Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[maximinus]

> In den Objekten und Instanzen finde ich mal keine Möglichkeit eine ip einzutragen und was ist mit id gemeint?

zuerst hatte ich auch keine Objekte im Baum. Nachdem das mit dem MFA erledigt war, kamen die Objekte aber IP war leer.

Gerhard

[Duffy]

@maximinus

Hallo maximus,

die 2 Faktor Authentifizierung habe ich eingeschaltet. Wenn ich mich auf meinem Ipad einlogge kommt auch auf dem iphone ein entsprechender MFA Code um diesen im ipad einzugeben. Das ipad funktioniert dann auch.

Aber wie bekomme ich so eine Code für den iob?
Mail und PW habe ich in den Adapter eingetragen und gespeichert und neu gestartet. Es kommt aber kein Code auf das Handy.

Kannst mir das bitte noch verraten?

Eine keine Beschreibung auf Github hätte bestimmt nicht geschadete ;-) ; hoffentlich lohnt sich der Aufwand auch wenn schon zum Begin nichts funktioniert :disappointed_relieved:

Gruß Duffy

Edit: nach der Deinstallation und Neuinstalkation des Adapters mit erneuter Eingabe der Zugangsdaten bekam ich auch einen Code auf das Handy.

Ich werde aber auch großzügig mit Fehlermeldungen bedacht.

tapo.0
2024-03-13 18:23:10.904	error	Error: Unable to find token in response, probably your credentials are not valid. Please make sure you set your TAPO Cloud password

tapo.0
2024-03-13 18:23:00.950	error	Error: Unable to find token in response, probably your credentials are not valid. Please make sure you set your TAPO Cloud password

tapo.0
2024-03-13 18:22:50.899	error	Error: Unable to find token in response, probably your credentials are not valid. Please make sure you set your TAPO Cloud password

tapo.0
2024-03-13 18:22:40.871	error	Error: Unable to find token in response, probably your credentials are not valid. Please make sure you set your TAPO Cloud password

tapo.0
2024-03-13 18:22:30.745	info	Wait for connections

tapo.0
2024-03-13 18:22:30.644	error	Error: ONVIF SOAP Fault: Authority failure

tapo.0
2024-03-13 18:22:30.333	warn	No stream username or password. No motion detection available

tapo.0
2024-03-13 18:22:30.332	info	Init device 8021CA8CC4C387AB31636CB5BF621BBC21FBCFED type C200 with ip 192.168.178.108

tapo.0
2024-03-13 18:22:30.067	info	Found 1 devices

tapo.0
2024-03-13 18:22:29.856	info	Login succesfull

tapo.0
2024-03-13 18:22:29.139	info	Login tp TAPO App

tapo.0
2024-03-13 18:22:28.999	info	starting. Version 0.0.8 in /opt/iobroker/node_modules/iobroker.tapo, node: v18.19.0, js-controller: 5.0.19

tapo.0
2024-03-13 18:22:17.535	info	terminating

tapo.0
2024-03-13 18:22:17.033	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

tapo.0
2024-03-13 18:22:17.031	info	terminating

tapo.0
2024-03-13 18:22:17.029	info	Got terminate signal TERMINATE_YOURSELF

tapo.0
2024-03-13 18:22:08.186	error	Error: Unable to find token in response, probably your credentials are not valid. Please make sure you set your TAPO Cloud password

tapo.0
2024-03-13 18:21:58.187	error	Error: Unable to find token in response, probably your credentials are not valid. Please make sure you set your TAPO Cloud password

tapo.0
2024-03-13 18:21:48.188	error	Error: Unable to find token in response, probably your credentials are not valid. Please make sure you set your TAPO Cloud password

[maximinus]

@duffy

Leider habe ich die einzelnen Schritte bei der Installation das Adapters nicht mitprotokolliert. An das woran ich mich erinnere habe ich zuvor schon gepostet. Ich hatte zuerst Probleme überhaupt herauszufinden was MFA Code bedeutet und dann irgendwo gefunden dass es 2FA meint, Ich habe dann den gleichen Code vom Telefon dort eingetragen und es ging. Später habe ich die 2FA in der App wieder deaktiviert. Das wars. Auf die Anfrage bei Github ob der Adapter ohne Cloud überhaupt funktioniert ist bis heute keine Antwort gekommen. (https://github.com/TA2k/ioBroker.tapo/issues/35).
Aktueller Stand: er lässt sich einschalten, bringt laufend die Fehlermeldung wegen der Cloud und hat keine sinnvoll auswertbaren Datenpunkte.

Gerhard

[Duffy]

@maximinus

Dem kann ich mir nur anschließen.
Vielleicht kommt ja noch eine Antwort auf Github ansonsten trenne ich mich halt wieder von dem Adapter.

Meine Hoffnung war ja das ich die Camera ohne Cloud bzw. Chinesische Unterstützung steuern kann aber selbst das geht aus der Beschreibung ja nicht hervor.

Schade.

VG Duffy

[Duffy]

@maximinus

Hi maximinus,

Ich habe gesehen das du über github eine Antwort bekommen hast.

Bist du damit weiter gekommen?

Gruss Duffy

[maximinus]

@duffy

Hallo, ich hatte das aus den Augen verloren. Wegen der Fehlermeldungen hatte ich den Adapter wieder gelöscht. Eben nochmals installiert. Leider das gleiche Ergebnis. Positiv ist zu vermerken, dass er die Bewegung meldet. motionEvent geht kurzzeitig auf true. Ich habe das Fehlerprotokoll auf Github gepostet, Vielleicht findet sich da eine Lösung.

Gerhard

[Duffy]

@maximinus

Danke für deine Antwort, dann werde ich das mal weiter verfolgen.
So wirklich hilfreich war die Antwort auf Github für mich ehrlich gesagt nicht.

Viele Grüße Duffy

[maximinus]

@duffy

Nachdem der Adapterentwickler auf Github empfohlen hatte die Version 0.2.9 zu verwenden, diese aber im ioBroker nicht zur Verfügung stand, habe ich nachdem ich die Version 0.0.2 über den Instanzentab entfernt hatte, mit npm install iobroker.tapo installiert.
Da nach einem Restart die Instanz tapo.0 nicht aufschien, mit sudo systemctl restart iobroker.service ohne Erfolg aktualisiert.

Darnach iobroker diag mit diesem Ergebnis

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: pivpn
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v8+
      Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.4
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : armhf

Systemuptime and Load:
 02:53:26 up 12:43,  1 user,  load average: 0.15, 0.11, 0.31
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Wed 2024-03-27 02:53:26 WET
           Universal time: Wed 2024-03-27 02:53:26 UTC
                 RTC time: n/a
                Time zone: Atlantic/Canary (WET, +0000)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            1.8G        666M        417M        3.0M        765M        1.1G
Swap:            99M         42M         57M
Total:          1.9G        709M        474M

         1849 M total memory
          666 M used memory
          288 M active memory
          931 M inactive memory
          417 M free memory
          123 M buffer memory
          641 M swap cache
           99 M total swap
           42 M used swap
           57 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* hciuart.service  loaded failed failed Configure Bluetooth Modems connected by UART
* iobroker.service loaded failed failed ioBroker Server

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
2 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G  9.1G   19G  33% /
devtmpfs       devtmpfs  667M     0  667M   0% /dev
tmpfs          tmpfs     925M  1.6M  924M   1% /dev/shm
tmpfs          tmpfs     370M  1.1M  369M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   51M  205M  20% /boot
tmpfs          tmpfs     185M     0  185M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Mar 26 14:10:14 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:20:8D:54 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=bd727156-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=AT
[Tue Mar 26 14:10:15 2024] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Mar 26 14:10:15 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Mar 26 14:10:16 2024] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Mar 26 14:10:16 2024] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
[Tue Mar 26 14:10:16 2024] EXT4-fs (mmcblk0p2): recovery complete
[Tue Mar 26 14:10:16 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Tue Mar 26 14:10:16 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Mar 26 14:10:18 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.6G    /var/
1.6G    /var/log
1.3G    /var/log/journal/8f8800bc2dd742ba810579339a904aaf
1.3G    /var/log/journal
540M    /var/cache

Archived and active journals take up 1.2G in the file system.

/opt/iobroker/backups:
2.2G    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
134M    /opt/iobroker/iobroker-data/
82M     /opt/iobroker/iobroker-data/files
67M     /opt/iobroker/iobroker-data/files/javascript.admin
48M     /opt/iobroker/iobroker-data/files/javascript.admin/static
47M     /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
13M     /opt/iobroker/iobroker-data/objects.jsonl
7.5M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.map
7.1M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.d3cce782.chunk.js.map
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
6.0M    /opt/iobroker/iobroker-data/states.jsonl

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.1
/usr/bin/node           v18.19.1
/usr/bin/npm            10.2.4
/usr/bin/npx            10.2.4
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.1-1nodesource1
  Candidate: 18.20.0-1nodesource1
  Version table:
     18.20.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
 *** 18.19.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.19.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:
npm ERR! code ELSPROBLEMS
npm ERR! extraneous: @ampproject/remapping@2.3.0 /opt/iobroker/node_modules/@ampproject/remapping
npm ERR! extraneous: @babel/code-frame@7.24.2 /opt/iobroker/node_modules/@babel/code-frame
npm ERR! extraneous: @babel/compat-data@7.24.1 /opt/iobroker/node_modules/@babel/compat-data
npm ERR! extraneous: @babel/core@7.24.3 /opt/iobroker/node_modules/@babel/core
npm ERR! extraneous: @babel/generator@7.24.1 /opt/iobroker/node_modules/@babel/generator
npm ERR! extraneous: @babel/helper-compilation-targets@7.23.6 /opt/iobroker/node_modules/@babel/helper-compilation-targets
npm ERR! extraneous: @babel/helper-environment-visitor@7.22.20 /opt/iobroker/node_modules/@babel/helper-environment-visitor
npm ERR! extraneous: @babel/helper-function-name@7.23.0 /opt/iobroker/node_modules/@babel/helper-function-name
npm ERR! extraneous: @babel/helper-hoist-variables@7.22.5 /opt/iobroker/node_modules/@babel/helper-hoist-variables
npm ERR! extraneous: @babel/helper-module-imports@7.24.3 /opt/iobroker/node_modules/@babel/helper-module-imports
npm ERR! extraneous: @babel/helper-module-transforms@7.23.3 /opt/iobroker/node_modules/@babel/helper-module-transforms
npm ERR! extraneous: @babel/helper-simple-access@7.22.5 /opt/iobroker/node_modules/@babel/helper-simple-access
npm ERR! extraneous: @babel/helper-split-export-declaration@7.22.6 /opt/iobroker/node_modules/@babel/helper-split-export-declaration
npm ERR! extraneous: @babel/helper-string-parser@7.24.1 /opt/iobroker/node_modules/@babel/helper-string-parser
npm ERR! extraneous: @babel/helper-validator-identifier@7.22.20 /opt/iobroker/node_modules/@babel/helper-validator-identifier
npm ERR! extraneous: @babel/helper-validator-option@7.23.5 /opt/iobroker/node_modules/@babel/helper-validator-option
npm ERR! extraneous: @babel/helpers@7.24.1 /opt/iobroker/node_modules/@babel/helpers
npm ERR! extraneous: @babel/highlight@7.24.2 /opt/iobroker/node_modules/@babel/highlight
npm ERR! extraneous: @babel/parser@7.24.1 /opt/iobroker/node_modules/@babel/parser
npm ERR! extraneous: @babel/template@7.24.0 /opt/iobroker/node_modules/@babel/template
npm ERR! extraneous: @babel/traverse@7.24.1 /opt/iobroker/node_modules/@babel/traverse
npm ERR! extraneous: @babel/types@7.24.0 /opt/iobroker/node_modules/@babel/types
npm ERR! extraneous: @emnapi/core@1.1.0 /opt/iobroker/node_modules/@emnapi/core
npm ERR! extraneous: @emnapi/runtime@1.1.0 /opt/iobroker/node_modules/@emnapi/runtime
npm ERR! extraneous: @istanbuljs/load-nyc-config@1.1.0 /opt/iobroker/node_modules/@istanbuljs/load-nyc-config
npm ERR! extraneous: @istanbuljs/schema@0.1.3 /opt/iobroker/node_modules/@istanbuljs/schema
npm ERR! extraneous: @jridgewell/gen-mapping@0.3.5 /opt/iobroker/node_modules/@jridgewell/gen-mapping
npm ERR! extraneous: @jridgewell/resolve-uri@3.1.2 /opt/iobroker/node_modules/@jridgewell/resolve-uri
npm ERR! extraneous: @jridgewell/set-array@1.2.1 /opt/iobroker/node_modules/@jridgewell/set-array
npm ERR! extraneous: @jridgewell/sourcemap-codec@1.4.15 /opt/iobroker/node_modules/@jridgewell/sourcemap-codec
npm ERR! extraneous: @jridgewell/trace-mapping@0.3.25 /opt/iobroker/node_modules/@jridgewell/trace-mapping
npm ERR! extraneous: @napi-rs/wasm-runtime@0.1.2 /opt/iobroker/node_modules/@napi-rs/wasm-runtime
npm ERR! extraneous: @node-rs/jieba-android-arm-eabi@ /opt/iobroker/node_modules/@node-rs/jieba-android-arm-eabi
npm ERR! extraneous: @node-rs/jieba-android-arm64@ /opt/iobroker/node_modules/@node-rs/jieba-android-arm64
npm ERR! extraneous: @node-rs/jieba-darwin-arm64@ /opt/iobroker/node_modules/@node-rs/jieba-darwin-arm64
npm ERR! extraneous: @node-rs/jieba-darwin-x64@ /opt/iobroker/node_modules/@node-rs/jieba-darwin-x64
npm ERR! extraneous: @node-rs/jieba-freebsd-x64@ /opt/iobroker/node_modules/@node-rs/jieba-freebsd-x64
npm ERR! extraneous: @node-rs/jieba-linux-arm-gnueabihf@1.10.0 /opt/iobroker/node_modules/@node-rs/jieba-linux-arm-gnueabihf
npm ERR! extraneous: @node-rs/jieba-linux-arm64-gnu@ /opt/iobroker/node_modules/@node-rs/jieba-linux-arm64-gnu
npm ERR! extraneous: @node-rs/jieba-linux-arm64-musl@ /opt/iobroker/node_modules/@node-rs/jieba-linux-arm64-musl
npm ERR! extraneous: @node-rs/jieba-linux-x64-gnu@ /opt/iobroker/node_modules/@node-rs/jieba-linux-x64-gnu
npm ERR! extraneous: @node-rs/jieba-linux-x64-musl@ /opt/iobroker/node_modules/@node-rs/jieba-linux-x64-musl
npm ERR! extraneous: @node-rs/jieba-wasm32-wasi@ /opt/iobroker/node_modules/@node-rs/jieba-wasm32-wasi
npm ERR! extraneous: @node-rs/jieba-win32-arm64-msvc@ /opt/iobroker/node_modules/@node-rs/jieba-win32-arm64-msvc
npm ERR! extraneous: @node-rs/jieba-win32-ia32-msvc@ /opt/iobroker/node_modules/@node-rs/jieba-win32-ia32-msvc
npm ERR! extraneous: @node-rs/jieba-win32-x64-msvc@ /opt/iobroker/node_modules/@node-rs/jieba-win32-x64-msvc
npm ERR! extraneous: @node-rs/jieba@1.10.0 /opt/iobroker/node_modules/@node-rs/jieba
npm ERR! extraneous: @tybys/wasm-util@0.8.1 /opt/iobroker/node_modules/@tybys/wasm-util
npm ERR! extraneous: @types/parse-json@4.0.2 /opt/iobroker/node_modules/@types/parse-json
npm ERR! extraneous: aggregate-error@3.1.0 /opt/iobroker/node_modules/aggregate-error
npm ERR! extraneous: append-transform@2.0.0 /opt/iobroker/node_modules/append-transform
npm ERR! extraneous: archy@1.0.0 /opt/iobroker/node_modules/archy
npm ERR! extraneous: babel-plugin-macros@2.8.0 /opt/iobroker/node_modules/babel-plugin-macros
npm ERR! extraneous: babel-plugin-preval@4.0.0 /opt/iobroker/node_modules/babel-plugin-preval
npm ERR! extraneous: browserslist@4.23.0 /opt/iobroker/node_modules/browserslist
npm ERR! extraneous: caching-transform@4.0.0 /opt/iobroker/node_modules/caching-transform
npm ERR! extraneous: callsites@3.1.0 /opt/iobroker/node_modules/callsites
npm ERR! extraneous: caniuse-lite@1.0.30001600 /opt/iobroker/node_modules/caniuse-lite
npm ERR! extraneous: clean-stack@2.2.0 /opt/iobroker/node_modules/clean-stack
npm ERR! extraneous: commander@1.1.1 /opt/iobroker/node_modules/commander
npm ERR! extraneous: commondir@1.0.1 /opt/iobroker/node_modules/commondir
npm ERR! extraneous: convert-source-map@1.9.0 /opt/iobroker/node_modules/convert-source-map
npm ERR! extraneous: cosmiconfig@6.0.0 /opt/iobroker/node_modules/cosmiconfig
npm ERR! extraneous: default-require-extensions@3.0.1 /opt/iobroker/node_modules/default-require-extensions
npm ERR! extraneous: electron-to-chromium@1.4.717 /opt/iobroker/node_modules/electron-to-chromium
npm ERR! extraneous: error-ex@1.3.2 /opt/iobroker/node_modules/error-ex
npm ERR! extraneous: es6-error@4.1.1 /opt/iobroker/node_modules/es6-error
npm ERR! extraneous: escape-string-regexp@1.0.5 /opt/iobroker/node_modules/escape-string-regexp
npm ERR! extraneous: esprima@4.0.1 /opt/iobroker/node_modules/esprima
npm ERR! extraneous: find-cache-dir@3.3.2 /opt/iobroker/node_modules/find-cache-dir
npm ERR! extraneous: foreground-child@2.0.0 /opt/iobroker/node_modules/foreground-child
npm ERR! extraneous: fromentries@1.3.2 /opt/iobroker/node_modules/fromentries
npm ERR! extraneous: gensync@1.0.0-beta.2 /opt/iobroker/node_modules/gensync
npm ERR! extraneous: get-package-type@0.1.0 /opt/iobroker/node_modules/get-package-type
npm ERR! extraneous: globals@11.12.0 /opt/iobroker/node_modules/globals
npm ERR! extraneous: hasha@5.2.2 /opt/iobroker/node_modules/hasha
npm ERR! extraneous: html-escaper@2.0.2 /opt/iobroker/node_modules/html-escaper
npm ERR! extraneous: import-fresh@3.3.0 /opt/iobroker/node_modules/import-fresh
npm ERR! extraneous: imurmurhash@0.1.4 /opt/iobroker/node_modules/imurmurhash
npm ERR! extraneous: indent-string@4.0.0 /opt/iobroker/node_modules/indent-string
npm ERR! extraneous: iobroker.lovelace@4.1.2 /opt/iobroker/node_modules/iobroker.lovelace
npm ERR! extraneous: iobroker.type-detector@3.0.5 /opt/iobroker/node_modules/iobroker.type-detector
npm ERR! extraneous: is-core-module@2.13.1 /opt/iobroker/node_modules/is-core-module
npm ERR! extraneous: is-windows@1.0.2 /opt/iobroker/node_modules/is-windows
npm ERR! extraneous: istanbul-lib-coverage@3.2.2 /opt/iobroker/node_modules/istanbul-lib-coverage
npm ERR! extraneous: istanbul-lib-hook@3.0.0 /opt/iobroker/node_modules/istanbul-lib-hook
npm ERR! extraneous: istanbul-lib-instrument@4.0.3 /opt/iobroker/node_modules/istanbul-lib-instrument
npm ERR! extraneous: istanbul-lib-processinfo@2.0.3 /opt/iobroker/node_modules/istanbul-lib-processinfo
npm ERR! extraneous: istanbul-lib-report@3.0.1 /opt/iobroker/node_modules/istanbul-lib-report
npm ERR! extraneous: istanbul-lib-source-maps@4.0.1 /opt/iobroker/node_modules/istanbul-lib-source-maps
npm ERR! extraneous: istanbul-reports@3.1.7 /opt/iobroker/node_modules/istanbul-reports
npm ERR! extraneous: js-tokens@4.0.0 /opt/iobroker/node_modules/js-tokens
npm ERR! extraneous: jsesc@2.5.2 /opt/iobroker/node_modules/jsesc
npm ERR! extraneous: json-parse-even-better-errors@2.3.1 /opt/iobroker/node_modules/json-parse-even-better-errors
npm ERR! extraneous: jstimezonedetect@1.0.7 /opt/iobroker/node_modules/jstimezonedetect
npm ERR! extraneous: keypress@0.1.0 /opt/iobroker/node_modules/keypress
npm ERR! extraneous: lines-and-columns@1.2.4 /opt/iobroker/node_modules/lines-and-columns
npm ERR! extraneous: lodash.flattendeep@4.4.0 /opt/iobroker/node_modules/lodash.flattendeep
npm ERR! extraneous: node-preload@0.2.1 /opt/iobroker/node_modules/node-preload
npm ERR! extraneous: node-releases@2.0.14 /opt/iobroker/node_modules/node-releases
npm ERR! extraneous: nodejieba@2.5.2 /opt/iobroker/node_modules/nodejieba
npm ERR! extraneous: nyc@15.1.0 /opt/iobroker/node_modules/nyc
npm ERR! extraneous: package-hash@4.0.0 /opt/iobroker/node_modules/package-hash
npm ERR! extraneous: parent-module@1.0.1 /opt/iobroker/node_modules/parent-module
npm ERR! extraneous: parse-json@5.2.0 /opt/iobroker/node_modules/parse-json
npm ERR! extraneous: path-parse@1.0.7 /opt/iobroker/node_modules/path-parse
npm ERR! extraneous: path-type@4.0.0 /opt/iobroker/node_modules/path-type
npm ERR! extraneous: pinyin@3.1.0 /opt/iobroker/node_modules/pinyin
npm ERR! extraneous: pkg-dir@4.2.0 /opt/iobroker/node_modules/pkg-dir
npm ERR! extraneous: preval.macro@4.0.0 /opt/iobroker/node_modules/preval.macro
npm ERR! extraneous: process-on-spawn@1.0.0 /opt/iobroker/node_modules/process-on-spawn
npm ERR! extraneous: release-zalgo@1.0.0 /opt/iobroker/node_modules/release-zalgo
npm ERR! extraneous: resolve-from@5.0.0 /opt/iobroker/node_modules/resolve-from
npm ERR! extraneous: resolve@1.22.8 /opt/iobroker/node_modules/resolve
npm ERR! extraneous: segmentit@2.0.3 /opt/iobroker/node_modules/segmentit
npm ERR! extraneous: spawn-wrap@2.0.0 /opt/iobroker/node_modules/spawn-wrap
npm ERR! extraneous: sprintf-js@1.0.3 /opt/iobroker/node_modules/sprintf-js
npm ERR! extraneous: strip-bom@4.0.0 /opt/iobroker/node_modules/strip-bom
npm ERR! extraneous: supports-preserve-symlinks-flag@1.0.0 /opt/iobroker/node_modules/supports-preserve-symlinks-flag
npm ERR! extraneous: test-exclude@6.0.0 /opt/iobroker/node_modules/test-exclude
npm ERR! extraneous: to-fast-properties@2.0.0 /opt/iobroker/node_modules/to-fast-properties
npm ERR! extraneous: translit-rus-eng@1.0.8 /opt/iobroker/node_modules/translit-rus-eng
npm ERR! extraneous: type-fest@0.8.1 /opt/iobroker/node_modules/type-fest
npm ERR! extraneous: typedarray-to-buffer@3.1.5 /opt/iobroker/node_modules/typedarray-to-buffer
npm ERR! extraneous: update-browserslist-db@1.0.13 /opt/iobroker/node_modules/update-browserslist-db
npm ERR! extraneous: write-file-atomic@3.0.3 /opt/iobroker/node_modules/write-file-atomic
npm ERR! extraneous: yaml@1.10.2 /opt/iobroker/node_modules/yaml
npm ERR! extraneous: convert-source-map@2.0.0 /opt/iobroker/node_modules/@babel/core/node_modules/convert-source-map
npm ERR! extraneous: debug@4.3.4 /opt/iobroker/node_modules/@babel/core/node_modules/debug
npm ERR! extraneous: ms@2.1.2 /opt/iobroker/node_modules/@babel/core/node_modules/ms
npm ERR! extraneous: semver@6.3.1 /opt/iobroker/node_modules/@babel/core/node_modules/semver
npm ERR! extraneous: lru-cache@5.1.1 /opt/iobroker/node_modules/@babel/helper-compilation-targets/node_modules/lru-cache
npm ERR! extraneous: semver@6.3.1 /opt/iobroker/node_modules/@babel/helper-compilation-targets/node_modules/semver
npm ERR! extraneous: yallist@3.1.1 /opt/iobroker/node_modules/@babel/helper-compilation-targets/node_modules/yallist
npm ERR! extraneous: ansi-styles@3.2.1 /opt/iobroker/node_modules/@babel/highlight/node_modules/ansi-styles
npm ERR! extraneous: chalk@2.4.2 /opt/iobroker/node_modules/@babel/highlight/node_modules/chalk
npm ERR! extraneous: has-flag@3.0.0 /opt/iobroker/node_modules/@babel/highlight/node_modules/has-flag
npm ERR! extraneous: supports-color@5.5.0 /opt/iobroker/node_modules/@babel/highlight/node_modules/supports-color
npm ERR! extraneous: debug@4.3.4 /opt/iobroker/node_modules/@babel/traverse/node_modules/debug
npm ERR! extraneous: ms@2.1.2 /opt/iobroker/node_modules/@babel/traverse/node_modules/ms
npm ERR! extraneous: argparse@1.0.10 /opt/iobroker/node_modules/@istanbuljs/load-nyc-config/node_modules/argparse
npm ERR! extraneous: js-yaml@3.14.1 /opt/iobroker/node_modules/@istanbuljs/load-nyc-config/node_modules/js-yaml
npm ERR! invalid: @node-rs/jieba-android-arm-eabi@ /opt/iobroker/node_modules/@node-rs/jieba-android-arm-eabi
npm ERR! invalid: @node-rs/jieba-android-arm64@ /opt/iobroker/node_modules/@node-rs/jieba-android-arm64
npm ERR! invalid: @node-rs/jieba-darwin-arm64@ /opt/iobroker/node_modules/@node-rs/jieba-darwin-arm64
npm ERR! invalid: @node-rs/jieba-darwin-x64@ /opt/iobroker/node_modules/@node-rs/jieba-darwin-x64
npm ERR! invalid: @node-rs/jieba-freebsd-x64@ /opt/iobroker/node_modules/@node-rs/jieba-freebsd-x64
npm ERR! invalid: @node-rs/jieba-linux-arm64-gnu@ /opt/iobroker/node_modules/@node-rs/jieba-linux-arm64-gnu
npm ERR! invalid: @node-rs/jieba-linux-arm64-musl@ /opt/iobroker/node_modules/@node-rs/jieba-linux-arm64-musl
npm ERR! invalid: @node-rs/jieba-linux-x64-gnu@ /opt/iobroker/node_modules/@node-rs/jieba-linux-x64-gnu
npm ERR! invalid: @node-rs/jieba-linux-x64-musl@ /opt/iobroker/node_modules/@node-rs/jieba-linux-x64-musl
npm ERR! invalid: @node-rs/jieba-wasm32-wasi@ /opt/iobroker/node_modules/@node-rs/jieba-wasm32-wasi
npm ERR! invalid: @node-rs/jieba-win32-arm64-msvc@ /opt/iobroker/node_modules/@node-rs/jieba-win32-arm64-msvc
npm ERR! invalid: @node-rs/jieba-win32-ia32-msvc@ /opt/iobroker/node_modules/@node-rs/jieba-win32-ia32-msvc
npm ERR! invalid: @node-rs/jieba-win32-x64-msvc@ /opt/iobroker/node_modules/@node-rs/jieba-win32-x64-msvc
npm ERR! extraneous: is-arrayish@0.2.1 /opt/iobroker/node_modules/error-ex/node_modules/is-arrayish
npm ERR! extraneous: resolve-from@4.0.0 /opt/iobroker/node_modules/import-fresh/node_modules/resolve-from
npm ERR! extraneous: semver@6.3.1 /opt/iobroker/node_modules/istanbul-lib-instrument/node_modules/semver
npm ERR! extraneous: p-map@3.0.0 /opt/iobroker/node_modules/istanbul-lib-processinfo/node_modules/p-map
npm ERR! extraneous: uuid@8.3.2 /opt/iobroker/node_modules/istanbul-lib-processinfo/node_modules/uuid
npm ERR! extraneous: make-dir@4.0.0 /opt/iobroker/node_modules/istanbul-lib-report/node_modules/make-dir
npm ERR! extraneous: debug@4.3.4 /opt/iobroker/node_modules/istanbul-lib-source-maps/node_modules/debug
npm ERR! extraneous: ms@2.1.2 /opt/iobroker/node_modules/istanbul-lib-source-maps/node_modules/ms
npm ERR! extraneous: node-addon-api@3.2.1 /opt/iobroker/node_modules/nodejieba/node_modules/node-addon-api
npm ERR! extraneous: brace-expansion@1.1.11 /opt/iobroker/node_modules/nyc/node_modules/brace-expansion
npm ERR! extraneous: cliui@6.0.0 /opt/iobroker/node_modules/nyc/node_modules/cliui
npm ERR! extraneous: glob@7.2.3 /opt/iobroker/node_modules/nyc/node_modules/glob
npm ERR! extraneous: minimatch@3.1.2 /opt/iobroker/node_modules/nyc/node_modules/minimatch
npm ERR! extraneous: p-map@3.0.0 /opt/iobroker/node_modules/nyc/node_modules/p-map
npm ERR! extraneous: wrap-ansi@6.2.0 /opt/iobroker/node_modules/nyc/node_modules/wrap-ansi
npm ERR! extraneous: y18n@4.0.3 /opt/iobroker/node_modules/nyc/node_modules/y18n
npm ERR! extraneous: yargs-parser@18.1.3 /opt/iobroker/node_modules/nyc/node_modules/yargs-parser
npm ERR! extraneous: yargs@15.4.1 /opt/iobroker/node_modules/nyc/node_modules/yargs
npm ERR! extraneous: brace-expansion@1.1.11 /opt/iobroker/node_modules/test-exclude/node_modules/brace-expansion
npm ERR! extraneous: glob@7.2.3 /opt/iobroker/node_modules/test-exclude/node_modules/glob
npm ERR! extraneous: minimatch@3.1.2 /opt/iobroker/node_modules/test-exclude/node_modules/minimatch
npm ERR! invalid: fsevents@ /opt/iobroker/node_modules/fsevents

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-03-27T02_53_33_337Z-debug-0.log

*** ioBroker-Installation ***

ioBroker Status
iobroker is not running on this host.

No iobroker host is running.

Objects type: redis
States  type: redis

Core adapters versions
js-controller:  5.0.19
admin:          6.13.16
javascript:     7.8.0

Adapters from github:   0

Adapter State
  system.adapter.admin.0                  : admin                 : pivpn                                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa2.0                 : alexa2                : pivpn                                    -  enabled
  system.adapter.alias-manager.0          : alias-manager         : pivpn                                    -  enabled
  system.adapter.backitup.0               : backitup              : pivpn                                    -  enabled
  system.adapter.devices.0                : devices               : pivpn                                    -  enabled
  system.adapter.discovery.0              : discovery             : pivpn                                    -  enabled
  system.adapter.flot.0                   : flot                  : pivpn                                    -  enabled
  system.adapter.habpanel.0               : habpanel              : pivpn                                    -  enabled
  system.adapter.influxdb.0               : influxdb              : pivpn                                    -  enabled, port: 8086
  system.adapter.iqontrol.0               : iqontrol              : pivpn                                    -  enabled
  system.adapter.javascript.0             : javascript            : pivpn                                    -  enabled
  system.adapter.mqtt.0                   : mqtt                  : pivpn                                    - disabled, port: 1886, bind: 192.168.1.9
  system.adapter.node-red.0               : node-red              : pivpn                                    -  enabled, port: 1880, bind: 0.0.0.0
  system.adapter.parser.0                 : parser                : pivpn                                    - disabled
  system.adapter.rpi2.0                   : rpi2                  : pivpn                                    -  enabled
  system.adapter.sonoff.0                 : sonoff                : pivpn                                    -  enabled, port: 1500, bind: 0.0.0.0
  system.adapter.telegram.0               : telegram              : pivpn                                    -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.tuya.0                   : tuya                  : pivpn                                    -  enabled
  system.adapter.vis-2-widgets-energy.0   : vis-2-widgets-energy  : pivpn                                    -  enabled
  system.adapter.vis-2-widgets-gauges.0   : vis-2-widgets-gauges  : pivpn                                    -  enabled
  system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: pivpn                                    -  enabled
  system.adapter.vis-2.0                  : vis-2                 : pivpn                                    -  enabled
  system.adapter.vis-plumb.0              : vis-plumb             : pivpn                                    -  enabled
  system.adapter.vis.0                    : vis                   : pivpn                                    -  enabled
  system.adapter.web.0                    : web                   : pivpn                                    -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
  system.adapter.admin.0                  : admin                 : pivpn                                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.influxdb.0               : influxdb              : pivpn                                    -  enabled, port: 8086
  system.adapter.node-red.0               : node-red              : pivpn                                    -  enabled, port: 1880, bind: 0.0.0.0
  system.adapter.sonoff.0                 : sonoff                : pivpn                                    -  enabled, port: 1500, bind: 0.0.0.0
  system.adapter.telegram.0               : telegram              : pivpn                                    -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.web.0                    : web                   : pivpn                                    -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "alexa2"       : 3.26.4   , installed 3.26.4
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "backitup"     : 2.10.11  , installed 2.10.11
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 4.4.0    , installed 4.4.0
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzdect"    : 2.5.9    , installed 2.5.9
Adapter    "habpanel"     : 0.5.0    , installed 0.5.0
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iqontrol"     : 2.3.0    , installed 2.3.0
Adapter    "javascript"   : 7.8.0    , installed 7.8.0
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "lovelace"     : 4.1.2    , installed 4.1.2
Adapter    "mqtt"         : 5.2.0    , installed 5.2.0
Adapter    "node-red"     : 5.1.0    , installed 5.1.0
Adapter    "parser"       : 2.1.0    , installed 2.1.0
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.8.0    , installed 6.7.0  [Updatable]
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "tapo"         : 0.0.8    , installed 0.0.8
Adapter    "telegram"     : 3.1.0    , installed 3.1.0
Adapter    "tuya"         : 3.15.0   , installed 3.15.0
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-2"        : 2.9.32   , installed 2.9.32
Adapter    "vis-2-widgets-energy": 0.3.11, installed 0.3.9 [Updatable]
Adapter    "vis-2-widgets-gauges": 1.0.2, installed 1.0.2
Adapter    "vis-2-widgets-jaeger-design": 1.1.10, installed 1.1.10
Adapter    "vis-2-widgets-material": 1.3.18, installed 1.3.18
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "web"          : 6.2.3    , installed 6.2.3
Adapter    "ws"           : 2.5.10   , installed 2.5.10

Objects and States
Please stand by - This may take a while
Objects:        2301
States:         1682

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 https://repos.influxdata.com/debian bullseye InRelease
Hit:4 https://packages.grafana.com/oss/deb stable InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 1

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:514             0.0.0.0:*               LISTEN      0          14587      422/rsyslogd
tcp        0      0 127.0.0.1:6379          0.0.0.0:*               LISTEN      112        13080      525/redis-server 12
tcp        0      0 127.0.0.1:5335          0.0.0.0:*               LISTEN      0          15504      722/unbound
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      999        3847       766/pihole-FTL
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          3615       548/sshd: /usr/sbin
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN      998        14861      740/influxd
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      0          15578      840/lighttpd
tcp        0      0 127.0.0.1:4711          0.0.0.0:*               LISTEN      999        3853       766/pihole-FTL
tcp        0      0 127.0.0.1:8953          0.0.0.0:*               LISTEN      0          15505      722/unbound
tcp6       0      0 ::1:4711                :::*                    LISTEN      999        3854       766/pihole-FTL
tcp6       0      0 :::514                  :::*                    LISTEN      0          14588      422/rsyslogd
tcp6       0      0 :::3000                 :::*                    LISTEN      111        3955       882/grafana
tcp6       0      0 :::8086                 :::*                    LISTEN      998        15628      740/influxd
tcp6       0      0 ::1:6379                :::*                    LISTEN      112        13081      525/redis-server 12
tcp6       0      0 :::53                   :::*                    LISTEN      999        3849       766/pihole-FTL
tcp6       0      0 :::22                   :::*                    LISTEN      0          3617       548/sshd: /usr/sbin
tcp6       0      0 :::80                   :::*                    LISTEN      0          15579      840/lighttpd
udp        0      0 0.0.0.0:514             0.0.0.0:*                           0          14583      422/rsyslogd
udp        0      0 0.0.0.0:51820           0.0.0.0:*                           0          13230      -
udp        0      0 0.0.0.0:53              0.0.0.0:*                           999        3846       766/pihole-FTL
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          13101      736/dhcpcd
udp        0      0 127.0.0.1:5335          0.0.0.0:*                           0          15503      722/unbound
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12900      352/avahi-daemon: r
udp        0      0 0.0.0.0:41243           0.0.0.0:*                           108        12902      352/avahi-daemon: r
udp6       0      0 :::48490                :::*                                108        12903      352/avahi-daemon: r
udp6       0      0 :::514                  :::*                                0          14584      422/rsyslogd
udp6       0      0 :::51820                :::*                                0          13231      -
udp6       0      0 :::53                   :::*                                999        3848       766/pihole-FTL
udp6       0      0 :::5353                 :::*                                108        12901      352/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-03-27 02:36:19.517  - info: telegram.0 (2095) terminating
2024-03-27 02:36:19.523  - info: sonoff.0 (2205) terminating
2024-03-27 02:36:19.525  - info: telegram.0 (2095) Terminated (NO_ERROR): Without reason
2024-03-27 02:36:19.526  - info: sonoff.0 (2205) Terminated (NO_ERROR): Without reason
2024-03-27 02:36:19.539  - info: iqontrol.0 (2288) terminating
2024-03-27 02:36:19.555  - info: admin.0 (2025) terminating
2024-03-27 02:36:19.565  - info: javascript.0 (2051) terminating
2024-03-27 02:36:19.666  - info: host.pivpn instance system.adapter.node-red.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:19.810  - info: host.pivpn instance system.adapter.rpi2.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:19.812  - info: host.pivpn instance system.adapter.alexa2.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:19.813  - info: host.pivpn instance system.adapter.backitup.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:19.815  - info: host.pivpn instance system.adapter.discovery.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:19.816  - info: host.pivpn instance system.adapter.iqontrol.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:19.818  - info: host.pivpn instance system.adapter.vis-2.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:19.839  - info: host.pivpn instance system.adapter.admin.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:19.887  - info: host.pivpn instance system.adapter.javascript.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:19.889  - info: host.pivpn instance system.adapter.influxdb.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:19.890  - info: host.pivpn instance system.adapter.web.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:20.066  - info: host.pivpn instance system.adapter.telegram.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:20.079  - info: host.pivpn instance system.adapter.sonoff.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:22.012  - info: tuya.0 (2150) terminating
2024-03-27 02:36:22.013  - info: tuya.0 (2150) Terminated (NO_ERROR): Without reason
2024-03-27 02:36:22.551  - info: host.pivpn instance system.adapter.tuya.0 terminated with code 0 (NO_ERROR)
2024-03-27 02:36:22.552  - info: host.pivpn All instances are stopped.
2024-03-27 02:36:22.706  - info: host.pivpn terminated

============ Mark until here for C&P ===========

Danach wie empfohlen npm Log
ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-03-27T02_53_33_337Z-debug-0.log

pi@pivpn:~/.npm/_logs $ cat 2024-03-27T02_39_38_147Z-debug-0.log
0 verbose cli /usr/bin/node /usr/lib/node_modules/npm/bin/npm-cli.js
1 info using npm@10.2.4
2 info using node@v18.19.1
3 timing npm:load:whichnode Completed in 3ms
4 timing config:load:defaults Completed in 5ms
5 timing config:load:file:/usr/lib/node_modules/npm/npmrc Completed in 1ms
6 timing config:load:builtin Completed in 1ms
7 timing config:load:cli Completed in 8ms
8 timing config:load:env Completed in 1ms
9 timing config:load:file:/opt/iobroker/.npmrc Completed in 4ms
10 timing config:load:project Completed in 6ms
11 timing config:load:file:/home/pi/.npmrc Completed in 0ms
12 timing config:load:user Completed in 1ms
13 timing config:load:file:/usr/etc/npmrc Completed in 0ms
14 timing config:load:global Completed in 0ms
15 timing config:load:setEnvs Completed in 2ms
16 timing config:load Completed in 28ms
17 timing npm:load:configload Completed in 29ms
18 timing config:load:flatten Completed in 8ms
19 timing npm:load:mkdirpcache Completed in 1ms
20 timing npm:load:mkdirplogs Completed in 0ms
21 verbose title npm exec
22 verbose argv "exec" "--version"
23 timing npm:load:setTitle Completed in 3ms
24 timing npm:load:display Completed in 2ms
25 verbose logfile logs-max:10 dir:/home/pi/.npm/_logs/2024-03-27T02_39_38_147Z-
26 verbose logfile /home/pi/.npm/_logs/2024-03-27T02_39_38_147Z-debug-0.log
27 timing npm:load:logFile Completed in 25ms
28 timing npm:load:timers Completed in 0ms
29 timing npm:load:configScope Completed in 0ms
30 timing npm:load Completed in 118ms
31 verbose exit 0
32 timing npm Completed in 137ms
33 info ok
pi@pivpn:~/.npm/_logs $

Danach IOB fix

keine Änderung, iob Läuft, Instanz tapo.0 fehlt

Soll ich ein restore auf einen früheren Status machen oder lässt sich das beheben?

LG Gerhard

[DJMarc75]

@maximinus sagte in Tapo will sich mit der cloud verbinden:

Instanz tapo.0 fehlt

Die musst Du auch noch hinzufügen, da Du nur den Adapter installiert hast:

(unter Adapter)

[maximinus]

@djmarc75

Ich blicke da leider nicht durch. Ich dachte wenn ein Adapter installiert wird erzeugt er eine Instanz

Wenn ich unter Adapter den TAPO aufrufe um das "+" zu drücken, stehen nur die Versionen 0.0.2 bis 0.0.8 zur Verfügung, es soll aber 0.2.9 sein.

In der iob diag erscheint unter installierte Adapter tapo 0.0.8 auf, obwohl ich den doch zuvor entfernt hatte (die Angabe oben dass ich 0.0.2 entfernt hätte war falsch, es war 0.0.8)

Gerhard

[DJMarc75]

@maximinus

Dann stelle KURZ Dein Repository auf Beta um, installiere die aktuelle Version vom Tapo und stelle bitte das Repository gleich danach auf Stable zurück.

[Duffy]

@maximinus sagte in Tapo will sich mit der cloud verbinden:

Ich blicke da leider nicht durch. Ich dachte wenn ein Adapter installiert wird erzeugt er eine Instanz

Da bin ich auch immer von ausgegangen und bin beim simple-api auch schon drüber gestolpert.

[Thomas Braun]

@maximinus

Du steht im falschen Verzeichnis.
Am besten die Finger komplett von npm direkt lassen und den wrapper 'iobroker' dafür verwenden, der setzt die Verzeichnisse nämlich gleich richtig.
Vielleicht besser sogar noch über den Admin unter Experten-Optionen...

[Duffy]

@thomas-braun

Meine letzte Installation von Tapo hatte ich über "stable" gemacht aber inzwischen wieder gelöscht da es nicht funktioniert hatte.

[Thomas Braun]

@maximinus sagte in Tapo will sich mit der cloud verbinden:

Ich dachte wenn ein Adapter installiert wird erzeugt er eine Instanz

Nicht bei GitHub-Installationen.
Und nur, wenn man dem Kram nicht im Home des Users 'pi' installiert sondern im richtigen Verzeichnis.

[Duffy]

@thomas-braun

Man lernt nie aus.

Ich habe aber trotzdem noch eine Frage dazu.

Den simple-api Adapter hatte ich auch über Stable installiert und trotzdem musste ich erst auf das "+" klicken um eine Instanz zu bekommen.

Aber das soll es dann auch zu dem simple-api gewesen sein will nicht vom Thema ablenken, sorry.

[maximinus]

@DJMarc75

Im beta nur die Ver 0.2.0 verfügbar

@Thomas Braun

Du steht im falschen Verzeichnis.

Ja, das habe ich leider zu spät bemerkt. Mein Verzeichnis sieht jetzt so aus:

pi@pivpn:~ $ ls -lah
total 152K
drwxr-xr-x  10 pi   pi   4.0K Mar 27 02:36 .
drwxr-xr-x   4 root root 4.0K Dec 13 14:16 ..
-rw-------   1 pi   pi   7.2K Mar 27 02:56 .bash_history
-rw-r--r--   1 pi   pi    220 Dec  5 02:39 .bash_logout
-rw-r--r--   1 pi   pi   3.7K Mar 27 02:36 .bashrc
drwxr-xr-x   4 pi   pi   4.0K Dec 13 14:18 .cache
drwx------   3 pi   pi   4.0K Dec 14 01:01 .config
drwxrwxrwx   2 pi   pi   4.0K Dec 12 21:32 configs
-rw-r--r--   1 pi   pi    348 Feb 16 19:34 .influx_history
drwxr-xr-x   2 pi   pi   4.0K Dec 13 14:18 .iobroker
drwxr-xr-x   3 pi   pi   4.0K Dec 26 14:41 .local
drwxr-xr-x 162 pi   pi   4.0K Mar 27 02:24 node_modules
drwxr-xr-x   4 pi   pi   4.0K Dec 13 14:18 .npm
-rw-------   1 pi   pi     36 Dec 13 14:14 .npmrc
-rw-r--r--   1 pi   pi     58 Mar 27 02:24 package.json
-rw-r--r--   1 pi   pi    73K Mar 27 02:24 package-lock.json
-rw-r--r--   1 pi   pi    807 Dec  5 02:39 .profile
-rw-------   1 pi   pi    110 Dec 25 19:00 .rediscli_history
drwxr-xr-x   3 pi   pi   4.0K Dec 29 21:05 rpi-clone
pi@pivpn:~ $

Was alles muss da wieder weg?

Am besten die Finger komplett von npm direkt lassen und den wrapper 'iobroker' dafür verwenden, der setzt die Verzeichnisse nämlich gleich richtig.

Wäre mir ohnedies am liebsten gewesen; nur wusste/weiss ich nicht wie ich zu 0.2.9 komme. Ich habe mich davon verleiten lassen:

Vielleicht besser sogar noch über den Admin unter Experten-Optionen...

Mit Experten Einstellung und beta repositories bin ich jetzt auf Ver. 0.2.0

Der Adapter ist grün, hat die Kamera offline gemeldet - obwohl online - und empfohlen die IP manuell nachzutragen was ich gemacht habe. Es kommen keine Fehlermeldungen mehr aber jetzt gibt es den Datenpunkt motionEvent nicht mehr.

Das ist das log

tapo.0
	2024-03-27 17:55:17.488	info	Wait for connections
tapo.0
	2024-03-27 17:55:17.469	warn	No IP found for 802141D2D2775E47A3BDEA507CBF826921C449A4 put the device online or set the ip state manually
tapo.0
	2024-03-27 17:55:17.461	error	{"error_code":-20571,"msg":"Device is offline"}
tapo.0
	2024-03-27 17:55:17.160	warn	Error: write EPROTO 40F7ABF7:error:0A000152:SSL routines:final_renegotiate:unsafe legacy renegotiation disabled:../deps/openssl/openssl/ssl/statem/extensions.c:922:
tapo.0
	2024-03-27 17:55:16.744	info	Found 1 devices
tapo.0
	2024-03-27 17:55:16.456	info	Login succesfull
tapo.0
	2024-03-27 17:55:15.713	info	Login tp TAPO App
tapo.0
	2024-03-27 17:55:15.630	info	starting. Version 0.2.0 in /opt/iobroker/node_modules/iobroker.tapo, node: v18.19.1, js-controller: 5.0.19
tapo.0
	2024-03-27 17:55:10.726	info	terminating
tapo.0
	2024-03-27 17:55:10.222	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
tapo.0
	2024-03-27 17:55:10.219	info	terminating
tapo.0
	2024-03-27 17:55:10.210	info	Got terminate signal TERMINATE_YOURSELF
tapo.0
	2024-03-27 17:53:57.905	error	Please set username and password in the instance settings
tapo.0
	2024-03-27 17:53:57.880	info	starting. Version 0.2.0 in /opt/iobroker/node_modules/iobroker.tapo, node: v18.19.1, js-controller: 5.0.19

Die Kamera habe ich über die App neu gestartet aber im Log rührt sich nichts
Wahrscheinlichist es am besten zu warten bis 0.2.9 im beta oder stable ist.

Gerhard

[DJMarc75]

@maximinus sagte in Tapo will sich mit der cloud verbinden:

Im beta nur die Ver 0.2.0 verfügbar

na das wage ich zu bezweifeln :)

[maximinus]

@djmarc75

Das gibts doch nicht, Bei mir sieht das so aus

WARNUNG: Aktuelles Repository ist "beta". Benutzung auf eigene Gefahr!
	

Name
	

Beschreibung
		

Installiert
	

Verfügbar
	

Lizenz
	

Installieren
	
TP-Link Tapo
Adapter für TP-Link Tapo	
	
0.2.0 (1~)
	
0.2.0
	MIT	
	MIT

Das ist als beta Repository eingetragen

http://download.iobroker.net/sources-dist-latest.json

Ich habe da nie etwas verstellt. Ist das bei dir anders?

Gerhard

Wie kommt man zu der einzeiligen Darstellung? wenn ich das nebenstehende als Text markiere und als code formatiere entsteht das was da oben abgebildet ist.

[Thomas Braun]

@maximinus

iob update

sagt?