Kein Backup aufgrund fehlender Permissions

[JoergH]

@glasfaser Bevor jetzt einige hier beleidigt sind:

"Freak
Person, die eine bestimmte Sache exzessiv betreibt, sich mehr darin auskennt als andere"

Exzessiv stimmt bei mir auch, aber eher so wie ein Auto im Winter den verschneiten Hang hochfährt: viel Drehzahl, wenig Vorankommen

Ich habe keine Permissions vergeben, das ist wohl im Docker so.

[Thomas Braun]

@joergh

Ich bin aber kein Docker-Freak.

[JoergH]

@thomas-braun Weisst Du denn wie ich die Permissions auf iobroker:iobroker bekomme, so wie @Glasfaser meint?

[Thomas Braun]

@joergh

Beim Docker nicht, das ist alles anders da.
Dafür muss man ein Docker-Freak sein.

[Glasfaser]

@joergh sagte in Kein Backup aufgrund fehlender Permissions:

Ich habe keine Permissions vergeben, das ist wohl im Docker so.

Standart ist

iobroker : iobroker

deshalb wundert es mich bei dir !?

Docker über Portainer installiert !?

[JoergH]

@thomas-braun Achso...schade. Dachte man könne das im Docker in der Konsole bearbeiten..

[JoergH]

@glasfaser

Docker über Portainer installiert !?

Nein. Ganz "normal" über Apps in Unraid. Ich habe aber danach ein Backup von meinem iobroker auf dem pi drübergespielt...könnte das damit zusammenhängen?

[Glasfaser]

@joergh

Nein. Ganz "normal" über Apps in Unraid.

Da kann ich dir leider nicht helfen .!

Für andere mitlesende als Info von dir :

Aber , welche NAS hast du
und zeige mal die Full -Ausgabe von

iob diag

[JoergH]

@glasfaser sagte in Kein Backup aufgrund fehlender Permissions:

@joergh

Nein. Ganz "normal" über Apps in Unraid.

Da kann ich dir leider nicht helfen .!

Für andere mitlesende als Info von dir :

Aber , welche NAS hast du
und zeige mal die Full -Ausgabe von

iob diag

Sehr schade.

Das ist mein "alter" PC mit Unraid auf USB Stick.

iob diag bringt keinerlei Ausgabe wenn ich das im Container ausführe...

[Glasfaser]

@joergh

iob stop
iob fix
iob start

dann

iob diag

[JoergH]

@glasfaser
Das funktioniert im Container anders. Um den iob zu stoppen muss man pkill nehmen und dann den fix laufen lassen und anschliessend den Container stoppen und neu starten.
Der macht aber bei jedem Start immer einen Check und setzt die Permissions neu.
diag kann er auch nach dem fix nicht...

[Glasfaser]

@joergh sagte in Kein Backup aufgrund fehlender Permissions:

diag kann er auch nach dem fix nicht...

curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

[JoergH]

@glasfaser sagte in Kein Backup aufgrund fehlender Permissions:

curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

======================= SUMMARY =======================
v.2023-04-16

Operatingsystem: Debian GNU/Linux 11 (bullseye)
Kernel: 5.19.17-Unraid
Installation: Docker
Timezone: Etc/UTC
User-ID: 0
X-Server: false

Pending OS-Updates: 0
Pending iob updates: 0

Nodejs-Installation: /usr/bin/nodejs v18.16.0
/usr/bin/node v18.16.0
/usr/bin/npm 9.5.1
/usr/bin/npx 9.5.1

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
total used free shared buff/cache available
Mem: 31G 5.6G 511M 1.2G 25G 24G
Swap: 0B 0B 0B
Total: 31G 5.6G 511M

Active iob-Instances: 3
Active repo(s): stable

ioBroker Core: js-controller 4.0.24
admin 6.3.5

ioBroker Status: iobroker is running on this host.

Objects type: jsonl
States type: jsonl

Status admin and web instance:

• system.adapter.admin.0 : admin : 2b4afc16c5c3 - enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.web.0 : web : 2b4afc16c5c3 - disabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects: 28188
States: 23406

Size of iob-Database:

25M /opt/iobroker/iobroker-data/objects.jsonl
5.4M /opt/iobroker/iobroker-data/states.jsonl

=================== END OF SUMMARY ====================

[Glasfaser]

@joergh

die Full - Ausgabe bitte ( am Anfang )

[JoergH]

@glasfaser sagte in Kein Backup aufgrund fehlender Permissions:

@joergh

die Full - Ausgabe bitte ( am Anfang )

Ok, Du hast es so gewollt

Spoiler

======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Architecture    : x86_64
Docker          : v8.0.0
Virtualization  : Unknown (buanet/Synology?)
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 19:24:19 up 2 days,  3:25,  0 users,  load average: 6.41, 6.45, 8.04
CPU threads: 16


*** Time and Time Zones ***
Mon Apr 17 17:24:19 UTC 2023
Mon Apr 17 19:24:19 CEST 2023
CEST +0200
Etc/UTC

*** User and Groups ***
root
/root
root

*** X-Server-Setup ***
X-Server:       false
Desktop: 
Terminal: 


*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:             31G        5.6G        390M        1.2G         25G         24G
Swap:             0B          0B          0B
Total:           31G        5.6G        390M

        31977 M total memory
         5596 M used memory
        19817 M active memory
         6499 M inactive memory
          399 M free memory
            0 M buffer memory
        25981 M swap cache
            0 M total swap
            0 M used swap
            0 M free swap

*** FILESYSTEM ***
Filesystem            Type       Size  Used Avail Use% Mounted on
/dev/mapper/nvme0n1p1 btrfs      932G   66G  866G   8% /
tmpfs                 tmpfs       64M     0   64M   0% /dev
tmpfs                 tmpfs       16G     0   16G   0% /sys/fs/cgroup
shm                   tmpfs       64M     0   64M   0% /dev/shm
shfs                  fuse.shfs  932G   66G  866G   8% /opt/iobroker
/dev/mapper/nvme0n1p1 btrfs      932G   66G  866G   8% /etc/hosts

Messages concerning ext4 filesystem in dmesg:

Show mounted filesystems (real ones only):
TARGET SOURCE                                                                                                                       FSTYPE OPTIONS
/      /dev/mapper/nvme0n1p1[/system/docker/installed/btrfs/subvolumes/a764796ea53e73d4d1a7bbfd7a7da26a4361d52997353dccddc58ff2325abd33]
|                                                                                                                                   btrfs  rw,noat
|-/opt/iobroker
|      shfs[/appdata/iobroker/data]                                                                                                 fuse.s rw,nosu
|-/opt/userscripts
|      shfs[/appdata/iobroker/scripts]                                                                                              fuse.s rw,nosu
|-/etc/resolv.conf
|      /dev/mapper/nvme0n1p1[/system/docker/installed/containers/2b4afc16c5c329d95cb401eea18df52817839c7478076788de46b9bdcc5c629a/resolv.conf]
|                                                                                                                                   btrfs  rw,noat
|-/etc/hostname
|      /dev/mapper/nvme0n1p1[/system/docker/installed/containers/2b4afc16c5c329d95cb401eea18df52817839c7478076788de46b9bdcc5c629a/hostname]
|                                                                                                                                   btrfs  rw,noat
`-/etc/hosts
       /dev/mapper/nvme0n1p1[/system/docker/installed/containers/2b4afc16c5c329d95cb401eea18df52817839c7478076788de46b9bdcc5c629a/hosts]
                                                                                                                                    btrfs  rw,noat

Files in neuralgic directories:

/var:
33M     /var/
30M     /var/lib
18M     /var/lib/apt/lists
18M     /var/lib/apt
13M     /var/lib/dpkg



/opt/iobroker/backups:
16K     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
308M    /opt/iobroker/iobroker-data/
274M    /opt/iobroker/iobroker-data/files
51M     /opt/iobroker/iobroker-data/files/javascript.admin
48M     /opt/iobroker/iobroker-data/files/telegram.admin
32M     /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
25M     /opt/iobroker/iobroker-data/objects.jsonl
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map
8.5M    /opt/iobroker/iobroker-data/files/vis.0/Homematic_Steuerung/img/Eigene_Bilder/20180322_153925_HDR.jpg
7.2M    /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js
7.2M    /opt/iobroker/iobroker-data/files/ham.admin/static/js/main.8080bc0b.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages
     12.22.5~dfsg-2~11u1 500
        500 http://deb.debian.org/debian bullseye/main amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : 2b4afc16c5c3                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : 2b4afc16c5c3                             -  enabled
  system.adapter.birthdays.0              : birthdays             : 2b4afc16c5c3                             - disabled
  system.adapter.daikin-cloud.0           : daikin-cloud          : 2b4afc16c5c3                             - disabled
  system.adapter.denon.0                  : denon                 : 2b4afc16c5c3                             - disabled
  system.adapter.discovery.0              : discovery             : 2b4afc16c5c3                             - disabled
  system.adapter.dwd.0                    : dwd                   : 2b4afc16c5c3                             - disabled
  system.adapter.exchangerates.0          : exchangerates         : 2b4afc16c5c3                             - disabled
  system.adapter.fb-checkpresence.0       : fb-checkpresence      : 2b4afc16c5c3                             - disabled
  system.adapter.firetv.0                 : firetv                : 2b4afc16c5c3                             - disabled
  system.adapter.fullybrowser.0           : fullybrowser          : 2b4afc16c5c3                             - disabled
  system.adapter.go-e.0                   : go-e                  : 2b4afc16c5c3                             - disabled
  system.adapter.ham.0                    : ham                   : 2b4afc16c5c3                             - disabled
  system.adapter.hm-rega.0                : hm-rega               : 2b4afc16c5c3                             - disabled
  system.adapter.hm-rpc.0                 : hm-rpc                : 2b4afc16c5c3                             - disabled, port: 18701
  system.adapter.hm-rpc.3                 : hm-rpc                : 2b4afc16c5c3                             - disabled, port: 0
  system.adapter.hm-rpc.4                 : hm-rpc                : 2b4afc16c5c3                             - disabled, port: 0
  system.adapter.hm-rpc.5                 : hm-rpc                : 2b4afc16c5c3                             - disabled, port: 0
  system.adapter.ical.0                   : ical                  : 2b4afc16c5c3                             - disabled
  system.adapter.ical.1                   : ical                  : 2b4afc16c5c3                             - disabled
  system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: 2b4afc16c5c3                             - disabled
  system.adapter.icons-icons8.0           : icons-icons8          : 2b4afc16c5c3                             - disabled
  system.adapter.icons-material-png.0     : icons-material-png    : 2b4afc16c5c3                             - disabled
  system.adapter.icons-material-svg.0     : icons-material-svg    : 2b4afc16c5c3                             - disabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : 2b4afc16c5c3                             - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : 2b4afc16c5c3                             - disabled
  system.adapter.influxdb.0               : influxdb              : 2b4afc16c5c3                             - disabled, port: 8086
  system.adapter.info.0                   : info                  : 2b4afc16c5c3                             - disabled
  system.adapter.javascript.0             : javascript            : 2b4afc16c5c3                             - disabled
  system.adapter.mielecloudservice.0      : mielecloudservice     : 2b4afc16c5c3                             - disabled
  system.adapter.mihome-vacuum.1          : mihome-vacuum         : 2b4afc16c5c3                             - disabled, port: 54321
  system.adapter.modbus.0                 : modbus                : 2b4afc16c5c3                             - disabled
  system.adapter.mqtt.0                   : mqtt                  : 2b4afc16c5c3                             - disabled, port: 1883, bind: 0.0.0.0
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : 2b4afc16c5c3                             - disabled
  system.adapter.octoprint.0              : octoprint             : 2b4afc16c5c3                             - disabled
  system.adapter.odl.0                    : odl                   : 2b4afc16c5c3                             - disabled
  system.adapter.openweathermap.0         : openweathermap        : 2b4afc16c5c3                             - disabled
  system.adapter.pollenflug.0             : pollenflug            : 2b4afc16c5c3                             - disabled
  system.adapter.powerfox2.0              : powerfox2             : 2b4afc16c5c3                             - disabled
  system.adapter.pvforecast.0             : pvforecast            : 2b4afc16c5c3                             - disabled
  system.adapter.renault.0                : renault               : 2b4afc16c5c3                             - disabled
  system.adapter.sayit.0                  : sayit                 : 2b4afc16c5c3                             - disabled, port: 0
  system.adapter.schoolfree.0             : schoolfree            : 2b4afc16c5c3                             - disabled
  system.adapter.shelly.0                 : shelly                : 2b4afc16c5c3                             - disabled, port: 1882, bind: 0.0.0.0
  system.adapter.sourceanalytix.0         : sourceanalytix        : 2b4afc16c5c3                             - disabled
  system.adapter.telegram.0               : telegram              : 2b4afc16c5c3                             - disabled, port: 8443, bind: 0.0.0.0
  system.adapter.tesla-motors.0           : tesla-motors          : 2b4afc16c5c3                             - disabled
  system.adapter.tr-064.0                 : tr-064                : 2b4afc16c5c3                             - disabled
  system.adapter.trashschedule.0          : trashschedule         : 2b4afc16c5c3                             - disabled
  system.adapter.vaillant.0               : vaillant              : 2b4afc16c5c3                             - disabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : 2b4afc16c5c3                             - disabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : 2b4afc16c5c3                             - disabled
  system.adapter.vis-google-fonts.0       : vis-google-fonts      : 2b4afc16c5c3                             - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : 2b4afc16c5c3                             - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : 2b4afc16c5c3                             - disabled
  system.adapter.vis-inventwo.0           : vis-inventwo          : 2b4afc16c5c3                             - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : 2b4afc16c5c3                             - disabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : 2b4afc16c5c3                             - disabled
  system.adapter.vis-plumb.0              : vis-plumb             : 2b4afc16c5c3                             - disabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : 2b4afc16c5c3                             - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : 2b4afc16c5c3                             - disabled
  system.adapter.vis-weather.0            : vis-weather           : 2b4afc16c5c3                             - disabled
  system.adapter.vis.0                    : vis                   : 2b4afc16c5c3                             - disabled
  system.adapter.web.0                    : web                   : 2b4afc16c5c3                             - disabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : 2b4afc16c5c3                             -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "backitup"     : 2.6.16   , installed 2.6.16
Adapter    "birthdays"    : 2.2.0    , installed 2.2.0
Adapter    "denon"        : 1.15.0   , installed 1.15.0
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "dwd"          : 2.8.3    , installed 2.8.3
Adapter    "exchangerates": 0.0.14   , installed 0.0.14
Adapter    "fb-checkpresence": 1.1.26, installed 1.1.26
Adapter    "firetv"       : 1.0.0    , installed 1.0.0
Adapter    "fullybrowser" : 2.1.2    , installed 2.1.2
Adapter    "go-e"         : 1.0.27   , installed 1.0.27
Adapter    "ham"          : 5.3.1    , installed 5.3.1
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.16  , installed 1.15.16
Adapter    "ical"         : 1.13.2   , installed 1.13.2
Adapter    "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-material-svg": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.19   , installed 1.9.19
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "mielecloudservice": 6.4.0, installed 6.4.0
Adapter    "mihome-vacuum": 3.9.5    , installed 3.9.5
Adapter    "modbus"       : 5.0.11   , installed 5.0.11
Adapter    "mqtt"         : 4.0.7    , installed 4.0.7
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "octoprint"    : 4.0.0    , installed 4.0.0
Adapter    "odl"          : 2.0.5    , installed 2.0.5
Adapter    "openweathermap": 0.3.3   , installed 0.3.3
Adapter    "pollenflug"   : 1.0.6    , installed 1.0.6
Adapter    "powerfox2"    : 0.0.12   , installed 0.0.12
Adapter    "pvforecast"   : 2.3.0    , installed 2.3.0
Adapter    "renault"      : 0.0.15   , installed 0.0.15
Adapter    "sayit"        : 1.12.3   , installed 1.12.3
Adapter    "schoolfree"   : 1.1.1    , installed 1.1.1
Adapter    "shelly"       : 6.3.1    , installed 6.3.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "telegram"     : 1.15.2   , installed 1.15.2
Adapter    "tesla-motors" : 1.3.2    , installed 1.3.2
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "vaillant"     : 0.1.2    , installed 0.1.2
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter    "vis-hqwidgets": 1.3.0    , installed 1.3.0
Adapter    "vis-icontwo"  : 0.93.0   , installed 0.93.0
Adapter    "vis-inventwo" : 3.3.1    , installed 3.3.1
Adapter    "vis-justgage" : 1.0.2    , installed 1.0.2
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0

Objects and States
Please stand by - This may take a while
Objects:        28188
States:         23406

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian-security bullseye-security InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists... Done                       
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      99         15054269   132/iobroker.js-con 
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      99         15040174   132/iobroker.js-con 
tcp6       0      0 :::8081                 :::*                    LISTEN      99         15056164   161/io.admin.0      

*** Log File - Last 25 Lines ***

2023-04-17 19:15:30.255  - error: host.2b4afc16c5c3 iobroker npm-install: host.2b4afc16c5c3 Unknown packetName sourceanalytix. Please install packages from outside the repository using npm!
2023-04-17 19:15:31.267  - info: host.2b4afc16c5c3 iobroker npm-install: exit 12
2023-04-17 19:15:32.267  - warn: host.2b4afc16c5c3 startInstance cannot find adapter "daikin-cloud@0.2.3". Try to install it... 2 attempt
2023-04-17 19:15:32.267  - info: host.2b4afc16c5c3 iobroker install daikin-cloud@0.2.3 using installedFrom
2023-04-17 19:15:33.985  - info: host.2b4afc16c5c3 iobroker npm-install: NPM version: 9.5.1
2023-04-17 19:15:33.986  - info: host.2b4afc16c5c3 iobroker npm-install: Installing iobroker.daikin-cloud@0.2.3... (System call)
2023-04-17 19:15:35.511  - error: host.2b4afc16c5c3 iobroker npm-install: host.2b4afc16c5c3 Cannot install iobroker.daikin-cloud@0.2.3: 1
2023-04-17 19:15:36.521  - info: host.2b4afc16c5c3 iobroker npm-install: exit 25
2023-04-17 19:15:36.944  - debug: backitup.0 (215) mount activ... umount in 2 Seconds!!
2023-04-17 19:15:37.522  - warn: host.2b4afc16c5c3 startInstance cannot find adapter "daikin-cloud@0.2.3". Try to install it... 3 attempt
2023-04-17 19:15:37.522  - info: host.2b4afc16c5c3 iobroker install daikin-cloud@0.2.3 using installedVersion
2023-04-17 19:15:38.970  - debug: backitup.0 (215) umount successfully completed
2023-04-17 19:15:39.259  - info: host.2b4afc16c5c3 iobroker npm-install: NPM version: 9.5.1
2023-04-17 19:15:39.259  - info: host.2b4afc16c5c3 iobroker npm-install: Installing iobroker.daikin-cloud@0.2.3... (System call)
2023-04-17 19:15:40.405  - info: admin.0 (161) ==> Connected system.user.admin from ::ffff:172.17.0.1
2023-04-17 19:15:41.082  - error: host.2b4afc16c5c3 iobroker npm-install: host.2b4afc16c5c3 Cannot install iobroker.daikin-cloud@0.2.3: 1
2023-04-17 19:15:41.578  - info: admin.0 (161) ==> Connected system.user.admin from ::ffff:172.17.0.1
2023-04-17 19:15:42.096  - info: host.2b4afc16c5c3 iobroker npm-install: exit 25
2023-04-17 19:15:43.096  - warn: host.2b4afc16c5c3 startInstance cannot find adapter "daikin-cloud@0.2.3". Try to install it... 4 attempt
2023-04-17 19:15:43.096  - info: host.2b4afc16c5c3 iobroker install daikin-cloud@0.2.3 using installedVersion
2023-04-17 19:15:44.895  - info: host.2b4afc16c5c3 iobroker npm-install: NPM version: 9.5.1
2023-04-17 19:15:44.896  - info: host.2b4afc16c5c3 iobroker npm-install: Installing iobroker.daikin-cloud@0.2.3... (System call)
2023-04-17 19:15:46.375  - error: host.2b4afc16c5c3 iobroker npm-install: host.2b4afc16c5c3 Cannot install iobroker.daikin-cloud@0.2.3: 1
2023-04-17 19:15:47.384  - info: host.2b4afc16c5c3 iobroker npm-install: exit 25
2023-04-17 19:15:48.384  - error: host.2b4afc16c5c3 Cannot download and install adapter "daikin-cloud@0.2.3". To retry it disable/enable the adapter or restart host. Also check the error messages in the log!

============ Mark until here for C&P =============

[Homoran]

@joergh sagte in Kein Backup aufgrund fehlender Permissions:

load average: 6.41, 6.45, 8.04

was treibst du da?

[JoergH]

@homoran Was besagt das? CPU Last?

[Glasfaser]

@joergh sagte in Kein Backup aufgrund fehlender Permissions:

2023-04-17 19:15:41.082 - error: host.2b4afc16c5c3 iobroker npm-install: host.2b4afc16c5c3 Cannot install iobroker.daikin-cloud@0.2.3: 1
2023-04-17 19:15:47.384 - info: host.2b4afc16c5c3 iobroker npm-install: exit 25

Auszug :

Der röddelt aber ganz schön nach deinem Log

Dazu gibt es zb. ein Thread :
https://forum.iobroker.net/topic/57337/fehler-25-217-oder-enotempty-bei-adapter-install-update

[Homoran]

@joergh sagte in Kein Backup aufgrund fehlender Permissions:

@homoran Was besagt das? CPU Last?

nicht nur, auch I/O Vorgänge.

selbst wenn du 16 Kerne hättest, wäre der Rechner zu 50% ausgelastet

[JoergH]

@glasfaser sagte in Kein Backup aufgrund fehlender Permissions:

@joergh sagte in Kein Backup aufgrund fehlender Permissions:

2023-04-17 19:15:41.082 - error: host.2b4afc16c5c3 iobroker npm-install: host.2b4afc16c5c3 Cannot install iobroker.daikin-cloud@0.2.3: 1
2023-04-17 19:15:47.384 - info: host.2b4afc16c5c3 iobroker npm-install: exit 25

Auszug :

Der röddelt aber ganz schön nach deinem Log

Dazu gibt es zb. ein Thread :
https://forum.iobroker.net/topic/57337/fehler-25-217-oder-enotempty-bei-adapter-install-update

Der Daikin Adapter läuft nicht mit Nodejs 18, ist also "normal"...habe ich noch nicht aus dem iob geschmissen, aber die laufen eh alle nicht bis auf die Grundadapter bisher...