112 - debug: shelly.0 (6740) 2. Shelly device Info: SHSW-PM#BA1CB0#1 : {"G":[[0,111,1834.04],[0,112,1],[0,113,63.07],[0,114,145.52],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]} 2020-06-27 21:41:36.116 - debug: shelly.0 (6740) CoAP Message for SHSW-PM#BA1CB0#1 : {"G":[[0,111,1834.04],[0,112,1],[0,113,63.07],[0,114,145.52],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]} 2020-06-27 21:41:36.116 - debug: shelly.0 (6740) Create State : SHSW-PM#BA1CB0#1.Relay0.Switch, Payload: {"G":[[0,111,1834.04],[0,112,1],[0,113,63.07],[0,114,145.52],[0,115,0],[0,118,0],[0,211,1841.8],[0,212,1842.158],[0,213,1839.094],[0,214,208233]]} for SHSW-PM#BA1CB0#1 2020-06-27 21:41:36.116 - debug: shelly.0 (6740) Create State : SHSW-PM#BA1CB0#1.Relay0.Switch, Payload: [object Object] for SHSW-PM#BA1CB0#1 2020-06-27 21:41:36.116 - debug: shelly.0 (6740) State change : SHSW-PM#BA1CB0#1.Relay0.Switch, Value: true for 10.0.0.31 (shelly1pm / shelly1pm-BA1CB0 / SHSW-PM#BA1CB0#1) 2020-06-27 21:41:45.403 - debug: shelly.0 (6740) CoAP status package received: {"3332":"SHSW-25#68C63AF908FF#1","3412":38400,"3420":26369,"Uri-Path":"cit/s"} / {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} 2020-06-27 21:41:45.403 - debug: shelly.0 (6740) Status update received for SHSW-25#68C63AF908FF#1: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} 2020-06-27 21:41:45.403 - debug: shelly.0 (6740) CoAP device description request for SHSW-25#68C63AF908FF#1 to 10.0.0.30(0) 2020-06-27 21:41:45.404 - debug: shelly.0 (6740) CoAP Message for SHSW-25#68C63AF908FF#1 : {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} 2020-06-27 21:41:45.404 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Switch, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:45.404 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Switch, Payload: [object Object] for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Power, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay0.Power, Payload: [object Object] for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:45.405 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Relay0.Power, Value: 8.23 for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1) 2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Switch, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Switch, Payload: [object Object] for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Power, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Relay1.Power, Payload: [object Object] for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:45.405 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Relay1.Power, Value: 176.19 for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1) 2020-06-27 21:41:45.405 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.state, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:45.406 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.state, Payload: [object Object] for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:45.406 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.Position, Payload: {"G":[[0,112,1],[0,122,1],[0,111,8.233644],[0,121,176.186615],[0,118,0],[0,128,0],[0,115,76.18],[0,116,169.13],[0,117,0],[0,211,8.234],[0,212,8.241],[0,213,8.218],[0,214,646],[0,221,177.26],[0,222,177.543],[0,223,177.669],[0,224,14010]]} for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:45.406 - debug: shelly.0 (6740) Create State : SHSW-25#68C63AF908FF#1.Shutter.Position, Payload: [object Object] for SHSW-25#68C63AF908FF#1 2020-06-27 21:41:45.406 - debug: shelly.0 (6740) State change : SHSW-25#68C63AF908FF#1.Shutter.Position, Value: null for 10.0.0.30 (shellyswitch25 / shellyswitch25-68C63AF908FF / SHSW-25#68C63AF908FF#1) 2020-06-27 21:41:45.466 - debug: shelly.0 (6740) CoAP response: {"3332":"SHSW-25#68C63AF908FF#1"} 2020-06-27 21:41:45.467 - debug: shelly.0 (6740) Device description received: {"3332":"SHSW-25#68C63AF908FF#1"} / {"blk":[{"I":0,"D":"Relay0"},{"I":1,"D":"Relay1"},{"I":2,"D":"Device"}],"sen":[{"I":112,"T":"S","D":"State","R":"0/1","L":0},{"I":122,"T":"S","D":"State","R":"0/1","L":1},{"I":111,"T":"P","D":"Power","R":"0/2300","L":0},{"I":121,"T":"P","D":"Power","R":"0/2300","L":1},{"I":118,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":0},{"I":128,"T":"S","D":"Input","R":"0(off)/1(on)/2(longpush)","L":1},{"I":115,"T":"T","D":"Temperature C","R":"-40/300","L":2},{"I":116,"T":"T","D":"Temperature F","R":"-40/300","L":2},{"I":117,"T":"S","D":"Overtemp","R":"0/1","L":2},{"I":211,"T":"S","D":"Energy counter 0 [W-min]","L":0},{"I":212,"T":"S","D":"Energy counter 1 [W-min]","L":0},{"I":213,"T":"S","D":"Energy counter 2 [W-min]","L":0},{"I":214,"T":"S","D":"Energy counter total [W-min]","L":0},{"I":221,"T":"S","D":"Energy counter 0 [W-min]","L":1},{"I":222,"T":"S","D":"Energy counter 1 [W-min]","L":1},{"I":223,"T":"S","D":"Energy counter 2 [W-min]","L":1},{"I":224,"T":"S","D":"Energy counter total [W-min]","L":1}]}
