Probleme mit deconz Adabter

Thomas Braun

@Michael-Schmitt
Nur deine Änderungen/Anpassungen. Die weiteren Einstellungen zieht sich systemd dann aus den anderen Dateien.
Diese drop-in-files legen sich nur wie eine Maske über die Voreinstellungen aus dem Paket wie sie vom Packager vorgesehen worden sind.

Michael Schmitt

dann werd ich das das nächste mal testen, muß eh paar updates einspielen

Thomas Braun

@Michael-Schmitt sagte:

war deswegen wohl auch nach einem update von Deconz meine Einstellungen weg ?

Wenn du die direkt in /usr/lib/systemd/system/deconz.service getätigt hast, dann ja. Denn diese Datei ist im deconz-Paket enthalten und wird daher bei einem Update mit den Voreinstellungen aus dem Paket überschrieben.
Die 'drop-in-files' mit deinen individuellen Einstellungen bleiben aber stehen.

docsnyder7

sollte man vorher den Dienst stoppen?
@thomas-braun also nur "--ws-port=441" in die Zeile

docsnyder7

@Michael-Schmitt sagte:

hi,
läuft bei dir deconz oder deconz-gui ?
systemctl status deconz

systemctl status deconz
● deconz.service - deCONZ: ZigBee gateway -- REST API
     Loaded: loaded (/lib/systemd/system/deconz.service; enabled; preset: enabled)
    Drop-In: /etc/systemd/system/deconz.service.d
             └─override.conf
     Active: activating (auto-restart) (Result: exit-code) since Thu 2026-07-23 13:35:42 CEST; 29s ago
    Process: 24355 ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80 (code=exited, status=203/EXEC)
   Main PID: 24355 (code=exited, status=203/EXEC)
        CPU: 2ms

Jul 23 13:35:42 evccpi (deCONZ)[24355]: deconz.service: Failed at step EXEC spawning /usr/bin/deCONZ: No such file or directory
Jul 23 13:35:42 evccpi systemd[1]: deconz.service: Main process exited, code=exited, status=203/EXEC
Jul 23 13:35:42 evccpi systemd[1]: deconz.service: Failed with result 'exit-code'.
Jul 23 13:36:12 evccpi systemd[1]: /etc/systemd/system/deconz.service.d/override.conf:1: Assignment outside of section. Ignoring.

Thomas Braun

@docsnyder7 sagte:

sollte man vorher den Dienst stoppen?

Service neustarten reicht, dann werden die config-Dateien mit deinen Änderungen frisch eingelesen.

sudo systemctl restart deconz

wird wohl ausreichen.

@thomas-braun also nur "--ws-port=441" in die Zeile

Nein, die vollständige, korrekte Syntax muss da eingetragen werden.
Vermutlich also eher

[Service]
ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80 --https-port=0 --ws-port=441

Edit: Die Section muss auch gesetzt werden. Sonst kommt:
Assignment outside of section. Ignoring.

docsnyder7

Ok… Dankeschön…
Kann man die Änderung dann in der Usr/lib/systemd/system/deconz.service kontrollieren?

Thomas Braun

@docsnyder7 sagte:

/usr/bin/deCONZ: No such file or directory

Schaut mal, wie die Datei richtig heißt. Groß/Kleinschreibung beachten!

Thomas Braun

@docsnyder7 sagte:

Kann man die Änderung dann in der Usr/lib/systemd/system/deconz.service kontrollieren?

Da siehst du keine individuellen Einträge, da stehen immer die defaults drin.

docsnyder7

@Thomas-Braun

### Editing /etc/systemd/system/deconz.service.d/override.conf
### Anything between here and the comment below will become the new contents of the file

[Service]
ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80 --https-port=0 --ws-port=441

### Lines below this comment will be discarded

### /lib/systemd/system/deconz.service
# [Unit]
# Description=deCONZ: ZigBee gateway -- REST API
# Wants=deconz-init.service
# StartLimitIntervalSec=0
#
# [Service]
# User=1000
# ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80
# Restart=on-failure
# RestartSec=30
# AmbientCapabilities=CAP_NET_BIND_SERVICE CAP_KILL CAP_SYS_BOOT CAP_SYS_TIME
#
# [Install]
# WantedBy=multi-user.target

sudo systemctl restart deconz
Failed to restart deconz.service: Unit deconz.service has a bad unit file setting.
See system logs and 'systemctl status deconz.service' for details.

systemctl status deconz
Warning: The unit file, source configuration file or drop-ins of deconz.service changed on disk. Run 'systemctl daemon-reload' to reload units.
× deconz.service - deCONZ: ZigBee gateway -- REST API
     Loaded: bad-setting (Reason: Unit deconz.service has a bad unit file setting.)
    Drop-In: /etc/systemd/system/deconz.service.d
             └─override.conf
     Active: failed (Result: exit-code) since Thu 2026-07-23 13:51:20 CEST; 2min 50s ago
   Duration: 4ms
   Main PID: 25186 (code=exited, status=203/EXEC)
        CPU: 3ms

Jul 23 13:51:02 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 13:51:20 evccpi systemd[1]: deconz.service: Failed to schedule restart job: Unit deconz.service has a bad unit file setting.
Jul 23 13:51:20 evccpi systemd[1]: deconz.service: Failed with result 'exit-code'.
Jul 23 13:52:49 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 13:53:44 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.

Thomas Braun

@docsnyder7 sagte:

Run 'systemctl daemon-reload' to reload units.

Michael Schmitt

ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80 --https-port=0 --ws-port=441

Vielleicht das --https-port=0 rausnehmen. Das hab ich bei mir mal eingetragen da es mit dem Https port 443 Probleme gab

docsnyder7

Sorry @thomas-braun und @michael-schmitt
ich bin wohl zu doof für diese Welt...

nach dem daemon-reload
sudo systemctl restart deconz
Failed to restart deconz.service: Unit deconz.service has a bad unit file setting
see system logs an ´systemctl status deconz.service´

sudo systemctl status deconz.service
Warning: The unit file, source configuration file or drop-ins of deconz.service changed on disk. Run 'systemctl daemon-reload' to reload units.
× deconz.service - deCONZ: ZigBee gateway -- REST API
     Loaded: bad-setting (Reason: Unit deconz.service has a bad unit file setting.)
    Drop-In: /etc/systemd/system/deconz.service.d
             └─override.conf
     Active: failed (Result: exit-code) since Thu 2026-07-23 13:51:20 CEST; 42min ago
   Duration: 4ms
   Main PID: 25186 (code=exited, status=203/EXEC)
        CPU: 3ms

Jul 23 13:51:02 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 13:51:20 evccpi systemd[1]: deconz.service: Failed to schedule restart job: Unit deconz.service has a bad unit file setting.
Jul 23 13:51:20 evccpi systemd[1]: deconz.service: Failed with result 'exit-code'.
Jul 23 13:52:49 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 13:53:44 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 13:55:00 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 13:55:14 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 14:11:56 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 14:17:22 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 14:17:35 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.

dazukommt nach dem edit

sudo systemctl edit deconz.service
Editing "/etc/systemd/system/deconz.service.d/override.conf" canceled: temporary file is empty.

Thomas Braun

@docsnyder7 sagte:

Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.

Musste ich jetzt auch extern nachschauen:

How to Fix It:
Clear the old value:
Add an empty ExecStart= line before your new ExecStart= line in your override/drop-in file to wipe previous definitions.

Inspect the unit file: Run systemctl cat <service-name> to see the combined configuration and find where the extra line is coming from.

Check drop-in overrides: Look inside /etc/systemd/system/<service-name>.service.d/ for conflicting override files.

Reload systemd: Run sudo systemctl daemon-reload and then restart your service with sudo systemctl restart <service-name>.

docsnyder7

@Thomas-Braun

sudo systemctl cat deconz.service
# Warning: deconz.service changed on disk, the version systemd has loaded is outdated.
# This output shows the current version of the unit's original fragment and drop-in files.
# If fragments or drop-ins were added or removed, they are not properly reflected in this output.
# Run 'systemctl daemon-reload' to reload units.
# /lib/systemd/system/deconz.service
[Unit]
Description=deCONZ: ZigBee gateway -- REST API
Wants=deconz-init.service
StartLimitIntervalSec=0

[Service]
User=1000
ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80
Restart=on-failure
RestartSec=30
AmbientCapabilities=CAP_NET_BIND_SERVICE CAP_KILL CAP_SYS_BOOT CAP_SYS_TIME

[Install]
WantedBy=multi-user.target

# /etc/systemd/system/deconz.service.d/override.conf
[Service]
ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80 --ws-port=441

docsnyder7

Mal ne Gegenfrage... kann ich mit dem conbee2 auch auf den zigbee adapter gehen?

Thomas Braun

@docsnyder7 sagte:

Warning: deconz.service changed on disk, the version systemd has loaded is outdated.

Starte die Kiste mal komplett durch.

kann ich mit dem conbee2 auch auf den zigbee adapter gehen?

Ja.

docsnyder7

@Thomas-Braun
reboot läuft...

keine Veränderung...

sudo systemctl status deconz.service
Warning: The unit file, source configuration file or drop-ins of deconz.service changed on disk. Run 'systemctl daemon-reload' to reload units.
○ deconz.service - deCONZ: ZigBee gateway -- REST API
     Loaded: bad-setting (Reason: Unit deconz.service has a bad unit file setting.)
    Drop-In: /etc/systemd/system/deconz.service.d
             └─override.conf
     Active: inactive (dead)

Jul 23 15:13:32 evccpi systemd[1]: /etc/systemd/system/deconz.service.d/override.conf:1: Assignment outside of section. Ignoring.
Jul 23 15:13:32 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 15:13:37 evccpi systemd[1]: /etc/systemd/system/deconz.service.d/override.conf:1: Assignment outside of section. Ignoring.
Jul 23 15:13:53 evccpi systemd[1]: /etc/systemd/system/deconz.service.d/override.conf:1: Assignment outside of section. Ignoring.
Jul 23 15:13:53 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 15:13:56 evccpi systemd[1]: /etc/systemd/system/deconz.service.d/override.conf:1: Assignment outside of section. Ignoring.

Thomas Braun

@docsnyder7 sagte:

/etc/systemd/system/deconz.service.d/override.conf

Was steht denn jetzt da drin?

docsnyder7

@thomas-braun sorry.. muss ich später machen, der PI startet grad nicht mehr und ich bin nicht zu Hause

Community Forum

NEWS

Probleme mit deconz Adabter

Warning: deconz.service changed on disk, the version systemd has loaded is outdated.

Warning: deconz.service changed on disk, the version systemd has loaded is outdated.

Support us

418

33.0k

83.5k

1.3m