Zigbee Conbee

rccardany

Hallo zusammen.

ich betreibe den IOBroker unter Debai 11 auf einer NUC.
darauf habe ich den Zigbee Adapter installiert und finde auch den Conbee Stick

/dev/ttyACM0 [usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2141436-if00]

wenn ich den jedoch auswähle und den Adapter neu starte, wird der Adapter nicht grün und beim paren kommt folgende Meldung:

Error: Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'". undefined
Error: Starting zigbee-herdsman problem : "get network parameters Error:TIMEOUT". undefined

Ich habe exakt das gleiche an einem Pi4 probiert und kann tadellos mit dem conbee Stick und dem zigbee Adapter geräte verbinden.

Wo liegt der Unterschied?

kann jemand helfen?
Ziel Soll das System auf der NUC sein.

tritor

@rccardany

Liste unter Debian die USB by serial ID
Den Eintrag in de AdapterInstanz sollte in etwa so aussehen:

/dev/serial/by-id/usbITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_xxxxxxxxxxxxxxxxxxx-port0

Thomas Braun

@rccardany

Schau dir die Ausgabe von

iob diag

an. Da gibt es einen Part, der die by-id-Links behandelt.

rccardany

@thomas-braun said in Zigbee Conbee:

iob diag

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please alw ays prefer the links 'by-id':

/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE21414 36-if00

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyACM0

das kommt dabei raus

rccardany

@rccardany

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2141436-if00

Your zigbee.0 COM-Port is matching 'by-id'. Very good!

Hab den Eintrag wie gefordert geändert.... funktionieren tut es trotzdem nicht

Thomas Braun

@rccardany
Dann zeig den Rest.

rccardany

@thomas-braun

======== Start marking the full check here =========

Skript v.2024-04-21

*** BASE SYSTEM ***
   Static hostname: zbox
         Icon name: computer-desktop
           Chassis: desktop
  Operating System: Debian GNU/Linux 11 (bullseye)
            Kernel: Linux 5.10.0-21-amd64
      Architecture: x86-64

model name      : Intel(R) Celeron(R) CPU N3450 @ 1.10GHz
Docker          : false
Virtualization  : none
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 09:16:46 up  1:15,  1 user,  load average: 1.46, 1.04, 0.91
CPU threads: 4


*** Time and Time Zones ***
               Local time: Fri 2024-05-10 09:16:47 CEST
           Universal time: Fri 2024-05-10 07:16:47 UTC
                 RTC time: Fri 2024-05-10 07:16:47
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
root
JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64/jre/
HOME=/root
GROUPS=root dialout

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev

*** Display-Server-Setup ***
Display-Server: false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        3.8G        2.7G        0.0K        1.3G        3.8G
Swap:           976M          0B        976M
Total:          8.8G        3.8G        3.6G

Active iob-Instances:   34

         7807 M total memory
         3848 M used memory
          460 M active memory
         4391 M inactive memory
         2650 M free memory
           82 M buffer memory
         1225 M swap cache
          976 M total swap
            0 M used swap
          976 M free swap

*** top - Table Of Processes  ***
top - 09:16:47 up  1:15,  1 user,  load average: 1.46, 1.04, 0.91
Tasks: 163 total,   1 running, 162 sleeping,   0 stopped,   0 zombie
%Cpu(s):  7.7 us,  3.1 sy,  0.0 ni, 89.2 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7807.1 total,   2650.1 free,   3848.7 used,   1308.3 buff/cache
MiB Swap:    977.0 total,    977.0 free,      0.0 used.   3846.8 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     781M  780K  780M   1% /run
/dev/sda2      ext4      116G   15G   95G  14% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
/dev/sda1      vfat      511M   11M  501M   3% /boot/efi
tmpfs          tmpfs     781M     0  781M   0% /run/user/1002

Messages concerning ext4 filesystem in dmesg:
[Fri May 10 08:01:33 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[Fri May 10 08:01:35 2024] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro

Show mounted filesystems:
TARGET                        SOURCE     FSTYPE     OPTIONS
/                             /dev/sda2  ext4       rw,relatime,errors=remount-ro
|-/sys                        sysfs      sysfs      rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security      securityfs securityfs rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup            cgroup2    cgroup2    rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot
| |-/sys/fs/pstore            pstore     pstore     rw,nosuid,nodev,noexec,relatime
| |-/sys/firmware/efi/efivars efivarfs   efivarfs   rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/bpf               none       bpf        rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/debug         debugfs    debugfs    rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/tracing       tracefs    tracefs    rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/fuse/connections  fusectl    fusectl    rw,nosuid,nodev,noexec,relatime
| `-/sys/kernel/config        configfs   configfs   rw,nosuid,nodev,noexec,relatime
|-/proc                       proc       proc       rw,nosuid,nodev,noexec,relatime
| `-/proc/sys/fs/binfmt_misc  systemd-1  autofs     rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=10697
|-/dev                        udev       devtmpfs   rw,nosuid,relatime,size=3989856k,nr_inodes=997464,mode=755
| |-/dev/pts                  devpts     devpts     rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| |-/dev/shm                  tmpfs      tmpfs      rw,nosuid,nodev
| |-/dev/hugepages            hugetlbfs  hugetlbfs  rw,relatime,pagesize=2M
| `-/dev/mqueue               mqueue     mqueue     rw,nosuid,nodev,noexec,relatime
|-/run                        tmpfs      tmpfs      rw,nosuid,nodev,noexec,relatime,size=799448k,mode=755
| |-/run/lock                 tmpfs      tmpfs      rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/rpc_pipefs           sunrpc     rpc_pipefs rw,relatime
| `-/run/user/1002            tmpfs      tmpfs      rw,nosuid,nodev,relatime,size=799448k,nr_inodes=199862,mode=700,uid=1002,gid=1002
`-/boot/efi                   /dev/sda1  vfat       rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro

Files in neuralgic directories:

/var:
8.7G    /var/
4.4G    /var/lib
4.2G    /var/log
4.0G    /var/log/journal/b8af39a4a3f84f64bf60ee5243aa6c0c
4.0G    /var/log/journal

Archived and active journals take up 3.9G in the file system.

/opt/iobroker/backups:
714M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
247M    /opt/iobroker/iobroker-data/
111M    /opt/iobroker/iobroker-data/files
63M     /opt/iobroker/iobroker-data/backup-objects
36M     /opt/iobroker/iobroker-data/node-red
35M     /opt/iobroker/iobroker-data/node-red/node_modules

The five largest files in iobroker-data are:
27M     /opt/iobroker/iobroker-data/objects.jsonl
12M     /opt/iobroker/iobroker-data/states.jsonl
12M     /opt/iobroker/iobroker-data/files/javascript.admin/static/js/2.ea6ad656.chunk.js.map
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
6.2M    /opt/iobroker/iobroker-data/files/iot.admin/static/js/2.1d439ead.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2141436-if00

Your zigbee.0 COM-Port is matching 'by-id'. Very good!



*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            9.2.0
/usr/bin/npx            9.2.0
corepack:       N/A
*** nodejs is NOT correctly installed ***

nodejs:
  Installed: 18.19.0+dfsg-6~deb12u1
  Candidate: 18.19.0+dfsg-6~deb12u1
  Version table:
 *** 18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main amd64 Packages
        100 /var/lib/dpkg/status
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.2.23
javascript:     5.7.0

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : zbox                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : zbox                                     -  enabled
+ system.adapter.backitup.0               : backitup              : zbox                                     -  enabled
  system.adapter.cloud.0                  : cloud                 : zbox                                     - disabled
  system.adapter.daswetter.0              : daswetter             : zbox                                     - disabled
+ system.adapter.discovery.0              : discovery             : zbox                                     - disabled
+ system.adapter.fakeroku.0               : fakeroku              : zbox                                     -  enabled
+ system.adapter.harmony.0                : harmony               : zbox                                     -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : zbox                                     -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : zbox                                     -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : zbox                                     -  enabled, port: 0
+ system.adapter.homeconnect.0            : homeconnect           : zbox                                     -  enabled
+ system.adapter.influxdb.0               : influxdb              : zbox                                     -  enabled, port: 8086
+ system.adapter.iot.0                    : iot                   : zbox                                     -  enabled
+ system.adapter.javascript.0             : javascript            : zbox                                     -  enabled
  system.adapter.kodi.0                   : kodi                  : zbox                                     - disabled, port: 9090
  system.adapter.linux-control.0          : linux-control         : zbox                                     -  enabled
  system.adapter.mclighting.0             : mclighting            : zbox                                     - disabled, port: 81
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : zbox                                     - disabled, port: 54321
+ system.adapter.modbus.0                 : modbus                : zbox                                     -  enabled
+ system.adapter.modbus.1                 : modbus                : zbox                                     -  enabled
+ system.adapter.modbus.2                 : modbus                : zbox                                     -  enabled
+ system.adapter.modbus.3                 : modbus                : zbox                                     -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : zbox                                     -  enabled, port: 1883, bind: 192.168.1.171
  system.adapter.mqtt.2                   : mqtt                  : zbox                                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.3                   : mqtt                  : zbox                                     -  enabled, port: 1885, bind: 0.0.0.0
  system.adapter.mqtt.4                   : mqtt                  : zbox                                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.5                   : mqtt                  : zbox                                     -  enabled, port: 1888, bind: 0.0.0.0
+ system.adapter.net-tools.0              : net-tools             : zbox                                     -  enabled
+ system.adapter.node-red.0               : node-red              : zbox                                     -  enabled, port: 1880, bind: 192.168.1.171
  system.adapter.octoprint.0              : octoprint             : zbox                                     - disabled
+ system.adapter.parser.0                 : parser                : zbox                                     -  enabled
+ system.adapter.ping.0                   : ping                  : zbox                                     -  enabled
+ system.adapter.pvforecast.0             : pvforecast            : zbox                                     -  enabled
+ system.adapter.shelly.0                 : shelly                : zbox                                     -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.solax.0                  : solax                 : zbox                                     -  enabled
  system.adapter.sonoff.0                 : sonoff                : zbox                                     - disabled, port: 1883, bind: 0.0.0.0
  system.adapter.spotify-premium.0        : spotify-premium       : zbox                                     - disabled
  system.adapter.telegram.0               : telegram              : zbox                                     -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.telegram.1               : telegram              : zbox                                     -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.text2command.0           : text2command          : zbox                                     -  enabled
+ system.adapter.tibberlink.0             : tibberlink            : zbox                                     -  enabled
  system.adapter.unifi.0                  : unifi                 : zbox                                     - disabled
  system.adapter.web.0                    : web                   : zbox                                     -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : zbox                                     -  enabled
+ system.adapter.whatsapp-cmb.1           : whatsapp-cmb          : zbox                                     -  enabled
+ system.adapter.whatsapp-cmb.2           : whatsapp-cmb          : zbox                                     -  enabled
+ system.adapter.zigbee.0                 : zigbee                : zbox                                     -  enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2141436-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : zbox                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : zbox                                     -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : zbox                                     -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : zbox                                     -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : zbox                                     -  enabled, port: 1883, bind: 192.168.1.171
  system.adapter.mqtt.2                   : mqtt                  : zbox                                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.3                   : mqtt                  : zbox                                     -  enabled, port: 1885, bind: 0.0.0.0
  system.adapter.mqtt.4                   : mqtt                  : zbox                                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.mqtt.5                   : mqtt                  : zbox                                     -  enabled, port: 1888, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : zbox                                     -  enabled, port: 1880, bind: 192.168.1.171
+ system.adapter.shelly.0                 : shelly                : zbox                                     -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.telegram.0               : telegram              : zbox                                     -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.telegram.1               : telegram              : zbox                                     -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.web.0                    : web                   : zbox                                     -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : zbox                                     -  enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2141436-if00

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.2.23 [Updatable]
Adapter    "alexa2"       : 3.26.5   , installed 3.25.5 [Updatable]
Adapter    "backitup"     : 2.11.0   , installed 2.5.4  [Updatable]
Adapter    "bshb"         : 0.2.7    , installed 0.2.4  [Updatable]
Adapter    "cloud"        : 5.0.1    , installed 4.3.0  [Updatable]
Adapter    "daswetter"    : 3.1.13   , installed 3.1.8  [Updatable]
Adapter    "deconz"       : 1.4.0    , installed 1.3.21 [Updatable]
Adapter    "discovergy"   : 0.5.13   , installed 0.5.8  [Updatable]
Adapter    "discovery"    : 4.4.0    , installed 3.1.0  [Updatable]
Adapter    "fakeroku"     : 0.2.2    , installed 0.2.2
Adapter    "harmony"      : 1.4.0    , installed 1.2.2  [Updatable]
Adapter    "hm-rega"      : 4.0.0    , installed 3.0.40 [Updatable]
Adapter    "hm-rpc"       : 1.17.0   , installed 1.15.12 [Updatable]
Adapter    "homeconnect"  : 1.3.0    , installed 1.1.1  [Updatable]
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 2.0.11   , installed 1.11.4 [Updatable]
Adapter    "javascript"   : 7.8.0    , installed 5.7.0  [Updatable]
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "kodi"         : 3.0.0    , installed 2.0.8  [Updatable]
Adapter    "linux-control": 1.1.5    , installed 1.1.5
Adapter    "mclighting"   : 0.1.2    , installed 0.1.2
Adapter    "mihome"       : 1.4.0    , installed 1.4.0
Adapter    "mihome-vacuum": 4.2.0    , installed 3.8.6  [Updatable]
Adapter    "modbus"       : 6.1.0    , installed 4.0.4  [Updatable]
Adapter    "mqtt"         : 5.2.0    , installed 3.0.6  [Updatable]
Adapter    "net-tools"    : 1.0.11   , installed 0.2.0  [Updatable]
Adapter    "netatmo"      : 3.1.0    , installed 3.1.0
Adapter    "node-red"     : 5.2.1    , installed 3.3.0  [Updatable]
Adapter    "octoprint"    : 5.1.0    , installed 3.2.0  [Updatable]
Adapter    "opi"          : 0.1.2    , installed 0.1.1  [Updatable]
Adapter    "parser"       : 2.1.0    , installed 1.1.8  [Updatable]
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pvforecast"   : 2.9.1    , installed 2.9.0  [Updatable]
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.9.0    , installed 5.3.2  [Updatable]
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.7.0    , installed 4.2.0  [Updatable]
Adapter    "solax"        : 0.9.6    , installed 0.7.7  [Updatable]
Adapter    "sonoff"       : 3.0.3    , installed 2.5.1  [Updatable]
Adapter    "spotify-premium": 1.4.0  , installed 1.2.1  [Updatable]
Adapter    "systeminfo"   : 1.1.0    , installed 0.3.1  [Updatable]
Adapter    "telegram"     : 3.2.1    , installed 1.12.6 [Updatable]
Adapter    "text2command" : 3.0.3    , installed 2.2.1  [Updatable]
Adapter    "tibberlink"   : 2.3.2    , installed 1.4.2  [Updatable]
Adapter    "tinker"       : 1.3.2    , installed 1.1.1  [Updatable]
Adapter    "tuya"         : 3.15.0   , installed 3.15.0
Adapter    "unifi"        : 0.7.0    , installed 0.5.10 [Updatable]
Adapter    "vis"          : 1.5.4    , installed 1.4.16 [Updatable]
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "web"          : 6.2.5    , installed 4.3.0  [Updatable]
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "ws"           : 2.6.1    , installed 1.3.0  [Updatable]
Adapter    "zigbee"       : 1.10.3   , installed 1.10.3

Objects and States
Please stand by - This may take a while
Objects:        26883
States:         21788

*** OS-Repositories and Updates ***
E: The repository 'http://ftp.nl.debian.org/debian stretch Release' does not have a Release file.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/3.2 Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D68FA50FEA312927
Pending Updates: 419

*** Listening Ports ***


*** Log File - Last 25 Lines ***

2024-05-10 09:16:47.384  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:16:52.167  - info: influxdb.0 (870) Store 51 buffered influxDB history points
2024-05-10 09:16:52.424  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:16:57.384  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:17:01.898  - info: influxdb.0 (870) Store 51 buffered influxDB history points
2024-05-10 09:17:02.424  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:17:07.384  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:17:09.299  - info: influxdb.0 (870) Store 52 buffered influxDB history points
2024-05-10 09:17:12.424  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:17:15.544  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:17:18.954  - info: influxdb.0 (870) Store 51 buffered influxDB history points
2024-05-10 09:17:22.424  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:17:27.086  - info: influxdb.0 (870) Store 51 buffered influxDB history points
2024-05-10 09:17:27.384  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:17:32.424  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:17:35.680  - info: influxdb.0 (870) Store 51 buffered influxDB history points
2024-05-10 09:17:37.394  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:17:42.005  - info: influxdb.0 (870) Store 51 buffered influxDB history points
2024-05-10 09:17:42.425  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:17:47.384  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:17:50.094  - info: influxdb.0 (870) Store 51 buffered influxDB history points
2024-05-10 09:17:52.424  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:17:57.384  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80
2024-05-10 09:18:01.101  - info: influxdb.0 (870) Store 51 buffered influxDB history points
2024-05-10 09:18:02.424  - error: parser.0 (2395) Cannot read link "http://192.168.178.80/json": Error: connect EHOSTUNREACH 192.168.178.80:80

============ Mark until here for C&P =============

iob diag has finished.

rccardany

@rccardany

======================= SUMMARY =======================
v.2024-04-21

Static hostname: zbox
Icon name: computer-desktop
Chassis: desktop
Operating System: Debian GNU/Linux 11 (bullseye)
Kernel: Linux 5.10.0-21-amd64
Architecture: x86-64

Installation: native
Kernel: x86_64
Userland: 64 bit
Timezone: Europe/Berlin (CEST, +0200)
User-ID: 0
Display-Server: false
Boot Target: graphical.target

Pending OS-Updates: 419
Pending iob updates: 39

Nodejs-Installation:
/usr/bin/nodejs v18.19.0
/usr/bin/node v18.19.0
/usr/bin/npm 9.2.0
/usr/bin/npx 9.2.0
corepack: N/A

Recommended versions are nodejs 16.20.2 and npm 8.19.4
*** nodejs is NOT correctly installed ***
Wrong installation path detected. This needs to be fixed

Please execute
iobroker nodejs-update
to fix these errors.

MEMORY:
total used free shared buff/cache available
Mem: 7.8G 3.9G 2.4G 0.0K 1.5G 3.8G
Swap: 976M 0B 976M
Total: 8.8G 3.9G 3.3G

Active iob-Instances: 34
Active repo(s): stable

ioBroker Core: js-controller 5.0.19
admin 6.2.23

ioBroker Status: iobroker is running on this host.

Objects type: jsonl
States type: jsonl

Status admin and web instance:

system.adapter.admin.0 : admin : zbox - enabled, port: 8081, bind: 0.0.0.0, run as: admin
system.adapter.web.0 : web : zbox - enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects: 26883
States: 21788

Size of iob-Database:

27M /opt/iobroker/iobroker-data/objects.jsonl
12M /opt/iobroker/iobroker-data/states.jsonl

=================== END OF SUMMARY ====================


=== Mark text until here for copying ===

Thomas Braun

@rccardany

Hampel da nicht als root herum. User anlegen und den verwenden.

*** nodejs is NOT correctly installed ***

Falsches nodejs. Bring das auf die nodesource-Variante:

iob nodejs-update

Pending OS-Updates: 419
Pending iob updates: 39

Ist nicht dein Ernst, oder?
Zeig mal die Datei /etc/apt/sources.list her.

cat /etc/apt/sources.list

rccardany

@thomas-braun said in Zigbee Conbee:

cat /etc/apt/sources.list

ioBroker nodejs updater 2023-10-13

Recommended nodejs-version is: 16.20.2
Checking your installation now. Please be patient!

Your current setup is:
/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            9.2.0
/usr/bin/npx            9.2.0

We found these nodejs versions available for installation:

nodejs:
  Installed: 18.19.0+dfsg-6~deb12u1
  Candidate: 18.19.0+dfsg-6~deb12u1
  Version table:
 *** 18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main amd64 Packages
        100 /var/lib/dpkg/status
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main amd64 Packages



Nothing to do - Your installation is using the correct paths.

You are running nodejs v18.19.0. Do you want to install recommended version 16.20.2?

Press <y> to continue or any other key to quit
We are not updating your installation. Exiting.
root@zbox:/home/pi# cat /etc/apt/sources.list
deb http://deb.debian.org/debian bookworm main non-free-firmware
deb-src http://deb.debian.org/debian bookworm main non-free-firmware

deb http://deb.debian.org/debian-security/ bookworm-security main non-free-firmware
deb-src http://deb.debian.org/debian-security/ bookworm-security main non-free-firmware

deb http://deb.debian.org/debian bookworm-updates main non-free-firmware
deb-src http://deb.debian.org/debian bookworm-updates main non-free-firmware
root@zbox:/home/pi#

Thomas Braun

@rccardany sagte in Zigbee Conbee:

root@zbox:/home/pi

Du hampelst ja immer noch als root herum...
Ich bin dann raus. Meld dich als pi oder was auch immer da noch an usern vorhanden ist an und arbeite ordentlich mit dem System.

rccardany

@thomas-braun

naja ich habe den iobroker installiert und wüsste nicht dass ich dazu einen passwort vergeben habe
wenn ich mich als pi anmelde dann will er, dass ich den Befehl als admin ausführe:

pi@zbox:~$ iob nodejs-update
[sudo] Passwort für pi:
Leider darf der Benutzer pi »/usr/bin/curl -sLf https://iobroker.net/node-update.sh --output /home/iobroker/.nodejs-update.sh« als iobroker auf zbox.default nicht ausführen.
pi@zbox:~$

Thomas Braun

@rccardany

Dann ist der pi nicht in den richtigen Gruppen enthalten. Also falsch konfiguriert worden...
Ist der wenigstens bei 'sudo' drin?

sudo usermod -a -G iobroker pi
exit

rccardany

@thomas-braun said in Zigbee Conbee:

sudo usermod -a -G iobroker pi
exit

anbei dir RM

pi@zbox:~$ sudo usermod -a -G iobroker pi
[sudo] Passwort für pi:
Leider darf der Benutzer pi »/usr/sbin/usermod -a -G iobroker pi« als root auf z                                                                                                             box.default nicht ausführen.

Thomas Braun

@rccardany

apt policy sudo 
groups

sagt?

rccardany

@thomas-braun said in Zigbee Conbee:

groups

pi@zbox:~$ apt policy sudo
sudo:
  Installiert:           1.9.5p2-3+deb11u1
  Installationskandidat: 1.9.13p3-1+deb12u1
  Versionstabelle:
     1.9.13p3-1+deb12u1 500
        500 http://deb.debian.org/debian bookworm/main amd64 Packages
 *** 1.9.5p2-3+deb11u1 100
        100 /var/lib/dpkg/status
pi@zbox:~$ groups
pi dialout iobroker
pi@zbox:~$

Thomas Braun

@rccardany

Dann als root:

usermod -a -G sudo pi

Dann wieder als pi anmelden und den Mist mit dem root sein lassen.

rccardany

@thomas-braun erledigt und nun?

Thomas Braun

@rccardany

sudo whoami
grep stretch -R /etc/apt/*

rccardany

@rccardany

pi@testpi:~ $ sudo whoami
root
pi@testpi:~ $ grep stretch -R /etc/apt/*

Community Forum

NEWS

Zigbee Conbee

Gernot

Support us

407

32.8k

82.8k

1.3m