Der neue Monatsrückblick für Mai und Juni 2026 ist online!

[docsnyder7]

Ok… Dankeschön…
Kann man die Änderung dann in der Usr/lib/systemd/system/deconz.service kontrollieren?

[Thomas Braun]

@docsnyder7 sagte:

/usr/bin/deCONZ: No such file or directory

Schaut mal, wie die Datei richtig heißt. Groß/Kleinschreibung beachten!

[Thomas Braun]

@docsnyder7 sagte:

Kann man die Änderung dann in der Usr/lib/systemd/system/deconz.service kontrollieren?

Da siehst du keine individuellen Einträge, da stehen immer die defaults drin.

[docsnyder7]

@Thomas-Braun

### Editing /etc/systemd/system/deconz.service.d/override.conf
### Anything between here and the comment below will become the new contents of the file

[Service]
ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80 --https-port=0 --ws-port=441

### Lines below this comment will be discarded

### /lib/systemd/system/deconz.service
# [Unit]
# Description=deCONZ: ZigBee gateway -- REST API
# Wants=deconz-init.service
# StartLimitIntervalSec=0
#
# [Service]
# User=1000
# ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80
# Restart=on-failure
# RestartSec=30
# AmbientCapabilities=CAP_NET_BIND_SERVICE CAP_KILL CAP_SYS_BOOT CAP_SYS_TIME
#
# [Install]
# WantedBy=multi-user.target

sudo systemctl restart deconz
Failed to restart deconz.service: Unit deconz.service has a bad unit file setting.
See system logs and 'systemctl status deconz.service' for details.

systemctl status deconz
Warning: The unit file, source configuration file or drop-ins of deconz.service changed on disk. Run 'systemctl daemon-reload' to reload units.
× deconz.service - deCONZ: ZigBee gateway -- REST API
     Loaded: bad-setting (Reason: Unit deconz.service has a bad unit file setting.)
    Drop-In: /etc/systemd/system/deconz.service.d
             └─override.conf
     Active: failed (Result: exit-code) since Thu 2026-07-23 13:51:20 CEST; 2min 50s ago
   Duration: 4ms
   Main PID: 25186 (code=exited, status=203/EXEC)
        CPU: 3ms

Jul 23 13:51:02 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 13:51:20 evccpi systemd[1]: deconz.service: Failed to schedule restart job: Unit deconz.service has a bad unit file setting.
Jul 23 13:51:20 evccpi systemd[1]: deconz.service: Failed with result 'exit-code'.
Jul 23 13:52:49 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 13:53:44 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.

[Thomas Braun]

@docsnyder7 sagte:

Run 'systemctl daemon-reload' to reload units.

[Michael Schmitt]

ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80 --https-port=0 --ws-port=441

Vielleicht das --https-port=0 rausnehmen. Das hab ich bei mir mal eingetragen da es mit dem Https port 443 Probleme gab

[docsnyder7]

Sorry @thomas-braun und @michael-schmitt
ich bin wohl zu doof für diese Welt...

nach dem daemon-reload
sudo systemctl restart deconz
Failed to restart deconz.service: Unit deconz.service has a bad unit file setting
see system logs an ´systemctl status deconz.service´

sudo systemctl status deconz.service
Warning: The unit file, source configuration file or drop-ins of deconz.service changed on disk. Run 'systemctl daemon-reload' to reload units.
× deconz.service - deCONZ: ZigBee gateway -- REST API
     Loaded: bad-setting (Reason: Unit deconz.service has a bad unit file setting.)
    Drop-In: /etc/systemd/system/deconz.service.d
             └─override.conf
     Active: failed (Result: exit-code) since Thu 2026-07-23 13:51:20 CEST; 42min ago
   Duration: 4ms
   Main PID: 25186 (code=exited, status=203/EXEC)
        CPU: 3ms

Jul 23 13:51:02 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 13:51:20 evccpi systemd[1]: deconz.service: Failed to schedule restart job: Unit deconz.service has a bad unit file setting.
Jul 23 13:51:20 evccpi systemd[1]: deconz.service: Failed with result 'exit-code'.
Jul 23 13:52:49 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 13:53:44 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 13:55:00 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 13:55:14 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 14:11:56 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 14:17:22 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 14:17:35 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.

dazukommt nach dem edit

sudo systemctl edit deconz.service
Editing "/etc/systemd/system/deconz.service.d/override.conf" canceled: temporary file is empty.

[Thomas Braun]

@docsnyder7 sagte:

Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.

Musste ich jetzt auch extern nachschauen:

How to Fix It:
Clear the old value:
Add an empty ExecStart= line before your new ExecStart= line in your override/drop-in file to wipe previous definitions.

Inspect the unit file: Run systemctl cat <service-name> to see the combined configuration and find where the extra line is coming from.

Check drop-in overrides: Look inside /etc/systemd/system/<service-name>.service.d/ for conflicting override files.

Reload systemd: Run sudo systemctl daemon-reload and then restart your service with sudo systemctl restart <service-name>.

[docsnyder7]

@Thomas-Braun

sudo systemctl cat deconz.service
# Warning: deconz.service changed on disk, the version systemd has loaded is outdated.
# This output shows the current version of the unit's original fragment and drop-in files.
# If fragments or drop-ins were added or removed, they are not properly reflected in this output.
# Run 'systemctl daemon-reload' to reload units.
# /lib/systemd/system/deconz.service
[Unit]
Description=deCONZ: ZigBee gateway -- REST API
Wants=deconz-init.service
StartLimitIntervalSec=0

[Service]
User=1000
ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80
Restart=on-failure
RestartSec=30
AmbientCapabilities=CAP_NET_BIND_SERVICE CAP_KILL CAP_SYS_BOOT CAP_SYS_TIME

[Install]
WantedBy=multi-user.target

# /etc/systemd/system/deconz.service.d/override.conf
[Service]
ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80 --ws-port=441

[docsnyder7]

Mal ne Gegenfrage... kann ich mit dem conbee2 auch auf den zigbee adapter gehen?

[Thomas Braun]

@docsnyder7 sagte:

Warning: deconz.service changed on disk, the version systemd has loaded is outdated.

Starte die Kiste mal komplett durch.

kann ich mit dem conbee2 auch auf den zigbee adapter gehen?

Ja.

[docsnyder7]

@Thomas-Braun
reboot läuft...

keine Veränderung...

sudo systemctl status deconz.service
Warning: The unit file, source configuration file or drop-ins of deconz.service changed on disk. Run 'systemctl daemon-reload' to reload units.
○ deconz.service - deCONZ: ZigBee gateway -- REST API
     Loaded: bad-setting (Reason: Unit deconz.service has a bad unit file setting.)
    Drop-In: /etc/systemd/system/deconz.service.d
             └─override.conf
     Active: inactive (dead)

Jul 23 15:13:32 evccpi systemd[1]: /etc/systemd/system/deconz.service.d/override.conf:1: Assignment outside of section. Ignoring.
Jul 23 15:13:32 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 15:13:37 evccpi systemd[1]: /etc/systemd/system/deconz.service.d/override.conf:1: Assignment outside of section. Ignoring.
Jul 23 15:13:53 evccpi systemd[1]: /etc/systemd/system/deconz.service.d/override.conf:1: Assignment outside of section. Ignoring.
Jul 23 15:13:53 evccpi systemd[1]: deconz.service: Service has more than one ExecStart= setting, which is only allowed for Type=oneshot services. Refusing.
Jul 23 15:13:56 evccpi systemd[1]: /etc/systemd/system/deconz.service.d/override.conf:1: Assignment outside of section. Ignoring.

[Thomas Braun]

@docsnyder7 sagte:

/etc/systemd/system/deconz.service.d/override.conf

Was steht denn jetzt da drin?

[docsnyder7]

@thomas-braun sorry.. muss ich später machen, der PI startet grad nicht mehr und ich bin nicht zu Hause

[Michael Schmitt]

gerade gefunden kann da was dran sein.

sudo systemctl edit deconz.service

[Service]
ExecStart=
ExecStart=/usr/bin/deCONZ -platform minimal --http-port=80 --ws-port=441

Wichtig: Die erste leere Zeile ExecStart= ist notwendig, um den alten Startbefehl des Systems zu löschen, bevor dein neuer Befehl greift).

Speichere die Datei im Editor ab (bei nano: Strg + O, Enter und danach Strg + X zum Beenden).

Danach sollte die override.conf in
/etc/systemd/system/deconz.service.d/override.conf
erstellt werden.

sudo systemctl daemon-reload

sudo systemctl restart deconz

Stimmt das so @thomas-braun ?

[Thomas Braun]

@Michael-Schmitt

Ja, das hatte ich ja oben auch schon so gefunden:

How to Fix It:
Clear the old value:
Add an empty ExecStart= line before your new ExecStart= line in your override/drop-in file to wipe previous definitions.